183f356c99d2e1d0b2557af262f2b175e3fcd3c8
57
Commits
| Author | SHA1 | Message | Date | |
|---|---|---|---|---|
  adminandClaude Opus 5.5
|
32cb5b4ba5 |
Size, turn and scale a selected sprite or collider in the scene (#223)
A sprite or collider could only be sized, turned and scaled through
the inspector. The scene view now draws a size gizmo on the selection,
so the common edits happen where the object is.
- Edges and corners set Width and Height. The opposite side stays
where it was, so the position moves by half the change. Sizes land
on whole units, at least 1.
- A circle collider has edge handles only and stays round. A polygon
or frame collider keeps its own corner editing and gets no size
handles.
- One knob on a stem above the top edge turns or scales. The first
5 px of the drag decide which: out from the centre scales, sideways
turns. The choice holds until the release, so one drag never does
both. Turning and scaling share one handle by the user's choice.
- Shift snaps a turn to 15 degrees. The turn adds up the swept angle,
so it goes on past a half circle instead of jumping back.
- The values are overrides of this placement, like "Fit to sprite".
A value equal to the asset's own clears the override. One drag is
one undo step.
- A handle reaches 7 px outwards but only half that into the object.
Otherwise a press near the edge of a small sprite sizes it instead
of moving it.
- The rules live in src/editor/sizeGizmo.ts without Pixi. The handles
are drawn and driven by src/editor/viewport/sizeGizmoEditor.ts. The
test hook __gm.sizeGizmo() reports them in screen pixels.
Found on the way:
- The first e2e run failed the play-mode drag check in 41b. It grabs
the 40 px crate 6 px inside its bottom edge, and the full grip zone
took that as a resize. The half zone inside fixes it.
- A first gizmo check failed because the sprite's right edge lay
outside the scene view (x 940, view ends at 925). The test was
wrong, the sprite now sits further left.
Tests:
- ./check.sh: 156 files, 2283 tests, CHECK EXIT 0 (before 2273).
- 10 unit tests in tests/editor/size-gizmo.test.ts.
- 6 new e2e checks in 29j: handles present, edge resize with the
opposite edge fixed, undo, knob turn, knob scale that ignores a
later sideways pull, circle radius.
- e2e 1-16,29,39-43 on the final state: ALL PASSED, 663 checks.
- Counter-checks: deciding the knob mode on every move fails the
"does not turn it" check. Not moving the centre on an edge drag
fails both edge checks. A full grip zone inside fails the new unit
test. Originals restored.
- Check total 1357 + 6 = 1363, computed. CI measured 1357 at
|
||
|
adminandClaude Opus 5.5
|
cb32b4bc23 |
Draw scene symbols as white panel icons that make room for each other
The scene view drew its symbols from its own SVGs, each in a type colour and some on a plate. They looked heavier than the panel icons and were hard to read on busy ground. Symbols of different objects also sat on top of each other whenever their positions met. - Every symbol is now the panel icon of its kind, one file for both places. The scene-only SVGs in src/viewport/icons are gone. - Symbols are white in a thin dark outline with no plate behind them. haloSvg widens each shape of the file by its own stroke and draws that silhouette dark under the icon, so no second file is needed. - A butt stroke end would leave its end without outline. The halo caps such strokes square, and the rigidbody arrow shaft is now a filled rect so its top edge is outlined exactly. - Symbols are 18 world units across, stay upright and are clickable. A click selects the object, a drag moves it. - symbolLayout places every symbol on its object's position. Symbols that overlap stand on a ring round the middle of their positions, evenly spaced one icon apart. A ring that reaches into another symbol takes it in until nothing overlaps. Ownership plays no part. - Names sit beside their symbol, on the outside of a ring. Selection frames and parent links follow the symbol. - A collider icon no longer shows trigger or invalid state. The outline colour of the shape still does. - A lone collider sits on its sprite's middle again. A press there on an unselected sprite drags the collider, so e2e 02 and 16 now grab the sprite beside its middle. Hook __gm.container.objectRect helps 16 find that spot. Tests: - check.sh: 2245 tests, CHECK EXIT 0 (+8 for layout and halo) - e2e 1-16,31,39-43: 670 PASS, 2 FAIL. Both were sampling too strictly for the thinner, smaller icons. 5c looked for the exact outline colour, which the thin outline only reaches blended at this zoom. 31n started the ring scan one pixel past the smaller ring. Both are fixed, and e2e 5,31 then passed with 48 checks. - 5c checks white with an outline and none of the old colours, 41b checks the ring positions and that a click on a symbol selects its object, 31n checks the now white particle ring. - Counter-checks: without the halo only 5c fails, also with the looser outline match. Without the layout the ring and click checks in 41b fail. Originals restored by cmp. - The e2e check total stays 1351. Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> |
||
|
adminandClaude Opus 5.5
|
2cf72022eb |
Ping an asset from its inspector link instead of selecting it (#221)
A single click on an asset link used to select the asset. That swapped
the inspector over to the asset, so the object being edited was gone
and the second click of a double-click landed on a different row. A
click now pings the asset in the asset panel, like Unity does in its
Project window, and a double-click opens it.
