main
7
Commits
| Author | SHA1 | Message | Date | |
|---|---|---|---|---|
  adminandClaude Opus 5.5
|
14972d057f |
Refactoring round 8: hide data files, safe saves, Esc as Cancel (#85)
Recurring cleanup round over the code since round 7 (
|
||
|
rootandClaude Opus 5
|
8143130ed2 |
A shared value belongs to no behavior, so it becomes an asset of its own (#91)
game-maker / suite (push) Failing after 8m59s
This reverses the design of the previous commit. `PropertyDef.scope` is gone without replacement: a behavior variable is an object property again, without exception, and sharing is something you point at rather than something you declare twice. A **Variables asset** is declarations and nothing else -- no graph, no position, never placed, no tab of its own (`TAB_OF_ASSET` is already `Partial<>`, so that costs no line). A `Variables` node names one through its new `variablesAsset` setting, empty meaning the behavior's own variables as before, and then reads and writes one value per key for the whole run. Its property list follows the chosen source, which was the actual request: a value another graph declared is now offerable, where before every participant had to declare the name itself. That deletes more than it adds (-72 lines net): `globalConflicts` and its run-stopping kind clash, `SetVariableScopeCommand`, the scope picker, both object-inspector filters and the "shared by the whole run" note on the placed object. A typo is no longer a silent second variable -- naming an asset is picking from a list. And two Variables assets may carry the same key without meeting, because the asset is the key, not the name. The one shape it copies is the one that already existed: `Set state` picks its machine the same way. Lifetime is unchanged. The bag is built at `BehaviorSystem.start()` from the declarations and never written back, so playing in the editor cannot change the project -- which is the whole reason a counter must not be an object property (`World.syncToModel` would `commit()` it, and the coin counter would stand at 7 for good). Full symmetry across that gap, without mirroring anything. Two named wires: `Inspector.liveVariables` shows the values as they stand while a run is on and falls back to the declarations when it ends, and `adoptDeclarations()` takes a key into the run *only where the document changed it since the last sync*. Without that condition any unrelated project edit would snap a running counter back to its starting value; a counter-test bends exactly that and falls over. Nothing was ever cached, incidentally: `GraphInterpreter` only pulse-caches nodes without a `read`, and the variable node has one. The wire was missing. The state machine `Scope` row is now an ordinary `enum` row through `createFieldRow`. It was hand-built from an `HStack` with a ghost dropdown and began ~34px left of every value above it; the explanations beside `Local` and `Global` are gone from the menu, the sentence below the row keeps saying it. Machine scope is otherwise untouched -- `StateMachineAsset.scope`, `SetMachineScopeCommand`, `stateBag()` and its persistence all stand, so #59 stays closed as built and `Scope` as a type now carries machines alone. Six counter-proofs, each biting at its own guard. One of them did not bite at first: the suggestion list was computed twice, in `nodeSection` and `portSection`, so only the browser test covered the request itself. It is one named function now, `variableChoices`, with a unit test of its own. Co-Authored-By: Claude Opus 5 <noreply@anthropic.com> |
||
|
rootandClaude Fable 5.1
|
e7d82bd1a9 |
State machines: asset, tab, State branch and Set state nodes (#51)
A state machine is an asset whose graph holds one `State` node per state (no ports, name as title), edited in a new "State machine" tab that reuses the graph canvas: right-click places "State n", snap toggle shared with the Behavior tab via SnapToggle. `statemachine` is a value kind like texture (port, literal node, variable, struct field, tagged list item). Behaviors use it through `State branch` (one exec output per state) and `Set state` (one exec input per state; the interpreter now hands `run` the entry port). States live per behavior instance in NodeContext.states, with no initial state. Ports derive from the inline picker or a wired `State machine` literal; BehaviorLookup became GraphLookup with behavior(id) and machine(id). The Graph tab is labelled "Behavior" (key unchanged). Unit tests (state-machine, kinds, catalog, ports), e2e step 26 and README added. Co-Authored-By: Claude Fable 5.1 <noreply@anthropic.com> |
||
|
rootandClaude Opus 5
|
7c63c884ef |
Replace the five variable nodes with one Variables node
A single node now lists any number of variables. Every entry is an output that reads the current value whenever it is pulled; an entry switched to Set is also an input and is written when the flow arrives. Exec pins only exist while at least one entry writes, and all inputs are read before any write, so one node can swap two variables. Get/Set variable, Get/Set variables and Variable are gone. Old project files are converted on load: each old node becomes a Variables node with the same variables, edges and typed values. A written port without a typed value now shows the zero of its kind on the node body, matching what the inspector shows and what the run writes. Co-Authored-By: Claude Opus 5 <noreply@anthropic.com> |
||
|
rootandClaude Opus 5
|
854ae2e756 |
Add Get/Set properties nodes and a breadcrumb for opened sub-behaviors
Get properties / Set properties work like their variable counterparts:
one port per chosen property, an unconnected input writes its inline
value. A port chosen from the built-in list keeps that property's field
and default (height starts at 100, color is a colour field). "object" is
reserved for the fixed input, checked by the command and on load.
