d505f6ed2776d25dcd6ea1272bd0fe3c47394187
50
Commits
| Author | SHA1 | Message | Date | |
|---|---|---|---|---|
  adminandClaude Opus 5.5
|
ded0022903 |
Run behaviors on a fixed step with an On fixed update node
Adding up the frame's dt in On update makes anything that counts in steps depend on the frame rate. A pitch sweep sounds a little different on every run. On fixed update runs 60 times per second of game time with dt exactly 1/60, so the same graph gives the same result every time. - fixedSteps in src/core/time.ts is the one rule for the fixed step: spend the frame in steps of 1/60, keep the rest, catch up 8 steps at most after a hitch. - The physics now counts its steps with fixedSteps too. It behaves as before, and On fixed update runs exactly as often as the engine steps. - The steps run after On mouse wheel and before On update, each as a kind of its own with the usual Order setting. - Each step gets its own context, so a node inside that reads dt (Time, Move, Apply force) gets 1/60 rather than the frame. - A paused game has no steps, also for a behavior that runs while paused. - The engine still takes all of a frame's steps before the behaviors run. A force set in On fixed update acts from the next frame on. Tests: - fixed-update.test.ts (new): 5 tests. Step counting, uneven frames adding up to 60 steps a second, the hitch cap, two steps at 30 Hz before On update with dt 1/60 for the event and for Time, one step every other frame at 120 Hz, none while paused. - event-order, node-catalog, physics-system, game-pause: 430 tests together with the new file, all green. - Counter-check: with the frame's dt inside a step and without the pause guard both world tests fail. Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> |
||
|
adminandClaude Opus 5.5
|
46c620ae3b |
Give a behavior more ways in and out, and hear it as an event (#294)
A behavior run by another one had a single flow port at its Start and at its End, so it could not branch for its caller. And it could not be used as an event: a call needs a pulse at its flow input, and the events of a called graph never fire. An input like "Confirm" (Space or Enter) had to be built again in every graph. - A declared port of a Start or an End node can be of the kind Flow. It sits above the values and shares their names, exec stays reserved. Only these two nodes declare one, a struct does not. - Run behavior shows a flow port of the Start as a further flow input. A call arriving through it leaves the Start through the output of that name and not through exec. - Run behavior shows a flow port of the End as a further flow output. The call goes on through the one the End was reached by last, and then through exec. exec fires always, as before. - On behavior is a new event node without a flow input. The behavior it names runs at the node for as long as the behavior around it runs, with all of its own events and one set of variables per node. - Its outputs are those of the End. It fires once the inner pulse is through, by the output the End was reached by last, exec only for End.exec. A pulse that never reaches the End is not seen. - The value ports of the Start are its inputs, read anew for each inner pulse. The Start itself never fires there. - It nests to any depth. Under a Run behavior it stays silent. A behavior hearing itself, however far round, is not started and the node says "A behavior cannot listen to itself". - The palette offers every other behavior with an End once more as "On <name>". A node naming one without End says so. - An On node removed while the game runs ends its behavior with On disable and On destroy. The sounds of the entity end only with the behavior placed on it. - Renaming and deleting a declared port follows the edges at On behavior nodes as it does at Run behavior nodes. - The flow outputs of the Start of a behavior placed on an object never fire, like its exec. - The engine prompt of the benchmark names flow ports and On behavior. Tests: - Gate on melektaus-atx right before this commit: 215 files, 3319 tests (3278 + 41), exit 0. - e2e 19 on melektaus-atx: 39 checks (+4), all pass. e2e 1-6,17-24,26,36,51: 628 checks, all pass. - 19 unit tests in flow-ports.test.ts, 19 in on-behavior.test.ts on a real world, the rest in the node catalog. - Four new e2e checks in module 19: a flow port declared by mouse at the End, On Confirm in the graph, the call leaving through the further output while playing, Enter and Space on a real keyboard. - 19 unit counter-probes all fail their tests. One did not at first (a removed node kept its instance), a test was added. Two browser counter-probes fail their checks. - One screenshot looked at: On Confirm with exec and pressed, the second flow pin at the calling node. - The e2e sum of 1680 is counted (1676 + 4), the full suite and the smokes did not run. - Not seen in the browser: flow inputs at the Start, nesting, the ring, values through On behavior, the palette entry. No test holds that the sounds of the entity go on when a heard behavior ends. Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> |
||
|
adminandClaude Opus 5.5
|
275e50af01 |
Let a tile report a touch instead of blocking it (#160)
A tile could be solid, one-way and scaled, but not report without blocking. Water, lava, spikes or a goal zone needed a trigger object of their own laid over the map. Now a tile has a switch Trigger, and the collision events name the tile and the cell they met. - A tile has the switch "Trigger (reports, never blocks)" under Solid. Its cells hold nothing up: no Move, no falling body, no ray. They raise On collision enter, stay and exit with the tilemap as other. - The three events have the outputs tile, cell x and cell y. Without a tile, tile is empty and the cell is -1, -1. - The three events have the input per cell. Off, the default, gives one event per area: cells of the same tile that touch side by side. On gives one event per cell. - The scene view outlines trigger cells in yellow like a trigger collider, merged to rectangles but never with solid cells. - Is touching with the map counts trigger tiles, and Set tile works while the game runs. - Both systems find the touches with the same overlap check in runtime/systems/tileTriggers.ts, not through the physics engine. Decided here: - Trigger wins over Solid. A tile with both does not block, as with a collider. - Water beside lava is two areas, and so are two ponds that touch only at a corner. - An area names the cell nearest to the centre of the collider, and on exit the cell it named last. - The solid cells of a map still do not name their tile. - Normal, impulse and point are 0, as with a trigger collider. - Collision scale and outlines shape a trigger cell like a solid one. One-way, friction and bounciness have no effect. Tests: - Gate on stein2: 205 files, 3104 tests (3067 + 37), exit 0 - e2e 39,40: 106 checks. e2e 1-8,39-43: 490 checks. Both on melektaus-atx. No full run, the sum of 1648 (1645 + 3) is reckoned and CI measures it. - 37 unit tests in tests/core/tile-triggers.test.ts, nearly all against both systems - Three e2e checks with a real mouse in block 40l-iv - 24 unit counter-probes fail tests. Two did not at first, tests were added for them. - Two browser counter-probes fail their checks - Two screenshots looked at (yellow outline, the node with per cell) Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> |
||
|
adminandClaude Opus 5.5
|
1aa824ecb4 |
Keep objects through a Load scene with a switch (#165)
A Load scene destroyed every object of the old scene. A player, a HUD or a music object had to be built again in each scene, with its state pushed through shared variables. A top-level object with the new switch Keep on scene load now travels into the next scene as the same entity, with everything below it. - The switch is a common property right under Enabled, off by default, on the asset and on a placed object. The inspector shows the row on top-level objects of a scene only, as answered in the issue. - runtime/keptObjects.ts holds the rules as pure functions. keptEntities picks what travels, objectsToBring copies the stored objects as the run parents them, and bringObjects puts them into the next scene. - World.instantiate takes a handed entity as it is instead of making one. The next syncToModel then writes the run's values into the scene. - BehaviorSystem.release takes the running instances out before the old world is destroyed, and the next system adopts them. They hear no On destroy and no second On start, and their sounds play on. - PhysicsSystem.resume gives a dynamic body the velocity and spin it had. - Duplicates: the object brought along wins. The next scene does not build its own object with the same id, which is the way back into the scene the object came from. - Decided here: the next scene does not build a top-level object of the same asset that is kept itself either. The issue only names the id. With the id alone a level that places its own player would hold two after a swap. - Decided here: kept objects land behind the scene's own, the switch is no animation row, and collisions are found anew. A finding, fixed along with it: Load scene did not build a scene as it is stored, but as the run had left it. A moved object stayed moved and a destroyed one stayed gone. The way back into a scene needs a clean build. - GameRun copies a scene's objects and groups before it first builds it and puts them back before it builds it again. - GameRun.end puts every such scene back. The player calls it on stop, so spawned objects no longer stay for "Click to play again". - The consequence: an edit made in a scene during Play is gone the next time that scene is loaded. Tests: - Gate: 199 files, 2944 tests (2929 + 15), exit 0 - e2e, full run: 1625 checks passed (1619 + 6), exit 0 - Smokes: 24 / 19 / 21, exit 0 - 15 unit tests in tests/core/keep-on-scene-load.test.ts - Six e2e checks in module 35: the switch is set with a real mouse, the child has no row, the object is in the new scene, its counter still reads 1, its sound plays on, and the stored scenes are unchanged after Stop - Eleven tests with fixed row lists only count the new schema row - 16 unit counter-probes all fail tests, run on stein2. One did not fail at first (same id not left out), it has its own test now. - The browser counter-probe fails 4 of the 6 new checks - Not looked at in the browser: the switch as a port of the Properties node, and a released game with a kept object Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> |
