Put a sound in a room, a hall or a cave with a Reverb node (#328)

A sound FX had no space around it. The Reverb node folds the sound
with an impulse response: one it makes itself, or a sound asset as the
answer of a real space. It works on a voice and on a bus.

- Type: Room, Hall, Cave and Plate have fixed numbers. Custom shows
  Decay (up to 10 s), Damping and Pre-delay. Sound shows the pick of a
  sound asset and Pre-delay. The rows are derived ports, the sound pick
  an idle param, so they only appear for their type.
- The made impulse response is seeded noise per side, 60 dB down at
  Decay, through a low-pass closing from 20 kHz toward 500 Hz as far
  as Damping says. It is made once per rate, decay and damping, the
  last 16 are kept.
- A sound as impulse response: the sound FX compilers now get the
  project, so a node can turn a sound asset into its file. The build
  key holds that file, so a cut or swapped sound builds again. The
  instrument compiler does the same for a Reverb inside an instrument.
- The library loads that file with the voice, a sequence or before a
  bus builds its chain. A missing file leaves the reverb silent.
- Mix blends dry and reverb and is the only number that moves while
  the sound plays, as the issue said. The voice rings for pre-delay
  plus decay, or as long as its sound.
- The open point from #325 about sends on project buses is #351, not
  part of this.

Tests:
- Unit reverb (new) 4, soundfx 57 (4 new), sound-library 104 (2 new),
  green.
- Counter-checks, each turns one test red: the impulse file not loaded
  with the voice, the tail without the length of the sound.
- e2e 34 (melektaus-atx): ALL PASSED, 81 checks (1 new). Chrome
  offline: silent during the pre-delay, 35.9 dB fall over 0.6 s of a
  1 s decay (36 expected), the dry half at 0.25 for mix 0.5. A sound
  with one sample at 0.2 s gives the impulse back 0.25 s later and
  nowhere else.
- Gate (melektaus-atx) over the end of this series #318 to #328:
  CHECK EXIT 0, 267 files, 4134 tests.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

src/core/instrument/compile.ts

@@ -18,7 +18,7 @@ import { findAssetOf, type Project } from '../model/Project';
 import { playedSoundOf } from '../properties/playedSound';
 import { resolveAssetProps } from '../properties/resolve';
 import { volumeOf } from '../properties/sounds';
-import { soundFxBuildFor } from '../soundfx/compile';
+import { soundFxBuildFor, soundFxKey } from '../soundfx/compile';
 import {
   type FxAmount,
   type FxChipPlan,
@@ -32,6 +32,8 @@ import {
   SOUND_FX_OUTPUT,
   SoundFxMix,
   type SoundFxNodeDef,
+  type SoundFxProject,
+  SoundFxReverb,
   withPitch,
   withStages,
 } from '../soundfx/nodes';
@@ -83,13 +85,13 @@ export function instrumentSourcesOf(project: Project): InstrumentSources {
     },
     soundFx: (assetId) => {
       const asset = findAssetOf(project, assetId, 'soundfx');
-      return asset ? soundFxBuildFor(asset).compiled : null;
+      return asset ? soundFxBuildFor(asset, project).compiled : null;
     },
     key: (assetId) => {
       const sound = findAssetOf(project, assetId, 'sound');
       if (sound) return `${playedSoundOf(project, sound)}@${volumeOf(resolveAssetProps(project, sound))}`;
       const fx = findAssetOf(project, assetId, 'soundfx');
-      return fx ? graphFingerprint(fx.graph) : '';
+      return fx ? soundFxKey(fx, project) : '';
     },
   };
 }
@@ -130,6 +132,7 @@ export function instrumentParams(graph: Graph): readonly DeclaredPort[] {
  * are numbers here, `velocity` and the parameters stay open for every voice to fill in.
  */
 export function compileInstrument(graph: Graph, note: number, sources: InstrumentSources): InstrumentBuild {
+  const project: SoundFxProject = { soundFile: (assetId) => sources.sound(assetId)?.file ?? '' };
   const walk = graphEmitter<Def, Value>(graph, {
     isDef: isInstrumentDef,
     noun: 'instrument',
@@ -224,10 +227,12 @@ export function compileInstrument(graph: Graph, note: number, sources: Instrumen
       const [a] = plansAt('a');
       const [b] = plansAt('b');
       if (!a || !b) return { out: { plans: a ? [a] : b ? [b] : [] } };
-      return { out: { plans: [def.emit({ a, b }, amounts, node.params)] } };
+      return { out: { plans: [def.emit({ a, b }, amounts, node.params, project)] } };
     }
     const [arriving] = plansAt('in');
-    return { out: arriving ? { plans: [def.emit({ in: arriving }, amounts, node.params)] } : SILENT };
+    return {
+      out: arriving ? { plans: [def.emit({ in: arriving }, amounts, node.params, project)] } : SILENT,
+    };
   }
 
   /** A Sample's sound, or null after saying why it has none – also where its trigger is off. */
@@ -383,7 +388,12 @@ export function instrumentBuildFor(
   sources: InstrumentSources,
 ): InstrumentBuild {
   const named = asset.graph.nodes
-    .map((node) => textOf(node.params[node.type === INSTRUMENT_SOUND_FX ? 'fx' : 'sound'] ?? ''))
+    .flatMap((node) =>
+      node.type === INSTRUMENT_SOUND_FX
+        ? [node.params.fx]
+        : [node.params.sound, ...(node.type === SoundFxReverb.type ? [node.params.impulse] : [])],
+    )
+    .map((id) => textOf(id ?? ''))
     .filter((id) => id !== '');
   const fingerprint = `${graphFingerprint(asset.graph)}|${named.map((id) => sources.key(id)).join('|')}`;
   let cached = builds.get(asset.id);

src/core/music/needs.ts

@@ -17,7 +17,7 @@ export function fxVoiceOf(
   params: FxParams = {},
 ): FxVoice | null {
   const fx = fxId ? findAssetOf(project, fxId, 'soundfx') : undefined;
-  const plan = fx && soundFxBuildFor(fx).compiled;
+  const plan = fx && soundFxBuildFor(fx, project).compiled;
   return plan ? { plan, params, tempo } : null;
 }
 

src/core/soundfx/compile.ts

@@ -5,6 +5,9 @@ import { NO_LOOKUP } from '../graph/lookup';
 import { inlineValue, nodeDef } from '../graph/NodeRegistry';
 import { asNumber } from '../graph/values';
 import type { SoundFxAsset } from '../model/Asset';
+import { textOf } from '../model/Properties';
+import type { Project } from '../model/Project';
+import { playedSoundById } from '../properties/playedSound';
 import {
   EMPTY_PLAN,
   type FxAmount,
@@ -13,6 +16,7 @@ import {
   SOUND_FX_INPUT,
   SOUND_FX_OUTPUT,
   type SoundFxNodeDef,
+  type SoundFxProject,
 } from './nodes';
 
