f03ca0d382f8002b438158f6b24e7f5ed65d83fd
12
Commits
| Author | SHA1 | Message | Date | |
|---|---|---|---|---|
  adminandClaude Opus 5.5
|
f03ca0d382 |
Draw a shader in passes with a Pass node (#301)
A Blur stops at radius 8 in one pass, and bloom needs a softened copy of the picture beside the original. A Pass node cuts the graph: what feeds it is drawn into a picture of its own first, and the nodes that read a picture read that one when it feeds them. - Pass has color and alpha like the Output, a Resolution setting (Full, Half, Quarter) and a picture output. Texture color, Texture alpha, Sample texture, Blur and Texture size get a picture input. Unconnected it is the wearer's own picture, so the original stays readable beside any pass. - picture is a port type of its own. It plugs only into a picture input, not even into an any port. - The walk shared by the compilers can stop at a node (cut). The shader compiler draws each Pass it meets as a fragment of its own, earlier passes first. A ring through a picture says Feeds itself, and more than 8 passes say so at the node. - A pass draws untinted. The tint comes on when the last part reads a picture, so a particle source draws its passes once for all of its particles (user decision). - A pass's picture is the wearer's picture and its Padding, at the pixels of the picture times Resolution, at most 2048 per side. It is read with the picture's own filter and continues past its frame as the Output's Edge says. - PassPictures keeps one render texture per pass and wearer. It draws again only when picture, size, Padding or a uniform changed. A field's picture is a render texture that changes under the same id, so a field draws its passes every time. - Sprite, sliced sprite, text, particle source, field shader and the Shader tab's preview all draw passes. syncShader takes a fixed picture for a 9-slice, which holds its corners but keeps the margin. - texelAt and blur take the sampler they read. Existing shaders compile to the same program apart from that argument. - A field shader's Blur and Texture size count a pixel as a unit of the frame (uPixelScale), not of the screen. Before, a field's blur grew when zooming out and shrank when zooming in. This came with #170 and #300 and is fixed here because passes inherit it. - tools/perf-shaders.mjs and tools/perf-field-shaders.mjs measure two passes with GM_PERF_PASSES=1 and GM_PERF_PASS_RESOLUTION. Below Full an open Pass shrinks the picture first, as the wiki's recipe does. Found on the way: - Destroying the pictures before the shader made Pixi warn that a texture was still bound. The shader goes first now, and a picture of a new size is resized rather than replaced. - Two passes in a row could draw plain white the first time. Pixi builds the code that binds a program's resources once and finds them by position. A pass of one graph is often the same program as a pass of another with fewer slots, so it bound a placeholder. Every shader now declares all 8 pass slots and its uniform group. Tests: - Gate on melektaus-atx: 225 files, 3480 tests (3467 + 13), exit 0. - e2e 28 and 31 on melektaus-atx: 97 checks (94 + 3) and 44 checks (43 + 1), all passed, no Pixi warning in the console. - 28l-vii: a Blur across, a Pass and a Blur down draw the 5x5 spot of a Blur of Both (difference 0.000). On a grey sprite a pass's picture added to the original is 231/60/60, each tinted once. Two Passes in a row after a graph with one show red and green, not white. - 31v-iii: a Blur of 8 fades a field's frame edge over 8.0 units at 50 % and at 200 % zoom. - Counter-checks: a tinted pass fails 1 unit test. Pictures never bound fail both e2e checks (spot 0.20 instead of 0.04, 243/158/158). Pass slots by the number of passes draw #ffffff, and a field without its pixel scale ramps over 16 and 4 units: exactly the two new checks fail. - e2e sum 1716 is counted, not yet measured (1712 + 4). - Measured on stein2 (HD 630, one run per row): 50 field shaders at radius 8 go from 11.4 to 41.3 fps in two passes, 44.4 at radius 16 (three passes at Half). 800 sprites at radius 8 go from 13.9 to 24.5 fps. At radius 4 one pass stays faster from 400 sprites on. Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> |
||
|
adminandClaude Opus 5.5
|
d6d38a6422 |
Lay a shader over a particle source's whole field (#170)
