8891f027db83cdd1168617a7454c9f2a45d3493d
4
Commits
| Author | SHA1 | Message | Date | |
|---|---|---|---|---|
  adminandClaude Opus 5.5
|
8891f027db |
Pick a pattern's sign in one row, as a song's (#364)
A pattern had two rows for its meter, Beats per bar and Beat, while a song has had one row Sign since #363. Both now pick from the same list. - The list of signs and how a sign becomes a meter moved to time.ts. Song and pattern share it. - A pattern keeps its meter in `sign`. The fields `beats` and `beat` are gone, a sign that is not in the list counts as 4/4. - Create pattern in a song hands the song's sign to the new pattern. - The four patterns of cbbf160bb7e8 were moved to `sign` by hand (three 4/4, one 3/4). The other projects only had 4/4, which stays the default. Tests: - Unit pattern/embedded: 30 green (1 new, 2 rewritten), the counter-test reading `beats` again turns 2 red - e2e 64 + 65 (melektaus-atx): ALL PASSED, 85 checks - Gate (melektaus-atx): CHECK EXIT 0, 272 files, 4215 tests Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> |
||
|
adminandClaude Opus 5.5
|
a295d233ed |
Give sounds, instruments, patterns and songs a sound FX (#352)
A sound FX could only be picked where something was played: on a Play
node, a track or an item of a song. A sound that should always sound
through the same effect needed that pick everywhere it was used. Now
the asset says it once, and every place that plays it follows.
- New row Sound FX on a sound, an instrument, a pattern and a song,
right before Bus. A sound goes through it on every voice, an
instrument on every note after its graph, a pattern on all its
notes together and a song on its output.
- The fx input of Play sound, Play note, Play pattern and Play song
and the Sound FX of a song item now read "From the asset" while
empty. None is a pick of its own, stored as `#none` like `#master`.
A pick replaces the FX of the asset, it does not come on top.
- A pattern item's Instrument reads "From the asset" instead of None.
The meaning is unchanged.
- A double-click on a sound item opens the sound, as one on a pattern
item opens the pattern.
- The tabs play through the FX of their asset. The Pattern and Song
tab put it on a bus of their own between the output and the bus of
the asset. The keys of the Pattern tab play there too.
- Notes of a pattern or song go through the FX of their instrument.
Its chain is loaded with the other needs of the sequence.
Decided without asking:
- Old items and Play nodes with an empty fx now mean "From the
asset". No asset has an FX yet, so nothing sounds different.
- The label is "From the asset" as on Loop and Bus, not "From asset".
- A sound used as a Sample, as the impulse of a Reverb or as the test
sound of the Sound FX tab plays without its own FX.
Findings:
- In e2e, `__gm.inspectorField('Sound FX')` and `('Instrument')` find
the group of the Assets panel first. The check asks for the last
match.
Tests:
- Unit asset-fx (new): 8 green. Six counter-checks each turned red.
- Field lists of sound, pattern and song: Sound FX added.
- e2e 65 (melektaus-atx): ALL PASSED, 46 checks (3 new). Counter-check
without the FX bus of the tab: that check red.
- Gate (melektaus-atx): CHECK EXIT 0, 268 files, 4142 tests.
