Get properties / Set properties work like their variable counterparts:
one port per chosen property, an unconnected input writes its inline
value. A port chosen from the built-in list keeps that property's field
and default (height starts at 100, color is a colour field). "object" is
reserved for the fixed input, checked by the command and on load.
The property picker names the owning type ("Sprite width"), and text
fields can now carry a suggestion list; Get/Set property use it.
Double-clicking a call node shows the path of opened behaviors under the
graph header. Clicking an entry jumps back and trims the path; choosing
a behavior any other way hides it. Reopening a behavior already on the
path steps back to it instead of repeating it. The bar shows before the
graph switches, otherwise it clips the graph that was just fitted.
The "Add node..." header button is gone; nodes come from the context menu.
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
Adding a collider now lives only in the Scene objects context menu, deleting a node on
the Delete key and the node context menu. The e2e checks that pinned the inspector button
now drive the hierarchy menu instead, including that its entry is disabled on template
content and on a placed container without raising a notice.
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
Split GraphCanvas (1076 -> 831 lines) into EdgeLayer and graphMenus;
the port and marker menus were the same list and are now one function.
Value specs of the inspector and the list tab share valueSpecs.ts, and
the remaining copies (compound commands, type glyphs, typed asset
lookup, name rule, play/editor world setup, marquee) are merged.
Four copies had already drifted apart; merging them fixes:
- "Disconnect N links" in the port menu is one undo step, not N
- "+ Add collider" is hidden on a placed container instance, as in
the hierarchy menu, instead of always failing
- a bool property coerced from the text "false" becomes false
- a port command on an unknown node type reports instead of crashing
Comment-only edits leave the bundle byte-identical. README corrected in
35 places (step limit, jump-run clock, suite duration, 409 body, ...).
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
The port editor gets 'From variable' next to '+ Field': pick a struct variable
of the behavior and its fields land as ports. It only adds - a field the node
already declares stays as it is, because it may carry an edge - and the entry
is disabled once there is nothing left to add. A list of structs counts too:
it declares the shape of every item, which is exactly the bundle a Pack builds
for it. A color field arrives as a number port; the graph has no color type.
AddPortsCommand is new underneath: adding five ports had to be one undo step,
and it checks every key before it appends a single one, so a collision does
not leave half the list behind. AddPortCommand is a three-line subclass of it,
which leaves its sixteen call sites untouched.
A list item may now be a struct. The depth is bounded in the declaration
rather than by a comment: FieldKind (number|text|boolean|color) says what a
struct field holds, ListItemKind adds struct on top and says what a list
holds, so list -> struct -> primitive is the deepest storable shape and
sameValue stays finite. A struct item renders inline in the List tab, which
is why it needs no path in the slot address.
Four paths silently assumed a list item was a primitive: sameValue compared
items with ===, textOf would have printed [object Object], asListItem turned
a struct into text on Set item and Fill, and Index of used indexOf, which is
reference equality and could never have found a struct.
Tetris now runs on bundles. shapes is 112 {x, y} structs instead of 224 loose
numbers, piece and the candidate are structs, so Next move hands back a whole
candidate and each strand packs only the field it changes, since mergeStruct
leaves the rest standing. Declared behavior ports drop 49 -> 35, the master's
variables 18 -> 13, its graph 84/94 -> 69/76 nodes/edges.
Get variables and Set variables declare their ports from a list of variable
names, the way Pack and Expand already do, so one node can read or write
several at once. Renaming a variable rewires them, because there the port key
is the variable name.
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
A list property in the inspector was a single text field holding a comma
separated line -- unreadable past a handful of items, and it could not
carry anything but text. It becomes a button ("3 items") that opens a
sixth centre tab, where every item is a row built by the very widget the
inspector would build for that item kind.
The renderer was free: a PropertyDef of kind 'list' already carries
`items`, so item i becomes a synthetic def of that kind -- number, text,
boolean and colour rows appear without a new branch.
The way into the tab goes through the state (EditorState.listSlot,
openList(), event 'list'), like every other tab switch here; a tab may
not call showTab itself. ListSlot lives next to Selection rather than in
the tab folder, or state.ts would have to import upwards.
A row's handlers must not close over a snapshot of the list: they outlive
a commit, since the tab only rebuilds when the length changes, and the
second edited row would otherwise revive the value the first replaced.
showTab switched five `visible` lines by hand, where a sixth tab is
silently forgotten; it is a Record<CentreTab, Widget> now.
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
The Outputs setting is gone. A Sequence now keeps one free output below the
last connected one: nothing plugged in is one output, connecting the spare
grows a new one, unplugging the bottom edge shrinks it back.
It counts the last *connected* port rather than the number of edges, so
unplugging a middle one leaves a gap instead of silently dropping an edge.
Removing the setting also removes a bug it caused. Typing in the Outputs field
did nothing and the arrow keys did nothing, while dragging the value worked:
onInput fires per keystroke, the preview writes into node.params, that emits
'project', and Inspector.refreshValues() sees the node's signature change --
the port list is part of it -- so it rebuilds and destroys the row being typed
in. A drag survives because it keeps receiving globalpointermove on the old
widget. refreshValues() has no focus guard where refreshLive() does; the trap
is still there for the next typed field that changes a node's shape.
