`Sqrt` already exists in the behavior graph (`data/Sqrt.ts`) and in particles
(`ParticleSqrt`); the shader was the only graph without it. `Pow` with exponent
0.5 does the same job, so this is convenience, not a missing capability -- a
radial falloff no longer needs a node whose purpose has to be read off its
parameter.
Like `Pow` it cannot go through `unary()`: GLSL leaves `sqrt` undefined below 0,
so the value is held there with `max(value, 0.0)`. That form takes a float
second argument for a `vec3` too, so unlike `pow` the exponent broadcast has no
counterpart here.
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
This reverses the design of the previous commit. `PropertyDef.scope` is gone
without replacement: a behavior variable is an object property again, without
exception, and sharing is something you point at rather than something you
declare twice.
A **Variables asset** is declarations and nothing else -- no graph, no position,
never placed, no tab of its own (`TAB_OF_ASSET` is already `Partial<>`, so that
costs no line). A `Variables` node names one through its new `variablesAsset`
setting, empty meaning the behavior's own variables as before, and then reads
and writes one value per key for the whole run. Its property list follows the
chosen source, which was the actual request: a value another graph declared is
now offerable, where before every participant had to declare the name itself.
That deletes more than it adds (-72 lines net): `globalConflicts` and its
run-stopping kind clash, `SetVariableScopeCommand`, the scope picker, both
object-inspector filters and the "shared by the whole run" note on the placed
object. A typo is no longer a silent second variable -- naming an asset is
picking from a list. And two Variables assets may carry the same key without
meeting, because the asset is the key, not the name. The one shape it copies is
the one that already existed: `Set state` picks its machine the same way.
Lifetime is unchanged. The bag is built at `BehaviorSystem.start()` from the
declarations and never written back, so playing in the editor cannot change the
project -- which is the whole reason a counter must not be an object property
(`World.syncToModel` would `commit()` it, and the coin counter would stand at 7
for good).
Full symmetry across that gap, without mirroring anything. Two named wires:
`Inspector.liveVariables` shows the values as they stand while a run is on and
falls back to the declarations when it ends, and `adoptDeclarations()` takes a
key into the run *only where the document changed it since the last sync*.
Without that condition any unrelated project edit would snap a running counter
back to its starting value; a counter-test bends exactly that and falls over.
Nothing was ever cached, incidentally: `GraphInterpreter` only pulse-caches
nodes without a `read`, and the variable node has one. The wire was missing.
The state machine `Scope` row is now an ordinary `enum` row through
`createFieldRow`. It was hand-built from an `HStack` with a ghost dropdown and
began ~34px left of every value above it; the explanations beside `Local` and
`Global` are gone from the menu, the sentence below the row keeps saying it.
Machine scope is otherwise untouched -- `StateMachineAsset.scope`,
`SetMachineScopeCommand`, `stateBag()` and its persistence all stand, so #59
stays closed as built and `Scope` as a type now carries machines alone.
Six counter-proofs, each biting at its own guard. One of them did not bite at
first: the suggestion list was computed twice, in `nodeSection` and
`portSection`, so only the browser test covered the request itself. It is one
named function now, `variableChoices`, with a unit test of its own.
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
A variable or a state machine declared `global` keeps one value for the whole
run instead of one per behavior instance. The scope sits on the declaration --
`PropertyDef.scope` and `StateMachineAsset.scope`, both optional, absence
meaning `local` -- and `local` is never written, so every project made before
this saves back unchanged.
**The name is the key.** Two behaviors declaring a global `score` mean one
variable; a behavior declaring `score` locally keeps its own. Kinds that
disagree about one global name stop the run before it starts, with the two
behaviors named; starting values that disagree are a warning on the behavior
that declares it, and the first declaration wins (`globalConflicts`).
The runtime needs no redirection layer. A global variable falls out of
`schemaForObject`, so it never reaches `entity.props` -- and then the whole rule
is "whoever declares the name takes their own value" (`graph/sharedState.ts`).
The `Variables` node is untouched and stays transparent: switching a variable to
global breaks no existing graph, because `GraphInterpreter.readAll` builds a
fresh object per read anyway and only asks `port.key in all`.
