A graph had no way to know how big a picture is. An icon sprite with a
fixed size therefore stretched every icon of another size, an 8x8
pixel-art icon in a 16x16 slot was drawn twice as big.
- New data node Texture size. It takes a texture, a frame or a pixel
art and hands out width and height in pixels, 0 x 0 for none.
Wired into a sprite's width and height, the picture shows pixel for
pixel.
- GraphLookup gets textureSize. The project answers it with the same
pictureSize rule a sprite uses to size itself.
Tests:
- ./check.sh: 2749 tests, CHECK EXIT 0.
- 2 catalog cases (a picture, no picture) and one test against a real
project: pixel-art sheet, single frame, missing texture.
- No e2e check and no counter-check for this node.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
The object queries only ever returned one object: Object by name,
Child by name and Find all stop at the first hit. Getting every coin,
every child or every item that passes a test needed a For each with
its own bookkeeping. These nodes return the whole set as a list of
Object, so For each and Find can use item straight away.
- Objects by name returns every scene object with that name in scene
order.
- Children by name returns every match below object, nearer levels
first, the same order as the singular node.
- Children returns the direct children, with recursive all of them
level by level.
- Objects of asset returns every instance of an object asset or
container by the same rule as Is asset, spawned ones included.
- All four take a snapshot. Destroyed objects are never in it,
disabled ones are, as with the singular nodes.
- Find has a Mode setting: First, All, Any and Count. First is the
default and hides the row, so existing graphs look the same.
- Match follows the mode of its paired Find: done with items and
indices, done with any, or done with count. An unpaired Match shows
First, since the pairing only comes from the wiring.
- First and Any stop at the first hit, All and Count walk the list.
- Changing the mode drops edges at outputs the Match no longer has,
in one undo step. SetNodeParamCommand now cleans the whole graph,
but only edges that were valid before the change.
- The palette entry "filter" adds a Find set to All with its Match.
Found on the way:
- After adding the filter entry, "find" + Enter picked Filter. The
entry has node type Find, counted as an exact hit, and the tie went
to the alphabet. The search now ranks by the entry id. e2e 6z-v
caught it.
Tests:
- ./check.sh: 188 files, 2746 tests, CHECK EXIT 0.
- find-modes.test.ts with 11 tests, 11 catalog cases for the four
nodes, the asset input guard now expects 3.
- e2e 6z-vii with 3 checks: filter from the palette, Count picked in
the inspector drops the items edge, a run logs 2, 2, 2, 3, 4, "0, 2".
- GM_STEPS=1-6: all passed, 278 checks.
- Counter-checks fail as expected: every mode stopping early (2),
Match ignoring the mode (6), cleanup on the own node only (1), no
recursion (2), no inOrder (2), old ranking (1). In the browser a
Match ignoring the mode fails both editor checks.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Searching a list with For each needs the test result wired back into
break on the left of the loop node. The wires then run across the node
and the graph reads badly. Find … Match keeps the whole search flowing
left to right, while the test in between stays a free graph.
- Find takes exec and list and offers item and index. It sets them to
each element in turn and has no exec output of its own.
- Match reads its bool input match once per element. The first true
value continues at found with item and index of the hit. No hit or an
empty list continues at not found with an empty item and index -1.
- The pair is derived from the wiring and stored nowhere. A Match
belongs to the Find whose item or index its test is built from. Copy,
paste and undo therefore need no extra code (findBlock.ts).
- An unpaired Find or Match, two Matches on one Find and a Match fed
by two Finds show a warning on the node. At run time the flow ends at
an unpaired Find and the console says so.
- Adding Find from the palette places its Match 480 px to the right in
the same undo step.
- The graph draws a quiet frame behind Find, Match and the nodes of the
test. Literals feeding the test from outside stay outside the frame.
- The test consists of data nodes only, like the break of For each.
Tests:
- ./check.sh: 184 files, 2694 tests, CHECK EXIT 0
- e2e GM_STEPS=1-6: ALL PASSED, 272 checks
- New find-match.test.ts with 12 tests, 2 catalog cases, e2e 6z-v
with 3 checks using a real mouse.
- Counter-checks: ignoring the test fails 4 unit tests, no ambiguity
check fails 2, framing everything fails 1. In the browser, no frame
and no Match from the palette each fail their check.
- Check total in README: 1517.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
A list could only grow through Join lists, and that takes its b apart:
a struct becomes one item per field and a list is joined. A list of
structs such as loot could not grow at all.
