a526e1b40f27c892e79b2e72a730874fb71b084a
13
Commits
| Author | SHA1 | Message | Date | |
|---|---|---|---|---|
  adminandClaude Opus 5.5
|
a526e1b40f |
Use a shader graph as a node in other shaders (#303)
A calculation needed in several shaders (a greyscale, a noise, an outline) had to be built again in every one of them. A shader function keeps it as an asset of its own, called like a behavior is since #16. - New asset type `shaderfunction` ("Shader function"), edited in the Shader tab. The panel beside the graph shows no picture, the readout counts its inputs and outputs. - Two new nodes: `Function input` and `Function output`. Their declared ports, numbers or colours only, are the ports of every call. One of each per function, like Start and End. - The call is node `ShaderCall`, named after the function. The palette lists every function, it can be dragged in from the Assets panel, and a double-click opens it. - The compiler sets the function in where it is called (`inlineFunctions`). It renames the copied nodes `<call>/<node>` and turns an unconnected port into a constant. Passes, Time, the Edge cut and the corner walk then see a plain graph. - A problem inside a function is reported at the call, in the function's words. The function's own tab checks it on its own (`checkShaderFunction`). - `ShaderLibrary` keys a shader on its graph and on every function it calls, however deep, so a change reaches every caller. - The port commands mirror a new, renamed or removed port into every call, as for a behavior's Start and End. `NodeDef.portKinds` holds the two ends to Number and Color. - As agreed in the issue: no `Property`, `Color property`, Output or Vertex output in a function, and `Time` is the caller's clock. - Own decision: a `Pass` may stand in a function. It becomes a pass of the calling shader, so a wide blur can be a function. - A function calling itself, also through another, says so at the node and is not set in. The palette does not offer such a call. - The Shader tab showed only the compiler's problems. A call nothing reaches was never compiled and looked healthy, so a call now also shows its own problem there, as in a behavior. Tests: - Gate: 228 files, 3510 tests, CHECK EXIT 0 (+13: 11 in tests/core/shader-functions.test.ts, 2 for the new icon) - e2e 28: 100 checks, all passed (+3 in 28l-viii). Called and in place both #606060/#a2a2a2, halved in the function #303030/#515151. - Counter-check: a fingerprint without the called functions fails 1 unit test, and in the browser the change check (#606060 stays). - The first e2e runs found two faults, both fixed: a double-click only selected the function, and an unreached call of itself showed no problem. - e2e total 1728 is computed (1725 + 3). Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> |
||
|
adminandClaude Opus 5.5
|
46c620ae3b |
Give a behavior more ways in and out, and hear it as an event (#294)
A behavior run by another one had a single flow port at its Start and at its End, so it could not branch for its caller. And it could not be used as an event: a call needs a pulse at its flow input, and the events of a called graph never fire. An input like "Confirm" (Space or Enter) had to be built again in every graph. - A declared port of a Start or an End node can be of the kind Flow. It sits above the values and shares their names, exec stays reserved. Only these two nodes declare one, a struct does not. - Run behavior shows a flow port of the Start as a further flow input. A call arriving through it leaves the Start through the output of that name and not through exec. - Run behavior shows a flow port of the End as a further flow output. The call goes on through the one the End was reached by last, and then through exec. exec fires always, as before. - On behavior is a new event node without a flow input. The behavior it names runs at the node for as long as the behavior around it runs, with all of its own events and one set of variables per node. - Its outputs are those of the End. It fires once the inner pulse is through, by the output the End was reached by last, exec only for End.exec. A pulse that never reaches the End is not seen. - The value ports of the Start are its inputs, read anew for each inner pulse. The Start itself never fires there. - It nests to any depth. Under a Run behavior it stays silent. A behavior hearing itself, however far round, is not started and the node says "A behavior cannot listen to itself". - The palette offers every other behavior with an End once more as "On <name>". A node naming one without End says so. - An On node removed while the game runs ends its behavior with On disable and On destroy. The sounds of the entity end only with the behavior placed on it. - Renaming and deleting a declared port follows the edges at On behavior nodes as it does at Run behavior nodes. - The flow outputs of the Start of a behavior placed on an object never fire, like its exec. - The engine prompt of the benchmark names flow ports and On behavior. Tests: - Gate on melektaus-atx right before this commit: 215 files, 3319 tests (3278 + 41), exit 0. - e2e 19 on melektaus-atx: 39 checks (+4), all