The value type was already there: StructValue, textOf, sameValue,
writeTyped/mergeStruct and the struct port type came with the first
part, and Get/Set variable carry any-ports, so a bundle already flowed
through the graph unchanged. What was missing was the declaration.
PropertyDef gains kind 'struct' with a list of fields, VARIABLE_KINDS a
fifth kind, variableDef a fifth parameter. A declared field is a
primitive - a list field would need a nested editor and therefore the
path in the slot address, the same step "a list of structs" is waiting
for. coerceValue now returns PropertyValue rather than FieldValue, the
first value type that is not a field; none of its five callers break.
In the inspector a struct variable is a block, not a tab. The list tab
exists because hundreds of rows fit in no inspector row; a struct is the
opposite case - few fields that fit under each other. It is the port
editor Pack already has, one level down and with a value column: type,
key and default value in one place. A placed object sees the same fields
as plain value rows: overriding yes, declaring no.
Adding or removing a field touches the declaration, the default, the
behavior's value and every instance override in one command, so a stored
value can never keep a shape its declaration no longer promises. The row
handlers read the bundle at the moment of the change rather than closing
over a snapshot - a field writes the whole bundle, so with a snapshot
the second edited row revives the first one's old value. defSignature
carries the fields, otherwise a new row appears only at the next
rebuild.
Fixes a fixture fault this uncovered: step 10 pushed its text object
into the scene without instanceEdits, which overrideSites walks with
Object.entries. AddStructFieldCommand is the first caller to reach it
from that state; the step was green alone and failed three checks in the
full suite.
Moves the dynamic-ports note to done - all three of its parts are built.
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
A list property in the inspector was a single text field holding a comma
separated line -- unreadable past a handful of items, and it could not
carry anything but text. It becomes a button ("3 items") that opens a
sixth centre tab, where every item is a row built by the very widget the
inspector would build for that item kind.
The renderer was free: a PropertyDef of kind 'list' already carries
`items`, so item i becomes a synthetic def of that kind -- number, text,
boolean and colour rows appear without a new branch.
The way into the tab goes through the state (EditorState.listSlot,
openList(), event 'list'), like every other tab switch here; a tab may
not call showTab itself. ListSlot lives next to Selection rather than in
the tab folder, or state.ts would have to import upwards.
A row's handlers must not close over a snapshot of the list: they outlive
a commit, since the tab only rebuilds when the length changes, and the
second edited row would otherwise revive the value the first replaced.
showTab switched five `visible` lines by hand, where a sixth tab is
silently forgotten; it is a Record<CentreTab, Widget> now.
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
A variable could only be a number, a text or a yes/no, so every set of values had
to be smuggled through a string - which is where Tetris got its unreadable
"03066326048763714" colours from. A list is now a value of its own, with an item
kind (number, text, yes/no, colour) that decides how the inspector reads the one
comma-separated line it is typed as, and eight nodes to work with: List, Fill,
Count, Item at, Set item, Sub list, Join lists, Index of.
Two traps came with it. An array is typeof 'object', so every place that told a
value from an entity had to learn the difference, or a list would have been
passed around as a game object. And a value was compared by identity in three
places - with lists that marks everything as an overridden property after each
reload, so those comparisons now compare contents.
There is no list of objects: a list is written to the project file and an object
is a live handle that no reload survives. A set of objects stays a list of names.
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
The inspector already marked an asset value that differs from its schema
default, but the Assets panel gave no hint, so a changed asset looked
like an untouched one until you opened it.
The rule sits next to the existing objectDeviates as a pure function:
assetDeviates asks whether any marked property differs, markedAssetSchema
says which rows the inspector marks at all. buildAssetSection now builds
its rows from that same list, replacing the behavior/rest split it used
to carry, so the list cannot claim a deviation the inspector then fails
to show.
A behavior's variables are deliberately not in it. Their default is
declared on the variable itself, which means the asset value *is* that
default; counting them would paint the fixture's Mover gold while the
inspector beside it marks nothing.
