Load scene sets a flag on the World like Stop and Restart do; the swap
happens after the tick, and the last wish of a tick wins. Exactly one
thing crosses over: the SharedState, so global variables and global
machines keep what they know while everything local is built anew.
Loading the scene that is already running rebuilds it, which is what
"reset the level" means when the score must survive.
A run starts either from the start scene (a new project field, set from
the asset panel and marked with an arrow in the list) or from whatever
scene is open. The toggle next to Play says which question is asked and
remembers the answer in localStorage: it is a way of working, not part
of the game.
Sounds no longer end because a scene ends. A voice belongs to the
behavior that started it and stops right after On destroy, so the scene
swap is no longer a special case at all. For the enemy that plays its
explosion and destroys itself in the same breath there is now a
detached input on Play sound.
The scene selector stays usable while a run plays, because a double
click in the asset panel already did the same thing unguarded. It moves
what the editor looks at, not what the run plays.
Sounds follow the road fonts already paved: the file goes to the server
content-addressed under its sha256, the project keeps a named asset that
points at it, and nothing is ever re-encoded. The format is read from the
file's own signature, not from what the browser claims - the same .m4a
arrives as audio/mp4, audio/x-m4a or as nothing at all.
Playing is two nodes. "Play sound" takes the asset and may raise or lower
its volume; every call is its own voice, so two jumps in a row are two
jumps heard. Its loop input is a choice of three - from the asset, on,
off - because a checkbox has to spend one of its two positions on "not
set" and would lose a case: an asset that loops could then never be
played once.
Below the graph core stays browser-free: NodeContext hands out an asset
id, BehaviorSystem resolves it against the project and folds the asset's
own volume and loop into the call, and only viewport/SoundLibrary knows
about Web Audio. A run without a sink plays nothing instead of throwing.
The CI browser is muted, so the ear is no witness: the debug hook counts
started and stopped voices, and step 34 reads that counter.
A state machine is an asset whose graph holds one `State` node per state
(no ports, name as title), edited in a new "State machine" tab that reuses
the graph canvas: right-click places "State n", snap toggle shared with the
Behavior tab via SnapToggle. `statemachine` is a value kind like texture
(port, literal node, variable, struct field, tagged list item).
Behaviors use it through `State branch` (one exec output per state) and
`Set state` (one exec input per state; the interpreter now hands `run` the
entry port). States live per behavior instance in NodeContext.states, with
no initial state. Ports derive from the inline picker or a wired
`State machine` literal; BehaviorLookup became GraphLookup with
behavior(id) and machine(id).
The Graph tab is labelled "Behavior" (key unchanged). Unit tests
(state-machine, kinds, catalog, ports), e2e step 26 and README added.
Co-Authored-By: Claude Fable 5.1 <noreply@anthropic.com>
- applyCommands sit on ObjectEditCommand with a revert hook instead of
five copies of the same preamble and undo
- actionIf replaces six identical Reset/Apply menu blocks, addNameField
the three name rows, assetLink the two asset links
- requireStructuralObject replaces ten two-line preambles and drops the
duplicate holder lookup
- __gm.objectsOf had no caller; the SMB remnant in e2e.sh is gone
Proven: check.sh 797 tests, full e2e 633 checks, smokes 24/19/20 against
the same bundle.
Co-Authored-By: Claude Fable 5.1 <noreply@anthropic.com>
- `.gitignore` said `index.html` unanchored, which also caught the Vite source page;
a fresh clone could neither `dev` nor `build`. Anchored to `/index.html`, page added.
- Removed GM_REMOTE (tools/remote/gm-browser.ps1 and the ssh/scp branch in browser.mjs):
the Windows test machine is gone and the only flaky check that lived on it is closed (#37).
- Removed `npm run preview`, undocumented and unused.
- Comments: wrong number in collider.test.ts (250 → 200), the "declarations used to…"
history in listItems.ts and friends, the 24 px/28 contradiction, section banners in
nodes/index.ts, node-catalog.test.ts and api/index.php, name paraphrases, and the stale
step numbers in tools/e2e/11-…23- from the old global count.
- README: asset types include `animation`, kind order Number/Text/Boolean, tagged colour
and texture items, 6/5 kinds, the `Texture` node, `./build.sh`, PROJECT_FORMAT_VERSION,
and the file tree (kinds.ts, listItems.ts, propertyPorts.ts, Breadcrumb.ts, beads.ts,
tools/assets/).