||
|
adminandClaude Opus 5.5
|
bc688f3efc |
Refactoring round 7: split BehaviorSystem, fewer copies (#85)
Recurring cleanup round over the code since round 6 (
|
||
|
adminandClaude Opus 5.5
|
a7e793f6de |
Keep many spawned behaviors from eating the frame
A scene with 200 spawned gold pickups, each with a Pickup behavior of 97 nodes, dropped the game to about 14 fps. The graphs themselves ran only a dozen nodes per pickup and frame. The cost was the lookup: for every data input the interpreter searched all edges and all nodes of the graph linearly and computed the port shape of the node again. - New module core/graph/graphIndex.ts builds tables once per graph: nodes by id, edges by node and port, node types. Port shapes are cached as well. - BehaviorSystem shares one cache between all its instances and clears it in syncFromModel. A graph changed during a run applies from the next frame on, as before. - An interpreter without a cache, as in most tests, searches as before. Measured on the scene Performance test (headless per frame, browser fps on a throwaway copy of the project): - Headless: about 21 ms down to about 3.6 ms per frame. - Browser, about 505 entities: 13.6 fps up to 23 fps. - Browser, about 320 entities: 32.3 fps up to 48 fps. - After the fix behaviors take about 15 % of the browser profile. The rest is the editor mirroring the game into the model and rebuilding its panels, which is a separate change. Tests: - ./check.sh: 192 files, 2786 tests, CHECK EXIT 0. - Full e2e run (local): ALL PASSED, 1551 checks. - tests/core/graph-index.test.ts: 2 tests. The tables return the same as the search, in the same edge order. A graph changed during a run applies from the next frame. - Counter-check: without clearing the cache in syncFromModel the second test fails with ['before']. Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> |
||
|
adminandClaude Opus 5.5
|
5fbc6eb088 |
Set the order in which event nodes run across behaviors (#264)
Which of two events ran first depended on hidden lists: the order of the behavior instances and the order in which nodes were created. A graph had no way to say that one On update must run before another, and an On update of one behavior could run before a key event of another. - A frame now runs event kind by event kind over all behaviors: On disable and On enable, key down, key up, key held, timer, collision enter, stay and exit, animation finished, click, mouse wheel and at last On update. - All 17 event nodes have a field Order, a whole number, default 0, negative allowed. Within one kind a lower Order runs earlier, no matter which behavior holds the node. - On a tie the current hierarchy decides from top to bottom, then the order in which the nodes were created. The old rule that a behavior enabled later goes to the end is gone. - The node shows Order: 5 only when the value is not 0, so existing graphs look the same. - The rule lives as pure functions in core/graph/eventOrder.ts. The interpreter can now fire a single event node. Changes in existing projects: - An object destroyed in a frame gets no further event in that frame. On disable and On destroy still come at the end of the frame. - New instances get all their On start first, then all On enable. Teardown runs all On disable first, then all On destroy. - State events follow right after the event kind that caused them. - Four unit tests had fixed the old order and are adjusted: two in behavior-events, one in physics-system, one in key-repeat. Tests: - ./check.sh: 191 files, 2784 tests, CHECK EXIT 0. - GM_STEPS=1-6: ALL PASSED, 280 checks. - Full e2e run (local): ALL PASSED, 1551 checks, measured. - tests/core/event-order.test.ts: 11 tests for the rule, the field on all 17 nodes, order across behaviors, key before update, two nodes in one graph, On start, hierarchy after late enable and reorder at runtime, state events, save and load. - e2e 6z-viii, 2 checks with real mouse and keyboard: Order -1 set in the inspector shows on the node, and a run logs B, A although B is lower in the hierarchy. - Counter-checks: 5 in unit tests and 1 in the browser, all fail as expected. The originals were restored and checked with cmp. Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> |
||
|
adminandClaude Opus 5.5
|
0c41cb97b1 |
Clip the children of an object to a clip area (#260)
An inventory grid could not scroll, because nothing could cut a child off at an edge. A game also had no way to hear the mouse wheel. Both are needed for a scrolling list, a dialog text or a window with more content than room. - A new object type Clip area has width and height and turns, scales and mirrors with its parent. The size gizmo drags width and height. - Everything below a clip area, on every level, is drawn only inside its rectangle, in the Scene view as in the game. Nested areas cut to their intersection. The rule works on a convex polygon, so a turned area cuts right as well. - On click, Is hovered and On mouse wheel do not hit a cut-off part. The Scene view does not pick it either. - In the Scene view the area is a dashed frame that is grabbed only at its edge, so a click inside lands on the content. The eye under Shape hides the frame. In the game the area is invisible. - While an object below an area or one of its parents is selected, the Scene view shows the cut-off part at 30 % opacity and it can be grabbed there. The rule lives in core/properties/clip.ts. - The Properties node knows the type Clip area. - The new event node On mouse wheel fires by the rule of On click. Its delta counts in notches, positive is down, and a frame's turns arrive as one value. It also gives x and y. Limits: - Only sprites and texts show the faded rest. Tilemaps and particles are cut and can be grabbed when open, but are not shown faded. - Masks by texture shape are out, as noted in the issue. Tests: - ./check.sh: 2773 tests, CHECK EXIT 0. - Full e2e run (local): ALL PASSED, 1549 checks, measured. - tests/core/clip-areas.test.ts: 12 tests for the cut rule, scene and game, save and load, hits, the wheel with and without owner, the notch conversion and the open rule. - e2e 58, 5 checks with real mouse and wheel: the scene cuts (74 of 74 red inside, 0 outside), a click on the cut part picks nothing, the selected rest is faded and grabbable, the game cuts, one notch logs 1. - e2e 04 and 46 count the object types and the eye rows. They now include Clip area. - Counter-checks: 6 in unit tests and 3 in the browser, all fail as expected. The originals were restored and checked with cmp. Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> |
||
|
adminandClaude Opus 5.5
|
4e6aeb5f72 |
Query objects in bulk and filter, count or test a list (#259)
The object queries only ever returned one object: Object by name, Child by name and Find all stop at the first hit. Getting every coin, every child or every item that passes a test needed a For each with its own bookkeeping. These nodes return the whole set as a list of Object, so For each and Find can use item straight away. - Objects by name returns every scene object with that name in scene order. - Children by name returns every match below object, nearer levels first, the same order as the singular node. - Children returns the direct children, with recursive all of them level by level. - Objects of asset returns every instance of an object asset or container by the same rule as Is asset, spawned ones included. - All four take a snapshot. Destroyed objects are never in it, disabled ones are, as with the singular nodes. - Find has a Mode setting: First, All, Any and Count. First is the default and hides the row, so existing graphs look the same. - Match follows the mode of its paired Find: done with items and indices, done with any, or done with count. An unpaired Match shows First, since the pairing only comes from the wiring. - First and Any stop at the first hit, All and Count walk the list. - Changing the mode drops edges at outputs the Match no longer has, in one undo step. SetNodeParamCommand now cleans the whole graph, but only edges that were valid before the change. - The palette entry "filter" adds a Find set to All with its Match. Found on the way: - After adding the filter entry, "find" + Enter picked Filter. The entry has node type Find, counted as an exact hit, and the tie went to the alphabet. The search now ranks by the entry id. e2e 6z-v caught it. Tests: - ./check.sh: 188 files, 2746 tests, CHECK EXIT 0. - find-modes.test.ts with 11 tests, 11 catalog cases for the four nodes, the asset input guard now expects 3. - e2e 6z-vii with 3 checks: filter from the palette, Count picked in the inspector drops the items edge, a run logs 2, 2, 2, 3, 4, "0, 2". - GM_STEPS=1-6: all passed, 278 checks. - Counter-checks fail as expected: every mode stopping early (2), Match ignoring the mode (6), cleanup on the own node only (1), no recursion (2), no inOrder (2), old ranking (1). In the browser a Match ignoring the mode fails both editor checks. Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> |
||
|
adminandClaude Opus 5.5
|
f84defb9b6 |
Pick an object of the same scene for an Object variable (#258)
An Object variable could only be set by a graph while the game runs.
