A state keeps its `in`/`out` exec pins in the model and the editor never draws
them. That is the whole trick: connecting, undo, deleting a state and saving all
keep working untouched, because `normalizeGraph` filters nodes and never edges,
and no edge ever checks its port key against a NodeDef. Only two places change --
`NodeView.redraw` stops drawing the row, and `portAt` refuses to hand one out, so
an invisible pin cannot be grabbed either.
Transitions are drawn by right-clicking a state, `Make transition`, then clicking
the target. The armed mode takes the same shape as a live drag, so the existing
preview draws it with no second code path, and it dies with Escape, a click on
empty canvas or a switch to another asset.
Removing the pins removed the only handle a transition had: edges have no
hit-test anywhere, and the pin right-click was the sole route to Disconnect.
The inspector's TRANSITIONS OUT / TRANSITIONS IN lists are therefore not a
convenience, they are the delete path.
`GraphEdge` gained an optional `label`, which `normalizeGraph` has to pass
through explicitly or a saved name is dropped on load. `State transition`
replaces `Next state`: it takes the machine on an input port and the name from a
picker, and resolves against the *current* state. Names are deliberately not
unique across a machine -- two states may both have an `alarm` -- so a node named
`alarm` moves whichever state has one, and an empty name follows the single
unnamed edge.
The geometry moved to a Pixi-free `transitions.ts`: a gap to the box border, and
a fan that puts a pair of opposite edges beside each other instead of on top of
each other. Keeping it as plain maths is what let a screenshot bug become a unit
test -- an earlier pin-to-pin line ran under the target node and took its
arrowhead with it, because `nodeLayer` sits above `edgeLayer`.
One limit stands and is not fixed here: `ConnectCommand` rejects a second edge
between the same two states ("Already connected"), because every transition
hangs off the same two ports. With names, `A --alarm--> B` beside
`A --seen--> B` is a sensible pair, so this is worth its own issue.
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
Four ways erase a derived port and take no edge with them: deleting a state,
deleting the `State machine` literal, deleting `Behavior start`/`end`, deleting
the asset. The common cause is `RemoveNodeCommand` clearing only its own graph,
so the fix sits in `drawnDef` (graph/nested.ts) and touches no delete site.
A right-click on an edge goes through `view.portAt` only — there is no curve
hit-test. Without a port row such an edge is not merely invisible, it is
unreachable, so the ghost row is the handle Disconnect hangs on.
`resolveDef` stays untouched: it is the truth for interpreter, compiler,
ConnectCommand and dropTarget, so nothing runs or connects through a ghost
without a second guard.
The asset type `particles` is placeable and carries a graph at the same time —
`behavior` was the blueprint. Because a continuous emitter gives birth to particle n
at time n/rate, the whole field is a function of the clock rather than of the frames:
no ring-buffer bookkeeping, exact time jumps, reproducibility as a measurable property.
compile.ts follows compileShader's frame but emits JS closures into a Float64Array
instead of GLSL, and without eval; a node with two consumers is evaluated once.
Drawing is one Pixi ParticleContainer per source, so one draw call.
Collision, wind and braking in flight are out for good — that is the price of the
formula model, not an omission.
The tab count goes from nine to ten, which is exactly the case #84 was built for one
day earlier: at 1280 px the row no longer holds every tab, so guard 14b now asks for
hidden.length > 0 instead of === 0.
Four new rows on sprite, text, collider and container (block TRANSFORM):
scale, rotation in degrees clockwise, mirrorX, mirrorY. As properties they
get override/reset/apply, loading of old projects, write-back after play and
the Properties node for free; camera and behavior have none.
The hierarchy composes T*R*S per level (composeAlongChain replaces
sumAlongChain), so children rotate and scale with their parent. Reparenting
and grouping keep the look (carriedTransform). Drawing goes through
placeNode, the gizmo is a polygon, cull and objectRect use the AABB, drags
are computed in the parent's system.
Colliders are oriented boxes: SAT for box/box, box-circle in the box frame;
exitDistance replaces axisSeparation/axisCorrection, moveAndSlide moves along
the object's own axes.