- Add item returns a new list with value as exactly one more item. A
struct or a list goes in whole. The list that came in is left alone,
like with Set item.
- index -1 or unset appends. Otherwise the item goes in before that
index. An index outside the list appends, so the value is not lost.
- The rule that an item takes the kind of its slot moved out of Set item
into fitToSlot. Both nodes use it, Set item behaves as before.
- No e2e check and no browser look. The node is covered by unit tests.
Tests:
- ./check.sh: 180 files, 2634 tests, CHECK EXIT 0
- 7 catalog cases, 4 cases in list-of-structs.test.ts, and index in the
whole-number inputs of texture-kind.test.ts
- Counter-check: taking the value apart like Join lists fails 3 tests
- This commit alone: tsc and the three touched unit files pass
(337 tests)
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Finding the first item that matches took Count, Repeat, Item at and a
Branch, and the loop could not stop once it had found something. A graph
has no lambdas, so the predicate is an input that is read every round.
- For each runs body once per element, with item and index set, and
goes on at done.
- Its break input is read anew before every round, after item is set.
Once it is true the loop ends there and that round's body does not
run.
- done sees the matching item and index with stopped true. Without a
match it sees no item, index -1 and stopped false, the OrDefault.
- RepeatResult has optional items, stopWhen, stopped and exhausted.
GraphInterpreter.loop reads them, Repeat runs as before.
Tests:
- ./check.sh: 180 files, 2623 tests, CHECK EXIT 0
- e2e GM_STEPS=1-6: ALL PASSED, 269 checks
- 5 interpreter tests in graph.test.ts, 2 catalog cases
- e2e 6z-iv: the palette creates the node, and a search for
Name == "Gold" in Axe, Gold, Bow, Gold logs "1true"
- Counter-checks: without the break check 2 unit tests fail, and with
break not read over its edge 6z-iv fails
- This commit alone: tsc and the three touched unit files pass
(349 tests)
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Every animation in a behavior had to build its interpolation from
Subtract, Multiply and Add, once per axis. The gold pickup in
"Garden of Sacrifices" needed about 30 nodes for that alone. A single
Lerp node with an ease makes those chains one node each.
- Lerp has the inputs a (default 0), b (1) and t (0) and the output
result. It sits in the data category next to Clamp.
- The Ease setting offers Linear, In, Out and In-out, all quadratic.
The node row shows it as "Ease: Out".
- t is held in 0..1. A timer that overshoots in the last frame still
lands exactly on b.
Tests:
- ./check.sh: 178 files, 2583 tests, CHECK EXIT 0
- 7 new cases in the node catalog test. Without the clamp on t,
2 of them fail.
- e2e 6z-iii (2 checks): typing "lerp" in the palette adds a linear
Lerp, and picking "Out" in the inspector reaches the node and its
row. GM_STEPS=1-6: ALL PASSED, 267 checks.
- README check sum is 1459, computed, not counted.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
An asset could only be picked as a setting on the Spawn node. It could
not be wired in, held in a variable or put into a list. Finding an
object below the own one needed a scene-wide search by name.
- "Asset" is now a kind like Animation or Sound: port, variable, list
item and a new "Asset" literal node, with its own cube icon.
- Spawn and Is asset have an `asset` input. It uses the key of the old
setting, so a saved asset reads as the value of the input and older
projects keep spawning without a migration.
- New node "Child by name" searches below an object level by level.
A child wins over a grandchild of the same name. Nothing found or no
object gives null.
Tests:
- ./check.sh: 168 files, 2453 tests, CHECK EXIT 0.
- 9 new unit tests in tests/core/asset-kind.test.ts, catalog cases for
Spawn, Is asset, Child by name and the literal.
- e2e 6z-ii (2 checks): node rows and a real drag of the literal onto
`asset`. e2e 6: 119 checks passed. Spawn checks in 3 and 9 passed.
- Counter-checks: depth-first search fails 1, Spawn reading only the
old setting fails 3, runtime ignoring the parent fails 1.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Choosing between two values meant a Branch with the whole action
twice behind it, for example two Play animation nodes that differ
only in the animation. Every later change had to be made in both.
Select picks the value, so the action stays single.
- Select is a data node with the inputs condition, false and true
and the output value. It passes on "true" if the condition holds,
else "false". An unconnected condition counts as false, and an
empty picked input gives null.
- The ports are named false and true, not a and b, so nobody has to
guess which input is which. The order false, true follows Unreal's
Select and Blender's Switch.
- false, true and value share one type through `sharedType`, like
First not empty. With two Animation literals plugged in, value
takes their type and fits Play animation directly.
