main
14
Commits
| Author | SHA1 | Message | Date | |
|---|---|---|---|---|
  adminandClaude Opus 5.5
|
c74b6b1cab |
Show where an inspector row can be dragged and answer the pointer
After #310 rows could be dragged by their mark, but nothing said which marks take a drag, and the pointer on one changed nothing but the cursor. - A mark that drags is now a Grip: the same widget wrapped, the same size, so the value column stays where it was. Once sortBlocks takes it, it carries six faint dots at its left edge. - Marks that cannot drag stay plain: the variables of a placed object and the fields of a typed struct show no dots. - With the pointer on a grip its dots light up and the whole block that would move is washed in the accent colour, a struct with its fields. While the block is carried the wash gives way to the dimming, and the grip stays lit. - While a block is carried the other grips let the pointer pass: no lit dots, no wash. Every grip of the column shows grabbing instead of grab until the drop. - The wash first used controlHover like list rows. In the inspector it is darker than the panel and vanished next to the dark fields, so it became the accent at 15 percent, the colour of the drop line. - __gm.inspectorMark also reports the dots: none, idle or lit. Tests: - Gate on melektaus-atx: 236 files, 3576 tests (+4 in block-drag.test.ts, one of them a drag passing over another grip). - e2e 22: 40 checks (+1, sum 1740). 22f-iii reads idle dots, moves the mouse onto the mark and reads them lit. - Two counter-checks bite: no wash on hover fails 1 test, grips never made grabbable fail 3. A third: hover ignoring the drag fails 1. - Screenshots of a lit single row and a lit struct block looked at. Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> |
||
|
adminandClaude Opus 5.5
|
2c19c89878 |
Let variables, fields, ports and list items be dragged into order (#310)
Variables of a behavior, the fields of a struct, the ports of a start or end node and the items of a list could only be added and removed. Changing their order meant removing and adding them again. Now each of them is dragged by the mark in front of its row. - sortBlocks (ui/blockDrag.ts) makes the rows of one column sortable. A block is every row it covers, so a struct moves with its fields and a list item with its nested list. The block is dimmed while it is carried, an accent line shows where it lands, and a scrolled panel follows the pointer at its edge. Less than 4 px stays a click. - The arithmetic is pure and lives in ui/sortable.ts: blockGap, gapLineY, dropSlot and edgeScroll. dropIndex of the tile strip moved there too, so the reorder maths sits in one file. - MoveVariableCommand, MoveStructFieldCommand and MovePortCommand build on the existing MoveCommand. Undo moves back. - Lists need no command. InlineList replaces the list as a whole, as it does for every other edit of its items. - The grip is the kind mark, for a list item its number. Moving only happens among siblings: a field stays in its struct. - On a Struct asset the move runs through WithStructTypes. Typed variables, Pack/Expand ports and split outputs follow the new order. - Values and edges hang on names, so only the order changes. Nodes running a behavior read their ports from the start node, the new order reaches them without a copy. - Not sortable by design: the variables of a placed object, the fields of a typed struct (moved on the Struct asset) and the picked ports of Variables/Properties nodes. - Test hook __gm.inspectorMark(label) finds the mark of a row. Tests: - Gate on melektaus-atx: 235 files, 3572 tests, CHECK EXIT 0 (+9). - tests/core/reorder.test.ts: a variable, a field two levels deep, a Struct asset reaching a typed variable and Pack, and start ports reaching the calling node with edges and result kept. - e2e 22: ALL PASSED, 39 checks (+4, sum 1739). 22f-iii drags a variable past a struct of several rows, then a field inside it. - Counter-probes: dropSlot by top edge instead of middle and a field move that ignores its path fail 3 unit tests. With sortBlocks switched off, the three order checks of 22f-iii fail. Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> |
||
|
adminandClaude Opus 5.5
|
4857bb75e6 |
Show lists in the inspector and variables in their own tab (#252)