That same cut answers the inspector. A shared value has no owner, so the placed
object shows no row for it and can hold no override -- `SetVariableScopeCommand`
takes the deviations that were there and undo gives them back.
Both places say it in words rather than leaving a glyph to be guessed: the
declaration explains the mark below the list, and the placed object names the
variable it no longer holds instead of claiming the behavior declares none --
which is what it said before, untruthfully. Screenshots of the e2e run turned
that up; no check had been looking at it.
`SharedState` hangs off `NodeContext`, is built in `BehaviorSystem.start()` from
the *declarations* rather than from any instance (a global variable exists
before its behavior is placed), and is thrown away with the run: nothing is
written back, not even in the editor run. `GraphInterpreter.call` passes it on
through `...ctx` while nested calls keep getting fresh local variables, which is
why `program.defaults` is stripped of global keys.
Two traps this hit. `defSignature`/`assetSignature` have to carry the scope or
the inspector does not rebuild after the switch -- and a state machine has no
rows at all, so its scope is appended to the signature by hand. And the object
inspector does not go through `schemaForObject` for behaviors, it reads
`asset.variables` directly; filtering in one place was not enough, and no unit
test covered that path. The e2e caught it (`global: true` where false belonged),
and the rule now lives in one named function, `objectRows`.
Scopes `object` and `scene` are deliberately not built. The object case already
has a route (`Object by name` -> `Properties`), and a run knows exactly one
scene, so `scene` would be indistinguishable from `global` until #39 exists.
Closes#59: a machine's scope is a word on the machine asset, not a setting per
`Set state` node, so the same machine cannot live in two places at once.
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
`deserializeProject` builds each asset's effective schema in pass 1 and coerces
`props` against it in pass 2. For a behavior that schema was
`[...COMMON_PROPS, ...variables]` -- but `runInEditor` lives in
`ASSET_SCHEMAS.behavior`, not in `COMMON_PROPS`, so `normalizeBag` dropped the
value as undeclared. The flag therefore survived no save: every reload switched
it back off.
The fix is the full schema, `schemaFor('behavior')`, which is what
`schemaForAsset` hands out everywhere else.
Found by a round-trip test comparing the whole project rather than one field. An
existing test had the loss written down as its expectation
(`{ enabled, speed }`), which is why nothing ever reported it.
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
A state keeps its `in`/`out` exec pins in the model and the editor never draws
them. That is the whole trick: connecting, undo, deleting a state and saving all
keep working untouched, because `normalizeGraph` filters nodes and never edges,
and no edge ever checks its port key against a NodeDef. Only two places change --
`NodeView.redraw` stops drawing the row, and `portAt` refuses to hand one out, so
an invisible pin cannot be grabbed either.
Transitions are drawn by right-clicking a state, `Make transition`, then clicking
the target. The armed mode takes the same shape as a live drag, so the existing
preview draws it with no second code path, and it dies with Escape, a click on
empty canvas or a switch to another asset.
Removing the pins removed the only handle a transition had: edges have no
hit-test anywhere, and the pin right-click was the sole route to Disconnect.
The inspector's TRANSITIONS OUT / TRANSITIONS IN lists are therefore not a
convenience, they are the delete path.
`GraphEdge` gained an optional `label`, which `normalizeGraph` has to pass
through explicitly or a saved name is dropped on load. `State transition`
replaces `Next state`: it takes the machine on an input port and the name from a
picker, and resolves against the *current* state. Names are deliberately not
unique across a machine -- two states may both have an `alarm` -- so a node named
`alarm` moves whichever state has one, and an empty name follows the single
unnamed edge.
The geometry moved to a Pixi-free `transitions.ts`: a gap to the box border, and
a fan that puts a pair of opposite edges beside each other instead of on top of
each other. Keeping it as plain maths is what let a screenshot bug become a unit
test -- an earlier pin-to-pin line ran under the target node and took its
arrowhead with it, because `nodeLayer` sits above `edgeLayer`.
