389d9555fae32f2a725ef229716bb73d4356fc8c
7
Commits
| Author | SHA1 | Message | Date | |
|---|---|---|---|---|
  adminandClaude Opus 5.5
|
0f85476b93 |
Add points by double-click and delete the picked one (#288)
Four editors edit points, and all of them put a point down on a single press on the line and took one away on a double-click. A stray click added a point, and there was no way to see which point a key would hit. All four now work the same way: the Curve tab, the Vector art tab, a polygon collider in the scene view and a frame's collision outline in the Texture tab. - A double-click on a line, edge or segment puts a point there, in the Curve tab on free space too. The point is picked and stays in place. It can be dragged with the next press, as answered in the issue. - A click on a point picks it, and it is drawn filled. A double-click on a point takes nothing away any more. - Delete or Backspace takes the picked point away. Without a picked point the key removes the shape, the object or the outline as before. - A right-click on a point picks it and opens a menu with Delete point. In the Curve and Vector art tab the four point types stand below it. Alt-click stays. - A polygon keeps three corners and a curve keeps its ends. The entry is greyed out then. - The pick ends with a click beside the points, with another object, shape or frame, and after the point is gone. - editor/pointGestures.ts holds the rule as a pure function, and editor/pointMenu.ts builds the menu for all four. Decided here: - A single click on a line no longer adds anything. In Vector art it drags the shape, on a polygon it drops the pick, and in the Texture tab it makes that outline the active one and drops the pick. - In the Texture tab a click inside the frame still appends a corner, and that corner is picked. Delete takes the last corner first. To remove the whole outline, click one of its edges before. - The point the Pen put down last is picked, so Delete takes it and not the shape. - Delete hits the picked point also when the tab has lost the keyboard focus, after a click in the shape list or after the menu. - A vector shape that loses its last point is removed whole. Before, an empty shape stayed in the list. Findings: - Fixed: the new hint line in the Texture tab was cut off at the edge. The shorter text was not looked at in a picture again. - Not fixed: in the scene view the collider's name label covers a corner that sits near the centre. That was so before. Tests: - Gate: 200 files, 2967 tests (2944 + 23), exit 0 - e2e, full run: 1629 checks passed (1625 + 4), exit 0 - Smokes: 24 / 19 / 21, exit 0 - After the full run an unused parameter and a comment were tidied. For that final state the gate and e2e 42,47,53 (105 checks) ran again, the full run did not. - 23 unit tests in tests/editor/point-gestures.test.ts, for the rule and for each of the four editors - Four e2e checks with a real mouse, two in module 42 and one each in 47 and 53. The existing checks for adding and removing a point use the new gestures. - 20 unit counter-probes all fail tests, run on stein2 - Two browser counter-probes fail, the build went through both times. Without the Delete wiring the key removes the collider. Without the right-click hook the menu is missing, and that run stops in module 42, so 47 and 53 were not reached with it. - Three screenshots looked at, the picked point is filled. None of the Vector art tab. Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> |
||
|
adminandClaude Opus 5.5
|
bc688f3efc |
Refactoring round 7: split BehaviorSystem, fewer copies (#85)
Recurring cleanup round over the code since round 6 (
|
||
|
adminandClaude Opus 5
|
3ff7e91dbf |
Vector art points have four types and the pen draws whole curves (#195)
The pen only pulled out the outgoing handle of a new point, because the opposite handle was mirrored only if it already existed. The first segment of every dragged point was therefore half a curve. Beyond that bug, a point had no way to say how its handles relate. - A vector point has an optional mode: straight, corner, smooth or symmetric. Missing means corner. The mode is not part of the fingerprint, because it changes no pixel, only the next drag. - Dragging a handle follows the mode. Corner leaves the other handle alone, smooth turns it along and keeps its length, symmetric mirrors it exactly. - The pen pulls out both handles mirrored and marks the point symmetric. A plain click still sets a point without handles. - The tab header has a "Point: ..." menu for the last clicked or set point. That point is drawn filled. Changing its type is one undo step. Text instead of four icons, because the UI kit has no tooltips. - Switching a point without handles to a curved type first grows handles along its neighbours. Smooth and symmetric line the handles up and keep the rough direction of the curve. - A point inserted on a curve is smooth. Symmetric neighbours become smooth, because the split shortens one of their handles. - Alt-click still toggles between straight and symmetric. Found on the way: the old Alt rounding took the point at the other end of an open line as a neighbour, so its handles came out skewed. Fixed and held by a unit test. Existing points with handles now count as corner. Before, every drag mirrored. No pixel changes, only the next drag behaves differently. Tests: - ./check.sh: 129 files, 1917 tests, exit 0 (before 1903) - GM_STEPS=47, freshly seeded: ALL PASSED, 39 checks (before 32) - Check sum 1195 in README and wiki is computed (1188 + 7), CI measures it - Counter-checks: pen without 'symmetric' fails 3 checks, no smooth branch fails 1 unit test and 1 e2e check Co-Authored-By: Claude Opus 5 <noreply@anthropic.com> |
||
|
admin
|
3d7ad65f34 |
Vector art has a tab to draw in, which is stage 3 of #129