- Both inputs are always evaluated. Data nodes have no side effects,
so that does not matter.
Tests:
- ./check.sh: 160 files, 2363 tests, CHECK EXIT 0 (before 2356).
- 5 cases in tests/core/node-catalog.test.ts and 2 in
tests/core/shared-port-type.test.ts.
- Counter checks: with the inputs swapped all 5 catalog cases fail,
without sharedType exactly the type test fails.
- No e2e change, the sum stays at 1380.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
A behavior could move sprites around but had no way to look at or
change the tilemap it was standing on. Doors, breakable blocks and
"is there ground ahead?" checks all need that.
- New nodes Tile at, Set tile, World to cell and Cell to world. The
conversion honours position, rotation, scale and mirroring of the
placed map. A small Tile literal node lets a graph compare what it
read against a fixed tile.
- The layer is picked by name from all tilemap layers in the project
through a new field kind. "First layer" takes the map's first one.
Because layer is an input, a text can also be wired in.
- Each placement keeps only its edited cells in liveTilemap.ts,
layered over the asset's cells. A second placement of the same map
stays untouched, and the asset itself is never written.
- A read sees a Set tile from earlier in the same flow. Drawing picks
up the edit at once and neighbouring autotile edges adapt.
- Solids see the edits straight away, so a Move in the same frame
already hits the new cell. Rapier rebuilds its shapes on the next
step.
- After Stop the map is back to what was painted. The editor run shows
the edit in the scene view while it lasts and does not touch the
project.
- An unwired tilemap input means no map, like Get position. Cells
outside the grid are refused and done reports false.
Tests:
- ./check.sh: 155 files, 2271 tests, CHECK EXIT 0 (before 2245).
- tests/core/tile-access.test.ts (14), one physics test for a floor
set at runtime, catalog entries for the five nodes.
- e2e 39,40: all passed, 86 checks (before 81), five new in 40s.
- Counter-checks: collision ignoring edits fails 3 unit tests, the
solids cache missing same-tick edits fails only the "at once" test,
drawing ignoring edits fails the 2 drawing checks, the editor run
not reporting a new tile fails only its check.
- 40s uses a still tile. The animated fixture tile redraws every frame
and hid the last counter-check at first.
- Check total 1351 + 5 = 1356, computed. CI confirmed 1351 at cb32b4b.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
A graph that reads an optional value needed a chain of Equals and
Branch just to fall back on a default. The new node does that in one
step: it passes a through unless a is empty, in which case b comes
out. Both ports are any, so it works for numbers, text, lists,
structs and objects alike.
- `First not empty` sits in the data category with two any inputs
`a` and `b` and one any output `value`. Are both empty, b comes
out, so the second input doubles as the default.
- `isEmptyValue` in values.ts holds the rule as a pure function:
nothing connected, 0, an empty text, false, an empty list, and a
struct whose fields are all empty.
- The struct case is what covers a position: behavior graphs have no
vector type of their own, so (0, 0) arrives as a struct. `{x: 0,
y: 2}` therefore counts as set, `{x: 0, y: 0}` as empty.
Findings:
- A real 0 or false on a is passed over. That follows from counting
0 as empty and is written down in the issue.
- The output stays any. Ports that inherit their type from an input
do not exist in the graph; `Item at` has the same shape.
Tests:
- ./check.sh: 142 files, 2104 tests, exit 0 (was 2094).
- 10 new catalog cases: a set, a unconnected, 0, "", false, an empty
list, a position (0, 0), a struct with one field set, an object,
and both empty.
- Counter-check: with structs never empty and 0 a real value exactly
those two cases fail, the rest stays green. Originals restored and
compared with cmp, then rebuilt.
- No e2e check: single data nodes have no e2e coverage here, the
palette fills itself from BUILT_IN_NODES.
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
Until now only the editor toolbar could pause a running game. A pause
menu inside the game had no way to stop the world while its own graph
kept running, and there was no slow motion.
- Five new nodes: Pause game, Resume game, Is game paused, Set time
scale and Time scale. Pause and resume take effect on the next frame.
- A game pause stops world time, physics, animations, particles and
shader time. Only behaviors with the new "Run while paused" switch
keep running.
- Set time scale 0 freezes the world but graphs keep running, as
agreed in the issue.
- Play and Stop reset the time scale to 1, Load scene keeps it. The
pause belongs to the scene, so Load scene and Restart unpause.
- The toolbar pause stays separate and also freezes the menu. When the
game pauses itself the status line reads "The game paused itself".
