Files
feuerwerk/tests/helpers.ts
T
adminandClaude Opus 5.5 3e8c88c66d
game-maker / gate (push) Successful in 2m36s
game-maker / suite (push) Successful in 13m16s
Add a node that names the collision layer of an object (#211)
The issue asked for three nodes: Set layer, Set collides with and Layer
of. A probe showed that the finding behind the first two is outdated.
The Properties node of type Collider already writes both settings while
the game runs, and both collision systems see the change at once. As
agreed, only Layer of is built, and writing stays with Properties.

- Layer of is a data node with the input object and the outputs name
  and number. The name is what the project calls the layer.
- NodeContext.collisionLayerOf answers the number, and the new field
  collisionLayers on GraphLookup brings the names to the node.
- layerHolderOf in solids.ts says whose layer counts. An object stands
  for its first collider child, a collider or tilemap for itself.
- Decided here: a collider that is switched off counts too, because
  its layer is set either way.
- Decided here: without a collider the name is empty and the number
  is -1.
- The node is a read, not a run, so it answers at the moment it is
  asked. Right after a Set in the same flow it names the new layer.
- The output number was not asked for. It fits the layer port of
  Properties as it is.

Changing the layer during a run had no test at all so far. Five tests
now hold it in both systems.

Tests:
- Gate: 198 files, 2929 tests (2914 + 15), exit 0
- e2e 1-6: 285 checks passed (06: +2 for block 6z-x)
- Five unit tests for the change during a run: a mover is blocked,
  passes and is blocked again, a ray with a layer filter follows the
  change, and a dynamic body falls through the ground in Play
- Six unit tests for Layer of, three against each system, and four
  cases in the node catalog
- 6z-x finds the node in the palette, checks its ports and logs
  "Ghost" and "1" for the owner's collider in a Play run
- Two counter-probes for the change during a run fail 1 and 4 tests,
  and only new ones, so those places were unguarded before
- Six counter-probes for Layer of fail 2 to 3 tests each. All eight
  ran on stein2, not in the container.
- The browser counter-probe fails 6z-x with "Layer 1" and "1"
- The e2e sum of 1619 is calculated (1617 measured in CI run 276,
  plus 2). Neither the full suite nor the smokes ran for this state.
- Not looked at in the browser: that the layer port of Properties
  shows the same picker as the inspector.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
2026-10-01 16:16:43 +02:00

403 lines
15 KiB
TypeScript
Raw Blame History

This file contains ambiguous Unicode characters
This file contains Unicode characters that might be confused with other characters. If you think that this is intentional, you can safely ignore this warning. Use the Escape button to reveal them.
import { CreateAssetCommand } from '../src/core/commands/assetCommands';
import { CommandStack } from '../src/core/commands/CommandStack';
import { AddNodeCommand, ConnectCommand } from '../src/core/commands/graphCommands';
import { AddPortsCommand } from '../src/core/commands/portCommands';
import { PlaceAssetCommand } from '../src/core/commands/sceneObjectCommands';
import { requireNodeDef } from '../src/core/commands/require';
import { AddVariableCommand } from '../src/core/commands/variableCommands';
import {
type DeclaredPort,
emptySharedState,
ENTITY_HANDLE,
type EntityHandle,
type GraphLookup,
type GraphNode,
NO_LOOKUP,
type NodeContext,
type PointerState,
type Value,
type RunResult,
portKindOf,
PROPERTIES,
VARIABLES,
VARIABLES_PARAM,
} from '../src/core/graph';
import type { GraphInterpreter } from '../src/core/graph/GraphInterpreter';
import type { BehaviorAsset, SceneAsset, VariablesAsset } from '../src/core/model/Asset';
import { findObject } from '../src/core/model/hierarchy';
import { worldPosition } from '../src/core/properties/transform';
import { resolvedHolder } from '../src/core/model/instance';
import type { Position, PropertyBag, Vec2 } from '../src/core/model/Properties';
import { createEmptyProject, findScene, type Project } from '../src/core/model/Project';
import type { SceneObject } from '../src/core/model/SceneObject';
import { deserializeProject, serializeProject } from '../src/core/store/serialize';
import type { AudioSink } from '../src/runtime/systems/Audio';
import { BehaviorSystem, type TimeScaled } from '../src/runtime/systems/BehaviorSystem';
import type { SaveArea } from '../src/core/graph/savedValues';
import { readyPhysics } from '../src/runtime/physics/engine';
import { PhysicsSystem } from '../src/runtime/physics/PhysicsSystem';
