Next move held four clusters of Set variable in a row, fourteen single nodes
in all; clear-lines read three variables one after the other. They are now
one plural node each, which takes Next move 40 -> 30 nodes and clear-lines
25 -> 23. Every remaining single node was checked and really is single: ok/no
are the same variable in opposite branches, take/keep the same one across a
write, and the three key setters hang on three different events.
Two contracts carry those merges, both pinned as tests. Set variables writes
per port with writeTyped exactly as the singular node does, so a Pack{rot}
still merges instead of overwriting - without it, turning would have erased
the other three fields. And the interpreter collects every input before the
node runs, so no input may come from a variable the same node writes; a data
node is evaluated once per pulse and keeps its answer. That second rule is
invisible in the game, because OnUpdate re-reads each frame and heals it, so
it lives in a unit test rather than in the smoke.
/opt/node22 and /opt/npm are gone from the tree. build.sh ran into the empty
path once they were moved away; the other seven mentions were documentation.
e2e.sh and check.sh replace the bare npm calls. A long run does not survive
the end of its shell - four full e2e runs died mid-suite with oom_kill 0 -
so e2e.sh start hands the run to a transient game-maker-e2e.service, which
does. e2e.sh status reports the running job or the last result, and calls a
log without a closing line ABORTED rather than reporting the passes it got
to. Both scripts end on an explicit exit line, because set -o pipefail inside
a script does not protect the caller: measured, ./check.sh | tail still
reports 0. Logs carry a timestamp and land in logs/, which is ignored.
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
GM_STEPS=20, 1-12 or 6,20 takes a subset of the suite, which is seconds
instead of two minutes while one step is being written. Steps live off
what the earlier ones leave behind, so a subset that skips a prerequisite
fails on purpose. The filter had been written as a throwaway script three
times; it belongs in the runner.
The README stops calling a remote browser the way this suite is meant to
be run: with the GPU in use a local run costs ~124 s and about 0.8 of the
four cores here, so GM_REMOTE is a convenience, not a requirement.
- Inspector rows compute their reset/apply entries through providers, so an
entry that would not change anything is dropped; a single remaining entry
renders as a direct button instead of a menu, none removes it entirely.
- Bold and buttons now follow the same rule (deviatesFromAsset /
deviatesFromTemplate in core/properties/resolve.ts).
- Hierarchy panel is a collapsible tree: chevrons, arrow keys, double click,
expand/collapse all. Everything starts collapsed; selecting an object
expands its ancestors and scrolls it into view.
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
Engine additions that the example game needed:
- `enabled` as a shared property of every placeable asset (default on, an
override on the scene object). A switched-off object is not drawn, does not
collide and its behavior does not run - and neither does anything parented
below it. Disabled objects are now hidden in the scene view as well, so the
editor shows what the game shows; they stay in the hierarchy panel, which is
where they are selected and switched back on.
- Asset type `text` (text, fontSize, color, align), rendered in scene and game.
- Pointer input in the game view: `On click`, `Mouse position`, `Mouse button`,
`Is hovered`, hit-tested against colliders, else sprite/text footprints.
- New nodes: Set/Is enabled, Set text, Is asset, Name of, Equals, To text,
Join text, Floor/Ceil/Round, Modulo, Random, Time, Restart game.
Tooling: shared CDP harness (tools/harness.mjs), central project registry with
a guard that keeps destructive scripts off the playground (tools/projects.mjs),
plus smoke suites for the demo scene and the jump-and-run game.
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
Move with "Collide with solids" now steps in sub-steps of at most half the
thinnest collider, so a fast step can no longer jump across a collider (the
crates are only 60 high, which is why it showed up mostly on the y axis). A
pre-existing overlap is still never resolved, but it can no longer be
deepened either, so a small overlap cannot open a wall permanently.
seed-demo.mjs now writes the saved demo scene: a "Player" container (green
sprite with collider and the Mover behavior) against two "Enemy" container
instances, camera at zoom 0.5, Spawner dropping another enemy on Space.
The e2e checks assert against the old two-crate layout and locate widgets by
text, which the demo can no longer provide (three identically named sprite
instances, both crates nested in containers). Its fixture therefore moves to
tools/seed-e2e.mjs so the shipped demo can evolve without rewriting 100+
checks: seed-e2e -> e2e -> seed-demo.
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
- Collider property isTrigger (no blocking, still reports enter/stay/exit)
- Node 'Move and slide' with blocked x/y outputs, axis-wise resolution
- axisSeparation/axisCorrection geometry for box/box, circle/circle, box/circle
- Amber outline for trigger colliders in the viewport
- Demo mover uses Move and slide; E2E step 15b, 7 new unit tests
Co-Authored-By: Claude Fable 5.1 <noreply@anthropic.com>
- Asset type 'collider' (box/circle) placed as child of a body object
- 'Add collider' shortcut (hierarchy context menu + inspector)
- CollisionSystem with enter/stay/exit pairs, sibling colliders excluded
- Nodes: On collision enter/stay/exit, Is touching
- Green outline in edit mode, hidden in play
Co-Authored-By: Claude Fable 5.1 <noreply@anthropic.com>
- TextField: new onSubmit callback (Enter only, independent of value change)
- NodePalette: use onSubmit instead of onChange, add per-open picked guard
- e2e: new check 13a (type + click row -> exactly one node), wait for
Chromium exit in finally with SIGKILL escalation after 5s
Co-Authored-By: Claude Fable 5.1 <noreply@anthropic.com>
- Position is now { x, y, z }; higher z draws on top, ties keep hierarchy order
- Viewport sorts the objects layer deterministically (syncDrawOrder)
- Inspector shows a Z field; asset properties that differ from the schema
default are marked bold with a reset button (ResetAssetPropertyCommand)
- isModified() helper, unit tests, E2E checks and seed updated
Co-Authored-By: Claude Fable 5.1 <noreply@anthropic.com>
- Camera assets get width/height properties; play mode renders only the
camera frame (letterboxed, masked, culled) and nothing without a camera
- Remove demo arrow-key/camera-follow systems from play mode
- Clip world and gizmos to the viewport (selection frame no longer leaks
over the left panel)
- Blur focused widget on pointerdown outside it so inspector edits commit
before selection changes
- Separate objects/overlay layers so camera symbols always render on top
- Add tools/seed-demo.mjs for reproducible E2E runs
Co-Authored-By: Claude Fable 5.1 <noreply@anthropic.com>
Canvas-only 2D game editor/runtime built on PixiJS v8 + Vite + TypeScript.
- core: asset model (Scene/Camera/Sprite), scene objects with sparse
overrides, property schema + resolve, command stack (undo/redo),
serialization and project store interface (16 unit tests)
- ui: custom in-canvas widget toolkit (panels, fields, color picker,
list/scroll, popup) with a hidden <input> keyboard bridge
- editor: asset/hierarchy panels, schema-driven inspector, toolbar
- viewport: box rendering, camera frame, selection gizmo, drag/zoom/pan
- runtime: world/entity instantiation for play mode, input, camera follow
- api: PHP JSON project store with revision counter (409 on conflict)
- tools: CDP-based e2e smoke test
Co-Authored-By: Claude Fable 5.1 <noreply@anthropic.com>