One limit stands and is not fixed here: `ConnectCommand` rejects a second edge
between the same two states ("Already connected"), because every transition
hangs off the same two ports. With names, `A --alarm--> B` beside
`A --seen--> B` is a sensible pair, so this is worth its own issue.
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
Four ways erase a derived port and take no edge with them: deleting a state,
deleting the `State machine` literal, deleting `Behavior start`/`end`, deleting
the asset. The common cause is `RemoveNodeCommand` clearing only its own graph,
so the fix sits in `drawnDef` (graph/nested.ts) and touches no delete site.
A right-click on an edge goes through `view.portAt` only — there is no curve
hit-test. Without a port row such an edge is not merely invisible, it is
unreachable, so the ghost row is the handle Disconnect hangs on.
`resolveDef` stays untouched: it is the truth for interpreter, compiler,
ConnectCommand and dropTarget, so nothing runs or connects through a ghost
without a second guard.
A particle source can wear a shader asset the way a sprite does, and it is the
cheapest place in the editor to wear one: a shaded sprite gives up its batch and
costs a draw call of its own, while `ParticleContainerPipe` breaks the batch for
every field regardless. Five hundred shaded particles are the one call five
hundred plain ones were.
The fragment the compiler emits needed no change, only a second vertex stage:
Pixi's particle vertex is GLSL ES 1.00 and ours is ES 3.00, so it is translated
rather than invented. What it sees is a particle's picture, not its life — the
buffer carries five fixed attributes and takes no sixth, so age, index and seed
stay on the graph, which is what the graph is for.
Two things the issue did not ask about:
`Shader.resources` is an accessor over the names its constructor declared, so a
slot that is not declared becomes a loose JS property and is never bound. The
adaptor writes `uTranslationMatrix` into whichever shader the container names —
without an empty block for it the vertex gets no matrix and the particles land
elsewhere.
`schemaOf` in serialize.ts hung on `schema !== schemaFor('sprite')`, an identity
check a source never satisfies, so its shader values would have been dropped on
save.
A source is the one asset drawing rows from two graphs, so a name can arrive
twice. Its own row wins and the uniform keeps its default; nothing is rejected
on the shader's side, because the collision exists only at this one wearer.
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
Particle age and shader time each read performance.now() off their own
library, and the world got the frame's delta straight from the ticker. Three
clocks, so a global time scale would have been three multiplications and a
pause three separate freezes.
core/time.ts holds one clock instead: it accumulates dt x scale per frame
rather than reading the wall clock, and Editor.tick hands the very step it
took to the play session, the editor run and the animation preview. Delta
time, particle age, shader time and that preview are the same quantity now,
so the scale is a single multiplication and a pause is that scale at 0 —
nothing underneath needs rebasing, because the clock itself stands still.
The Math.min(dt, 0.1) caps in PlaySession and EditorRun are gone: the cap
(MAX_FRAME) now sits on the raw frame before scaling, and capping twice would
make the world run slower than the particles at scale 2.
A pause gates the scale rather than overwriting it — effectiveScale() answers
0 while paused, and for anything that is not a positive finite number, while
gameClock.scale keeps its value. A slider later survives a pause that way;
the issue asks for none yet.
The clock goes back to zero at both ends of a run, so a run is reproducible
from second 0 and the scene view looks freshly loaded after Stop. Resetting
only on Stop would not do it: the editor clock runs on afterwards, and the
next Play would start at "seconds since the last Stop".
The trap in that: ParticleField keeps its origin as an absolute second of
this clock, so after a reset it lies in the future and every particle would
age backwards. One line in sync() starts such a field over, which covers the
scene, the game and the tab preview at once — and fixes an older bug of the
same shape, where releasing a particleTime() freeze left the preview empty
for good.
Found while measuring that: ParticlePreview stood at second 0.5 by computing
the clock reading that would mean 0.5 since the field started. Over 200000
random origins the round trip misses the last bit in 18.8% of them and shows
one particle too few in 9.4%, because floor(0.5 * 20) comes out 9. The check
had been flaky since it was written. The panel hands the field the age itself
now (ParticleField.hold), and the faked clock is gone.