pass. e2e 1-6,17-24,26,36,51: 628 checks, all pass. - 19 unit tests in flow-ports.test.ts, 19 in on-behavior.test.ts on a real world, the rest in the node catalog. - Four new e2e checks in module 19: a flow port declared by mouse at the End, On Confirm in the graph, the call leaving through the further output while playing, Enter and Space on a real keyboard. - 19 unit counter-probes all fail their tests. One did not at first (a removed node kept its instance), a test was added. Two browser counter-probes fail their checks. - One screenshot looked at: On Confirm with exec and pressed, the second flow pin at the calling node. - The e2e sum of 1680 is counted (1676 + 4), the full suite and the smokes did not run. - Not seen in the browser: flow inputs at the Start, nesting, the ring, values through On behavior, the palette entry. No test holds that the sounds of the entity go on when a heard behavior ends. Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> |
||
|
adminandClaude Opus 5.5
|
38e0f656be |
Split a struct output into one pin per field (#256)
Reading one field of a struct needed its own Expand node, even where the graph already knows the struct type. A split output shows the fields directly on the node, so a Find … Match test becomes a single Equals and the wires keep running left to right. - Right-clicking an output pin offers "Split into <Type> fields" when the type is known and "Split as …" for every other struct asset. The output is replaced by one pin per field with the field's kind. - The type is known for typed struct variables, typed Pack/Expand, fields of another split and item of For each, Find, Match and Item at over a typed list (portSplits.ts). - Right-clicking a field pin offers "Recombine". Splitting drops the edges of the whole output, recombining drops the field edges. One undo step brings them back. - The split is stored as GraphNode.splits and saved with the graph. Copy and paste carry it along. - Field pins follow the struct asset like a typed Expand. A new field gets a pin, a removed field loses pin and edge, a renamed field keeps its edge. Deleting the asset keeps the last fields. The delete dialog counts splits, so it now says "node(s)" instead of "Pack/Expand node(s)". - Renaming a variable carries its split and the field edges along. - At run time the node still produces the whole value. A field pin reads its field like Expand, a missing field reads as empty. - Limits: outputs only, one level, behavior graphs only. Tests: - ./check.sh: 185 files, 2706 tests, CHECK EXIT 0 - e2e GM_STEPS=1-6,54,55: ALL PASSED, 303 checks - New port-splits.test.ts with 12 tests. e2e 6z-vi with 3 checks using a real mouse: split Find.item, wire item.Name into the test and Match.item.Amount into the log (logs 7), recombine. - Counter-checks: without field reads in the interpreter, without rename in the split, without moving edges on rename and without cleanup on field removal one unit test fails each. In the browser, without field reads nothing is logged and without type inference the split entry is missing. - Check total in README: 1520. Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> |
||
|
adminandClaude Opus 5
|
d3563897d8 |
Two compilers that walk a graph the same way walk it through one emitter (#85)
Refactoring round two: the particle and shader compilers share emitGraph.ts (cycle detection, duplicate names, emit order) and keep only their rules. FontLibrary and TextureLibrary sit on FileLibrary (base URL, loading/failed bookkeeping, listeners); SoundLibrary keeps its own contract. The three Create*Command share ImportFileCommand, the three renames share RenameCommand - class names stay. bandBounds() in framing.ts and portNameField() in portSection.ts replace in-file clones, and three comments that told history now state the rule. Co-Authored-By: Claude Opus 5 <noreply@anthropic.com> |
||
|
rootandClaude Opus 5
|
8143130ed2 |
A shared value belongs to no behavior, so it becomes an asset of its own (#91)
game-maker / suite (push) Failing after 8m59s
This reverses the design of the previous commit. `PropertyDef.scope` is gone without replacement: a behavior variable is an object property again, without exception, and sharing is something you point at rather than something you declare twice. A **Variables asset** is declarations and nothing else -- no graph, no position, never placed, no tab of its own (`TAB_OF_ASSET` is already `Partial<>`, so that costs no line). A `Variables` node names one through its new `variablesAsset` setting, empty meaning the behavior's own variables as before, and then reads and writes one value per key for the whole run. Its property list follows the chosen source, which was the actual request: a value another graph declared is now offerable, where before every participant had to declare the name itself. That deletes more than it adds (-72 lines net): `globalConflicts` and its run-stopping kind clash, `SetVariableScopeCommand`, the scope picker, both object-inspector filters and the "shared by the whole run" note on the placed object. A typo is no longer a silent second variable -- naming an asset is picking from a list. And two