The orbit radius (min/max/default and per-notch step) was in absolute world
units and ignored the player's localScale, so a small Hider started too far
out and a large Hunter too close and could not zoom out far enough. Multiply
range, step and default radius by the follow target's lossyScale (PlayerScaler
keeps the body uniformly scaled), making the inspector fields size-1 design
values that frame every role body-relative. Re-clamp every frame so a runtime
grow/shrink stays in range. GameModeManager.BindLocalPlayer calls ResetZoom
after rebinding so each new avatar starts at its scaled default zoom.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
SetPaused no longer Exits the active mode, so the First-Person/Free-Cam rig
keeps its CinemachineCamera priority and the view stays frozen in place instead
of blending back to the orbit camera. Pausing now only disables each rig's
per-frame look input (dropping the controller's enabled flag) and parks the
orbit rig in Disabled to free the cursor; resuming re-enters the same mode whose
snap-to-current-view is a no-op, so there is no jump on close either.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
- Panel shows in Main while disconnected, auto-hides once a connection is
established, and toggles open/closed with Escape in the Lobby or on a Map.
- Escape now pauses gameplay (active mode exits, cursor freed, paint and
movement disabled) instead of ending the match directly; closing restores
the prior mode via SwitchTo.
- Disconnect button is context-aware: leaves the session in the Lobby, acts
as "Back to Lobby" (EndMatch) for the match authority on a Map, and stays a
plain disconnect for non-authority clients on a Map.
- Removed the Escape->EndMatch handler from MatchManager; match end now routes
through RequestEndMatch with the same authority routing.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
ReleaseToNoPlayer tore down the mode cycle but never raised ModeChanged,
so the paint HUD - which only hides via that event - stayed open after a
shutdown that happened while PaintMode was active. Invoke ModeChanged(null)
after the teardown so any mode-following UI hides.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
Mid-match joiners now spawn a dedicated empty Spectator prefab (NetworkObject
+ SpectatorSetup only) instead of a fully stripped Player prefab. The FreeCam
rig is a standalone scene object in Main, so the spectator needs no avatar body,
renderer, collider, or CharacterController -- eliminating the leftover-body
artifact and the fragile per-peer strip path entirely.
- SpectatorSetup.cs (new): owner binds GameModeManager.BindSpectator (FreeCam-only)
- Spectator.prefab (new): empty avatar (Transform + NetworkObject + SpectatorSetup),
registered in DefaultNetworkPrefabs, wired on MatchManager in Main
- GameModeManager: add BindSpectator/BuildSpectatorModes; drop the spectator
branch from BindLocalPlayer; ReleaseToNoPlayer frees the cursor on teardown
- MatchManager: independent entropy-seeded RNG for fair hunter pick (was sharing
the global engine RNG and always landing on the same client); spawn the
spectator prefab for mid-match joiners; cursor-safe return-to-Main teardown
- FreeCamController: guard IgnorePlayerCollision against a disabled capsule
Also bundled (unrelated user asset/UI edits): PaintHudPanel layout tuning,
font atlas (arialroundedmtprocyr_bold SDF), forestpack_foliage material.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
Replace the connection-approval role selection with a server-authoritative
match flow built on NGO additive scene management:
- Scenes: Main is the persistent foundation (NetworkManager, GameModeManager,
cameras, HUD); Lobby and Test Map load/unload additively. Add Lobby + Test Map
to the build settings; remove the obsolete SampleScene.
- MatchManager (plain MonoBehaviour singleton): loads Lobby on server start,
StartMatchTrigger lets the host start the match, rolls one random Hunter (rest
Hider), swaps Lobby -> Test Map (strictly serialized per NGO), respawns each
player as its role variant. Forces additive client sync mode so clients keep
Main instead of single-loading it (fixes "Destination scene is not valid").
- Server-driven spawning: null out NetworkConfig.PlayerPrefab at runtime to
disable auto-spawn, then spawn players after the lobby floor exists (fixes
falling through the floor) with double-spawn and transition guards.
- StartMatchTrigger: server-gated OnTriggerEnter, only the host's own player
starts the match.
- NetworkBootstrap: drop role selection / connection approval; everyone spawns
as the neutral Player prefab. Host/Client/Server/Shutdown buttons stay.
- NetworkPlayerSetup.ScopedModes flag (baked on Hunter/Hider prefabs): lobby
avatar gets the full mode set, match variants get the role-scoped set.
- GameModeManager.BindLocalPlayer reads ScopedModes and rebinds the painter
unconditionally (fixes stale painter binding on respawn -> brush painting in
every mode).
- MeshPainter.PaintingEnabled defaults to false (unbound/pre-spawn/remote never
paints); PaintHud visibility now also gates on a bound painter (fixes the HUD
showing at startup before any avatar exists).
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
Roles are chosen in the bootstrap dev panel before Host/Client. NGO
ConnectionApproval is enabled at runtime and maps the role payload to
the matching prefab variant per connection (Hunter/Hider), so each peer
spawns the correct avatar including the host.
- PlayerRole.cs (new): single source of truth enum { Hider, Hunter }.
- NetworkBootstrap.cs: role toggle, ConnectionApproval + role payload,
server ApprovalCheck mapping role -> PrefabIdHash.