833 checks (824 + 9), 931 unit tests (921 + 10).
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
Behavior and Container draw an icon because isSymbolType() is true for them,
but that predicate does not mean "draws an icon" — it means "is editor
decoration". Four places read it that way: collectWorldItems, GameViewport.
collectFrame and syncDrawOrder all drop symbols out of the running world and
the game picture, and placementOf() gives them an upright unscaled box.
Listing 'particles' there would have handed the source an icon and taken away
its particles, in the scene view as well as in the game.
So the two questions are two functions now. hasSceneIcon() says a type draws
an icon; isSymbolType() keeps meaning decoration. The icon itself is a
SceneViewport decoration, which is editor-only for free because GameViewport
never syncs decorations.
A ring (r 10, #c26a1f) with four sparks, upright and unscaled like the other
symbols, its middle left open — unlike Behavior and Container a source draws
something of its own, and the field is densest exactly there. The name sits
beside it and a dashed line runs to the parent, same colour.
Found while writing the tests: the source's grab box scaled with its transform
while the icon did not, so the two came apart. placementOf() returns only the
translation for 'particles', making the box the upright 24 x 24 that covers
its icon. The source's own transform still feeds every particle untouched.
824 checks (821 + 3).
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
Speed and Prewarm are not state and not a second loop: both are arithmetic
on the clock argument the field already passes to every particle formula.
fieldTime = elapsed * timeScale + prewarmOffset, a pure rule next to
liveRange, called at the one place ParticleField.sync forms its time, so
preview and world inherit it together.
Prewarm offsets by one lifetime because that is the smallest offset which
fills a continuous emitter; a burst is dead at time >= lifetime, so the
same offset would skip it entirely and it is suppressed there.
The tab's slider counts wall-clock seconds, so its span divides by the
scale. A missing row falls back to 1 / off, so old project files need no
migration.
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
The asset type `particles` is placeable and carries a graph at the same time —
`behavior` was the blueprint. Because a continuous emitter gives birth to particle n
at time n/rate, the whole field is a function of the clock rather than of the frames:
no ring-buffer bookkeeping, exact time jumps, reproducibility as a measurable property.
compile.ts follows compileShader's frame but emits JS closures into a Float64Array
instead of GLSL, and without eval; a node with two consumers is evaluated once.
Drawing is one Pixi ParticleContainer per source, so one draw call.
Collision, wind and braking in flight are out for good — that is the price of the
formula model, not an omission.
The tab count goes from nine to ten, which is exactly the case #84 was built for one
day earlier: at 1280 px the row no longer holds every tab, so guard 14b now asks for
hidden.length > 0 instead of === 0.
The default of the Edge param and the address mode the shared sheet physically
carries were the same constant; changing the value would have turned every
sentinel with it and given each shader sprite a full copy of its texture.
SHEET_EDGE ('mirror', what TextureLibrary uploads) is now separate from
DEFAULT_EDGE ('clamp'). A graph whose Sample reads nothing but its own pixel
draws with the plain sheet whatever the Edge says, so the common shader costs
no second copy.
Without a shader the quad's coordinates never leave 0..1, and mirror-repeat
reads like clamp within a texel - so clamp is what a sprite shows anyway.
An upload sends its file name next to the raw bytes, and the server keeps
it in a sidecar next to the content-addressed file. Both pickers caption
every tile and row with it, and an asset made there is named after the
file instead of "Texture" / "Font". Last upload of the same content wins.
The API's own set_error_handler ignores error_reporting(), so @-silenced
warnings still throw: a missing sidecar took the whole listing down with a
500. Existence is checked instead of suppressed.
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
A font asset holds a file and nothing else, the twin of a texture: the server keeps it
content-addressed under data/fonts/{sha256}.{ext}, with the format read from the file's own
four-byte signature (finfo reports fonts inconsistently across libmagic versions). A text
wears one through its ordinary Font property, so overrides, reset, undo and the Properties
node come for free; no font means the editor's own typeface.
The picker lists everything the server holds and renders each row in the face it offers.
