c74b6b1cabcd3ecb757a81240f64ebf68ae00cd7
96
Commits
| Author | SHA1 | Message | Date | |
|---|---|---|---|---|
  adminandClaude Opus 5.5
|
c74b6b1cab |
Show where an inspector row can be dragged and answer the pointer
After #310 rows could be dragged by their mark, but nothing said which marks take a drag, and the pointer on one changed nothing but the cursor. - A mark that drags is now a Grip: the same widget wrapped, the same size, so the value column stays where it was. Once sortBlocks takes it, it carries six faint dots at its left edge. - Marks that cannot drag stay plain: the variables of a placed object and the fields of a typed struct show no dots. - With the pointer on a grip its dots light up and the whole block that would move is washed in the accent colour, a struct with its fields. While the block is carried the wash gives way to the dimming, and the grip stays lit. - While a block is carried the other grips let the pointer pass: no lit dots, no wash. Every grip of the column shows grabbing instead of grab until the drop. - The wash first used controlHover like list rows. In the inspector it is darker than the panel and vanished next to the dark fields, so it became the accent at 15 percent, the colour of the drop line. - __gm.inspectorMark also reports the dots: none, idle or lit. Tests: - Gate on melektaus-atx: 236 files, 3576 tests (+4 in block-drag.test.ts, one of them a drag passing over another grip). - e2e 22: 40 checks (+1, sum 1740). 22f-iii reads idle dots, moves the mouse onto the mark and reads them lit. - Two counter-checks bite: no wash on hover fails 1 test, grips never made grabbable fail 3. A third: hover ignoring the drag fails 1. - Screenshots of a lit single row and a lit struct block looked at. Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> |
||
|
adminandClaude Opus 5.5
|
2c19c89878 |
Let variables, fields, ports and list items be dragged into order (#310)
Variables of a behavior, the fields of a struct, the ports of a start or end node and the items of a list could only be added and removed. Changing their order meant removing and adding them again. Now each of them is dragged by the mark in front of its row. - sortBlocks (ui/blockDrag.ts) makes the rows of one column sortable. A block is every row it covers, so a struct moves with its fields and a list item with its nested list. The block is dimmed while it is carried, an accent line shows where it lands, and a scrolled panel follows the pointer at its edge. Less than 4 px stays a click. - The arithmetic is pure and lives in ui/sortable.ts: blockGap, gapLineY, dropSlot and edgeScroll. dropIndex of the tile strip moved there too, so the reorder maths sits in one file. - MoveVariableCommand, MoveStructFieldCommand and MovePortCommand build on the existing MoveCommand. Undo moves back. - Lists need no command. InlineList replaces the list as a whole, as it does for every other edit of its items. - The grip is the kind mark, for a list item its number. Moving only happens among siblings: a field stays in its struct. - On a Struct asset the move runs through WithStructTypes. Typed variables, Pack/Expand ports and split outputs follow the new order. - Values and edges hang on names, so only the order changes. Nodes running a behavior read their ports from the start node, the new order reaches them without a copy. - Not sortable by design: the variables of a placed object, the fields of a typed struct (moved on the Struct asset) and the picked ports of Variables/Properties nodes. - Test hook __gm.inspectorMark(label) finds the mark of a row. Tests: - Gate on melektaus-atx: 235 files, 3572 tests, CHECK EXIT 0 (+9). - tests/core/reorder.test.ts: a variable, a field two levels deep, a Struct asset reaching a typed variable and Pack, and start ports reaching the calling node with edges and result kept. - e2e 22: ALL PASSED, 39 checks (+4, sum 1739). 22f-iii drags a variable past a struct of several rows, then a field inside it. - Counter-probes: dropSlot by top edge instead of middle and a field move that ignores its path fail 3 unit tests. With sortBlocks switched off, the three order checks of 22f-iii fail. Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> |
||
|
adminandClaude Opus 5.5
|
808e1eefc2 |
Clean up duplicates and dead code, and fix the + menu check (#85)
Refactoring round 9 covers everything since round 8 ( |
||
|
adminandClaude Opus 5.5
|
f03ca0d382 |
Draw a shader in passes with a Pass node (#301)
A Blur stops at radius 8 in one pass, and bloom needs a softened copy of the picture beside the original. A Pass node cuts the graph: what feeds it is drawn into a picture of its own first, and the nodes that read a picture read that one when it feeds them. - Pass has color and alpha like the Output, a Resolution setting (Full, Half, Quarter) and a picture output. Texture color, Texture alpha, Sample texture, Blur and Texture size get a picture input. Unconnected it is the wearer's own picture, so the original stays readable beside any pass. - picture is a port type of its own. It plugs only into a picture input, not even into an any port. - The walk shared by the compilers can stop at a node (cut). The shader compiler draws each Pass it meets as a fragment of its own, earlier passes first. A ring through a picture says Feeds itself, and more than 8 passes say so at the node. - A pass draws untinted. The tint comes on when the last part reads a picture, so a particle source draws its passes once for all of its particles (user decision). - A pass's picture is the wearer's picture and its Padding, at the pixels of the picture times Resolution, at most 2048 per side. It is read with the picture's own filter and continues past its frame as the Output's Edge says. - PassPictures keeps one render texture per pass and wearer. It draws again only when picture, size, Padding or a uniform changed. A field's picture is a render texture that changes under the same id, so a field draws its passes every time. - Sprite, sliced sprite, text, particle source, field shader and the Shader tab's preview all draw passes. syncShader takes a fixed picture for a 9-slice, which holds its corners but keeps the margin. - texelAt and blur take the sampler they read. Existing shaders compile to the same program apart from that argument. - A field shader's Blur and Texture size count a pixel as a unit of the frame (uPixelScale), not of the screen. Before, a field's blur grew when zooming out and shrank when zooming in. This came with #170 and #300 and is fixed here because passes inherit it. - tools/perf-shaders.mjs and tools/perf-field-shaders.mjs measure two passes with GM_PERF_PASSES=1 and GM_PERF_PASS_RESOLUTION. Below Full an open Pass shrinks the picture first, as the wiki's recipe does. Found on the way: - Destroying the pictures before the shader made Pixi warn that a texture was still bound. The shader goes first now, and a picture of a new size is resized rather than replaced. - Two passes in a row could draw plain white the first time. Pixi builds the code that binds a program's resources once and finds them by position. A pass of one graph is often the same program as a pass of another with fewer slots, so it bound a placeholder. Every shader now declares all 8 pass slots and its uniform group. Tests: - Gate on melektaus-atx: 225 files, 3480 tests (3467 + 13), exit 0. - e2e 28 and 31 on melektaus-atx: 97 checks (94 + 3) and 44 checks (43 + 1), all passed, no Pixi warning in the console. - 28l-vii: a Blur across, a Pass and a Blur down draw the 5x5 spot of a Blur of Both (difference 0.000). On a grey sprite a pass's picture added to the original is 231/60/60, each tinted once. Two Passes in a row after a graph with one show red and green, not white. - 31v-iii: a Blur of 8 fades a field's frame edge over 8.0 units at 50 % and at 200 % zoom. - Counter-checks: a tinted pass fails 1 unit test. Pictures never bound fail both e2e checks (spot 0.20 instead of 0.04, 243/158/158). Pass slots by the number of passes draw #ffffff, and a field without its pixel scale ramps over 16 and 4 units: exactly the two new checks fail. - e2e sum 1716 is counted, not yet measured (1712 + 4). - Measured on stein2 (HD 630, one run per row): 50 field shaders at radius 8 go from 11.4 to 41.3 fps in two passes, 44.4 at radius 16 (three passes at Half). 800 sprites at radius 8 go from 13.9 to 24.5 fps. At radius 4 one pass stays faster from 400 sprites on. Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> |
||
|
adminandClaude Opus 5.5
|
ec2fd9084f |
Say what a button without words does when the pointer rests (#209)
The top bar, the magnet, the eye and many marks of the inspector are
pictures without a caption. Whoever did not know one could only try
it. The toolkit had no hint on hover, which also forced the point
menu of #195 to be words. The answers in the issue settle the open
points: a cut tab name shows in full, shortcuts are part of the
text, the point menu stays as it is.
- Button takes a tooltip, a text or a function asked each time. It
shows on a small sign once the pointer has rested for half a
second.
- There is one sign for the page, a TooltipLayer on the overlay
above the menus. A control reports each pointer move and the
pointer leaving, the layer does the waiting.
- A press, a key, the wheel or a blur of the window takes the sign
away. initUI listens for them on the window.
- placeTooltip in ui/tooltip.ts is the rule for the place as a pure
function: under the control and flush left, flush right at the
right border, above the control at the bottom.
- toolbarTip says what the five buttons of the top bar do right now.
Undo and redo name their step from CommandStack.undoLabel and
redoLabel, as in "Undo Paint tiles (Ctrl+Z)".
- A SortableList reports its own marks with a key per mark: the eye,
the duplicate mark, the cross and the plus.
- The magnet, both fullscreen buttons, the eye of the scene tab, the
overflow of the tab strip, the plus of the assets panel, the marks
of the inspector rows and the nine anchors of the resize dialog
carry a text.
Decided here:
- Every button whose text is cut short shows the whole text, not
only a tab.
- A row action of the inspector names the one thing a click does. A
button that opens a menu says only Reset, Apply or Size from the
picture.
- A button just clicked stays quiet until the pointer has left it.
- A greyed out button shows no sign.
- The switches of the eye popup, the cross of a document tab and the
tools of pixel art have none. The tools carry words, other than
the issue assumes.
- The marks of a list say Show or Hide, Duplicate, Remove and Add,
whatever the list holds.