- While paused, collision events are not reported, sounds keep
playing, and the editor run ignores both nodes with a log line.
Findings:
- The first status line was longer than any before and got cut with
an ellipsis. It is shorter now.
- The e2e harness did not know the key "p". It does now.
Tests:
- ./check.sh: 133 files, 1968 tests, exit 0 (before 132 / 1952)
- npm run build: exit 0
- GM_STEPS=18 fresh: ALL PASSED, 33 checks (before 26)
- 16 new unit tests: 8 catalog cases, game-pause.test.ts, editor run
- 7 new e2e checks in block 18i, driven by real keys in the game
- Six counter-checks all bite: behavior filter, collision lock, world
time, editor run, clock reset and the game clock in the browser
- Check total 1217 in README is computed (1210 + 7), CI measures it
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
Play, Pause and Stop animation take the animation on a port instead of a
fixed setting, fed by the new Animation literal or a list item tagged
`$animation`. Playing an animation already running keeps its frame but
counts it as started last, so turning back to a walk that never stopped
shows that walk. The actor demo walks through one Play animation over
`ItemAt(walk, facing)` again and stops every animation to stand.
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
Part (a) of the animation rework: model, commands, saving, runtime and nodes.
- AnimationAsset holds a root (sprite, text, container or scene) and rows; a row keys one
property of the root or of an object inside it, keys sit on whole frames.
- The last key decides the length (its frame counts as a frame of its own). The playhead runs
between frames, so numbers and colors blend every tick even at 10 fps; everything else holds.
- Playback gains `once-reset`, which puts back what was there before the start. A row can be
relative, adding to where its target stood.
- Play / Pause / Stop animation act on an object; each instance plays on its own, the later
start wins on a shared property, and a behavior writing the same property still writes last.
- A sprite no longer wears an animation through `texture`. "Create animation from texture"
builds a sprite plus a texture row keyed frame by frame instead.
- The Animation tab shows a placeholder until the timeline editor (part b) lands.
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
Set state and State branch derived their ports from the graph, so a machine
that came out of a variable or a list had no ports at all: nothing to set,
nowhere to branch. It could be passed around but not operated.
stateByName() resolves id first, then name; a name two states carry answers
with nothing, the same rule transitionTo already follows for two transitions
of one name — without something in the graph that decides between them, any
pick would be a guess.
Set state by name takes the machine and a text, and has a second exec output
not found, so a typo is not swallowed in silence. State branch gains a
derived else that fires whenever no state output matches — no state set, a
state of another machine, or a machine that arrives as a value and therefore
has no state outputs at all. A flow that enters State branch now always
leaves it somewhere.
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
Load scene sets a flag on the World like Stop and Restart do; the swap
happens after the tick, and the last wish of a tick wins. Exactly one
thing crosses over: the SharedState, so global variables and global
machines keep what they know while everything local is built anew.
Loading the scene that is already running rebuilds it, which is what
"reset the level" means when the score must survive.
A run starts either from the start scene (a new project field, set from
the asset panel and marked with an arrow in the list) or from whatever
scene is open. The toggle next to Play says which question is asked and
remembers the answer in localStorage: it is a way of working, not part
of the game.
Sounds no longer end because a scene ends. A voice belongs to the
behavior that started it and stops right after On destroy, so the scene
swap is no longer a special case at all. For the enemy that plays its
explosion and destroys itself in the same breath there is now a
detached input on Play sound.
The scene selector stays usable while a run plays, because a double
click in the asset panel already did the same thing unguarded. It moves
what the editor looks at, not what the run plays.
Sounds follow the road fonts already paved: the file goes to the server
content-addressed under its sha256, the project keeps a named asset that
points at it, and nothing is ever re-encoded. The format is read from the
file's own signature, not from what the browser claims - the same .m4a
arrives as audio/mp4, audio/x-m4a or as nothing at all.
Playing is two nodes. "Play sound" takes the asset and may raise or lower
its volume; every call is its own voice, so two jumps in a row are two
jumps heard. Its loop input is a choice of three - from the asset, on,
off - because a checkbox has to spend one of its two positions on "not
set" and would lose a case: an asset that loops could then never be
played once.
Below the graph core stays browser-free: NodeContext hands out an asset
id, BehaviorSystem resolves it against the project and folds the asset's
own volume and loop into the call, and only viewport/SoundLibrary knows
about Web Audio. A run without a sink plays nothing instead of throwing.
The CI browser is muted, so the ear is no witness: the debug hook counts
started and stopped voices, and step 34 reads that counter.
