Part (a) of the animation rework: model, commands, saving, runtime and nodes.
- AnimationAsset holds a root (sprite, text, container or scene) and rows; a row keys one
property of the root or of an object inside it, keys sit on whole frames.
- The last key decides the length (its frame counts as a frame of its own). The playhead runs
between frames, so numbers and colors blend every tick even at 10 fps; everything else holds.
- Playback gains `once-reset`, which puts back what was there before the start. A row can be
relative, adding to where its target stood.
- Play / Pause / Stop animation act on an object; each instance plays on its own, the later
start wins on a shared property, and a behavior writing the same property still writes last.
- A sprite no longer wears an animation through `texture`. "Create animation from texture"
builds a sprite plus a texture row keyed frame by frame instead.
- The Animation tab shows a placeholder until the timeline editor (part b) lands.
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
Refactoring round one: HttpFontStore/HttpSoundStore/HttpTextureStore collapse into a generic
HttpFileStore over a FileStore contract; fontImport/soundImport/textureImport share assetImport
with an ImportKind per sort; ImagePicker/FontPicker/SoundPicker sit on FilePicker and describe
only their row. The group/comment drag logic leaves GraphCanvas for annotationDrag.ts (with its
own unit test), declaredRows.ts replaces the duplicated row build in particles.ts and shaders.ts,
and dead code in font/sound/compile/emission/transform/actions is gone. README: asset list,
check count 958, the two-job CI, the Scenes wiki page.
Co-Authored-By: Claude Fable 5.1 <noreply@anthropic.com>
Fit measured the nodes alone: a group drawn around them was cut off, and a graph holding nothing
but a comment framed the empty origin. It now frames both sorts together.
The rubber band ignored boxes entirely. It catches them now, into the *same* selection as the
nodes — `nodeIds` and `annotationIds` side by side — so one drag moves all of it, one Delete
removes all of it, and one undo takes it back. A box counts only when the band holds all of it,
where a node counts on touching: a group wraps the nodes it holds and therefore overlaps every
band drawn over any of them, and since it drags those nodes along, catching it by accident would
be felt at once.
A node inside a selected group is moved once, not twice — `travellers()` collects everything one
gesture carries and lets each thing appear in it a single time.
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
TextureFrame carries optional `border` (left/right/top/bottom) and
`fill` (stretch | repeat); absent keys mean "not sliced", so no format
bump and undo restores the plain frame instead of four zeroes.
The sliced sprite builds its own geometry instead of the shared
UNIT_QUAD: a 4x4 grid, and for `repeat` one quad per tile carrying the
frame cell's real UVs -- tiling in the geometry, not in the sampler, so
a frame out of a sheet cannot pull its neighbour in. Above 64 tiles per
axis it stretches, to bound the buffer.
A sprite narrower than left+right scales both borders down together
until the middle is exactly 0, so the corners meet at a seam and never
overlap.
The texture editor gets four draggable border lines plus the same four
numbers in the inspector. Hit order is resize handles, then the lines,
then the frame body -- handleAt reports 'move' anywhere inside a frame,
so lines placed after it were unreachable.
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
The graph could hold any number of nodes and said nothing about which of them
belonged together. Groups and comments are two separate things, as decided in
the issue: a group is a titled box that carries the nodes it encloses, a
comment is free text that carries nothing.
Both live as optional arrays on Graph, not as registry nodes. A comment that
were a real node would run through the interpreter, show up in the drop
palettes and be compiled into a shader — the wrong place for a piece of text.
As arrays on Graph they exist in all four graph kinds at once, and a document
without them means exactly "no groups", so no format bump.
Membership is computed when the box is grabbed, never stored: the center of a
node inside the box travels with it, and a node dragged out is simply out. A
box inside a box travels with the outer one, its own nodes included. A group
is grabbed by its title bar only — its body stays transparent to the pointer,
or a rubber band could never be drawn across the nodes it holds. Deleting a
box deletes the box; the nodes stay where they are, because a box that
silently took ten nodes with it would be the most expensive surprise in the
feature.
The color is a free picker, and the title color follows from it: relative
luminance per WCAG, threshold at 0.179 where the two contrast ratios meet —
not 0.5, which would pick white on mid grey where black reads better.
