Part (a) of the animation rework: model, commands, saving, runtime and nodes.
- AnimationAsset holds a root (sprite, text, container or scene) and rows; a row keys one
property of the root or of an object inside it, keys sit on whole frames.
- The last key decides the length (its frame counts as a frame of its own). The playhead runs
between frames, so numbers and colors blend every tick even at 10 fps; everything else holds.
- Playback gains `once-reset`, which puts back what was there before the start. A row can be
relative, adding to where its target stood.
- Play / Pause / Stop animation act on an object; each instance plays on its own, the later
start wins on a shared property, and a behavior writing the same property still writes last.
- A sprite no longer wears an animation through `texture`. "Create animation from texture"
builds a sprite plus a texture row keyed frame by frame instead.
- The Animation tab shows a placeholder until the timeline editor (part b) lands.
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
CI found the gap the hard way: with every kind of asset in the project
the new scene sits below the panel, and the right click for "Set as
start scene" landed somewhere under the list instead of on the row.
locate() only asked whether a text was visible, and a masked row still
is - it is merely clipped away.
locateAll and overlayTexts now walk the tree together (eachText) and
carry the clip of every ancestor, measured on the widget that owns the
mask: Pixi v8 hands a Graphics set as a mask to the mask effect and
reports empty bounds for it, so asking the mask itself declares every
masked text in the editor missing. Two hooks with two notions of
"visible" was the second half of the same bug.
The panel also scrolls the selected row into view now, the way the
hierarchy has always done - an asset selected elsewhere has to be
findable in the list, test or no test. And step 21 learned that scene
is a property kind.
Load scene sets a flag on the World like Stop and Restart do; the swap
happens after the tick, and the last wish of a tick wins. Exactly one
thing crosses over: the SharedState, so global variables and global
machines keep what they know while everything local is built anew.
Loading the scene that is already running rebuilds it, which is what
"reset the level" means when the score must survive.
A run starts either from the start scene (a new project field, set from
the asset panel and marked with an arrow in the list) or from whatever
scene is open. The toggle next to Play says which question is asked and
remembers the answer in localStorage: it is a way of working, not part
of the game.
Sounds no longer end because a scene ends. A voice belongs to the
behavior that started it and stops right after On destroy, so the scene
swap is no longer a special case at all. For the enemy that plays its
explosion and destroys itself in the same breath there is now a
detached input on Play sound.
The scene selector stays usable while a run plays, because a double
click in the asset panel already did the same thing unguarded. It moves
what the editor looks at, not what the run plays.
Typing "variable" into the node palette landed on `Run behavior`, because the
filter weighed label, type and description alike and then sorted by category.
`searchRank` in `src/ui/search.ts` now ranks a match: exact label or type, then
prefix, then label, then type, and only last a hit that lives in the
description alone. Category and alphabet order within a rank. The searchable
`Menu` uses the same function, so searching means the same thing everywhere.
The `+` menu grew to fifteen entries in declaration order. It is built in two
alphabetical groups now -- the types that go into a scene, then the ones that
stay in the library -- with a separator between them, the split `isPlaceableType`
already draws. `ASSET_TYPES` itself stays untouched: it is also the
serialisation and check order. A search flattens the groups and drops the lines.
Popups were capped at fixed heights (320 menu, 260 palette, 340 pickers) while
the canvas had room to spare. `Popup.roomFor()` measures its own chrome and
takes the window height minus a tenth at each end. Placement clamps
asymmetrically: the bottom margin is enforced, the top is only a budget, so a
menu anchored near the top stays at its button instead of being pushed off it.
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
Sounds follow the road fonts already paved: the file goes to the server
content-addressed under its sha256, the project keeps a named asset that
points at it, and nothing is ever re-encoded. The format is read from the
file's own signature, not from what the browser claims - the same .m4a
arrives as audio/mp4, audio/x-m4a or as nothing at all.