Four issues that all reach for the same line: how the current state is
read and written. Splitting them into four commits would mean four
states of the tree that do not compile, so they arrive together.
#55 start state — the machine asset carries an optional `start` holding
a State node's id. Right-click a state to set or remove it, a ring in
the node's title says which one it is. A dead id (the state was deleted)
reads as "no start", so nothing has to clean up after a deletion.
#53 entered/exited — `On state entered` and `On state exited`, one exec
output per state. Every change now goes through a single `setState`
that reports it; BehaviorSystem delivers it after the exec flow that
caused it, `exited` of the old before `entered` of the new, round after
round until the queue is empty, with a cap that stops a ping-pong graph
with an endless-loop error. A local machine tells the instance that
switched, a global one tells every instance holding a matching event
node. The start state fires `entered` too: per instance for a local
machine, once per run for a global one.
#57 reading — `Current state` with `name` for showing and `id` for
comparing, `Is in state` with one boolean per state. Neither has a
`run`, so `read` learned `def` and `lookup`, and the catalog test knows
this third kind of node.
#54 seeing it — during a run the state machine tab marks every state
some instance is holding faintly, and the one held by the selected
scene object's instance strongly.
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
A state keeps its `in`/`out` exec pins in the model and the editor never draws
them. That is the whole trick: connecting, undo, deleting a state and saving all
keep working untouched, because `normalizeGraph` filters nodes and never edges,
and no edge ever checks its port key against a NodeDef. Only two places change --
`NodeView.redraw` stops drawing the row, and `portAt` refuses to hand one out, so
an invisible pin cannot be grabbed either.
Transitions are drawn by right-clicking a state, `Make transition`, then clicking
the target. The armed mode takes the same shape as a live drag, so the existing
preview draws it with no second code path, and it dies with Escape, a click on
empty canvas or a switch to another asset.
Removing the pins removed the only handle a transition had: edges have no
hit-test anywhere, and the pin right-click was the sole route to Disconnect.
The inspector's TRANSITIONS OUT / TRANSITIONS IN lists are therefore not a
convenience, they are the delete path.
`GraphEdge` gained an optional `label`, which `normalizeGraph` has to pass
through explicitly or a saved name is dropped on load. `State transition`
replaces `Next state`: it takes the machine on an input port and the name from a
picker, and resolves against the *current* state. Names are deliberately not
unique across a machine -- two states may both have an `alarm` -- so a node named
`alarm` moves whichever state has one, and an empty name follows the single
unnamed edge.
The geometry moved to a Pixi-free `transitions.ts`: a gap to the box border, and
a fan that puts a pair of opposite edges beside each other instead of on top of
each other. Keeping it as plain maths is what let a screenshot bug become a unit
test -- an earlier pin-to-pin line ran under the target node and took its
arrowhead with it, because `nodeLayer` sits above `edgeLayer`.
One limit stands and is not fixed here: `ConnectCommand` rejects a second edge
between the same two states ("Already connected"), because every transition
hangs off the same two ports. With names, `A --alarm--> B` beside
`A --seen--> B` is a sensible pair, so this is worth its own issue.
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
The asset type `particles` is placeable and carries a graph at the same time —
`behavior` was the blueprint. Because a continuous emitter gives birth to particle n
at time n/rate, the whole field is a function of the clock rather than of the frames:
no ring-buffer bookkeeping, exact time jumps, reproducibility as a measurable property.
compile.ts follows compileShader's frame but emits JS closures into a Float64Array
instead of GLSL, and without eval; a node with two consumers is evaluated once.
Drawing is one Pixi ParticleContainer per source, so one draw call.
Collision, wind and braking in flight are out for good — that is the price of the
formula model, not an omission.
The tab count goes from nine to ten, which is exactly the case #84 was built for one
day earlier: at 1280 px the row no longer holds every tab, so guard 14b now asks for
hidden.length > 0 instead of === 0.
A shader is an asset carrying a node graph (Texture color, Output, Property,
Color, Add/Subtract/Multiply/Divide, Mix, Luminance) that compiles to the GLSL
fragment of a Pixi filter. The Shader tab reuses the Behavior canvas; a sprite
wears a shader through its Shader picker, and the rows below it are the
graph's Property nodes. Property schema, resolution and deviation take the
project because a sprite's rows now live in another asset. The built-in
registry of the prototype is gone; "Adjust colors" ships as a graph in the
fixture and the three example games.