- tests/helpers.ts takes the duplicated `findObject` and `sceneWithCamera`.
Proof: ./check.sh 797 tests, full e2e ALL PASSED 633 checks against this bundle.
Co-Authored-By: Claude Fable 5.1 <noreply@anthropic.com>
A kind like colour or texture used to be spelled out in five parallel
lists, its port type, its empty value, its glyph, its label and its list
tag - 22 literal places for texture alone. core/properties/kinds.ts now
holds one row per kind and the rest is derived from it, so adding a kind
is one row. The five literal nodes collapse into literals.ts, the six
kind menus into one helper.
Number, Text, Boolean is now the one order everywhere; the variable and
port menus used to list Boolean before Text.
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
- `Texture` and `Color` can be picked as a variable kind, a struct field
kind and a declared port kind; a new `Texture` node hands a picture id
into the graph. Declared, a texture is its bare id – the `$texture` tag
stays a list-only thing.
- The `String` node is labelled "Text" like its kind; the type id stays.
- Whole-number inputs (`Item at`, `Set item`, `Sub list`, `Fill`,
`Repeat`, `Substring`, `To text`) show no decimals (`int()` in shared.ts).
- All server projects are reseeded, so `legacyNodes.ts`,
`migrateDeclaredLists` and the `ownerId` fallback go, with their tests.
- Note `reseed-because-of-list` moved to done/; new note `refactor-types`.
Co-Authored-By: Claude Fable 5.1 <noreply@anthropic.com>
A list no longer says what its items are. ListDef.items, ListDef.fields,
ListFieldDef.items and SetListItemsCommand are gone; the single seam is
src/core/properties/listItems.ts. JSON already tells number, text, boolean
and struct apart, so only two kinds need a tag: {"$color": n} and the new
{"$texture": id}. Field names cannot start with "$", so a tag never
collides with a struct field. On a data link a texture item arrives as
its bare id; the graph has no images.
List tab: the mark in front of each row is the kind picker, "+ Item"
asks for the kind, both are ordinary value edits (one undo step). A list
inside a struct field only offers the flat kinds because the depth rule
forbids a struct item there (ListAccess.kinds); the menu used to offer
it and silently do nothing.
Legacy lists that declared items: 'color' are tagged on load.
Actor demo: the four walk animations and four standing frames live in
two list variables of texture items indexed by facing (Item at), so the
graph can be rebuilt in the editor. The stand frames get their grid ids
back; 44 nodes instead of 46.
Also: the user's edits to on-start-during-play.md and the new note
reseed-because-of-list.md.
Verified: check.sh 794 tests, full e2e 631 checks, smokes 24/19/20.
Co-Authored-By: Claude Fable 5.1 <noreply@anthropic.com>
Get/Set property, Get/Set properties, Set enabled and Set text are gone.
A single Properties node takes a fixed "object" input; every chosen
property is an output that reads the current value, and one switched to
Set is also an input written when the flow arrives. Exec pins only exist
while at least one entry writes.
The node carries a type (Sprite, Text, Collider, Camera, Container,
Behavior, Any) that decides what "+ Property" offers: the fields of that
type, the variables of the chosen behavior, or for Any a kind to pick
and a name to type. Each port takes the default and field of its type,
so a Camera width starts at 640. Switching the type keeps the ports and
marks those the new type lacks. At runtime the type is only an editor
aid; the node writes to whatever object it gets.
Old project files are converted on load. The type is inferred from the
keys: the first object type that has them all, else the one behavior
that declares them all, else Any. enabled belongs to every object, so a
converted Set enabled lands on Any.
The jump-run and tetris seeders use Properties throughout; draw-piece
switches its cell on in the same node that sets the colour.
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
Get properties / Set properties work like their variable counterparts:
one port per chosen property, an unconnected input writes its inline
value. A port chosen from the built-in list keeps that property's field
and default (height starts at 100, color is a colour field). "object" is
reserved for the fixed input, checked by the command and on load.
The property picker names the owning type ("Sprite width"), and text
fields can now carry a suggestion list; Get/Set property use it.
