b9d1602b94885040857e3abbc01d525966a1c5ea
4
Commits
| Author | SHA1 | Message | Date | |
|---|---|---|---|---|
  adminandClaude Opus 5.5
|
79a04e6764 |
Edit a Parametric EQ in its node, let the wheel only zoom graphs (#381)
The small curve below the EQ node's rows (#375) only showed the bands. Like the Compressor since #380, the node now shows the editor of its tab between its inputs and its output, and is worked right there. A double-click on the node still opens the same editor in a tab. Two wishes for the nodes with a panel came on top and share the same files, so they are in this commit as well: the numbers below the Compressor's knobs read as plain labels (#382), and the wheel over a node zooms the graph instead of turning a value (#383). #381, the EQ in its node: - EqPanel holds the curve, the band's numbers and the help line, taken out of EqEditor. The tab puts its one panel under a header, each EQ node has a panel of its own at 720 x 360 (EqFace). - A press on the curve neither picks nor moves the node. A double-click on the curve adds a band, one on the title or the edge opens the tab. - In the node a press on the Type or Slope button stays with the button, so the node is not picked or moved. - The spectrum runs in the node while it is in the picture. The tab lets go of the tap once, like the Compressor's, and Editor.tick lets every unseen tab and graph go before any seen one listens. - The count of bands moved from the tab's header into the band row, so the node shows it as well. - The node picture of #375 is gone with its only user: NodePicture, EQ_PICTURE and NodeView's drawing of it. #382, the numbers below the Compressor's knobs in its node: - A Knob with typed: false shows its number as a centred Label without a box, in the panel's ink. The ratio reads 4:1 (ratioText). - The label is as high as its text and sits up in the dial's open bottom, right under the ends of the scale. - Label takes a colour of its own. #383, the wheel in a graph: - GraphCanvas takes the wheel on the way down and stops it there. It zooms over a node too, and no knob or curve in a node sees it. - The tabs keep their wheel: a knob's step, a band's Q and the zoom of the EQ's dB. Found on the way: - A Menu opened below a button in the zoomed graph would have been placed by the button's own height. openBelow now takes the bottom edge as drawn. - The band row did not lay out its labels after a text change when its own size stayed. In the tab a later resize hid it, in the node "Band 1" and the count were missing. The row now lays out itself. - Handle and point positions for the checks were unscaled. They now go through toGlobal and hold at the graph's zoom. Tests: - Unit parametric-eq: 16 tests. The #375 tests now check eqCurvePoints and eqRangeOf directly. compressor-view: ratioText. - e2e 34 (atx): ALL PASSED, 125 checks (3 new: the EQ panel and its ports, editing in the node, the spectrum in the node with the tab open). The Compressor node's check reads its numbers as labels and 8:1. Both node checks now expect the wheel to zoom the graph and leave the ratio, the Q and the dB zoom alone. - The unseen-tab check now leaves for the Scene tab, since the node in the graph listens to the same tap. - Counter-check: the tab letting go of the tap every unseen frame stalls the node's spectrum with the tab open (1 frame against 22, probe on stein2). - Gate (atx): CHECK EXIT 0, 283 files, 4357 tests. Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> |
||
|
adminandClaude Opus 5.5
|
1f2b64fb4c |
Show a Compressor's panel in its node, its tab on a double-click (#380)
The panel of #379 opened in a window of its own and replaced the tab. The user wanted the device in the graph instead, and the tab of #378 back on a double-click. The switch Hardware look goes again. - A node can show a face instead of its rows (`NodeFace`). Its inputs sit on the left of it and its outputs on the right, in the middle of the height. Each side is as wide as its longest port name. - A Compressor node shows the panel at full size, 820x280 graph units. Its settings and numbers are not listed as rows, the panel has them. - The knobs and the lever work in the node. A drag, a notch of the wheel and a double-click are one undo step each. A press on them neither picks nor moves the node, and the wheel does not zoom the graph. The number below a knob is only shown, typing stays in the tab and the inspector. - The meter and the LEDs run while the node is in the picture of a sound FX or instrument graph that is seen. Out of the picture, folded or hidden, the node lets go of its taps. - The window of one size, `fixedSize`, `refit`, `keptSize` and the rule that kept a Compressor out of the tab row are gone again. - A knob's drag as one undo step lives in `nodeParamDrag.ts` now, for the tab and the node. The numbers of a node and what auto-gain says moved to `compressorView.ts`. Found and fixed on the way: - The tab and the node listen to the same taps. The tab