A placed object always showed "(null)", although the other objects of
its scene are there to choose from and the runtime can already find
any object by its id. Now the placed object stores a reference to one
of them, and the running game turns it into the real object.
- Stored as {"$object": "<id>"}. The empty placeholder stays as it
was, so old projects load unchanged and empty still means "(null)".
- The row of an Object variable on a placed object is a dropdown with
None and every object of the scene, indented like the Hierarchy.
The same goes for Object fields in structs and Object items in
lists, also in the Variables and List tabs.
- The behavior asset keeps "(null)". An asset has no scene, so "Apply
to asset" is gone from Object rows.
- The runtime resolves the reference when the Variables or Properties
node reads it. A destroyed target reads as null, a missing one shows
"(missing)" in the row.
- Inside a container only objects of the same container are offered.
The reference keeps the template id, so every placement finds its
own copy.
- Deleting the target clears the reference in the same undo step.
Paste points references inside the pasted group at the copies and
leaves outside references alone. Create container and Unpack carry
references along with the new ids.
- A value a graph writes while running stays in the run. The scene
keeps the picked object, also in "Run in editor".
Found on the way:
- Setting an override coerced every object slot to empty, in plain
values, struct fields and list items. The shared objectPlace() now
keeps the reference.
Not done:
- No eyedropper to pick in the scene, the dropdown is enough for now.
- Deleting a template object in the container editor does not clean up
references in other scenes. They read as null there.
Tests:
- ./check.sh: 187 files, 2724 tests, CHECK EXIT 0
- e2e 1-9, 51, 57: ALL PASSED, 389 checks
- e2e 1, 57 on the final bundle: ALL PASSED, 17 checks
- 13 unit tests in object-references.test.ts, 5 checks in e2e 57
- Counter-checks: 8 unit breaks fail their tests, the browser break
without a pick list fails 57b-57d
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
|
||
|
adminandClaude Opus 5.5
|
483c34bb5c |
Let Destroy keep the children and hand them back as a list
Destroying a container used to take everything below it along. Now Destroy can remove just the object itself and pass its direct children on, so a behavior can keep working with what was inside. - New input keep children (bool, default off). When on, only the object goes. Its direct children move up to the object's parent, or to the top level if there is none. Grandchildren stay where they are. - New output children (object list) with the direct children that were kept. It is empty when keep children is off. - The children keep their place on screen. carriedTransform folds the destroyed object's position, rotation and scale into their own, the same as reparenting in the editor. - Behaviors and the rigidbody of the object are always destroyed with it and are not in the list. Moved up they would steer or simulate the parent. - World remembers which children it reparented, and syncToModel writes their new parent into the scene. A reload of the model keeps it. - Limit, read from the code only: in the editor run the contents of a placed container are not baked. Moved children there last for the run only. Tests: - ./check.sh: 170 files, 2478 tests, CHECK EXIT 0 - e2e 34 (the module with a Destroy node): ALL PASSED, 21 checks - world-sync: world matrix of child and grandchild unchanged under a rotated and scaled parent, parent survives syncFromModel, top level case, already destroyed object gives [] - destroy-keep-children: real graph Destroy(Owner) -> Log(children) logs Lid, Label without the grandchild Nail - 3 counter-probes, all caught: no world transform (1 test fails), no parent in the scene (1), behaviors and rigidbody moved up (2) Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> |
||
|
adminandClaude Opus 5.5
|
98211a8d54 |
Let a variable hold an object across behavior runs
A spawned object was only reachable in the run that spawned it. The Spawn output could not go into a variable because "object" was a port-only kind, so the next run had no way back to the instance. - "Object" is now a variable kind. The reference lives for the run only. The file stores the declaration and an empty value. - The live reference sits in slots beside the variable bag (graph/objectSlots.ts), not in it. The bag is the behavior's props, and syncToModel would have written an object into the scene. - A destroyed object, or one from a restarted or left scene, reads as nothing. A dead reference is dropped from its slot. - Keep (#229) hands the slots of kept variables on to the next call of a sub-behavior. - Properties of kind Behavior reads and writes another behavior's object variable through the same slots. - The inspector shows "(null)" for it and offers no input. - A persistent Variables asset with an object variable shows a warning under "Persistent". Saved values never keep the object, every run starts it at (null). Objects inside lists and struct fields are left out on purpose. Emptiness is checked with Equals against an empty b. A node "Is valid" does not exist yet. The test helper graphEditor().variables() now also reads the kinds of a Variables asset a node points to. Tests: - ./check.sh: 169 files, 2463 tests, CHECK EXIT 0 - e2e 6 + 23: ALL PASSED, 146 checks (new 23k, 2 checks) - e2e 32: ALL PASSED, 18 checks (new 32f-ii) - 10 unit tests in tests/core/object-variable.test.ts, one of them runs a persistent asset over two runs - 5 counter-probes (value in bag, isAlive always true, no Keep hand-over, Properties without slots, object in saved values) each fail their test - e2e check total 1406, computed only Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> |
||
|
adminandClaude Opus 5.5
|
923baf2557 |
Let Spawn take an asset over an edge and find a child by name (#237)
An asset could only be picked as a setting on the Spawn node. It could not be wired in, held in a variable or put into a list. Finding an object below the own one needed a scene-wide search by name. - "Asset" is now a kind like Animation or Sound: port, variable, list item and a new "Asset" literal node, with its own cube icon. - Spawn and Is asset have an `asset` input. It uses the key of the old setting, so a saved asset reads as the value of the input and older projects keep spawning without a migration. - New node "Child by name" searches below an object level by level. A child wins over a grandchild of the same name. Nothing found or no object gives null. Tests: - ./check.sh: 168 files, 2453 tests, CHECK EXIT 0. - 9 new unit tests in tests/core/asset-kind.test.ts, catalog cases for Spawn, Is asset, Child by name and the literal. - e2e 6z-ii (2 checks): node rows and a real drag of the literal onto `asset`. e2e 6: 119 checks passed. Spawn checks in 3 and 9 passed. - Counter-checks: depth-first search fails 1, Spawn reading only the old setting fails 3, runtime ignoring the parent fails 1. Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> |
||
|
adminandClaude Opus 5.5
|
ffb5bbe039 |
Stop a key getting stuck when Shift changes it while held (#227)
Input remembered keys under KeyboardEvent.key. Pressing a, adding Shift and letting go sent "A" on release, which matched nothing, so "a" stayed down until the next release without Shift. - New rule keyName in src/core/keys.ts lowercases a single character. So a and A are the same key, also under Caps Lock. - Input remembers per physical key (e.code) under which name it went down and releases exactly that name. So 1 released as ! is freed too, which lowercasing alone does not cover. - On key down, up and held, Key is down and Axis input compare with the same rule. A node that already stores A reacts to a. - Recording a key in the inspector stores Shift+A as a. - Limit: holding Shift before pressing 1 still sends !, and a node on 1 does not react. Nothing gets stuck by it. Tests: - 3 new unit tests in tests/core/behavior-events.test.ts: the flow from the issue, 1 released as !, and a node on A hearing a. - Without lowercasing exactly the issue test and the A test fail. - Without the code memory exactly the 1/! test fails. - ./check.sh: 159 files, 2340 tests, CHECK EXIT 0 (before 2337). - No e2e change, the check sum stays at 1377. Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> |
||
|
adminandClaude Opus 5.5
|
6fecb2e841 |
Tell On timer how late its frame is, so time minus late is exact (#224)
A timer can only fire on a frame. It fires on the first frame past each due time, so Time.time at that moment is the due time plus up to one frame. On a display that is not exactly 60 Hz this delay creeps up by a millisecond every few seconds and falls back to zero once it reaches a whole frame. The issue saw 82.009 after 82 ticks. The timer itself does not drift, it keeps the remainder when it fires. - On timer gets a number output late. It is what is left of the timer's clock after taking one interval, so time - late is exactly the due time. - When one long frame catches up several ticks, each gets its own late. The first one was due longest ago and is the latest. Tests: - New unit test in behavior-events: late 0.125 after a frame past 1.0 s, 0 on the dot, 1.5 and 0.5 for two ticks caught up in one frame. - Counter-check: late taken before the interval is subtracted fails exactly that test. Original restored with cmp. - ./check.sh: 156 files, 2300 tests, CHECK EXIT 0 (was 2299). - No e2e change. The e2e modules only wire the exec of On timer. Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> |
||
|
adminandClaude Opus 5.5
|
d444b27fae |
Let behaviors read and set tilemap cells while the game runs (#135)
A behavior could move sprites around but had no way to look at or
change the tilemap it was standing on. Doors, breakable blocks and
"is there ground ahead?" checks all need that.
