The suite spent 88% of its step time asleep: 564 s of steps, 496 s of
them in sleep(n) - fixed spans estimated by hand and then copied from
step to step. That is why it was slow, and why it flickered.
The signal is afterFrames(count, timeout) in ui/render.ts, exposed as
__gm.afterFrames(). It wakes the loop itself, because an editor that
draws nothing would never redeem a promise of a frame, and it gives up
after a timeout instead of hanging the run. settle() in the harness
waits two drawn frames (~32 ms) instead of 150-300 ms and falls back to
sleep(150) when the hook is missing (an old build): silently not
waiting would make every later check a coin toss.
Every action goes through it now - click, doubleClick, wheel, drag,
dragAsset, press, typeText, select, mutate, undo, redo - and with that
about 550 sleep() calls behind those actions became redundant, helpers
that are nothing but a mutate in a coat included. What a frame cannot
answer got its own condition instead: waitUntil(expr), play()/stop()
waiting on __gm.state.mode rather than on 300 ms, saved() for the
autosave (the two hand-written polling loops sampled at 300 ms for
something that arrives after a second), and showTab() as a real tool -
47 places called evaluate("__gm.showTab(...)") raw, and 24 of them
waited for nothing at all and read the old panel.
564 s -> 243 s of step time, the waiting share 88% -> 76%. Three kinds
of wait were kept, and each one bit when it was taken away: loading
bytes (textures, fonts), game time that a repaint cannot stand in for
(time scale, shader and particle clocks, the live values a running
graph carries), and the inertia the scroll step measures on purpose.
Two things the new speed uncovered, both real: 25-animation read the
frame menu unfiltered and had frozen an incomplete list (the CI failure
on c990dbc), and 33-render-on-change measured idleness while the
autosave of the step before was still painting - it waits for
saveStatus to leave dirty/saving now, so it measures that nothing
happens any more instead of that it waited long enough.
A log layer (src/editor/console/log.ts) keeps a 500-line ring buffer and
wraps console.log/info/debug/warn/error, still calling the original. Notices
and behaviour runtime errors go straight to the layer instead of through
console, so editor tests stay quiet and errors can render red. world.log is
untouched: it is per-run structured state that runtime tests and e2e read
directly, not a text stream.
The panel sits under the visible tab, resizable with Splitter('y'), with a
CONSOLE header and a clear button. Each line carries its wall-clock time in
its own dimmed column, so locate() still finds the message text.
The taller centre area drops the graph fit zoom to 0.60, which broke six e2e
checks that assumed one screen pixel is one graph unit and that a fixed
offset from the canvas centre is empty. They now ask __gm.emptySpot(),
__gm.graph.emptySpot() and __gm.graph.zoom() instead of guessing.
locate/locateAll added the unscaled Pixi text width to the global position,
so click points in the scaled graph canvas landed too far right; they use
getBounds() now.
check.sh: 831 tests. Full e2e: ALL PASSED - 671 checks. Smokes 24/19/20.
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
- `Texture` and `Color` can be picked as a variable kind, a struct field
kind and a declared port kind; a new `Texture` node hands a picture id
into the graph. Declared, a texture is its bare id – the `$texture` tag
stays a list-only thing.
- The `String` node is labelled "Text" like its kind; the type id stays.
- Whole-number inputs (`Item at`, `Set item`, `Sub list`, `Fill`,
`Repeat`, `Substring`, `To text`) show no decimals (`int()` in shared.ts).
- All server projects are reseeded, so `legacyNodes.ts`,
`migrateDeclaredLists` and the `ownerId` fallback go, with their tests.
- Note `reseed-because-of-list` moved to done/; new note `refactor-types`.
Co-Authored-By: Claude Fable 5.1 <noreply@anthropic.com>
A list no longer says what its items are. ListDef.items, ListDef.fields,
ListFieldDef.items and SetListItemsCommand are gone; the single seam is
src/core/properties/listItems.ts. JSON already tells number, text, boolean
and struct apart, so only two kinds need a tag: {"$color": n} and the new
{"$texture": id}. Field names cannot start with "$", so a tag never
collides with a struct field. On a data link a texture item arrives as
its bare id; the graph has no images.
List tab: the mark in front of each row is the kind picker, "+ Item"
asks for the kind, both are ordinary value edits (one undo step). A list
inside a struct field only offers the flat kinds because the depth rule
forbids a struct item there (ListAccess.kinds); the menu used to offer
it and silently do nothing.