A shader on a source runs per particle and stops at each quad, so a glow or blur across the whole cloud was not possible. A source now has a second shader row that is laid over everything it draws at once. - New rows Field shader, Field width and Field height (256) on a particle source. The size rows show only while a field shader is picked (new `shownWhenSet` on a row definition). - The particles are drawn into a RenderTexture of the frame, and a sprite mesh wearing the field shader draws that picture. The frame is centred on the source and turns and grows with it. - UV run 0 to 1 across the frame. Texture color, Texture alpha and Sample texture read the picture of the particles. - The picture has as many device pixels as the frame covers on screen, at most 2048 per side. A frame off screen draws no pass. - The field shader's Padding and Vertex output do nothing: the frame is the edge, and its corners stay put as on a nine-sliced sprite. - A name both shaders declare is one row, and both uniforms read it. - The scene view draws the frame dashed round a selected source. The Particles tab preview wears the field shader too. - `tools/perf-field-shaders.mjs` measures 1, 10 and 50 sources. On the HD 630 they ran at 60.0, 60.0 and 57.6 fps against 60.1, 60.0 and 59.2 without, one run per row. Tests: - Gate: 223 files, 3460 tests (3452 + 8), CHECK EXIT 0. - e2e 31: 43 checks, 3 of them new. Sum 1707 is computed (1704 + 3). Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> |
||
|
adminandClaude Opus 5.5
|
e933fad446 |
Give a shader room to draw around the picture it wears (#69)
A shader ran only inside the rectangle of what wears it: the quad has the size of the sprite, and outside of it no fragment runs. An outline or a glow built with Sample texture was cut off at the border. The issue still spoke of Filter.padding, but since #77 the shader is no filter any more, the limit is the geometry. - The Output node has a number Padding next to Edge: so many pixels of the picture per side the wearer draws beyond it. 0 is the default and draws as before, 256 is the most. - The quad grows and its UVs grow with it, so the picture keeps its place and size. In the margin the UVs run on below 0 and above 1. - Transparent is a fourth Edge mode: outside of the picture there is nothing. It is cut in the fragment (texelAt), so it needs no copy of the picture with an address mode of its own. - Edge holds everywhere alike, also for Texture color, Texture alpha and unconnected inputs. - Padding above 0 with Edge on Clamp puts the hint "Padding with Clamp smears the border" on the Output. The shader still compiles. A chosen Clamp and the default cannot be told apart. - All four wearers draw the margin. A sprite counts in pixels of its frame, a text in its units, a particle source grows every particle about its centre. - A nine-slice sprite gets a ring around its nine fields, as wide as so many border pixels. The fields themselves stay. - Without a picture a pixel is one unit of the wearer's own size, or of the particle size. - Particles now take the Edge mode of their shader. It had no effect on them before. - An object wearing a padded shader is never culled, or its margin would vanish at the edge of the screen. - The preview in the shader tab shows the margin and leaves room for it. - Picking, the selection frame, the size and the collider stay with the rectangle without the margin. Tests: - Gate on melektaus-atx right before this commit: 216 files, 3336 tests (3319 + 17), exit 0. - e2e 28,30,31,37,41 on melektaus-atx: 178 checks, all pass. e2e 1-37,47,48,58 ran before the last change (no culling with padding): 1281 checks, all pass. - 17 new unit tests: the compiler (padding, Transparent, the hint) and the geometry (quad, nine-slice ring). - Seven new e2e checks: four at the sprite in module 28, one each for text, particles and nine-slice. - 17 unit counter-probes all fail their tests. Three browser counter-probes fail their checks (5, 3 and 1 of them). - Three screenshots looked at: the sprite with Clamp and margin in the scene, the preview in the shader tab, the text. - The e2e sum of 1687 is counted (1680 + 7), the full suite and the smokes did not run. - Not seen: the hint at the node in a picture, particles and nine-slice in a picture, the game view while playing, sprites without a picture, vector and pixel art pictures. Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> |
||
|
adminandClaude Opus 5.5
|
cb32b4bc23 |
Draw scene symbols as white panel icons that make room for each other
