c9e8a3f6ac06a540a18b3857666020fdb511a160
3
Commits
| Author | SHA1 | Message | Date | |
|---|---|---|---|---|
  adminandClaude Opus 5.5
|
daeffe0f9d |
Route the tracks of a song through a graph (#350)
Every track of a song went straight into its output. Now the Song tab has a second view, Routing: a graph with a node per track and one Output, the links between them sends. A track can go into other tracks, into several at once, and a link has its own volume and the point of the track it taps. - The song asset has a graph like an instrument (SongTrack, SongOutput). heldSongGraph keeps it in step with the tracks on load and in SetSongCommand: a node per track named after it, one output, a new track and every track of an old song linked to the output. Links of gone tracks, doubled links and links closing a loop are dropped. - A link carries an optional send (volume in dB, tap). The inspector shows Volume and Mode for a picked link of a song: Post volume (Post pan), Pre volume (Post FX), Pre volume (Pre FX). SetSendCommand. - NodeDef has two new flags. `fixed` nodes are never added or deleted by hand. Links between `acyclic` nodes may not close a loop, checked in canConnect, dropTargetPort and ConnectCommand. - songBuses gives each track its sends instead of one `into`, and a bus `song:<song>:<track>:#items` for its own items. That bus is what solo closes on a track that only passes a soloed one on. - Mute and solo now act on the sends (trackGates). A muted track passes nothing on, on any tap. A soloed track is heard with what goes into it, through the tracks it goes through, their own items silent. Only sends on a way through a soloed track stay open, so a track going into it and into the output is heard through it only. - SoundLibrary: a bus has either `into` or sends. Each send is tap, delay, level, target. busLatency takes the latest way (arrivalOf), and each send is held back so all ways of a track arrive together (sendDelays). Taps are wired again whenever a chain comes or goes. - The Song tab has Timeline and Routing in its header. The routing uses GraphCanvas with an empty palette. A track linked nowhere shows "Goes nowhere". Delete takes links, never a track node. - Game playings route the same way, the output being the master of the playing. Decided without asking: a send ranges -60 to +12 dB like a track, default 0 dB Post. Mute closes the sends, the track's own level stays. Found on the way: the inspector built the Mode row with the send as it was when the rows were made. Setting Volume and then Mode wrote the old volume back. Both rows now read the current send when they change. Tests: - Unit song-routing (new): 13 green. Sound library: 4 new, 94 green. 11 counter-probes (loop on load, canConnect, solo, solo past the soloed track, mute, preFx latency, graph sync, delete guard, delays, taps, glide), each red. - Existing tests adjusted to the new bus names and send shape: song, bus-fx, song-play, graph registry, edge description. - e2e 65 on melektaus-atx: ALL PASSED, 43 checks (5 new). The first run caught the inspector bug. Counter-probe with the old closure: 2 FAILED. - Gate on melektaus-atx: typecheck, lint, format clean, 2 tests red (registry rule, edge shape), fixed and rerun locally: 56 green. - Not rerun after the per-send solo fix: e2e 65 and the gate. Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> |
||
|
adminandClaude Opus 5.5
|
9c71eb1a0d |
Shape notes with an Envelope and move numbers with its curve #335
Without an envelope a note set in hard and broke off 10 ms after its end. An instrument now has an Envelope node with attack, decay, sustain and release. On the way of the sound it is the volume. Its output "value" moves a number of the note with the same curve, from "From" to "To", for a filter sweep among others. A new Filter node gives that sweep something to move. - Envelope (instrument only): attack a straight line, decay and release ease out and are 60 dB of the way at their time. A release takes 10 ms at least. Defaults 0.005 / 0.1 / 1 / 0.1. - The end of a note goes to the Envelope instead of the 10 ms fade. A Gate or Loop Sample under it plays on through the release, "Loop, then release" leaves its loop too, and the voice ends with the release. A One-shot under an Envelope of its own plays through. - A note ending before attack and decay releases from the level it has reached. Chrome holds it with cancelAndHoldAtTime, Firefox gets the level worked out from the shape. - New port type "envelope" (coral). It fits only a number input that says it can follow one (PortDef.followsEnvelope): Filter cutoff and resonance, Pitch, Gain, the EQ bands and Mix. Not the Delay, not the Envelope's own numbers. portsMeet() decides it for ConnectCommand, the drag and the drawn edges. - On the audio thread every Envelope of a note is one ConstantSourceNode. A number it moves gets the curve through a WaveShaper, in equal ratios for a cutoff and a gain. A number an Envelope moves is no longer reached by a parameter. - Filter (sound FX and instrument): low-, high- or band-pass, cutoff in Hz, resonance 0 to 1 as a Q. A low- or high-pass is flat at 0 and rises 20 dB at 1, a band-pass goes from Q 0.7 to 20. - Stop sound with "let ring" lets a note with an Envelope fall away in its release. Without it, and with Stop in the tab, it is cut. - The same note again during a release is a voice of its own. - The Envelope's numbers are set when the note starts. They can come from velocity or a parameter, later changes do not bend the note. Tests: - envelope.test.ts (new, 12): curve, ratios, Filter Q, compiling an Envelope, its value into each number, a Delay refused - sound-library +7: attack and decay on the clock, release from the level reached, One-shot held, Stop sound with and without let ring, a cutoff and a pitch moved by the curve - e2e 34: ALL PASSED, 50 checks (+2). Offline in Chrome the curve rendered 0.5 / 1 / 0.5005 at 0.05 / 0.1 / 0.3 s, released at 0.5 s it was 0.0158 at 0.65 s and 0.0005 at 0.8 s, released mid-attack it fell from 0.5 to 0.05 in 0.1 s. A Gain moved 0.25 to 1 was 0.5 halfway. A looped note of 0.2 s with a release of 1 s was gone after 1.32 s. - Five counter-checks (release end, One-shot hold, the follows check, ratios, pitch sum) failed 3, 1, 1, 2 and 2 tests. - Gate on melektaus-atx: CHECK EXIT 0, 245 files, 3812 tests Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> |
||
|
adminandClaude Opus 5.5
|
b830f9c747 |
Split wiring, drags and the frame layer out of GraphCanvas (#215)
GraphCanvas had grown to 1406 lines. Wiring, dragging and the frame
views each carry their own state, so they now live in their own
classes behind a narrow host interface. Behaviour is unchanged.
- GraphCanvasHost is what the new classes see of the canvas.
- Wiring owns dragging a pin, the palette on a drop into empty space
and "Make transition".
- GraphDrags owns moving nodes and frames, including snapping.
- AnnotationLayer holds the frame views. The test hooks stay on the
canvas and read the views through the layer.
- BeadClock moves into beads.ts and can now be tested without a
browser.
- The canvas builds host, wiring and drags in its constructor because
state is a parameter property and not set during field init.
- GraphCanvas is down to 1019 lines.
Tests:
- ./check.sh: 145 files, 2192 tests, CHECK EXIT 0 (+2 for BeadClock)
- e2e 1-28,31,36: ALL PASSED, 932 checks
- New e2e check in 36k: a frame caught by the rubber band is also
drawn as selected. No check covered that before. Against a bent
build it fails with selected: false.
- Counter-checks for drop target, snapping and beads fail exactly
the expected checks.
- Editor check sum is now 1314 (CI measured 1313 at
|