Playing is two nodes. "Play sound" takes the asset and may raise or lower
its volume; every call is its own voice, so two jumps in a row are two
jumps heard. Its loop input is a choice of three - from the asset, on,
off - because a checkbox has to spend one of its two positions on "not
set" and would lose a case: an asset that loops could then never be
played once.
Below the graph core stays browser-free: NodeContext hands out an asset
id, BehaviorSystem resolves it against the project and folds the asset's
own volume and loop into the call, and only viewport/SoundLibrary knows
about Web Audio. A run without a sink plays nothing instead of throwing.
The CI browser is muted, so the ear is no witness: the debug hook counts
started and stopped voices, and step 34 reads that counter.
A font asset holds a file and nothing else, the twin of a texture: the server keeps it
content-addressed under data/fonts/{sha256}.{ext}, with the format read from the file's own
four-byte signature (finfo reports fonts inconsistently across libmagic versions). A text
wears one through its ordinary Font property, so overrides, reset, undo and the Properties
node come for free; no font means the editor's own typeface.
The picker lists everything the server holds and renders each row in the face it offers.
The family name is gm-font-<hash16>, never the name inside the file, so two "Regular" cannot
collide. WorldViewport.syncText is the single place that draws it, which covers scene, game
preview and play at once.
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
One rule for every asset type: a click on an asset row selects it, a
double-click (or Enter, or creating it via +) opens its tab. Selection
alone still switches tabs only for nodes, frames and template objects.
- state.openAsset(id) = select + 'open' event; the editor maps the asset
type to its tab via TAB_OF_ASSET. The two special clauses for state
machine and shader assets in the selection handler are gone.
- Creating via + and importing a texture from the picker open the tab;
paste/drop of an image only selects.
- 3 unit tests (event order, re-open of a selected asset, selection never
fires open), 14 e2e checks in step 4.
Co-Authored-By: Claude Fable 5.1 <noreply@anthropic.com>
A shader is an asset carrying a node graph (Texture color, Output, Property,
Color, Add/Subtract/Multiply/Divide, Mix, Luminance) that compiles to the GLSL
fragment of a Pixi filter. The Shader tab reuses the Behavior canvas; a sprite
wears a shader through its Shader picker, and the rows below it are the
graph's Property nodes. Property schema, resolution and deviation take the
project because a sprite's rows now live in another asset. The built-in
registry of the prototype is gone; "Adjust colors" ships as a graph in the
fixture and the three example games.
Co-Authored-By: Claude Fable 5.1 <noreply@anthropic.com>
An animation asset is a list of pictures (whole textures or frames) with
frames per second and Loop/Once/Ping-pong playback. A sprite wears it
through its texture property, so the picker, instance overrides and the
Properties node work unchanged; there is no dedicated play node.
A different animation starts from its first frame, the same one set again
runs on, so a graph may choose Run or Idle every frame. The clock lives on
the entity, not in props, which the world writes back as overrides. The
AnimationSystem ticks before behaviors, and On animation finished fires
once when a Once animation reaches its end.
The Animation tab plays a preview above a frame strip: reorder by dragging,
Delete, duplicate, + Frames, pause/resume, and wheel zoom about the pointer
with pan and Fit. Scene and Container tabs show the first frame; edit mode
has no clock. Right-clicking a texture creates an animation from its frames.
Button now measures its label with the bold font it draws in, which cut
the Animation tab and red dialog buttons short.
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
The sprite takes the whole image at its pixel size and the texture's name,
numbered like any other clash. CreateAssetCommand now accepts starting
properties; they go through the schema in execute, so an unknown key or a
bad value is refused before the project is touched, and one undo removes
the asset.
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
"+ → Texture" opened the machine's file dialog, so a picture that was uploaded once
but lost its asset – an undone import, a deleted asset – was unreachable from the
editor while still sitting on the server. Nothing collects those files, by design.
It now opens a grid of every picture the server holds, with thumbnails: pick one and
"Use image" makes a texture asset on that file, "Upload…" is the way in for bytes the
server does not have yet and lands in the same import as a drop. A tile captioned with
an asset name is one this project already wears – picking it selects that asset instead
of making a second one, since two assets on one file would fight over `filter`.