Co-Authored-By: Claude Fable 5.1 <noreply@anthropic.com>
Output gains a number input `alpha`; unconnected it reads the texel's
alpha, like `color` reads the texel. The epilogue premultiplies with the
resolved alpha. New `Texture alpha` node exposes texel.a for maths.
PortDef.inline=false keeps the alpha port without an inline field: every
number port is inline by default, and a typed default of 0 would have made
every shaded sprite invisible. The compiler's texel fallback is typed:
colour ports get rgb, number ports get texel.a.
Co-Authored-By: Claude Fable 5.1 <noreply@anthropic.com>
A shader is an asset carrying a node graph (Texture color, Output, Property,
Color, Add/Subtract/Multiply/Divide, Mix, Luminance) that compiles to the GLSL
fragment of a Pixi filter. The Shader tab reuses the Behavior canvas; a sprite
wears a shader through its Shader picker, and the rows below it are the
graph's Property nodes. Property schema, resolution and deviation take the
project because a sprite's rows now live in another asset. The built-in
registry of the prototype is gone; "Adjust colors" ships as a graph in the
fixture and the three example games.
Co-Authored-By: Claude Fable 5.1 <noreply@anthropic.com>
Order per instance: On start -> On enable -> On update ... -> On disable
-> On destroy. On enable fires right after On start and whenever the
behavior comes back on (itself and its parents); On disable in the frame
it goes off, the instance stays frozen. On destroy fires when the entity
leaves the world (Destroy node, child of a destroyed object) and when the
world is torn down on stop/restart, preceded by On disable if still on.
A new On start node added while playing still does not fire for a
running instance (kept as is, documented in the wiki).
Co-Authored-By: Claude Fable 5.1 <noreply@anthropic.com>
A state machine is an asset whose graph holds one `State` node per state
(no ports, name as title), edited in a new "State machine" tab that reuses
the graph canvas: right-click places "State n", snap toggle shared with the
Behavior tab via SnapToggle. `statemachine` is a value kind like texture
(port, literal node, variable, struct field, tagged list item).
Behaviors use it through `State branch` (one exec output per state) and
`Set state` (one exec input per state; the interpreter now hands `run` the
entry port). States live per behavior instance in NodeContext.states, with
no initial state. Ports derive from the inline picker or a wired
`State machine` literal; BehaviorLookup became GraphLookup with
behavior(id) and machine(id).
The Graph tab is labelled "Behavior" (key unchanged). Unit tests
(state-machine, kinds, catalog, ports), e2e step 26 and README added.
Co-Authored-By: Claude Fable 5.1 <noreply@anthropic.com>
- `.gitignore` said `index.html` unanchored, which also caught the Vite source page;
a fresh clone could neither `dev` nor `build`. Anchored to `/index.html`, page added.
- Removed GM_REMOTE (tools/remote/gm-browser.ps1 and the ssh/scp branch in browser.mjs):
the Windows test machine is gone and the only flaky check that lived on it is closed (#37).
- Removed `npm run preview`, undocumented and unused.
- Comments: wrong number in collider.test.ts (250 → 200), the "declarations used to…"
history in listItems.ts and friends, the 24 px/28 contradiction, section banners in
nodes/index.ts, node-catalog.test.ts and api/index.php, name paraphrases, and the stale
step numbers in tools/e2e/11-…23- from the old global count.
- README: asset types include `animation`, kind order Number/Text/Boolean, tagged colour
and texture items, 6/5 kinds, the `Texture` node, `./build.sh`, PROJECT_FORMAT_VERSION,
and the file tree (kinds.ts, listItems.ts, propertyPorts.ts, Breadcrumb.ts, beads.ts,
tools/assets/).
- tests/helpers.ts takes the duplicated `findObject` and `sceneWithCamera`.
Proof: ./check.sh 797 tests, full e2e ALL PASSED 633 checks against this bundle.
Co-Authored-By: Claude Fable 5.1 <noreply@anthropic.com>
A kind like colour or texture used to be spelled out in five parallel
lists, its port type, its empty value, its glyph, its label and its list
tag - 22 literal places for texture alone. core/properties/kinds.ts now
holds one row per kind and the rest is derived from it, so adding a kind
is one row. The five literal nodes collapse into literals.ts, the six
kind menus into one helper.