 export interface SoundFxBuild {
@@ -47,7 +51,7 @@ function inputOutputs(node: GraphNode): Record<string, FxValue> {
  * (#316); a node fed from nowhere is a problem rather than silence. A number fed from a parameter
  * stays open in the plan until a voice is started (#311).
  */
-export function compileSoundFx(graph: Graph): SoundFxBuild {
+export function compileSoundFx(graph: Graph, project?: SoundFxProject): SoundFxBuild {
   const walk = graphEmitter<SoundFxNodeDef, FxValue>(graph, {
     isDef: isSoundFxNodeDef,
     noun: 'sound FX',
@@ -60,7 +64,7 @@ export function compileSoundFx(graph: Graph): SoundFxBuild {
       for (const [key, value] of Object.entries(inputs))
         if ('amount' in value) amounts[key] = value.amount;
         else sounds[key] = value.plan;
-      return { out: { plan: def.emit(sounds, amounts, node.params) } };
+      return { out: { plan: def.emit(sounds, amounts, node.params, project) } };
     },
     unfed: (node, port) => {
       if (port.type === 'number') return { amount: { value: asNumber(inlineValue(node, port)) } };
@@ -91,15 +95,36 @@ export function compileSoundFx(graph: Graph): SoundFxBuild {
 
 const builds = new Map<string, { fingerprint: string; build: SoundFxBuild }>();
 
+/** The sounds a graph names as the impulse response of a Reverb (#328), by asset id. */
+function impulseIds(graph: Graph): string[] {
+  return graph.nodes.flatMap((node) => {
+    const id = node.type === 'SoundFxReverb' ? textOf(node.params.impulse ?? '') : '';
+    return id ? [id] : [];
+  });
+}
+
+/**
+ * What a build of the asset is made of: its graph, and the files of the sounds it names, which
+ * change when one of them is cut or swapped.
+ */
+export function soundFxKey(asset: SoundFxAsset, project?: Project): string {
+  const files = project ? impulseIds(asset.graph).map((id) => playedSoundById(project, id)) : [];
+  return `${graphFingerprint(asset.graph)}|${files.join('|')}`;
+}
+
 /**
  * The asset's build, compiled again only when what it does has changed – a voice is started far
- * more often than its graph is edited, and a moved node changes nothing.
+ * more often than its graph is edited, and a moved node changes nothing. Without `project` a
+ * Reverb that takes a sound has none.
  */
-export function soundFxBuildFor(asset: SoundFxAsset): SoundFxBuild {
-  const fingerprint = graphFingerprint(asset.graph);
+export function soundFxBuildFor(asset: SoundFxAsset, project?: Project): SoundFxBuild {
+  const fingerprint = soundFxKey(asset, project);
   const cached = builds.get(asset.id);
   if (cached && cached.fingerprint === fingerprint) return cached.build;
-  const build = compileSoundFx(asset.graph);
+  const build = compileSoundFx(
+    asset.graph,
+    project && { soundFile: (assetId) => playedSoundById(project, assetId) },
+  );
   builds.set(asset.id, { fingerprint, build });
   return build;
 }

src/core/soundfx/nodes.ts

@@ -1,12 +1,13 @@
 import type { DeclaredPort } from '../graph/Graph';
 import { SOUND_FX_INPUT, SOUND_FX_OUTPUT } from '../graph/nested';
 import type { NodeDef, PortDef } from '../graph/NodeRegistry';
-import type { PropertyBag } from '../model/Properties';
+import { type PropertyBag, textOf } from '../model/Properties';
 import { DEFAULT_TEMPO, heldTempo, secondsOfQuarters } from '../music/time';
 import type { FlatDef } from '../properties/PropertySchema';
 import type { ChipShape, ChipWave } from './chip';
 import { COMPRESSOR_LATENCY, compressorMakeup, limiterLatency } from './dynamics';
 import { LFO_SHAPES, type LfoShape, vibratoDelay } from './lfo';
+import { REVERB_MAX_DECAY, REVERB_PRESETS, REVERB_ROOMS, type ReverbRoom } from './reverb';
 import {
   SATURATION_TYPES,
   saturationAutoGain,
@@ -44,7 +45,21 @@ export type FxStage =
   | FxLimit
   | FxSaturate
   | FxLfo<'tremolo'>
-  | FxLfo<'vibrato'>;
+  | FxLfo<'vibrato'>
+  | FxReverb;
+
+/**
+ * A Reverb (#328): the decay and damping its impulse response is made with, or the file of a sound
+ * that is its impulse response; the pre-delay before it, and how much of it is heard.
+ */
+export interface FxReverb {
+  kind: 'reverb';
+  decay: number;
+  damping: number;
+  predelay: number;
+  mix: number;
+  impulse?: string;
+}
 
 /** A Tremolo or a Vibrato (#320): its shape, its rate in Hz, its depth (0 to 1, or semitones). */
 export interface FxLfo<K extends 'tremolo' | 'vibrato' = 'tremolo' | 'vibrato'> {
@@ -289,7 +304,8 @@ export type FxStagePlan =
       FxAmount
     >)
   | { kind: 'tremolo'; shape: LfoShape; rate: FxAmount; depth: FxAmount }
-  | { kind: 'vibrato'; shape: LfoShape; rate: FxAmount; depth: FxAmount };
+  | { kind: 'vibrato'; shape: LfoShape; rate: FxAmount; depth: FxAmount }
+  | ({ kind: 'reverb'; impulse?: string } & Record<'decay' | 'damping' | 'predelay' | 'mix', FxAmount>);
 
 /** A chain with its parameters still open: compiled once, filled in for every voice by `fxChainOf`. */
 export type FxPlan =
@@ -324,9 +340,15 @@ export interface SoundFxNodeDef extends NodeDef {
     sounds: Readonly<Record<string, FxPlan>>,
     amounts: Readonly<Record<string, FxAmount>>,
     settings: PropertyBag,
+    project?: SoundFxProject,
   ): FxPlan;
 }
 
+/** What a node reaches of the project around it: the file a sound asset plays (#328), '' for none. */
+export interface SoundFxProject {
+  soundFile(assetId: string): string;
+}
+
 export function isSoundFxNodeDef(def: NodeDef): def is SoundFxNodeDef {
   return def.category === 'sound' && 'emit' in def;
 }
@@ -973,6 +995,63 @@ export const SoundFxVibrato: SoundFxNodeDef = {
   },
 };
 