Resizing snaps the far edge to the grid, not the width, so the corner that is
not being dragged stays put. The minimum size rises in whole steps for that
reason: 80 is no multiple of 24, so a box squeezed to the stop would have sat
off-grid in exactly the mode meant to keep it on.
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
Typing "variable" into the node palette landed on `Run behavior`, because the
filter weighed label, type and description alike and then sorted by category.
`searchRank` in `src/ui/search.ts` now ranks a match: exact label or type, then
prefix, then label, then type, and only last a hit that lives in the
description alone. Category and alphabet order within a rank. The searchable
`Menu` uses the same function, so searching means the same thing everywhere.
The `+` menu grew to fifteen entries in declaration order. It is built in two
alphabetical groups now -- the types that go into a scene, then the ones that
stay in the library -- with a separator between them, the split `isPlaceableType`
already draws. `ASSET_TYPES` itself stays untouched: it is also the
serialisation and check order. A search flattens the groups and drops the lines.
Popups were capped at fixed heights (320 menu, 260 palette, 340 pickers) while
the canvas had room to spare. `Popup.roomFor()` measures its own chrome and
takes the window height minus a tenth at each end. Placement clamps
asymmetrically: the bottom margin is enforced, the top is only a budget, so a
menu anchored near the top stays at its button instead of being pushed off it.
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
This reverses the design of the previous commit. `PropertyDef.scope` is gone
without replacement: a behavior variable is an object property again, without
exception, and sharing is something you point at rather than something you
declare twice.
A **Variables asset** is declarations and nothing else -- no graph, no position,
never placed, no tab of its own (`TAB_OF_ASSET` is already `Partial<>`, so that
costs no line). A `Variables` node names one through its new `variablesAsset`
setting, empty meaning the behavior's own variables as before, and then reads
and writes one value per key for the whole run. Its property list follows the
chosen source, which was the actual request: a value another graph declared is
now offerable, where before every participant had to declare the name itself.
That deletes more than it adds (-72 lines net): `globalConflicts` and its
run-stopping kind clash, `SetVariableScopeCommand`, the scope picker, both
object-inspector filters and the "shared by the whole run" note on the placed
object. A typo is no longer a silent second variable -- naming an asset is
picking from a list. And two Variables assets may carry the same key without
meeting, because the asset is the key, not the name. The one shape it copies is
the one that already existed: `Set state` picks its machine the same way.
Lifetime is unchanged. The bag is built at `BehaviorSystem.start()` from the
declarations and never written back, so playing in the editor cannot change the
project -- which is the whole reason a counter must not be an object property
(`World.syncToModel` would `commit()` it, and the coin counter would stand at 7
for good).
Full symmetry across that gap, without mirroring anything. Two named wires:
`Inspector.liveVariables` shows the values as they stand while a run is on and
falls back to the declarations when it ends, and `adoptDeclarations()` takes a
key into the run *only where the document changed it since the last sync*.
Without that condition any unrelated project edit would snap a running counter
back to its starting value; a counter-test bends exactly that and falls over.
Nothing was ever cached, incidentally: `GraphInterpreter` only pulse-caches
nodes without a `read`, and the variable node has one. The wire was missing.
The state machine `Scope` row is now an ordinary `enum` row through
`createFieldRow`. It was hand-built from an `HStack` with a ghost dropdown and
began ~34px left of every value above it; the explanations beside `Local` and
`Global` are gone from the menu, the sentence below the row keeps saying it.
Machine scope is otherwise untouched -- `StateMachineAsset.scope`,
`SetMachineScopeCommand`, `stateBag()` and its persistence all stand, so #59
stays closed as built and `Scope` as a type now carries machines alone.
Six counter-proofs, each biting at its own guard. One of them did not bite at
first: the suggestion list was computed twice, in `nodeSection` and
`portSection`, so only the browser test covered the request itself. It is one
named function now, `variableChoices`, with a unit test of its own.
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
A variable or a state machine declared `global` keeps one value for the whole
run instead of one per behavior instance. The scope sits on the declaration --
`PropertyDef.scope` and `StateMachineAsset.scope`, both optional, absence
meaning `local` -- and `local` is never written, so every project made before
this saves back unchanged.
