Refactoring round 10 covers everything since round 9 (808e1ee): 110 commits with about 47 000 new lines, nearly all of them sound, sound FX, instruments, patterns and songs. Behaviour is unchanged. Duplicate code (jscpd over src, 50 tokens, TypeScript only, measured on808e1eeand here alike: 47 clones / 426 lines before, 33 / 245 after; round 9 itself ended at 22 / 160 by this count): - PreviewParams (new, editor/soundfx) is the header's parameter bar of the Sound FX and the Instrument tab: values, defaults, fields and the voices a moved field reaches. Both tabs had it line for line. - fxWorklet: an Effect base runs the bit crusher, phaser, flanger, limiter, LFO and bus shifter, a Source base the pitch player and the Chip. Start is the one wait for a voice's first sample, which four processors wrote out each. - nodes/shared has checkPort, detachedPort, fxParamsPort and letRingPort. The Play and Stop nodes of sounds, notes, patterns and songs spelled each port out, up to five times. - parameterValues builds both Sound FX parameters and Instrument parameters, which differed in name and text only. - SetLoopCommand sets the ruler loop of a pattern or a song. It replaces SetPatternLoopCommand and SetSongLoopCommand. - addLink in music/routing is the one rule for a link that both the song routing and the Master routing keep. - eqCurves works out each band and their sum for the EQ tab, which did that in its drawing code. It replaces eqCurveDb, which only a test called. - Smaller ones: the eight neighbour directions of a tile cell, and drawFloatingBox for the shadowed box of Popup and FloatWindow. - Left on purpose: Play pattern and Play song stay two parallel node definitions, and the smaller clones under ten lines stay. Architecture: - SoundLibrary.ts goes from 2897 to 2188 lines. What a stage of a sound FX becomes as Web Audio nodes, and how the knobs of a playing voice move, is now viewport/fxNodes.ts. None of it keeps state of the library. Dead code (TS language service, references per export and member): - soundRefIds, LFO_SHAPE_INDEX, TREMOLO_ROWS, VIBRATO_ROWS and REVERB_ROWS had no reader. The four routing node defs are registered without an unused exported name. - soundFileOf and portTypeOf were called by tests only. The tests now ask findSound and portOf, which the editor uses. DRY moves from src into the one test that uses it. - 51 values used only in their own file lose their `export`. Types and the node catalogues stay exported. - Kept on purpose: neighboursOf is the cell by cell reading the indexed neighboursIn is checked against, and PitchShifter.latency is the test's one view of how late the shifter is. Comments and docs: - Seven comments told history ("no longer", "any more", "as before", "of before #354"). Nine comment blocks ran far past the line width. Proof that this changed no code: the bundle was md5 identical, and the touched tests and e2e modules were identical after esbuild. - README: sound FX, instrument, pattern, song and bus in the asset list, the pages Instruments, Patterns and Songs, 1919 checks. - Wiki: see its own commit. Tests: Gate (melektaus-atx) 274 files, 4236 tests, CHECK EXIT 0 e2e 34, 64, 65 ALL PASSED, 180 checks Unit, touched areas 16 files, 804 tests No check was added, the e2e sum stays at 1919. Counter-checks, each put back by copy and compared with cmp: - addLink without the loop rule: 2 tests fail, one per routing. - eqCurves with the sum of the last band only: 1 test fails. - Start in the worklet never waiting: e2e 34 fails in exactly the four checks that hang on a voice's first sample (Flanger, Tremolo, Chip, a pitched note planned ahead). Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
494 lines
18 KiB
TypeScript
494 lines
18 KiB
TypeScript
/**
|
||
* A sound is an asset holding an uploaded file. Nothing wears it and nothing places it – a graph
|
||
* plays it, and what the asset says about volume and looping is what a bare `Play sound` does.