+const REVERB_ROOM = {
+  key: 'room',
+  label: 'Type',
+  kind: 'enum' as const,
+  default: 'room',
+  options: REVERB_ROOMS,
+};
+const IMPULSE = { key: 'impulse', label: 'Sound', kind: 'sound' as const, default: '' };
+const REVERB_DECAY = { ...numberRow('decay', 'Decay (s)', 0.1, REVERB_MAX_DECAY, 0.01), default: 1.5 };
+const REVERB_DAMPING = { ...numberRow('damping', 'Damping', 0, 1, 0.01), default: 0.4 };
+const PREDELAY = { ...numberRow('predelay', 'Pre-delay (s)', 0, 0.5, 0.001), default: 0.01 };
+const REVERB_MIX = { ...numberRow('mix', 'Mix', 0, 1, 0.01), default: 0.3 };
+export const REVERB_ROWS = {
+  decay: REVERB_DECAY,
+  damping: REVERB_DAMPING,
+  predelay: PREDELAY,
+  mix: REVERB_MIX,
+};
+
+export function reverbRoomOf(settings: PropertyBag): ReverbRoom {
+  return REVERB_ROOMS.find((option) => option.value === settings[REVERB_ROOM.key])?.value ?? 'room';
+}
+
+export const SoundFxReverb: SoundFxNodeDef = {
+  type: 'SoundFxReverb',
+  label: 'Reverb',
+  category: 'sound',
+  description:
+    'The sound in a space, from a small room to a cave. "Type" is a space with its own decay, damping and pre-delay (Room, Hall, Cave, Plate), Custom to set them yourself, or Sound to take a sound asset as the impulse response of a real space. "decay" (s, up to 10) is how long the reverb takes to fall by 60 dB, "damping" from 0 to 1 how much faster its highs fall, "pre-delay" (s) how long it waits before it starts. "mix" is how much of it is heard instead of the sound itself: 1 is the reverb alone, for a bus that only carries reverb. Only the mix can change while the sound plays; the rest is set when the sound starts, on a bus when it gets its FX. The sound lasts until the reverb has faded.',
+  inputs: [audioIn, numberIn(REVERB_MIX)],
+  outputs: [audioOut],
+  params: [REVERB_ROOM, IMPULSE],
+  idleParams: (params) => (reverbRoomOf(params) === 'sound' ? [] : [IMPULSE.key]),
+  derivePorts: ({ node }) => {
+    const room = reverbRoomOf(node.params);
+    if (room === 'custom') return { inputs: [REVERB_DECAY, REVERB_DAMPING, PREDELAY].map(numberIn) };
+    return room === 'sound' ? { inputs: [numberIn(PREDELAY)] } : {};
+  },
+  emit: (sounds, amounts, settings, project) => {
+    const mix = held(amounts.mix, REVERB_MIX);
+    if (isNone(mix)) return arriving(sounds);
+    const room = reverbRoomOf(settings);
+    const preset = room === 'custom' || room === 'sound' ? null : REVERB_PRESETS[room];
+    const impulse = room === 'sound' ? (project?.soundFile(textOf(settings[IMPULSE.key] ?? '')) ?? '') : '';
+    return withStages(arriving(sounds), [
+      {
+        kind: 'reverb',
+        decay: preset ? { value: preset.decay } : held(amounts.decay, REVERB_DECAY),
+        damping: preset ? { value: preset.damping } : held(amounts.damping, REVERB_DAMPING),
+        predelay: preset ? { value: preset.predelay } : held(amounts.predelay, PREDELAY),
+        mix,
+        ...(impulse && { impulse }),
+      },
+    ]);
+  },
+};
+
 /** Where damping 0 leaves the echoes and damping 1 takes them: evenly in octaves between. */
 const UNDAMPED_HZ = 20000;
 const DAMPED_HZ = 500;
@@ -999,6 +1078,7 @@ export const SOUND_FX_NODES: readonly SoundFxNodeDef[] = [
   SoundFxSaturation,
   SoundFxTremolo,
   SoundFxVibrato,
+  SoundFxReverb,
 ];
 
 /** An amount with the value handed in for its parameter, held to its row; a 0 there does nothing. */
@@ -1153,6 +1233,17 @@ function stagesOf(plan: FxPlan, params: FxParams, tempo: number): FxStage[] {
       });
       continue;
     }
+    if (stage.kind === 'reverb') {
+      stages.push({
+        kind: 'reverb',
+        decay: amountOf(stage.decay, params),
+        damping: amountOf(stage.damping, params),
+        predelay: amountOf(stage.predelay, params),
+        mix: amountOf(stage.mix, params),
+        ...(stage.impulse && { impulse: stage.impulse }),
+      });
+      continue;
+    }
     if (stage.kind === 'tremolo') {
       const lfo = { shape: stage.shape, rate: amountOf(stage.rate, params) };
       stages.push({ kind: 'tremolo', ...lfo, depth: amountOf(stage.depth, params) / 100 });
@@ -1247,7 +1338,7 @@ function chipOf(plan: FxChipPlan, params: FxParams): FxChip {
 }
 
 /** The stages that sound on after their input ends: an echo, and what holds the sound back on the worklet. */
-const RINGING: ReadonlySet<FxStagePlan['kind']> = new Set(['delay', 'limit', 'vibrato']);
+const RINGING: ReadonlySet<FxStagePlan['kind']> = new Set(['delay', 'limit', 'vibrato', 'reverb']);
 
 /** Whether a plan can ring on after its sources end (#324): it has an echo somewhere, or a Limiter. */
 export function fxRings(plan: FxPlan): boolean {
@@ -1262,10 +1353,28 @@ const SILENT = 1e-3;
  * How many seconds a chain rings on after its sources end (#324), at the values it has now: until
  * its last echo is 60 dB below the sound. Damping only makes echoes quieter, so it is left out and
  * the tail is never too short. Echoes behind each other add up, two ways of a Mix take the longer.
+ * A Reverb (#328) rings its pre-delay and its decay, or as long as the sound that is its impulse
+ * response – `soundLength` says how long that is, the longest a Reverb may ring where it is unknown.
  */
-export function fxTailOf(chain: FxChain): number {
-  const ways = 'mix' in chain ? Math.max(fxTailOf(chain.a), fxTailOf(chain.b)) : 0;
-  return chain.stages.reduce((sum, stage) => sum + (stage.kind === 'delay' ? delayTail(stage) : 0), ways);
+export function fxTailOf(
+  chain: FxChain,
+  soundLength: (file: string) => number = () => REVERB_MAX_DECAY,
+): number {
+  const ways = 'mix' in chain ? Math.max(fxTailOf(chain.a, soundLength), fxTailOf(chain.b, soundLength)) : 0;
+  return chain.stages.reduce((sum, stage) => {
+    if (stage.kind === 'delay') return sum + delayTail(stage);
+    if (stage.kind === 'reverb')
+      return sum + stage.predelay + (stage.impulse ? soundLength(stage.impulse) : stage.decay);
+    return sum;
+  }, ways);
+}
+
+/** The files the Reverbs of a plan take as their impulse response (#328). */
+export function impulsesOf(plan: FxPlan): string[] {
+  const own = plan.stages.flatMap((stage) =>
+    stage.kind === 'reverb' && stage.impulse ? [stage.impulse] : [],
+  );
+  return 'mix' in plan ? [...impulsesOf(plan.a), ...impulsesOf(plan.b), ...own] : own;
 }
 
