Files
adminandClaude Opus 5
6371576d37
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
A vector art asset is a picture now, which is stage 2 of #129 and the first stage that shows something in the browser: the asset sits in the picture picker, a sprite carries it in its Texture row and what the sprite shows has been rasterized from the shapes, the generator of #185 being registered for the type vectorart - installVectorArtPictures(app.renderer) hooks the source (core) and the generator (viewport) in once per page from App.ts, by a call and not by a module side effect, so a test may install it or leave it out; the rule lives in core and the painting in viewport - the new core/model/vectorPath.ts turns a shape into plain drawing commands (move/line/curve/close), closed rings being filled while all rings are stroked, a segment staying a line as long as neither of its ends carries a handle - a single handle is enough for a curve, the missing control point sitting on its own end, so a corner may stand next to a round side - and the way back to the first point is only drawn when it is curved, close doing it otherwise; holes go through one door only, Pixi recognising them from a GraphicsPath with checkForHoles, which tests containment rather than even-odd depth, which is enough for a ring inside a ring while without the flag the inner ring simply paints over the outer one (measured, see the counter-checks); the oversampling is the 2x from the plan - RenderTexture.create({resolution: 2}) puts 512 px on the GPU for a 256 canvas while texture.width stays the canvas size, which is the measure the sprite hangs on, and the render texture is the clip itself, so what juts out over the canvas is not in it and needs no mask; drawn pictures get the same sampler state as uploaded ones, setPictureFactory wrapping the factory for it, mirroring keep(); two measuring traps cost me runs - __gm.objectRect(id) gives the centre of the object and not its corner, so the first pass read four pixels next to the sprite and reported background while the rasterizer was correct, and the grid lines of the scene cross exactly in the centre point, so the hole check read #363940 and failed for the right reason, measuring beside it now; renderer.render() runs inside the picture request, which is safe here because every caller asks during its own widget redraw and the frame is drawn on the ticker afterwards, a nested render inside a running render pass would not be - that warning stands in the module head and in the notes; new module 47 with 8 own checks in its own lane (the picture on the GPU at double resolution measuring the canvas, the sprite showing the fill, the inner ring being a hole with the scene shining through, the later shape on top, the stroke running along the ring, a changed drawing getting a new key with the old one freed, and the sprite showing the new colour), the shapes being put into the model by mutate because the tab that draws them is stage 3, and 21 new unit tests in tests/core/vector-path.test.ts; three counter-checks hold: oversampling back to 1 fails the GPU check, checkForHoles off fails the hole check, and not drawing the curved way back fails a unit test; the full suite ran locally instead of only in CI because the change sits in TextureLibrary and touches every picture: ALL PASSED - 1165 checks, measured and carried into README and the wiki (#129)
The topbar is icons only: the leading Project dropdown, the Scene picker and the labelled Play/Pause buttons are gone and in their place stand five icon buttons - menu, undo, redo on the left, play and pause in the middle - while Notice, the save state, fps and the Account menu keep the right side; the Play button swaps its icon for a stop square while the project runs and Pause swaps for a second play sign while it is held (Button.setIcon()), and iconSpace() drops the gap between icon and label when a button has no label, which is what kept a 24 px icon button 3 px off its own centre; the menu carries New project, Open project..., a separator and Project settings..., where the picker (src/editor/OpenProjectDialog.ts) preselects the open project and marks it "open", opens on a double click and puts Delete on the left of Cancel and Open - it closes itself before it asks whether to delete, because two modals on top of each other would have left the question standing over a list it no longer speaks about - and the settings dialog (src/editor/ProjectSettingsDialog.ts) holds the name, the "Play starts" switch (Start scene / Active scene, a preference of this browser and so no command) and the collision layers from #152, which retires CollisionLayersDialog.ts and the "Collision layers..." entry; what Apply actually writes is the pure function settingsChanges(), so renaming and the layers are each their own undo step and each drop out when nothing differs; the Scene dropdown falls away without replacement, the active scene is switched by double clicking it in the Assets panel, which is the way that was there anyway; new module 46 runs last with 9 checks (no label left in the bar, the run buttons in edit mode, the four menu entries, the picker with the open project preselected, Cancel leaving the project standing, the settings dialog on the state of the project, renaming with undo and redo through the icon buttons) and it neither opens nor deletes a project, because that would pull the project out from under every earlier module; modules 8, 18 and 35 and the harness follow the new bar, 6 unit tests cover settingsChanges and 3 the icons (#183)
The topbar is icons only: the leading Project dropdown, the Scene picker and the labelled Play/Pause buttons are gone and in their place stand five icon buttons - menu, undo, redo on the left, play and pause in the middle - while Notice, the save state, fps and the Account menu keep the right side; the Play button swaps its icon for a stop square while the project runs and Pause swaps for a second play sign while it is held (Button.setIcon()), and iconSpace() drops the gap between icon and label when a button has no label, which is what kept a 24 px icon button 3 px off its own centre; the menu carries New project, Open project..., a separator and Project settings..., where the picker (src/editor/OpenProjectDialog.ts) preselects the open project and marks it "open", opens on a double click and puts Delete on the left of Cancel and Open - it closes itself before it asks whether to delete, because two modals on top of each other would have left the question standing over a list it no longer speaks about - and the settings dialog (src/editor/ProjectSettingsDialog.ts) holds the name, the "Play starts" switch (Start scene / Active scene, a preference of this browser and so no command) and the collision layers from #152, which retires CollisionLayersDialog.ts and the "Collision layers..." entry; what Apply actually writes is the pure function settingsChanges(), so renaming and the layers are each their own undo step and each drop out when nothing differs; the Scene dropdown falls away without replacement, the active scene is switched by double clicking it in the Assets panel, which is the way that was there anyway; new module 46 runs last with 9 checks (no label left in the bar, the run buttons in edit mode, the four menu entries, the picker with the open project preselected, Cancel leaving the project standing, the settings dialog on the state of the project, renaming with undo and redo through the icon buttons) and it neither opens nor deletes a project, because that would pull the project out from under every earlier module; modules 8, 18 and 35 and the harness follow the new bar, 6 unit tests cover settingsChanges and 3 the icons (#183)