Co-Authored-By: Claude Fable 5.1 <noreply@anthropic.com>
Order per instance: On start -> On enable -> On update ... -> On disable
-> On destroy. On enable fires right after On start and whenever the
behavior comes back on (itself and its parents); On disable in the frame
it goes off, the instance stays frozen. On destroy fires when the entity
leaves the world (Destroy node, child of a destroyed object) and when the
world is torn down on stop/restart, preceded by On disable if still on.
A new On start node added while playing still does not fire for a
running instance (kept as is, documented in the wiki).
Co-Authored-By: Claude Fable 5.1 <noreply@anthropic.com>
A state machine is an asset whose graph holds one `State` node per state
(no ports, name as title), edited in a new "State machine" tab that reuses
the graph canvas: right-click places "State n", snap toggle shared with the
Behavior tab via SnapToggle. `statemachine` is a value kind like texture
(port, literal node, variable, struct field, tagged list item).
Behaviors use it through `State branch` (one exec output per state) and
`Set state` (one exec input per state; the interpreter now hands `run` the
entry port). States live per behavior instance in NodeContext.states, with
no initial state. Ports derive from the inline picker or a wired
`State machine` literal; BehaviorLookup became GraphLookup with
behavior(id) and machine(id).
The Graph tab is labelled "Behavior" (key unchanged). Unit tests
(state-machine, kinds, catalog, ports), e2e step 26 and README added.
Co-Authored-By: Claude Fable 5.1 <noreply@anthropic.com>
- `.gitignore` said `index.html` unanchored, which also caught the Vite source page;
a fresh clone could neither `dev` nor `build`. Anchored to `/index.html`, page added.
- Removed GM_REMOTE (tools/remote/gm-browser.ps1 and the ssh/scp branch in browser.mjs):
the Windows test machine is gone and the only flaky check that lived on it is closed (#37).
- Removed `npm run preview`, undocumented and unused.
- Comments: wrong number in collider.test.ts (250 → 200), the "declarations used to…"
history in listItems.ts and friends, the 24 px/28 contradiction, section banners in
nodes/index.ts, node-catalog.test.ts and api/index.php, name paraphrases, and the stale
step numbers in tools/e2e/11-…23- from the old global count.
- README: asset types include `animation`, kind order Number/Text/Boolean, tagged colour
and texture items, 6/5 kinds, the `Texture` node, `./build.sh`, PROJECT_FORMAT_VERSION,
and the file tree (kinds.ts, listItems.ts, propertyPorts.ts, Breadcrumb.ts, beads.ts,
tools/assets/).
- tests/helpers.ts takes the duplicated `findObject` and `sceneWithCamera`.
Proof: ./check.sh 797 tests, full e2e ALL PASSED 633 checks against this bundle.
Co-Authored-By: Claude Fable 5.1 <noreply@anthropic.com>
A kind like colour or texture used to be spelled out in five parallel
lists, its port type, its empty value, its glyph, its label and its list
tag - 22 literal places for texture alone. core/properties/kinds.ts now
holds one row per kind and the rest is derived from it, so adding a kind
is one row. The five literal nodes collapse into literals.ts, the six
kind menus into one helper.
Number, Text, Boolean is now the one order everywhere; the variable and
port menus used to list Boolean before Text.
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
- `Texture` and `Color` can be picked as a variable kind, a struct field
kind and a declared port kind; a new `Texture` node hands a picture id
into the graph. Declared, a texture is its bare id – the `$texture` tag
stays a list-only thing.
- The `String` node is labelled "Text" like its kind; the type id stays.
- Whole-number inputs (`Item at`, `Set item`, `Sub list`, `Fill`,
`Repeat`, `Substring`, `To text`) show no decimals (`int()` in shared.ts).
- All server projects are reseeded, so `legacyNodes.ts`,
`migrateDeclaredLists` and the `ownerId` fallback go, with their tests.
- Note `reseed-because-of-list` moved to done/; new note `refactor-types`.
Co-Authored-By: Claude Fable 5.1 <noreply@anthropic.com>
An animation asset is a list of pictures (whole textures or frames) with
frames per second and Loop/Once/Ping-pong playback. A sprite wears it
through its texture property, so the picker, instance overrides and the
Properties node work unchanged; there is no dedicated play node.
A different animation starts from its first frame, the same one set again
runs on, so a graph may choose Run or Idle every frame. The clock lives on
the entity, not in props, which the world writes back as overrides. The
AnimationSystem ticks before behaviors, and On animation finished fires
once when a Once animation reaches its end.