|
||
*/
|
||
import { describe, expect, it } from 'vitest';
|
||
import {
|
||
buildAsset,
|
||
CreateAssetCommand,
|
||
CreateSoundCommand,
|
||
SetAssetPropertyCommand,
|
||
} from '../../src/core/commands/assetCommands';
|
||
import { AddClipCommand, SetClipPropsCommand } from '../../src/core/commands/clipCommands';
|
||
import type { BehaviorAsset, SoundAsset } from '../../src/core/model/Asset';
|
||
import { isPlaceableType } from '../../src/core/model/AssetTypes';
|
||
import {
|
||
cutChannels,
|
||
cutName,
|
||
cutRange,
|
||
FADE_CURVES,
|
||
fadeGain,
|
||
findSound,
|
||
isSoundFile,
|
||
parseCutName,
|
||
} from '../../src/core/model/sound';
|
||
import { assetRefChoices } from '../../src/core/properties/assetRef';
|
||
import { schemaFor } from '../../src/core/properties/PropertySchema';
|
||
import { playedSoundById, playedSoundOf } from '../../src/core/properties/playedSound';
|
||
import {
|
||
CLIP_ROWS,
|
||
cutOf,
|
||
END_KEY,
|
||
FADE_IN_CURVE_KEY,
|
||
FADE_OUT_CURVE_KEY,
|
||
FADE_IN_KEY,
|
||
FADE_OUT_KEY,
|
||
LOOP_KEY,
|
||
loopsOf,
|
||
REVERSE_KEY,
|
||
START_KEY,
|
||
VOLUME_KEY,
|
||
volumeOf,
|
||
} from '../../src/core/properties/sounds';
|
||
import { deserializeProject } from '../../src/core/store/serialize';
|
||
import type { AudioSink } from '../../src/runtime/systems/Audio';
|
||
import {
|
||
graphEditor,
|
||
makeBehavior,
|
||
makeProject,
|
||
makeSpriteScene,
|
||
place,
|
||
roundTrip,
|
||
type SceneFixture,
|
||
startWorld,
|
||
} from '../helpers';
|
||
|
||
const FILE = `${'a1'.repeat(32)}.wav`;
|
||
|
||
/** Records what it was asked to play instead of making a noise – the AudioSink a test wants. */
|
||
function fakeAudio(): AudioSink & {
|
||
played: { file: string; volume: number; loop: boolean; owner: string }[];
|
||
stopped: string[];
|
||
stoppedOwners: string[];
|
||
} {
|
||
const sink = {
|
||
played: [] as { file: string; volume: number; loop: boolean; owner: string }[],
|
||
stopped: [] as string[],
|
||
stoppedOwners: [] as string[],
|
||
play: (file: string, volume: number, loop: boolean, owner: string) =>
|
||
sink.played.push({ file, volume, loop, owner }),
|
||
playNote: () => 0,
|
||
playSequence: () => 0,
|
||
stopSequence: () => {},
|
||
playClip: () => 0,
|
||
stopPlayback: () => {},
|
||
release: () => {},
|
||
tune: () => {},
|
||
length: () => 0,
|
||
tail: () => 0,
|
||
stop: (file: string) => sink.stopped.push(file),
|
||
stopVoice: () => {},
|
||
stopOwner: (owner: string) => sink.stoppedOwners.push(owner),
|
||
setMix: () => {},
|
||
setMixVolume: () => {},
|
||
mixVolume: () => 1,
|
||
resetMix: () => {},
|
||
tuneMix: () => {},
|
||
};
|
||
return sink;
|
||
}
|
||
|
||
function makeSound(name = 'Jump', file = FILE) {
|
||
const fixture = makeProject();
|
||
const command = new CreateSoundCommand(name, file);
|
||
fixture.stack.execute(command);
|
||
return { ...fixture, sound: command.asset };
|
||
}
|
||
|
||