Found on the way:
- Signing out empties the overlay and would have destroyed a sign on
screen with it. The editor takes the tooltip away first. This has
no test of its own.
- The text hooks locate and has skip the sign, or it would answer
for the button under it.
Tests:
- Gate on melektaus-atx: 210 files, 3209 tests (3176 + 33), exit 0
- e2e 46 on melektaus-atx: 20 checks, all pass
- e2e 1-14 on melektaus-atx: 508 checks, all pass
- e2e 1-9,14,39,40,44-48: 685 pass, 2 fail, both in module 14. It
measures tabs that modules 10 to 13 open, and the chain 1-14 is
green. The cut chain was not run on the state before.
- No full run and no smokes. The sum of 1667 (1664 + 3) is reckoned,
1664 is what CI counted for
|
||
|
adminandClaude Opus 5.5
|
32a0af6e2c |
Put the text and boxes of the interface on device pixels
On a screen scaled to 125 % or 150 % the editor looked soft beside a page the browser draws itself. The layout counts in whole CSS pixels, and most of those fall between two device pixels there. The GPU averages both: text loses its edges, and a 1 px line becomes a pixel and a half of mixed colour. Now text and boxes are rounded to device pixels, and a line is one device pixel wide. - ui/pixelGrid.ts holds the rule. crispText() makes a text with Pixi's roundPixels, crisp() does the same for a Graphics of upright boxes, and hairline() is the width of one device pixel. - Every text of the interface is made with crispText() instead of new Text(). - crisp() only rounds where the scale is not a whole number. At 100 % and 200 % nothing changes. - drawControlBox, drawHeaderBar and drawSectionBand draw their lines a hairline wide and flush with the edge. The widgets that draw lines of their own do the same. - Two bands share exactly the line they draw, and a column still ends on a whole pixel. - The stage is nudged by 1/32 px where the scale is not whole. At 150 % every odd pixel is an exact half, and without the nudge one band came out a row shorter than its neighbours. - Curves, icons and everything of the game stay unrounded. Rounding their points would bend them. - The harness takes deviceScaleFactor as an option, and the hooks deviceColumn, edgeContrast and pixelGrid read the frame as the screen gets it. Not in here: the subpixel smoothing a browser gives its own text. Pixi draws a text into a transparent picture first, and there only greyscale smoothing is possible. Measured at 150 %, edge contrast before and after: top bar 31.5 to 47.8, the lists on the left 68.6 to 86.4, inspector 27.6 to 38.4. At 100 % it is 46.5, 90.1 and 37.9, and the picture there is the same as before pixel for pixel, apart from the fps display. Tests: - Gate on melektaus-atx: 206 files, 3114 tests (3104 + 10), exit 0 - Full run on melektaus-atx: 1655 of 1656 checks passed, smokes 24/19/21. The one that failed was a condition of the new step 62 itself: it scrolled an inspector that had nothing to scroll. The step now makes the window lower for that reading. - e2e 61,62 after that fix: 14 checks. The full run was not repeated, and CI is switched off for now. - Ten unit tests, nine in tests/ui/pixel-grid.test.ts - Eight e2e checks in the new step 62, which runs at 150 % - Eleven unit counter-probes fail tests - Four browser counter-probes fail their checks. They ran before the fix to step 62 and were not repeated for it. - Screenshots looked at for 125 % and 150 % Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> |
||
|
adminandClaude Opus 5.5
|
2ff3a78607 |
Put the shapes of a vector drawing on layers and in groups (#190)
A vector drawing was one flat list of shapes. With many shapes the list got hard to read, and several shapes could not be kept or moved together. Now the shapes stand on layers, as in pixel art, and can be put into groups that nest. - A drawing has layers, each with a name and an eye. A hidden layer is neither in the tab nor in the picture a sprite wears, and its shapes cannot be pressed. One layer is the one worked on: the pen and Add shape draw onto it, and SHAPES lists what is on it. - The inspector has a list LAYERS over the shapes. Its plus adds a layer, the cross on a row removes it with all on it, the last one stays. A double-click renames, a drag sorts. - Group (Ctrl+G) puts the selected shapes into a group, Ungroup (Ctrl+Shift+G) takes it away. A group stands over its rows in the list, the rows one step in, and a row is dragged into a group or out of it. - In the tab a press on a shape takes its outermost group, and a drag moves the group as one undo step. - The model has layers with a tree of shapes and groups instead of a flat shapes array. The rules are pure functions in core/model/vectorTree.ts. A drawing saved before opens with all its shapes on one layer. - SortableList takes rows with a depth and drops into a tree. The flat lists of tilemap and pixel art run as before. Decided here: - A group has no transformation of its own and cannot be hidden or locked. Rotating and scaling is the follow-up #291. - A group is never empty: the one that loses its last shape goes with it. - Several selected shapes are dragged together, grouped or not, and a click on a shape of the selection keeps the selection. This is what #217 asked for. - Shift+click selects like Ctrl+click. With Select, Shift pans only beside the shapes, as in the scene view. The middle button pans anywhere, and with the pen and Paint Shift pans as before. - A row of the list picks one shape of a group alone. - Shapes change their layer through a row Layer in the inspector, which is there from two layers on. Rows are not dragged between layers. - A group cannot span two layers, the button is off then. - The pen does not draw onto a hidden layer, the hint says so. - Groups are always shown unfolded. - The four order buttons work inside the own group or layer. Tests: - Gate: 204 files, 3067 tests (3008 + 59), exit 0 - e2e 47,48: 108 checks. e2e 39,40,47,48 before the Shift change: 209 checks. No full run, the sum of 1645 (1639 + 6) is reckoned and CI measures it. - 59 unit tests: 36 in tests/core/vector-tree.test.ts, 23 in tests/editor/vector-layers.test.ts - Six e2e checks with a real mouse in block 47j - 47 unit counter-probes for layers and groups and three for the Shift click all fail tests, run on stein2 - Three browser counter-probes fail their checks - Two screenshots looked at (group in the list, hidden layer) - Only unit tested: the row Layer, sorting and removing layers, copying a group, the Shift pan beside the shapes Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> |
||
|
adminandClaude Opus 5.5
|
393caadc9d |
Head the groups of the inspector with bands that fold (#290)
The groups of the inspector had a small grey label as their title, in the same grid as a property row, so with many rows one group hardly stood apart from the next. Now every group has a band as its head, from edge to edge of the panel, and a click on it folds the group. - A band runs across the padding of its column in the header colour, with the title and a mark that says whether the group is open. The titles stay as they are, as answered in the issue. - A click on a band folds its group: the rows go, the band stays and the next band moves up against it. A control in the band (Open, + Variable, + Property) does its own job and folds nothing. - A placed object has a group SWITCHES under its name, asset and parent: Enabled, Keep on scene load and the switches of a behavior. An asset has SWITCHES and PROPERTIES, and a group without rows is left out. - The same bands head the tilemap panel, the Variables tab, the side of the Pixel art tab and the shape list of vector art. A list with a title (Layers, Frames, Shapes) folds with a click on its header, clear of its plus. - ui/sections.ts holds the rules as pure functions, SectionStack is the column and SectionHeader the band. Every title of the inspector goes through addTitle or sectionHeader in inspector/host.ts. Decided here: - A fold is kept for good, in localStorage of this browser. The issue asked whether for the session or for good and the answer left it open. - A fold is remembered by title, per panel. PROPERTIES folded once is folded on every object, asset and node. A number in a title does not count. - A behavior asset has all its rows under SWITCHES. A Variables asset and a state machine get a group SCOPE. - A greyed out control in a band takes the click too. Without that the click fell through to the band and folded the group. - The Curve tab has no column of this kind and is unchanged. Found on the way: - The inspector of a sprite is taller than the 800 pixel window of the checks now. The hooks that hand out a row scroll it into view first, and module 28 scrolls before it looks for a row by its text. Tests: - Gate: 202 files, 3008 tests (2982 + 26), exit 0 - e2e: no complete run for this state. Modules 28 to 61 passed alone (749 checks). A full run was cut off in the accounts module at 1492 passes without a failure, the modules after it and the smokes are missing. The sum of 1639 (1635 + 4) is reckoned, CI measures it. - 26 unit tests in tests/editor/sections.test.ts - Four e2e checks with a real mouse, three in module 02 and one in module 48 - 25 unit counter-probes all fail tests, run on stein2 - Screenshots of the bands looked at before the last build, none after it Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> |
||
|
adminandClaude Opus 5.5
|
f2282a81fb |
Stop loading the bold face the editor never draws in (#273)
The editor waits for every face in FACES before it starts. Source Sans 3 in 700 was one of them, but nothing in src/ sets a weight above 600, so it cost a download and a wait for nothing. - fonts.ts loads Source Sans 3 in 400, 500 and 600 plus Source Code Pro 400. The 700 file (15 596 bytes) is gone from src/ui/fonts. - A search for bold, font-weight and HTML headings in src/, web/*.html and the player found nothing that would fall back to 700. - fonts.test.ts now checks both ways. A loaded Sans face must be set somewhere in src/, and every .woff2 in the font folder must be in FACES, so a stray file the glyph test would still read shows up too. - The weight scan moved into usedWeights(), since two tests need it. Tests: - Gate on melektaus-atx: 197 files, 2856 tests (2855 + 1), exit 0. - e2e 1-14: all passed, 492 checks, loaded faces ["400","500","600"]. - e2e 14 alone fails its two tab width checks, as known: it needs the documents 7-13 open. The font check was green there as well. - dist/assets holds no 700 file after the build. - Counter check: loading 700 again with its file fails the new "loads no face the editor never sets". - Counter check: the file back without a FACES entry fails "... and no other" and names the file. Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> |
||
|
adminandClaude Opus 5.5