The List tab could show one list at a time and was the only place to see its items. A list now shows its items right where it lives, and a new Variables tab shows all variables of an asset or placed object. - InlineList draws the items of a list under its row in the inspector, in struct fields and in the Variables tab. A list inside a list or a struct field is drawn the same way, one step indented. - The index column is the indent. Items sit under their list without an own margin, and the index column is 16 px wide instead of 28 px. - Above 20 items (INLINE_LIMIT) the rest collapses into "... N more - open in tab". During a run the rows show the values from the game. - ListHead puts "N items" and "+ Item" in one row. "N items" opens the list in a tab. A separate Open button squeezed the counter to zero width in the narrow inspector column. - VariablesEditor shows every variable of a behavior asset, a variables asset or a placed behavior. On an asset it edits the declarations. On a placed object an edit only overrides that object, with the usual reset and push buttons. - Opening a list inside a tab adds a new tab and keeps the open one. valuesKey gives each list its own document, so a list that is already open is shown instead of opened twice. - Titles read "Pickup · Variables" or "Listy · nums · [3]". The tab closes when its asset or object is deleted. - Lists on node inputs stay inline only, a node owns no variables. - The List tab, ListEditor and the __gm.list hook are gone. Tests: - ./check.sh: 181 files, 2645 tests, CHECK EXIT 0 - GM_STEPS=1,21,22,32: ALL PASSED, 123 checks - e2e 21 is rewritten for inline lists and the new tab, 22 and 32 are adapted. Sum in README: 1486 (+6 in 21, -1 in 22), counted by hand. - Counter-probes fail as expected: sub-lists not told apart (1 unit test), sub-list replacing the open tab, all items drawn inline (60 rows instead of 20), no live values (0 rows at 24 items in a run). Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> |
||
|
adminandClaude Opus 5.5
|
0c5ac32b59 |
Let structs and lists nest to any depth (#239)
Structs and lists were capped at two fixed levels (list of structs, struct with a list field). Anything deeper was dropped silently on load, in node settings and when written to a variable. The cap came from an early design choice, not from a technical need, so it is lifted completely instead of adding a third fixed level. - One kind list NESTED_KINDS replaces ListItemKind and StructFieldKind. The flat special cases in listItems.ts are gone, every value goes through one recursive path. - A struct inside a struct is declared, like a top-level struct. Values coming in over an edge are brought into that shape. Struct items in lists still take their fields from the value. - New valuePath.ts addresses any nested spot by keys and indices. ListSlot.field is now ListSlot.path. - Field commands (add, rename, remove) take the path to the struct. They change declaration, own value and all overrides in one undo step, as before on the top level. - Inspector: "+ Field" offers Struct and List on every level. A nested struct is a header row with its own "+ Field", its fields are indented one step further. - List tab: a list item shows "n items" and opens one level deeper. The title shows the path, e.g. "Listy · nums · [3]". - Pack in Pack now writes a struct into a struct field instead of text. Objects are kept at any depth and stripped at every exit. - A list edit in a struct field without an existing object override now starts from the shown value instead of an empty struct. - Old projects load unchanged. Save, load and save again gives the same result. Tests: - ./check.sh: 172 files, 2498 tests, CHECK EXIT 0 - e2e 21 + 22: ALL PASSED, 90 checks (new 21d-iii, 22f-ii, 21d and 22f updated) - 20 new unit tests in nested-values.test.ts and nested-list-slot.test.ts, three tests that pinned the old cap turned around - 6 counter-probes, each fails 1 to 8 tests, originals restored and checked with cmp - Not covered: a nested struct inside a struct item in the list tab has no e2e click Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> |
||
|
adminandClaude Opus 5.5
|
0e8585665a |
Load the 500 weight and draw missing glyphs as SVG icons (#214)
The theme asks for Source Sans 3 at weight 500, but fonts.ts only
loaded 400, 600 and 700. The browser synthesised the 500 text. The
issue comment also asked for the symbols the font lacks to become SVG
icons. A scan of src/ against the font's cmap found 20 such characters
in 30 places.