Double-clicking a call node shows the path of opened behaviors under the
graph header. Clicking an entry jumps back and trims the path; choosing
a behavior any other way hides it. Reopening a behavior already on the
path steps back to it instead of repeating it. The bar shows before the
graph switches, otherwise it clips the graph that was just fitted.
The "Add node..." header button is gone; nodes come from the context menu.
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
Split GraphCanvas (1076 -> 831 lines) into EdgeLayer and graphMenus;
the port and marker menus were the same list and are now one function.
Value specs of the inspector and the list tab share valueSpecs.ts, and
the remaining copies (compound commands, type glyphs, typed asset
lookup, name rule, play/editor world setup, marquee) are merged.
Four copies had already drifted apart; merging them fixes:
- "Disconnect N links" in the port menu is one undo step, not N
- "+ Add collider" is hidden on a placed container instance, as in
the hierarchy menu, instead of always failing
- a bool property coerced from the text "false" becomes false
- a port command on an unknown node type reports instead of crashing
Comment-only edits leave the bundle byte-identical. README corrected in
35 places (step limit, jump-run clock, suite duration, 409 body, ...).
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
buildStructBlock only covered structs, so a placed instance drew numbers,
text, bools and lists through createFieldRow on a 64 px name column while
its struct block sat on the asset's grid below it. variableRows.ts now
builds the row for every variable kind on both sides; the edit option
decides what the owner may change (asset: rename, x, item kind; instance:
revert and push). Label and Button take a fixed width so the mark column
no longer shifts names when a list shows its item-kind picker.
The two structFields calls that became dead with 9f48257 are gone. The
e2e steps locate the Enabled toggle through __gm.inspectorField instead
of clicking a fixed offset from its label.
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
The instance inspector drew its own, flatter version of a struct: one row per
field, no bundle head. It now draws the same block as the asset side, because
there is only one implementation left - both call buildStructBlock. What the
instance does not get is everything that touches the shape: renaming a field,
'+ Field', and the per-field '×'. The shape belongs to the asset; a placed
object overrides values. The revert and override marks sit on the head rather
than on a field, since an override covers the whole bundle at once.
Underneath this, editing a single field of an unoverridden struct used to blank
its siblings: structFieldsOf filled the untouched fields from spec.read, which
is object.overrides[key] and therefore undefined until something is overridden.
structOf then handed back the empty shape. PreviewedValue carries 'current' now
- the resolved value the row actually shows - and the fields come from that.
Without it the old path stays, which is right for the asset side, whose prop
bag is dense.
An unconnected list input is a button into the List tab instead of a number
field; a struct field can hold a list, so ListSlot carries an optional field
name and the three owner cases only say what sits at a key; and a list
variable picks its item kind in the inspector (marker doubles as the chooser),
so a list of structs no longer has to be born from a project file.
The declaration keeps the storable shapes finite: a struct field may be a list,
but that list holds primitives only, so list->struct->primitive and
struct->list->primitive are the two deepest forms.
check 674, e2e 483, jump-run 24, Tetris 19.
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
A list item may now be a struct. The depth is bounded in the declaration
rather than by a comment: FieldKind (number|text|boolean|color) says what a
struct field holds, ListItemKind adds struct on top and says what a list
holds, so list -> struct -> primitive is the deepest storable shape and
sameValue stays finite. A struct item renders inline in the List tab, which
is why it needs no path in the slot address.
Four paths silently assumed a list item was a primitive: sameValue compared
items with ===, textOf would have printed [object Object], asListItem turned
a struct into text on Set item and Fill, and Index of used indexOf, which is
reference equality and could never have found a struct.
Tetris now runs on bundles. shapes is 112 {x, y} structs instead of 224 loose
numbers, piece and the candidate are structs, so Next move hands back a whole
candidate and each strand packs only the field it changes, since mergeStruct
leaves the rest standing. Declared behavior ports drop 49 -> 35, the master's
variables 18 -> 13, its graph 84/94 -> 69/76 nodes/edges.
Get variables and Set variables declare their ports from a list of variable
names, the way Pack and Expand already do, so one node can read or write
several at once. Renaming a variable rewires them, because there the port key
is the variable name.
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
The value type was already there: StructValue, textOf, sameValue,
writeTyped/mergeStruct and the struct port type came with the first
part, and Get/Set variable carry any-ports, so a bundle already flowed
through the graph unchanged. What was missing was the declaration.