The family name is gm-font-<hash16>, never the name inside the file, so two "Regular" cannot
collide. WorldViewport.syncText is the single place that draws it, which covers scene, game
preview and play at once.
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
shaderFingerprint(graph) covers node id/type/params/ports and edge endpoints only;
x/y, collapsed, folded and edge ids stay out. ShaderLibrary keys on it and counts
compiles (__gm.shaderCompiles()). Measured before: one compile per preview step of a
node drag (12 for a harness drag); after: 0, a param change exactly +1.
Co-Authored-By: Claude Fable 5.1 <noreply@anthropic.com>
Four new rows on sprite, text, collider and container (block TRANSFORM):
scale, rotation in degrees clockwise, mirrorX, mirrorY. As properties they
get override/reset/apply, loading of old projects, write-back after play and
the Properties node for free; camera and behavior have none.
The hierarchy composes T*R*S per level (composeAlongChain replaces
sumAlongChain), so children rotate and scale with their parent. Reparenting
and grouping keep the look (carriedTransform). Drawing goes through
placeNode, the gizmo is a polygon, cull and objectRect use the AABB, drags
are computed in the parent's system.
Colliders are oriented boxes: SAT for box/box, box-circle in the box frame;
exitDistance replaces axisSeparation/axisCorrection, moveAndSlide moves along
the object's own axes.
Co-Authored-By: Claude Fable 5.1 <noreply@anthropic.com>
Fragment-side coordinate nodes instead of vertex nodes: the quad stays the
quad, a UV read plus a sample at a computed coordinate covers flip, scroll,
wave, pixelate and scanlines. Time is a uniform only when a Time node reaches
the Output; a viewport that drew a Time shader redraws from the ticker so the
Scene tab animates without a running world. Edge (Mirror/Repeat/Clamp) is a
second texture variant in TextureLibrary because WebGL binds no TextureStyle
resource of the shader. The compiler now emits #version 300 es first: Pixi
only compiles as ES 3.00 when the fragment says so, and textureSize needs it.
Co-Authored-By: Claude Fable 5.1 <noreply@anthropic.com>
A sprite's picture is now a Mesh (unit quad, sibling of its Graphics node, which keeps
only the hit area); a worn shader replaces Pixi's fragment in that draw, so there is no
intermediate texture and no extra render pass. Measured on the HD 630: 400 shaded
sprites hold 60 fps (was 34), 800 hold 56 (was 20).
Two Pixi facts the code leans on: a mesh's texture is bound only for Pixi's own shader,
so GraphShader.wear hands it over; and MeshPipe caches whether a mesh batches and
re-checks it only in a frame without structure changes, so switching a shader on or
off calls mesh.unload().
The console panel mirrors console.group/groupCollapsed/groupEnd and fills the %s %d
%o %c directives, so Pixi's deprecation warning shows its head, not only its stack.
E2E 12 guards against the addChild-on-Graphics warning, 28 counts shaders instead of
filters.
Co-Authored-By: Claude Fable 5.1 <noreply@anthropic.com>
The + Property menu of the Properties node offered every shader's params
for every sprite. Each shader row now carries its shader name, and a name
shared by two shaders lists both: "brightness (Adjust colors, Neon glow)".
Sprite-owned rows stay unlabelled.
The note hangs off a map keyed by the def object, not by the name -- a
sprite property and a shader param may share a name (#63), and keying by
name would label the wrong row.
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
Dropdown labels are now Linear (default) and Nearest; the stored values
linear/nearest are unchanged, old project files load as before.
e2e 12c-ii measures in Play at camera zoom 1.37 (screen scale 1.434): a
Nearest edge sampled across seven pixels is byte-identical with and without
a neutral Adjust colors shader, and brightness 0.5 on the same path darkens,
so the pass really runs there. New hook __gm.gameRect(id).
Co-Authored-By: Claude Fable 5.1 <noreply@anthropic.com>
No input, one Value param (step 0.05, drawn on the node), output `value`
as a float literal via floatLiteral (2 -> 2.0, NaN -> 0.0). No uniform,
no sprite row - that is the difference to Property.