|
77f4c2c1a3 |
Show entities and time per area while playing in the Game View (#275)
A game that stutters gave no hint where the frame goes. The Game tab now has a Performance switch. It shows a small overlay in the top left corner of the Game View while a game runs: fps, the number of entities and the mean milliseconds per frame for each area, averaged over half a second like the fps counter. - src/editor/frameMeter.ts holds the pure rule. FrameMeter sums the areas per frame, closes a window every 0.5 s and formats the lines. - World.timeSystem times every system the world ticks. PlaySession maps the systems to Behaviors, Physics and Animation and sets the hook again after Load scene. - Animation has its own line. Counting the AnimationSystem under Behaviors would have skewed that number. - Drawing is the build of the game picture plus app.render(). It is main thread time only. The GPU work after it is not in the number, and app.render() draws the whole canvas including the panels. - Editor is the rest of the editor tick after the systems and the game picture: mirroring into the model, panels and console. - The overlay lets clicks through to the game. It shows dashes until the first window closes. The switch is off by default and is not saved. The released game (#266) runs without a meter. Tests: - Unit frame-meter: 9 passed. - Gate on melektaus-atx: 197 files, 2853 tests, CHECK EXIT 0. - e2e 59 on melektaus-atx: ALL PASSED, 18 checks (13 before, +5 in 59e with a real mouse on the switch). Run twice. - Three mutations were caught: the editor share not subtracting the systems (2 unit tests), systems running in pause not reported (1 unit test), the overlay getting no times (59e). - The e2e total of 1601 is computed (1596 + 5), not measured. Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> |
||
|
adminandClaude Opus 5.5
|
ded71a92c9 |
Pick the target of an object variable in the Scene View (#276)
Choosing the target of an object variable meant finding its name in a dropdown. With many objects, or several with the same sprite, the name alone does not say which one it is. The eyedropper lets you click the object where you see it instead. - Every object dropdown gets an eyedropper button next to it. This covers variables, struct fields and list entries, in the Inspector and in the Variables tab. - The button opens the Scene View or the container tab the object lives in. A strip above the view names the field and the current candidate and offers Take and Cancel. The cursor is a crosshair. - A click picks a candidate and writes nothing yet. The candidate gets its own cyan frame, the selection stays on the object with the variable. - Clicking follows the selection rule. `pickOn` in `src/viewport/pick.ts` uses `pressOn` and only counts objects the dropdown offers. A click on empty space keeps the candidate. - Enter or Take writes through the same handlers as the dropdown. That is one undo step, or none if nothing changes. - Esc, Cancel, a right click in the view or a second click on the button cancel without writing. So do a tab switch, another selection, undo, redo, play and loading a project. - After Take or Cancel the editor goes back to the tab the pick came from. - While the eyedropper runs, the view does not drag, marquee, paint, show handles or open its context menu. Panning and zooming stay. Found on the way: - Started from the Variables tab, the click missed the object. The Scene View is hidden while that tab is open, and the layout skips hidden children. The strip appeared then, the view moved down by 32 px but kept its old height. `Editor.display()` now lays the row out again after showing it. Tests (on melektaus-atx): - unit pick and object-pick: 27 passed, 13 new - gate: 196 files, 2844 tests, CHECK EXIT 0. Two more come from svg-icons, which checks every icon twice. - e2e 57: ALL PASSED, 12 checks, 5 new (57e to 57g) - Counter-checks work. Without the layout fix 57g fails. Picking objects the dropdown does not offer fails 2 tests. Writing on cancel fails 2 more. Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> |
||
|
adminandClaude Opus 5.5
|
ffedd81803 |
Read many pixels from one render in the e2e checks (#283)
On the WSL runner every __gm.pixelAt costs about 7 ms, three times as much as on stein2. Each call renders the whole stage into a fresh render texture and stalls until the GPU hands one pixel back. pixelRow and several checks read hundreds of pixels that way. Module 05 spent 36.8 of its 40 s on these reads, module 04 11.3 of 20 s. - stagePixels in src/ui/render.ts renders once around all points and reads them in one go. Only whole pixels at resolution 1 take that path. Anything else stays point by point. - The hook __gm.pixels(points) exposes it, and pixelRow uses it. - The loops in e2e 04, 05, 14 and 44 read their grids in one call. - The old comment in pixelRow said a wider frame comes back resampled. That is not true. The colours match exactly, so the comment is gone. Measured on the RTX (d3d12) and on stein2 (Intel, Vulkan): diff 0 at 10 680 points on each GPU. One screen row takes 4 to 18 ms instead of 2.4 to 9.9 s. The six affected modules need 32 s instead of 139 s under WSL, faster than on stein2. The rest of the gap is in Chromium's GPU process. perf puts three quarters of its time in the drivers (NVIDIA D3D12, Mesa d3d12, dxg). Four browser and Mesa settings were measured, none helped. Tests: - ./check.sh on melektaus-atx: 195 files, 2827 tests, CHECK EXIT 0 (+4) - e2e 1-16,30,37,44,58 under WSL: ALL PASSED, 587 checks - counter-check: a wrong index in stagePixels fails the unit test Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> |
||
|
adminandClaude Opus 5.5
|
14972d057f |
Refactoring round 8: hide data files, safe saves, Esc as Cancel (#85)
Recurring cleanup round over the code since round 7 (
|
||
|
adminandClaude Opus 5.5
|
cab1c0177f |
Show only the game view in fullscreen, in the editor and the link (#267)
A game is easier to judge and to play without the editor around it. The Game tab and the game link now both have a button that puts the game view itself into fullscreen, not just the browser window. - The Game tab header has a fullscreen button on the right. It hides toolbar, panels, tab headers and console and keeps the zoom from the picker. A running game keeps running. - A corner button at the top right, or Esc, leaves fullscreen and puts the view back into the tab where it was. - The game link shows the same corner button. Over a running game it hides after 2 s without mouse movement and returns on the next move. - A click on the corner button never reaches the game. - Stop ends fullscreen. Stop switches back to the Scene tab, and any switch away from the Game tab ends fullscreen, so no empty screen is left behind. - src/viewport/fullscreen.ts wraps the Fullscreen API and holds the rule for when the button shows. FullscreenCorner.ts is the button used by both pages. Two SVG icons are new. - Editor.showGameFullscreen moves the GameViewport into the root while fullscreen is on. Tests: - ./check.sh: 195 files, 2815 tests, exit 0 (3 new unit tests). - e2e 60: 2 new checks for the corner button on the game link. - e2e 61 (new): 4 checks for fullscreen in the editor. - Full e2e run (local): ALL PASSED, 1580 checks. - Counter-checks fail as expected: rule without "no game running", no stopPropagation (60h), no end on tab switch (61c), no reparenting of the view (61a). Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> |
||
|
adminandClaude Opus 5.5
|
24d360aeec |
Add zoom steps and a larger start caption to the game link (#266)
The released game only ever zoomed in whole steps up to 400%, so a small camera on a large screen stayed far smaller than it could be. The "Click to play" caption was drawn in the 11 px panel title size and was easy to miss. - GAME_SCALE_STEPS gains 300%, 500% and 600%. The game tab picker, Auto in the editor and the game link all read the same list. - The start caption takes its size from the new Theme.captionSize (16) instead of a constant in GameScreen. - The player page keeps the default arrow cursor at all times. It no longer switches to the hand over the caption. Tests: - view.test: Auto for 320x180 in 2000x2000 is now 6, with cases for 3 and 5. play-settings.test takes 2.5 and 8 as invalid steps. - e2e 60 checks the caption against the panel title size and the arrow cursor before and after the start. Module 03 follows the new step list. - ./check.sh 2808 tests, CHECK EXIT 0 (before the last Theme tweak, which changes no test). Full e2e run ALL PASSED, 1574 checks. Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> |
||
|
adminandClaude Opus 5.5
|
4194f3e150 |
Share a link that plays the game without the editor (#266)
A project could only be played inside the editor, behind the login.
To show a game to someone else there was no way short of an account.
A release freezes the saved project under a random token and serves
it on a page that holds nothing but the game view.
- Menu -> Release... opens a dialog with the state of the release,
the link with Copy link and Open, Publish or Update release, and
Take down behind a confirmation.
- Publish saves first and refuses while anything is unsaved, like
snapshots. Updating keeps the link. Take down kills it, and a new
Publish hands out a new token.
- The link is play.html?game=<32 hex>. The page needs no session,
paints Theme.colors.background, zooms with Auto and waits for
"Click to play" so that sound and keyboard focus are allowed.
- The game always starts in the start scene. Persistent variables
are stored per link in the browser. Plugins are not loaded, and the
dialog warns about them and about a project without a scene.
- GET ?r=releases/{token} is the only route besides auth/* that works
without a login. The public answer carries the token as project.id,
so the project id stays hidden. Release files are written with 0640
and nginx does not serve them directly (measured 403).
- Starting, the frame and Load scene moved into runtime/GameRun.ts.
Play in the editor and the play page run through the same code.
- WorldViewport moved to src/viewport/ and no longer needs the
EditorState. Pointer forwarding (gamePointer.ts) and setting up
textures, fonts and sounds (projectFiles.ts) exist only once.
- Vite builds two pages. The play page loads 4 kB of its own code
plus the shared chunk (Pixi, runtime, drawing, 653 kB) and Rapier,
without the editor.
Found on the way, not fixed here: data/projects/<id>.json answers 200
without a login because the files are 0644.
Tests:
- ./check.sh: 194 files, 2808 tests, exit 0.
- tests/php/releases.test.php: 20 checks, also added to CI.
- New e2e module 60 with 10 checks, played in a browser without a
session. Module 46 counts the menu entries and was updated.