PropertyDef gains kind 'struct' with a list of fields, VARIABLE_KINDS a
fifth kind, variableDef a fifth parameter. A declared field is a
primitive - a list field would need a nested editor and therefore the
path in the slot address, the same step "a list of structs" is waiting
for. coerceValue now returns PropertyValue rather than FieldValue, the
first value type that is not a field; none of its five callers break.
In the inspector a struct variable is a block, not a tab. The list tab
exists because hundreds of rows fit in no inspector row; a struct is the
opposite case - few fields that fit under each other. It is the port
editor Pack already has, one level down and with a value column: type,
key and default value in one place. A placed object sees the same fields
as plain value rows: overriding yes, declaring no.
Adding or removing a field touches the declaration, the default, the
behavior's value and every instance override in one command, so a stored
value can never keep a shape its declaration no longer promises. The row
handlers read the bundle at the moment of the change rather than closing
over a snapshot - a field writes the whole bundle, so with a snapshot
the second edited row revives the first one's old value. defSignature
carries the fields, otherwise a new row appears only at the next
rebuild.
Fixes a fixture fault this uncovered: step 10 pushed its text object
into the scene without instanceEdits, which overrideSites walks with
Object.entries. AddStructFieldCommand is the first caller to reach it
from that state; the step was green alone and failed three checks in the
full suite.
Moves the dynamic-ports note to done - all three of its parts are built.
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
A short list opened after a long one drew all its rows stacked on one
point. The fault was not in the list tab: rebuild() handed the row stack
to setContent() while it was still empty, so the content was sized to
max(rows, viewport) = the viewport. The rows arrived after that, and for
a short list the same formula yields the same height, so resize() saw no
change and skipped layout(). A long list changes the height and never
showed it.
relayoutContent() now runs whenever the content changed, rather than
leaning on resize()'s change detection - that detection is the wrong
instrument for "the children moved".
The list tab was the only affected caller: the panels use ListView,
which positions its rows itself, and the inspector fills its body
before setContent.
Also drops the comma line under the list. Every section that can carry a
list supplies openList, so the comma fallback in fieldFactory was
unreachable; listToText/listFromText go with it. The list-value test now
covers coerceListItem through coerceValue instead, so the boolean
spelling stays guarded.
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
A list property in the inspector was a single text field holding a comma
separated line -- unreadable past a handful of items, and it could not
carry anything but text. It becomes a button ("3 items") that opens a
sixth centre tab, where every item is a row built by the very widget the
inspector would build for that item kind.
The renderer was free: a PropertyDef of kind 'list' already carries
`items`, so item i becomes a synthetic def of that kind -- number, text,
boolean and colour rows appear without a new branch.
The way into the tab goes through the state (EditorState.listSlot,
openList(), event 'list'), like every other tab switch here; a tab may
not call showTab itself. ListSlot lives next to Selection rather than in
the tab folder, or state.ts would have to import upwards.
A row's handlers must not close over a snapshot of the list: they outlive
a commit, since the tab only rebuilds when the length changes, and the
second edited row would otherwise revive the value the first replaced.
showTab switched five `visible` lines by hand, where a sixth tab is
silently forgotten; it is a Record<CentreTab, Widget> now.
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
PropertyValue was number | string | boolean | list. A struct joins it, which
costs two things the typechecker found rather than I did.
An object on a data edge used to mean a live entity, so asEntity would have
taken a struct for one and asString would have read .name off it. EntityHandle
now carries a symbol brand – a symbol so no field name can impersonate it, and
it never serializes, which suits a thing that exists only while the game runs.
It is built in exactly one place.
String(value) would have written a struct as [object Object] at 39 call sites.
They go through textOf(), which is identical for primitives.
normalizeGraph dropped everything but primitives from node params, so the List
node lost its value on every save ([3,1,4] round-tripped to undefined).
Variables were spared: they have a schema, params have none.
A variable could only be a number, a text or a yes/no, so every set of values had
to be smuggled through a string - which is where Tetris got its unreadable
"03066326048763714" colours from. A list is now a value of its own, with an item
kind (number, text, yes/no, colour) that decides how the inspector reads the one
comma-separated line it is typed as, and eight nodes to work with: List, Fill,
Count, Item at, Set item, Sub list, Join lists, Index of.