 /**

src/core/soundfx/reverb.ts

@@ -0,0 +1,71 @@
+/**
+ * A Reverb (#328): a ConvolverNode with an impulse response made here – noise that has fallen by
+ * 60 dB after `decay` seconds, its highs falling faster by `damping` – or a sound of the project.
+ */
+
+export type ReverbRoom = 'room' | 'hall' | 'cave' | 'plate' | 'custom' | 'sound';
+
+export const REVERB_ROOMS: { value: ReverbRoom; label: string }[] = [
+  { value: 'room', label: 'Room' },
+  { value: 'hall', label: 'Hall' },
+  { value: 'cave', label: 'Cave' },
+  { value: 'plate', label: 'Plate' },
+  { value: 'custom', label: 'Custom' },
+  { value: 'sound', label: 'Sound' },
+];
+
+/** Decay in seconds, damping from 0 to 1, pre-delay in seconds. */
+export interface ReverbShape {
+  decay: number;
+  damping: number;
+  predelay: number;
+}
+
+export const REVERB_PRESETS: Record<'room' | 'hall' | 'cave' | 'plate', ReverbShape> = {
+  room: { decay: 0.6, damping: 0.5, predelay: 0.005 },
+  hall: { decay: 2.5, damping: 0.35, predelay: 0.02 },
+  cave: { decay: 5, damping: 0.15, predelay: 0.04 },
+  plate: { decay: 1.6, damping: 0.1, predelay: 0 },
+};
+
+/** The longest a Reverb may ring, as the issue set it. */
+export const REVERB_MAX_DECAY = 10;
+
+/** Where the highs of a fully damped tail have fallen to by its end, and an undamped one stays. */
+const OPEN_HZ = 20000;
+const DAMPED_HZ = 500;
+
+/** A small, fast generator, so every voice gets the same noise and a check the same numbers. */
+function noise(seed: number): () => number {
+  let state = seed >>> 0;
+  return () => {
+    state = (state + 0x6d2b79f5) >>> 0;
+    let t = state;
+    t = Math.imul(t ^ (t >>> 15), t | 1);
+    t ^= t + Math.imul(t ^ (t >>> 7), t | 61);
+    return (((t ^ (t >>> 14)) >>> 0) / 4294967296) * 2 - 1;
+  };
+}
+
+/**
+ * The impulse response of a Reverb, one channel per side, each its own noise: `decay` seconds long,
+ * 60 dB down by its end, and through a low-pass that closes from 20 kHz towards 500 Hz over that
+ * time as far as `damping` says.
+ */
+export function reverbImpulse(sampleRate: number, decay: number, damping: number): Float32Array[] {
+  const length = Math.max(1, Math.round(Math.min(REVERB_MAX_DECAY, Math.max(0.01, decay)) * sampleRate));
+  const shut = Math.max(0, Math.min(1, damping));
+  return [1, 2].map((seed) => {
+    const next = noise(seed);
+    const out = new Float32Array(length);
+    let low = 0;
+    for (let i = 0; i < length; i++) {
+      const t = i / length;
+      const cutoff = OPEN_HZ * (DAMPED_HZ / OPEN_HZ) ** (shut * t);
+      const keep = Math.exp((-2 * Math.PI * cutoff) / sampleRate);
+      low = (1 - keep) * next() + keep * low;
+      out[i] = low * 10 ** (-3 * t);
+    }
+    return out;
+  });
+}

src/editor/debugHook.ts

@@ -82,10 +82,11 @@ export function installDebugHook(app: Application, state: EditorState, editor: E
       sampleRate: () => soundLibrary.liveContext().sampleRate,
       /**
        * The nodes a stage of a voice becomes, in any context – an offline one renders what it does.
-       * `at` is when its voice starts, which a Flanger's sweep counts from (#341).
+       * `at` is when its voice starts, which a Flanger's sweep counts from (#341), `impulse` the
+       * sound a Reverb that takes one has (#328).
        */
-      stageNodes: (context: BaseAudioContext, stage: FxStage, at?: number) =>
-        stageNodes(context, stage, undefined, at),
+      stageNodes: (context: BaseAudioContext, stage: FxStage, at?: number, impulse?: AudioBuffer) =>
+        stageNodes(context, stage, undefined, at, impulse),
       /** The gain in dB a Saturation's auto-gain gives at a drive (#323). */
       saturationAutoGain,
       /** What drives the two shares of a Mix "Both at center", in any context (unstarted). */

src/editor/graph/GraphCanvas.ts

@@ -311,7 +311,7 @@ export class GraphCanvas extends Widget {
         : asset.type === 'particles'
           ? particleLibrary.buildFor(asset).problems
           : asset.type === 'soundfx'
-            ? soundFxBuildFor(asset).problems
+            ? soundFxBuildFor(asset, this.state.project).problems
             : asset.type === 'instrument'
               ? instrumentCheck(asset, instrumentSourcesOf(this.state.project)).problems
               : asset.type === 'song'

src/editor/soundfx/SoundFxEditor.ts

@@ -100,7 +100,7 @@ export class SoundFxEditor extends AssetTabEditor<SoundFxAsset, GraphCanvas> {
   play(): void {
     const asset = this.asset();
     const sound = findAssetOf(this.state.project, this.previewSoundId, 'sound');
-    const plan = asset && soundFxBuildFor(asset).compiled;
+    const plan = asset && soundFxBuildFor(asset, this.state.project).compiled;
     if (!sound?.file || !plan) return;
     const props = resolveAssetProps(this.state.project, sound);
     const fx = { plan, params: { ...this.values } };
@@ -123,7 +123,7 @@ export class SoundFxEditor extends AssetTabEditor<SoundFxAsset, GraphCanvas> {
   }
 
   protected override infoText(asset: SoundFxAsset): string {
-    const build = soundFxBuildFor(asset);
+    const build = soundFxBuildFor(asset, this.state.project);
     if (!build.compiled) return build.reason;
     return `${build.effects} ${build.effects === 1 ? 'effect' : 'effects'}`;
   }
@@ -133,7 +133,9 @@ export class SoundFxEditor extends AssetTabEditor<SoundFxAsset, GraphCanvas> {
     const sound = findAssetOf(this.state.project, this.previewSoundId, 'sound');
     this.soundPicker.setText(sound?.name ?? 'No sound');
     this.soundPicker.setEnabled(Boolean(asset && sound));
-    this.playButton.setEnabled(Boolean(asset && sound?.file && soundFxBuildFor(asset).compiled));
+    this.playButton.setEnabled(
+      Boolean(asset && sound?.file && soundFxBuildFor(asset, this.state.project).compiled),
+    );
     this.stopButton.setEnabled(Boolean(asset));
     this.syncParams(asset);
   }