A picture in the editor may now be drawn instead of uploaded, which is the piece #129 (Vector art) and #130 (Pixel editor) both need and neither could build alone: TextureRef.file has been a file name on the server, isTextureFile() checking a sha256 hash plus an extension and TextureLibrary fetching it over HTTP, so an asset that paints its own image had nowhere to put itself - the key now also takes the form gen:<assetId>@<revision>, which an uploaded file can never look like, and everything that only passes a ref along (sprite, tile, tilemap mesh, particle source, shaders, aspect ratio) is untouched because it still sees a Texture; the revision is a string, not a counter, which is the one deviation from the plan in the issue and costs nothing - gen:a1@7 and gen:a1@c0ffee go through the same door, so a generator may fingerprint its own content instead of relying on every command to remember to bump a number; two registries keyed by asset type as a plain string, so a plugin may bring its own type - registerPictureSource(type, read) in the new core/model/generated.ts tells the model canvas size and revision and resolvePicture() builds the ref from it (no rect, no slice, smooth from props.filter like a texture), and registerPictureGenerator(type, draw) in the new viewport/generatedPictures.ts hands out the finished texture, projectPictureFactory(() => state.project) tying the two together per session in App.ts; invalidation is a rule instead of guesswork at twenty call sites: GeneratedPictures<T> holds one picture per asset keyed on the revision and frees the old one as soon as the new is drawn, TextureLibrary destroying it and dropping the crops cut from it, while a generator that cannot draw yet is not remembered but asked again next time - the class imports Pixi as a type only, so the whole bookkeeping is measurable without a GPU; carried along are the picture picker (a drawn asset sits among the textures by name, without frames), the delete warning (counts tiles and animations for it too) and the asset context menu, where "Create sprite from picture" now covers it while "Create animation from texture" stays texture-only because it needs frames; one finding while probing - crop() could not have cut a generated texture at all, a RenderTexture having no source.resource to draw back from and drawImage running onto null, so it is handed out whole, a drawn picture having no sheet whose neighbouring row could bleed in; 18 new unit tests, 10 in tests/core/generated-picture.test.ts (building and splitting the key, an uploaded file is not one, no registry means no picture, resolving to canvas size, a new revision is a new key, a canvas without a size, the filter, the sprite size, picker order) and 8 in tests/viewport/generated-pictures.test.ts (drawing once, freeing the old revision and only for its own asset, null is not remembered, no key means nothing drawn, a session change gives everything back, peek), and three counter-checks hold: dropping generated assets from resolvePicture fails 5 of the 10 core tests, not freeing the old revision fails 1 viewport test, and narrowing the picker back to textures fails 3; no e2e check and the check sum stays 1157, because without a generator the groundwork shows nothing in the browser - that evidence comes with #129 (#185)
The new node "Raycast all" answers with every collider along the ray instead of only the nearest one: it carries the same inputs and settings as Raycast (Ignore owner, Hit triggers, Layers from #158) plus "max hits" where 0 means all, and it hands back parallel lists sorted by distance - objects, colliders, points x/y, normals x/y, distances - next to count, so index i of every list speaks about the same hit; a collider counts once no matter how many convex parts its shape is built from, while a tilemap counts per cell it is hit in, and the filter sits in Solids.raycastAll like the one of #158, the one path the editor run and Play both take, so all 12 new unit tests run through describe.each against both systems; the node needed the value system to learn something it could not do - a graph list carried numbers, text, booleans and bundles but no object handles, asList turned an object into its name, so objects/colliders would have been lists of names, which loses the object when two carry the same name, and collider children usually do; Value now knows a travelling list that may hold handles and "Item at" gives such an item out as an object, ready for Destroy, Apply force or Name of, while the single door into a stored file - writeTyped/asTypeOf - runs the list through the new storedList() so every object becomes its name again and nothing living reaches a project file, which is its own unit test over JSON.stringify; three list nodes follow the handles: "Index of" compares objects by identity because a name is not the object of that name, "Set item" and "Fill" write an object as an object, and "Join text" prints the names instead of the innards; this decision was mine to make because the question ran into the MCP timeout - the alternative was a list of names plus "Object by name", which is the smaller change but lossy; 4 new e2e checks in the new block 43e (shield and floor in one go reading 2 and "145, 280", the second object answering to its name, which only a real object in a list can do, "max hits" 1 stopping at the nearest, and the node showing the row) and 18 new unit tests, 12 in raycast.test.ts, 4 on the value system and 2 in the node catalog; two counter-checks hold: not counting tilemap cells one by one drops 2 unit tests, and answering with the nearest hit only drops module 43 with 2 FAILs; one finding on the way - the node read "maxHits" while every other input carries a spoken label, because int() took the key as its label, so it has a third parameter now, and the e2e check caught that, no unit test did (#157)