- New nodes Tile at, Set tile, World to cell and Cell to world. The
conversion honours position, rotation, scale and mirroring of the
placed map. A small Tile literal node lets a graph compare what it
read against a fixed tile.
- The layer is picked by name from all tilemap layers in the project
through a new field kind. "First layer" takes the map's first one.
Because layer is an input, a text can also be wired in.
- Each placement keeps only its edited cells in liveTilemap.ts,
layered over the asset's cells. A second placement of the same map
stays untouched, and the asset itself is never written.
- A read sees a Set tile from earlier in the same flow. Drawing picks
up the edit at once and neighbouring autotile edges adapt.
- Solids see the edits straight away, so a Move in the same frame
already hits the new cell. Rapier rebuilds its shapes on the next
step.
- After Stop the map is back to what was painted. The editor run shows
the edit in the scene view while it lasts and does not touch the
project.
- An unwired tilemap input means no map, like Get position. Cells
outside the grid are refused and done reports false.
Tests:
- ./check.sh: 155 files, 2271 tests, CHECK EXIT 0 (before 2245).
- tests/core/tile-access.test.ts (14), one physics test for a floor
set at runtime, catalog entries for the five nodes.
- e2e 39,40: all passed, 86 checks (before 81), five new in 40s.
- Counter-checks: collision ignoring edits fails 3 unit tests, the
solids cache missing same-tick edits fails only the "at once" test,
drawing ignoring edits fails the 2 drawing checks, the editor run
not reporting a new tile fails only its check.
- 40s uses a still tile. The animated fixture tile redraws every frame
and hid the last counter-check at first.
- Check total 1351 + 5 = 1356, computed. CI confirmed 1351 at
|
||
|
adminandClaude Opus 5.5
|
056a622524 |
Refactoring round 6: shared sheet canvas, fewer copies (#85)
Recurring cleanup round. Behaviour is unchanged. Duplicated code in
src went from 27 clones with 299 lines to 6 clones with 56 lines
(jscpd, the two identical OFL licence texts not counted).
- SheetCanvas is the new base of the texture, pixel art and vector art
canvases. It holds background, mask, hint, panning, wheel zoom, fit,
view save and restore and the screen mapping. Pixel art keeps its
whole-pixel panning and fixed zoom steps.
- mixColor in src/core/util/color.ts replaces three copies in
animation, gradient and particles. It clamps t like the particle one.
- fingerprint now lives once in generated.ts, next to the revision
contract from #185.
- MoveCommand next to RenameCommand is the base of the three reorder
commands for tile pictures, tilemap layers and vector shapes.
- The two raycast nodes share inputs, settings and filter via rayOf.
- canvasRect() lives once in AssetTabEditor.
- Removed unused code: findPixelArt, isDrawableShape,
GeneratedPictures.has and SnapToggle.snapping. Tests now check the
same things through equivalent paths.
- 38 values used only in their own file lost their export.
- Three comments that told history now describe the current state.
The bundle stayed md5-identical for those edits.
- README lists vector art, pixel art and palette, and links the two
wiki pages.
Findings:
- PaintTilesCommand.changes is meant to prevent empty undo steps but
has not been called since #128. The rectangle tool therefore records
a no-op undo step when it paints the same tile over itself. Left as
is, because fixing it changes behaviour.
- No test covered middle-click panning in any sheet tab before. 13f
and 48a now check it.
- The default values of the ray inputs were untested. Length 1000
could become 10 without a red test. tests/core/raycast.test.ts now
covers it.
- CI measured 1308 editor checks at
|
||
|
adminandClaude Opus 5.5
|
d7c0b7cfdb |
Variables and state machines can reset with every scene (#164)
A shared variable or machine used to live either per object or for the
whole run. Levels need a third lifetime: shared like global, but built
fresh from the declarations whenever a scene is loaded.
- New scope `scene` for Variables assets and state machines. A missing
field keeps the old meaning: `global` for assets, `local` for
machines, so existing projects do not change.
- Returning to a scene that was visited before is fresh as well. There
is no memory per scene.
- A `scene` machine announces its start state again after a scene swap,
so `On state entered` in the new scene hears it. A global machine
stays quiet because it never left its state.
- The rule lives in two pure functions in `sharedState.ts`
(`carriedForward`, `restartedAssets`). BehaviorSystem only calls them.
- The inspector shows a Scope dropdown on Variables assets and a third
step on the machine dropdown, with a note on what `scene` means.
Decisions:
- `scene` and `persistent` exclude each other (variant A). The choice
dialog was cancelled, so this is an assumption to revisit. A
scene-scoped asset hides the Persistent switch, and switching to
`scene` drops the flag (undo restores it). The guard sits in
`isPersistent` itself, so no path can save values the scope throws
away anyway.
Findings:
- `clickText('Scene')` hits the Scene tab, not the menu entry. One e2e
check was red because of that, and its partner was falsely green
because it compared `undefined` with `undefined`. Both use `clickLast`
now.
Tests:
- ./check.sh: 144 files, 2142 tests, CHECK EXIT 0 (before 143 / 2133)
- 9 new unit tests in tests/core/scene-scope.test.ts
- e2e 32 fresh: ALL PASSED, 17 checks
- e2e 1-3,17,18,26,32,35 fresh: ALL PASSED, 213 checks
- 3 new e2e checks (35: scene-scoped asset resets on swap, 32h: dropdown,
note, hidden Persistent switch)
- Counter-checks bite: ignoring `restarted` fails 2 unit tests and the
new check in 35, the old announcement rule fails 1, dropping the scope
guard in `isPersistent` fails 1. Originals restored, cmp IDENTICAL.
- Check sum 1307 (1304 + 3) is computed. Last CI measurement: 1293.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
|
||
|
adminandClaude Opus 5
|
41772e53f7 |
Variables assets can keep their values from one run to the next (#166)
A game needs a high score or an unlocked level to survive the end of
a run. As agreed in the issue there are no save or load nodes. A
Variables asset gets a switch instead, and the existing Variables
nodes read and write the values as before.
- A "Persistent" checkbox in the Variables inspector. Toggling it is
one undo step, and absent means not persistent.
- The behavior system loads the saved values at start and writes them
after every frame that changed one, so a closed tab loses nothing.
- Values live in localStorage per project, not in the project file.
Another browser or person starts fresh.
- Play and "Run in editor" save apart, so trying a behavior in the
editor leaves the Play save alone.