- Not checked: how it sounds, the Sound, Instrument and Pattern tab
in the browser.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
|
||
|
adminandClaude Opus 5.5
|
3a52f2290f |
Mix sounds through buses and a master (#325)
Until now every sound went straight to the speakers. There was no point where all of them came together, so nothing could turn the music down against the effects, and a compressor or a shared echo over everything had nowhere to sit. The bus technique of #346 was there already, only the end of the chain was missing. - Bus asset (Audio): Volume, Sound FX and Into. Into is empty for the master and never offers the bus itself nor a bus that already goes into it. The list is worked out when the menu opens, so a change made meanwhile counts. A loop that is in a project anyway sends the buses on it into the master. - The master is no asset. Its volume and sound FX are two new rows under Master in Project settings, one undo step each. A project written before has 1 and none, which is how it sounded. - Sound, instrument, pattern and song have a row Bus, empty for the master. Play sound, Play note, Play pattern and Play song have an input bus: From the asset, Master or a bus. Inside a song or a pattern only the bus of the song or pattern counts. - Set bus volume (bus, volume, time, easing) and Bus volume. An empty bus is the master. The volume set holds for the whole run, across scenes, over that of the asset. GameRun resets it at start and end. Set sound FX parameters without a voice now reaches the sound FX of the bus picked in its new bus input. - SoundLibrary: the master is the bus "mix", each bus "mix:<id>". Every bus, the playing masters of #346 included, ends there, and only the master is heard. setMix sets them up once a context exists, so an editor nobody listened to opens no audio device. The same mix again changes nothing, which lets the editor hand it over on every change of the project. - The tabs play as the game does: Sound, Sound FX, Instrument, Pattern and Song tab through the bus of their asset and the master. - Pause game does nothing to the buses (the user's answer 4b). A game that wants quiet in its pause menu sets a bus volume itself. - Streaming long music files is #349, split off as asked. Finding on the way: the Into menu first worked from a list made when the inspector row was built. After another bus was sent into the open one, e2e 34 saw it still offered. It is now asked on open. The SoundLibrary tests expected voices to end at the destination. They now end in the master, which adds its input, level and pan to every wiring and two gains to every list. Those expectations are updated, nothing else in them changed. Tests: - Unit buses (new): 15 green. Ten counter-checks, each red on its own: loop check, bus picked, reset at run start, bus of Set sound FX parameters, master volume in the settings, and in SoundLibrary default into the master, voices into the master, run volume over the mix, no context before a play, a playing on its bus. - Unit sound-library: 90 green (5 new). Node catalog: 416 green (9 new cases). - e2e 34 (melektaus-atx): ALL PASSED, 75 checks (3 new). The voice of the Sound tab was heard on mix:<bus>, that bus into the other, that one at 0.5 into the master. Master volume 0.6 via the dialog, undo back to 1. - Gate (melektaus-atx): CHECK EXIT 0, 262 files, 4072 tests. Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> |
||
|
adminandClaude Opus 5.5
|
4ea752feef |
Draw notes for an instrument in a piano roll and loop them #333
Notes could only be played one at a time, by a key or a behavior. A pattern is a stretch of notes for one instrument, drawn in a piano roll and played in time through the scheduler of #332. Songs (#334) will lay patterns out on tracks. - New asset type pattern under the heading Patterns. Instruments are listed under Instruments now, since a heading is one per type. - Notes are a start and a length in ticks, a note number and a velocity, kept to their rules on load and in every command. The instrument, the length in bars, the grid, the meter and the tempo are rows in the inspector. The loop is the asset's own data, the whole pattern while none is set. - Grids from 1/1 to 1/32 and the triplets 1/4T to 1/32T, all whole ticks. The meter only moves the bar lines, the notes stay put. - The tab shows the keys down the left, a ruler with bars, beats, loop and start along the top, the notes between them and a velocity lane below. Keys the instrument plays nothing for are grey, the names of a drum kit stand on its keys. - A click draws a note on the grid line before the pointer, as long as the last one drawn or lengthened and as hard as the last velocity set. The body moves a note, the right end lengthens it, Alt leaves the grid. A drag on empty grid picks with a band, Shift adds, a right-click deletes. - Keys: Space plays, Delete, Ctrl+C/V/D/A, the arrows by a semitone or a grid step and with Shift by an octave or a bar. A paste lands where playing starts. Every gesture is one undo step. - A click on the ruler sets where playing starts, a drag the loop or one of its ends, its menu loops a bar or the whole pattern. - The wheel scrolls, Shift across, on the ruler or with Alt it zooms. Ctrl+wheel stays with the browser, Pixi listens passively. - Play runs the loop through the scheduler. An edit goes to it on the next window without a restart, a new loop or tempo counts from what is planned. Another pattern shown or a project opened stops it. - The time axis and the ruler are their own pieces in editor/music for the song tab. The rules of the roll are pure functions in rollView and rollEdit. Findings: - Music.play could start after a stop that came while it was still loading its files. A run counter makes the late start give up. Music.edit now loads what a new note needs as well. - A click on an end of the loop would have set the loop again. A press there only moves the end once it is dragged. Tests: - pattern.test.ts (new, 9) and piano-roll.test.ts (new, 16): model, grids, meter, held notes, sequence, commands, loop, round trip, drum names, time lines, rows, hits, bands, lane, edit rules. - e2e 64 (new) on melektaus-atx: ALL PASSED, 20 checks. e2e 4 with 29 asset types: ALL PASSED, 62 checks. - Gate on melektaus-atx: CHECK EXIT 0, 247 test files, 3839 tests. - Counter-checks: the move without its clamp, the sequence without the end of the pattern, the duplicate offset without whole grid steps each fail 1 test. Without passing edits to the scheduler the e2e check for a note drawn while playing fails, the rest passes. - Probe on stein2: the tab with a drum kit, before and while playing, looked at in two screenshots. Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> |