The aspect button now carries two offers, so it becomes a menu: fit one
side to the texture ratio, or set both sides to the exact pixel size as a
single undo step.
Dropping a row on the outer quarter of another row inserts it into that
gap instead of parenting into it, reordering among the siblings there.
Order is the stored order, so ReorderObjectCommand is a splice; equal z
falls back to tree order, which makes this the way to draw one object in
front of another. Rejected on container content like the other structural
edits.
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
Add ↔ next to Width and ↕ next to Height in the inspector. Each sets its
field so the sprite matches the ratio of its assigned texture or frame,
reading the frame's own rect rather than the sheet's.
The buttons reuse the existing FieldActions convention, so they simply
do not appear when no texture is assigned, when the sprite is already
proportional, or on assets whose schema has no texture property.
Comparison is a cross product with a relative tolerance: 3135 of the
40000 size pairs up to 200x200 do not survive a round trip through a
division, so an exact check would leave the button standing after its
own click.
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
Remove comments that only restate the code, keeping the section banners
and the notes that carry a reason, a measured fact or an external
contract.
ButtonOptions.width claimed to be a fixed width but only set minWidth,
so the Graph and Texture pickers grew with the name they showed. It is
now what it promises, with a separate minWidth for the buttons that have
two forms. Narrow buttons shrink their padding, otherwise a 24px icon
button had 8px left for its glyph and truncate dropped it entirely.
__gm.labelsDropped() guards that class: the overflow guard only saw text
that was too wide, never a label truncated to nothing.
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
Images are uploaded to a content-addressed blob endpoint and stored as
data/textures/<sha256>.<ext>; the project only keeps the file name. The
sprite points at a texture asset through an ordinary property of the new
kind `asset`, so instance overrides, "Apply to container", "Reset to
asset", undo and `Set property` work without any extra code. The new kind
also replaces the ad-hoc asset picker the graph nodes faked as an enum.
Import goes through + -> Texture, drag & drop onto the canvas or Ctrl+V.
Images wider than 2048px are downscaled client-side and re-encoded to
WebP if needed, because nginx caps uploads at 1MB; an image that already
fits is uploaded byte for byte so pixel art is never resampled.
The sprite colour default changes from red to white, since colour tints
the texture multiplicatively and a tint of white shows an image as it is.
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
Menu entries are left-aligned and live in a ScrollContainer capped at 320 px, so a
long list (the parent picker holds every object of the scene) scrolls instead of
running off the screen. `Menu(items, { searchable: true })` puts a filter box above
the scroll area; Enter takes the first match. Filtering forces a relayout because
two queries with the same hit count leave the height unchanged, which would keep
the stale row positions.
Fields that open a menu are a new `Dropdown` widget: the value sits flush left and
the chevron is drawn flush right instead of being written into the label. A menu
opened below a field is never narrower than that field.
New debug hooks `overlayTexts()` / `overlayRect()` make the popup contents
assertable; e2e step 11 covers the cap, the scrolling and the search box.
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
Tooling:
- Prettier as the single formatting authority (110 columns, single quotes,
measured against the existing style); Markdown excluded because table-cell
padding turns the README glossary into 1000-character lines.
- Type-aware ESLint ending in eslint-config-prettier, so a rule always means
"this is a bug", never "this looks different".
- .editorconfig and an `npm run check` that runs typecheck, lint, format and
tests in one go.
Findings fixed on the first run: three more duplicate imports, four
String(unknown) calls (parameter types narrowed instead of casts), two dead
initialisers, two redundant casts, a console.log for a real error. Two
warnings were false here and are disabled with a reason in place.
Tests 132 -> 269:
- node-catalog.test.ts covers every node with a run(), with a guard that fails
when a new node has no row.
- behavior-events.test.ts covers the ten event nodes through a running World,
checking timing rather than existence.
- Input's state machine (press/release/releaseAll) is reachable without DOM
events now; the DOM handlers are thin adapters.
Compare fell back to == without a configured operator although the schema
default is <; aligned.
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