Ports that depend on the edges around a node mean derivePorts needs the graph,
not just the params, so resolveDef and portSignature take it too. And a node
whose ports are derived cannot know how many it has from its type, so run is
handed the definition resolved for it.
Ports that vary per node already existed, but only for the three nested-behavior
types, and the rule for them sat as a switch on type names in nested.ts – the
one place in the project that knew node types by name. It dissolves into two
optional contracts on NodeDef, so a type carries its own rule:
declaresPorts the node holds an editable list, shown as a section in the
inspector – behavior start/end, and now Pack/Expand
derivePorts the node computes them from its settings – Sequence from a
count, Run behavior from the behavior it names
Sequence gains an Outputs setting (2 to 26). Its keys stay a, b, c and count on
with d, e, so the edges of the sequences already out there survive.
A param can now take a port away, and the edge on it would stay: it draws as
nothing yet survives every save, and comes back to life if the port returns.
SetNodeParamCommand takes those edges with it, which also closes the same leak
that switching a Run behavior node's target has always had.
The port editor addresses its node by id rather than by type, so two Pack nodes
can live in one graph, and it calls the rows Fields when they are not a
behavior's signature.
A behavior node that cannot run looked exactly like a healthy one: no
start node, no behavior picked, a deleted behavior or a self-call were
all silently skipped. The call still had to be forgiving at runtime -- a
dangling reference must not abort a game -- so the fix is diagnosis, not
an exception: describeProblem() names the one reason, the node draws it
in red under its title, and the inspector repeats it where you pick the
behavior. A missing end node is deliberately not a problem: a call is
always synchronous, and the end node only decides which values come back.
Two ways in: a behavior dragged from the asset panel lands in the graph
under the pointer, and double-clicking a call node opens the graph it
runs. Both reuse machinery that already existed -- the asset panel
already starts the drag, and list views already report double clicks.
The e2e module needed its assets at the head of the asset list: after 18
modules the list is long enough that a newly appended row scrolls out of
view, and the press then lands on the panel behind it, starting no drag
at all. That looked exactly like a rejected drop and cost two full runs.
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
A behavior that has a Start and an End node can now be dropped into any
other graph as a node of its own. What is declared on the start node
becomes the inputs of that node, what hangs on the end node its outputs;
the port list is derived from the sub graph, not copied, so declaring a
port in one graph grows the node in the other without touching it. The
node carries the behavior's name and the palette lists behaviors by
name, so a call is one grab instead of a node plus a dropdown.
An embedded behavior has no object and therefore no place for
variables: every call starts on the asset defaults and communicates
only through its ports. That is the conservative direction - state can
still be added later, and shared state already has a home in a behavior
object in the scene. Node ids are unique per graph only, so each call
gets its own pulse cache; without that, two graphs would collide.
Renaming a port used to silently drop the value typed on the calling
node. It is carried along now, project wide, like the edges.
Remove comments that only restate the code, keeping the section banners
and the notes that carry a reason, a measured fact or an external
contract.
ButtonOptions.width claimed to be a fixed width but only set minWidth,
so the Graph and Texture pickers grew with the name they showed. It is
now what it promises, with a separate minWidth for the buttons that have
two forms. Narrow buttons shrink their padding, otherwise a 24px icon
button had 8px left for its glyph and truncate dropped it entirely.
__gm.labelsDropped() guards that class: the overflow guard only saw text
that was too wide, never a label truncated to nothing.
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
Images are uploaded to a content-addressed blob endpoint and stored as
data/textures/<sha256>.<ext>; the project only keeps the file name. The
sprite points at a texture asset through an ordinary property of the new
kind `asset`, so instance overrides, "Apply to container", "Reset to
asset", undo and `Set property` work without any extra code. The new kind
also replaces the ad-hoc asset picker the graph nodes faked as an enum.
Import goes through + -> Texture, drag & drop onto the canvas or Ctrl+V.
Images wider than 2048px are downscaled client-side and re-encoded to
WebP if needed, because nginx caps uploads at 1MB; an image that already
fits is uploaded byte for byte so pixel art is never resampled.
The sprite colour default changes from red to white, since colour tints
the texture multiplicatively and a tint of white shows an image as it is.
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
Tooling:
- Prettier as the single formatting authority (110 columns, single quotes,
measured against the existing style); Markdown excluded because table-cell
padding turns the README glossary into 1000-character lines.
- Type-aware ESLint ending in eslint-config-prettier, so a rule always means
"this is a bug", never "this looks different".
- .editorconfig and an `npm run check` that runs typecheck, lint, format and
tests in one go.
Findings fixed on the first run: three more duplicate imports, four
String(unknown) calls (parameter types narrowed instead of casts), two dead
initialisers, two redundant casts, a console.log for a real error. Two
warnings were false here and are disabled with a reason in place.
Tests 132 -> 269:
- node-catalog.test.ts covers every node with a run(), with a guard that fails
when a new node has no row.
- behavior-events.test.ts covers the ten event nodes through a running World,
checking timing rather than existence.
- Input's state machine (press/release/releaseAll) is reachable without DOM
events now; the DOM handlers are thin adapters.
Compare fell back to == without a configured operator although the schema
default is <; aligned.
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
