A sound could only be played as it was uploaded. A Sound FX asset is
a node graph like a shader: Input, effects, Output. Play sound has a
new input fx that sends the voice through it.
- New asset type soundfx ("Sound FX"), not placeable, with a graph
and its own tab. The heading in the asset panel is "Sound effects",
so it does not take the click meant for the + menu entry.
- Nodes in core/soundfx/nodes.ts, category sound, port type audio
that only fits audio: Input, Output, Gain (dB), Pitch (semitones),
EQ (80 Hz and 12 kHz shelves, peaks at 250 Hz, 1 kHz and 4 kHz).
- compileSoundFx walks back from the Output with the shared graph
emitter. An input takes one edge, so the result is one line: a
pitch and a list of gain and filter stages. A node without input
or a graph without Output reports a problem on the node.
- Pitch is the playback rate of the source. It applies to the whole
sound and also changes its length, the node description says so.
- The BehaviorSystem resolves fx and hands the line to the AudioSink.
An fx that is missing or does not compile plays the sound dry.
- SoundLibrary wires source, stages, volume, destination in that
order. stats().last now also names pitch and stage count.
- The tab header picks one of the project's sounds and plays it
through the graph as it stands. Stop there ends only its own voice.
Tests:
- soundfx.test.ts (new, 11), sound-library (9, +2 for the wiring),
node-catalog (+1 for fx), graph and asset-groups adjusted
- e2e 34: ALL PASSED - 26 checks (+5: + menu opens the tab, palette,
2 effects, tab Play and game Play through the FX at -12 st)
- Gate on melektaus-atx: typecheck, lint, prettier clean, 239 of 240
test files green. The red one was sound-library (its fake
AudioContext had no playbackRate), fixed afterwards, gate not
re-run in full.
- Counter-check: without the audio rule in portsCompatible the port
test fails.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
A tile could be solid, one-way and scaled, but not report without
blocking. Water, lava, spikes or a goal zone needed a trigger object
of their own laid over the map. Now a tile has a switch Trigger, and
the collision events name the tile and the cell they met.
- A tile has the switch "Trigger (reports, never blocks)" under
Solid. Its cells hold nothing up: no Move, no falling body, no
ray. They raise On collision enter, stay and exit with the tilemap
as other.
- The three events have the outputs tile, cell x and cell y. Without
a tile, tile is empty and the cell is -1, -1.
- The three events have the input per cell. Off, the default, gives
one event per area: cells of the same tile that touch side by
side. On gives one event per cell.
- The scene view outlines trigger cells in yellow like a trigger
collider, merged to rectangles but never with solid cells.
- Is touching with the map counts trigger tiles, and Set tile works
while the game runs.
- Both systems find the touches with the same overlap check in
runtime/systems/tileTriggers.ts, not through the physics engine.
Decided here:
- Trigger wins over Solid. A tile with both does not block, as with
a collider.
- Water beside lava is two areas, and so are two ponds that touch
only at a corner.
- An area names the cell nearest to the centre of the collider, and
on exit the cell it named last.
- The solid cells of a map still do not name their tile.
- Normal, impulse and point are 0, as with a trigger collider.
- Collision scale and outlines shape a trigger cell like a solid
one. One-way, friction and bounciness have no effect.
Tests:
- Gate on stein2: 205 files, 3104 tests (3067 + 37), exit 0
- e2e 39,40: 106 checks. e2e 1-8,39-43: 490 checks. Both on
melektaus-atx. No full run, the sum of 1648 (1645 + 3) is
reckoned and CI measures it.
- 37 unit tests in tests/core/tile-triggers.test.ts, nearly all
against both systems
- Three e2e checks with a real mouse in block 40l-iv
- 24 unit counter-probes fail tests. Two did not at first, tests
were added for them.
- Two browser counter-probes fail their checks
- Two screenshots looked at (yellow outline, the node with per cell)
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Recurring cleanup round over the code since round 6 (056a622), 105
commits. Behaviour is unchanged. Duplicated code in src went from 29
clones with 229 lines (0.32 %) to 14 clones with 109 lines (0.15 %),
measured with jscpd and the same settings as round 6.