- Full e2e run: 1572 checks passed.
- Counter-checks: 3 unit, 2 PHP and 3 browser mutations all fail.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
|
||
|
adminandClaude Opus 5.5
|
d7d0a6e7d4 |
Let Tab reach the game in the Game tab (#261)
The game did get Tab, but the editor moved the keyboard focus to a button at the same time. The next Space then pressed that button instead of reaching the game. The key field of On key down could not capture Tab at all, so an inventory on Tab could not be built. - FocusManager asks tabBelongsElsewhere before it moves the focus. The editor answers yes while the Game tab is in front, so Tab stays with the game as long as no field has the focus. - A widget can claim Tab through takesTab. The key capture button does so while it is capturing, so On key down accepts Tab. - The harness knows the key Tab. Found on the way: - The first version of check 20g left the Behavior tab in front, and module 21 then failed in the chained run. 20g now goes back. Tests: - ./check.sh: 2746 tests, CHECK EXIT 0. - e2e 20 has two new checks: Tab reaches the game and leaves the keyboard with it, the key field captures Tab. Both failed against the old bundle. - GM_STEPS=19,20: all passed, 44 checks. The full local run with all three topics of this push passed with 1543 checks. Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> |
||
|
adminandClaude Opus 5.5
|
30de4d35a8 |
Give the scene tab a header with Fit and the eye (#245)
The scene view had no header bar of its own, and its eye sat in the top bar. Switching between Scene and Game also showed two different pictures, since nothing tied the free view to the camera. - Theme.headerPadding (4) replaces Theme.padding in the top bar and in TabHeader, for the padding and for minHeight. Both bars shrink from 40 to 32 px. Nothing else uses the new value. - The new ScenePane wraps the scene view in a header bar with Fit and the visibility eye. The eye is gone from the top bar, which keeps the menu, undo and redo. - Fit with an active camera shows the world exactly as the Game tab does at its chosen step: the same zoom, and the camera centre on the same screen pixel. The rule is the pure freeViewOfCamera in viewport/view.ts, which also mirrors the letterbox snapping. - Fit without a camera frames all content on a whole step, as before. - New hook __gm.sceneHeaderAt(name). e2e 46g opens the eye there. - The doc comment above Theme.treeIndent went away in the working tree along with this. It is committed as found. Not checked: the two views only match while they have the same size. With the tilemap panel open the scene view is narrower, and Auto may pick a smaller step there. Tests: - ./check.sh: 178 files, 2575 tests, CHECK EXIT 0 - 2 new unit tests in view.test.ts: three cameras times four steps land on the same screen point as in the Game tab, Auto stays whole - e2e 3h (2 checks): a real click on Fit at Auto and at Fit, crate, camera frame and view box match in both tabs - GM_STEPS=1-3,46: ALL PASSED, 94 checks - Counter-probes: without the centre offset the unit test fails, with Fit ignoring the camera both 3h checks fail Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> |
||
|
adminandClaude Opus 5.5
|
e0b471c354 |
Open the add menu with a right-click in the asset panel (#244)
New assets could only be added through the + button. A right-click on a category heading or on the empty space below the rows now opens the same menu at the pointer. - ListView gets the callback onListMenu. It fires on a right-click on empty space or on a heading. Only the asset panel has headings, so other lists are not affected. - AssetPanel opens its + menu from there. - A right-click on a heading does not fold or unfold the category. A right-click on empty space clears the selection like a left-click. - A right-click on an asset still opens the menu of that asset. - The empty list now says "No assets - press + or right-click". Tests: - ./check.sh: 178 files, 2573 tests, CHECK EXIT 0 - e2e 1-4: ALL PASSED, 134 checks - 3 new checks in e2e 04 with real right-clicks: menu on the "Scenes" heading (21 types, heading stays folded), menu on empty space, and "Behavior" from that menu creates one, undone again. - Counter-probe: without the menu both right-click checks fail. Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> |
||
|
adminandClaude Opus 5.5
|
2eeabf7c23 |
Drag a whole selection and join existing groups in the hierarchy (#241)
Three follow-ups to the hierarchy groups. Dragging a row that belonged to a multi-selection moved only that one row. The group dialog could only create a new group. The group row drew its folder in front of the label, unlike every other row in the hierarchy. - Dragging a selected row moves every selected object. This holds for reordering, dropping into a group or between its members, dragging out of a group and dropping onto an object as new parent. - The moved objects land side by side in hierarchy order, whichever row was grabbed. The whole move is one undo step. - A selected child of a selected object travels with its parent, not on its own. Dropping the selection onto its own rows does nothing. - Dragging a row that is not selected still moves only that row. - hierarchyDrop.moveObjects replaces the single-object rule. One object is the case with one element, so the old drop tests hold unchanged. - The group dialog has a "Group" dropdown: New group or an existing group. Picking a group greys out the name and turns the button into "Add". A group that holds all chosen objects already is not offered. - Rename keeps using the dialog without the dropdown. - ListRow draws an end icon at the very right and the hint left of it. Only the hierarchy uses iconAtEnd, so other lists do not change. - New test hook __gm.hierarchyHint() gives the centre of a row's hint. Not clicked in the browser: dragging a selection in the container tab and onto an object as parent. Only the unit tests cover these. Tests: - ./check.sh: 178 files, 2564 tests, CHECK EXIT 0 - e2e 1 + 52: ALL PASSED, 27 checks - 7 new unit tests in hierarchy-drop.test.ts, 4 new e2e checks in 52i and 52j with real clicks and a real drag - 4 counter-probes bite: drop rule ignores the selection (5 unit tests fail), icon column not kept free, dialog ignores the picked group, panel ignores the selection (only o2 lands in the group) Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> |
||
|
adminandClaude Opus 5.5
|
53fa63441b |
Group scene objects in the hierarchy, for the editor only (#241)
A scene with a hundred crates fills the hierarchy with a hundred rows. Groups bundle top-level objects under one folder row that folds away. They exist for the editor only. Parenting, positions and the game do not see them. - Model: a scene or container template holds a list of groups, an object may carry a groupId. Old projects load unchanged. Loading drops empty groups and members that are no longer top level. - Only top-level objects can join a group. Parenting a member takes it out of the group, and Undo puts it back. There are no groups in groups. - Order: treeOrder lists the members together, where the first one stands. The same order decides drawing at equal z, in the editor and in the game, so the hierarchy and the picture cannot disagree. The stored object list stays untouched when grouping. - Hierarchy: a group row shows a folder icon, the name and the member count. Clicking it selects all members and keeps it folded. Selecting a single member elsewhere unfolds it. Folding lasts for the session. - Create with "Group..." in the object menu. A name dialog asks first, so creating is one Undo step and Cancel creates nothing. - The group menu has Select members, Rename... and Ungroup. The object menu adds "Remove from group". - Drag and drop: onto the group row appends, into a gap between members inserts there, next to a row outside leaves the group. Dragging the group row moves all members as a block. The drop rules live in hierarchyDrop.ts as a pure function. - Copy and paste keeps a top-level copy in the group of its original. A container built from group members takes their place in the group. - Clicking an object that is already selected together with others now keeps only that object selected. ListView narrows the selection on release, so a drag starting on such a row keeps the selection. Not checked in the browser: groups in the container tab, "Remove from group", Ctrl-click on a group row and a drag out of a multi-selection. The code path covers them. Tests: - check.sh: 177 files, 2552 tests, CHECK EXIT 0 - e2e 1, 51, 52: ALL PASSED, 31 checks (new module 52) - 19 new unit tests in object-groups.test.ts and hierarchy-drop.test.ts - 9 counter-probes, all fail as expected (7 unit, 2 in the browser) Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> |
||
|
adminandClaude Opus 5.5
|
66868de10a |
Show destructive menu entries in red text, not on a red fill
A red filled row in a context menu shouted louder than the action deserves. The entry now looks like every other entry and only its text is red, so the menu stays calm and the warning is still there. - Menu: danger entries are ghost buttons with the new text style danger. On hover they get the same grey fill as all other entries. - Theme: new text style danger in the normal font size. The existing warning style is small and did not fit a menu row. - Button: two getters expose the drawn text colour and fill, so a test can measure the look instead of reading the danger flag. - Test hook __gm.menuLooks() lists both per menu entry. - Confirm dialogs keep their filled red Delete button. That is a separate widget and was not part of the request. Tests: - ./check.sh: 172 files, 2498 tests, CHECK EXIT 0 - e2e 25: ALL PASSED, 31 checks. New check in 25g opens the menu with a real right click: Delete row has text #e0553f and no fill, Insert frames keeps the normal text colour. - Counter-check: with the old styling the check fails with text #ffffff on fill #e0553f. Original restored per cmp and rebuilt. - Not checked: other menus (graph, assets) have no own check. They run through the same Menu code. Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> |
||
|
adminandClaude Opus 5.5
|
1b3cb625a3 |
Let a text field select from right to left with the mouse (#236)
Dragging from right to left in a canvas text field only moved the cursor. The hidden input behind the field got every selection sorted and without a direction. Its selectionchange echo then handed back the sorted range, and the anchor jumped to the mouse on the first move. - KeyboardBridge sets the selection with 'backward' when the focus lies before the anchor, and reads selectionDirection when the input reports a change. - TextField passes anchor and focus through unchanged. Its own sorting is gone. - Shift+Left runs through the same path. The cursor should now sit at the moving end there too. This is not tested on its own. Tests: - ./check.sh: 167 files, 2435 tests, CHECK EXIT 0 - e2e 2: ALL PASSED, 25 checks. New check 2d-ii drags right to left in the name field and reads start 0, end 13, direction backward. - Counter-check without the direction: 2d-ii fails with end 2, the reported symptom. - e2e check total in README goes to 1401 (computed, not run in full). Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> |
||
|
adminandClaude Opus 5.5
|
cb32b4bc23 |
Draw scene symbols as white panel icons that make room for each other
The scene view drew its symbols from its own SVGs, each in a type colour and some on a plate. They looked heavier than the panel icons and were hard to read on busy ground. Symbols of different objects also sat on top of each other whenever their positions met. - Every symbol is now the panel icon of its kind, one file for both places. The scene-only SVGs in src/viewport/icons are gone. - Symbols are white in a thin dark outline with no plate behind them. haloSvg widens each shape of the file by its own stroke and draws that silhouette dark under the icon, so no second file is needed. - A butt stroke end would leave its end without outline. The halo caps such strokes square, and the rigidbody arrow shaft is now a filled rect so its top edge is outlined exactly. - Symbols are 18 world units across, stay upright and are clickable. A click selects the object, a drag moves it. - symbolLayout places every symbol on its object's position. Symbols that overlap stand on a ring round the middle of their positions, evenly spaced one icon apart. A ring that reaches into another symbol takes it in until nothing overlaps. Ownership plays no part. - Names sit beside their symbol, on the outside of a ring. Selection frames and parent links follow the symbol. - A collider icon no longer shows trigger or invalid state. The outline colour of the shape still does. - A lone collider sits on its sprite's middle again. A press there on an unselected sprite drags the collider, so e2e 02 and 16 now grab the sprite beside its middle. Hook __gm.container.objectRect helps 16 find that spot. Tests: - check.sh: 2245 tests, CHECK EXIT 0 (+8 for layout and halo) - e2e 1-16,31,39-43: 670 PASS, 2 FAIL. Both were sampling too strictly for the thinner, smaller icons. 5c looked for the exact outline colour, which the thin outline only reaches blended at this zoom. 31n started the ring scan one pixel past the smaller ring. Both are fixed, and e2e 5,31 then passed with 48 checks. - 5c checks white with an outline and none of the old colours, 41b checks the ring positions and that a click on a symbol selects its object, 31n checks the now white particle ring. - Counter-checks: without the halo only 5c fails, also with the looser outline match. Without the layout the ring and click checks in 41b fail. Originals restored by cmp. - The e2e check total stays 1351. Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> |
||
|
adminandClaude Opus 5.5
|
2cf72022eb |
Ping an asset from its inspector link instead of selecting it (#221)
A single click on an asset link used to select the asset. That swapped
the inspector over to the asset, so the object being edited was gone
and the second click of a double-click landed on a different row. A
click now pings the asset in the asset panel, like Unity does in its
Project window, and a double-click opens it.