let go of them on every frame it was not seen, so the node's meter stood still while the tab was open. Now the tab lets go once, and in a frame everything unseen lets go before anything seen listens. Tests: - Unit: compressor-view (2 new), documents (the test of `keptSize` is gone with it) - e2e 34 (stein2, melektaus-atx was off): ALL PASSED, 122 checks. The four checks of #379 are now four of the node: ports beside the panel, knobs and lever in the node, the needle when played (21.7 dB with the tab open), and the double-click opening the tab. - Gate (stein2): CHECK EXIT 0, 283 files, 4356 tests - Counter-checks: an old auto-gain number read as off turns exactly its unit test red. A tab that lets go on every frame leaves the node's needle at 0 dB and no LED lit (probe on stein2). Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> |
||
|
adminandClaude Opus 5.5
|
2d4909d248 |
Fit the Compressor's tab to any size, make auto-gain a switch (#378)
Two things came up on the new tab. Floated and sized down, it spilled its knobs out of its window, and sized up it left the window empty. Auto-gain lifted far too much: it brought 0 dB back to 0 dB, which at -40 dB, 4:1 and knee 6 is +28.1 dB, so a sound at -24 dB came out at -6 dB. And as a knob from 0 to 1 it blended between makeup and auto-gain, so at 1 the makeup knob did nothing. Layout: - The knobs stay on the bottom line, centred, with the help line above them. - The levels fill the height left above. The curve is a square at their right, centred up and down. It grows with the tab from 180 to 360 px and takes no more than 40 % of its width (picturesLayout). - A floated window cannot be sized below what its pane needs. A pane says so in its minWidth and minHeight, and the Compressor's is every knob and the smallest pictures. Other panes keep 320 x 200. - A pane put into an open window that is too small grows the window. Auto-gain, as decided in #378: - A Compressor's auto-gain gives back what it takes from a sound at -18 dB, so that one comes out as loud as it went in. At the numbers above that is +14.6 dB. - Auto-gain is a switch on the Compressor, the Limiter and the Saturation alike, a setting and no longer an input. The makeup or output is added on top of it instead of being blended with it. - A project from before reads a number as on above 0. Nodes never set keep their defaults: off on the Compressor, on on the other two. - The tab shows the switch at the right of the knobs, with the dB it gives below it. With it on, the curve has a line at -18 dB from the curve up to the diagonal. - Every level reading keeps the gain of its time. Before, the whole picture was read by the current makeup, so after a change the tinting of the last seconds was wrong or missing. Findings: - My first e2e run of the layout clicked Dock where it was before the window was sized up, so the window stayed open and the next check went red. The check reads the button again. Tests: - Gate (melektaus-atx): 282 files, 4344 tests (6 new) - e2e 34 (melektaus-atx): ALL PASSED, 118 checks (2 new) - Offline in Chrome: a sine at -18 dB through -24 dB and 4:1 came out at -17.92 dB with auto-gain on and -22.42 dB with it off. - Counter-checks: the curve set at the top instead of the middle, and every reading read at a gain of 0, each fail exactly their test. - Looked at the window in screenshots: at its least every knob and the switch show. At 1280 x 797 the levels fill the height, the curve is centred at the right and the knobs are at the bottom. Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> |
||
|
adminandClaude Opus 5.5
|
1df38bd430 |
Edit a Compressor in a tab of its own, with knobs and levels (#378)
A Compressor had only its number rows in the node. Its numbers are
easier to set by feel on a dial, and what it does is easier to judge
when the level going in and the level going out are seen side by side.
- Knob is a new widget in the toolkit: a slider bent into a circle,
its name above and a number field below. A drag up or down turns
it, Shift a tenth as far, a notch of the wheel a fiftieth of the
turn, a double-click sets the default, the number takes a typed
value. A taper gives the low end more of the turn.
- The Compressor's tab opens on a double-click, one per node, like
the Parametric EQ's. It has a knob for each of the seven numbers,
greyed while its input is linked.
- Its curve shows level in to level out from -60 to 0 dB. The point
where it bends sets the threshold, the end of the curve sets the
ratio that ends there.
- Its levels show the last 4 s on both sides of the node. Where it
takes more than 0.5 dB away, the stretch below the level coming in
is tinted. The makeup is left out of that.
- The Compressor is tapped like the EQ. SpectrumTaps listens to more
than one node at once and reads the loudest sample of the last
25 ms on each side.
- The node tabs share one map in the editor (nodeTabs), so a third
kind needs no new plumbing.
Findings:
- CI task 614 for
|