The scene view drew its symbols from its own SVGs, each in a type colour and some on a plate. They looked heavier than the panel icons and were hard to read on busy ground. Symbols of different objects also sat on top of each other whenever their positions met. - Every symbol is now the panel icon of its kind, one file for both places. The scene-only SVGs in src/viewport/icons are gone. - Symbols are white in a thin dark outline with no plate behind them. haloSvg widens each shape of the file by its own stroke and draws that silhouette dark under the icon, so no second file is needed. - A butt stroke end would leave its end without outline. The halo caps such strokes square, and the rigidbody arrow shaft is now a filled rect so its top edge is outlined exactly. - Symbols are 18 world units across, stay upright and are clickable. A click selects the object, a drag moves it. - symbolLayout places every symbol on its object's position. Symbols that overlap stand on a ring round the middle of their positions, evenly spaced one icon apart. A ring that reaches into another symbol takes it in until nothing overlaps. Ownership plays no part. - Names sit beside their symbol, on the outside of a ring. Selection frames and parent links follow the symbol. - A collider icon no longer shows trigger or invalid state. The outline colour of the shape still does. - A lone collider sits on its sprite's middle again. A press there on an unselected sprite drags the collider, so e2e 02 and 16 now grab the sprite beside its middle. Hook __gm.container.objectRect helps 16 find that spot. Tests: - check.sh: 2245 tests, CHECK EXIT 0 (+8 for layout and halo) - e2e 1-16,31,39-43: 670 PASS, 2 FAIL. Both were sampling too strictly for the thinner, smaller icons. 5c looked for the exact outline colour, which the thin outline only reaches blended at this zoom. 31n started the ring scan one pixel past the smaller ring. Both are fixed, and e2e 5,31 then passed with 48 checks. - 5c checks white with an outline and none of the old colours, 41b checks the ring positions and that a click on a symbol selects its object, 31n checks the now white particle ring. - Counter-checks: without the halo only 5c fails, also with the looser outline match. Without the layout the ring and click checks in 41b fail. Originals restored by cmp. - The e2e check total stays 1351. Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> |
||
|
admin
|
7e5003b590 |
A test that waits for a deadline somebody guessed is waiting for the wrong thing, so it waits for the editor (#93)
game-maker / suite (push) Successful in 6m48s
The suite spent 88% of its step time asleep: 564 s of steps, 496 s of
them in sleep(n) - fixed spans estimated by hand and then copied from
step to step. That is why it was slow, and why it flickered.
The signal is afterFrames(count, timeout) in ui/render.ts, exposed as
__gm.afterFrames(). It wakes the loop itself, because an editor that
draws nothing would never redeem a promise of a frame, and it gives up
after a timeout instead of hanging the run. settle() in the harness
waits two drawn frames (~32 ms) instead of 150-300 ms and falls back to
sleep(150) when the hook is missing (an old build): silently not
waiting would make every later check a coin toss.
Every action goes through it now - click, doubleClick, wheel, drag,
dragAsset, press, typeText, select, mutate, undo, redo - and with that
about 550 sleep() calls behind those actions became redundant, helpers
that are nothing but a mutate in a coat included. What a frame cannot
answer got its own condition instead: waitUntil(expr), play()/stop()
waiting on __gm.state.mode rather than on 300 ms, saved() for the
autosave (the two hand-written polling loops sampled at 300 ms for
something that arrives after a second), and showTab() as a real tool -
47 places called evaluate("__gm.showTab(...)") raw, and 24 of them
waited for nothing at all and read the old panel.
564 s -> 243 s of step time, the waiting share 88% -> 76%. Three kinds
of wait were kept, and each one bit when it was taken away: loading
bytes (textures, fonts), game time that a repaint cannot stand in for
(time scale, shader and particle clocks, the live values a running
graph carries), and the inertia the scroll step measures on purpose.
Two things the new speed uncovered, both real: 25-animation read the
frame menu unfiltered and had frozen an incomplete list (the CI failure
on
|
||
|
adminandClaude Opus 5
|
80dd82349d |
The + menu holds fourteen types now, so scrolling one into view belongs to the scaffold (#91)
game-maker / suite (push) Successful in 10m31s
`Variables` pushed `Font` under the menu's mask edge: `locate` still finds the entry, a click there lands on nothing, `__gm.fontPicker()` is null and reading `.captions` throws. Only step 31 carried the scroll workaround, so step 30 fell. The helper moves to `lib/scaffold.mjs` as `pickAssetType()` and both steps use it. Co-Authored-By: Claude Opus 5 <noreply@anthropic.com> |
||
|
rootandClaude Opus 5
|
d5e67cd80c |
A shader costs a source nothing, because a field was already one draw call (#88)
game-maker / suite (push) Successful in 10m9s
A particle source can wear a shader asset the way a sprite does, and it is the
cheapest place in the editor to wear one: a shaded sprite gives up its batch and
costs a draw call of its own, while `ParticleContainerPipe` breaks the batch for
every field regardless. Five hundred shaded particles are the one call five
hundred plain ones were.
