New PlayerPose ScriptableObject (AnimationClip + ceiling Y-offset) and
PlayerPoseController that drives poses via a PlayableGraph, overriding the
Animator controller. Poses are held continuously (idle, moving, on wall/
ceiling) so cycle and sprint changes show immediately. Sprinting in any
state resets to pose 0. Non-keyed bones fall back to a captured rest pose
so empty/partial clips apply fully. Ceiling Y-offset is folded into the
controller's single mesh-offset writer.
PlayerCharacterController gains IsIdle / IsSprinting / IsOnCeiling /
AnimatorOverridden accessors and SetPoseLocalYOffset; SetAnimatorRunning is
guarded while a pose owns the Animator. Removed obsolete Paintman.controller.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
PlayerCharacterController:
- Wall lean now moves only the visual model + its paint collider (auto-resolved
mesh root parenting both renderer and bones), not the CharacterController
capsule, so the mesh can sink into the wall (wallMaxInset) as well as lean out
(wallMaxOffset); capsule stays flush.
- Lean eases back to the authored pose when leaving the wall instead of snapping.
- Sprint multiplier now also applies while wall/ceiling climbing.
- Separate wallMantleSpeedMultiplier for pulling up over the top edge,
independent of the climb speed.
Assets:
- Re-exported paintman_UV.FBX and added Paintman.blend: rescaled armature to
mesh, merged seam duplicate vertices, fresh automatic weights, inner-thigh
weight fix (no webbing on leg spread).
- Updated anims, animator controller, font SDF and scene.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
Add player position/rotation/wall-climb persistence and camera
orbit (yaw/pitch/radius) persistence, auto-saved on quit/play-stop
and auto-loaded on start. Also includes the wall-climb fixes
(directional top-out, base detach on push-away).
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
Replace the CPU island-mask dilation guard on the GPU backend with a
coverage pass rendered through the same brush rasterizer, so sub-pixel
rim texels that the GPU brush can never reach fall into the gutter and
stay paintable (no more frozen loaded pixels at island edges).
Also includes user content: additional brush masks (dirt) with an
expanded mask selector in the HUD prefab, and CharacterController /
wall-climb inspector tuning.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
- Add mask selector with previews to the brush card (data-driven from
painter.brushMasks); persist activeBrushIndex with HUD layout.
- Fix alpha/coverage artifacts when overpainting after load or backend
switch: derive the dilation source marker from a deterministic UV island
mask instead of resetting it to "unpainted" on every seed.
- Import the two final brush mask textures (Brushes/).
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
- PlayerCharacterController: latch the wall-strafe sign once at strafe
start instead of re-deriving it from the camera every frame, which
flipped at the 90-degree point while circling a cylinder and caused a
back-and-forth lock. Flat walls stay bit-identical; reset on enter/exit.
- MeshPainter.Pick: dispatch terrain hits to a splat-layer blend (full
PBR channels), terrain trees / grass / sky to rendered screen-color,
keeping texel-accurate picks for the paint mesh and foreign materials.
- Includes Unity auto-reserialization of SampleScene and three Supercyan
pack assets (URP material upgrades, skybox/lighting) from the import.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
Reset the pipette toggle after a successful pick so each pick is a
one-shot action (HUD toggle follows via the Picked sync). Split the
wall-climb pose drag so the lean-out offset stays on LMB while body
rotation moves to RMB, letting both be held independently. Also pulls in
the terrain physics module and the user's scene setup for the terrain
test area.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
The pipette now raycasts the nearest collider of any object, not just the
paint mesh. On a foreign hit it reads all channels texel-accurately from the
object's material maps (BaseMap/MetallicGloss/Occlusion/Emission) combined
with the material scalars per URP/Lit conventions, falling back to scalar
properties where a map is missing or the collider yields no UV. Includes
scene test props and materials for verifying foreign-object picking.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
Spray brush mode: bakes a procedural scattered-dot mask per stamp (random
position, size, alpha within the brush disc) and paints it through the
existing single-stamp pipeline; dot centers clamped to (0.5 - dotR) so the
spray footprint matches the solid brush radius.
Paint interval: float on MeshPainter; 0 keeps the continuous interpolated
stroke, >0 emits a single timed dab every x.xx seconds.
Color picker alpha: horizontal alpha bar on both HSV pickers, runtime-built
in Rebind (no prefab re-bake), passed through to brushColor.a / emissionColor.a.
Metallic/smoothness + occlusion paint opacity: new opacity fields applied in
both CPU and GPU backends (GPU MSO draw split into MS and occlusion sub-stamps
for independent opacity), with cloned alpha sliders wired into the HUD.
Also includes the prefab layout tweaks and scene adjustments.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
Assign the baked PaintHudPanel prefab to the scene PaintHud, lower the
emission intensity and brush size defaults, and adjust camera and hand
rest positions.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
Add the new Player (Variant 2, Hand) with HandIK and the InsectController,
boot directly into Insect mode, and apply Unity-managed serialization updates
to the physics, renderer, and post-process settings assets.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
Adds the HandIK component to Player/WhiteHand with handRoot wired to the
Hand node so the finger IK system is active in the scene.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
- Make wall-climb controls wall-relative: W approaches/climbs up,
S moves away and detaches, A/D strafe along the wall
- Add slow approach speed for moving toward/away from the wall
- Remove wall-climb activation time (activate on contact)
- Add mantle/top-out over the top edge so the player pulls onto the
surface instead of dropping and re-grabbing (fixes edge flicker)
- Add re-grab cooldown after top-out
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
Introduce an extensible game mode system toggled with Tab:
- Player Control: WASD movement with always-on mouse camera orbit
- Paint: player frozen, left-click paints, right-click holds to orbit
Add GameMode base class, GameModeManager, and the two concrete modes.
Refactor controlled scripts to expose clean state flags instead of
handling input themselves: ThirdPersonOrbitInput.LookMode,
PlayerCharacterController.ControlEnabled, MeshPainter.PaintingEnabled.
Also fix camera zoom: remove the obsolete /120 wheel normalization so
one scroll notch maps to one zoomSpeed step under the new Input System.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
- Install Cinemachine 3.1.7 and set up an orbital third-person camera rig
(CinemachineBrain, OrbitalFollow, RotationComposer, Deoccluder).
- Add ThirdPersonOrbitInput: mouse-driven orbit and wheel zoom with a Tab
toggle that unlocks the cursor and pauses rotation.
- Fix MeshPainter so the paint ray skips the player's CharacterController
capsule (and any other collider) and always targets the mesh collider,
so painting works from every camera angle.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
- Add PlayerCharacterController script: CharacterController-based
movement (camera-relative WASD), jump, gravity, rotate-toward-movement
and slope sliding so the player slides off surfaces/edges steeper than
the slope limit instead of balancing on them.
- Update SampleScene: add Player (with CharacterController), ground plane
and obstacle cubes; parent the paintable paintman_UV under the Player.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
Unity 6000.3 (URP) project with live mesh painting in play mode.
- MeshPainter.cs: paint a SkinnedMesh with the mouse, seamless across
UV islands via 3D-space painting, GPU and CPU backends (switchable),
edge-padding/dilation against bilinear seam bleed
- FrameRateLimiter.cs: simple frame rate limiting component
- MeshPaintBrush / MeshPaintDilate shaders for the GPU paint path
- Unity-specific .gitignore and .gitattributes
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
adminandClaude Opus 4.8