**The name is the key.** Two behaviors declaring a global `score` mean one
variable; a behavior declaring `score` locally keeps its own. Kinds that
disagree about one global name stop the run before it starts, with the two
behaviors named; starting values that disagree are a warning on the behavior
that declares it, and the first declaration wins (`globalConflicts`).
The runtime needs no redirection layer. A global variable falls out of
`schemaForObject`, so it never reaches `entity.props` -- and then the whole rule
is "whoever declares the name takes their own value" (`graph/sharedState.ts`).
The `Variables` node is untouched and stays transparent: switching a variable to
global breaks no existing graph, because `GraphInterpreter.readAll` builds a
fresh object per read anyway and only asks `port.key in all`.
That same cut answers the inspector. A shared value has no owner, so the placed
object shows no row for it and can hold no override -- `SetVariableScopeCommand`
takes the deviations that were there and undo gives them back.
Both places say it in words rather than leaving a glyph to be guessed: the
declaration explains the mark below the list, and the placed object names the
variable it no longer holds instead of claiming the behavior declares none --
which is what it said before, untruthfully. Screenshots of the e2e run turned
that up; no check had been looking at it.
`SharedState` hangs off `NodeContext`, is built in `BehaviorSystem.start()` from
the *declarations* rather than from any instance (a global variable exists
before its behavior is placed), and is thrown away with the run: nothing is
written back, not even in the editor run. `GraphInterpreter.call` passes it on
through `...ctx` while nested calls keep getting fresh local variables, which is
why `program.defaults` is stripped of global keys.
Two traps this hit. `defSignature`/`assetSignature` have to carry the scope or
the inspector does not rebuild after the switch -- and a state machine has no
rows at all, so its scope is appended to the signature by hand. And the object
inspector does not go through `schemaForObject` for behaviors, it reads
`asset.variables` directly; filtering in one place was not enough, and no unit
test covered that path. The e2e caught it (`global: true` where false belonged),
and the rule now lives in one named function, `objectRows`.
Scopes `object` and `scene` are deliberately not built. The object case already
has a route (`Object by name` -> `Properties`), and a run knows exactly one
scene, so `scene` would be indistinguishable from `global` until #39 exists.
Closes#59: a machine's scope is a word on the machine asset, not a setting per
`Set state` node, so the same machine cannot live in two places at once.
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
A state keeps its `in`/`out` exec pins in the model and the editor never draws
them. That is the whole trick: connecting, undo, deleting a state and saving all
keep working untouched, because `normalizeGraph` filters nodes and never edges,
and no edge ever checks its port key against a NodeDef. Only two places change --
`NodeView.redraw` stops drawing the row, and `portAt` refuses to hand one out, so
an invisible pin cannot be grabbed either.
Transitions are drawn by right-clicking a state, `Make transition`, then clicking
the target. The armed mode takes the same shape as a live drag, so the existing
preview draws it with no second code path, and it dies with Escape, a click on
empty canvas or a switch to another asset.
Removing the pins removed the only handle a transition had: edges have no
hit-test anywhere, and the pin right-click was the sole route to Disconnect.
The inspector's TRANSITIONS OUT / TRANSITIONS IN lists are therefore not a
convenience, they are the delete path.
`GraphEdge` gained an optional `label`, which `normalizeGraph` has to pass
through explicitly or a saved name is dropped on load. `State transition`
replaces `Next state`: it takes the machine on an input port and the name from a
picker, and resolves against the *current* state. Names are deliberately not
unique across a machine -- two states may both have an `alarm` -- so a node named
`alarm` moves whichever state has one, and an empty name follows the single
unnamed edge.
The geometry moved to a Pixi-free `transitions.ts`: a gap to the box border, and
a fan that puts a pair of opposite edges beside each other instead of on top of
each other. Keeping it as plain maths is what let a screenshot bug become a unit
test -- an earlier pin-to-pin line ran under the target node and took its
arrowhead with it, because `nodeLayer` sits above `edgeLayer`.
One limit stands and is not fixed here: `ConnectCommand` rejects a second edge
between the same two states ("Already connected"), because every transition
hangs off the same two ports. With names, `A --alarm--> B` beside
`A --seen--> B` is a sensible pair, so this is worth its own issue.
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
Nine tabs need 631 px; at 1280x800 the centre column offers 666 px, so the tenth
tab would have spilled under the inspector - the same overflow CI caught in run 5.