The fragment the compiler emits needed no change, only a second vertex stage:
Pixi's particle vertex is GLSL ES 1.00 and ours is ES 3.00, so it is translated
rather than invented. What it sees is a particle's picture, not its life — the
buffer carries five fixed attributes and takes no sixth, so age, index and seed
stay on the graph, which is what the graph is for.
Two things the issue did not ask about:
`Shader.resources` is an accessor over the names its constructor declared, so a
slot that is not declared becomes a loose JS property and is never bound. The
adaptor writes `uTranslationMatrix` into whichever shader the container names —
without an empty block for it the vertex gets no matrix and the particles land
elsewhere.
`schemaOf` in serialize.ts hung on `schema !== schemaFor('sprite')`, an identity
check a source never satisfies, so its shader values would have been dropped on
save.
A source is the one asset drawing rows from two graphs, so a name can arrive
twice. Its own row wins and the uniform keeps its default; nothing is rejected
on the shader's side, because the collision exists only at this one wearer.
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
|
||
|
rootandClaude Opus 5
|
0e0a21dee1 |
One clock under everything that moves by itself (#90)
game-maker / suite (push) Successful in 10m4s
Particle age and shader time each read performance.now() off their own library, and the world got the frame's delta straight from the ticker. Three clocks, so a global time scale would have been three multiplications and a pause three separate freezes. core/time.ts holds one clock instead: it accumulates dt x scale per frame rather than reading the wall clock, and Editor.tick hands the very step it took to the play session, the editor run and the animation preview. Delta time, particle age, shader time and that preview are the same quantity now, so the scale is a single multiplication and a pause is that scale at 0 — nothing underneath needs rebasing, because the clock itself stands still. The Math.min(dt, 0.1) caps in PlaySession and EditorRun are gone: the cap (MAX_FRAME) now sits on the raw frame before scaling, and capping twice would make the world run slower than the particles at scale 2. A pause gates the scale rather than overwriting it — effectiveScale() answers 0 while paused, and for anything that is not a positive finite number, while gameClock.scale keeps its value. A slider later survives a pause that way; the issue asks for none yet. The clock goes back to zero at both ends of a run, so a run is reproducible from second 0 and the scene view looks freshly loaded after Stop. Resetting only on Stop would not do it: the editor clock runs on afterwards, and the next Play would start at "seconds since the last Stop". The trap in that: ParticleField keeps its origin as an absolute second of this clock, so after a reset it lies in the future and every particle would age backwards. One line in sync() starts such a field over, which covers the scene, the game and the tab preview at once — and fixes an older bug of the same shape, where releasing a particleTime() freeze left the preview empty for good. Found while measuring that: ParticlePreview stood at second 0.5 by computing the clock reading that would mean 0.5 since the field started. Over 200000 random origins the round trip misses the last bit in 18.8% of them and shows one particle too few in 9.4%, because floor(0.5 * 20) comes out 9. The check had been flaky since it was written. The panel hands the field the age itself now (ParticleField.hold), and the faked clock is gone. 833 checks (824 + 9), 931 unit tests (921 + 10). Co-Authored-By: Claude Opus 5 <noreply@anthropic.com> |
||
|
rootandClaude Opus 5
|
78baf0c719 |
A source wears an icon without becoming decoration (#89)
game-maker / suite (push) Successful in 9m49s
Behavior and Container draw an icon because isSymbolType() is true for them, but that predicate does not mean "draws an icon" — it means "is editor decoration". Four places read it that way: collectWorldItems, GameViewport. collectFrame and syncDrawOrder all drop symbols out of the running world and the game picture, and placementOf() gives them an upright unscaled box. Listing 'particles' there would have handed the source an icon and taken away its particles, in the scene view as well as in the game. So the two questions are two functions now. hasSceneIcon() says a type draws an icon; isSymbolType() keeps meaning decoration. The icon itself is a SceneViewport decoration, which is editor-only for free because GameViewport never syncs decorations. A ring (r 10, #c26a1f) with four sparks, upright and unscaled like the other symbols, its middle left open — unlike Behavior and Container a source draws something of its own, and the field is densest exactly there. The name sits beside it and a dashed line runs to the parent, same colour. Found while writing the tests: the source's grab box scaled with its transform while the icon did not, so the two came apart. placementOf() returns only the translation for 'particles', making the box the upright 24 x 24 that covers its icon. The source's own transform still feeds every particle untouched. 