Legacy lists that declared items: 'color' are tagged on load.
Actor demo: the four walk animations and four standing frames live in
two list variables of texture items indexed by facing (Item at), so the
graph can be rebuilt in the editor. The stand frames get their grid ids
back; 44 nodes instead of 46.
Also: the user's edits to on-start-during-play.md and the new note
reseed-because-of-list.md.
Verified: check.sh 794 tests, full e2e 631 checks, smokes 24/19/20.
Co-Authored-By: Claude Fable 5.1 <noreply@anthropic.com>
Collapsed, the node reads "Set 2 variables", "Get width" or "No properties";
expanded it is always "Variables" / "Properties". The Properties node shows
its object type (and behavior) as a line under the title instead.
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
A single node now lists any number of variables. Every entry is an output
that reads the current value whenever it is pulled; an entry switched to
Set is also an input and is written when the flow arrives. Exec pins only
exist while at least one entry writes, and all inputs are read before any
write, so one node can swap two variables.
Get/Set variable, Get/Set variables and Variable are gone. Old project
files are converted on load: each old node becomes a Variables node with
the same variables, edges and typed values.
A written port without a typed value now shows the zero of its kind on
the node body, matching what the inspector shows and what the run writes.
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
Get/Set variable nodes now title themselves "Get <name>" / "Set <name>", and
the new Variable node just "<name>"; the title is the same folded or open,
and a collapsed node shrinks to it. The redundant "Variable: <name>" row is
gone unless the variable was deleted ("<name>?" is the only hint then).
The Variable node sets its value when an exec flow arrives and exposes the
value at any time. Its output is read when a downstream node pulls it, not
frozen at the write, so count = count + 1 is one Variable node plus an Add.
Get variable keeps reading once per pulse: switching it would change the
behaviour of existing games.
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
Split GraphCanvas (1076 -> 831 lines) into EdgeLayer and graphMenus;
the port and marker menus were the same list and are now one function.
Value specs of the inspector and the list tab share valueSpecs.ts, and
the remaining copies (compound commands, type glyphs, typed asset
lookup, name rule, play/editor world setup, marquee) are merged.
Four copies had already drifted apart; merging them fixes:
- "Disconnect N links" in the port menu is one undo step, not N
- "+ Add collider" is hidden on a placed container instance, as in
the hierarchy menu, instead of always failing
- a bool property coerced from the text "false" becomes false
- a port command on an unknown node type reports instead of crashing
Comment-only edits leave the bundle byte-identical. README corrected in
35 places (step limit, jump-run clock, suite duration, 409 body, ...).
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
The port editor gets 'From variable' next to '+ Field': pick a struct variable
of the behavior and its fields land as ports. It only adds - a field the node
already declares stays as it is, because it may carry an edge - and the entry
is disabled once there is nothing left to add. A list of structs counts too:
it declares the shape of every item, which is exactly the bundle a Pack builds
for it. A color field arrives as a number port; the graph has no color type.
AddPortsCommand is new underneath: adding five ports had to be one undo step,
and it checks every key before it appends a single one, so a collision does
not leave half the list behind. AddPortCommand is a three-line subclass of it,
which leaves its sixteen call sites untouched.
A list item may now be a struct. The depth is bounded in the declaration
rather than by a comment: FieldKind (number|text|boolean|color) says what a
struct field holds, ListItemKind adds struct on top and says what a list
holds, so list -> struct -> primitive is the deepest storable shape and
sameValue stays finite. A struct item renders inline in the List tab, which
is why it needs no path in the slot address.
Four paths silently assumed a list item was a primitive: sameValue compared
items with ===, textOf would have printed [object Object], asListItem turned
a struct into text on Set item and Fill, and Index of used indexOf, which is
reference equality and could never have found a struct.
Tetris now runs on bundles. shapes is 112 {x, y} structs instead of 224 loose
numbers, piece and the candidate are structs, so Next move hands back a whole
candidate and each strand packs only the field it changes, since mergeStruct
leaves the rest standing. Declared behavior ports drop 49 -> 35, the master's
variables 18 -> 13, its graph 84/94 -> 69/76 nodes/edges.
Get variables and Set variables declare their ports from a list of variable
names, the way Pack and Expand already do, so one node can read or write
several at once. Renaming a variable rewires them, because there the port key
is the variable name.
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
admin