import { CollisionSystem } from '../src/runtime/systems/CollisionSystem';
import type { CollisionSource } from '../src/runtime/systems/solids';
import { AnimationSystem } from '../src/runtime/systems/AnimationSystem';
import { Input } from '../src/runtime/systems/Input';
import { World } from '../src/runtime/World';
export interface ProjectFixture {
project: Project;
stack: CommandStack;
}
export interface SceneFixture extends ProjectFixture {
sceneId: string;
spriteId: string;
/** The scene asset, looked up fresh (undo may replace it). */
sceneOf(): SceneAsset;
/** The scene with the content of placed containers resolved in – what the editor shows. */
viewOf(): SceneAsset;
object(id: string): SceneObject;
/** World position of a scene object, ancestors included. */
world(id: string): Position;
}
export function makeProject(): ProjectFixture {
const project = createEmptyProject('p', 'P');
return { project, stack: new CommandStack(project) };
}
/** A project with a scene "Level" and a 100×100 sprite (named "Box" unless told otherwise), plus lookups into the scene. */
export function makeSpriteScene(spriteName = 'Box'): SceneFixture {
const fixture = makeProject();
const scene = new CreateAssetCommand('scene', 'Level');
const sprite = new CreateAssetCommand('sprite', spriteName);
fixture.stack.execute(scene);
fixture.stack.execute(sprite);
const sceneOf = () => findScene(fixture.project, scene.asset.id)!;
const viewOf = () => resolvedHolder(fixture.project, sceneOf()) as SceneAsset;
const object = (id: string) => findObject(viewOf(), id)!;
return {
...fixture,
sceneId: scene.asset.id,
spriteId: sprite.asset.id,
sceneOf,
viewOf,
object,
world: (id) => worldPosition(fixture.project, viewOf(), object(id)),
};
}
/** Places an asset into the fixture's scene at a world position (optionally below a parent) and returns the new object's id. */
export function place(
fixture: SceneFixture,
assetId: string,
position: Vec2 | Position,
parentId = '',
): string {
const command = new PlaceAssetCommand(fixture.sceneId, assetId, position, parentId);
fixture.stack.execute(command);
return command.objectId;
}
/** Adds a Variables asset declaring the given number variables – what a run shares. */
export function makeVariables(
fixture: ProjectFixture,
name: string,
keys: readonly string[],
): VariablesAsset {
const command = new CreateAssetCommand('variables', name);
fixture.stack.execute(command);
for (const key of keys) fixture.stack.execute(new AddVariableCommand(command.asset.id, key, 'number'));
return command.asset as VariablesAsset;
}
/** Adds a behavior asset declaring the given number variables. */
export function makeBehavior(
fixture: ProjectFixture,
name = 'B',
variables: readonly string[] = [],
): BehaviorAsset {
const command = new CreateAssetCommand('behavior', name);
fixture.stack.execute(command);
for (const key of variables) fixture.stack.execute(new AddVariableCommand(command.asset.id, key, 'number'));
return command.asset as BehaviorAsset;
}
export type Edge = readonly [from: GraphNode, fromPort: string, to: GraphNode, toPort: string];
export interface GraphEditor {
/** Adds a node with inline params (graph coordinates do not matter to tests). */
addNode(type: string, params?: PropertyBag): GraphNode;
/** A Variables node naming `keys`, typed by their declaration; `write` sets all of them or the listed. */
variables(
keys: readonly string[],
options?: { write?: boolean | readonly string[]; params?: PropertyBag },
): GraphNode;
/** A Properties node with `params` (its type) declaring `ports`. */
properties(ports: readonly DeclaredPort[], params?: PropertyBag): GraphNode;
connect(from: GraphNode, fromPort: string, to: GraphNode, toPort: string): void;
wire(edges: readonly Edge[]): void;
}
/** Command-driven editing of one behavior's graph, the way the editor does it. */
export function graphEditor(fixture: ProjectFixture, behavior: BehaviorAsset): GraphEditor {
const { stack } = fixture;
const connect: GraphEditor['connect'] = (from, fromPort, to, toPort) => {
stack.execute(
new ConnectCommand(behavior.id, { node: from.id, port: fromPort }, { node: to.id, port: toPort }),
);
};
return {
addNode(type, params = {}) {
const command = new AddNodeCommand(behavior.id, type, 0, 0, params);
stack.execute(command);
return command.node;
},
variables(keys, { write = false, params = {} } = {}) {
const command = new AddNodeCommand(behavior.id, VARIABLES, 0, 0, params);
stack.execute(command);
const writes = (key: string) => write === true || (Array.isArray(write) && write.includes(key));
const ports = keys.map((key): DeclaredPort => {
// A node pointed at a Variables asset declares that asset's variables, not the behavior's.