TabStrip replaces the bare HStack: it fits the longest prefix that stays inside
the budget, always appends the active tab, and offers the rest behind a fixed
28 px button. The button's width is fixed on purpose - deriving it from the
number of hidden tabs would make width depend on the count and the count on the
width.
The rule itself is a pure function (tabRow.ts), so it is checked without a
browser. setActive() calls relayout() itself because Widget.resize only lays out
on a changed size, and switching tabs does not change any size.
Adding a tab now needs no space arithmetic - only a line in TAB_ORDER,
TAB_LABELS and panes, all three Record<CentreTab, ...>, so forgetting one is a
type error.
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
An upload sends its file name next to the raw bytes, and the server keeps
it in a sidecar next to the content-addressed file. Both pickers caption
every tile and row with it, and an asset made there is named after the
file instead of "Texture" / "Font". Last upload of the same content wins.
The API's own set_error_handler ignores error_reporting(), so @-silenced
warnings still throw: a missing sidecar took the whole listing down with a
500. Existence is checked instead of suppressed.
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
A font asset holds a file and nothing else, the twin of a texture: the server keeps it
content-addressed under data/fonts/{sha256}.{ext}, with the format read from the file's own
four-byte signature (finfo reports fonts inconsistently across libmagic versions). A text
wears one through its ordinary Font property, so overrides, reset, undo and the Properties
node come for free; no font means the editor's own typeface.
The picker lists everything the server holds and renders each row in the face it offers.
The family name is gm-font-<hash16>, never the name inside the file, so two "Regular" cannot
collide. WorldViewport.syncText is the single place that draws it, which covers scene, game
preview and play at once.
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
A sprite's picture is now a Mesh (unit quad, sibling of its Graphics node, which keeps
only the hit area); a worn shader replaces Pixi's fragment in that draw, so there is no
intermediate texture and no extra render pass. Measured on the HD 630: 400 shaded
sprites hold 60 fps (was 34), 800 hold 56 (was 20).
Two Pixi facts the code leans on: a mesh's texture is bound only for Pixi's own shader,
so GraphShader.wear hands it over; and MeshPipe caches whether a mesh batches and
re-checks it only in a frame without structure changes, so switching a shader on or
off calls mesh.unload().
The console panel mirrors console.group/groupCollapsed/groupEnd and fills the %s %d
%o %c directives, so Pixi's deprecation warning shows its head, not only its stack.
E2E 12 guards against the addChild-on-Graphics warning, 28 counts shaders instead of
filters.
Co-Authored-By: Claude Fable 5.1 <noreply@anthropic.com>
One rule for every asset type: a click on an asset row selects it, a
double-click (or Enter, or creating it via +) opens its tab. Selection
alone still switches tabs only for nodes, frames and template objects.
- state.openAsset(id) = select + 'open' event; the editor maps the asset
type to its tab via TAB_OF_ASSET. The two special clauses for state
machine and shader assets in the selection handler are gone.
- Creating via + and importing a texture from the picker open the tab;
paste/drop of an image only selects.
- 3 unit tests (event order, re-open of a selected asset, selection never
fires open), 14 e2e checks in step 4.
Co-Authored-By: Claude Fable 5.1 <noreply@anthropic.com>
A shader is an asset carrying a node graph (Texture color, Output, Property,
Color, Add/Subtract/Multiply/Divide, Mix, Luminance) that compiles to the GLSL
fragment of a Pixi filter. The Shader tab reuses the Behavior canvas; a sprite
wears a shader through its Shader picker, and the rows below it are the
graph's Property nodes. Property schema, resolution and deviation take the
project because a sprite's rows now live in another asset. The built-in
registry of the prototype is gone; "Adjust colors" ships as a graph in the
fixture and the three example games.
Co-Authored-By: Claude Fable 5.1 <noreply@anthropic.com>
A log layer (src/editor/console/log.ts) keeps a 500-line ring buffer and
wraps console.log/info/debug/warn/error, still calling the original. Notices
and behaviour runtime errors go straight to the layer instead of through
console, so editor tests stay quiet and errors can render red. world.log is
untouched: it is per-run structured state that runtime tests and e2e read
directly, not a text stream.