Two traps came with it. An array is typeof 'object', so every place that told a
value from an entity had to learn the difference, or a list would have been
passed around as a game object. And a value was compared by identity in three
places - with lists that marks everything as an overridden property after each
reload, so those comparisons now compare contents.
There is no list of objects: a list is written to the project file and an object
is a live handle that no reload survives. A set of objects stays a list of names.
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
An inspector label whose value deviates from its base was drawn bold, which is
easy to miss next to the regular labels and says nothing in the hierarchy, where
a folded subtree could hide a change entirely.
The colour now lives as a theme token (`override`, #f2c84b) used by both the
inspector labels and the hierarchy rows. Whether a row deviates is decided by
`src/core/properties/deviation.ts`: `objectDeviates` compares an object against
what it follows -- the container template for content, the asset otherwise --
and `deviationMarks` carries the mark up to every ancestor, so a folded subtree
still shows that something inside was changed.
`deviationMarks` takes the stored holder, not the resolved one: in the resolved
view container content looks like an ordinary object and `instanceTargetOf`
would compare against the asset, marking every instance.
Covered by 3 unit tests and 5 e2e checks, including one that strips an object's
own overrides to prove the row stays gold for a deviating child and restores
them byte for byte. Full suite remote on the RTX 4070: 275 checks, all passed.
The aspect button now carries two offers, so it becomes a menu: fit one
side to the texture ratio, or set both sides to the exact pixel size as a
single undo step.
Dropping a row on the outer quarter of another row inserts it into that
gap instead of parenting into it, reordering among the siblings there.
Order is the stored order, so ReorderObjectCommand is a splice; equal z
falls back to tree order, which makes this the way to draw one object in
front of another. Rejected on container content like the other structural
edits.
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
Add ↔ next to Width and ↕ next to Height in the inspector. Each sets its
field so the sprite matches the ratio of its assigned texture or frame,
reading the frame's own rect rather than the sheet's.
The buttons reuse the existing FieldActions convention, so they simply
do not appear when no texture is assigned, when the sprite is already
proportional, or on assets whose schema has no texture property.
Comparison is a cross product with a relative tolerance: 3135 of the
40000 size pairs up to 200x200 do not survive a round trip through a
division, so an exact check would leave the button standing after its
own click.
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
Remove comments that only restate the code, keeping the section banners
and the notes that carry a reason, a measured fact or an external
contract.
ButtonOptions.width claimed to be a fixed width but only set minWidth,
so the Graph and Texture pickers grew with the name they showed. It is
now what it promises, with a separate minWidth for the buttons that have
two forms. Narrow buttons shrink their padding, otherwise a 24px icon
button had 8px left for its glyph and truncate dropped it entirely.
__gm.labelsDropped() guards that class: the overflow guard only saw text
that was too wide, never a label truncated to nothing.
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
- NumberField takes a decimals option (default 3); frame rects and the
slice dialog use 0, matching their integer model.
- Button truncates its label to the drawn width; Dropdown reserves the
chevron slot. NodeView reuses the shared truncate().
- Setting scaleMode leaves the style's shared resource id in place, so
the old GPU sampler stayed in use until a reload. Call style.update().
- Graph gets a header bar like the Texture tab: GraphEditor is now the
frame, the former editor is GraphCanvas. A selection the tab does not
concern no longer unloads the behavior.
- New e2e step 14 guards text overflow across all widgets.
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
A new Texture tab next to Scene/Game/Graph shows a texture sheet and lets
frames be drawn on it: drag to create, move, resize via eight handles, edit
name and rect in the inspector, Delete to remove. Every change is a command,
so one gesture is one undo step. "Slice..." cuts a grid from columns and rows
with optional offset and spacing, previewing the resulting frame count and
cell size live.
Sprites pick a frame instead of the whole texture through the same `texture`
property: it now holds either a texture id or a frame id. Frame ids come from
the same generator and are document-wide unique, so one picker, one property
and one set of instance overrides cover both cases, and every sprite written
before this still means the same thing.
A Graphics fill ignores a Pixi sub-texture's frame and draws the whole image,
because it derives its uvs from the shape bounds and the inverted style
matrix. The cutout is therefore a matrix (`viewport/textureFill.ts`), which
keeps a sheet at a single GPU upload no matter how many of its frames are on
screen at once.