- fonts.ts loads source-sans-3-latin-500-normal.woff2 as well.
- Menus draw their ticks and the "current" dot as icons. The dot is a
new MenuItem.current field and no longer part of the label text.
- Inspector action buttons (reset, apply, fit width/height) are
icons. The menu arrow behind them is the drawn Dropdown chevron.
- Kind marks come from a table in markIcons.ts. Picture kinds use an
icon, # and Aa stay text because the font has them.
- Scene marks in the asset panel, sound play/stop and the transition
arrows are icons too.
- Apply is an icon although the font has the arrow. It sits next to
the reset icon and would look different as a glyph.
- A new Icon widget draws on redraw like Button, so Node tests need no
DOMParser.
- Tests find icons through the SVG id. The new hook
__gm.locateIcons(id) and the harness helpers findIcon/clickIcon
replace locate() on the old characters.
Findings:
- Weight 700 is loaded but the theme never uses it. Left as is.
- The old scene-mark check in module 35 accepted any play glyph on
screen. It now checks the mark on the start scene's row.
- Module 44 needs the textures from module 37 and fails without it.
Tests:
- ./check.sh: 145 files, 2187 tests, exit 0 (before 144 / 2143).
- New tests/ui/fonts.test.ts: every theme weight is loaded, and every
character in src/ exists in every shipped face. The cmap reader
matches fontTools (231 characters).
- Icon tests cover the 19 new files. Each kind mark is either an
icon or text, never both.
- e2e 1-16,22,30,34,35,43,44: 586 green, 0 FAIL, then 44 stopped
for lack of module 37. e2e 1-16,37,44,47,48: 618 green.
e2e 1-14 on the final build: 454 green.
- Two new e2e checks: loaded weights in 14, a reset icon pixel in 04.
- Counter-probes all fail as expected: 500 removed, a play glyph put
back, the struct icon removed (one unit test each). In the browser,
500 removed and reset icon hidden fail exactly the two new checks.
- Editor-suite check sum 1312 (1310 measured by CI at
|
||
|
adminandClaude Opus 5
|
4f546c0e08 |
Number fields drop trailing zeros: formatNumber still rounds to at most 3 decimals and then removes zeros at the end, so 100.000 reads 100 and 0.500 reads 0.5, everywhere (inspector, graph and shader nodes, duration and fps in the animation and tile tabs); a field's own decimals is now an upper limit, stored values are unchanged, -0 still shows as 0, and the graph's separate integer rule is gone (#172)
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com> |
||
|
admin
|
7e5003b590 |
A test that waits for a deadline somebody guessed is waiting for the wrong thing, so it waits for the editor (#93)
game-maker / suite (push) Successful in 6m48s
The suite spent 88% of its step time asleep: 564 s of steps, 496 s of
them in sleep(n) - fixed spans estimated by hand and then copied from
step to step. That is why it was slow, and why it flickered.
The signal is afterFrames(count, timeout) in ui/render.ts, exposed as
__gm.afterFrames(). It wakes the loop itself, because an editor that
draws nothing would never redeem a promise of a frame, and it gives up
after a timeout instead of hanging the run. settle() in the harness
waits two drawn frames (~32 ms) instead of 150-300 ms and falls back to
sleep(150) when the hook is missing (an old build): silently not
waiting would make every later check a coin toss.
Every action goes through it now - click, doubleClick, wheel, drag,
dragAsset, press, typeText, select, mutate, undo, redo - and with that
about 550 sleep() calls behind those actions became redundant, helpers
that are nothing but a mutate in a coat included. What a frame cannot
answer got its own condition instead: waitUntil(expr), play()/stop()
waiting on __gm.state.mode rather than on 300 ms, saved() for the
autosave (the two hand-written polling loops sampled at 300 ms for
something that arrives after a second), and showTab() as a real tool -
47 places called evaluate("__gm.showTab(...)") raw, and 24 of them
waited for nothing at all and read the old panel.