The panel sits under the visible tab, resizable with Splitter('y'), with a
CONSOLE header and a clear button. Each line carries its wall-clock time in
its own dimmed column, so locate() still finds the message text.
The taller centre area drops the graph fit zoom to 0.60, which broke six e2e
checks that assumed one screen pixel is one graph unit and that a fixed
offset from the canvas centre is empty. They now ask __gm.emptySpot(),
__gm.graph.emptySpot() and __gm.graph.zoom() instead of guessing.
locate/locateAll added the unscaled Pixi text width to the global position,
so click points in the scaled graph canvas landed too far right; they use
getBounds() now.
check.sh: 831 tests. Full e2e: ALL PASSED - 671 checks. Smokes 24/19/20.
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
- `.gitignore` said `index.html` unanchored, which also caught the Vite source page;
a fresh clone could neither `dev` nor `build`. Anchored to `/index.html`, page added.
- Removed GM_REMOTE (tools/remote/gm-browser.ps1 and the ssh/scp branch in browser.mjs):
the Windows test machine is gone and the only flaky check that lived on it is closed (#37).
- Removed `npm run preview`, undocumented and unused.
- Comments: wrong number in collider.test.ts (250 → 200), the "declarations used to…"
history in listItems.ts and friends, the 24 px/28 contradiction, section banners in
nodes/index.ts, node-catalog.test.ts and api/index.php, name paraphrases, and the stale
step numbers in tools/e2e/11-…23- from the old global count.
- README: asset types include `animation`, kind order Number/Text/Boolean, tagged colour
and texture items, 6/5 kinds, the `Texture` node, `./build.sh`, PROJECT_FORMAT_VERSION,
and the file tree (kinds.ts, listItems.ts, propertyPorts.ts, Breadcrumb.ts, beads.ts,
tools/assets/).
- tests/helpers.ts takes the duplicated `findObject` and `sceneWithCamera`.
Proof: ./check.sh 797 tests, full e2e ALL PASSED 633 checks against this bundle.
Co-Authored-By: Claude Fable 5.1 <noreply@anthropic.com>
A kind like colour or texture used to be spelled out in five parallel
lists, its port type, its empty value, its glyph, its label and its list
tag - 22 literal places for texture alone. core/properties/kinds.ts now
holds one row per kind and the rest is derived from it, so adding a kind
is one row. The five literal nodes collapse into literals.ts, the six
kind menus into one helper.
Number, Text, Boolean is now the one order everywhere; the variable and
port menus used to list Boolean before Text.
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
- `Texture` and `Color` can be picked as a variable kind, a struct field
kind and a declared port kind; a new `Texture` node hands a picture id
into the graph. Declared, a texture is its bare id – the `$texture` tag
stays a list-only thing.
- The `String` node is labelled "Text" like its kind; the type id stays.
- Whole-number inputs (`Item at`, `Set item`, `Sub list`, `Fill`,
`Repeat`, `Substring`, `To text`) show no decimals (`int()` in shared.ts).
- All server projects are reseeded, so `legacyNodes.ts`,
`migrateDeclaredLists` and the `ownerId` fallback go, with their tests.
- Note `reseed-because-of-list` moved to done/; new note `refactor-types`.
Co-Authored-By: Claude Fable 5.1 <noreply@anthropic.com>
A list no longer says what its items are. ListDef.items, ListDef.fields,
ListFieldDef.items and SetListItemsCommand are gone; the single seam is
src/core/properties/listItems.ts. JSON already tells number, text, boolean
and struct apart, so only two kinds need a tag: {"$color": n} and the new
{"$texture": id}. Field names cannot start with "$", so a tag never
collides with a struct field. On a data link a texture item arrives as
its bare id; the graph has no images.
List tab: the mark in front of each row is the kind picker, "+ Item"
asks for the kind, both are ordinary value edits (one undo step). A list
inside a struct field only offers the flat kinds because the depth rule
forbids a struct item there (ListAccess.kinds); the menu used to offer
it and silently do nothing.
Legacy lists that declared items: 'color' are tagged on load.
Actor demo: the four walk animations and four standing frames live in
two list variables of texture items indexed by facing (Item at), so the
graph can be rebuilt in the editor. The stand frames get their grid ids
back; 44 nodes instead of 46.