const source = fixture.project.assets.find((a) => a.id === params[VARIABLES_PARAM]);
const declarations = source?.type === 'variables' ? source.variables : behavior.variables;
const declared = declarations.find((v) => v.key === key);
const kind = declared ? portKindOf(declared) : 'number';
return writes(key) ? { key, kind, write: true } : { key, kind };
});
if (ports.length > 0) stack.execute(new AddPortsCommand(behavior.id, command.node.id, ports));
return command.node;
},
properties(ports, params = {}) {
const command = new AddNodeCommand(behavior.id, PROPERTIES, 0, 0, params);
stack.execute(command);
if (ports.length > 0) stack.execute(new AddPortsCommand(behavior.id, command.node.id, ports));
return command.node;
},
connect,
wire(edges) {
for (const [from, fromPort, to, toPort] of edges) connect(from, fromPort, to, toPort);
},
};
}
export const NO_POINTER: PointerState = {
x: 0,
y: 0,
inside: false,
down: false,
pressed: false,
released: false,
wheel: 0,
};
/** A top-level entity handle named after itself, with empty props. */
export function fakeEntity(name: string, x = 0, assetId = `asset-${name}`): EntityHandle {
return { [ENTITY_HANDLE]: true, id: name, assetId, name, x, y: 0, z: 0, props: {}, parent: null };
}
/** An entity handle "h" carrying the given props, optionally below a parent. */
export function fakeHandle(props: PropertyBag, parent: EntityHandle | null = null): EntityHandle {
return { [ENTITY_HANDLE]: true, id: 'h', assetId: 'a', name: 'h', x: 0, y: 0, z: 0, props, parent };
}
/** `changes` records the state moves the context was told about, in the order they were reported. */
export type FakeContext = NodeContext & {
logs: string[];
stopped: boolean;
changes: { machineId: string; from: string; to: string }[];
/** What the context was asked to play and to silence, in order – nothing here makes a noise. */
played: { assetId: string; volume: number; loop: boolean | undefined; detached: boolean }[];
silenced: string[];
/** The scenes the context was asked to load, in order. */
loaded: string[];
/** The time scale and the pause the context holds, as the game nodes left them. */
scale: number;
paused: boolean;
};
/** A NodeContext double: self/owner handles, `speed = 100`, dt 0.5, moves applied directly, `log` and `stop` recorded. */
export function fakeContext(overrides: Partial<NodeContext> = {}): FakeContext {
const logs: string[] = [];
const ctx: FakeContext = {
self: fakeEntity('self'),
owner: fakeEntity('owner'),
variables: { speed: 100 },
states: {},
shared: emptySharedState(),
changes: [],
stateChanged: (machineId, from, to) => ctx.changes.push({ machineId, from, to }),
time: 0,
dt: 0.5,
logs,
stopped: false,
findByName: () => null,
isAlive: () => true,
findReferenced: () => null,
childByName: () => null,
objects: () => [],
isKeyDown: () => false,
pointer: { ...NO_POINTER },
hitTest: () => false,
isTouching: () => false,
raycast: () => null,
raycastAll: () => [],
collisionLayerOf: () => null,
ignoreOneWay: () => {},
isTilemap: () => false,
tileAt: () => null,
setTile: () => false,
moveAndSlide: (target, dx, dy) => {
target.x += dx;
target.y += dy;
return { blockedX: false, blockedY: false, hit: false, normal: { x: 0, y: 0 } };
},
log: (message) => logs.push(message),
played: [],
silenced: [],
loaded: [],
playSound: (assetId, volume, loop, detached) => ctx.played.push({ assetId, volume, loop, detached }),
stopSound: (assetId) => ctx.silenced.push(assetId),
loadScene: (sceneId) => ctx.loaded.push(sceneId),
spawn: () => null,
destroy: () => [],
stop: () => {
ctx.stopped = true;
},
restart: () => {},
scale: 1,
paused: false,
timeScale: () => ctx.scale,
setTimeScale: (scale) => {
ctx.scale = scale;
},
isPaused: () => ctx.paused,
setPaused: (paused) => {
ctx.paused = paused;
},
...overrides,
};
return ctx;
}
/** Runs a node on its registered definition: the shape it has while sitting in no graph. */
export function runDef(
type: string,
ctx: NodeContext,
inputs: Record<string, Value>,
params: PropertyBag = {},
entry = 'exec',
lookup: GraphLookup = NO_LOOKUP,
): RunResult {
const def = requireNodeDef(type);
return def.run!(ctx, inputs, params, def, entry, lookup);
}
/**
* Runs every event node of `type` in the graph, in the order the graph holds them, and answers how
* many ran. A game orders its events across all behaviors instead (#264); a test of one graph does not.