- state.pingAsset(id) emits a new `ping` event. It runs no command and
leaves the selection alone, like openAsset.
- ListView.ping(id) draws an accent overlay on the row. It stays full
for 200 ms and is gone after 1 s, driven by onFrame. destroy cancels
the animation.
- The asset panel expands the group, scrolls to the row and pings it.
- The capture listener and followedLink in the inspector are gone.
The inspector is no longer rebuilt, so pressCount on the label is
enough. followsPress and pressOf are no longer exported from ui/.
- The "Asset" and "Part of" rows of a scene object were a ghost button
that selected the asset. They are now a link label with the same
ping and open behaviour, next to a read-only field with the name.
- The link logic lives in linkLabel() in fieldFactory.ts. createFieldRow
and the asset row share it.
- TextField gets a readOnly option: no focus, no caret, no hover.
- New hook __gm.assetPing(). inspectorLink also reports the field
next to the label (value, readOnly).
Findings:
- Renaming an asset while its object was selected left the old name
in the inspector. This was already the case with the old button.
The refresh now updates the name.
Tests:
- ./check.sh: 151 files, 2228 tests, CHECK EXIT 0 (before 150 / 2226).
New: tests/ui/list-ping.test.ts for pingAlpha and pingAsset.
- e2e 1-16,28 on the final build: ALL PASSED, 575 checks.
28l-ii has 9 checks instead of 5.
- Counter-checks, each failing exactly at its check: ping also selects,
no follow-up frame (alpha stays 0.55), inspector never opens, field
takes focus, name not refreshed, label not a link.
- Check total 1345, calculated. CI last counted 1336 at
|
||
|
adminandClaude Opus 5.5
|
1aae97b335 |
Open a sprite's texture or shader from the menus and inspector (#221)
A sprite's texture and shader were only reachable by hunting for them
in the asset panel. Every place that shows such a reference now leads
straight to it.
- Object menu (hierarchy and scene view): "Open texture" and "Open
shader" sit right below "Open asset" when the sprite has one. The
object's own values count, so an overridden shader opens the
override.
- Asset context menu: the same entries at the top.
- Inspector: every asset field with a value shows its label as a blue,
underlined link. One click selects the asset, a double click opens
it. An override stays gold and gets the underline too.
- The first click rebuilds the inspector, so the second one lands on a
different row. The inspector catches that second click before any
row sees it.
- New pure rule `references.ts`: the asset behind a reference field. A
frame leads to its sheet. Kinds without a tab (palette, font, sound)
get no menu entry.
- `followsPress` in `clicks.ts` keeps the double-click window and
tolerance in one place.
- `activateAsset` in `actions.ts`: opening means the same everywhere
as a double click in the asset panel, so a scene also becomes the
active one. The asset panel uses it too.
Tests:
- ./check.sh: 150 files, 2226 tests, CHECK EXIT 0 (before 148/2214).
- 12 new unit tests: 6 for the reference rule, 4 for the link in
createFieldRow, 2 for followsPress.
- 5 new e2e checks in 28l-ii: both menus, the link's look, click
selects, double click opens.
- e2e 1-16,26,28,35,39,40 on the final build: ALL PASSED, 732 checks.
- Counter-probes: no "Open ..." entries, no underline and a second
click never recognised each fail exactly at their checks.
- Check total 1341 (CI counted 1336 at
|
||
|
adminandClaude Opus 5.5
|
0e8585665a |
Load the 500 weight and draw missing glyphs as SVG icons (#214)
The theme asks for Source Sans 3 at weight 500, but fonts.ts only
loaded 400, 600 and 700. The browser synthesised the 500 text. The
issue comment also asked for the symbols the font lacks to become SVG
icons. A scan of src/ against the font's cmap found 20 such characters
in 30 places.
- fonts.ts loads source-sans-3-latin-500-normal.woff2 as well.
- Menus draw their ticks and the "current" dot as icons. The dot is a
new MenuItem.current field and no longer part of the label text.
- Inspector action buttons (reset, apply, fit width/height) are
icons. The menu arrow behind them is the drawn Dropdown chevron.
- Kind marks come from a table in markIcons.ts. Picture kinds use an
icon, # and Aa stay text because the font has them.
- Scene marks in the asset panel, sound play/stop and the transition
arrows are icons too.
- Apply is an icon although the font has the arrow. It sits next to
the reset icon and would look different as a glyph.
- A new Icon widget draws on redraw like Button, so Node tests need no
DOMParser.
- Tests find icons through the SVG id. The new hook
__gm.locateIcons(id) and the harness helpers findIcon/clickIcon
replace locate() on the old characters.
Findings:
- Weight 700 is loaded but the theme never uses it. Left as is.
- The old scene-mark check in module 35 accepted any play glyph on
screen. It now checks the mark on the start scene's row.
- Module 44 needs the textures from module 37 and fails without it.
Tests:
- ./check.sh: 145 files, 2187 tests, exit 0 (before 144 / 2143).
- New tests/ui/fonts.test.ts: every theme weight is loaded, and every
character in src/ exists in every shipped face. The cmap reader
matches fontTools (231 characters).
- Icon tests cover the 19 new files. Each kind mark is either an
icon or text, never both.
- e2e 1-16,22,30,34,35,43,44: 586 green, 0 FAIL, then 44 stopped
for lack of module 37. e2e 1-16,37,44,47,48: 618 green.
e2e 1-14 on the final build: 454 green.
- Two new e2e checks: loaded weights in 14, a reset icon pixel in 04.
- Counter-probes all fail as expected: 500 removed, a play glyph put
back, the struct icon removed (one unit test each). In the browser,
500 removed and reset icon hidden fail exactly the two new checks.
- Editor-suite check sum 1312 (1310 measured by CI at
|
||
|
adminandClaude Opus 5
|
6e3e8d23c5 |
Combining vector shapes keeps the curves it did not cut (#208)
Until now every boolean operation on vector art threw the curves away. The shapes were flattened into line segments, the operation ran on those segments, and the result came back as a polygon. A circle that nothing even touched came out of an Exclude with 40 corners instead of its four points and handles. Now the result carries the original curves again, and only the edges the operation really drew stay straight. - While flattening, every sample point remembers which curve it came from and where on that curve it sits. The operation runs on the same segments as before, so nothing about the boolean result changes. - When a run of result points walks along one of those curves, that piece is cut out of the original curve again with de Casteljau. This is an exact cut, not a fit through the points. - An edge whose two ends sit on the same curve but whose middle does not follow it stays straight. Without that rule a cut-off cap would bulge back into the shape. - A closed contour keeps at least three points, so a lens shape does not collapse into two. - The rule lives in its own module, src/core/model/vectorCurves.ts. vectorBoolean.ts only hands it the table of sampled points. Findings: - The two intersection points themselves sit up to 0.09 canvas pixels off the original curve. Clipper cuts the flattened segments, not the curves, so this was the case before as well and stays inside the 0.2 px sampling tolerance. - Refining those points with Newton steps on the curve was measured and gave nothing back (0.02952 px instead of 0.02978 px), because the error is in the intersection itself and not in the estimate. The code was removed again. - Theme.ts rowHeight 22 -> 24 is in this commit. The change is not mine, it was already in the working tree; gate and module 47 are green with it. Tests: - ./check.sh: 143 files, 2133 tests, exit 0 (was 2127) - e2e module 47 on a fresh seed: all passed, 59 checks (was 57) - 6 new unit tests: untouched circle, untouched side plus a straight cut edge, a cut in the middle of a curve, a chord crossing one curve twice, two overlapping circles, the three point minimum - 2 new e2e checks in block 47p: point count and handles from the model, plus a pixel pair on the round edge - Four counter-proofs, all bite: no reconstruction -> 5 unit tests and the e2e check fail with 35 points and nothing curved; no chord test -> the cap bulges back to 28.28; no three point rule -> the lens test fails; handles halved -> the pixel check reads background Co-Authored-By: Claude Opus 5 <noreply@anthropic.com> |
||
|
adminandClaude Opus 5
|
d7a2521ca7 |
A port can take its type from what is plugged into it (#207)
Until now every port of "First not empty" was grey and typeless, so the
editor could not tell you what actually travels through the node. The
output is now typed as soon as both inputs agree, and every any-input is
painted in the colour of its own edge. Nothing changes at runtime.