Variables assets may carry the same key without meeting, because the asset is the key, not the name. The one shape it copies is the one that already existed: `Set state` picks its machine the same way. Lifetime is unchanged. The bag is built at `BehaviorSystem.start()` from the declarations and never written back, so playing in the editor cannot change the project -- which is the whole reason a counter must not be an object property (`World.syncToModel` would `commit()` it, and the coin counter would stand at 7 for good). Full symmetry across that gap, without mirroring anything. Two named wires: `Inspector.liveVariables` shows the values as they stand while a run is on and falls back to the declarations when it ends, and `adoptDeclarations()` takes a key into the run *only where the document changed it since the last sync*. Without that condition any unrelated project edit would snap a running counter back to its starting value; a counter-test bends exactly that and falls over. Nothing was ever cached, incidentally: `GraphInterpreter` only pulse-caches nodes without a `read`, and the variable node has one. The wire was missing. The state machine `Scope` row is now an ordinary `enum` row through `createFieldRow`. It was hand-built from an `HStack` with a ghost dropdown and began ~34px left of every value above it; the explanations beside `Local` and `Global` are gone from the menu, the sentence below the row keeps saying it. Machine scope is otherwise untouched -- `StateMachineAsset.scope`, `SetMachineScopeCommand`, `stateBag()` and its persistence all stand, so #59 stays closed as built and `Scope` as a type now carries machines alone. Six counter-proofs, each biting at its own guard. One of them did not bite at first: the suggestion list was computed twice, in `nodeSection` and `portSection`, so only the browser test covered the request itself. It is one named function now, `variableChoices`, with a unit test of its own. Co-Authored-By: Claude Opus 5 <noreply@anthropic.com> |
||
|
rootandClaude Opus 5
|
58f19a3451 |
Replace the property nodes with one Properties node
Get/Set property, Get/Set properties, Set enabled and Set text are gone. A single Properties node takes a fixed "object" input; every chosen property is an output that reads the current value, and one switched to Set is also an input written when the flow arrives. Exec pins only exist while at least one entry writes. The node carries a type (Sprite, Text, Collider, Camera, Container, Behavior, Any) that decides what "+ Property" offers: the fields of that type, the variables of the chosen behavior, or for Any a kind to pick and a name to type. Each port takes the default and field of its type, so a Camera width starts at 640. Switching the type keeps the ports and marks those the new type lacks. At runtime the type is only an editor aid; the node writes to whatever object it gets. Old project files are converted on load. The type is inferred from the keys: the first object type that has them all, else the one behavior that declares them all, else Any. enabled belongs to every object, so a converted Set enabled lands on Any. The jump-run and tetris seeders use Properties throughout; draw-piece switches its cell on in the same node that sets the colour. Co-Authored-By: Claude Opus 5 <noreply@anthropic.com> |
||
|
rootandClaude Opus 5
|
7c63c884ef |
Replace the five variable nodes with one Variables node
A single node now lists any number of variables. Every entry is an output that reads the current value whenever it is pulled; an entry switched to Set is also an input and is written when the flow arrives. Exec pins only exist while at least one entry writes, and all inputs are read before any write, so one node can swap two variables. Get/Set variable, Get/Set variables and Variable are gone. Old project files are converted on load: each old node becomes a Variables node with the same variables, edges and typed values. A written port without a typed value now shows the zero of its kind on the node body, matching what the inspector shows and what the run writes. Co-Authored-By: Claude Opus 5 <noreply@anthropic.com> |
||
|
rootandClaude Opus 5
|
854ae2e756 |
Add Get/Set properties nodes and a breadcrumb for opened sub-behaviors
Get properties / Set properties work like their variable counterparts:
one port per chosen property, an unconnected input writes its inline
value. A port chosen from the built-in list keeps that property's field
and default (height starts at 100, color is a colour field). "object" is
reserved for the fixed input, checked by the command and on load.
The property picker names the owning type ("Sprite width"), and text
fields can now carry a suggestion list; Get/Set property use it.
Double-clicking a call node shows the path of opened behaviors under the
graph header. Clicking an entry jumps back and trims the path; choosing
a behavior any other way hides it. Reopening a behavior already on the
path steps back to it instead of repeating it. The bar shows before the
graph switches, otherwise it clips the graph that was just fitted.
The "Add node..." header button is gone; nodes come from the context menu.