The Animation tab plays a preview above a frame strip: reorder by dragging,
Delete, duplicate, + Frames, pause/resume, and wheel zoom about the pointer
with pan and Fit. Scene and Container tabs show the first frame; edit mode
has no clock. Right-clicking a texture creates an animation from its frames.
Button now measures its label with the bold font it draws in, which cut
the Animation tab and red dialog buttons short.
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
Get/Set property, Get/Set properties, Set enabled and Set text are gone.
A single Properties node takes a fixed "object" input; every chosen
property is an output that reads the current value, and one switched to
Set is also an input written when the flow arrives. Exec pins only exist
while at least one entry writes.
The node carries a type (Sprite, Text, Collider, Camera, Container,
Behavior, Any) that decides what "+ Property" offers: the fields of that
type, the variables of the chosen behavior, or for Any a kind to pick
and a name to type. Each port takes the default and field of its type,
so a Camera width starts at 640. Switching the type keeps the ports and
marks those the new type lacks. At runtime the type is only an editor
aid; the node writes to whatever object it gets.
Old project files are converted on load. The type is inferred from the
keys: the first object type that has them all, else the one behavior
that declares them all, else Any. enabled belongs to every object, so a
converted Set enabled lands on Any.
The jump-run and tetris seeders use Properties throughout; draw-piece
switches its cell on in the same node that sets the colour.
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
A single node now lists any number of variables. Every entry is an output
that reads the current value whenever it is pulled; an entry switched to
Set is also an input and is written when the flow arrives. Exec pins only
exist while at least one entry writes, and all inputs are read before any
write, so one node can swap two variables.
Get/Set variable, Get/Set variables and Variable are gone. Old project
files are converted on load: each old node becomes a Variables node with
the same variables, edges and typed values.
A written port without a typed value now shows the zero of its kind on
the node body, matching what the inspector shows and what the run writes.
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
Get properties / Set properties work like their variable counterparts:
one port per chosen property, an unconnected input writes its inline
value. A port chosen from the built-in list keeps that property's field
and default (height starts at 100, color is a colour field). "object" is
reserved for the fixed input, checked by the command and on load.
The property picker names the owning type ("Sprite width"), and text
fields can now carry a suggestion list; Get/Set property use it.
Double-clicking a call node shows the path of opened behaviors under the
graph header. Clicking an entry jumps back and trims the path; choosing
a behavior any other way hides it. Reopening a behavior already on the
path steps back to it instead of repeating it. The bar shows before the
graph switches, otherwise it clips the graph that was just fitted.
The "Add node..." header button is gone; nodes come from the context menu.
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
Get/Set variable nodes now title themselves "Get <name>" / "Set <name>", and
the new Variable node just "<name>"; the title is the same folded or open,
and a collapsed node shrinks to it. The redundant "Variable: <name>" row is
gone unless the variable was deleted ("<name>?" is the only hint then).
The Variable node sets its value when an exec flow arrives and exposes the
value at any time. Its output is read when a downstream node pulls it, not
frozen at the write, so count = count + 1 is one Variable node plus an Add.
Get variable keeps reading once per pulse: switching it would change the
behaviour of existing games.
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
A list item may now be a struct. The depth is bounded in the declaration
rather than by a comment: FieldKind (number|text|boolean|color) says what a
struct field holds, ListItemKind adds struct on top and says what a list
holds, so list -> struct -> primitive is the deepest storable shape and
sameValue stays finite. A struct item renders inline in the List tab, which
is why it needs no path in the slot address.
Four paths silently assumed a list item was a primitive: sameValue compared
items with ===, textOf would have printed [object Object], asListItem turned
a struct into text on Set item and Fill, and Index of used indexOf, which is
reference equality and could never have found a struct.
Tetris now runs on bundles. shapes is 112 {x, y} structs instead of 224 loose
numbers, piece and the candidate are structs, so Next move hands back a whole
candidate and each strand packs only the field it changes, since mergeStruct
leaves the rest standing. Declared behavior ports drop 49 -> 35, the master's
variables 18 -> 13, its graph 84/94 -> 69/76 nodes/edges.
Get variables and Set variables declare their ports from a list of variable
names, the way Pack and Expand already do, so one node can read or write
several at once. Renaming a variable rewires them, because there the port key
is the variable name.