Number, Text, Boolean is now the one order everywhere; the variable and
port menus used to list Boolean before Text.
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
- `Texture` and `Color` can be picked as a variable kind, a struct field
kind and a declared port kind; a new `Texture` node hands a picture id
into the graph. Declared, a texture is its bare id – the `$texture` tag
stays a list-only thing.
- The `String` node is labelled "Text" like its kind; the type id stays.
- Whole-number inputs (`Item at`, `Set item`, `Sub list`, `Fill`,
`Repeat`, `Substring`, `To text`) show no decimals (`int()` in shared.ts).
- All server projects are reseeded, so `legacyNodes.ts`,
`migrateDeclaredLists` and the `ownerId` fallback go, with their tests.
- Note `reseed-because-of-list` moved to done/; new note `refactor-types`.
Co-Authored-By: Claude Fable 5.1 <noreply@anthropic.com>
A list no longer says what its items are. ListDef.items, ListDef.fields,
ListFieldDef.items and SetListItemsCommand are gone; the single seam is
src/core/properties/listItems.ts. JSON already tells number, text, boolean
and struct apart, so only two kinds need a tag: {"$color": n} and the new
{"$texture": id}. Field names cannot start with "$", so a tag never
collides with a struct field. On a data link a texture item arrives as
its bare id; the graph has no images.
List tab: the mark in front of each row is the kind picker, "+ Item"
asks for the kind, both are ordinary value edits (one undo step). A list
inside a struct field only offers the flat kinds because the depth rule
forbids a struct item there (ListAccess.kinds); the menu used to offer
it and silently do nothing.
Legacy lists that declared items: 'color' are tagged on load.
Actor demo: the four walk animations and four standing frames live in
two list variables of texture items indexed by facing (Item at), so the
graph can be rebuilt in the editor. The stand frames get their grid ids
back; 44 nodes instead of 46.
Also: the user's edits to on-start-during-play.md and the new note
reseed-because-of-list.md.
Verified: check.sh 794 tests, full e2e 631 checks, smokes 24/19/20.
Co-Authored-By: Claude Fable 5.1 <noreply@anthropic.com>
An animation asset is a list of pictures (whole textures or frames) with
frames per second and Loop/Once/Ping-pong playback. A sprite wears it
through its texture property, so the picker, instance overrides and the
Properties node work unchanged; there is no dedicated play node.
A different animation starts from its first frame, the same one set again
runs on, so a graph may choose Run or Idle every frame. The clock lives on
the entity, not in props, which the world writes back as overrides. The
AnimationSystem ticks before behaviors, and On animation finished fires
once when a Once animation reaches its end.
The Animation tab plays a preview above a frame strip: reorder by dragging,
Delete, duplicate, + Frames, pause/resume, and wheel zoom about the pointer
with pan and Fit. Scene and Container tabs show the first frame; edit mode
has no clock. Right-clicking a texture creates an animation from its frames.
Button now measures its label with the bold font it draws in, which cut
the Animation tab and red dialog buttons short.
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
The graph was only locked by five edit-mode guards in GraphCanvas. The
running game reads the graph by reference each frame, so a new node, edge,
changed value, disconnect or undo takes effect from the next frame. Stop
discards these edits like everything else changed in play. A new On start
node does not fire for a behavior that has already started.
During play every data output shows the value it last produced, in the
highlight colour and refreshed ten times a second. Values are kept per
graph, because node ids are only unique within one; with several
instances the most recent value wins. The Variables node reads the live
variable bag, so only its own outputs are kept, as a snapshot.
Each time an exec edge fires, a bead runs along it in 0.3 s, at most one
every 0.15 s per edge, following the same curve the edge is drawn with.
Beads run on game time and freeze while paused; the game logic is
unchanged.
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
A reference search over every export and method in src/ found code that
only tests still called, or that was never called at all:
- RemoveSceneObjectCommand: the product only removes through the
multi-object command; the tests now use that one too.
- NodeRegistry.requireNodeDef: a second function of the same name in
commands/require.ts raises a CommandError instead of throwing, and is
the one the product uses. The twin invited the wrong import.