- BehaviorSystem.ts shrinks from 941 to 589 lines. Collecting the
pulses (keys, timers, collisions, animations) moved to
behaviorPulses.ts. The NodeContext the nodes receive moved to
behaviorContext.ts. Imports from outside stay the same, TimeScaled
is still exported from BehaviorSystem.ts.
- PointKindButton and drawPointGrip replace the "Point:" button with
its menu and the point and handle drawing that the curve and the
vector art tab each had on their own.
- lerpVec, cubicAt and splitCubic in src/core/util/vec.ts replace four
copies of the cubic curve and two de Casteljau splits.
- mapNested in Properties.ts is the one walk over lists and structs
that liveObjects and objectRefs did separately. withFieldRenamed
and withoutField replace three copies of renaming a struct field
and two of removing one.
- jsonBody and staleRevision build the JSON body and turn a 409 into
StaleRevisionError for all stores. The auth store turns a 401 into
its error in one place.
- Smaller helpers: structAssetFrom for the two "Make struct type"
commands, shownObject in the inspector, selectedItem for the size
gizmo and the polygon corners, solidTiles in the tilemap collision,
requireVariablesAsset and requireBehaviorVariable.
- Left as is on purpose: the plain forwarding from the collision and
physics systems to Solids, the pointer wiring of the canvases and
the identical last lines of the two make commands.
- Removed unused code: tilemapTileIds and tilemapsUsing were never
called since #128 and #131. EditorState.runtimeProject became unused
with GameRun in #266. The assetId getter of the make commands was
read only by a test.
- 60 values used only in their own file lost their export. The shader
and particle node catalogues stay exported as in round 6.
- Five comments that told history now describe the current state. The
doc comment of BehaviorSystem sits on the class again.
- README lists the struct, clip area and curve assets and mentions the
game link from #266.
Findings:
- Deleting a tile that is painted on a tilemap leaves its cells in
place, and they draw nothing. The delete dialog does not mention the
tilemaps. That was probably the job of the unused tilemapsUsing.
Left as is, because fixing it changes behaviour.
- The solid filter for tile surfaces was untested. A bent filter
stayed green. A new test in tests/core/surface.test.ts now fails
against it.
Tests:
- ./check.sh: 195 files, 2815 tests, exit 0 (one test removed with
tilemapsUsing, one added for tile surfaces).
- Full e2e run: ALL PASSED, 1580 checks.
- Smokes jumprun, tetris, actor: 24, 19 and 21 checks, all passed.
The example project files were restored byte for byte afterwards.
- Counter-checks, 12, all fail as expected: 10 in unit tests (among
them mapNested, splitCubic, cubicAt, staleRevision, the stay pulse,
the late timer and the time scale), 2 in the browser (Point button
always enabled fails 47, selectedItem without a hit fails 29).
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
An asset could only be picked as a setting on the Spawn node. It could
not be wired in, held in a variable or put into a list. Finding an
object below the own one needed a scene-wide search by name.
- "Asset" is now a kind like Animation or Sound: port, variable, list
item and a new "Asset" literal node, with its own cube icon.
- Spawn and Is asset have an `asset` input. It uses the key of the old
setting, so a saved asset reads as the value of the input and older
projects keep spawning without a migration.
- New node "Child by name" searches below an object level by level.
A child wins over a grandchild of the same name. Nothing found or no
object gives null.
Tests:
- ./check.sh: 168 files, 2453 tests, CHECK EXIT 0.
- 9 new unit tests in tests/core/asset-kind.test.ts, catalog cases for
Spawn, Is asset, Child by name and the literal.
- e2e 6z-ii (2 checks): node rows and a real drag of the literal onto
`asset`. e2e 6: 119 checks passed. Spawn checks in 3 and 9 passed.
- Counter-checks: depth-first search fails 1, Spawn reading only the
old setting fails 3, runtime ignoring the parent fails 1.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Sounds follow the road fonts already paved: the file goes to the server
content-addressed under its sha256, the project keeps a named asset that
points at it, and nothing is ever re-encoded. The format is read from the
file's own signature, not from what the browser claims - the same .m4a
arrives as audio/mp4, audio/x-m4a or as nothing at all.