Also: the user's edits to on-start-during-play.md and the new note
reseed-because-of-list.md.
Verified: check.sh 794 tests, full e2e 631 checks, smokes 24/19/20.
Co-Authored-By: Claude Fable 5.1 <noreply@anthropic.com>
An animation asset is a list of pictures (whole textures or frames) with
frames per second and Loop/Once/Ping-pong playback. A sprite wears it
through its texture property, so the picker, instance overrides and the
Properties node work unchanged; there is no dedicated play node.
A different animation starts from its first frame, the same one set again
runs on, so a graph may choose Run or Idle every frame. The clock lives on
the entity, not in props, which the world writes back as overrides. The
AnimationSystem ticks before behaviors, and On animation finished fires
once when a Once animation reaches its end.
The Animation tab plays a preview above a frame strip: reorder by dragging,
Delete, duplicate, + Frames, pause/resume, and wheel zoom about the pointer
with pan and Fit. Scene and Container tabs show the first frame; edit mode
has no clock. Right-clicking a texture creates an animation from its frames.
Button now measures its label with the bold font it draws in, which cut
the Animation tab and red dialog buttons short.
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
The graph was only locked by five edit-mode guards in GraphCanvas. The
running game reads the graph by reference each frame, so a new node, edge,
changed value, disconnect or undo takes effect from the next frame. Stop
discards these edits like everything else changed in play. A new On start
node does not fire for a behavior that has already started.
During play every data output shows the value it last produced, in the
highlight colour and refreshed ten times a second. Values are kept per
graph, because node ids are only unique within one; with several
instances the most recent value wins. The Variables node reads the live
variable bag, so only its own outputs are kept, as a snapshot.
Each time an exec edge fires, a bead runs along it in 0.3 s, at most one
every 0.15 s per edge, following the same curve the edge is drawn with.
Beads run on game time and freeze while paused; the game logic is
unchanged.
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
Get properties / Set properties work like their variable counterparts:
one port per chosen property, an unconnected input writes its inline
value. A port chosen from the built-in list keeps that property's field
and default (height starts at 100, color is a colour field). "object" is
reserved for the fixed input, checked by the command and on load.
The property picker names the owning type ("Sprite width"), and text
fields can now carry a suggestion list; Get/Set property use it.
Double-clicking a call node shows the path of opened behaviors under the
graph header. Clicking an entry jumps back and trims the path; choosing
a behavior any other way hides it. Reopening a behavior already on the
path steps back to it instead of repeating it. The bar shows before the
graph switches, otherwise it clips the graph that was just fitted.
The "Add node..." header button is gone; nodes come from the context menu.
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
Split GraphCanvas (1076 -> 831 lines) into EdgeLayer and graphMenus;
the port and marker menus were the same list and are now one function.
Value specs of the inspector and the list tab share valueSpecs.ts, and
the remaining copies (compound commands, type glyphs, typed asset
lookup, name rule, play/editor world setup, marquee) are merged.
Four copies had already drifted apart; merging them fixes:
- "Disconnect N links" in the port menu is one undo step, not N
- "+ Add collider" is hidden on a placed container instance, as in
the hierarchy menu, instead of always failing
- a bool property coerced from the text "false" becomes false
- a port command on an unknown node type reports instead of crashing
Comment-only edits leave the bundle byte-identical. README corrected in
35 places (step limit, jump-run clock, suite duration, 409 body, ...).
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
buildStructBlock only covered structs, so a placed instance drew numbers,
text, bools and lists through createFieldRow on a 64 px name column while
its struct block sat on the asset's grid below it. variableRows.ts now
builds the row for every variable kind on both sides; the edit option
decides what the owner may change (asset: rename, x, item kind; instance:
revert and push). Label and Button take a fixed width so the mark column
no longer shifts names when a list shows its item-kind picker.
The two structFields calls that became dead with 9f48257 are gone. The
e2e steps locate the Enabled toggle through __gm.inspectorField instead
of clicking a fixed offset from its label.
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
The instance inspector drew its own, flatter version of a struct: one row per
field, no bundle head. It now draws the same block as the asset side, because
there is only one implementation left - both call buildStructBlock. What the
instance does not get is everything that touches the shape: renaming a field,
'+ Field', and the per-field '×'. The shape belongs to the asset; a placed
object overrides values. The revert and override marks sit on the head rather
than on a field, since an override covers the whole bundle at once.