- isTextureAsset, listContainers, AssetTabEditor.show,
FocusManager.destroy, KeyboardBridge.selectAll and the getters
ColorField.value, ListView.selected, NumberField.number.
Also: Theme.controlActive now matches the resting control colour, and a
new note asks what editing the graph during play would take.
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
Collapsed, the node reads "Set 2 variables", "Get width" or "No properties";
expanded it is always "Variables" / "Properties". The Properties node shows
its object type (and behavior) as a line under the title instead.
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
Get/Set property, Get/Set properties, Set enabled and Set text are gone.
A single Properties node takes a fixed "object" input; every chosen
property is an output that reads the current value, and one switched to
Set is also an input written when the flow arrives. Exec pins only exist
while at least one entry writes.
The node carries a type (Sprite, Text, Collider, Camera, Container,
Behavior, Any) that decides what "+ Property" offers: the fields of that
type, the variables of the chosen behavior, or for Any a kind to pick
and a name to type. Each port takes the default and field of its type,
so a Camera width starts at 640. Switching the type keeps the ports and
marks those the new type lacks. At runtime the type is only an editor
aid; the node writes to whatever object it gets.
Old project files are converted on load. The type is inferred from the
keys: the first object type that has them all, else the one behavior
that declares them all, else Any. enabled belongs to every object, so a
converted Set enabled lands on Any.
The jump-run and tetris seeders use Properties throughout; draw-piece
switches its cell on in the same node that sets the colour.
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
A single node now lists any number of variables. Every entry is an output
that reads the current value whenever it is pulled; an entry switched to
Set is also an input and is written when the flow arrives. Exec pins only
exist while at least one entry writes, and all inputs are read before any
write, so one node can swap two variables.
Get/Set variable, Get/Set variables and Variable are gone. Old project
files are converted on load: each old node becomes a Variables node with
the same variables, edges and typed values.
A written port without a typed value now shows the zero of its kind on
the node body, matching what the inspector shows and what the run writes.
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
Get properties / Set properties work like their variable counterparts:
one port per chosen property, an unconnected input writes its inline
value. A port chosen from the built-in list keeps that property's field
and default (height starts at 100, color is a colour field). "object" is
reserved for the fixed input, checked by the command and on load.
The property picker names the owning type ("Sprite width"), and text
fields can now carry a suggestion list; Get/Set property use it.
Double-clicking a call node shows the path of opened behaviors under the
graph header. Clicking an entry jumps back and trims the path; choosing
a behavior any other way hides it. Reopening a behavior already on the
path steps back to it instead of repeating it. The bar shows before the
graph switches, otherwise it clips the graph that was just fitted.
The "Add node..." header button is gone; nodes come from the context menu.
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
Get/Set variable nodes now title themselves "Get <name>" / "Set <name>", and
the new Variable node just "<name>"; the title is the same folded or open,
and a collapsed node shrinks to it. The redundant "Variable: <name>" row is
gone unless the variable was deleted ("<name>?" is the only hint then).
The Variable node sets its value when an exec flow arrives and exposes the
value at any time. Its output is read when a downstream node pulls it, not
frozen at the write, so count = count + 1 is one Variable node plus an Add.
Get variable keeps reading once per pulse: switching it would change the
behaviour of existing games.
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
Split GraphCanvas (1076 -> 831 lines) into EdgeLayer and graphMenus;
the port and marker menus were the same list and are now one function.
Value specs of the inspector and the list tab share valueSpecs.ts, and
the remaining copies (compound commands, type glyphs, typed asset
lookup, name rule, play/editor world setup, marquee) are merged.
Four copies had already drifted apart; merging them fixes:
- "Disconnect N links" in the port menu is one undo step, not N
- "+ Add collider" is hidden on a placed container instance, as in
the hierarchy menu, instead of always failing
- a bool property coerced from the text "false" becomes false
- a port command on an unknown node type reports instead of crashing
Comment-only edits leave the bundle byte-identical. README corrected in
35 places (step limit, jump-run clock, suite duration, 409 body, ...).