- Saved values are read through the current declaration. A removed
variable drops out, a new one starts from its default, and a changed
kind is converted.
- "Clear saved values" in the inspector clears this asset in both
areas. The main menu gets "Clear saved data" for the whole project.
Clearing takes effect from the next run on.
Decisions:
- The switch covers the whole asset, not single variables. Mixing
both means two assets.
- A changed default in the inspector shows only after the save is
cleared. That is what persistent means.
Findings:
- The first e2e run died at "debug hook present" right after a Vulkan
error from Chrome. The second run passed, so it was a GPU flake at
start-up.
Tests:
- ./check.sh: 140 files, 2070 tests, exit 0 (before 138 / 2055).
- 15 new unit tests in tests/core/saved-values.test.ts and
tests/editor/saves.test.ts.
- GM_STEPS=32,46 fresh: ALL PASSED, 24 checks. Six new checks in
module 32 go through the UI. Module 46 knows the new menu entry.
- Counter-checks both fail as expected. Loading switched off: 2 unit
tests and 2 e2e checks fail. Editor run writing into the Play area:
1 e2e check fails.
- Check total 1278 (1272 measured by CI at
|
||
|
adminandClaude Opus 5
|
3427f84a55 |
A game can pause itself and set its own time scale (#167)
Until now only the editor toolbar could pause a running game. A pause menu inside the game had no way to stop the world while its own graph kept running, and there was no slow motion. - Five new nodes: Pause game, Resume game, Is game paused, Set time scale and Time scale. Pause and resume take effect on the next frame. - A game pause stops world time, physics, animations, particles and shader time. Only behaviors with the new "Run while paused" switch keep running. - Set time scale 0 freezes the world but graphs keep running, as agreed in the issue. - Play and Stop reset the time scale to 1, Load scene keeps it. The pause belongs to the scene, so Load scene and Restart unpause. - The toolbar pause stays separate and also freezes the menu. When the game pauses itself the status line reads "The game paused itself". - While paused, collision events are not reported, sounds keep playing, and the editor run ignores both nodes with a log line. Findings: - The first status line was longer than any before and got cut with an ellipsis. It is shorter now. - The e2e harness did not know the key "p". It does now. Tests: - ./check.sh: 133 files, 1968 tests, exit 0 (before 132 / 1952) - npm run build: exit 0 - GM_STEPS=18 fresh: ALL PASSED, 33 checks (before 26) - 16 new unit tests: 8 catalog cases, game-pause.test.ts, editor run - 7 new e2e checks in block 18i, driven by real keys in the game - Six counter-checks all bite: behavior filter, collision lock, world time, editor run, clock reset and the game clock in the browser - Check total 1217 in README is computed (1210 + 7), CI measures it Co-Authored-By: Claude Opus 5 <noreply@anthropic.com> |
||
|
adminandClaude Opus 5
|
ffdf0a8ddb |
The new node "Raycast all" answers with every collider along the ray instead of only the nearest one: it carries the same inputs and settings as Raycast (Ignore owner, Hit triggers, Layers from #158) plus "max hits" where 0 means all, and it hands back parallel lists sorted by distance - objects, colliders, points x/y, normals x/y, distances - next to count, so index i of every list speaks about the same hit; a collider counts once no matter how many convex parts its shape is built from, while a tilemap counts per cell it is hit in, and the filter sits in Solids.raycastAll like the one of #158, the one path the editor run and Play both take, so all 12 new unit tests run through describe.each against both systems; the node needed the value system to learn something it could not do - a graph list carried numbers, text, booleans and bundles but no object handles, asList turned an object into its name, so objects/colliders would have been lists of names, which loses the object when two carry the same name, and collider children usually do; Value now knows a travelling list that may hold handles and "Item at" gives such an item out as an object, ready for Destroy, Apply force or Name of, while the single door into a stored file - writeTyped/asTypeOf - runs the list through the new storedList() so every object becomes its name again and nothing living reaches a project file, which is its own unit test over JSON.stringify; three list nodes follow the handles: "Index of" compares objects by identity because a name is not the object of that name, "Set item" and "Fill" write an object as an object, and "Join text" prints the names instead of the innards; this decision was mine to make because the question ran into the MCP timeout - the alternative was a list of names plus "Object by name", which is the smaller change but lossy; 4 new e2e checks in the new block 43e (shield and floor in one go reading 2 and "145, 280", the second object answering to its name, which only a real object in a list can do, "max hits" 1 stopping at the nearest, and the node showing the row) and 18 new unit tests, 12 in raycast.test.ts, 4 on the value system and 2 in the node catalog; two counter-checks hold: not counting tilemap cells one by one drops 2 unit tests, and answering with the nearest hit only drops module 43 with 2 FAILs; one finding on the way - the node read "maxHits" while every other input carries a spoken label, because int() took the key as its label, so it has a third parameter now, and the e2e check caught that, no unit test did (#157)
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com> |
||
|
adminandClaude Opus 5
|
0fdde6cb1e |
The Raycast node filters by collision layers: the node gained a "Layers" setting, a tickbox per collision layer of the project - the same field kind the collider uses for "Collides with" - and the ray only hits what sits on a ticked layer, tilemaps counting as colliders; the default is every layer, and a graph without the param answers exactly as before, which is its own unit test; the check is one-sided on purpose, unlike the symmetric rule of #152: a ray is not a collider, so it never reads the collidesWith of the thing it hits - a collider that meets nothing is still seen by a ray - because who a ray may look at is the ray's business, and a unit test holds that case; the filter sits in Solids.raycast in front of the intersection test, which is the one path the editor run and Play both take, so every unit test runs through describe.each against both systems; NodeView did not know the field kinds layer/layers, so the node would have read "Layers: 65533" - it now shows the name of the layer, or "All layers"; 5 new e2e checks in the new block 43d (a shield on its own layer between the caster and the floor stops the ray, the "Layers" row on the node, the tickbox menu with the project's layers, the ray reaching 280 instead of 145 units once the shield's layer is unticked, and the mask read as a name) and 6 new unit tests, three against each system; two counter-checks hold: disarming the filter line drops 6 unit tests and the unticking check in module 43, and switching the formatting off makes the node check fail with the raw bits; two findings from measuring came out of it and stand in the wiki and the notes - __gm.rays() only measures while the Scene tab is in front, so a node selection blinds it and the block measures through a Log node on distance instead, and a running behavior instance keeps the graph it started with, so the editor run casts with the old mask until the instance is built anew (#158)
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com> |
||
|
adminandClaude Opus 5
|
6a31f5e0ad |
One-way platforms, raycast and collision stay with contact data: a collider can be one-way with a side it blocks from (turning with its object, drawn thick in the scene view) and a tile can be one-way from above, one-way cells never merge with solid tiles, a contact blocks only when its normal is within 45 degrees of the blocking side, the new node Ignore one-way lets an object drop through for a while, and it all holds for Move and for dynamic bodies in Rapier, where the decision is made before each step because the hook may not touch the engine (#155); the new Raycast node answers hit, object, collider, point, normal and distance in our own f64 geometry, the same in editor run and play, and the editor run draws each ray for 0.25 s (#153); On collision stay gains an interval with its own clock per pair, and stay and enter gain the contact point next to normal and impulse (#149); fixes that every Rapier collider of a tilemap had the shape of its last cell
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com> |
||
|
adminandClaude Opus 5
|
1b5e386b60 |
Move with collision reacts along the contact normal: it travels to the surface, stays flush and slides the rest of the move along it with Coulomb friction (the mean of both colliders, a tile counts as 0.5), a circle now rolls over an edge instead of catching on it, pushed dynamic bodies move off along the normal, Move gains the outputs hit, normal x and normal y, an object without its own collider moves freely, and editor run and play share the same path through Solids; contact point and normal come from our own f64 geometry (contactBetween), because Rapier's castShape lands 3e-6 px inside the wall in f32 (#150)
