b50c7dbc35421cc340c04cd6099eda64bafc2d49
5
Commits
| Author | SHA1 | Message | Date | |
|---|---|---|---|---|
  adminandClaude Opus 5.5
|
8c53ce0cbe |
Replace the 5-Band-EQ with the Parametric EQ and remove it (#395)
The Parametric EQ does all the 5-Band-EQ did and more, so the editor keeps only one EQ. The old node was used in one project only, with nothing linked to its band inputs. - "Garden of Sacrifices" was converted once on the project file, not by a load migration (#137). Its 5 nodes are Parametric EQs now with the same filters: low shelf 80 Hz, peaks at 250 Hz, 1 kHz and 4 kHz with Q 1, high shelf 12 kHz. A band at 0 became no band. - Two values below -24 dB were held to -24, as the Parametric EQ goes no further. Both are in the asset "Delay" (high -60, low -36). The user will rework them by ear. - The write went through the API's own Store (lock, revision 20181 to 20182), so a tab with the old revision gets a 409 instead of overwriting it. - Removed with the node: its stage kind "filter" and the type FxFilter, which nothing else made, and the player's branch for it. A Pan is now the last branch of fxNodes, a Flanger that of stagesOf. - Tests that took the 5-Band-EQ as "some effect" use the Pan or the Parametric EQ now. The test for a parameter feeding a band now feeds the cutoff of a Filter, which had no such test yet. - A project that still names the type, such as an old snapshot of "Garden of Sacrifices", loads without those nodes. Unknown types were always left out on load. Tests: - Unit (stein2): soundfx 67, instrument 36, envelope 13, sound-library 127, all green - Counter-check: with the cutoff not taken from the parameter, only the new Filter test goes red - The converted project loads and compiles: Delay, Vocals and Drums play their bands (3+1, 4 and 5) - e2e 34 (atx): ALL PASSED, 136 checks, the palette check now looks for the Parametric EQ - Gate (atx): CHECK EXIT 0, 288 files, 4417 tests Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> |
||
|
adminandClaude Opus 5.5
|
c087993000 |
Edit a Filter in its node and resize EQ and Filter nodes (#385)
A Filter sounds like one band of the Parametric EQ, but it keeps what the EQ cannot: linked numbers, the all-pass and +-40 dB. So it stays a node of its own and gets the EQ's editor with itself as the one band. The editors also stop running out of their room: what does not fit is left out instead of being cut. - The curve of the EQ is now BandCurve with a host the EQ and the Filter both fill. CurvePanel holds what their panels share. - FilterPanel shows the Filter as one band. A drag of its handle sets frequency and gain as one undo step. A number fed by a link is greyed out and the drag leaves it alone. - A double-click on the Filter's title opens the same in a tab of its own. Delete there does nothing, the node stays. - The Filter is tapped like the EQ, so its node and its tab draw the spectrum of what passes it. A tap is two gain nodes per voice, the analysers are made only while someone listens. - EqFace and FilterFace are one CurveFace now, given the panel. - EQ and Filter nodes have a corner to resize them, drawn like the floating window's. The size is saved on the node as `size`, each drag is one undo step, the least is 240 x 120. - In the node the help line is gone. The row of numbers comes in only once the curve keeps 120 px of height. A group of the row that does not fit is not drawn, the one on the right first. - A frequency or dB label that would run into the one before it is left out. - The all-pass is drawn flat. The curve's maths takes every shape a Filter has. Found on the way: - The instrument presets set nodes 240 apart. A Filter with its editor is about 700 wide and covered the Bitcrusher, so a Filter now takes four columns. Tests: - Unit: 8 new (filter band, resize command and save, fitting rules), stage lists with a Filter now hold its taps - e2e 34 (atx): ALL PASSED, 130 checks (4 new) - Gate (atx): CHECK EXIT 0, 284 files, 4367 tests Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> |
||
|
adminandClaude Opus 5.5
|
7a17030472 |
Give every sound FX effect a Bypass and a Wet (#354)
A node could only be taken out of a sound FX by unplugging it, and only six of them could be blended with the sound they get. Every effect now has both, in the sound FX graph and in the instrument graph alike. The Mix, the Input and the Output have neither. - Bypass is a checkbox setting. A bypassed node is left out when the graph is compiled, so it costs nothing and holds nothing back. The graph draws it faded, and its body says "Bypass: true". - Wet is a number input like the others. It can be a parameter, be moved by Set sound FX parameters and, where the node allows it for its other numbers, follow an Envelope. - A blend is a stage of its own (`wet`) around what the node adds. The sound as it came in is held back as far as the node is late, so a Compressor, a Limiter or a Vibrato do not comb it out. - The six nodes that had a Mix keep their key `mix` and only call it Wet. Saved values, parameters and edges stay as they were. - The Delay crossfades now: the sound alone at 0, the sound and its echoes in full at 0.5, the echoes alone at 1. Before, the sound was always in full and `mix` was the echoes. - The Pitch takes its semitones by Wet instead of blending, through a share `times` on the amount that an instrument binds as well. Findings: - A Delay saved before this sounds different. It sounds the same at half its old value. The two chip presets with a Delay (Echo Lead, Bell) are halved to keep their sound. - Project cbbf160bb7e8 has two Delays (mix 1 and 0.5). They are left as they are. Tests: - Unit: soundfx 65 (8 new), sound-library 107 (3 new), instrument 35 (1 new), envelope 13. Two delay tests and the filter ports test follow the new numbers. - Counter-checks: 8, each turns its test red. - e2e 34 (melektaus-atx): ALL PASSED, 83 checks (2 new). The ping-pong check at wet 0.25 measures what it did at mix 0.5. - Gate (melektaus-atx): CHECK EXIT 0, 268 files, 4154 tests. - After the gate the derived ports of a blend are asked for once instead of twice: typecheck, lint and the three unit files green again (113 tests). Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> |
