The tile tab zoomed freely, so the pixels of a tile could end up
unevenly wide at odd factors. Scene view, container tab and animation
preview already snap to FREE_ZOOM_STEPS. The tile tab now does the
same, so every pixel editor zooms alike.
- The wheel steps through FREE_ZOOM_STEPS, counted in device pixels.
The board position is rounded to whole device pixels.
- New wheelSteps() in src/viewport/view.ts turns wheel events into
steps: one notch is one step, a trackpad gathers 50 px per step.
FreeViewport uses it too, so the rule exists only once.
- Fit takes the largest step at which the whole board fits. Refitting
on a new tab or board size stays as before.
- panAndZoom takes an optional zoom rule instead of limits. Graph and
node board keep zooming freely.
- A saved view from before the steps snaps to the nearest step.
- The cap parameter of frameBoxes from 4027afc has no user anymore.
It is removed together with its unit test.
Fit rounds down, and below 100 percent the steps are far apart. In the
small e2e window the 48 px board lands at 25 instead of 41 percent,
the 16 px board at 100 instead of 124 percent.
Tests:
- check.sh: 161 files, 2370 tests, exit 0 (-1 cap test,
+1 wheelSteps test)
- e2e 1-5 and 39: all passed, 169 checks. Three checks in 39 now
expect steps: Fit on a step with the next one too large, one notch
goes 0.25 to 0.5, 16 px tiles refit to at least 100 percent.
- Counter check: a free Fit factor fails exactly those three checks
(zoom 0.413 and 1.2396).
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Fit in the tile tab left the board small in the middle of the tab.
It used frameBoxes, which never zooms past 1 so that two graph nodes
do not blow up to fill the screen. The tile board is measured in image
pixels, though, and with 16 px tiles it is only about 345 x 186 px.
- frameBoxes takes a new cap parameter, default 1. The graph and the
node board keep their behaviour.
- The tile tab passes its zoom limit of 6, so Fit fills the tab up
to 600 percent.
- TileCanvas remembers whether the view is still the one Fit set.
While it is, a change in the size of the tab or of the board fits
again. After a pan or zoom by hand the view stays until Fit.
Found on the way: switching the image to another tile size (48 to
16 px) kept the old zoom, and the board shrank to a third. The refit
above covers that too.
Tests:
- ./check.sh: 161 files, 2370 tests, CHECK EXIT 0 (was 2369).
- New unit test in graph-framing: with a raised cap Fit fills the
view up to the limit. The graph test for "not past 100 %" holds.
- e2e 39: ALL PASSED, 31 checks (was 29). Fit fills the tab at 48 px
(zoom 0.41) and fits again after the switch to 16 px (zoom 1.24).
- Counter probes: a cap of 1 and no refit on a new board size each
fail exactly the 16 px check (zoom 1 and zoom 0.41).
- e2e sum in the README is 1384, computed, not yet seen in CI.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
The mask labels under the tile preview sat inside the zoomed board.
Pixi rendered them at 10 px and stretched them with the zoom, and
each label was shrunk to the width of its tile on its own. They came
out blurry and in different sizes. The example map also only showed
a ring, so narrow paths and crossings were never previewed.
- The labels live in their own layer in screen space and are
re-rendered at the fitting font size on every zoom.
- All labels share one size, at most the 10 px of the theme. Below
6 px they are hidden.
- A label has two lines: the sides on top, the corners dimmed below.
- The example map keeps the ring cell for cell and adds a network of
1 tile wide paths below it. It has straight 1xN and Nx1 pieces,
curves, two T junctions, a crossing and a dead end.
- The map stands next to the grid in a wide panel and below it in a
tall one. Fit picks the layout with the larger tiles, and only Fit
changes it, so zooming does not make the board jump.
- The new hook __gm.tile.captions() reports size, scale and lines.
Found on the way: the taller map made Fit zoom out further, and 3
pixel checks on the 16 px terrain tiles failed. The side by side
layout fixed that.
Tests:
- ./check.sh: 160 files, 2364 tests, CHECK EXIT 0 (was 2363).