- A NodeDef can declare which of its ports carry the same value
(`sharedType: { inputs, outputs }`). The rule itself lives as a pure
function `agreedType` in `src/core/graph/portTypes.ts`.
- Only the output inherits. It becomes the shared type when every input
of the group is connected and they all carry the same type, otherwise
it stays `any`.
- The inputs stay `any` on purpose. `canConnect` checks against the port
type and a busy input is replaced by the new edge, so a typed `a`
could never be re-plugged with a text without disconnecting first.
- Chains do not propagate. When looking up what feeds an input, a node
of the same kind reports the `any` it is registered with, so two of
them in a row stay untyped and a data cycle cannot ask itself in a
circle.
- An edge that the new type makes invalid stays where it is and turns
red. `EdgeLayer` already paints a mismatching edge with `danger`,
nothing is disconnected on its own.
- New `PortDef.paintType`: colour only, never truth. It is set in
`drawnDef` and read in `NodeView.redraw`, so `canConnect`, the
interpreter and the compiler keep seeing `any`. Every connected
any-input is painted, not just members of a `sharedType` group; ghost
ports keep their hollow red look.
- The pin now matches the edge that ends in it, because both take the
colour from the resolved output type of the neighbour. Mixed sources
therefore show two colours, which explains why the output stays grey.
- New hooks `__gm.graph.portTypes(id)`, `__gm.graph.edgeColor(id)` and
`__gm.themeColor(name)`. `portTypes` reports type and paint colour
separately so the type checks do not silently become colour checks.
Findings:
- `resolveDef` only appends derived ports to the registered ones, so a
fixed port cannot be retyped that way -- it would appear twice. The
shared type is therefore resolved before the ports are built.
- Answer 5 of the issue (inline field follows the type) has no case left
under variant A: an unconnected input stays `any` and keeps its text
field.
- `Item at`, `Join` and `Equals` do not profit: `Item at` has no
any-input, the other two have fixed outputs. The next candidates are
the shader arithmetic nodes, which were left alone.
Tests:
- ./check.sh -> 143 files, 2127 tests, exit 0 (was 142 / 2113)
- GM_STEPS=1-6 fresh -> ALL PASSED, 245 checks (was 242), 9 of them new
- 14 new unit tests in tests/core/shared-port-type.test.ts
- 9 new e2e checks in block 6z, one of them a pixel check straight on
the pin via pixelAt + themeColor
- Counter-probes all bite: filtering unconnected inputs out of
`agreedType` fails 3 unit tests, ignoring `inherit` fails 1, killing
the derivation in the bundle fails exactly the 2 expected e2e checks,
and never setting `paintType` fails 4 unit tests plus the 3 pin
checks (#bdbdbd instead of #e6a8ff / #6fcf97)
- Screenshot read: `a` pink, `b` green, output `value` grey, edges in
the same colours
- Check total 1302 (1299 + 3), 1293 was measured by CI at
|
||
|
adminandClaude Opus 5
|
0d207769b9 |
Focused text fields show their outline on every edge (#202)
The focus outline of a text field was only visible at its corners. The mask that clips the text covered the whole field, border included, so the 1 px stroke was cut away along every straight edge. Only the rounded corners bent inwards far enough to survive. With the larger radius the new theme tried, this became obvious. - TextField puts text, selection and caret into their own container. Only that container is masked. Background and outline are not. - NumberField and the rename field in lists inherit the fix. - The theme radius goes back to 2 px. - New debug hook __gm.focusedRect() returns where the focused widget sits, so a check can read its border. Tests: - ./check.sh: 141 files, 2080 tests, exit 0 - GM_STEPS=2: ALL PASSED, 24 checks (one new) - The new check in 2c reads the middle of all four edges of the focused name field. All four must be the focus blue. - Counter-check with the old full-field mask: the check fails, all four edges read #24272e. - Editor check total is now 1286 (1285 + 1), computed, not measured. Co-Authored-By: Claude Opus 5 <noreply@anthropic.com> |
||
|
adminandClaude Opus 5
|
940a78e8ee |
The editor ships its own font, Source Sans 3 and Code Pro (#202)
Theme named Inter and JetBrains Mono, but neither was ever shipped, so every machine drew the editor in whatever it had installed. The e2e runs measured text in a different face than the user saw. - Five Latin woff2 faces live in src/ui/fonts/ next to their OFL licences: Source Sans 3 400/500/600/700 and Source Code Pro 400. - fonts.ts loads them through FontFace, and main.ts waits for them before the first widget exists, so Pixi measures the real face. - A face that fails to load is reported in the console and the system fallback in Theme takes over. - Theme is retuned by hand: 12 px body, 22 px rows, smaller gaps and padding, radius 8, and weight 500 for bold and headings. - The scene background default follows Theme.colors.graphBackground. This makes core import from ui for the first time. Findings: - The 500 file is in the folder but fonts.ts does not register it yet, so weight 500 currently falls back to the 400 face. Tests: - ./check.sh: 141 files, 2080 tests, exit 0. - e2e not run. Checks that measure widths or row positions are expected to need updating for the new metrics. Co-Authored-By: Claude Opus 5 <noreply@anthropic.com> |
||
|
adminandClaude Opus 5
|
bbbf34109b |
Lists duplicate, rename and edit values right in their rows
Name, opacity and Z each sat in a separate field below or beside
the list. You had to select a row first and then look elsewhere to
change it. Duplicating was a separate button or not possible at all.
Now the row itself carries everything.
- SortableList gets three optional callbacks. onDuplicate shows a
copy button between the eye and the delete button. onRename opens
a text field on double click, Enter or a click outside commits,
Esc cancels, an empty name is ignored. value puts a NumberField
into the row.
- Dragging on the number changes the value and never moves the row.
A whole drag is one undo step, the canvas follows live.
- Copy and delete only show on the hovered and the selected row.
Their space stays reserved, so nothing jumps on hover.
- Pixel layers: copy right above with the same pixels on all
frames, rename, opacity in percent. The Name and Opacity fields
below the list are gone.
- Pixel frames: copy right after, replaces the Duplicate button.
- Tilemap layers: copy with cells, Z and visibility, rename, Z in
the row. The Name and Z fields in the panel are gone.
- Vector shapes: copy at the same place and select it, rename.
- New in core: DuplicateVectorShapeCommand,
DuplicateTilemapLayerCommand, withLayerDuplicated and copyName
("X copy", "X copy 2"). copyName lives in src/core/util/names.ts
because the model never imports from commands/.
Findings:
- Double clicking a shape that is not selected yet only selects it.
The first click moves the list up, so the second click misses the
name. Module 47 selects the row first.
Tests:
- ./check.sh: 138 files, 2055 tests, CHECK EXIT 0 (before 2052).
- GM_STEPS=47,48 (fresh, twice): ALL PASSED, 91 checks (before 86).
- GM_STEPS=39,40,47,48: module 40 green, 47 died on the rename
check, which was a test fault and is fixed.
- Counter probes: a constant copyName fails the shape and pixel
layer tests. A dead copy hit fails the copy check in 47.
- Check total 1272 in README and wiki, computed (1266 + 6).