564 s -> 243 s of step time, the waiting share 88% -> 76%. Three kinds
of wait were kept, and each one bit when it was taken away: loading
bytes (textures, fonts), game time that a repaint cannot stand in for
(time scale, shader and particle clocks, the live values a running
graph carries), and the inertia the scroll step measures on purpose.
Two things the new speed uncovered, both real: 25-animation read the
frame menu unfiltered and had frozen an incomplete list (the CI failure
on
|
||
|
rootandClaude Fable 5.1
|
6471671f7d |
Refactor round: ship web/index.html, drop the remote browser, fix stale comments and README
- `.gitignore` said `index.html` unanchored, which also caught the Vite source page; a fresh clone could neither `dev` nor `build`. Anchored to `/index.html`, page added. - Removed GM_REMOTE (tools/remote/gm-browser.ps1 and the ssh/scp branch in browser.mjs): the Windows test machine is gone and the only flaky check that lived on it is closed (#37). - Removed `npm run preview`, undocumented and unused. - Comments: wrong number in collider.test.ts (250 → 200), the "declarations used to…" history in listItems.ts and friends, the 24 px/28 contradiction, section banners in nodes/index.ts, node-catalog.test.ts and api/index.php, name paraphrases, and the stale step numbers in tools/e2e/11-…23- from the old global count. - README: asset types include `animation`, kind order Number/Text/Boolean, tagged colour and texture items, 6/5 kinds, the `Texture` node, `./build.sh`, PROJECT_FORMAT_VERSION, and the file tree (kinds.ts, listItems.ts, propertyPorts.ts, Breadcrumb.ts, beads.ts, tools/assets/). - tests/helpers.ts takes the duplicated `findObject` and `sceneWithCamera`. Proof: ./check.sh 797 tests, full e2e ALL PASSED 633 checks against this bundle. Co-Authored-By: Claude Fable 5.1 <noreply@anthropic.com> |
||
|
rootandClaude Fable 5.1
|
11c900c998 |
Drop the per-list item declaration; every item carries its own kind
A list no longer says what its items are. ListDef.items, ListDef.fields,
ListFieldDef.items and SetListItemsCommand are gone; the single seam is
src/core/properties/listItems.ts. JSON already tells number, text, boolean
and struct apart, so only two kinds need a tag: {"$color": n} and the new
{"$texture": id}. Field names cannot start with "$", so a tag never
collides with a struct field. On a data link a texture item arrives as
its bare id; the graph has no images.
List tab: the mark in front of each row is the kind picker, "+ Item"
asks for the kind, both are ordinary value edits (one undo step). A list
inside a struct field only offers the flat kinds because the depth rule
forbids a struct item there (ListAccess.kinds); the menu used to offer
it and silently do nothing.
Legacy lists that declared items: 'color' are tagged on load.
Actor demo: the four walk animations and four standing frames live in
two list variables of texture items indexed by facing (Item at), so the
graph can be rebuilt in the editor. The stand frames get their grid ids
back; 44 nodes instead of 46.
Also: the user's edits to on-start-during-play.md and the new note
reseed-because-of-list.md.
Verified: check.sh 794 tests, full e2e 631 checks, smokes 24/19/20.
Co-Authored-By: Claude Fable 5.1 <noreply@anthropic.com>
|
||
|
rootandClaude Opus 5
|
8f92a06c84 |
Consolidate duplicated editor code, trim comments, refresh README
Split GraphCanvas (1076 -> 831 lines) into EdgeLayer and graphMenus; the port and marker menus were the same list and are now one function. Value specs of the inspector and the list tab share valueSpecs.ts, and the remaining copies (compound commands, type glyphs, typed asset lookup, name rule, play/editor world setup, marquee) are merged. Four copies had already drifted apart; merging them fixes: - "Disconnect N links" in the port menu is one undo step, not N - "+ Add collider" is hidden on a placed container instance, as in the hierarchy menu, instead of always failing - a bool property coerced from the text "false" becomes false - a port command on an unknown node type reports instead of crashing Comment-only edits leave the bundle byte-identical. README corrected in 35 places (step limit, jump-run clock, suite duration, 409 body, ...). Co-Authored-By: Claude Opus 5 <noreply@anthropic.com> |
||
|
rootandClaude Opus 5
|
631cf54c72 |
Give every behavior variable one row shape on asset and instance
buildStructBlock only covered structs, so a placed instance drew numbers,
text, bools and lists through createFieldRow on a 64 px name column while
its struct block sat on the asset's grid below it. variableRows.ts now
builds the row for every variable kind on both sides; the edit option
decides what the owner may change (asset: rename, x, item kind; instance:
revert and push). Label and Button take a fixed width so the mark column
no longer shifts names when a list shows its item-kind picker.