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
A chevron in front of the title toggles it without touching the selection,
and right-click offers Collapse node / Expand node for the whole selection
as one undo step. A collapsed node draws its title bar alone; every link of
one side meets at a single point on it, and hidden links there share one
mark per side, since per-port marks would stack on the same pixels. It has
no ports to grab, so a link dropped on it connects nothing.
Like hiding a link this is drawing only: collapsed is saved on the node and
an expanded node leaves no trace in the project file.
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
The port editor gets 'From variable' next to '+ Field': pick a struct variable
of the behavior and its fields land as ports. It only adds - a field the node
already declares stays as it is, because it may carry an edge - and the entry
is disabled once there is nothing left to add. A list of structs counts too:
it declares the shape of every item, which is exactly the bundle a Pack builds
for it. A color field arrives as a number port; the graph has no color type.
AddPortsCommand is new underneath: adding five ports had to be one undo step,
and it checks every key before it appends a single one, so a collision does
not leave half the list behind. AddPortCommand is a three-line subclass of it,
which leaves its sixteen call sites untouched.
An unconnected list input is a button into the List tab instead of a number
field; a struct field can hold a list, so ListSlot carries an optional field
name and the three owner cases only say what sits at a key; and a list
variable picks its item kind in the inspector (marker doubles as the chooser),
so a list of structs no longer has to be born from a project file.
The declaration keeps the storable shapes finite: a struct field may be a list,
but that list holds primitives only, so list->struct->primitive and
struct->list->primitive are the two deepest forms.
check 674, e2e 483, jump-run 24, Tetris 19.
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
A list item may now be a struct. The depth is bounded in the declaration
rather than by a comment: FieldKind (number|text|boolean|color) says what a
struct field holds, ListItemKind adds struct on top and says what a list
holds, so list -> struct -> primitive is the deepest storable shape and
sameValue stays finite. A struct item renders inline in the List tab, which
is why it needs no path in the slot address.
Four paths silently assumed a list item was a primitive: sameValue compared
items with ===, textOf would have printed [object Object], asListItem turned
a struct into text on Set item and Fill, and Index of used indexOf, which is
reference equality and could never have found a struct.
Tetris now runs on bundles. shapes is 112 {x, y} structs instead of 224 loose
numbers, piece and the candidate are structs, so Next move hands back a whole
candidate and each strand packs only the field it changes, since mergeStruct
leaves the rest standing. Declared behavior ports drop 49 -> 35, the master's
variables 18 -> 13, its graph 84/94 -> 69/76 nodes/edges.
Get variables and Set variables declare their ports from a list of variable
names, the way Pack and Expand already do, so one node can read or write
several at once. Renaming a variable rewires them, because there the port key
is the variable name.
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
A short list opened after a long one drew all its rows stacked on one
point. The fault was not in the list tab: rebuild() handed the row stack
to setContent() while it was still empty, so the content was sized to
max(rows, viewport) = the viewport. The rows arrived after that, and for
a short list the same formula yields the same height, so resize() saw no
change and skipped layout(). A long list changes the height and never
showed it.
relayoutContent() now runs whenever the content changed, rather than
leaning on resize()'s change detection - that detection is the wrong
instrument for "the children moved".
The list tab was the only affected caller: the panels use ListView,
which positions its rows itself, and the inspector fills its body
before setContent.
Also drops the comma line under the list. Every section that can carry a
list supplies openList, so the comma fallback in fieldFactory was
unreachable; listToText/listFromText go with it. The list-value test now
covers coerceListItem through coerceValue instead, so the boolean
spelling stays guarded.
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
The Outputs setting is gone. A Sequence now keeps one free output below the
last connected one: nothing plugged in is one output, connecting the spare
grows a new one, unplugging the bottom edge shrinks it back.
It counts the last *connected* port rather than the number of edges, so
unplugging a middle one leaves a gap instead of silently dropping an edge.
Removing the setting also removes a bug it caused. Typing in the Outputs field
did nothing and the arrow keys did nothing, while dragging the value worked:
onInput fires per keystroke, the preview writes into node.params, that emits
'project', and Inspector.refreshValues() sees the node's signature change --
the port list is part of it -- so it rebuilds and destroys the row being typed
in. A drag survives because it keeps receiving globalpointermove on the old
widget. refreshValues() has no focus guard where refreshLive() does; the trap
is still there for the next typed field that changes a node's shape.