src/runtime/systems/behaviorContext.ts

@@ -288,7 +288,7 @@ function playSound(
   const props = resolveAssetProps(project, asset);
   const level = Math.max(0, Math.min(1, volumeOf(props) * volume));
   const fx = fxId ? findAssetOf(project, fxId, 'soundfx') : undefined;
-  const plan = fx && soundFxBuildFor(fx).compiled;
+  const plan = fx && soundFxBuildFor(fx, project).compiled;
   return audio.play(
     playedSoundOf(project, asset),
     level,

src/viewport/SoundLibrary.ts

@@ -16,9 +16,11 @@ import {
   type FxMod,
   type FxPass,
   type FxPhaser,
+  type FxReverb,
   type FxSaturate,
   fxRings,
   fxTailOf,
+  impulsesOf,
   type FxParams,
   type FxPlan,
   type FxStage,
@@ -38,6 +40,7 @@ import { DEFAULT_TEMPO } from '../core/music/time';
 import { type CutRange, cutChannels, cutRange, parseCutName } from '../core/model/sound';
 import { shifterLatency } from '../core/soundfx/pitchPlayer';
 import { LFO_SHAPES } from '../core/soundfx/lfo';
+import { REVERB_MAX_DECAY, reverbImpulse } from '../core/soundfx/reverb';
 import { driveGain, saturationCurve, SHAPER_LATENCY_FRAMES } from '../core/soundfx/saturation';
 import type { AudioSink, ClipTiming, NoteTiming } from '../runtime/systems/Audio';
 import type { ChipOptions, FlangerOptions, LfoOptions, PhaserOptions, PitchOptions } from './fxWorklet';
@@ -678,7 +681,10 @@ export class SoundLibrary implements AudioSink {
     bus.fx = fx;
     this.unchain(bus);
     if (!fx) return;
-    if (needsWorklet(fx.plan)) await this.fxWorklet();
+    await Promise.all([
+      needsWorklet(fx.plan) ? this.fxWorklet() : null,
+      ...impulsesOf(fx.plan).map((file) => this.load(file)),
+    ]);
     if (bus.fx === fx && !bus.chain) this.chain(bus);
   }
 
@@ -766,7 +772,8 @@ export class SoundLibrary implements AudioSink {
     for (const stage of chain.stages) {
       // A sound FX has no Envelope; one would only silence the bus.
       if (stage.kind === 'envelope') continue;
-      const stageMade = stageNodes(context, stage, undefined, context.currentTime);
+      const impulse = stage.kind === 'reverb' && stage.impulse ? this.buffer(stage.impulse) : null;
+      const stageMade = stageNodes(context, stage, undefined, context.currentTime, impulse);
       latency += stageLatency(stage, context.sampleRate);
       tail.connect(stageMade.input);
       tail = stageMade.output;
@@ -812,7 +819,8 @@ export class SoundLibrary implements AudioSink {
    */
   private ringOf(name: string): number {
     const fx = this.buses.get(name)?.fx;
-    const tail = fx && fxRings(fx.plan) ? fxTailOf(fxChainOf(fx.plan, fx.params, fx.tempo)) : 0;
+    const tail =
+      fx && fxRings(fx.plan) ? fxTailOf(fxChainOf(fx.plan, fx.params, fx.tempo), this.soundLength) : 0;
     return tail + this.busLatency(name);
   }
 
@@ -1032,7 +1040,9 @@ export class SoundLibrary implements AudioSink {
   private begin(start: Start): number {
     const id = this.nextId++;
     const asked: Start = { ...start, id };
-    const loaded = start.files.every((file) => this.buffer(file) !== null);
+    // A Reverb's sound (#328) is waited for as well, but a voice is not silent for lack of it.
+    const impulseFiles = start.fx.layers.flatMap(impulsesOf);
+    const loaded = [...start.files, ...impulseFiles].every((file) => this.buffer(file) !== null);
     const worklet = start.fx.layers.some(needsWorklet) ? this.fxWorklet() : null;
     if (loaded && (!worklet || this.hasWorklet !== null)) {
       this.start(asked);
@@ -1048,7 +1058,9 @@ export class SoundLibrary implements AudioSink {
       released: false,
     };
     this.pending.push(waiting);
-    void Promise.all([Promise.all(start.files.map((file) => this.load(file))), worklet]).then(([buffers]) => {
+    const impulsesLoaded = Promise.all(impulseFiles.map((file) => this.load(file)));
+    void Promise.all([Promise.all(start.files.map((file) => this.load(file))), worklet, impulsesLoaded]).then(
+      ([buffers]) => {
         this.pending = this.pending.filter((other) => other !== waiting);
         // A `Stop sound` – or the destruction of the behavior that asked – that happened while the
         // bytes were in flight has to win, or a sound the run already ended would start afterwards.
@@ -1058,7 +1070,8 @@ export class SoundLibrary implements AudioSink {
         this.start({ ...asked, fx: waiting.fx });
         for (const { params, time, ease } of waiting.timed) this.tune(id, params, time, ease);
         if (waiting.released) this.release(id);
-    });
+      },
+    );
     return id;
   }
 
@@ -1251,7 +1264,7 @@ export class SoundLibrary implements AudioSink {
    */
   async prepare(layers: readonly FxPlan[], files: readonly string[] = []): Promise<void> {
     await Promise.all([
-      ...[...new Set([...layers.flatMap(filesOf), ...files])]
+      ...[...new Set([...layers.flatMap(filesOf), ...layers.flatMap(impulsesOf), ...files])]
         .filter((file) => file !== '')
         .map((file) => this.load(file)),
       layers.some(needsWorklet) ? this.fxWorklet() : null,
@@ -1441,7 +1454,7 @@ export class SoundLibrary implements AudioSink {
     return fx.layers.reduce((longest, plan) => {
       if (!fxRings(plan)) return longest;
       const chain = fxChainOf(plan, fx.params, fx.tempo);
-      return Math.max(longest, fxTailOf(chain) + fxLatencyOf(chain, rate));
+      return Math.max(longest, fxTailOf(chain, this.soundLength) + fxLatencyOf(chain, rate));
     }, 0);
   }
 