/** A scene whose one behavior plays `sound` on start, with whatever the node itself carries. */
|
||
function playingScene(params: Record<string, string | number | boolean> = {}) {
|
||
const f: SceneFixture & { behavior?: BehaviorAsset } = makeSpriteScene('Box');
|
||
const create = new CreateSoundCommand('Jump', FILE);
|
||
f.stack.execute(create);
|
||
const behavior = makeBehavior(f, 'Logic');
|
||
const box = place(f, f.spriteId, { x: 0, y: 0 });
|
||
place(f, behavior.id, { x: 0, y: 0 }, box);
|
||
const edit = graphEditor(f, behavior);
|
||
const start = edit.addNode('OnStart');
|
||
const play = edit.addNode('PlaySound', { sound: create.asset.id, volume: 1, ...params });
|
||
edit.connect(start, 'exec', play, 'exec');
|
||
return { ...f, sound: create.asset, behavior, play };
|
||
}
|
||
|
||
describe('sound files', () => {
|
||
it('accepts only a content-addressed name in a supported format', () => {
|
||
expect(isSoundFile(FILE)).toBe(true);
|
||
expect(isSoundFile(`${'b3'.repeat(32)}.mp3`)).toBe(true);
|
||
expect(isSoundFile(`${'b3'.repeat(32)}.m4a`)).toBe(true);
|
||
expect(isSoundFile(`${'a1'.repeat(32)}.png`)).toBe(false);
|
||
expect(isSoundFile(`${'a1'.repeat(32)}.WAV`)).toBe(false);
|
||
expect(isSoundFile('jump.wav')).toBe(false);
|
||
expect(isSoundFile('')).toBe(false);
|
||
});
|
||
});
|
||
|
||
describe('the sound asset', () => {
|
||
it('is not placeable, starts without a file, and is full volume and one-shot by default', () => {
|
||
expect(isPlaceableType('sound')).toBe(false);
|
||
const asset = buildAsset('sound', 'Sound');
|
||
expect(asset).toMatchObject({ type: 'sound', file: '' });
|
||
expect(volumeOf(asset.props)).toBe(1);
|
||
expect(loopsOf(asset.props)).toBe(false);
|
||
// The cut belongs to a clip of the sound (#357), the sound is the whole file.
|
||
expect(schemaFor('sound').map((def) => def.key)).toEqual([VOLUME_KEY, LOOP_KEY, 'fx']);
|
||
expect(CLIP_ROWS.map((def) => def.key)).toEqual([
|
||
START_KEY,
|
||
END_KEY,
|
||
REVERSE_KEY,
|
||
FADE_IN_KEY,
|
||
FADE_IN_CURVE_KEY,
|
||
FADE_OUT_KEY,
|
||
FADE_OUT_CURVE_KEY,
|
||
]);
|
||
expect(cutOf({})).toEqual({
|
||
start: 0,
|
||
end: 0,
|
||
fadeIn: 0.005,
|
||
fadeOut: 0.005,
|
||
curveIn: 'linear',
|
||
curveOut: 'linear',
|
||
reverse: false,
|
||
});
|
||
});
|
||
|
||
it('refuses a file name the server could not have produced', () => {
|
||
const fixture = makeProject();
|
||
expect(() => fixture.stack.execute(new CreateSoundCommand('Bad', 'jump.wav'))).toThrow(
|
||
'is not a stored sound file',
|
||
);
|
||
expect(fixture.project.assets).toHaveLength(0);
|
||
});
|
||
|
||
it('survives a round trip and drops a file name it cannot trust', () => {
|
||
const s = makeSound();
|
||
expect(roundTrip(s.project)).toEqual(s.project);
|
||
|
||
const repaired = deserializeProject({
|
||
name: 'P',
|
||
assets: [
|
||
{ id: 's1', type: 'sound', name: 'Local', file: '../../etc/passwd' },
|
||