Ports that depend on the edges around a node mean derivePorts needs the graph,
not just the params, so resolveDef and portSignature take it too. And a node
whose ports are derived cannot know how many it has from its type, so run is
handed the definition resolved for it.
Ports that vary per node already existed, but only for the three nested-behavior
types, and the rule for them sat as a switch on type names in nested.ts – the
one place in the project that knew node types by name. It dissolves into two
optional contracts on NodeDef, so a type carries its own rule:
declaresPorts the node holds an editable list, shown as a section in the
inspector – behavior start/end, and now Pack/Expand
derivePorts the node computes them from its settings – Sequence from a
count, Run behavior from the behavior it names
Sequence gains an Outputs setting (2 to 26). Its keys stay a, b, c and count on
with d, e, so the edges of the sequences already out there survive.
A param can now take a port away, and the edge on it would stay: it draws as
nothing yet survives every save, and comes back to life if the port returns.
SetNodeParamCommand takes those edges with it, which also closes the same leak
that switching a Run behavior node's target has always had.
The port editor addresses its node by id rather than by type, so two Pack nodes
can live in one graph, and it calls the rows Fields when they are not a
behavior's signature.
PropertyValue was number | string | boolean | list. A struct joins it, which
costs two things the typechecker found rather than I did.
An object on a data edge used to mean a live entity, so asEntity would have
taken a struct for one and asString would have read .name off it. EntityHandle
now carries a symbol brand – a symbol so no field name can impersonate it, and
it never serializes, which suits a thing that exists only while the game runs.
It is built in exactly one place.
String(value) would have written a struct as [object Object] at 39 call sites.
They go through textOf(), which is identical for primitives.
normalizeGraph dropped everything but primitives from node params, so the List
node lost its value on every save ([3,1,4] round-tripped to undefined).
Variables were spared: they have a schema, params have none.
objectSection.ts had grown to 559 lines around three separable parts: the
queries, the vector rows and the parent row. Four object commands repeated the
same capture/restore preamble – applyCommands stays out, its five carry extra
undo state whose restore order matters.
58 dashed banner comments are gone. The nine labels in nodes/index.ts stay:
they are the only structure a flat 90-entry array has.
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
The two On key down fields read in milliseconds now, and say so in their
labels. A number field shows three decimals unless a property asks for
fewer, so both params set decimals: 0 – the field reads 300, not 300.000,
and rounds to whole milliseconds while typing or scrubbing. The clock
behind it still counts seconds; the conversion sits at the one place that
reads the properties.
A held key fired once and then nothing, so sliding a Tetris piece sideways or
walking a menu meant building a timer next to every key node. Two settings on
the node do it now: Repeat after and Repeat interval, both in milliseconds so
the usual values stay whole numbers (300, 50) instead of 0.3 and 0.05. A delay
of 0 keeps the node exactly as it was, an interval of 0 means every frame.
The browser's own auto-repeat is deliberately not used - Input.press has always
dropped it - because its delay and rate are an operating-system setting of the
player's, not a game's. The repeat is built from the measured hold time instead,
per node, so two nodes on one key keep their own clocks. The rule itself is a
pure function in keyRepeat.ts and is checked without a world.
Both rows stay off the node body while the delay is 0: two lines of "0" on every
key node in every graph would be noise, and the screenshot said so. NodeDef gains
hiddenParams for that; the inspector still shows them.
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
A link can be folded away from the canvas: instead of a curve running clear
across the graph, each end grows a short stub with a mark naming the node at
the far side. The curve comes back while either of its two nodes is selected,
so following a connection is a click rather than a search, and a link carrying
a live pulse is always drawn so the trace keeps its thread.
Marks are collected per port, not per link, because several hidden links on one
port used to stack stubs, dots and labels on identical pixels. A bundle reads
"Move +1" and its dot selects every node the port feeds, as one undo step.
The whole thing is one optional flag on the edge; the interpreter never sees it.