||
|
adminandClaude Opus 5.5
|
e1ca6a5f5a |
Shape a sound with every filter type, a Q and a slope (#318)
The Filter node from #335 only knew low-pass, high-pass and band-pass and had a Resonance from 0 to 1. It now has every type Web Audio offers, a Q as a plain factor and a slope up to 48 dB per octave. - Types: low-pass, high-pass, band-pass, notch, low shelf, high shelf, peaking and all-pass. The cutoff row is now labelled Frequency, its key stays `cutoff`. - Q from 0.1 to 30, 0.707 by default, replaces Resonance. Web Audio takes the Q of a low- or high-pass in dB, so it is converted when the voice is wired. No project used the node. - Gain in dB is an input only for the shelves and the peak. It is a derived port, so the sound FX compiler now resolves derived ports. - Slope 12, 24 or 48 dB/oct runs 1, 2 or 4 filters in a row. They share one cutoff carried by a ConstantSource, only the last has the Q. Shelves, peak and all-pass hide the row. - The Chip Presets get the Q their resonance gave before. Mutate moves Q in octaves and gain by up to a dB. - bindStage in the instrument compiler binds every amount of a stage generically, so new stages need no case of their own there. Finding: FLAT_Q was in dB and the delay damping used it. It is a factor now, the damping takes it through passQ and is unchanged. Tests: - Unit envelope 13, sound-library 96 (2 new), chip-presets 14, soundfx 45, all green. - Counter-checks: the Q on every filter in a row, the gain row for every type. Each turns one test red. - e2e 34 (melektaus-atx): ALL PASSED, 76 checks (1 new). Chrome offline, 2 kHz through a low-pass at 1 kHz: -12.37 dB at 12 dB/oct, -49.5 dB at 48. A +6 dB peak gives 6.00 dB, a notch -124 dB. - The gate runs once on the last commit of this series. Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> |
||
|
adminandClaude Opus 5.5
|
9c71eb1a0d |
Shape notes with an Envelope and move numbers with its curve #335
Without an envelope a note set in hard and broke off 10 ms after its end. An instrument now has an Envelope node with attack, decay, sustain and release. On the way of the sound it is the volume. Its output "value" moves a number of the note with the same curve, from "From" to "To", for a filter sweep among others. A new Filter node gives that sweep something to move. - Envelope (instrument only): attack a straight line, decay and release ease out and are 60 dB of the way at their time. A release takes 10 ms at least. Defaults 0.005 / 0.1 / 1 / 0.1. - The end of a note goes to the Envelope instead of the 10 ms fade. A Gate or Loop Sample under it plays on through the release, "Loop, then release" leaves its loop too, and the voice ends with the release. A One-shot under an Envelope of its own plays through. - A note ending before attack and decay releases from the level it has reached. Chrome holds it with cancelAndHoldAtTime, Firefox gets the level worked out from the shape. - New port type "envelope" (coral). It fits only a number input that says it can follow one (PortDef.followsEnvelope): Filter cutoff and resonance, Pitch, Gain, the EQ bands and Mix. Not the Delay, not the Envelope's own numbers. portsMeet() decides it for ConnectCommand, the drag and the drawn edges. - On the audio thread every Envelope of a note is one ConstantSourceNode. A number it moves gets the curve through a WaveShaper, in equal ratios for a cutoff and a gain. A number an Envelope moves is no longer reached by a parameter. - Filter (sound FX and instrument): low-, high- or band-pass, cutoff in Hz, resonance 0 to 1 as a Q. A low- or high-pass is flat at 0 and rises 20 dB at 1, a band-pass goes from Q 0.7 to 20. - Stop sound with "let ring" lets a note with an Envelope fall away in its release. Without it, and with Stop in the tab, it is cut. - The same note again during a release is a voice of its own. - The Envelope's numbers are set when the note starts. They can come from velocity or a parameter, later changes do not bend the note. Tests: - envelope.test.ts (new, 12): curve, ratios, Filter Q, compiling an Envelope, its value into each number, a Delay refused - sound-library +7: attack and decay on the clock, release from the level reached, One-shot held, Stop sound with and without let ring, a cutoff and a pitch moved by the curve - e2e 34: ALL PASSED, 50 checks (+2). Offline in Chrome the curve rendered 0.5 / 1 / 0.5005 at 0.05 / 0.1 / 0.3 s, released at 0.5 s it was 0.0158 at 0.65 s and 0.0005 at 0.8 s, released mid-attack it fell from 0.5 to 0.05 in 0.1 s. A Gain moved 0.25 to 1 was 0.5 halfway. A looped note of 0.2 s with a release of 1 s was gone after 1.32 s. - Five counter-checks (release end, One-shot hold, the follows check, ratios, pitch sum) failed 3, 1, 1, 2 and 2 tests. - Gate on melektaus-atx: CHECK EXIT 0, 245 files, 3812 tests Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> |