- `GET ?r=textures` now reports `width`/`height`; a texture asset holds the pixel size,
and reading it off the GPU texture would tie the asset's correctness to load timing.
- `TextureLibrary.load(file)` loads without touching `scaleMode` – a thumbnail must not
restage the filter of a picture the scene is drawing with.
- The grid geometry lives in `texture/imageGrid.ts` as pure functions; inside the widget
no test could reach it.
- The part after an upload is now one function shared by the drop import and the picker,
so "one file = one asset" is stated in a single place.
12 new E2E checks; the strongest one undoes an import, leaving the file on the server
with no asset naming it, and picks exactly that file back out of the dialog.
The inspector already marked an asset value that differs from its schema
default, but the Assets panel gave no hint, so a changed asset looked
like an untouched one until you opened it.
The rule sits next to the existing objectDeviates as a pure function:
assetDeviates asks whether any marked property differs, markedAssetSchema
says which rows the inspector marks at all. buildAssetSection now builds
its rows from that same list, replacing the behavior/rest split it used
to carry, so the list cannot claim a deviation the inspector then fails
to show.
A behavior's variables are deliberately not in it. Their default is
declared on the variable itself, which means the asset value *is* that
default; counting them would paint the fixture's Mover gold while the
inspector beside it marks nothing.
An instance edit was dropped as soon as its value matched the template
object. With nested containers the template is not what the value falls
back to: the outer container holds an edit for the object below it, and
that one wins. If the inner template happened to carry the same value the
user typed, the edit was thrown away and the value jumped to whatever the
container in between says.
Reported against the Jump-and-Run project: a coin narrowed to 8 inside
"level", then set back to the sprite's own 24 in the scene, snapped back
to 8. Reproduced through the inspector before touching anything.
InstanceTarget now offers `base`: the template with the edits of every
container in between woven in. Everything that judges deviation uses it -
setOverride/setName/setPosition, both Revert commands, and the gold marks
in the inspector. Writing still goes into the real template, which is
where "apply to container" belongs.
`base` is built on every read. Apply writes into the template and then
asks whether the edit still deviates, so a base captured beforehand would
answer for the template as it was - the e2e suite caught exactly that.
Also in here, because it corrects the commit before it: placing an asset
by double-clicking its row is gone, as asked for in asset-doppelklick.md.
Dragging is the only way to place now. That took AssetPanel.place, the
PlacementTarget interface, Editor.placementTarget and the two worldCenter()
methods that existed only to feed it. A double-click on a scene asset still
makes it the active scene.
The context menu entry is gone; dragging replaces it entirely. The drop
target is the view under the pointer, not the active tab, so the same
gesture works for scenes and for container templates.
While dragging, an outline shows the footprint the object will have plus
a crosshair on its origin, turning red when the drop would be refused.
Preview and command share one function (placementRejection), so the
outline cannot promise something the drop then rejects.
A left-press used to select the list row immediately. Since the container
tab follows the selection, it switched to the very container being dragged
and every drop would have nested it inside itself. The list now selects on
release without a drag: picking something up is not the same as choosing it.
The Container tab reuses SceneViewport against any object holder, so a
container template is edited exactly like a scene. Right-click no longer
changes the selection, which previously made nesting impossible: opening
the menu on a container loaded it, and "Place in container" then targeted
itself.
Template edits (move, rename, override) now reach already-placed instances
per slot, through a shared templateSync used by both the apply path and the
plain object commands. Copies the user has touched keep their own value.
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
Remove comments that only restate the code, keeping the section banners
and the notes that carry a reason, a measured fact or an external
contract.
ButtonOptions.width claimed to be a fixed width but only set minWidth,
so the Graph and Texture pickers grew with the name they showed. It is
now what it promises, with a separate minWidth for the buttons that have
two forms. Narrow buttons shrink their padding, otherwise a 24px icon
button had 8px left for its glyph and truncate dropped it entirely.
__gm.labelsDropped() guards that class: the overflow guard only saw text
that was too wide, never a label truncated to nothing.