Stages 1 and 2 gave the asset a model and a picture, but the only way to put a shape into it was a test calling mutate. The tab closes that gap: what you draw there is what the sprite in the scene carries, with no extra step, because the fingerprint changes and the picture registry of #185 redraws. - The tab has a header with Select, Pen, Grid and Fit, a chequerboard behind the canvas and the canvas itself as a frame. It paints with the same commands as the rasterizer, paintDrawing being exported from viewport/vectorArtPicture.ts for it, so the tab cannot drift away from the picture. - Pen sets points on a click and pulls the handles out on a drag, both of them mirrored; a click on the first point closes the ring and Esc ends an open line. - Select drags a point, a handle or a whole shape, a click on an edge puts a point there, a double click takes one away, and Alt turns a corner round and back. Delete removes the selected shape. - The rules grew inside polygonEdit.ts instead of a second module, as the plan says, so a collider polygon and a frame outline get the same behaviour where it applies. - A point on a curved edge splits the curve by de Casteljau instead of cutting it: both halves together draw exactly what was there before. - A curved edge is walked instead of measured over its chord, or a click on the bow of a curve would grab nothing; the same walk carries the test for the inside of a ring. - One gesture is one undo step. The preview writes the model directly and the old state is put back on release before the command runs, which is the pattern the frame outlines of #141 already use. - state.ts gained a selection kind "shape". The inspector shows the rows of the asset for it, the shape list with colour, opacity and stroke being stage 4. One counter-check was no counter-check: disabling the pen's closing tolerance by multiplying it with 0 left the run green, and rightly so, because the closing click lands on exactly the screen coordinate point 0 came from, so the distance is 0 and <= 0 is true. Only an unsatisfiable condition really switched it off, and then 2 checks fail. A second trap on the way: a false && in front of the guard breaks the TS narrowing, npm run build bails out, and two runs went against the old bundle. Tests: check.sh 127 files, 1878 tests, EXIT 0 (was 126 / 1860). Full e2e suite ALL PASSED - 1172 checks, module 47 alone 17 (was 10). 18 new unit tests in tests/editor/ring-edit.test.ts and 7 new e2e checks in blocks 47c and 47d. Two counter-checks hold: no de Casteljau fails 1 unit test, measuring a curve over its chord fails another. Originals checked back with cmp and rebuilt. |
||
|
adminandClaude Opus 5
|
ae3aa7d3bd |
Refactoring round 5 covers the code since round 4 without changing behaviour: four identical copies of dot() and three of "nearest point on a segment" stood in the collision math, in the hit area of the collider outlines and in the polygon handles, so they moved into the new module src/core/util/vec.ts; the warning line, the busy state, info() and the caret reset were written out line by line in both the sign-in screen and the password dialog and are now FormStatus; the closing row "Cancel plus a confirming button, optionally one on the left" was built by hand in FormDialog, FilePicker, OpenProjectDialog and PasswordDialog and is now dialogButtons(); the header bar was drawn by the toolbar, the TabHeader and the Breadcrumb each on its own and is now drawHeaderBar(); AddColliderCommand and AddRigidbodyCommand share a base, each subclass only builds its own asset; Editor.ts derives the panes from assetEditors instead of repeating eight entries and clamps its splitters with clamp(); jscpd over src falls from 0.19 % to 0.14 %; dead code is gone - listScenes() has been orphaned since the Scene picker fell away (#183), DEFAULT_FILTER (#152) was never used, the two test hooks projectPickerRowAt/rowPosition and particleCompiles are read by no tool, and four functions lost an export they did not need; seven comments that told history ("used to", "no longer", "since #...") describe the state of things now, and that this changed nothing was proved by a rebuild - the bundle is md5 identical, b4ad0dfe... before and after; the README said Logout sits at the far right of the toolbar, which has been the Account menu since #182, and wiki/Architecture.md was missing src/core/util/ altogether; 4 new unit tests cover vec.ts, and switching the clamp on the segment off makes exactly one of them fail while none of the 76 neighbouring tests notice, so that clamping was covered nowhere before (#85)
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com> |
||
|
adminandClaude Opus 5
|
947a6b1977 |
Collision outlines for autotiles: a frame holds several outlines (click adds a corner to the active one, Ctrl/Cmd-click starts a new one, clicking another outline makes it active, Delete removes the active outline and never the frame in collision mode), an autotile's outlines are drawn over the whole block, cut at the quarters and each cell takes the pieces of exactly the quarters its image is made of, so edges, outer corners and notches follow automatically; a tile of the block with nothing drawn blocks fully, cells of only full quarters merge back into rectangles, collision scale does not apply to an outlined autotile, and the previous format with one flat outline still loads (#141)
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com> |
||
|
adminandClaude Opus 5
|
32057a96fc |
Physics stage 2: colliders gain the shapes capsule and polygon, a polygon keeps its corners in the property points, turns, scales and mirrors with its object and is edited in the scene view (drag a corner, click an edge to insert one, double-click to delete, at least three stay, each step one undo step), a concave polygon is split into convex parts, a self-intersecting one is drawn red and collides with nothing, Rapier gets a capsule and one convex collider per part on the same body, and Move and the editor run use our own f64 geometry for the new shapes, where on a tie between two normals the one that blocks the move least wins, so a box no longer stops at the foot of a slope (#151); first version of a collision outline per texture frame, edited in the texture tab with the new Collision toggle, which a plain tile blocks with instead of its rectangle (#141, to be reworked)
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com> |