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com> |
||
|
adminandClaude Opus 5
|
0ff3c8b742 |
Physics stage 1b: six new nodes act on dynamic bodies in play (Apply force over the frame, independent of the frame rate, Apply impulse, Set velocity, Set angular velocity, Get velocity, Set gravity for the rest of the run), a node on an object without a dynamic body and moving a dynamic body directly each log a hint once per object, and Move with collision now pushes dynamic bodies with a mass-dependent push while the mover stays flush; Move keeps its own move-and-slide instead of Rapier's character controller, which measurably snags on seams between colliders (#147)
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com> |
||
|
adminandClaude Opus 5
|
78899b1ace |
Physics stage 1a runs on Rapier: a new Rigidbody child object (body type, mass, gravity scale, damping, fixed rotation, CCD) makes its parent fall, bounce and come to rest in play, colliders gain friction, bounciness and density, the scene gains gravity (0, 980), the new PhysicsSystem steps at a fixed 60 Hz with interpolation in world coordinates and treats a tilemap as static ground, On collision enter gains normal and impulse, play waits for Rapier and does not start without it, and the editor run keeps the old CollisionSystem; the existing collision tests run against both systems unchanged (#146)
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com> |
||
|
admin
|
1e9d21cd5d |
A game that is more than one scene needs a way from one to the next, so the graph can load one (#39)
game-maker / suite (push) Failing after 11m6s
Load scene sets a flag on the World like Stop and Restart do; the swap happens after the tick, and the last wish of a tick wins. Exactly one thing crosses over: the SharedState, so global variables and global machines keep what they know while everything local is built anew. Loading the scene that is already running rebuilds it, which is what "reset the level" means when the score must survive. A run starts either from the start scene (a new project field, set from the asset panel and marked with an arrow in the list) or from whatever scene is open. The toggle next to Play says which question is asked and remembers the answer in localStorage: it is a way of working, not part of the game. Sounds no longer end because a scene ends. A voice belongs to the behavior that started it and stops right after On destroy, so the scene swap is no longer a special case at all. For the enemy that plays its explosion and destroys itself in the same breath there is now a detached input on Play sound. The scene selector stays usable while a run plays, because a double click in the asset panel already did the same thing unguarded. It moves what the editor looks at, not what the run plays. |
||
|
admin
|
5671a38044 |
A game that stays silent is only half a game, so a sound is an asset like any other (#45)
game-maker / suite (push) Successful in 12m1s
Sounds follow the road fonts already paved: the file goes to the server content-addressed under its sha256, the project keeps a named asset that points at it, and nothing is ever re-encoded. The format is read from the file's own signature, not from what the browser claims - the same .m4a arrives as audio/mp4, audio/x-m4a or as nothing at all. Playing is two nodes. "Play sound" takes the asset and may raise or lower its volume; every call is its own voice, so two jumps in a row are two jumps heard. Its loop input is a choice of three - from the asset, on, off - because a checkbox has to spend one of its two positions on "not set" and would lose a case: an asset that loops could then never be played once. Below the graph core stays browser-free: NodeContext hands out an asset id, BehaviorSystem resolves it against the project and folds the asset's own volume and loop into the call, and only viewport/SoundLibrary knows about Web Audio. A run without a sink plays nothing instead of throwing. The CI browser is muted, so the ear is no witness: the debug hook counts started and stopped voices, and step 34 reads that counter. |
||
|
adminandClaude Opus 5
|
7babf88636 |
A state change is something the graph can react to, so the machine announces it (#53, #54, #55, #57)
game-maker / suite (push) Successful in 10m58s
Four issues that all reach for the same line: how the current state is read and written. Splitting them into four commits would mean four states of the tree that do not compile, so they arrive together. #55 start state — the machine asset carries an optional `start` holding a State node's id. Right-click a state to set or remove it, a ring in the node's title says which one it is. A dead id (the state was deleted) reads as "no start", so nothing has to clean up after a deletion. #53 entered/exited — `On state entered` and `On state exited`, one exec output per state. Every change now goes through a single `setState` that reports it; BehaviorSystem delivers it after the exec flow that caused it, `exited` of the old before `entered` of the new, round after round until the queue is empty, with a cap that stops a ping-pong graph with an endless-loop error. A local machine tells the instance that switched, a global one tells every instance holding a matching event node. The start state fires `entered` too: per instance for a local machine, once per run for a global one. #57 reading — `Current state` with `name` for showing and `id` for comparing, `Is in state` with one boolean per state. Neither has a `run`, so `read` learned `def` and `lookup`, and the catalog test knows this third kind of node. #54 seeing it — during a run the state machine tab marks every state some instance is holding faintly, and the one held by the selected scene object's instance strongly. Co-Authored-By: Claude Opus 5 <noreply@anthropic.com> |
||
|
rootandClaude Opus 5
|
8143130ed2 |
A shared value belongs to no behavior, so it becomes an asset of its own (#91)
game-maker / suite (push) Failing after 8m59s
This reverses the design of the previous commit. `PropertyDef.scope` is gone without replacement: a behavior variable is an object property again, without exception, and sharing is something you point at rather than something you declare twice. A **Variables asset** is declarations and nothing else -- no graph, no position, never placed, no tab of its own (`TAB_OF_ASSET` is already `Partial<>`, so that costs no line). A `Variables` node names one through its new `variablesAsset` setting, empty meaning the behavior's own variables as before, and then reads and writes one value per key for the whole run. Its property list follows the chosen source, which was the actual request: a value another graph declared is now offerable, where before every participant had to declare the name itself. That deletes more than it adds (-72 lines net): `globalConflicts` and its run-stopping kind clash, `SetVariableScopeCommand`, the scope picker, both object-inspector filters and the "shared by the whole run" note on the placed object. A typo is no longer a silent second variable -- naming an asset is picking from a list. And two Variables assets may carry the same key without meeting, because the asset is the key, not the name. The one shape it copies is the one that already existed: `Set state` picks its machine the same way. Lifetime is unchanged. The bag is built at `BehaviorSystem.start()` from the declarations and never written back, so playing in the editor cannot change the project -- which is the whole reason a counter must not be an object property (`World.syncToModel` would `commit()` it, and the coin counter would stand at 7 for good). Full symmetry across that gap, without mirroring anything. Two named wires: `Inspector.liveVariables` shows the values as they stand while a run is on and falls back to the declarations when it ends, and `adoptDeclarations()` takes a key into the run *only where the document changed it since the last sync*. Without that condition any unrelated project edit would snap a running counter back to its starting value; a counter-test bends exactly that and falls over. Nothing was ever cached, incidentally: `GraphInterpreter` only pulse-caches nodes without a `read`, and the variable node has one. The wire was missing. The state machine `Scope` row is now an ordinary `enum` row through `createFieldRow`. It was hand-built from an `HStack` with a ghost dropdown and began ~34px left of every value above it; the explanations beside `Local` and `Global` are gone from the menu, the sentence below the row keeps saying it. Machine scope is otherwise untouched -- `StateMachineAsset.scope`, `SetMachineScopeCommand`, `stateBag()` and its persistence all stand, so #59 stays closed as built and `Scope` as a type now carries machines alone. Six counter-proofs, each biting at its own guard. One of them did not bite at first: the suggestion list was computed twice, in `nodeSection` and `portSection`, so only the browser test covered the request itself. It is one named function now, `variableChoices`, with a unit test of its own. Co-Authored-By: Claude Opus 5 <noreply@anthropic.com> |
||
|
rootandClaude Opus 5