- NetworkPlayerSetup.cs: serialized PlayerRole field + Role property.
- GameModeManager.cs: BuildModes(role) - Hunter -> [First Person, Paint],
Hider -> [Third Person, Paint, Free Cam]; binds role from spawned avatar.
- Hunter.prefab: role = Hunter override.
- SampleScene.unity: NetworkBootstrap prefab references wired.
Also includes user inspector scale tuning (Hunter 2.5->2.4, Hider 0.5->0.7).
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
Point the first-person camera at the dedicated FirstPersonTarget anchor
(eye height) instead of the shared CameraTarget, in both the runtime
SetPlayer rebind and the editor ResolveReferences fallback.
Rebind the paint HUD to the locally spawned avatar's MeshPainter via a
new GameModeManager.PainterChanged event. Since the spawn-on-connect
refactor, no player exists at PaintHud.Start(), so the HUD bound to a
null painter (no brush masks shown, color/settings were no-ops).
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
Install Netcode for GameObjects 2.13.0 + Unity Transport 2.6.0 and wire up
the first networking milestone: syncing player position/rotation across clients.
- NetworkBootstrap: Host/Client/Server controls (OnGUI + H/C hotkeys) for
local clone testing over loopback 127.0.0.1:7777.
- NetworkPlayerSetup: per-avatar owner gating. The local owner binds the
GameModeManager and cameras to itself; remote avatars disable their
controller/CharacterController and receive transform via NetworkTransform.
- GameModeManager.BindLocalPlayer: central runtime rebind to the locally
spawned player.
- FirstPersonController.SetPlayer: explicit runtime rebind hook.
- Player prefab: NetworkObject + NetworkTransform (owner-authoritative,
position + rotation) + NetworkPlayerSetup; registered as PlayerPrefab.
- Scene: NetworkManager + UnityTransport added; the fixed scene player
instance removed in favor of spawn-on-connect.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
Introduce a FirstPersonController / FirstPersonMode pair (mirroring the
free-cam mode) wired into the GameModeManager Tab cycle. In first person the
mesh is hidden, the eye sits on CameraTarget plus a per-pose
firstPersonCameraTargetYOffset, and the character body yaw is driven to match
the camera via a new single-writer FaceYaw hook on PlayerCharacterController.
Also includes user content edits (poses, prefabs, scene) carried along.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
Introduce a free-fly camera as the next entry in the Tab mode cycle
(Player Control -> Paint -> Free Cam):
- FreeCamController: dedicated CinemachineCamera plus a CharacterController
mirroring the player capsule (radius 0.1, height 1.3, slope 59, step 0.15)
so the free camera collides with walls/ceiling/floor exactly like the
player. WASD/Q-E (and Space/Ctrl) fly relative to view; mouse looks.
- FreeCamMode: plain-C# GameMode mirroring PaintMode, with an Exit() that
restores camera priority and re-enables player control + camera input.
- GameModeManager: register freeCam in the Tab cycle (gated like player).
- Scene: FreeCamera object wired, Main Camera custom blends (0.4s) for the
vcam priority hand-off.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
- ConcealmentMeter: standalone component measuring the percentage of the
character volume embedded inside environment geometry (bake -> voxelize via
column ray-stabbing parity -> classify interior voxels against box/sphere/
capsule/convex colliders and terrain). Always-on, throttled, gizmo debug.
- SkinnedColliderBaker: sole per-frame collider bake owner for skinned rigs.
MeshPainter now delegates baking and only borrows BakedMesh for the GPU
raster and cache refresh, so the collider stays fresh outside paint mode.
- Move pose assets to Assets/Poses, retire unused Insect scripts to
Assets/Unused, restore Paintman.controller; mode scripts and scene updated.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
Add a code-driven HUD that appears in paint mode and binds live to the
active MeshPainter: four channel toggles, HSV pickers for albedo and
emission, sliders for metallic/smoothness/occlusion, emission intensity
and brush size. The HUD self-assembles its own overlay canvas and event
system at runtime.
Add a ModeChanged event to GameModeManager so the HUD can follow the
active mode, and guard MeshPainter against painting through the UI.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
Add InsectController (transform-driven SphereCast surface following, no
CharacterController/Rigidbody, no gravity or slope limit) and InsectMode as a
third game mode. Wire it into GameModeManager with conditional registration so
PlayerControl and Insect modes only join the Tab cycle when their controller is
present. PaintMode/PlayerControlMode toggle the insect controller accordingly.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
Reduce comments to non-obvious "why" notes and convert UnityEngine.Object
null checks to implicit bool (if (obj) / if (!obj)). Input System devices
(Mouse.current, Keyboard.current) and plain arrays keep explicit != null.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
Introduce an extensible game mode system toggled with Tab:
- Player Control: WASD movement with always-on mouse camera orbit
- Paint: player frozen, left-click paints, right-click holds to orbit
Add GameMode base class, GameModeManager, and the two concrete modes.
Refactor controlled scripts to expose clean state flags instead of
handling input themselves: ThirdPersonOrbitInput.LookMode,
PlayerCharacterController.ControlEnabled, MeshPainter.PaintingEnabled.
Also fix camera zoom: remove the obsolete /120 wheel normalization so
one scroll notch maps to one zoomSpeed step under the new Input System.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
adminandClaude Opus 4.8