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
A variable could only be a number, a text or a yes/no, so every set of values had
to be smuggled through a string - which is where Tetris got its unreadable
"03066326048763714" colours from. A list is now a value of its own, with an item
kind (number, text, yes/no, colour) that decides how the inspector reads the one
comma-separated line it is typed as, and eight nodes to work with: List, Fill,
Count, Item at, Set item, Sub list, Join lists, Index of.
Two traps came with it. An array is typeof 'object', so every place that told a
value from an entity had to learn the difference, or a list would have been
passed around as a game object. And a value was compared by identity in three
places - with lists that marks everything as an overridden property after each
reload, so those comparisons now compare contents.
There is no list of objects: a list is written to the project file and an object
is a live handle that no reload survives. A set of objects stays a list of names.
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
A behavior node that cannot run looked exactly like a healthy one: no
start node, no behavior picked, a deleted behavior or a self-call were
all silently skipped. The call still had to be forgiving at runtime -- a
dangling reference must not abort a game -- so the fix is diagnosis, not
an exception: describeProblem() names the one reason, the node draws it
in red under its title, and the inspector repeats it where you pick the
behavior. A missing end node is deliberately not a problem: a call is
always synchronous, and the end node only decides which values come back.
Two ways in: a behavior dragged from the asset panel lands in the graph
under the pointer, and double-clicking a call node opens the graph it
runs. Both reuse machinery that already existed -- the asset panel
already starts the drag, and list views already report double clicks.
The e2e module needed its assets at the head of the asset list: after 18
modules the list is long enough that a newly appended row scrolls out of
view, and the press then lands on the panel behind it, starting no drag
at all. That looked exactly like a rejected drop and cost two full runs.
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
A behavior that has a Start and an End node can now be dropped into any
other graph as a node of its own. What is declared on the start node
becomes the inputs of that node, what hangs on the end node its outputs;
the port list is derived from the sub graph, not copied, so declaring a
port in one graph grows the node in the other without touching it. The
node carries the behavior's name and the palette lists behaviors by
name, so a call is one grab instead of a node plus a dropdown.
An embedded behavior has no object and therefore no place for
variables: every call starts on the asset defaults and communicates
only through its ports. That is the conservative direction - state can
still be added later, and shared state already has a home in a behavior
object in the scene. Node ids are unique per graph only, so each call
gets its own pulse cache; without that, two graphs would collide.
Renaming a port used to silently drop the value typed on the calling
node. It is carried along now, project wide, like the edges.
A Tetris example project needs to draw 200 board cells and scan rows
for a full line. Neither is expressible without iteration, so the node
system gets a Repeat node plus the missing text side: Substring, Find
text and To number. The interpreter drops its data cache once per
round -- otherwise every round would recompute with the first round's
values.
Object by name takes its name as an input now, not just as a setting;
addressing "c" + index is impossible otherwise. An unconnected input
reads the stored setting, so saved projects are untouched.
The board itself is a 200-character text, "." for empty. That makes
both operations of Tetris a single expression instead of a loop, and
each frame attempts exactly one move -- rotate beats sideways beats
fall -- so the fit check exists once in the whole graph.
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
Dragging an edge now rings the port it would connect to and snaps the line
there. A drop on a node's body takes that node's first free compatible port,
or the last compatible one when none is free, replacing its link. A drop into
empty space opens the palette filtered to the node types the edge could reach
at all, and the picked node arrives wired - node and link as one undo step,
so a single undo takes back the whole gesture.
The decision of what fits what lives in core/graph/dropTarget.ts as pure
functions, tested directly; the canvas only draws the answer. The palette
takes an optional filter rather than knowing about drags.
Verified remote on the Windows box (GPU): ALL PASSED, 284 checks.
Remove comments that only restate the code, keeping the section banners
and the notes that carry a reason, a measured fact or an external
contract.
ButtonOptions.width claimed to be a fixed width but only set minWidth,
so the Graph and Texture pickers grew with the name they showed. It is
now what it promises, with a separate minWidth for the buttons that have
two forms. Narrow buttons shrink their padding, otherwise a 24px icon
button had 8px left for its glyph and truncate dropped it entirely.