{ id: 's2', type: 'sound', name: 'Gone' },
|
||
],
|
||
});
|
||
expect(repaired.assets.map((a) => (a as SoundAsset).file)).toEqual(['', '']);
|
||
});
|
||
|
||
it('resolves to a file, and to none when the id is unset, dangling or of another type', () => {
|
||
const s = makeSound();
|
||
expect(findSound(s.project, s.sound.id)?.asset.file).toBe(FILE);
|
||
expect(findSound(s.project, '')).toBeNull();
|
||
expect(findSound(s.project, 'no-such-asset')).toBeNull();
|
||
|
||
const text = new CreateAssetCommand('text', 'Title');
|
||
s.stack.execute(text);
|
||
expect(findSound(s.project, text.asset.id)).toBeNull();
|
||
});
|
||
|
||
it('is what a sound picker offers, and nothing else is', () => {
|
||
const s = makeSound();
|
||
s.stack.execute(new CreateAssetCommand('text', 'Title'));
|
||
expect(assetRefChoices(s.project, ['sound']).map((a) => a.id)).toEqual([s.sound.id]);
|
||
});
|
||
});
|
||
|
||
describe('the cut of a sound (#343)', () => {
|
||
it('is no cut at all over the whole file, and a name of its own otherwise', () => {
|
||
const linear = { curveIn: 'linear', curveOut: 'linear', reverse: false } as const;
|
||
const whole = { start: 0, end: 0, fadeIn: 0.005, fadeOut: 0.005, ...linear };
|
||
expect(cutName(FILE, whole)).toBe(FILE);
|
||
expect(cutName('', { ...whole, start: 1 })).toBe('');
|
||
const cut = {
|
||
start: 0.25,
|
||
end: 1.5,
|
||
fadeIn: 0.005,
|
||
fadeOut: 0.2,
|
||
curveIn: 'sCurve',
|
||
curveOut: 'equalPower',
|
||
reverse: false,
|
||
} as const;
|
||
const name = cutName(FILE, cut);
|
||
expect(name).toBe(`${FILE}#0.25~1.5~0.005~0.2~sCurve~equalPower`);
|
||
expect(parseCutName(name)).toEqual({ file: FILE, cut });
|
||
expect(parseCutName(FILE)).toEqual({ file: FILE, cut: null });
|
||
expect(parseCutName(`${FILE}#x~-2`)).toEqual({
|
||
file: FILE,
|
||
cut: { start: 0, end: 0, fadeIn: 0, fadeOut: 0, ...linear },
|
||
});
|
||
});
|
||
|
||
it('keeps at least a sample inside the file, and ramps only the edges inside it, each by its own fade', () => {
|
||
// 10 samples at 10 Hz: one sample per tenth of a second.
|
||
const fades = (fadeIn: number, fadeOut = fadeIn) => ({
|
||
fadeIn,
|
||
fadeOut,
|
||
curveIn: 'linear' as const,
|
||
curveOut: 'linear' as const,
|
||
reverse: false,
|
||
});
|
||
expect(cutRange(10, 10, { start: 0.2, end: 0.8, ...fades(0.2) })).toEqual({
|
||
from: 2,
|
||
to: 8,
|
||
fadeIn: 2,
|
||
fadeOut: 2,
|
||
curveIn: 'linear',
|
||
curveOut: 'linear',
|
||
reverse: false,
|
||
});
|
||
expect(cutRange(10, 10, { start: 0.1, end: 0.9, ...fades(0.1, 0.3) })).toMatchObject({
|
||
fadeIn: 1,
|
||
fadeOut: 3,
|
||
});
|
||
expect(cutRange(10, 10, { start: 0, end: 0.5, ...fades(0.2) })).toMatchObject({ fadeIn: 0, fadeOut: 2 });
|
||
expect(cutRange(10, 10, { start: 0.5, end: 0, ...fades(0.2) })).toMatchObject({
|
||
to: 10,
|
||
fadeIn: 2,
|
||
fadeOut: 0,
|
||
});
|
||
// Past the end, an end before the start, and fades longer than half of what is kept.