The two structFields calls that became dead with
|
||
|
root
|
9f482573e5 |
Show a placed object's struct the way its asset does
The instance inspector drew its own, flatter version of a struct: one row per field, no bundle head. It now draws the same block as the asset side, because there is only one implementation left - both call buildStructBlock. What the instance does not get is everything that touches the shape: renaming a field, '+ Field', and the per-field '×'. The shape belongs to the asset; a placed object overrides values. The revert and override marks sit on the head rather than on a field, since an override covers the whole bundle at once. Underneath this, editing a single field of an unoverridden struct used to blank its siblings: structFieldsOf filled the untouched fields from spec.read, which is object.overrides[key] and therefore undefined until something is overridden. structOf then handed back the empty shape. PreviewedValue carries 'current' now - the resolved value the row actually shows - and the fields come from that. Without it the old path stays, which is right for the asset side, whose prop bag is dense. |
||
|
rootandClaude Opus 5
|
10d030376a |
Finish the struct and list leftovers: inline lists, list fields, item kinds
An unconnected list input is a button into the List tab instead of a number field; a struct field can hold a list, so ListSlot carries an optional field name and the three owner cases only say what sits at a key; and a list variable picks its item kind in the inspector (marker doubles as the chooser), so a list of structs no longer has to be born from a project file. The declaration keeps the storable shapes finite: a struct field may be a list, but that list holds primitives only, so list->struct->primitive and struct->list->primitive are the two deepest forms. check 674, e2e 483, jump-run 24, Tetris 19. Co-Authored-By: Claude Opus 5 <noreply@anthropic.com> |
||
|
rootandClaude Opus 5
|
0449218cb6 |
Let a variable declare struct fields
The value type was already there: StructValue, textOf, sameValue, writeTyped/mergeStruct and the struct port type came with the first part, and Get/Set variable carry any-ports, so a bundle already flowed through the graph unchanged. What was missing was the declaration. PropertyDef gains kind 'struct' with a list of fields, VARIABLE_KINDS a fifth kind, variableDef a fifth parameter. A declared field is a primitive - a list field would need a nested editor and therefore the path in the slot address, the same step "a list of structs" is waiting for. coerceValue now returns PropertyValue rather than FieldValue, the first value type that is not a field; none of its five callers break. In the inspector a struct variable is a block, not a tab. The list tab exists because hundreds of rows fit in no inspector row; a struct is the opposite case - few fields that fit under each other. It is the port editor Pack already has, one level down and with a value column: type, key and default value in one place. A placed object sees the same fields as plain value rows: overriding yes, declaring no. Adding or removing a field touches the declaration, the default, the behavior's value and every instance override in one command, so a stored value can never keep a shape its declaration no longer promises. The row handlers read the bundle at the moment of the change rather than closing over a snapshot - a field writes the whole bundle, so with a snapshot the second edited row revives the first one's old value. defSignature carries the fields, otherwise a new row appears only at the next rebuild. Fixes a fixture fault this uncovered: step 10 pushed its text object into the scene without instanceEdits, which overrideSites walks with Object.entries. AddStructFieldCommand is the first caller to reach it from that state; the step was green alone and failed three checks in the full suite. Moves the dynamic-ports note to done - all three of its parts are built. Co-Authored-By: Claude Opus 5 <noreply@anthropic.com> |