@@ -1503,7 +1516,7 @@ export class SoundLibrary implements AudioSink {
       at: when,
       // Held here, not looked up later: a cut can be let go while its voice plays.
       buffers: new Map(
-        files.flatMap((name) => {
+        [...files, ...fx.layers.flatMap(impulsesOf)].flatMap((name) => {
           const buffer = this.buffer(name);
           return buffer ? [[name, buffer] as const] : [];
         }),
@@ -1611,7 +1624,9 @@ export class SoundLibrary implements AudioSink {
     const under = wiring.sources.slice(first);
     for (const stage of chain.stages) {
       if (stage.kind === 'envelope') this.envelope(wiring, stage.envelope).sources.push(...under);
-      const made = stageNodes(context, stage, follow, wiring.at);
+      const impulse =
+        stage.kind === 'reverb' && stage.impulse ? (wiring.buffers.get(stage.impulse) ?? null) : null;
+      const made = stageNodes(context, stage, follow, wiring.at, impulse);
       tail.connect(made.input);
       tail = made.output;
       knobs.push(...made.knobs);
@@ -1861,6 +1876,9 @@ export class SoundLibrary implements AudioSink {
     return { whole, ...cutRange(whole.length, whole.sampleRate, cut) };
   }
 
+  /** How long a sound a Reverb takes as its impulse response rings (#328): all it may, while unknown. */
+  private readonly soundLength = (file: string): number => this.duration(file) ?? REVERB_MAX_DECAY;
+
   /** Whether the file of a name could not be had: a cut of it cannot either. */
   private hasFailed(name: string): boolean {
     return this.failed.has(parseCutName(name).file);
@@ -2045,6 +2063,7 @@ export function stageNodes(
   stage: FxStage,
   follow?: Follow,
   at = context.currentTime,
+  impulse: AudioBuffer | null = null,
 ): StageNodes {
   if (stage.kind === 'gain') {
     const gain = gainNode(context, stage.mod ? 0 : stage.gain);
@@ -2064,6 +2083,7 @@ export function stageNodes(
   if (stage.kind === 'flanger') return flangerNodes(context, stage, at, follow);
   if (stage.kind === 'compress') return compressNodes(context, stage);
   if (stage.kind === 'saturate') return saturateNodes(context, stage);
+  if (stage.kind === 'reverb') return reverbNodes(context, stage, impulse);
   if (stage.kind === 'tremolo' || stage.kind === 'vibrato') return lfoNodes(context, stage, at);
   if (stage.kind === 'limit')
     return workletNodes(context, 'limiter', [
@@ -2238,6 +2258,52 @@ function lfoNodes(context: BaseAudioContext, stage: FxLfo, at: number): StageNod
   );
 }
 
+/** Impulse responses made for a Reverb, by rate, decay and damping: the last few are kept. */
+const impulses = new Map<string, AudioBuffer>();
+const KEPT_IMPULSES = 16;
+
+/** The impulse response a Reverb makes for itself (#328), made once for these numbers. */
+function madeImpulse(context: BaseAudioContext, decay: number, damping: number): AudioBuffer {
+  const key = `${context.sampleRate}|${decay}|${damping}`;
+  let buffer = impulses.get(key);
+  if (!buffer) {
+    const channels = reverbImpulse(context.sampleRate, decay, damping);
+    buffer = context.createBuffer(channels.length, channels[0]!.length, context.sampleRate);
+    channels.forEach((data, c) => buffer!.copyToChannel(data as Float32Array<ArrayBuffer>, c));
+    impulses.set(key, buffer);
+    if (impulses.size > KEPT_IMPULSES) impulses.delete(impulses.keys().next().value!);
+  }
+  return buffer;
+}
+
+/**
+ * A Reverb (#328): the sound itself, and beside it through the pre-delay into a ConvolverNode with
+ * the impulse response made for it – or the one of a sound, `impulse`, where it takes a sound; a
+ * sound not loaded leaves the reverb silent. Only the mix moves while it plays.
+ */
+function reverbNodes(context: BaseAudioContext, stage: FxReverb, impulse: AudioBuffer | null): StageNodes {
+  const input = context.createGain();
+  const output = context.createGain();
+  const convolver = context.createConvolver();
+  const buffer = stage.impulse ? impulse : madeImpulse(context, stage.decay, stage.damping);
+  if (buffer) convolver.buffer = buffer;
+  const wet = gainNode(context, stage.mix);
+  const dry = gainNode(context, 1 - stage.mix);
+  heldBack(context, input, stage.predelay).connect(convolver).connect(wet).connect(output);
+  input.connect(dry).connect(output);
+  return {
+    input,
+    output,
+    knobs: [
+      { param: null, target: stage.decay, even: 'value' },
+      { param: null, target: stage.damping, even: 'value' },
+      { param: null, target: stage.predelay, even: 'value' },
+      { param: wet.gain, target: stage.mix, even: 'value' },
+      { param: dry.gain, target: 1 - stage.mix, even: 'value' },
+    ],
+  };
+}
+
 /** Below what a Saturation takes out the DC its bent sound gained (#323). */
 const DC_BLOCK_HZ = 10;
 
@@ -2569,6 +2635,8 @@ function levelsOf(chain: FxChain, into: number[] = []): number[] {
       into.push(stage.threshold, stage.knee, stage.ratio, stage.attack, stage.release, stage.gain);
     else if (stage.kind === 'limit') into.push(stage.threshold, stage.ceiling, stage.release, stage.autoGain);
     else if (stage.kind === 'tremolo' || stage.kind === 'vibrato') into.push(stage.rate, stage.depth);
+    else if (stage.kind === 'reverb')
+      into.push(stage.decay, stage.damping, stage.predelay, stage.mix, 1 - stage.mix);
     else if (stage.kind === 'saturate')
       into.push(driveGain(stage.drive), stage.tone, stage.level, stage.mix, 1 - stage.mix);
     else if (stage.kind !== 'envelope') into.push(stage.gain);