Playing is two nodes. "Play sound" takes the asset and may raise or lower
its volume; every call is its own voice, so two jumps in a row are two
jumps heard. Its loop input is a choice of three - from the asset, on,
off - because a checkbox has to spend one of its two positions on "not
set" and would lose a case: an asset that loops could then never be
played once.
Below the graph core stays browser-free: NodeContext hands out an asset
id, BehaviorSystem resolves it against the project and folds the asset's
own volume and loop into the call, and only viewport/SoundLibrary knows
about Web Audio. A run without a sink plays nothing instead of throwing.
The CI browser is muted, so the ear is no witness: the debug hook counts
started and stopped voices, and step 34 reads that counter.
- `Texture` and `Color` can be picked as a variable kind, a struct field
kind and a declared port kind; a new `Texture` node hands a picture id
into the graph. Declared, a texture is its bare id – the `$texture` tag
stays a list-only thing.
- The `String` node is labelled "Text" like its kind; the type id stays.
- Whole-number inputs (`Item at`, `Set item`, `Sub list`, `Fill`,
`Repeat`, `Substring`, `To text`) show no decimals (`int()` in shared.ts).
- All server projects are reseeded, so `legacyNodes.ts`,
`migrateDeclaredLists` and the `ownerId` fallback go, with their tests.
- Note `reseed-because-of-list` moved to done/; new note `refactor-types`.
Co-Authored-By: Claude Fable 5.1 <noreply@anthropic.com>
Get/Set property, Get/Set properties, Set enabled and Set text are gone.
A single Properties node takes a fixed "object" input; every chosen
property is an output that reads the current value, and one switched to
Set is also an input written when the flow arrives. Exec pins only exist
while at least one entry writes.
The node carries a type (Sprite, Text, Collider, Camera, Container,
Behavior, Any) that decides what "+ Property" offers: the fields of that
type, the variables of the chosen behavior, or for Any a kind to pick
and a name to type. Each port takes the default and field of its type,
so a Camera width starts at 640. Switching the type keeps the ports and
marks those the new type lacks. At runtime the type is only an editor
aid; the node writes to whatever object it gets.
Old project files are converted on load. The type is inferred from the
keys: the first object type that has them all, else the one behavior
that declares them all, else Any. enabled belongs to every object, so a
converted Set enabled lands on Any.
The jump-run and tetris seeders use Properties throughout; draw-piece
switches its cell on in the same node that sets the colour.
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
A single node now lists any number of variables. Every entry is an output
that reads the current value whenever it is pulled; an entry switched to
Set is also an input and is written when the flow arrives. Exec pins only
exist while at least one entry writes, and all inputs are read before any
write, so one node can swap two variables.
Get/Set variable, Get/Set variables and Variable are gone. Old project
files are converted on load: each old node becomes a Variables node with
the same variables, edges and typed values.
A written port without a typed value now shows the zero of its kind on
the node body, matching what the inspector shows and what the run writes.
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
Get properties / Set properties work like their variable counterparts:
one port per chosen property, an unconnected input writes its inline
value. A port chosen from the built-in list keeps that property's field
and default (height starts at 100, color is a colour field). "object" is
reserved for the fixed input, checked by the command and on load.
The property picker names the owning type ("Sprite width"), and text
fields can now carry a suggestion list; Get/Set property use it.
Double-clicking a call node shows the path of opened behaviors under the
graph header. Clicking an entry jumps back and trims the path; choosing
a behavior any other way hides it. Reopening a behavior already on the
path steps back to it instead of repeating it. The bar shows before the
graph switches, otherwise it clips the graph that was just fitted.
The "Add node..." header button is gone; nodes come from the context menu.
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
Get/Set variable nodes now title themselves "Get <name>" / "Set <name>", and
the new Variable node just "<name>"; the title is the same folded or open,
and a collapsed node shrinks to it. The redundant "Variable: <name>" row is
gone unless the variable was deleted ("<name>?" is the only hint then).
The Variable node sets its value when an exec flow arrives and exposes the
value at any time. Its output is read when a downstream node pulls it, not
frozen at the write, so count = count + 1 is one Variable node plus an Add.
Get variable keeps reading once per pulse: switching it would change the
behaviour of existing games.