|
||
expect(cutRange(10, 10, { start: 5, end: 0, ...fades(0) })).toMatchObject({ from: 9, to: 10 });
|
||
expect(cutRange(10, 10, { start: 0.6, end: 0.3, ...fades(0) })).toMatchObject({ from: 6, to: 7 });
|
||
expect(cutRange(10, 10, { start: 0.2, end: 0.6, ...fades(1, 0.1) })).toMatchObject({
|
||
fadeIn: 2,
|
||
fadeOut: 1,
|
||
});
|
||
});
|
||
|
||
it('cuts every channel alike, rising from silence and falling to it at an inner edge', () => {
|
||
const left = new Float32Array(10).fill(1);
|
||
const right = new Float32Array(10).fill(-0.5);
|
||
const [l, r] = cutChannels([left, right], {
|
||
from: 2,
|
||
to: 8,
|
||
fadeIn: 2,
|
||
fadeOut: 2,
|
||
curveIn: 'linear',
|
||
curveOut: 'linear',
|
||
reverse: false,
|
||
});
|
||
expect(Array.from(l!)).toEqual([0, 0.5, 1, 1, 0.5, 0]);
|
||
expect(Array.from(r!)).toEqual([-0, -0.25, -0.5, -0.5, -0.25, -0]);
|
||
expect(Array.from(left)).toEqual(new Array(10).fill(1));
|
||
});
|
||
|
||
it('shapes each ramp by its own curve, the end running it backwards (#345)', () => {
|
||
for (const { value } of FADE_CURVES) {
|
||
expect(fadeGain(value, 0)).toBeCloseTo(0, 12);
|
||
expect(fadeGain(value, 1)).toBeCloseTo(1, 12);
|
||
}
|
||
expect(fadeGain('linear', 0.5)).toBe(0.5);
|
||
expect(fadeGain('equalPower', 0.5)).toBeCloseTo(Math.SQRT1_2, 12);
|
||
expect(fadeGain('sCurve', 0.25)).toBeCloseTo(1 - fadeGain('sCurve', 0.75), 12);
|
||
expect(fadeGain('exponential', 0.5)).toBe(0.25);
|
||
expect(fadeGain('logarithmic', 0.5)).toBe(0.75);
|
||
const [kept] = cutChannels([new Float32Array(12).fill(1)], {
|
||
from: 0,
|
||
to: 12,
|
||
fadeIn: 4,
|
||
fadeOut: 4,
|
||
curveIn: 'exponential',
|
||
curveOut: 'logarithmic',
|
||
reverse: false,
|
||
});
|
||
expect(Array.from(kept!)).toEqual([0, 0.0625, 0.25, 0.5625, 1, 1, 1, 1, 0.9375, 0.75, 0.4375, 0]);
|
||
});
|
||
|
||
it('is what every way of playing a clip is given, its fades in milliseconds on the clip (#357)', () => {
|
||
const f = playingScene();
|
||
expect(playedSoundOf({ asset: f.sound, clip: null })).toBe(FILE);
|
||
const add = new AddClipCommand(f.sound.id, { [START_KEY]: 0.5, [FADE_IN_KEY]: 25 });
|
||
f.stack.execute(add);
|
||
f.stack.execute(
|
||
new SetClipPropsCommand(f.sound.id, add.clipId, {
|
||
[FADE_OUT_KEY]: 40,
|
||
[FADE_OUT_CURVE_KEY]: 'equalPower',
|
||
}),
|
||
);
|
||
const name = `${FILE}#0.5~0~0.025~0.04~linear~equalPower`;
|
||
expect(playedSoundById(f.project, add.clipId)).toBe(name);
|
||
// The sound itself stays the whole file.
|
||
expect(playedSoundById(f.project, f.sound.id)).toBe(FILE);
|
||
expect(playedSoundById(f.project, '')).toBe('');
|
||
f.play.params.sound = add.clipId;
|
||
const audio = fakeAudio();
|
||
startWorld(f, { behaviors: true, audio }).frame();
|
||
expect(audio.played).toMatchObject([{ file: name }]);
|
||
});
|
||
|
||
it('plays backwards from its end, the fade in ramping there (#321)', () => {
|
||
const fades = { fadeIn: 0.2, fadeOut: 0.2, curveIn: 'linear', curveOut: 'linear' } as const;
|
||
// Kept up to the middle of a 10-sample file: only the end lies inside, and it is heard first.