tests/core/reverb.test.ts

@@ -0,0 +1,53 @@
+/** A Reverb (#328): the impulse response it makes for itself. */
+import { describe, expect, it } from 'vitest';
+import { REVERB_MAX_DECAY, REVERB_PRESETS, reverbImpulse } from '../../src/core/soundfx/reverb';
+
+const RATE = 48000;
+
+/** The RMS of a stretch of samples, in dB. */
+function db(data: Float32Array, from: number, to: number): number {
+  let sum = 0;
+  for (let i = from; i < to; i++) sum += data[i]! ** 2;
+  return 10 * Math.log10(sum / (to - from));
+}
+
+/** The share of a stretch's energy that is above a few kHz: what is left after a two-tap average. */
+function highShare(data: Float32Array, from: number, to: number): number {
+  let all = 0;
+  let high = 0;
+  for (let i = from + 1; i < to; i++) {
+    all += data[i]! ** 2;
+    high += ((data[i]! - data[i - 1]!) / 2) ** 2;
+  }
+  return high / all;
+}
+
+describe('the impulse response of a Reverb', () => {
+  it('lasts its decay and falls by 60 dB over it, two channels of their own noise', () => {
+    const [left, right] = reverbImpulse(RATE, 2, 0);
+    expect(left!.length).toBe(2 * RATE);
+    expect(left).not.toEqual(right);
+    // A tenth of the way at the start and at the end: 54 dB apart, 6 dB a tenth.
+    expect(db(left!, 0, RATE / 5) - db(left!, (9 * RATE) / 5, 2 * RATE)).toBeCloseTo(54, 0);
+  });
+
+  it('is the same every time, and never longer than 10 s', () => {
+    expect(reverbImpulse(RATE, 1, 0.5)).toEqual(reverbImpulse(RATE, 1, 0.5));
+    expect(reverbImpulse(RATE, 60, 0)[0]!.length).toBe(REVERB_MAX_DECAY * RATE);
+  });
+
+  it('loses its highs faster with damping', () => {
+    const [open] = reverbImpulse(RATE, 1, 0);
+    const [damped] = reverbImpulse(RATE, 1, 1);
+    const late = [0.8 * RATE, RATE] as const;
+    expect(highShare(damped!, ...late)).toBeLessThan(highShare(open!, ...late) / 4);
+    // At the start both are open.
+    expect(highShare(damped!, 0, RATE / 20)).toBeCloseTo(highShare(open!, 0, RATE / 20), 1);
+  });
+
+  it('has four spaces from a small room to a cave', () => {
+    expect(Object.keys(REVERB_PRESETS)).toEqual(['room', 'hall', 'cave', 'plate']);
+    expect(REVERB_PRESETS.room.decay).toBeLessThan(REVERB_PRESETS.hall.decay);
+    expect(REVERB_PRESETS.hall.decay).toBeLessThan(REVERB_PRESETS.cave.decay);
+  });
+});

tests/core/soundfx.test.ts

@@ -25,6 +25,8 @@ import {
   type FxStage,
   fxTailOf,
   type FxVoice,
+  impulsesOf,
+  SoundFxReverb,
   stageLatency,
 } from '../../src/core/soundfx/nodes';
 import { saturationAutoGain } from '../../src/core/soundfx/saturation';
@@ -43,6 +45,7 @@ import {
 } from '../helpers';
 
 const FILE = `${'a1'.repeat(32)}.wav`;
+const OTHER_FILE = `${'b2'.repeat(32)}.wav`;
 
 /** The level of a gain or filter stage. */
 const gainOf = (stage: FxStage | undefined) => (stage && 'gain' in stage ? stage.gain : undefined);
@@ -133,6 +136,7 @@ describe('the sound FX asset', () => {
       'SoundFxSaturation',
       'SoundFxTremolo',
       'SoundFxVibrato',
+      'SoundFxReverb',
     ]);
     f.edit.addNode('SoundFxInput');
     f.edit.addNode('SoundFxOutput');
@@ -152,6 +156,7 @@ describe('the sound FX asset', () => {
       'SoundFxSaturation',
       'SoundFxTremolo',
       'SoundFxVibrato',
+      'SoundFxReverb',
     ]);
 
     const behavior = makeBehavior(f, 'Logic');
@@ -524,6 +529,59 @@ describe('a Tremolo and a Vibrato in a sound FX graph (#320)', () => {
   });
 });
 
+describe('a Reverb in a sound FX graph (#328)', () => {
+  const at = (params?: Record<string, string | number>) =>
+    fxChainOf(compileSoundFx(line([{ type: 'SoundFxReverb', params }]).fx.graph).compiled!).stages;
+
+  it('takes the numbers of its preset, or the ones typed in for Custom, and is left out at a mix of 0', () => {
+    expect(at()).toEqual([{ kind: 'reverb', decay: 0.6, damping: 0.5, predelay: 0.005, mix: 0.3 }]);
+    expect(at({ room: 'cave', decay: 9 })).toEqual([
+      { kind: 'reverb', decay: 5, damping: 0.15, predelay: 0.04, mix: 0.3 },
+    ]);
+    expect(at({ room: 'custom', decay: 40, damping: 0.2, predelay: 0.1, mix: 1 })).toEqual([
+      { kind: 'reverb', decay: 10, damping: 0.2, predelay: 0.1, mix: 1 },
+    ]);
+    expect(at({ mix: 0 })).toEqual([]);
+  });
+
+  it('shows the rows of Custom and of Sound only for them', () => {
+    const f = line([{ type: 'SoundFxReverb' }]);
+    const reverb = f.fx.graph.nodes.find((n) => n.type === 'SoundFxReverb')!;
+    const inputs = (room: string) => {
+      reverb.params.room = room;
+      return resolveDef(reverb, f.fx.graph, graphLookup(f.project))!.inputs.map((p) => p.key);
+    };
+    expect(inputs('hall')).toEqual(['in', 'mix']);
+    expect(inputs('custom')).toEqual(['in', 'mix', 'decay', 'damping', 'predelay']);
+    expect(inputs('sound')).toEqual(['in', 'mix', 'predelay']);
+    expect(SoundFxReverb.idleParams!({ room: 'sound' })).toEqual([]);
+    expect(SoundFxReverb.idleParams!({ room: 'hall' })).toEqual(['impulse']);
+  });
+
+  it('takes the file of a sound as its impulse response, built again when that sound changes', () => {
+    const f = line([{ type: 'SoundFxReverb' }]);
+    const made = new CreateSoundCommand('Church', FILE);
+    f.stack.execute(made);
+    const reverb = f.fx.graph.nodes.find((n) => n.type === 'SoundFxReverb')!;
+    reverb.params = { room: 'sound', impulse: made.asset.id, predelay: 0.02 };
+    const plan = soundFxBuildFor(f.fx, f.project).compiled!;
+    expect(fxChainOf(plan).stages).toMatchObject([{ kind: 'reverb', impulse: FILE, predelay: 0.02 }]);
+    expect(impulsesOf(plan)).toEqual([FILE]);
+    // Without the project there is no sound to find.
+    expect(fxChainOf(compileSoundFx(f.fx.graph).compiled!).stages[0]).not.toHaveProperty('impulse');
+    made.asset.file = OTHER_FILE;
+    expect(impulsesOf(soundFxBuildFor(f.fx, f.project).compiled!)).toEqual([OTHER_FILE]);
+  });
+
+  it('rings its pre-delay and its decay, or as long as its sound', () => {
+    const [made] = at({ room: 'hall' });
+    expect(fxTailOf({ pitch: 0, shifted: false, stages: [made!] })).toBeCloseTo(2.52, 9);
+    const sound: FxStage = { kind: 'reverb', decay: 1, damping: 0, predelay: 0.1, mix: 1, impulse: FILE };
+    expect(fxTailOf({ pitch: 0, shifted: false, stages: [sound] }, () => 3)).toBeCloseTo(3.1, 9);
+    expect(fxTailOf({ pitch: 0, shifted: false, stages: [sound] })).toBeCloseTo(10.1, 9);
+  });
+});
+
 describe('the tail of a voice (#324)', () => {
   const echo = (time: number, feedback: number, mix: number): FxStage => ({
     kind: 'delay',