The e2e negative check for "no behavior node in the palette" now uses
Boolean as its marker, and step 28 types the palette search first
because the palette scrolls from twelve entries on.
Co-Authored-By: Claude Fable 5.1 <noreply@anthropic.com>
Output gains a number input `alpha`; unconnected it reads the texel's
alpha, like `color` reads the texel. The epilogue premultiplies with the
resolved alpha. New `Texture alpha` node exposes texel.a for maths.
PortDef.inline=false keeps the alpha port without an inline field: every
number port is inline by default, and a typed default of 0 would have made
every shaded sprite invisible. The compiler's texel fallback is typed:
colour ports get rgb, number ports get texel.a.
Co-Authored-By: Claude Fable 5.1 <noreply@anthropic.com>
A shader is an asset carrying a node graph (Texture color, Output, Property,
Color, Add/Subtract/Multiply/Divide, Mix, Luminance) that compiles to the GLSL
fragment of a Pixi filter. The Shader tab reuses the Behavior canvas; a sprite
wears a shader through its Shader picker, and the rows below it are the
graph's Property nodes. Property schema, resolution and deviation take the
project because a sprite's rows now live in another asset. The built-in
registry of the prototype is gone; "Adjust colors" ships as a graph in the
fixture and the three example games.
Co-Authored-By: Claude Fable 5.1 <noreply@anthropic.com>
Order per instance: On start -> On enable -> On update ... -> On disable
-> On destroy. On enable fires right after On start and whenever the
behavior comes back on (itself and its parents); On disable in the frame
it goes off, the instance stays frozen. On destroy fires when the entity
leaves the world (Destroy node, child of a destroyed object) and when the
world is torn down on stop/restart, preceded by On disable if still on.
A new On start node added while playing still does not fire for a
running instance (kept as is, documented in the wiki).
Co-Authored-By: Claude Fable 5.1 <noreply@anthropic.com>
A state machine is an asset whose graph holds one `State` node per state
(no ports, name as title), edited in a new "State machine" tab that reuses
the graph canvas: right-click places "State n", snap toggle shared with the
Behavior tab via SnapToggle. `statemachine` is a value kind like texture
(port, literal node, variable, struct field, tagged list item).
Behaviors use it through `State branch` (one exec output per state) and
`Set state` (one exec input per state; the interpreter now hands `run` the
entry port). States live per behavior instance in NodeContext.states, with
no initial state. Ports derive from the inline picker or a wired
`State machine` literal; BehaviorLookup became GraphLookup with
behavior(id) and machine(id).
The Graph tab is labelled "Behavior" (key unchanged). Unit tests
(state-machine, kinds, catalog, ports), e2e step 26 and README added.
Co-Authored-By: Claude Fable 5.1 <noreply@anthropic.com>
- applyCommands sit on ObjectEditCommand with a revert hook instead of
five copies of the same preamble and undo
- actionIf replaces six identical Reset/Apply menu blocks, addNameField
the three name rows, assetLink the two asset links
- requireStructuralObject replaces ten two-line preambles and drops the
duplicate holder lookup
- __gm.objectsOf had no caller; the SMB remnant in e2e.sh is gone
Proven: check.sh 797 tests, full e2e 633 checks, smokes 24/19/20 against
the same bundle.
Co-Authored-By: Claude Fable 5.1 <noreply@anthropic.com>
- `.gitignore` said `index.html` unanchored, which also caught the Vite source page;
a fresh clone could neither `dev` nor `build`. Anchored to `/index.html`, page added.
- Removed GM_REMOTE (tools/remote/gm-browser.ps1 and the ssh/scp branch in browser.mjs):
the Windows test machine is gone and the only flaky check that lived on it is closed (#37).
- Removed `npm run preview`, undocumented and unused.
- Comments: wrong number in collider.test.ts (250 → 200), the "declarations used to…"
history in listItems.ts and friends, the 24 px/28 contradiction, section banners in
nodes/index.ts, node-catalog.test.ts and api/index.php, name paraphrases, and the stale
step numbers in tools/e2e/11-…23- from the old global count.