- state.pingAsset(id) emits a new `ping` event. It runs no command and
leaves the selection alone, like openAsset.
- ListView.ping(id) draws an accent overlay on the row. It stays full
for 200 ms and is gone after 1 s, driven by onFrame. destroy cancels
the animation.
- The asset panel expands the group, scrolls to the row and pings it.
- The capture listener and followedLink in the inspector are gone.
The inspector is no longer rebuilt, so pressCount on the label is
enough. followsPress and pressOf are no longer exported from ui/.
- The "Asset" and "Part of" rows of a scene object were a ghost button
that selected the asset. They are now a link label with the same
ping and open behaviour, next to a read-only field with the name.
- The link logic lives in linkLabel() in fieldFactory.ts. createFieldRow
and the asset row share it.
- TextField gets a readOnly option: no focus, no caret, no hover.
- New hook __gm.assetPing(). inspectorLink also reports the field
next to the label (value, readOnly).
Findings:
- Renaming an asset while its object was selected left the old name
in the inspector. This was already the case with the old button.
The refresh now updates the name.
Tests:
- ./check.sh: 151 files, 2228 tests, CHECK EXIT 0 (before 150 / 2226).
New: tests/ui/list-ping.test.ts for pingAlpha and pingAsset.
- e2e 1-16,28 on the final build: ALL PASSED, 575 checks.
28l-ii has 9 checks instead of 5.
- Counter-checks, each failing exactly at its check: ping also selects,
no follow-up frame (alpha stays 0.55), inspector never opens, field
takes focus, name not refreshed, label not a link.
- Check total 1345, calculated. CI last counted 1336 at
|
||
|
adminandClaude Opus 5.5
|
1aae97b335 |
Open a sprite's texture or shader from the menus and inspector (#221)
A sprite's texture and shader were only reachable by hunting for them
in the asset panel. Every place that shows such a reference now leads
straight to it.
- Object menu (hierarchy and scene view): "Open texture" and "Open
shader" sit right below "Open asset" when the sprite has one. The
object's own values count, so an overridden shader opens the
override.
- Asset context menu: the same entries at the top.
- Inspector: every asset field with a value shows its label as a blue,
underlined link. One click selects the asset, a double click opens
it. An override stays gold and gets the underline too.
- The first click rebuilds the inspector, so the second one lands on a
different row. The inspector catches that second click before any
row sees it.
- New pure rule `references.ts`: the asset behind a reference field. A
frame leads to its sheet. Kinds without a tab (palette, font, sound)
get no menu entry.
- `followsPress` in `clicks.ts` keeps the double-click window and
tolerance in one place.
- `activateAsset` in `actions.ts`: opening means the same everywhere
as a double click in the asset panel, so a scene also becomes the
active one. The asset panel uses it too.
Tests:
- ./check.sh: 150 files, 2226 tests, CHECK EXIT 0 (before 148/2214).
- 12 new unit tests: 6 for the reference rule, 4 for the link in
createFieldRow, 2 for followsPress.
- 5 new e2e checks in 28l-ii: both menus, the link's look, click
selects, double click opens.
- e2e 1-16,26,28,35,39,40 on the final build: ALL PASSED, 732 checks.
- Counter-probes: no "Open ..." entries, no underline and a second
click never recognised each fail exactly at their checks.
- Check total 1341 (CI counted 1336 at
|
||
|
adminandClaude Opus 5.5
|
fd6af84474 |
Keep the texture tab smooth with many collision outlines (#220)
With a large sheet the texture tab stalled on every mouse move. A
profile over a pan with 1728 frames showed two causes. Half of the time
went into convexPieces, which split every outline into convex pieces
only to pick its colour. And every pointer move during a pan rebuilt
and re-tessellated the whole overlay geometry.
- TextureCanvas draws on two layers. `sheet` holds every frame except
the selected one and is rebuilt only when the zoom, the selection or
one of those frames changes. `overlay` holds the selected frame, its
handles and the rubber band of a new frame.
- Both layers are drawn without the pan. A pan only moves the
container and places the name labels again.
- SheetCanvas has a new hook `panned()`. By default it calls `redraw()`
as before, so Pixel Art and Vector Art are unchanged.
- The validity of an outline is remembered per outline and comes from
polygonProblem, with the same result. This works because the model
replaces an outline list on every change and never edits it in
place, the same as frameOutline.ts already relies on.