tests/viewport/sound-library.test.ts

@@ -145,6 +145,8 @@ const clocks: {
 }[] = [];
 /** The pan of every track's panner made (#334), in order. */
 const panners: FakeParam[] = [];
+/** Every ConvolverNode made (#328), in order. */
+const convolvers: { buffer: unknown }[] = [];
 /** Every DynamicsCompressor made (#326), in order. */
 const compressors: Record<'threshold' | 'knee' | 'ratio' | 'attack' | 'release', FakeParam>[] = [];
 /** The curve of every WaveShaper made, in order. */
@@ -281,6 +283,11 @@ function fakeContext() {
       clocks.push(clock);
       return clock;
     },
+    createConvolver: () => {
+      const node = wired('convolver', { buffer: null, normalize: true });
+      convolvers.push(node);
+      return node;
+    },
     createDynamicsCompressor: () => {
       const node = wired('compressor', {
         threshold: param(-24),
@@ -317,6 +324,7 @@ beforeEach(() => {
   clocks.length = 0;
   shapers.length = 0;
   compressors.length = 0;
+  convolvers.length = 0;
   panners.length = 0;
   contextState = 'running';
   decodes = [];
@@ -2428,4 +2436,45 @@ describe('the stages of #318 to #328', () => {
       ['depth', 4],
     ]);
   });
+
+  it('makes the impulse response of a Reverb once, and waits its pre-delay before it (#328)', () => {
+    const context = fakeContext() as unknown as BaseAudioContext;
+    const stage = { kind: 'reverb', decay: 0.75, damping: 0.25, predelay: 0.02, mix: 0.4 } as const;
+    const made = stageNodes(context, stage);
+    stageNodes(context, stage);
+    const buffer = convolvers[0]!.buffer as { length: number };
+    expect(buffer.length).toBe(0.75 * 48000);
+    expect(convolvers[1]!.buffer).toBe(buffer);
+    expect(delays.map((d) => d.delayTime.value)).toEqual([0.02, 0.02]);
+    expect(made.knobs.map((k) => [k.param === null, k.target])).toEqual([
+      [true, 0.75],
+      [true, 0.25],
+      [true, 0.02],
+      [false, 0.4],
+      [false, 0.6],
+    ]);
+  });
+
+  it('loads the sound a Reverb takes as its impulse response with the voice, and rings as long (#328)', async () => {
+    const library = new SoundLibrary();
+    const plan: FxPlan = {
+      pitch: [],
+      stages: [
+        {
+          kind: 'reverb',
+          impulse: 'room.wav',
+          decay: { value: 1 },
+          damping: { value: 0 },
+          predelay: { value: 0.1 },
+          mix: { value: 1 },
+        },
+      ],
+    };
+    const voice = await play(library, FILE, {}, { plan, params: {} });
+    expect(library.playing(voice)).toBe(true);
+    expect(library.stats().decoded).toBe(2);
+    expect(convolvers[0]!.buffer).toMatchObject({ length: 1200, sampleRate: 800 });
+    // 1200 samples at 800 Hz, after a pre-delay of 0.1 s.
+    expect(library.tail(voice)).toBeCloseTo(1.6, 9);
+  });
 });

tools/e2e/34-sound.mjs

@@ -1145,6 +1145,57 @@ export async function sound(t) {
       Math.abs(swung.down - 940.5) < 1,
     JSON.stringify(swung),
   );
+  // #328: Reverb rendered offline. An impulse at 0.05 s through a Custom reverb of 1 s with a
+  //       pre-delay of 50 ms: nothing of it before 0.1 s, then it falls by 60 dB a second, 36 dB
+  //       from 0.2-0.3 s to 0.8-0.9 s after it. At mix 0.5 the impulse itself is there at half.
+  //       With a sound as its impulse response – one sample at 0.2 s – the impulse comes back
+  //       0.2 s and the pre-delay later, and nowhere else.
+  const reverbed = await evaluate(`
+    (async () => {
+      const RATE = 48000;
+      const render = async (stage, impulse) => {
+        const context = new OfflineAudioContext(1, RATE * 1.5, RATE);
+        const sound = context.createBuffer(1, RATE * 1.5, RATE);
+        sound.getChannelData(0)[RATE * 0.05] = 0.5;
+        let ir;
+        if (impulse) {
+          ir = context.createBuffer(2, RATE / 2, RATE);
+          for (let c = 0; c < 2; c++) ir.getChannelData(c)[RATE * impulse] = 1;
+        }
+        const source = context.createBufferSource();
+        source.buffer = sound;
+        const nodes = __gm.sound.stageNodes(context, { kind: 'reverb', decay: 1, damping: 0, predelay: 0.05, mix: 1, ...stage }, 0, ir);
+        source.connect(nodes.input);
+        nodes.output.connect(context.destination);
+        source.start();
+        return (await context.startRendering()).getChannelData(0);
+      };
+      const db = (out, from, to) => {
+        let sum = 0;
+        for (let i = from * RATE; i < to * RATE; i++) sum += out[i] ** 2;
+        return 10 * Math.log10(sum / ((to - from) * RATE));
+      };
+      const peak = (out, from, to) => Math.max(...out.subarray(from * RATE, to * RATE).map(Math.abs));
+      const wet = await render({});
+      const half = await render({ mix: 0.5 });
+      const sounded = await render({ impulse: 'room.wav' }, 0.2);
+      const heard = [];
+      sounded.forEach((v, i) => { if (Math.abs(v) > 1e-6) heard.push(i); });
+      return {
+        before: peak(wet, 0, 0.0999),
+        fall: +(db(wet, 0.25, 0.35) - db(wet, 0.85, 0.95)).toFixed(1),
+        dry: +half[RATE * 0.05].toFixed(4),
+        sound: [heard[0], heard.at(-1)],
+      };
+    })()`);
+  check(
+    'a Reverb waits its pre-delay, falls 60 dB in its decay, and takes a sound as its impulse response',
+    reverbed.before === 0 &&
+      Math.abs(reverbed.fall - 36) < 3 &&
+      reverbed.dry === 0.25 &&
+      JSON.stringify(reverbed.sound) === JSON.stringify([0.3 * 48000, 0.3 * 48000]),
+    JSON.stringify(reverbed),
+  );
   // #329: the Chip on the worklet, rendered offline. A square at 220 Hz with a pitch of 12 and a duty
   //       of 0.25, starting at 0.25 s: silence until then, 440 periods a second after it, up a
   //       quarter of each. Sliding two octaves a second down from 440 Hz with a lowest frequency of