Underneath this, editing a single field of an unoverridden struct used to blank
its siblings: structFieldsOf filled the untouched fields from spec.read, which
is object.overrides[key] and therefore undefined until something is overridden.
structOf then handed back the empty shape. PreviewedValue carries 'current' now
- the resolved value the row actually shows - and the fields come from that.
Without it the old path stays, which is right for the asset side, whose prop
bag is dense.
Ein Toggle in der Graph-Kopfzeile lässt gezogene Nodes auf dem 24er-Raster
einrasten – derselben Größe, die den Hintergrund zeichnet. Einschalten bewegt
nichts; die Regel greift erst beim nächsten Zug. Bei Mehrfachauswahl richtet
sich jeder Node für sich aus, statt einem gemeinsamen Versatz zu folgen, der
die alten krummen Abstände mitschleppen würde.
Die Entscheidung liegt als reine Funktion in framing.ts, wo die übrige
Graph-Geometrie schon wohnt, und ist dort wie im Browser gepinnt.
An unconnected list input is a button into the List tab instead of a number
field; a struct field can hold a list, so ListSlot carries an optional field
name and the three owner cases only say what sits at a key; and a list
variable picks its item kind in the inspector (marker doubles as the chooser),
so a list of structs no longer has to be born from a project file.
The declaration keeps the storable shapes finite: a struct field may be a list,
but that list holds primitives only, so list->struct->primitive and
struct->list->primitive are the two deepest forms.
check 674, e2e 483, jump-run 24, Tetris 19.
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
A list property in the inspector was a single text field holding a comma
separated line -- unreadable past a handful of items, and it could not
carry anything but text. It becomes a button ("3 items") that opens a
sixth centre tab, where every item is a row built by the very widget the
inspector would build for that item kind.
The renderer was free: a PropertyDef of kind 'list' already carries
`items`, so item i becomes a synthetic def of that kind -- number, text,
boolean and colour rows appear without a new branch.
The way into the tab goes through the state (EditorState.listSlot,
openList(), event 'list'), like every other tab switch here; a tab may
not call showTab itself. ListSlot lives next to Selection rather than in
the tab folder, or state.ts would have to import upwards.
A row's handlers must not close over a snapshot of the list: they outlive
a commit, since the tab only rebuilds when the length changes, and the
second edited row would otherwise revive the value the first replaced.
showTab switched five `visible` lines by hand, where a sixth tab is
silently forgotten; it is a Record<CentreTab, Widget> now.
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
src/viewport/ held three classes only src/editor/ ever used, and framing.ts sat
under graph/ although the scene view wants the same bounds sum. The graph, the
texture and the container tab repeated the same header, subscription and
disposal code with two silent divergences: the graph tab said "nothing shown"
with null instead of '', and the texture tab refell back to the first asset on
a selection change but not on a project event.
These arrive together because GraphCanvas ties them: it reads framing from its
new home, hands its fold marks to folding.ts, and its '' change is what
GraphEditor must agree with.
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
Pause is a sub-state of play, not a third mode: the toolbar button and
Ctrl+Enter stop ticking the world, the clock included. A held frame still
drops the input edges, so resuming does not fire a pause worth of keys in
one go.
The editor run missed the case it is most wanted for. hasEditorRun only
looked at the stored scene objects, so a behavior inside a placed
container never started one; the world now builds from resolveObjects and
writes back through objectRef, keeping the move as an instance edit
instead of baking the instance out.
Keys and clicks go to the run while the Game tab is on screen, where no
key means anything to the editor, and are handed back on leaving it -
held keys released, so nothing keeps walking unpressed.
A behavior object carries a "Run in editor" switch next to Enabled. When
it is on, the behavior ticks outside of Play and works on the saved model
directly - Unity semantics: what it moves is a real change, autosaved and
not undoable.
Input stays with the editor, so On key never fires while typing. The
editor run never bakes placed containers into the model, since that would
silently drop their instanceEdits.
syncToModel reports whether it wrote anything, and the dirty flag is only
raised on change - otherwise a behavior moving something every frame
would trigger ~60 saves a second.