The property picker names the owning type ("Sprite width"), and text
fields can now carry a suggestion list; Get/Set property use it.
Double-clicking a call node shows the path of opened behaviors under the
graph header. Clicking an entry jumps back and trims the path; choosing
a behavior any other way hides it. Reopening a behavior already on the
path steps back to it instead of repeating it. The bar shows before the
graph switches, otherwise it clips the graph that was just fitted.
The "Add node..." header button is gone; nodes come from the context menu.
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
|
||
|
rootandClaude Opus 5
|
fe3c63c48c |
Collapse Tetris' variable clusters, and give the long runs a home
Next move held four clusters of Set variable in a row, fourteen single nodes
in all; clear-lines read three variables one after the other. They are now
one plural node each, which takes Next move 40 -> 30 nodes and clear-lines
25 -> 23. Every remaining single node was checked and really is single: ok/no
are the same variable in opposite branches, take/keep the same one across a
write, and the three key setters hang on three different events.
Two contracts carry those merges, both pinned as tests. Set variables writes
per port with writeTyped exactly as the singular node does, so a Pack{rot}
still merges instead of overwriting - without it, turning would have erased
the other three fields. And the interpreter collects every input before the
node runs, so no input may come from a variable the same node writes; a data
node is evaluated once per pulse and keeps its answer. That second rule is
invisible in the game, because OnUpdate re-reads each frame and heals it, so
it lives in a unit test rather than in the smoke.
/opt/node22 and /opt/npm are gone from the tree. build.sh ran into the empty
path once they were moved away; the other seven mentions were documentation.
e2e.sh and check.sh replace the bare npm calls. A long run does not survive
the end of its shell - four full e2e runs died mid-suite with oom_kill 0 -
so e2e.sh start hands the run to a transient game-maker-e2e.service, which
does. e2e.sh status reports the running job or the last result, and calls a
log without a closing line ABORTED rather than reporting the passes it got
to. Both scripts end on an explicit exit line, because set -o pipefail inside
a script does not protect the caller: measured, ./check.sh | tail still
reports 0. Logs carry a timestamp and land in logs/, which is ignored.
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
|
||
|
rootandClaude Opus 5
|
f60358c951 |
Let a list hold structs, and read or write variables in bundles
A list item may now be a struct. The depth is bounded in the declaration
rather than by a comment: FieldKind (number|text|boolean|color) says what a
struct field holds, ListItemKind adds struct on top and says what a list
holds, so list -> struct -> primitive is the deepest storable shape and
sameValue stays finite. A struct item renders inline in the List tab, which
is why it needs no path in the slot address.
Four paths silently assumed a list item was a primitive: sameValue compared
items with ===, textOf would have printed [object Object], asListItem turned
a struct into text on Set item and Fill, and Index of used indexOf, which is
reference equality and could never have found a struct.
Tetris now runs on bundles. shapes is 112 {x, y} structs instead of 224 loose
numbers, piece and the candidate are structs, so Next move hands back a whole
candidate and each strand packs only the field it changes, since mergeStruct
leaves the rest standing. Declared behavior ports drop 49 -> 35, the master's
variables 18 -> 13, its graph 84/94 -> 69/76 nodes/edges.
Get variables and Set variables declare their ports from a list of variable
names, the way Pack and Expand already do, so one node can read or write
several at once. Renaming a variable rewires them, because there the port key
is the variable name.
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
|