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
PropertyValue was number | string | boolean | list. A struct joins it, which
costs two things the typechecker found rather than I did.
An object on a data edge used to mean a live entity, so asEntity would have
taken a struct for one and asString would have read .name off it. EntityHandle
now carries a symbol brand – a symbol so no field name can impersonate it, and
it never serializes, which suits a thing that exists only while the game runs.
It is built in exactly one place.
String(value) would have written a struct as [object Object] at 39 call sites.
They go through textOf(), which is identical for primitives.
normalizeGraph dropped everything but primitives from node params, so the List
node lost its value on every save ([3,1,4] round-tripped to undefined).
Variables were spared: they have a schema, params have none.
objectSection.ts had grown to 559 lines around three separable parts: the
queries, the vector rows and the parent row. Four object commands repeated the
same capture/restore preamble – applyCommands stays out, its five carry extra
undo state whose restore order matters.
58 dashed banner comments are gone. The nine labels in nodes/index.ts stay:
they are the only structure a flat 90-entry array has.
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
A variable could only be a number, a text or a yes/no, so every set of values had
to be smuggled through a string - which is where Tetris got its unreadable
"03066326048763714" colours from. A list is now a value of its own, with an item
kind (number, text, yes/no, colour) that decides how the inspector reads the one
comma-separated line it is typed as, and eight nodes to work with: List, Fill,
Count, Item at, Set item, Sub list, Join lists, Index of.
Two traps came with it. An array is typeof 'object', so every place that told a
value from an entity had to learn the difference, or a list would have been
passed around as a game object. And a value was compared by identity in three
places - with lists that marks everything as an overridden property after each
reload, so those comparisons now compare contents.
There is no list of objects: a list is written to the project file and an object
is a live handle that no reload survives. A set of objects stays a list of names.
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
Remove comments that only restate the code, keeping the section banners
and the notes that carry a reason, a measured fact or an external
contract.
ButtonOptions.width claimed to be a fixed width but only set minWidth,
so the Graph and Texture pickers grew with the name they showed. It is
now what it promises, with a separate minWidth for the buttons that have
two forms. Narrow buttons shrink their padding, otherwise a 24px icon
button had 8px left for its glyph and truncate dropped it entirely.
__gm.labelsDropped() guards that class: the overflow guard only saw text
that was too wide, never a label truncated to nothing.
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
Images are uploaded to a content-addressed blob endpoint and stored as
data/textures/<sha256>.<ext>; the project only keeps the file name. The
sprite points at a texture asset through an ordinary property of the new
kind `asset`, so instance overrides, "Apply to container", "Reset to
asset", undo and `Set property` work without any extra code. The new kind
also replaces the ad-hoc asset picker the graph nodes faked as an enum.
Import goes through + -> Texture, drag & drop onto the canvas or Ctrl+V.
Images wider than 2048px are downscaled client-side and re-encoded to
WebP if needed, because nginx caps uploads at 1MB; an image that already
fits is uploaded byte for byte so pixel art is never resampled.
The sprite colour default changes from red to white, since colour tints
the texture multiplicatively and a tint of white shows an image as it is.
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
Tooling:
- Prettier as the single formatting authority (110 columns, single quotes,
measured against the existing style); Markdown excluded because table-cell
padding turns the README glossary into 1000-character lines.
- Type-aware ESLint ending in eslint-config-prettier, so a rule always means
"this is a bug", never "this looks different".
- .editorconfig and an `npm run check` that runs typecheck, lint, format and
tests in one go.
Findings fixed on the first run: three more duplicate imports, four
String(unknown) calls (parameter types narrowed instead of casts), two dead
initialisers, two redundant casts, a console.log for a real error. Two
warnings were false here and are disabled with a reason in place.
Tests 132 -> 269:
- node-catalog.test.ts covers every node with a run(), with a guard that fails
when a new node has no row.
- behavior-events.test.ts covers the ten event nodes through a running World,
checking timing rather than existence.
- Input's state machine (press/release/releaseAll) is reachable without DOM
events now; the DOM handlers are thin adapters.
Compare fell back to == without a configured operator although the schema
default is <; aligned.
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
adminandClaude Opus 5.5