The pixel-art check falls over sporadically, and its follow-up hid it. That one only
asked whether some pixel across the border is blended – but in the failing case the
`nearest` reading is already blurred, so the `linear` one is too, and the check passed
while saying nothing about whether the switch had any effect at all.
It now also demands that the picture actually changed against the `nearest` reading:
the summed colour distance over the five sample points must exceed 150. Measured on the
readings recorded in the note, a working switch drifts 425 and a hung one 0 – and 30
even if every channel were off by two, so the threshold is not brittle against noise.
Exact equality was the first draft and would have gone green on a single wobbling bit.
Both checks now carry `__gm.textureFilter(file)` in their message, so a failure says by
itself whether the model never switched, the switch missed the GPU sampler, or the
pixels were measured wrong.
The cause of the sporadic failure is still unknown; four hypotheses are measured and
ruled out in the note, which is filed with that stated plainly.
"+ → Texture" opened the machine's file dialog, so a picture that was uploaded once
but lost its asset – an undone import, a deleted asset – was unreachable from the
editor while still sitting on the server. Nothing collects those files, by design.
It now opens a grid of every picture the server holds, with thumbnails: pick one and
"Use image" makes a texture asset on that file, "Upload…" is the way in for bytes the
server does not have yet and lands in the same import as a drop. A tile captioned with
an asset name is one this project already wears – picking it selects that asset instead
of making a second one, since two assets on one file would fight over `filter`.
- `GET ?r=textures` now reports `width`/`height`; a texture asset holds the pixel size,
and reading it off the GPU texture would tie the asset's correctness to load timing.
- `TextureLibrary.load(file)` loads without touching `scaleMode` – a thumbnail must not
restage the filter of a picture the scene is drawing with.
- The grid geometry lives in `texture/imageGrid.ts` as pure functions; inside the widget
no test could reach it.
- The part after an upload is now one function shared by the drop import and the picker,
so "one file = one asset" is stated in a single place.
12 new E2E checks; the strongest one undoes an import, leaving the file on the server
with no asset naming it, and picks exactly that file back out of the dialog.
The inspector already marked an asset value that differs from its schema
default, but the Assets panel gave no hint, so a changed asset looked
like an untouched one until you opened it.
The rule sits next to the existing objectDeviates as a pure function:
assetDeviates asks whether any marked property differs, markedAssetSchema
says which rows the inspector marks at all. buildAssetSection now builds
its rows from that same list, replacing the behavior/rest split it used
to carry, so the list cannot claim a deviation the inspector then fails
to show.
A behavior's variables are deliberately not in it. Their default is
declared on the variable itself, which means the asset value *is* that
default; counting them would paint the fixture's Mover gold while the
inspector beside it marks nothing.
Three things the graph view did differently from the scene view, or not
at all:
Panning moves to the middle button, which works from anywhere – a node
under the pointer included, since NodeView now lets that one button
bubble up. Shift-drag on empty canvas pans too. The left button pulls a
rubber band instead and no longer pans.
Nodes can be selected several at a time: by band, by ctrl/shift-click,
moved together, deleted together, each as one undo step. The selection
model gains `nodeIds` alongside the objects' `objectIds`.
Fit really fits. It used to pin the zoom at 1 and merely centre, so a
graph larger than the view always left nodes hanging out, and it sized
every node with one guessed height although real ones vary with their
port count. Both sums now live in editor/graph/framing.ts as pure
functions, which is what made the defect testable at all.
The band selects any node it overlaps rather than one whose position it
contains, unlike the scene view: nodes are large rectangles, and a band
drawn visibly across one has to catch it.
An instance edit was dropped as soon as its value matched the template
object. With nested containers the template is not what the value falls
back to: the outer container holds an edit for the object below it, and
that one wins. If the inner template happened to carry the same value the
user typed, the edit was thrown away and the value jumped to whatever the
container in between says.
Reported against the Jump-and-Run project: a coin narrowed to 8 inside
"level", then set back to the sprite's own 24 in the scene, snapped back
to 8. Reproduced through the inspector before touching anything.
InstanceTarget now offers `base`: the template with the edits of every
container in between woven in. Everything that judges deviation uses it -
setOverride/setName/setPosition, both Revert commands, and the gold marks
in the inspector. Writing still goes into the real template, which is
where "apply to container" belongs.
`base` is built on every read. Apply writes into the template and then
asks whether the edit still deviates, so a base captured beforehand would
answer for the template as it was - the e2e suite caught exactly that.
Also in here, because it corrects the commit before it: placing an asset
by double-clicking its row is gone, as asked for in asset-doppelklick.md.
Dragging is the only way to place now. That took AssetPanel.place, the
PlacementTarget interface, Editor.placementTarget and the two worldCenter()
methods that existed only to feed it. A double-click on a scene asset still
makes it the active scene.
The context menu entry is gone; dragging replaces it entirely. The drop
target is the view under the pointer, not the active tab, so the same
gesture works for scenes and for container templates.
While dragging, an outline shows the footprint the object will have plus
a crosshair on its origin, turning red when the drop would be refused.
Preview and command share one function (placementRejection), so the
outline cannot promise something the drop then rejects.
A left-press used to select the list row immediately. Since the container
tab follows the selection, it switched to the very container being dragged
and every drop would have nested it inside itself. The list now selects on
release without a drag: picking something up is not the same as choosing it.
Dragging an edge now rings the port it would connect to and snaps the line
there. A drop on a node's body takes that node's first free compatible port,
or the last compatible one when none is free, replacing its link. A drop into
empty space opens the palette filtered to the node types the edge could reach
at all, and the picked node arrives wired - node and link as one undo step,
so a single undo takes back the whole gesture.
The decision of what fits what lives in core/graph/dropTarget.ts as pure
functions, tested directly; the canvas only draws the answer. The palette
takes an optional filter rather than knowing about drags.
Verified remote on the Windows box (GPU): ALL PASSED, 284 checks.
Dropped in via the share during the last task: asset drag and drop,
graph edge drag UX, multiple cameras, nested override reset, and gold
text colour for assets. Nothing implemented yet.
An inspector label whose value deviates from its base was drawn bold, which is
easy to miss next to the regular labels and says nothing in the hierarchy, where
a folded subtree could hide a change entirely.
The colour now lives as a theme token (`override`, #f2c84b) used by both the
inspector labels and the hierarchy rows. Whether a row deviates is decided by
`src/core/properties/deviation.ts`: `objectDeviates` compares an object against
what it follows -- the container template for content, the asset otherwise --
and `deviationMarks` carries the mark up to every ancestor, so a folded subtree
still shows that something inside was changed.
`deviationMarks` takes the stored holder, not the resolved one: in the resolved
view container content looks like an ordinary object and `instanceTargetOf`
would compare against the asset, marking every instance.
Covered by 3 unit tests and 5 e2e checks, including one that strips an object's
own overrides to prove the row stays gold for a deviating child and restores
them byte for byte. Full suite remote on the RTX 4070: 275 checks, all passed.
Sprite width/height stay fractional. They are geometry, not counts: the
aspect-ratio buttons compute height * w/h and legitimately produce values like
9.090909090909092 (compared with a 1e-9 tolerance), and both axes are scrubbable.
Rounding them would break the ratio the buttons just established.
Only fields that are integral by meaning round (slice grid, frame rect, camera
view, font size) - that is what 1b16a55 fixed.
Things that come up while something else is already running have nowhere to go: interrupting the
running task is wrong and remembering them is unreliable. A file per topic here keeps them, and
moving a finished one to done/ keeps what was asked next to what was built.
Contains the two notes already written (override display colour, sprite size decimals).
root