- README: asset types include `animation`, kind order Number/Text/Boolean, tagged colour
and texture items, 6/5 kinds, the `Texture` node, `./build.sh`, PROJECT_FORMAT_VERSION,
and the file tree (kinds.ts, listItems.ts, propertyPorts.ts, Breadcrumb.ts, beads.ts,
tools/assets/).
- tests/helpers.ts takes the duplicated `findObject` and `sceneWithCamera`.
Proof: ./check.sh 797 tests, full e2e ALL PASSED 633 checks against this bundle.
Co-Authored-By: Claude Fable 5.1 <noreply@anthropic.com>
A kind like colour or texture used to be spelled out in five parallel
lists, its port type, its empty value, its glyph, its label and its list
tag - 22 literal places for texture alone. core/properties/kinds.ts now
holds one row per kind and the rest is derived from it, so adding a kind
is one row. The five literal nodes collapse into literals.ts, the six
kind menus into one helper.
Number, Text, Boolean is now the one order everywhere; the variable and
port menus used to list Boolean before Text.
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
- `Texture` and `Color` can be picked as a variable kind, a struct field
kind and a declared port kind; a new `Texture` node hands a picture id
into the graph. Declared, a texture is its bare id – the `$texture` tag
stays a list-only thing.
- The `String` node is labelled "Text" like its kind; the type id stays.
- Whole-number inputs (`Item at`, `Set item`, `Sub list`, `Fill`,
`Repeat`, `Substring`, `To text`) show no decimals (`int()` in shared.ts).
- All server projects are reseeded, so `legacyNodes.ts`,
`migrateDeclaredLists` and the `ownerId` fallback go, with their tests.
- Note `reseed-because-of-list` moved to done/; new note `refactor-types`.
Co-Authored-By: Claude Fable 5.1 <noreply@anthropic.com>
A list no longer says what its items are. ListDef.items, ListDef.fields,
ListFieldDef.items and SetListItemsCommand are gone; the single seam is
src/core/properties/listItems.ts. JSON already tells number, text, boolean
and struct apart, so only two kinds need a tag: {"$color": n} and the new
{"$texture": id}. Field names cannot start with "$", so a tag never
collides with a struct field. On a data link a texture item arrives as
its bare id; the graph has no images.
List tab: the mark in front of each row is the kind picker, "+ Item"
asks for the kind, both are ordinary value edits (one undo step). A list
inside a struct field only offers the flat kinds because the depth rule
forbids a struct item there (ListAccess.kinds); the menu used to offer
it and silently do nothing.
Legacy lists that declared items: 'color' are tagged on load.
Actor demo: the four walk animations and four standing frames live in
two list variables of texture items indexed by facing (Item at), so the
graph can be rebuilt in the editor. The stand frames get their grid ids
back; 44 nodes instead of 46.
Also: the user's edits to on-start-during-play.md and the new note
reseed-because-of-list.md.
Verified: check.sh 794 tests, full e2e 631 checks, smokes 24/19/20.
Co-Authored-By: Claude Fable 5.1 <noreply@anthropic.com>
An animation asset is a list of pictures (whole textures or frames) with
frames per second and Loop/Once/Ping-pong playback. A sprite wears it
through its texture property, so the picker, instance overrides and the
Properties node work unchanged; there is no dedicated play node.
A different animation starts from its first frame, the same one set again
runs on, so a graph may choose Run or Idle every frame. The clock lives on
the entity, not in props, which the world writes back as overrides. The
AnimationSystem ticks before behaviors, and On animation finished fires
once when a Once animation reaches its end.
The Animation tab plays a preview above a frame strip: reorder by dragging,
Delete, duplicate, + Frames, pause/resume, and wheel zoom about the pointer
with pan and Fit. Scene and Container tabs show the first frame; edit mode
has no clock. Right-clicking a texture creates an animation from its frames.
Button now measures its label with the bold font it draws in, which cut
the Animation tab and red dialog buttons short.