"+ → Texture" opened the machine's file dialog, so a picture that was uploaded once
but lost its asset – an undone import, a deleted asset – was unreachable from the
editor while still sitting on the server. Nothing collects those files, by design.
It now opens a grid of every picture the server holds, with thumbnails: pick one and
"Use image" makes a texture asset on that file, "Upload…" is the way in for bytes the
server does not have yet and lands in the same import as a drop. A tile captioned with
an asset name is one this project already wears – picking it selects that asset instead
of making a second one, since two assets on one file would fight over `filter`.
- `GET ?r=textures` now reports `width`/`height`; a texture asset holds the pixel size,
and reading it off the GPU texture would tie the asset's correctness to load timing.
- `TextureLibrary.load(file)` loads without touching `scaleMode` – a thumbnail must not
restage the filter of a picture the scene is drawing with.
- The grid geometry lives in `texture/imageGrid.ts` as pure functions; inside the widget
no test could reach it.
- The part after an upload is now one function shared by the drop import and the picker,
so "one file = one asset" is stated in a single place.
12 new E2E checks; the strongest one undoes an import, leaving the file on the server
with no asset naming it, and picks exactly that file back out of the dialog.
Three things the graph view did differently from the scene view, or not
at all:
Panning moves to the middle button, which works from anywhere – a node
under the pointer included, since NodeView now lets that one button
bubble up. Shift-drag on empty canvas pans too. The left button pulls a
rubber band instead and no longer pans.
Nodes can be selected several at a time: by band, by ctrl/shift-click,
moved together, deleted together, each as one undo step. The selection
model gains `nodeIds` alongside the objects' `objectIds`.
Fit really fits. It used to pin the zoom at 1 and merely centre, so a
graph larger than the view always left nodes hanging out, and it sized
every node with one guessed height although real ones vary with their
port count. Both sums now live in editor/graph/framing.ts as pure
functions, which is what made the defect testable at all.
The band selects any node it overlaps rather than one whose position it
contains, unlike the scene view: nodes are large rectangles, and a band
drawn visibly across one has to catch it.
Remove comments that only restate the code, keeping the section banners
and the notes that carry a reason, a measured fact or an external
contract.
ButtonOptions.width claimed to be a fixed width but only set minWidth,
so the Graph and Texture pickers grew with the name they showed. It is
now what it promises, with a separate minWidth for the buttons that have
two forms. Narrow buttons shrink their padding, otherwise a 24px icon
button had 8px left for its glyph and truncate dropped it entirely.
__gm.labelsDropped() guards that class: the overflow guard only saw text
that was too wide, never a label truncated to nothing.
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
A new Texture tab next to Scene/Game/Graph shows a texture sheet and lets
frames be drawn on it: drag to create, move, resize via eight handles, edit
name and rect in the inspector, Delete to remove. Every change is a command,
so one gesture is one undo step. "Slice..." cuts a grid from columns and rows
with optional offset and spacing, previewing the resulting frame count and
cell size live.
Sprites pick a frame instead of the whole texture through the same `texture`
property: it now holds either a texture id or a frame id. Frame ids come from
the same generator and are document-wide unique, so one picker, one property
and one set of instance overrides cover both cases, and every sprite written
before this still means the same thing.
A Graphics fill ignores a Pixi sub-texture's frame and draws the whole image,
because it derives its uvs from the shape bounds and the inverted style
matrix. The cutout is therefore a matrix (`viewport/textureFill.ts`), which
keeps a sheet at a single GPU upload no matter how many of its frames are on
screen at once.
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
Images are uploaded to a content-addressed blob endpoint and stored as
data/textures/<sha256>.<ext>; the project only keeps the file name. The
sprite points at a texture asset through an ordinary property of the new
kind `asset`, so instance overrides, "Apply to container", "Reset to
asset", undo and `Set property` work without any extra code. The new kind
also replaces the ad-hoc asset picker the graph nodes faked as an enum.
Import goes through + -> Texture, drag & drop onto the canvas or Ctrl+V.
Images wider than 2048px are downscaled client-side and re-encoded to
WebP if needed, because nginx caps uploads at 1MB; an image that already
fits is uploaded byte for byte so pixel art is never resampled.
The sprite colour default changes from red to white, since colour tints
the texture multiplicatively and a tint of white shows an image as it is.
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
adminandClaude Opus 5