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
Images are uploaded to a content-addressed blob endpoint and stored as
data/textures/<sha256>.<ext>; the project only keeps the file name. The
sprite points at a texture asset through an ordinary property of the new
kind `asset`, so instance overrides, "Apply to container", "Reset to
asset", undo and `Set property` work without any extra code. The new kind
also replaces the ad-hoc asset picker the graph nodes faked as an enum.
Import goes through + -> Texture, drag & drop onto the canvas or Ctrl+V.
Images wider than 2048px are downscaled client-side and re-encoded to
WebP if needed, because nginx caps uploads at 1MB; an image that already
fits is uploaded byte for byte so pixel art is never resampled.
The sprite colour default changes from red to white, since colour tints
the texture multiplicatively and a tint of white shows an image as it is.
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
Tooling:
- Prettier as the single formatting authority (110 columns, single quotes,
measured against the existing style); Markdown excluded because table-cell
padding turns the README glossary into 1000-character lines.
- Type-aware ESLint ending in eslint-config-prettier, so a rule always means
"this is a bug", never "this looks different".
- .editorconfig and an `npm run check` that runs typecheck, lint, format and
tests in one go.
Findings fixed on the first run: three more duplicate imports, four
String(unknown) calls (parameter types narrowed instead of casts), two dead
initialisers, two redundant casts, a console.log for a real error. Two
warnings were false here and are disabled with a reason in place.
Tests 132 -> 269:
- node-catalog.test.ts covers every node with a run(), with a guard that fails
when a new node has no row.
- behavior-events.test.ts covers the ten event nodes through a running World,
checking timing rather than existence.
- Input's state machine (press/release/releaseAll) is reachable without DOM
events now; the DOM handlers are thin adapters.
Compare fell back to == without a configured operator although the schema
default is <; aligned.
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
Engine additions that the example game needed:
- `enabled` as a shared property of every placeable asset (default on, an
override on the scene object). A switched-off object is not drawn, does not
collide and its behavior does not run - and neither does anything parented
below it. Disabled objects are now hidden in the scene view as well, so the
editor shows what the game shows; they stay in the hierarchy panel, which is
where they are selected and switched back on.
- Asset type `text` (text, fontSize, color, align), rendered in scene and game.
- Pointer input in the game view: `On click`, `Mouse position`, `Mouse button`,
`Is hovered`, hit-tested against colliders, else sprite/text footprints.
- New nodes: Set/Is enabled, Set text, Is asset, Name of, Equals, To text,
Join text, Floor/Ceil/Round, Modulo, Random, Time, Restart game.
Tooling: shared CDP harness (tools/harness.mjs), central project registry with
a guard that keeps destructive scripts off the playground (tools/projects.mjs),
plus smoke suites for the demo scene and the jump-and-run game.
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
- Asset type 'collider' (box/circle) placed as child of a body object
- 'Add collider' shortcut (hierarchy context menu + inspector)
- CollisionSystem with enter/stay/exit pairs, sibling colliders excluded
- Nodes: On collision enter/stay/exit, Is touching
- Green outline in edit mode, hidden in play
Co-Authored-By: Claude Fable 5.1 <noreply@anthropic.com>
Canvas-only 2D game editor/runtime built on PixiJS v8 + Vite + TypeScript.
- core: asset model (Scene/Camera/Sprite), scene objects with sparse
overrides, property schema + resolve, command stack (undo/redo),
serialization and project store interface (16 unit tests)
- ui: custom in-canvas widget toolkit (panels, fields, color picker,
list/scroll, popup) with a hidden <input> keyboard bridge
- editor: asset/hierarchy panels, schema-driven inspector, toolbar
- viewport: box rendering, camera frame, selection gizmo, drag/zoom/pan
- runtime: world/entity instantiation for play mode, input, camera follow
- api: PHP JSON project store with revision counter (409 on conflict)
- tools: CDP-based e2e smoke test
Co-Authored-By: Claude Fable 5.1 <noreply@anthropic.com>
adminandClaude Opus 5