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
|
||
|
adminandClaude Opus 5
|
ae0247d86f |
Lists add and delete items right in the list header and rows
The layer, frame and shape lists still had their add and delete buttons scattered below the list, each in its own layout. They now live in the shared SortableList, so every list works the same way. - SortableList gets an optional header with the title on the left and a + on the right, plus an optional x per row next to the eye. - The keepOne option hides the x on the last remaining row, so a pixel art image and a tilemap always keep one layer. - Pixel art layers and frames and tilemap layers use header, + and x. Only Merge down and Duplicate stay below the lists. - Vector art shapes get the x but no +. Add shape stays below the list and Delete shapes stays for a multi-selection. - The section headings in the pixel art column use the same style as the list titles and the inspector. Findings: - The wait loop added to check 47i for #196 only waited for the right half of the shape. If the texture landed between the two reads, the left half was still blue and the check failed. It now waits for both halves. Tests: - ./check.sh: 138 files, 2052 tests, exit 0. - GM_STEPS=39,40,47,48 (fresh): ALL PASSED, 156 checks (was 154). - GM_STEPS=47,48 (fresh, final): ALL PASSED, 86 checks. - Two new e2e checks: x on a shape (47) and x on a frame (48). The tilemap check in 40 now uses the x instead of Delete layer. - Counter-check: with the x not reporting to its owner, exactly the two new checks fail. - Check total 1266 in README and wiki is computed (1264 + 2). Co-Authored-By: Claude Opus 5 <noreply@anthropic.com> |
||
|
adminandClaude Opus 5
|
5b9b57fd19 |
Layer, frame and shape lists all reorder by drag and drop
Reordering shapes by dragging worked well in the vector tab. Pixel art layers and frames and tilemap layers still used up/down buttons. All three lists now share one widget built from the shape list. - SortableList in the UI toolkit, with the drag rules next to it in src/ui/sortable.ts. A row has an optional thumbnail, a name, a hint on the right and an eye toggle. Every drop is one undo step. - The shape list is a thin wrapper around it. shapeRows.ts is gone, its tests moved to the new rules. - Pixel art layers show the layer alone on the current frame, frames show the whole frame. Up/Down, Hide, Earlier and Later are gone. - Tilemap layers get the eye instead of the checkbox. The per-row up, down and delete buttons are replaced by Delete layer next to Add layer. - A row is selected on release instead of press. Selecting rebuilt the inspector or tilemap panel and cancelled a drag that started on a row not yet selected. Tests: - ./check.sh: 138 files, 2052 tests, exit 0 (before 137 / 2051). - GM_STEPS=39,40,47,48 (fresh seed): ALL PASSED, 154 checks. - 5 new e2e checks. Check total 1264 in the README is computed (1259 + 5), CI never measured 1259. - Counter-checks bite: dropMove ignoring reversed fails a unit test, a tilemap drop not applied fails the drag check, a layer thumbnail showing all layers fails the thumbnail check. Co-Authored-By: Claude Opus 5 <noreply@anthropic.com> |
||
|
adminandClaude Opus 5
|
3a68067079 |
Dragging a point in the vector art tab keeps up with the mouse (#129)
Dragging a point only redrew once the hand stopped moving, which the user reported after stage 3 and which measures as a real backlog, not a feeling: every pointer move wrote the model and fired state.preview(), and a project event rebuilds the panels, the run in the editor and the picture the drawing is rasterised into. A mouse reports about 125 times a second while the screen takes 60, so the queue grew instead of the drawing moving. - Measured with a throwaway e2e probe sending 120 moves at the 8 ms of a real mouse, against a growing scene. Per move event: 10 -> 7 ms with an empty scene, 19 -> 4 ms at 40 objects, 36 -> 3 ms at 120. The 120 moves took 4173 ms before and 960 ms after, which is the time they were supposed to take. - New onFrame(key, fn) in src/ui/render.ts collects such work per key and runs it in the ticker before app.render(), because afterwards it would be one frame late in the picture. The rule lives in ui/ rather than in the canvas so a second caller gets it for free. - VectorArtCanvas only queues in pointermove now, and cancels its slot on pointer up, where the command writes the final state anyway. During the gesture the drag's own copy of the rings is the truth and the model is never read back, so nothing is lost by the delay. The same cost sits in the scene viewport, the texture tab and the graph, which all call preview() from their move handler. They are untouched: that is outside the reported bug. Tests: check.sh 127 files, 1883 tests, exit 0 (was 1878). Full e2e suite locally instead of CI only because the change sits in the render loop: ALL PASSED - 1172 checks, the sum unchanged - a timing check in the browser would flutter under CI load. Five new unit tests in tests/ui/render.test.ts. Two counter-checks hold: running the work after the frame fails one unit test, and taking the coalescing out of the canvas puts the measurement back at 36 ms and 4153 ms. Co-Authored-By: Claude Opus 5 <noreply@anthropic.com> |
||
|
adminandClaude Opus 5
|
ae3aa7d3bd |
Refactoring round 5 covers the code since round 4 without changing behaviour: four identical copies of dot() and three of "nearest point on a segment" stood in the collision math, in the hit area of the collider outlines and in the polygon handles, so they moved into the new module src/core/util/vec.ts; the warning line, the busy state, info() and the caret reset were written out line by line in both the sign-in screen and the password dialog and are now FormStatus; the closing row "Cancel plus a confirming button, optionally one on the left" was built by hand in FormDialog, FilePicker, OpenProjectDialog and PasswordDialog and is now dialogButtons(); the header bar was drawn by the toolbar, the TabHeader and the Breadcrumb each on its own and is now drawHeaderBar(); AddColliderCommand and AddRigidbodyCommand share a base, each subclass only builds its own asset; Editor.ts derives the panes from assetEditors instead of repeating eight entries and clamps its splitters with clamp(); jscpd over src falls from 0.19 % to 0.14 %; dead code is gone - listScenes() has been orphaned since the Scene picker fell away (#183), DEFAULT_FILTER (#152) was never used, the two test hooks projectPickerRowAt/rowPosition and particleCompiles are read by no tool, and four functions lost an export they did not need; seven comments that told history ("used to", "no longer", "since #...") describe the state of things now, and that this changed nothing was proved by a rebuild - the bundle is md5 identical, b4ad0dfe... before and after; the README said Logout sits at the far right of the toolbar, which has been the Account menu since #182, and wiki/Architecture.md was missing src/core/util/ altogether; 4 new unit tests cover vec.ts, and switching the clamp on the segment off makes exactly one of them fail while none of the 76 neighbouring tests notice, so that clamping was covered nowhere before (#85)
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com> |
||
|
adminandClaude Opus 5
|
60d0146bde |
The topbar is icons only: the leading Project dropdown, the Scene picker and the labelled Play/Pause buttons are gone and in their place stand five icon buttons - menu, undo, redo on the left, play and pause in the middle - while Notice, the save state, fps and the Account menu keep the right side; the Play button swaps its icon for a stop square while the project runs and Pause swaps for a second play sign while it is held (Button.setIcon()), and iconSpace() drops the gap between icon and label when a button has no label, which is what kept a 24 px icon button 3 px off its own centre; the menu carries New project, Open project..., a separator and Project settings..., where the picker (src/editor/OpenProjectDialog.ts) preselects the open project and marks it "open", opens on a double click and puts Delete on the left of Cancel and Open - it closes itself before it asks whether to delete, because two modals on top of each other would have left the question standing over a list it no longer speaks about - and the settings dialog (src/editor/ProjectSettingsDialog.ts) holds the name, the "Play starts" switch (Start scene / Active scene, a preference of this browser and so no command) and the collision layers from #152, which retires CollisionLayersDialog.ts and the "Collision layers..." entry; what Apply actually writes is the pure function settingsChanges(), so renaming and the layers are each their own undo step and each drop out when nothing differs; the Scene dropdown falls away without replacement, the active scene is switched by double clicking it in the Assets panel, which is the way that was there anyway; new module 46 runs last with 9 checks (no label left in the bar, the run buttons in edit mode, the four menu entries, the picker with the open project preselected, Cancel leaving the project standing, the settings dialog on the state of the project, renaming with undo and redo through the icon buttons) and it neither opens nor deletes a project, because that would pull the project out from under every earlier module; modules 8, 18 and 35 and the harness follow the new bar, 6 unit tests cover settingsChanges and 3 the icons (#183)
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com> |
||
|
adminandClaude Opus 5
|
4f55f85ad4 |
Collision layers and masks: a collider carries a layer and a mask of the layers it meets, and the pair only meets when both masks name the other's layer - the rule is one pure module (src/core/model/collisionLayers.ts) with layerBit, layersMeet and the names a project starts with, so the three places that have to agree read the same function: the editor run through CollisionSystem, the Solids sweep per pair and Rapier, where the mask becomes the collider's interaction groups; the project file gained collisionLayers: ["Default"] (default one layer, no formatVersion bump), the collider schema two new kinds - layer as a dropdown of the project's layers and layerMask as a menu of tickboxes that stays open while it is ticked (Menu.ts learned rows that do not close on a pick) - and the names are edited through "Collision layers..." in the toolbar's Project menu, not a Project tab, which is the decision I made myself because the question ran into the MCP timeout: the dialog (src/editor/CollisionLayersDialog.ts) holds up to 16 names, Add layer appends "Layer <n>" and Apply writes all of them as one undo step (SetCollisionLayersCommand); a mask read from a file goes through a check that refuses anything that is not a finite number, because Number(null) is 0 and a collidesWith: null would silently have meant "meets nothing"; 9 new e2e checks in module 8 cover the menu entry, the dialog, Add layer, Apply and its undo, both inspector rows, the tickbox menu, and the mover walking straight through the crate that 8c blocked on once their layers no longer meet, and 21 new unit tests cover the rule, the schema and the command (#152)
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com> |
||
|
adminandClaude Opus 5
|
8e4bb6e1f9 |
User management: signing in is required before anything is loaded, the sign-in screen is drawn in the same canvas (user name, password as bullets, Enter moves on and submits) and the editor is built only after it; the API gained auth/session, auth/login and auth/logout while every other route answers 401 without a session, projects carry an owner and a foreign one comes back as 404, accounts live in data/users.json with a password hash and sessions as files in data/sessions with a sliding 30 days, so a build under the open tab does not sign anybody out; Logout sits at the far right of the toolbar and, as asked in the issue, does not reload the page: Editor.dispose() takes the editor down while the canvas stays, which is why the autosave, the focus handlers, the window listeners of the tilemap panel, the shortcuts and the plugins all got a way back; the tools sign in as e2e (tools/lib/auth.mjs, password from GAME_MAKER_E2E_PASSWORD or the git-ignored data/e2e-password.txt) and the browser gets the same session by cookie, new e2e module 45 covers the screen, the wrong pair, the bullets, logout without a reload and signing in again, new unit tests for HttpAuthStore and for what a session leaves behind (#177)