|
||
expect(cutRange(10, 10, { start: 0, end: 0.5, ...fades, reverse: true })).toMatchObject({
|
||
from: 0,
|
||
to: 5,
|
||
fadeIn: 2,
|
||
fadeOut: 0,
|
||
reverse: true,
|
||
});
|
||
const ramp = Float32Array.from({ length: 10 }, (_, i) => i);
|
||
const [kept] = cutChannels([ramp], {
|
||
from: 2,
|
||
to: 8,
|
||
fadeIn: 2,
|
||
fadeOut: 1,
|
||
curveIn: 'linear',
|
||
curveOut: 'linear',
|
||
reverse: true,
|
||
});
|
||
expect(Array.from(kept!)).toEqual([0, 3, 5, 4, 3, 0]);
|
||
expect(Array.from(ramp)).toEqual([0, 1, 2, 3, 4, 5, 6, 7, 8, 9]);
|
||
|
||
const f = playingScene();
|
||
const add = new AddClipCommand(f.sound.id, { [REVERSE_KEY]: true });
|
||
f.stack.execute(add);
|
||
const name = `${FILE}#0~0~0.005~0.005~linear~linear~reverse`;
|
||
expect(playedSoundById(f.project, add.clipId)).toBe(name);
|
||
expect(parseCutName(name).cut).toMatchObject({ start: 0, end: 0, reverse: true });
|
||
f.stack.execute(new SetClipPropsCommand(f.sound.id, add.clipId, { [REVERSE_KEY]: false }));
|
||
expect(playedSoundById(f.project, add.clipId)).toBe(FILE);
|
||
});
|
||
});
|
||
|
||
describe('Play sound', () => {
|
||
it('plays the asset as the project describes it', () => {
|
||
const f = playingScene();
|
||
const audio = fakeAudio();
|
||
startWorld(f, { behaviors: true, audio }).frame();
|
||
expect(audio.played).toMatchObject([{ file: FILE, volume: 1, loop: false }]);
|
||
});
|
||
|
||
it('scales the asset volume rather than replacing it, and clamps the product', () => {
|
||
const f = playingScene({ volume: 0.5 });
|
||
f.stack.execute(new SetAssetPropertyCommand(f.sound.id, VOLUME_KEY, 0.4));
|
||
const audio = fakeAudio();
|
||
startWorld(f, { behaviors: true, audio }).frame();
|
||
expect(audio.played[0]?.volume).toBeCloseTo(0.2);
|
||
|
||
const loud = playingScene({ volume: 10 });
|
||
const loudAudio = fakeAudio();
|
||
startWorld(loud, { behaviors: true, audio: loudAudio }).frame();
|
||
expect(loudAudio.played[0]?.volume).toBe(1);
|
||
});
|
||
|
||
it('loops as the asset says while the node says nothing', () => {
|
||
const asset = playingScene();
|
||
asset.stack.execute(new SetAssetPropertyCommand(asset.sound.id, LOOP_KEY, true));
|
||
const assetAudio = fakeAudio();
|
||
startWorld(asset, { behaviors: true, audio: assetAudio }).frame();
|
||
expect(assetAudio.played[0]?.loop).toBe(true);
|
||
|
||
const node = playingScene({ loop: 'true' });
|
||
const nodeAudio = fakeAudio();
|
||
startWorld(node, { behaviors: true, audio: nodeAudio }).frame();
|
||
expect(nodeAudio.played[0]?.loop).toBe(true);
|
||
});
|
||
|
||
/** The reason the node asks for three answers rather than a checkbox: music played as a one-shot. */
|
||
it('plays a looping asset once when the node says off', () => {
|
||
const f = playingScene({ loop: 'false' });
|
||
f.stack.execute(new SetAssetPropertyCommand(f.sound.id, LOOP_KEY, true));
|
||
const audio = fakeAudio();
|
||
startWorld(f, { behaviors: true, audio }).frame();
|
||
expect(audio.played[0]?.loop).toBe(false);
|
||
});
|
||
|
||
it('takes a boolean arriving over an edge literally', () => {
|
||
const on = playingScene();
|
||
const onEdit = graphEditor(on, on.behavior);
|
||
onEdit.connect(onEdit.addNode('Boolean', { value: true }), 'value', on.play, 'loop');
|
||
const onAudio = fakeAudio();
|
||
startWorld(on, { behaviors: true, audio: onAudio }).frame();
|
||
expect(onAudio.played[0]?.loop).toBe(true);
|
||
|
||
const off = playingScene();
|
||
off.stack.execute(new SetAssetPropertyCommand(off.sound.id, LOOP_KEY, true));
|
||
const offEdit = graphEditor(off, off.behavior);
|
||
offEdit.connect(offEdit.addNode('Boolean', { value: false }), 'value', off.play, 'loop');
|
||
const offAudio = fakeAudio();
|
||
startWorld(off, { behaviors: true, audio: offAudio }).frame();
|
||
expect(offAudio.played[0]?.loop).toBe(false);
|
||
});
|
||
|
||
it('plays nothing for an id that resolves to no sound, and does not stop the flow', () => {
|
||
const f = playingScene();
|
||
const edit = graphEditor(f, f.behavior);
|
||
const log = edit.addNode('Log', { message: 'after' });
|
||
edit.connect(f.play, 'exec', log, 'exec');
|
||
f.play.params.sound = 'no-such-asset';
|
||
|
||
const audio = fakeAudio();
|
||
const { world, frame } = startWorld(f, { behaviors: true, audio });
|
||
frame();
|
||
expect(audio.played).toEqual([]);
|
||
expect(world.log).toEqual(['after']);
|
||
});
|
||
});
|
||
|
||
/**
|
||
* A sound is something a thing in the world is *doing*, so it ends when that thing does – the
|
||
* `Stop sound` you would otherwise have to remember in every `On destroy`.