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
|
||
|
rootandClaude Opus 5
|
8f92a06c84 |
Consolidate duplicated editor code, trim comments, refresh README
Split GraphCanvas (1076 -> 831 lines) into EdgeLayer and graphMenus; the port and marker menus were the same list and are now one function. Value specs of the inspector and the list tab share valueSpecs.ts, and the remaining copies (compound commands, type glyphs, typed asset lookup, name rule, play/editor world setup, marquee) are merged. Four copies had already drifted apart; merging them fixes: - "Disconnect N links" in the port menu is one undo step, not N - "+ Add collider" is hidden on a placed container instance, as in the hierarchy menu, instead of always failing - a bool property coerced from the text "false" becomes false - a port command on an unknown node type reports instead of crashing Comment-only edits leave the bundle byte-identical. README corrected in 35 places (step limit, jump-run clock, suite duration, 409 body, ...). Co-Authored-By: Claude Opus 5 <noreply@anthropic.com> |
||
|
root
|
14f542365e |
Build a Pack or Expand node's ports from a struct variable
The port editor gets 'From variable' next to '+ Field': pick a struct variable of the behavior and its fields land as ports. It only adds - a field the node already declares stays as it is, because it may carry an edge - and the entry is disabled once there is nothing left to add. A list of structs counts too: it declares the shape of every item, which is exactly the bundle a Pack builds for it. A color field arrives as a number port; the graph has no color type. AddPortsCommand is new underneath: adding five ports had to be one undo step, and it checks every key before it appends a single one, so a collision does not leave half the list behind. AddPortCommand is a three-line subclass of it, which leaves its sixteen call sites untouched. |
||
|
rootandClaude Opus 5
|
f60358c951 |
Let a list hold structs, and read or write variables in bundles
A list item may now be a struct. The depth is bounded in the declaration
rather than by a comment: FieldKind (number|text|boolean|color) says what a
struct field holds, ListItemKind adds struct on top and says what a list
holds, so list -> struct -> primitive is the deepest storable shape and
sameValue stays finite. A struct item renders inline in the List tab, which
is why it needs no path in the slot address.
Four paths silently assumed a list item was a primitive: sameValue compared
items with ===, textOf would have printed [object Object], asListItem turned
a struct into text on Set item and Fill, and Index of used indexOf, which is
reference equality and could never have found a struct.
Tetris now runs on bundles. shapes is 112 {x, y} structs instead of 224 loose
numbers, piece and the candidate are structs, so Next move hands back a whole
candidate and each strand packs only the field it changes, since mergeStruct
leaves the rest standing. Declared behavior ports drop 49 -> 35, the master's
variables 18 -> 13, its graph 84/94 -> 69/76 nodes/edges.
Get variables and Set variables declare their ports from a list of variable
names, the way Pack and Expand already do, so one node can read or write
several at once. Renaming a variable rewires them, because there the port key
is the variable name.
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
|
||
|
root
|
b6a609ae24 |
Let a node work out its own ports
Ports that vary per node already existed, but only for the three nested-behavior
types, and the rule for them sat as a switch on type names in nested.ts – the
one place in the project that knew node types by name. It dissolves into two
optional contracts on NodeDef, so a type carries its own rule:
declaresPorts the node holds an editable list, shown as a section in the
inspector – behavior start/end, and now Pack/Expand
derivePorts the node computes them from its settings – Sequence from a
count, Run behavior from the behavior it names
Sequence gains an Outputs setting (2 to 26). Its keys stay a, b, c and count on
with d, e, so the edges of the sequences already out there survive.
A param can now take a port away, and the edge on it would stay: it draws as
nothing yet survives every save, and comes back to life if the port returns.
SetNodeParamCommand takes those edges with it, which also closes the same leak
that switching a Run behavior node's target has always had.
The port editor addresses its node by id rather than by type, so two Pack nodes
can live in one graph, and it calls the rows Fields when they are not a
behavior's signature.
|
||
|
root
|
6702ff8abe |
Let a behavior be a node in another graph
A behavior that has a Start and an End node can now be dropped into any other graph as a node of its own. What is declared on the start node becomes the inputs of that node, what hangs on the end node its outputs; the port list is derived from the sub graph, not copied, so declaring a port in one graph grows the node in the other without touching it. The node carries the behavior's name and the palette lists behaviors by name, so a call is one grab instead of a node plus a dropdown. An embedded behavior has no object and therefore no place for variables: every call starts on the asset defaults and communicates only through its ports. That is the conservative direction - state can still be added later, and shared state already has a home in a behavior object in the scene. Node ids are unique per graph only, so each call gets its own pulse cache; without that, two graphs would collide. Renaming a port used to silently drop the value typed on the calling node. It is carried along now, project wide, like the edges. |