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com> |
||
|
adminandClaude Opus 5
|
60ea56a2ce |
Open asset greyed out and real tab cards: Open asset in the scene object menu is only pickable for kinds with an editor of their own, the table of which asset opens which tab moved from Editor.ts into the new module assetTabs.ts with hasAssetEditor so the menu and the editor read the same list, Select asset stays as it was; tabs are drawn as index cards (new module TabButton.ts): the one showing is a light grey card instead of the aggressive blue, rounded above and square below, its name in plain weight and measured bold so it never clips itself, and a mouse down on the tab already showing keeps its colour; the padding left and right grew to 6 px in one place for both kinds of tab, Scene and Game carry an icon too (the scene one from the asset panel, a new game.svg play sign), Plugins and a plugin's own tab have none; new test hook menuEnabled next to menuRows and menuIcons, e2e 01 checks the greyed out entry on a sprite row, 14a-ii the card and the icons of the fixed tabs, 44a the icon at the wider padding (#176)
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com> |
||
|
adminandClaude Opus 5
|
e3ebf44593 |
Asset panel grouped by kind with icons: assets are listed under a header per kind (Sprites, Behaviors, ...) with the count on the right, empty groups are not shown, every group starts folded when a project is opened, a click on the header folds and unfolds it, selecting an asset elsewhere unfolds its group and folding the group of the selected asset clears the selection; every asset kind has an SVG icon in src/editor/panels/icons/ drawn before the name, the pure rule for grouping and sorting lives in assetGroups.ts; the same icons replace the kind word in document tabs and the overflow menu (a list icon for the List tab, which also fixes the close x lying over the end of the active tab's text), stand before every entry of the + menu (Button got an icon option) and on the right of scene object rows instead of the type name; the colour swatch next to sprite names is gone from both panels; the SVG loader moved to src/ui/svg.ts for both icon sets; test hook assetRow unfolds the group and scrolls to the row, assetRowShown only reads, new hook menuIcons; e2e 4g and 4h, 14 and 44a check the icons (#176)
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com> |
||
|
adminandClaude Opus 5
|
cc285af10a |
Tabs are open documents: Scene, Game and Plugins stay as fixed tabs, every other asset opens in its own tab (double click or Enter in the asset panel, on creation, from the list button), several assets of one kind can be open at once, a tab is labelled with its kind dimmed before the name, cut at 160 px and renamed with its asset, closes with its x or a middle click and goes away when its asset is deleted; a tab always shows its own document instead of following the selection, the picker in the tab head is gone, zoom and scroll are kept per document for the session and dropped on close, a double click on a call node stays in the same tab with breadcrumbs per tab; one editor per kind is switched between documents, the placement rules live in the pure module documents.ts, and the test hook showTab stays as a compatibility path; new e2e module 44 documents (#171)
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com> |
||
|
adminandClaude Opus 5
|
4f546c0e08 |
Number fields drop trailing zeros: formatNumber still rounds to at most 3 decimals and then removes zeros at the end, so 100.000 reads 100 and 0.500 reads 0.5, everywhere (inspector, graph and shader nodes, duration and fps in the animation and tile tabs); a field's own decimals is now an upper limit, stored values are unchanged, -0 still shows as 0, and the graph's separate integer rule is gone (#172)
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com> |
||
|
adminandClaude Opus 5
|
32057a96fc |
Physics stage 2: colliders gain the shapes capsule and polygon, a polygon keeps its corners in the property points, turns, scales and mirrors with its object and is edited in the scene view (drag a corner, click an edge to insert one, double-click to delete, at least three stay, each step one undo step), a concave polygon is split into convex parts, a self-intersecting one is drawn red and collides with nothing, Rapier gets a capsule and one convex collider per part on the same body, and Move and the editor run use our own f64 geometry for the new shapes, where on a tie between two normals the one that blocks the move least wins, so a box no longer stops at the foot of a slope (#151); first version of a collision outline per texture frame, edited in the texture tab with the new Collision toggle, which a plain tile blocks with instead of its rectangle (#141, to be reworked)
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com> |
||
|
adminandClaude Opus 5
|
a65132bb5a |
Scrolling content is narrowed by the scrollbar width while the scrollbar is shown, so it no longer sits under the bar
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com> |
||
|
adminandClaude Opus 5
|
91cdaf95cc |
The panel frame is drawn above the content, so a hovered row no longer paints over the border
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com> |
||
|
adminandClaude Opus 5
|
d3563897d8 |
Two compilers that walk a graph the same way walk it through one emitter (#85)
Refactoring round two: the particle and shader compilers share emitGraph.ts (cycle detection, duplicate names, emit order) and keep only their rules. FontLibrary and TextureLibrary sit on FileLibrary (base URL, loading/failed bookkeeping, listeners); SoundLibrary keeps its own contract. The three Create*Command share ImportFileCommand, the three renames share RenameCommand - class names stay. bandBounds() in framing.ts and portNameField() in portSection.ts replace in-file clones, and three comments that told history now state the rule. Co-Authored-By: Claude Opus 5 <noreply@anthropic.com> |
||
|
adminandClaude Opus 5
|
b9f1a9d319 |
A graph that grew past one screen needs somewhere to say what a part of it is for (#38)
game-maker / suite (push) Successful in 6m13s
The graph could hold any number of nodes and said nothing about which of them belonged together. Groups and comments are two separate things, as decided in the issue: a group is a titled box that carries the nodes it encloses, a comment is free text that carries nothing. Both live as optional arrays on Graph, not as registry nodes. A comment that were a real node would run through the interpreter, show up in the drop palettes and be compiled into a shader — the wrong place for a piece of text. As arrays on Graph they exist in all four graph kinds at once, and a document without them means exactly "no groups", so no format bump. Membership is computed when the box is grabbed, never stored: the center of a node inside the box travels with it, and a node dragged out is simply out. A box inside a box travels with the outer one, its own nodes included. A group is grabbed by its title bar only — its body stays transparent to the pointer, or a rubber band could never be drawn across the nodes it holds. Deleting a box deletes the box; the nodes stay where they are, because a box that silently took ten nodes with it would be the most expensive surprise in the feature. The color is a free picker, and the title color follows from it: relative luminance per WCAG, threshold at 0.179 where the two contrast ratios meet — not 0.5, which would pick white on mid grey where black reads better. Resizing snaps the far edge to the grid, not the width, so the corner that is not being dragged stays put. The minimum size rises in whole steps for that reason: 80 is no multiple of 24, so a box squeezed to the stop would have sat off-grid in exactly the mode meant to keep it on. Co-Authored-By: Claude Opus 5 <noreply@anthropic.com> |
||
|
admin
|
7e5003b590 |
A test that waits for a deadline somebody guessed is waiting for the wrong thing, so it waits for the editor (#93)
game-maker / suite (push) Successful in 6m48s
The suite spent 88% of its step time asleep: 564 s of steps, 496 s of
them in sleep(n) - fixed spans estimated by hand and then copied from
step to step. That is why it was slow, and why it flickered.
The signal is afterFrames(count, timeout) in ui/render.ts, exposed as
__gm.afterFrames(). It wakes the loop itself, because an editor that
draws nothing would never redeem a promise of a frame, and it gives up
after a timeout instead of hanging the run. settle() in the harness
waits two drawn frames (~32 ms) instead of 150-300 ms and falls back to
sleep(150) when the hook is missing (an old build): silently not
waiting would make every later check a coin toss.
Every action goes through it now - click, doubleClick, wheel, drag,
dragAsset, press, typeText, select, mutate, undo, redo - and with that
about 550 sleep() calls behind those actions became redundant, helpers
that are nothing but a mutate in a coat included. What a frame cannot
answer got its own condition instead: waitUntil(expr), play()/stop()
waiting on __gm.state.mode rather than on 300 ms, saved() for the
autosave (the two hand-written polling loops sampled at 300 ms for
something that arrives after a second), and showTab() as a real tool -
47 places called evaluate("__gm.showTab(...)") raw, and 24 of them
waited for nothing at all and read the old panel.
564 s -> 243 s of step time, the waiting share 88% -> 76%. Three kinds
of wait were kept, and each one bit when it was taken away: loading
bytes (textures, fonts), game time that a repaint cannot stand in for
(time scale, shader and particle clocks, the live values a running
graph carries), and the inertia the scroll step measures on purpose.
Two things the new speed uncovered, both real: 25-animation read the
frame menu unfiltered and had frozen an incomplete list (the CI failure
on
|
||
|
adminandClaude Opus 5
|
3b039384c4 |
A search that ignores what a thing is called is no search, so the name wins (#43)
game-maker / suite (push) Failing after 10m23s
Typing "variable" into the node palette landed on `Run behavior`, because the filter weighed label, type and description alike and then sorted by category. `searchRank` in `src/ui/search.ts` now ranks a match: exact label or type, then prefix, then label, then type, and only last a hit that lives in the description alone. Category and alphabet order within a rank. The searchable `Menu` uses the same function, so searching means the same thing everywhere. The `+` menu grew to fifteen entries in declaration order. It is built in two alphabetical groups now -- the types that go into a scene, then the ones that stay in the library -- with a separator between them, the split `isPlaceableType` already draws. `ASSET_TYPES` itself stays untouched: it is also the serialisation and check order. A search flattens the groups and drops the lines. Popups were capped at fixed heights (320 menu, 260 palette, 340 pickers) while the canvas had room to spare. `Popup.roomFor()` measures its own chrome and takes the window height minus a tenth at each end. Placement clamps asymmetrically: the bottom margin is enforced, the top is only a budget, so a menu anchored near the top stays at its button instead of being pushed off it. Co-Authored-By: Claude Opus 5 <noreply@anthropic.com> |