|
||
*/
|
||
describe('a voice belongs to the behavior that started it', () => {
|
||
it('names that behavior as its owner, and nobody when the node is detached', () => {
|
||
const owned = playingScene();
|
||
const ownedAudio = fakeAudio();
|
||
const run = startWorld(owned, { behaviors: true, audio: ownedAudio });
|
||
run.frame();
|
||
const logic = run.world.entities.find((e) => e.name === 'Logic')!;
|
||
expect(ownedAudio.played[0]?.owner).toBe(logic.id);
|
||
|
||
const free = playingScene({ detached: true });
|
||
const freeAudio = fakeAudio();
|
||
startWorld(free, { behaviors: true, audio: freeAudio }).frame();
|
||
expect(freeAudio.played[0]?.owner).toBe('');
|
||
});
|
||
|
||
it('is silenced when the behavior is destroyed, after On destroy has had its say', () => {
|
||
const f = playingScene();
|
||
const edit = graphEditor(f, f.behavior);
|
||
const key = edit.addNode('OnKeyDown', { key: 'x' });
|
||
const owner = edit.addNode('Owner');
|
||
const destroy = edit.addNode('Destroy');
|
||
edit.wire([
|
||
[key, 'exec', destroy, 'exec'],
|
||
[owner, 'object', destroy, 'object'],
|
||
]);
|
||
|
||
const audio = fakeAudio();
|
||
const { world, input, frame } = startWorld(f, { behaviors: true, audio });
|
||
frame();
|
||
const logic = world.entities.find((e) => e.name === 'Logic')!;
|
||
expect(audio.stoppedOwners).toEqual([]);
|
||
|
||
input.press('x');
|
||
frame();
|
||
expect(audio.stoppedOwners).toEqual([logic.id]);
|
||
});
|
||
});
|
||
|
||
describe('Stop sound', () => {
|
||
it('silences one sound by its file, and everything when it names none', () => {
|
||
const f = playingScene();
|
||
const edit = graphEditor(f, f.behavior);
|
||
const stop = edit.addNode('StopSound', { sound: f.sound.id });
|
||
const all = edit.addNode('StopSound', { sound: '' });
|
||
edit.connect(f.play, 'exec', stop, 'exec');
|
||
edit.connect(stop, 'exec', all, 'exec');
|
||
|
||
const audio = fakeAudio();
|
||
startWorld(f, { behaviors: true, audio }).frame();
|
||
expect(audio.stopped).toEqual([FILE, '']);
|
||
});
|
||
|
||
it('silences nothing at all for an id that resolves to no sound', () => {
|
||
const f = playingScene();
|
||
const edit = graphEditor(f, f.behavior);
|
||
const stop = edit.addNode('StopSound', { sound: 'no-such-asset' });
|
||
edit.connect(f.play, 'exec', stop, 'exec');
|
||
|
||
const audio = fakeAudio();
|
||
startWorld(f, { behaviors: true, audio }).frame();
|
||
// Not `['']`: a dangling reference must not turn into "stop everything".
|
||
expect(audio.stopped).toEqual([]);
|
||
});
|
||
});
|