Files
feuerwerk/tools
adminandClaude Opus 5.5 b6749cc43d Show Tremolo, Vibrato, Phaser and Flanger as devices that swing (#398)
The four effects that swing were still drawn as rows of numbers. Like
the Delay, the Saturation and the Limiter, each node now shows a device
of a fixed size. Its screen draws what it does over the first seconds
of a sound, and a light plays that in real time, over and over.

- One device for all four (ModulationPanel, ModulationFace and
  modulationView), as KnobPanel is for Gain, Pitch, Mix and Pan. A short
  description gives each its title, plate, buttons and knobs.
- Tremolo, 640x280 in cream: a wave its volume shapes, the volume as
  its outline. It says DOWN TO 50%, EVERY 200 ms and DIPS -6 dB.
- Vibrato, 640x280 in plum: the pitch in semitones, cool below and warm
  above. Under a wet below 1 the dry pitch stands beside it. It says
  how late the voice is (LATE 0.93 ms).
- Phaser, 760x280 in mustard, and Flanger, 680x280 in steel blue: the
  response from 20 Hz to 20 kHz, and under it a lane of the turn or the
  delay over time. The response is drawn where the light is, so the
  notches swirl and the comb jets. A comb finer than a column fills it.
- The light loops over 1, 2, 4 or 8 s, two LFO swings at least, for a
  Flanger as long as its sweep takes to reach 20 ms. The face only
  keeps the editor drawing while something swings and is heard.
- A Rate lamp beside each name goes from dark to lit with the swing.
- Nothing is listened to. The pictures use the worklets' own numbers:
  lfoAt, vibratoSpeedUp (now exported from lfo.ts), the allpass chain
  with its feedback, and the comb, reckoned at 48 kHz.
- Phaser and Flanger take 4 preset columns. Phased Pad was looked at
  in a picture, nothing overlaps.
- Exported from nodes.ts: LFO_SHAPE, lfoShapeOf, TREMOLO_ROWS,
  VIBRATO_ROWS, PHASER_STAGE_ROW and phaserStagesOf. FLANGER_MAX_MS is
  exported from phaser.ts.

Decided here, as the request left the look open:

- A notch counts where the response falls below -3 dB, not some dB
  under the loudest point. Feedback rings peaks far above 0 dB, and the
  first rule counted 7 notches on a Phaser of 12 stages.
- Rate and Depth of Tremolo and Vibrato are big knobs, Wet is small.

Tests:
  Unit modulation-view (stein2): 22 tests, new. Phaser and Flanger
    give the dB of their worklets on a sine within 0.005 dB, the
    Tremolo its samples, the Vibrato the pitch it reads at.
  Counter-check: with the sign of the Phaser's feedback flipped in one
    place, exactly the worklet test fails.
  e2e 34 (atx): ALL PASSED, 142 checks, 4 new. Each device has its
    size, its ports outside, a light that runs by itself, and a button
    and a knob as one undo step each. Picking 8 stages on the Phaser
    draws 4 notches.
  Gate (atx): CHECK EXIT 0, 291 files, 4467 tests.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
2026-10-10 21:02:50 +02:00
..
Plugins belong to the project, and they load before it: the project file gained the field plugins: ["demo-plugin.js"] (default empty, no formatVersion bump), the Plugins tab's switch writes into it as an ordinary undo step (SetPluginActiveCommand) instead of into a server-wide plugins.json, and the start order is turned around - startPlugins only fetches the list of files, then editor.boot() runs and ProjectStore.load(id, prepare) hands the raw JSON through before it is deserialized, where pluginsOf(raw) reads the list and PluginManager.syncTo() activates exactly those; that is the point of the issue, because what a plugin registers has to stand there before normalizeGraph would throw it away as unknown (#126, #127), a project switch first stops what the new project does not name and then starts what it does, a file the server does not have is passed over silently, and after signing out the manager is dead so a late event cannot start anything in a torn-down session; on the server plugins.json, PluginStore::setActive, isActive, the route PUT ?r=plugins/{file} and the 403 for inactive modules are gone and GET ?r=plugins only answers {file,bytes,updatedAt}, which makes every plugin file fetchable - the consequence accepted in #117, written down in the wiki for #115 and #116; publishPlugins(root) only copies files now, the seeder switches the demo plugin on in the fixture project, and the Plugins tab carries a puzzle piece as its icon while only a plugin's own tab still goes without one (the knob and the socket are cubic curves, not arcs, which Pixi's parser draws as a spike after an L); 3 new e2e checks in module 38 and 5 new unit tests cover the project as the owner of the switch, its undo, the order, pluginsOf against crude input and an unknown file name (#119)
2026-09-20 14:24:27 +02:00