|
d1fcfe8b81 |
A shared value belongs to the run, so a declaration carries its scope (#91)
A variable or a state machine declared `global` keeps one value for the whole run instead of one per behavior instance. The scope sits on the declaration -- `PropertyDef.scope` and `StateMachineAsset.scope`, both optional, absence meaning `local` -- and `local` is never written, so every project made before this saves back unchanged. **The name is the key.** Two behaviors declaring a global `score` mean one variable; a behavior declaring `score` locally keeps its own. Kinds that disagree about one global name stop the run before it starts, with the two behaviors named; starting values that disagree are a warning on the behavior that declares it, and the first declaration wins (`globalConflicts`). The runtime needs no redirection layer. A global variable falls out of `schemaForObject`, so it never reaches `entity.props` -- and then the whole rule is "whoever declares the name takes their own value" (`graph/sharedState.ts`). The `Variables` node is untouched and stays transparent: switching a variable to global breaks no existing graph, because `GraphInterpreter.readAll` builds a fresh object per read anyway and only asks `port.key in all`. That same cut answers the inspector. A shared value has no owner, so the placed object shows no row for it and can hold no override -- `SetVariableScopeCommand` takes the deviations that were there and undo gives them back. Both places say it in words rather than leaving a glyph to be guessed: the declaration explains the mark below the list, and the placed object names the variable it no longer holds instead of claiming the behavior declares none -- which is what it said before, untruthfully. Screenshots of the e2e run turned that up; no check had been looking at it. `SharedState` hangs off `NodeContext`, is built in `BehaviorSystem.start()` from the *declarations* rather than from any instance (a global variable exists before its behavior is placed), and is thrown away with the run: nothing is written back, not even in the editor run. `GraphInterpreter.call` passes it on through `...ctx` while nested calls keep getting fresh local variables, which is why `program.defaults` is stripped of global keys. Two traps this hit. `defSignature`/`assetSignature` have to carry the scope or the inspector does not rebuild after the switch -- and a state machine has no rows at all, so its scope is appended to the signature by hand. And the object inspector does not go through `schemaForObject` for behaviors, it reads `asset.variables` directly; filtering in one place was not enough, and no unit test covered that path. The e2e caught it (`global: true` where false belonged), and the rule now lives in one named function, `objectRows`. Scopes `object` and `scene` are deliberately not built. The object case already has a route (`Object by name` -> `Properties`), and a run knows exactly one scene, so `scene` would be indistinguishable from `global` until #39 exists. Closes #59: a machine's scope is a word on the machine asset, not a setting per `Set state` node, so the same machine cannot live in two places at once. Co-Authored-By: Claude Opus 5 <noreply@anthropic.com> |
||
|
rootandClaude Fable 5.1
|
6141d07d4f |
Behavior lifecycle: On enable, On disable and On destroy events (#42)
game-maker / suite (push) Successful in 7m29s
Order per instance: On start -> On enable -> On update ... -> On disable -> On destroy. On enable fires right after On start and whenever the behavior comes back on (itself and its parents); On disable in the frame it goes off, the instance stays frozen. On destroy fires when the entity leaves the world (Destroy node, child of a destroyed object) and when the world is torn down on stop/restart, preceded by On disable if still on. A new On start node added while playing still does not fire for a running instance (kept as is, documented in the wiki). Co-Authored-By: Claude Fable 5.1 <noreply@anthropic.com> |
||
|
rootandClaude Fable 5.1
|
e7d82bd1a9 |
State machines: asset, tab, State branch and Set state nodes (#51)
A state machine is an asset whose graph holds one `State` node per state (no ports, name as title), edited in a new "State machine" tab that reuses the graph canvas: right-click places "State n", snap toggle shared with the Behavior tab via SnapToggle. `statemachine` is a value kind like texture (port, literal node, variable, struct field, tagged list item). Behaviors use it through `State branch` (one exec output per state) and `Set state` (one exec input per state; the interpreter now hands `run` the entry port). States live per behavior instance in NodeContext.states, with no initial state. Ports derive from the inline picker or a wired `State machine` literal; BehaviorLookup became GraphLookup with behavior(id) and machine(id). The Graph tab is labelled "Behavior" (key unchanged). Unit tests (state-machine, kinds, catalog, ports), e2e step 26 and README added. Co-Authored-By: Claude Fable 5.1 <noreply@anthropic.com> |
||
|
rootandClaude Opus 5
|
1135bf4562 |
Play sprite animations from an animation asset worn through texture
An animation asset is a list of pictures (whole textures or frames) with frames per second and Loop/Once/Ping-pong playback. A sprite wears it through its texture property, so the picker, instance overrides and the Properties node work unchanged; there is no dedicated play node. A different animation starts from its first frame, the same one set again runs on, so a graph may choose Run or Idle every frame. The clock lives on the entity, not in props, which the world writes back as overrides. The AnimationSystem ticks before behaviors, and On animation finished fires once when a Once animation reaches its end. The Animation tab plays a preview above a frame strip: reorder by dragging, Delete, duplicate, + Frames, pause/resume, and wheel zoom about the pointer with pan and Fit. Scene and Container tabs show the first frame; edit mode has no clock. Right-clicking a texture creates an animation from its frames. Button now measures its label with the bold font it draws in, which cut the Animation tab and red dialog buttons short. Co-Authored-By: Claude Opus 5 <noreply@anthropic.com> |
||
|
rootandClaude Opus 5
|
656d61f187 |
Edit the graph during play and watch values and flow run through it
The graph was only locked by five edit-mode guards in GraphCanvas. The running game reads the graph by reference each frame, so a new node, edge, changed value, disconnect or undo takes effect from the next frame. Stop discards these edits like everything else changed in play. A new On start node does not fire for a behavior that has already started. During play every data output shows the value it last produced, in the highlight colour and refreshed ten times a second. Values are kept per graph, because node ids are only unique within one; with several instances the most recent value wins. The Variables node reads the live variable bag, so only its own outputs are kept, as a snapshot. Each time an exec edge fires, a bead runs along it in 0.3 s, at most one every 0.15 s per edge, following the same curve the edge is drawn with. Beads run on game time and freeze while paused; the game logic is unchanged. Co-Authored-By: Claude Opus 5 <noreply@anthropic.com> |
||
|
rootandClaude Opus 5
|
8f92a06c84 |
Consolidate duplicated editor code, trim comments, refresh README
Split GraphCanvas (1076 -> 831 lines) into EdgeLayer and graphMenus; the port and marker menus were the same list and are now one function. Value specs of the inspector and the list tab share valueSpecs.ts, and the remaining copies (compound commands, type glyphs, typed asset lookup, name rule, play/editor world setup, marquee) are merged. Four copies had already drifted apart; merging them fixes: - "Disconnect N links" in the port menu is one undo step, not N - "+ Add collider" is hidden on a placed container instance, as in the hierarchy menu, instead of always failing - a bool property coerced from the text "false" becomes false - a port command on an unknown node type reports instead of crashing Comment-only edits leave the bundle byte-identical. README corrected in 35 places (step limit, jump-run clock, suite duration, 409 body, ...). Co-Authored-By: Claude Opus 5 <noreply@anthropic.com> |
||
|
root
|
2cf788eedd |
Let a value be a bundle of named fields
PropertyValue was number | string | boolean | list. A struct joins it, which costs two things the typechecker found rather than I did. An object on a data edge used to mean a live entity, so asEntity would have taken a struct for one and asString would have read .name off it. EntityHandle now carries a symbol brand – a symbol so no field name can impersonate it, and it never serializes, which suits a thing that exists only while the game runs. It is built in exactly one place. String(value) would have written a struct as [object Object] at 39 call sites. They go through textOf(), which is identical for primitives. normalizeGraph dropped everything but primitives from node params, so the List node lost its value on every save ([3,1,4] round-tripped to undefined). Variables were spared: they have a schema, params have none. |
||
|