*/
export function fire(
interpreter: GraphInterpreter,
type: string,
ctx: NodeContext,
outputs: Record<string, Value> = {},
filter?: (node: GraphNode) => boolean,
): number {
const nodes = interpreter.eventNodes(type).filter((node) => !filter || filter(node));
for (const node of nodes) interpreter.pulse(node, ctx, outputs);
return nodes.length;
}
/** Runs one node definition in isolation and returns its data outputs. */
export function runNode(
type: string,
inputs: Record<string, Value>,
params: PropertyBag = {},
ctx: NodeContext = fakeContext(),
): Record<string, Value> {
return runDef(type, ctx, inputs, params).outputs ?? {};
}
export interface WorldOptions {
collisions?: boolean;
/**
* With `collisions`: the played game's physics engine rather than the editor run's detection
* (#146). The engine has to be loaded first – `await loadPhysics()` in a `beforeAll`.
*/
physics?: boolean;
animations?: boolean;
behaviors?: boolean;
/** Where `Play sound` ends up; without one the run plays to nobody (see `SILENT_AUDIO`). */
audio?: AudioSink;
/** The clock `Set time scale` turns; without one the run is treated like the editor run. */
clock?: TimeScaled;
/** Where persistent Variables assets keep their values; without one nothing outlives the run. */
saves?: SaveArea;
}
export interface StartedWorld {
world: World;
collisions: CollisionSource | null;
behaviors: BehaviorSystem | null;
/** Feed keys with `input.press('a')`; `frame()` clears the edges the way the editor does. */
input: Input;
/** One tick plus the end-of-frame bookkeeping the editor's play loop performs. */
frame(dt?: number): void;
}
/** Instantiates the fixture's scene, optionally with collisions, animations and a BehaviorSystem fed by both. */
export function startWorld(
fixture: SceneFixture,
options: WorldOptions & { collisions: true },
): StartedWorld & { collisions: CollisionSource };
export function startWorld(fixture: SceneFixture, options?: WorldOptions): StartedWorld;
export function startWorld(fixture: SceneFixture, options: WorldOptions = {}): StartedWorld {
const world = World.instantiate(fixture.project, fixture.sceneId);
const collisions = options.collisions
? options.physics
? new PhysicsSystem(readyPhysics() ?? fail('load the physics engine before starting a world with it'))
: new CollisionSystem()
: null;
const input = new Input();
const animations = options.animations ? new AnimationSystem() : null;
if (collisions) world.addSystem(collisions);
if (animations) world.addSystem(animations);
const behaviors = options.behaviors
? new BehaviorSystem(fixture.project, input, {
collisions,
animations,
audio: options.audio,
clock: options.clock,
saves: options.saves,
})
: null;
if (behaviors) world.addSystem(behaviors);
return {
world,
collisions,
behaviors,
input,
frame(dt = 1 / 60) {
world.tick(dt);
input.endFrame();
},
};
}
/**
* Both ways a run detects collisions: the editor run's own and the played game's engine (#146).
* Everything without a rigidbody must come out the same on either.
*/
export const COLLISION_SYSTEMS = [
{ system: 'CollisionSystem', physics: false },
{ system: 'PhysicsSystem', physics: true },
] as const;
function fail(message: string): never {
throw new Error(message);
}
/** The project as it comes back after being saved and loaded again. */
export function roundTrip(project: Project): Project {
return deserializeProject(serializeProject(project));
}