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
Ports that vary per node already existed, but only for the three nested-behavior
types, and the rule for them sat as a switch on type names in nested.ts – the
one place in the project that knew node types by name. It dissolves into two
optional contracts on NodeDef, so a type carries its own rule:
declaresPorts the node holds an editable list, shown as a section in the
inspector – behavior start/end, and now Pack/Expand
derivePorts the node computes them from its settings – Sequence from a
count, Run behavior from the behavior it names
Sequence gains an Outputs setting (2 to 26). Its keys stay a, b, c and count on
with d, e, so the edges of the sequences already out there survive.
A param can now take a port away, and the edge on it would stay: it draws as
nothing yet survives every save, and comes back to life if the port returns.
SetNodeParamCommand takes those edges with it, which also closes the same leak
that switching a Run behavior node's target has always had.
The port editor addresses its node by id rather than by type, so two Pack nodes
can live in one graph, and it calls the rows Fields when they are not a
behavior's signature.
A variable could only be a number, a text or a yes/no, so every set of values had
to be smuggled through a string - which is where Tetris got its unreadable
"03066326048763714" colours from. A list is now a value of its own, with an item
kind (number, text, yes/no, colour) that decides how the inspector reads the one
comma-separated line it is typed as, and eight nodes to work with: List, Fill,
Count, Item at, Set item, Sub list, Join lists, Index of.
Two traps came with it. An array is typeof 'object', so every place that told a
value from an entity had to learn the difference, or a list would have been
passed around as a game object. And a value was compared by identity in three
places - with lists that marks everything as an overridden property after each
reload, so those comparisons now compare contents.
There is no list of objects: a list is written to the project file and an object
is a live handle that no reload survives. A set of objects stays a list of names.
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
A behavior that has a Start and an End node can now be dropped into any
other graph as a node of its own. What is declared on the start node
becomes the inputs of that node, what hangs on the end node its outputs;
the port list is derived from the sub graph, not copied, so declaring a
port in one graph grows the node in the other without touching it. The
node carries the behavior's name and the palette lists behaviors by
name, so a call is one grab instead of a node plus a dropdown.
An embedded behavior has no object and therefore no place for
variables: every call starts on the asset defaults and communicates
only through its ports. That is the conservative direction - state can
still be added later, and shared state already has a home in a behavior
object in the scene. Node ids are unique per graph only, so each call
gets its own pulse cache; without that, two graphs would collide.
Renaming a port used to silently drop the value typed on the calling
node. It is carried along now, project wide, like the edges.
A Tetris example project needs to draw 200 board cells and scan rows
for a full line. Neither is expressible without iteration, so the node
system gets a Repeat node plus the missing text side: Substring, Find
text and To number. The interpreter drops its data cache once per
round -- otherwise every round would recompute with the first round's
values.
Object by name takes its name as an input now, not just as a setting;
addressing "c" + index is impossible otherwise. An unconnected input
reads the stored setting, so saved projects are untouched.
The board itself is a 200-character text, "." for empty. That makes
both operations of Tetris a single expression instead of a loop, and
each frame attempts exactly one move -- rotate beats sideways beats
fall -- so the fit check exists once in the whole graph.
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
Remove comments that only restate the code, keeping the section banners
and the notes that carry a reason, a measured fact or an external
contract.
ButtonOptions.width claimed to be a fixed width but only set minWidth,
so the Graph and Texture pickers grew with the name they showed. It is
now what it promises, with a separate minWidth for the buttons that have
two forms. Narrow buttons shrink their padding, otherwise a 24px icon
button had 8px left for its glyph and truncate dropped it entirely.
__gm.labelsDropped() guards that class: the overflow guard only saw text
that was too wide, never a label truncated to nothing.
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
Tooling:
- Prettier as the single formatting authority (110 columns, single quotes,
measured against the existing style); Markdown excluded because table-cell
padding turns the README glossary into 1000-character lines.
- Type-aware ESLint ending in eslint-config-prettier, so a rule always means
"this is a bug", never "this looks different".
- .editorconfig and an `npm run check` that runs typecheck, lint, format and
tests in one go.
Findings fixed on the first run: three more duplicate imports, four
String(unknown) calls (parameter types narrowed instead of casts), two dead
initialisers, two redundant casts, a console.log for a real error. Two
warnings were false here and are disabled with a reason in place.
Tests 132 -> 269:
- node-catalog.test.ts covers every node with a run(), with a guard that fails
when a new node has no row.
- behavior-events.test.ts covers the ten event nodes through a running World,
checking timing rather than existence.
- Input's state machine (press/release/releaseAll) is reachable without DOM
events now; the DOM handlers are thin adapters.
Compare fell back to == without a configured operator although the schema
default is <; aligned.
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
adminandClaude Opus 5.5