rootandClaude Opus 5
|
3ab8d88ad6 |
Let On key down repeat while the key stays held
A held key fired once and then nothing, so sliding a Tetris piece sideways or walking a menu meant building a timer next to every key node. Two settings on the node do it now: Repeat after and Repeat interval, both in milliseconds so the usual values stay whole numbers (300, 50) instead of 0.3 and 0.05. A delay of 0 keeps the node exactly as it was, an interval of 0 means every frame. The browser's own auto-repeat is deliberately not used - Input.press has always dropped it - because its delay and rate are an operating-system setting of the player's, not a game's. The repeat is built from the measured hold time instead, per node, so two nodes on one key keep their own clocks. The rule itself is a pure function in keyRepeat.ts and is checked without a world. Both rows stay off the node body while the delay is 0: two lines of "0" on every key node in every graph would be noise, and the screenshot said so. NodeDef gains hiddenParams for that; the inspector still shows them. Co-Authored-By: Claude Opus 5 <noreply@anthropic.com> |
||
|
root
|
6702ff8abe |
Let a behavior be a node in another graph
A behavior that has a Start and an End node can now be dropped into any other graph as a node of its own. What is declared on the start node becomes the inputs of that node, what hangs on the end node its outputs; the port list is derived from the sub graph, not copied, so declaring a port in one graph grows the node in the other without touching it. The node carries the behavior's name and the palette lists behaviors by name, so a call is one grab instead of a node plus a dropdown. An embedded behavior has no object and therefore no place for variables: every call starts on the asset defaults and communicates only through its ports. That is the conservative direction - state can still be added later, and shared state already has a home in a behavior object in the scene. Node ids are unique per graph only, so each call gets its own pulse cache; without that, two graphs would collide. Renaming a port used to silently drop the value typed on the calling node. It is carried along now, project wide, like the edges. |
||
|
root
|
8f31afac37 |
Let a behavior run while the editor is open
A behavior object carries a "Run in editor" switch next to Enabled. When it is on, the behavior ticks outside of Play and works on the saved model directly - Unity semantics: what it moves is a real change, autosaved and not undoable. Input stays with the editor, so On key never fires while typing. The editor run never bakes placed containers into the model, since that would silently drop their instanceEdits. syncToModel reports whether it wrote anything, and the dirty flag is only raised on change - otherwise a behavior moving something every frame would trigger ~60 saves a second. |
||
|
rootandClaude Opus 5
|
d54a620ebd |
Add ESLint and Prettier, and close the node test gaps
Tooling: - Prettier as the single formatting authority (110 columns, single quotes, measured against the existing style); Markdown excluded because table-cell padding turns the README glossary into 1000-character lines. - Type-aware ESLint ending in eslint-config-prettier, so a rule always means "this is a bug", never "this looks different". - .editorconfig and an `npm run check` that runs typecheck, lint, format and tests in one go. Findings fixed on the first run: three more duplicate imports, four String(unknown) calls (parameter types narrowed instead of casts), two dead initialisers, two redundant casts, a console.log for a real error. Two warnings were false here and are disabled with a reason in place. Tests 132 -> 269: - node-catalog.test.ts covers every node with a run(), with a guard that fails when a new node has no row. - behavior-events.test.ts covers the ten event nodes through a running World, checking timing rather than existence. - Input's state machine (press/release/releaseAll) is reachable without DOM events now; the DOM handlers are thin adapters. Compare fell back to == without a configured operator although the schema default is <; aligned. Co-Authored-By: Claude Opus 5 <noreply@anthropic.com> |
||
|
rootandClaude Fable 5.1
|
1eb28314cf |
Refactoring: one file per node, consistent comments, shared helpers, split large modules
- Graph: nodes.ts split into nodes/<category>/<Type>.ts (62 files) with shared.ts factories and index.ts registry; NodeContext/values/NodeRegistry separated, writeTyped() replaces duplicated typed writes - Comments: one style (JSDoc on non-obvious exports, // for decisions and traps), wrong/stale comments fixed or removed, ids.ts now real 10 base-36 chars - Core: chainOf, shared worldPosition/editorPosition core, commands/require.ts, commands/naming.ts, util/list.ts, setBagValue/toPosition/propDef; dead code removed (isBehaviorAsset, SCENE_OBJECT_SCHEMA, CommandStack.subscribe, Input.axis, setMode, titleText, World.worldPosition, unused ctor params) - Editor: Inspector split into inspector/ sections, App.ts into Editor.ts + debugHook.ts + shortcuts.ts, Viewport into items.ts + symbols.ts, shared "Add collider" action, unified type labels/swatches - UI toolkit: Widget.trackHover/onPointerRelease, drawControlBox, math helpers, Popup.openBelow, Menu/Dialog/ColorPicker/ListRow in own files, named Theme sizes - Tools: seed-demo/smoke-demo and demo-check project removed, tools/lib (harness, projects, builders), e2e.mjs as runner over tools/e2e/*.mjs sections - Tests: tests/helpers.ts replaces copied fixtures and NodeContext doubles Co-Authored-By: Claude Fable 5.1 <noreply@anthropic.com> |
||
|
rootandClaude Opus 5
|
3234eb480f |
Editor offset, global On click, Coin container in the jump-and-run seed
- SceneObject.editorOffset (x/y): shifts only where an object is drawn in the Scene tab, cascades to children, undo-able with a reset action. Never written into container templates. - On click without an owner now fires for any click inside the camera frame instead of hit-testing the (editor-only) behavior symbol. - seed-jumprun: coins are a "Coin" container (sprite + trigger), nested containers are expanded recursively, Destroy targets the coin's parent, and the clock uses a Ceil node instead of ToText. Co-Authored-By: Claude Opus 5 <noreply@anthropic.com> |
||
|
rootandClaude Opus 5
|
76aa441dce |
Enabled switch, text assets, mouse input and the jump-and-run example game
Engine additions that the example game needed: - `enabled` as a shared property of every placeable asset (default on, an override on the scene object). A switched-off object is not drawn, does not collide and its behavior does not run - and neither does anything parented below it. Disabled objects are now hidden in the scene view as well, so the editor shows what the game shows; they stay in the hierarchy panel, which is where they are selected and switched back on. - Asset type `text` (text, fontSize, color, align), rendered in scene and game. - Pointer input in the game view: `On click`, `Mouse position`, `Mouse button`, `Is hovered`, hit-tested against colliders, else sprite/text footprints. - New nodes: Set/Is enabled, Set text, Is asset, Name of, Equals, To text, Join text, Floor/Ceil/Round, Modulo, Random, Time, Restart game. Tooling: shared CDP harness (tools/harness.mjs), central project registry with a guard that keeps destructive scripts off the playground (tools/projects.mjs), plus smoke suites for the demo scene and the jump-and-run game. Co-Authored-By: Claude Opus 5 <noreply@anthropic.com> |
||
|
rootandClaude Fable 5.1
|
91ee2feadd |
Spawn node: place assets at runtime into the play copy, Spawner demo behavior
Co-Authored-By: Claude Fable 5.1 <noreply@anthropic.com> |
||
|
rootandClaude Fable 5.1
|
c3a533c4e5 |
Editing while playing: play runs on a runtime copy, new Game tab (Scene | Game | Graph)
Co-Authored-By: Claude Fable 5.1 <noreply@anthropic.com> |
||
|
rootandClaude Fable 5.1
|
6ecb20cf02 |
Trigger colliders and Move and slide against solid colliders
- Collider property isTrigger (no blocking, still reports enter/stay/exit) - Node 'Move and slide' with blocked x/y outputs, axis-wise resolution - axisSeparation/axisCorrection geometry for box/box, circle/circle, box/circle - Amber outline for trigger colliders in the viewport - Demo mover uses Move and slide; E2E step 15b, 7 new unit tests Co-Authored-By: Claude Fable 5.1 <noreply@anthropic.com> |
||
|
rootandClaude Fable 5.1
|
0a59513b74 |
Collider asset type, CollisionSystem and collision nodes
- Asset type 'collider' (box/circle) placed as child of a body object - 'Add collider' shortcut (hierarchy context menu + inspector) - CollisionSystem with enter/stay/exit pairs, sibling colliders excluded - Nodes: On collision enter/stay/exit, Is touching - Green outline in edit mode, hidden in play Co-Authored-By: Claude Fable 5.1 <noreply@anthropic.com> |
||
|
rootandClaude Fable 5.1
|
26d5edc496 |
Scene hierarchy: parentId with local positions, tree panel, reparenting and Parent node
Co-Authored-By: Claude Fable 5.1 <noreply@anthropic.com> |
||
|
rootandClaude Fable 5.1
|
922774778b |
Behaviors with Blueprint-style node graph, graph editor tab and BehaviorSystem
Co-Authored-By: Claude Fable 5.1 <noreply@anthropic.com> |