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
Images are uploaded to a content-addressed blob endpoint and stored as
data/textures/<sha256>.<ext>; the project only keeps the file name. The
sprite points at a texture asset through an ordinary property of the new
kind `asset`, so instance overrides, "Apply to container", "Reset to
asset", undo and `Set property` work without any extra code. The new kind
also replaces the ad-hoc asset picker the graph nodes faked as an enum.
Import goes through + -> Texture, drag & drop onto the canvas or Ctrl+V.
Images wider than 2048px are downscaled client-side and re-encoded to
WebP if needed, because nginx caps uploads at 1MB; an image that already
fits is uploaded byte for byte so pixel art is never resampled.
The sprite colour default changes from red to white, since colour tints
the texture multiplicatively and a tint of white shows an image as it is.
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
Menu entries are left-aligned and live in a ScrollContainer capped at 320 px, so a
long list (the parent picker holds every object of the scene) scrolls instead of
running off the screen. `Menu(items, { searchable: true })` puts a filter box above
the scroll area; Enter takes the first match. Filtering forces a relayout because
two queries with the same hit count leave the height unchanged, which would keep
the stale row positions.
Fields that open a menu are a new `Dropdown` widget: the value sits flush left and
the chevron is drawn flush right instead of being written into the label. A menu
opened below a field is never narrower than that field.
New debug hooks `overlayTexts()` / `overlayRect()` make the popup contents
assertable; e2e step 11 covers the cap, the scrolling and the search box.
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
Tooling:
- Prettier as the single formatting authority (110 columns, single quotes,
measured against the existing style); Markdown excluded because table-cell
padding turns the README glossary into 1000-character lines.
- Type-aware ESLint ending in eslint-config-prettier, so a rule always means
"this is a bug", never "this looks different".
- .editorconfig and an `npm run check` that runs typecheck, lint, format and
tests in one go.
Findings fixed on the first run: three more duplicate imports, four
String(unknown) calls (parameter types narrowed instead of casts), two dead
initialisers, two redundant casts, a console.log for a real error. Two
warnings were false here and are disabled with a reason in place.
Tests 132 -> 269:
- node-catalog.test.ts covers every node with a run(), with a guard that fails
when a new node has no row.
- behavior-events.test.ts covers the ten event nodes through a running World,
checking timing rather than existence.
- Input's state machine (press/release/releaseAll) is reachable without DOM
events now; the DOM handlers are thin adapters.
Compare fell back to == without a configured operator although the schema
default is <; aligned.
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
- Inspector rows compute their reset/apply entries through providers, so an
entry that would not change anything is dropped; a single remaining entry
renders as a direct button instead of a menu, none removes it entirely.
- Bold and buttons now follow the same rule (deviatesFromAsset /
deviatesFromTemplate in core/properties/resolve.ts).
- Hierarchy panel is a collapsible tree: chevrons, arrow keys, double click,
expand/collapse all. Everything starts collapsed; selecting an object
expands its ancestors and scrolls it into view.
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
- Position is now { x, y, z }; higher z draws on top, ties keep hierarchy order
- Viewport sorts the objects layer deterministically (syncDrawOrder)
- Inspector shows a Z field; asset properties that differ from the schema
default are marked bold with a reset button (ResetAssetPropertyCommand)
- isModified() helper, unit tests, E2E checks and seed updated
Co-Authored-By: Claude Fable 5.1 <noreply@anthropic.com>
Canvas-only 2D game editor/runtime built on PixiJS v8 + Vite + TypeScript.
- core: asset model (Scene/Camera/Sprite), scene objects with sparse
overrides, property schema + resolve, command stack (undo/redo),
serialization and project store interface (16 unit tests)
- ui: custom in-canvas widget toolkit (panels, fields, color picker,
list/scroll, popup) with a hidden <input> keyboard bridge
- editor: asset/hierarchy panels, schema-driven inspector, toolbar
- viewport: box rendering, camera frame, selection gizmo, drag/zoom/pan
- runtime: world/entity instantiation for play mode, input, camera follow
- api: PHP JSON project store with revision counter (409 on conflict)
- tools: CDP-based e2e smoke test
Co-Authored-By: Claude Fable 5.1 <noreply@anthropic.com>
admin