__gm.labelsDropped() guards that class: the overflow guard only saw text
that was too wide, never a label truncated to nothing.
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
Images are uploaded to a content-addressed blob endpoint and stored as
data/textures/<sha256>.<ext>; the project only keeps the file name. The
sprite points at a texture asset through an ordinary property of the new
kind `asset`, so instance overrides, "Apply to container", "Reset to
asset", undo and `Set property` work without any extra code. The new kind
also replaces the ad-hoc asset picker the graph nodes faked as an enum.
Import goes through + -> Texture, drag & drop onto the canvas or Ctrl+V.
Images wider than 2048px are downscaled client-side and re-encoded to
WebP if needed, because nginx caps uploads at 1MB; an image that already
fits is uploaded byte for byte so pixel art is never resampled.
The sprite colour default changes from red to white, since colour tints
the texture multiplicatively and a tint of white shows an image as it is.
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
Tooling:
- Prettier as the single formatting authority (110 columns, single quotes,
measured against the existing style); Markdown excluded because table-cell
padding turns the README glossary into 1000-character lines.
- Type-aware ESLint ending in eslint-config-prettier, so a rule always means
"this is a bug", never "this looks different".
- .editorconfig and an `npm run check` that runs typecheck, lint, format and
tests in one go.
Findings fixed on the first run: three more duplicate imports, four
String(unknown) calls (parameter types narrowed instead of casts), two dead
initialisers, two redundant casts, a console.log for a real error. Two
warnings were false here and are disabled with a reason in place.
Tests 132 -> 269:
- node-catalog.test.ts covers every node with a run(), with a guard that fails
when a new node has no row.
- behavior-events.test.ts covers the ten event nodes through a running World,
checking timing rather than existence.
- Input's state machine (press/release/releaseAll) is reachable without DOM
events now; the DOM handlers are thin adapters.
Compare fell back to == without a configured operator although the schema
default is <; aligned.
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
- SceneObject.editorOffset (x/y): shifts only where an object is drawn in
the Scene tab, cascades to children, undo-able with a reset action.
Never written into container templates.
- On click without an owner now fires for any click inside the camera
frame instead of hit-testing the (editor-only) behavior symbol.
- seed-jumprun: coins are a "Coin" container (sprite + trigger), nested
containers are expanded recursively, Destroy targets the coin's parent,
and the clock uses a Ceil node instead of ToText.
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
Engine additions that the example game needed:
- `enabled` as a shared property of every placeable asset (default on, an
override on the scene object). A switched-off object is not drawn, does not
collide and its behavior does not run - and neither does anything parented
below it. Disabled objects are now hidden in the scene view as well, so the
editor shows what the game shows; they stay in the hierarchy panel, which is
where they are selected and switched back on.
- Asset type `text` (text, fontSize, color, align), rendered in scene and game.
- Pointer input in the game view: `On click`, `Mouse position`, `Mouse button`,
`Is hovered`, hit-tested against colliders, else sprite/text footprints.
- New nodes: Set/Is enabled, Set text, Is asset, Name of, Equals, To text,
Join text, Floor/Ceil/Round, Modulo, Random, Time, Restart game.
Tooling: shared CDP harness (tools/harness.mjs), central project registry with
a guard that keeps destructive scripts off the playground (tools/projects.mjs),
plus smoke suites for the demo scene and the jump-and-run game.
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
- Collider property isTrigger (no blocking, still reports enter/stay/exit)
- Node 'Move and slide' with blocked x/y outputs, axis-wise resolution
- axisSeparation/axisCorrection geometry for box/box, circle/circle, box/circle
- Amber outline for trigger colliders in the viewport
- Demo mover uses Move and slide; E2E step 15b, 7 new unit tests
Co-Authored-By: Claude Fable 5.1 <noreply@anthropic.com>
- Asset type 'collider' (box/circle) placed as child of a body object
- 'Add collider' shortcut (hierarchy context menu + inspector)
- CollisionSystem with enter/stay/exit pairs, sibling colliders excluded
- Nodes: On collision enter/stay/exit, Is touching
- Green outline in edit mode, hidden in play
Co-Authored-By: Claude Fable 5.1 <noreply@anthropic.com>