- The name plates stay below the outlines and the texts on top. Checked
on a screenshot: the corner handle next to a label sits on top.
- New debug hook `__gm.texture.drawInfo()` with the rebuild count, the
outline count and the screen positions of outlines and names.
Measured with a throwaway probe, 1728 frames, 120 moves, main thread
time per move, before and after in the same browser:
- Middle-click pan: 76.9 ms -> 4.7 ms (4.4 ms without frames)
- Dragging a frame: 51.7 ms -> 10.1 ms
- Wheel zoom: 52.2 ms -> 30.9 ms
- Selecting another frame: 67.6 ms -> 41.0 ms
Findings:
- Wheel zoom and selection still rebuild `sheet` once on purpose. That
stays a single hitch per notch or click on very large sheets.
Tests:
- ./check.sh: 148 files, 2214 tests, CHECK EXIT 0.
- e2e 1-16,37,39-43 on the final build: ALL PASSED, 641 checks.
- Three new checks in 42c-ii. A corner drag does not rebuild the other
frames. An undo on an unselected frame reaches the picture (1 -> 2
outlines). A pan moves outlines and names by exactly 40/25 px without
a rebuild.
- Counter-checks: a missing outline in the cache key and a pan that
does not move each fail at their check. The selected frame in the
key fails alone with 9 rebuilds during an 8-step drag.
- Check total 1333 -> 1336 (confirmed by CI at
|
||
|
adminandClaude Opus 5.5
|
ceaa44e5b8 |
Add roles and a user management tab for admins (#180, #179)
Until now every account could do the same, and managing accounts meant running make-user.php on the server. Accounts now carry a role, and admins get a tab in the editor to create, rename, re-role, reset and delete accounts. Both issues share the same server files, so they land in one commit. #180 Roles: - Every account is admin or user. A missing or unknown role counts as user, on the server and in the client. - auth/session and auth/login return {user, role}. - Auth::requireAdmin() answers everyone else with 403. - make-user.php takes the role as a third argument. Without it an existing account keeps its role, so a password reset from the CLI never demotes an admin. - Admins see and save other users' projects like their own. Saving keeps the original owner. #179 User management: - The account menu gets "User management" (admins only) and "Plugins" (everyone). Both open the same closable tab, accounts on top and plugins below. The fixed Plugins tab is gone. - Per account: Rename, Role, Password (no old password needed) and Delete with a confirmation. "New user..." creates one. - Each account lists its projects with an Open button. - Delete is refused while the account still owns projects. - Renaming moves the projects along and ends every session of the account. transfer takes the same lock as save. - On their own row an admin can only set the password. The last admin cannot be demoted or deleted. The server enforces both. - The account rules live in AccountRules.php and accountRules.ts as pure functions, so they are testable without a server. Findings: - At 1280 px the Delete button reached past the column edge and was not clickable. The name column is flexible now, and module 49 checks the layout. - The server lets an admin delete other users' projects, but the editor has no button for it yet. Left open in the issue. Tests: - ./check.sh: 148 files, 2214 tests, exit 0 (was 147 / 2204). - New tests/php/accounts.test.php, 51 checks, plain PHP. CI runs it as its own step in the gate job, the host has no PHP. - New e2e module 49 with 18 checks. CI creates the e2e-admin account in serve.sh. Modules 14, 38, 46 and the scaffold follow the new tab. - e2e 1-16,37,38,45,46,49: all passed, 581 checks. - Counter-checks: owner on save, admin view, default role and self delete in PHP fail 7, 5, 5 and 1 checks. Unchecked requireAdmin, a wider column and the caller as owner each fail exactly their e2e check. - Check sum 1314 -> 1333 (+1 in 38, +18 in 49), computed. Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> |
||
|
adminandClaude Opus 5.5
|
ed29b2f3dc |
Split the debug hook into one file per topic (#215)
debugHook.ts had grown to 1097 lines of unrelated test hooks. They now live in seven files under src/editor/debug/, grouped by topic. debugHook.ts only assembles them and is down to 86 lines. - The shape of window.__gm is unchanged for tools/. Measured in the browser before and after: 120 top-level keys and 313 leaves with their arity, byte-identical JSON. - The Text import is explicit in the helpers. Without it the name fell back to the DOM type and instanceof would never have matched. Findings: - The comment for vectorArt sat above pixelArt. It is back in place. - An orphaned duplicate comment on assetRow is gone. Tests: - ./check.sh: 145 files, 2192 tests, CHECK EXIT 0 (unchanged) - e2e 1-16,37,39-43,47,48: ALL PASSED, 734 checks - The shape probe turns red against a deliberately misnested hook. Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> |