- e2e 39: ALL PASSED, 29 checks (was 28).
- New unit test: the example map has straights, a curve, a crossing
with four notched corners, a T junction and a dead end.
- Counter check: with the labels back in the zoomed board the new
caption check fails (scales [0.648, 1]).
- The e2e sum in the README is now 1381. It is calculated only.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
The theme asks for Source Sans 3 at weight 500, but fonts.ts only
loaded 400, 600 and 700. The browser synthesised the 500 text. The
issue comment also asked for the symbols the font lacks to become SVG
icons. A scan of src/ against the font's cmap found 20 such characters
in 30 places.
- fonts.ts loads source-sans-3-latin-500-normal.woff2 as well.
- Menus draw their ticks and the "current" dot as icons. The dot is a
new MenuItem.current field and no longer part of the label text.
- Inspector action buttons (reset, apply, fit width/height) are
icons. The menu arrow behind them is the drawn Dropdown chevron.
- Kind marks come from a table in markIcons.ts. Picture kinds use an
icon, # and Aa stay text because the font has them.
- Scene marks in the asset panel, sound play/stop and the transition
arrows are icons too.
- Apply is an icon although the font has the arrow. It sits next to
the reset icon and would look different as a glyph.
- A new Icon widget draws on redraw like Button, so Node tests need no
DOMParser.
- Tests find icons through the SVG id. The new hook
__gm.locateIcons(id) and the harness helpers findIcon/clickIcon
replace locate() on the old characters.
Findings:
- Weight 700 is loaded but the theme never uses it. Left as is.
- The old scene-mark check in module 35 accepted any play glyph on
screen. It now checks the mark on the start scene's row.
- Module 44 needs the textures from module 37 and fails without it.
Tests:
- ./check.sh: 145 files, 2187 tests, exit 0 (before 144 / 2143).
- New tests/ui/fonts.test.ts: every theme weight is loaded, and every
character in src/ exists in every shipped face. The cmap reader
matches fontTools (231 characters).
- Icon tests cover the 19 new files. Each kind mark is either an
icon or text, never both.
- e2e 1-16,22,30,34,35,43,44: 586 green, 0 FAIL, then 44 stopped
for lack of module 37. e2e 1-16,37,44,47,48: 618 green.
e2e 1-14 on the final build: 454 green.
- Two new e2e checks: loaded weights in 14, a reset icon pixel in 04.
- Counter-probes all fail as expected: 500 removed, a play glyph put
back, the struct icon removed (one unit test each). In the browser,
500 removed and reset icon hidden fail exactly the two new checks.
- Editor-suite check sum 1312 (1310 measured by CI at 056a622, +2).
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
After signing out and back in, a texture fill stayed in its base
colour until something else redrew the vector tab. The texture
library is a singleton that outlives the editor. Four widgets
subscribed to it and never unsubscribed. After a new sign-in the
first loaded texture called a destroyed canvas, which threw and
stopped the loop before the vector tab heard about the image.
- TextureCanvas, TileCanvas, ShaderPreview and WorldViewport now
unsubscribe in destroy(). This is the pattern FontPreview and
VectorArtCanvas already use. WorldViewport leaves both the
texture and the font library.
- FileLibrary.notifyChange catches errors per listener. A broken
listener no longer starves the others. The error is still
logged as "[textures] a listener failed".
- e2e 47i no longer forces a redraw. It waits up to 3 s for the
tab to show the texture on its own.
Findings:
- The trigger was e2e module 45 (sign out, sign in), not the
texture fill. My note in #196 that the browser showed no
exception was wrong. The counter-check shows it clearly.
Tests:
- ./check.sh: 137 files, 2051 tests, exit 0 (before 136 / 2049)
- 2 new unit tests in tests/viewport/file-library.test.ts
- GM_STEPS=45,47 after a fresh seed: ALL PASSED, 71 checks
- Counter-check with the old source and the new check: 1 FAIL
(shape stays #0000ff) plus the TypeError. Old FileLibrary.ts
fails the first unit test.
- No full e2e run locally. The check count is unchanged.
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
adminandClaude Opus 5.5