824 checks (821 + 3). Co-Authored-By: Claude Opus 5 <noreply@anthropic.com> |
||
|
rootandClaude Opus 5
|
8ae20d044f |
Time is an argument, so speed scales it and a prewarm offsets it (#87)
game-maker / suite (push) Successful in 9m48s
Speed and Prewarm are not state and not a second loop: both are arithmetic on the clock argument the field already passes to every particle formula. fieldTime = elapsed * timeScale + prewarmOffset, a pure rule next to liveRange, called at the one place ParticleField.sync forms its time, so preview and world inherit it together. Prewarm offsets by one lifetime because that is the smallest offset which fills a continuous emitter; a burst is dead at time >= lifetime, so the same offset would skip it entirely and it is suppressed there. The tab's slider counts wall-clock seconds, so its span divides by the scale. A missing row falls back to 1 / off, so old project files need no migration. Co-Authored-By: Claude Opus 5 <noreply@anthropic.com> |
||
|
rootandClaude Opus 5
|
fbb2d157f0 |
A held preview is rebased, not paused, and it wears the asset's own rows (#86)
game-maker / suite (push) Successful in 9m42s
Three reports plus one found on the way.
Hold only froze the *picture*: the preview computed a fake second while drawing,
the library clock kept counting underneath, so letting go jumped to "how much
would have passed by now". That is the flip side of the formula model — a thing
that is a function of the clock is not stopped, its origin is moved.
ParticleField.rebase() does that; hold(null) calls it with the second stood at.
The Hold label now mirrors the preview's state instead of its own click history,
so dragging the slider (which holds too) reads `Run`, and Restart puts a held
preview back to 0.00 s rather than leaving it on the second it stopped at.
previewProps only read defaultsFor('particles'), so the panel showed the type's
defaults while the inspector showed the asset's rows. AssetBase.props is a full
bag on a graph asset as well — asset.props now lie over the defaults, the
asset's texture is resolved instead of always drawing a white square, and the
slider's span follows its lifetime. The span is re-read in tick(), because the
rows are edited in the inspector and the tab hears nothing about it.
The preview moves from under the graph to beside it, past a draggable splitter:
a graph is read across, so width is what it can spare and height is not.
AssetTabEditor grows a body() hook for that — the base class still stacks header,
strip and canvas, a subclass may put something next to the canvas.
Found by the full run, not reported: the graph canvas's empty-state hint ran
38 px past its frame now that the preview takes 280 px away. It is cut with
truncate() like any other label.
816 checks (809 + 7).
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
|
||
|
root
|
0f9e1611d1 |
A particle is a function of its age, not a thing that is stepped (#73)
game-maker / suite (push) Failing after 4m22s
The asset type `particles` is placeable and carries a graph at the same time — `behavior` was the blueprint. Because a continuous emitter gives birth to particle n at time n/rate, the whole field is a function of the clock rather than of the frames: no ring-buffer bookkeeping, exact time jumps, reproducibility as a measurable property. compile.ts follows compileShader's frame but emits JS closures into a Float64Array instead of GLSL, and without eval; a node with two consumers is evaluated once. Drawing is one Pixi ParticleContainer per source, so one draw call. Collision, wind and braking in flight are out for good — that is the price of the formula model, not an omission. The tab count goes from nine to ten, which is exactly the case #84 was built for one day earlier: at 1280 px the row no longer holds every tab, so guard 14b now asks for hidden.length > 0 instead of === 0. |