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
The graph was only locked by five edit-mode guards in GraphCanvas. The
running game reads the graph by reference each frame, so a new node, edge,
changed value, disconnect or undo takes effect from the next frame. Stop
discards these edits like everything else changed in play. A new On start
node does not fire for a behavior that has already started.
During play every data output shows the value it last produced, in the
highlight colour and refreshed ten times a second. Values are kept per
graph, because node ids are only unique within one; with several
instances the most recent value wins. The Variables node reads the live
variable bag, so only its own outputs are kept, as a snapshot.
Each time an exec edge fires, a bead runs along it in 0.3 s, at most one
every 0.15 s per edge, following the same curve the edge is drawn with.
Beads run on game time and freeze while paused; the game logic is
unchanged.
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
A reference search over every export and method in src/ found code that
only tests still called, or that was never called at all:
- RemoveSceneObjectCommand: the product only removes through the
multi-object command; the tests now use that one too.
- NodeRegistry.requireNodeDef: a second function of the same name in
commands/require.ts raises a CommandError instead of throwing, and is
the one the product uses. The twin invited the wrong import.
- isTextureAsset, listContainers, AssetTabEditor.show,
FocusManager.destroy, KeyboardBridge.selectAll and the getters
ColorField.value, ListView.selected, NumberField.number.
Also: Theme.controlActive now matches the resting control colour, and a
new note asks what editing the graph during play would take.
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
Collapsed, the node reads "Set 2 variables", "Get width" or "No properties";
expanded it is always "Variables" / "Properties". The Properties node shows
its object type (and behavior) as a line under the title instead.
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
Get/Set property, Get/Set properties, Set enabled and Set text are gone.
A single Properties node takes a fixed "object" input; every chosen
property is an output that reads the current value, and one switched to
Set is also an input written when the flow arrives. Exec pins only exist
while at least one entry writes.
The node carries a type (Sprite, Text, Collider, Camera, Container,
Behavior, Any) that decides what "+ Property" offers: the fields of that
type, the variables of the chosen behavior, or for Any a kind to pick
and a name to type. Each port takes the default and field of its type,
so a Camera width starts at 640. Switching the type keeps the ports and
marks those the new type lacks. At runtime the type is only an editor
aid; the node writes to whatever object it gets.
Old project files are converted on load. The type is inferred from the
keys: the first object type that has them all, else the one behavior
that declares them all, else Any. enabled belongs to every object, so a
converted Set enabled lands on Any.
The jump-run and tetris seeders use Properties throughout; draw-piece
switches its cell on in the same node that sets the colour.
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
A single node now lists any number of variables. Every entry is an output
that reads the current value whenever it is pulled; an entry switched to
Set is also an input and is written when the flow arrives. Exec pins only
exist while at least one entry writes, and all inputs are read before any
write, so one node can swap two variables.
Get/Set variable, Get/Set variables and Variable are gone. Old project
files are converted on load: each old node becomes a Variables node with
the same variables, edges and typed values.
A written port without a typed value now shows the zero of its kind on
the node body, matching what the inspector shows and what the run writes.
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
Get properties / Set properties work like their variable counterparts:
one port per chosen property, an unconnected input writes its inline
value. A port chosen from the built-in list keeps that property's field
and default (height starts at 100, color is a colour field). "object" is
reserved for the fixed input, checked by the command and on load.
The property picker names the owning type ("Sprite width"), and text
fields can now carry a suggestion list; Get/Set property use it.
Double-clicking a call node shows the path of opened behaviors under the
graph header. Clicking an entry jumps back and trims the path; choosing
a behavior any other way hides it. Reopening a behavior already on the
path steps back to it instead of repeating it. The bar shows before the
graph switches, otherwise it clips the graph that was just fitted.
The "Add node..." header button is gone; nodes come from the context menu.
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
Get/Set variable nodes now title themselves "Get <name>" / "Set <name>", and
the new Variable node just "<name>"; the title is the same folded or open,
and a collapsed node shrinks to it. The redundant "Variable: <name>" row is
gone unless the variable was deleted ("<name>?" is the only hint then).
The Variable node sets its value when an exec flow arrives and exposes the
value at any time. Its output is read when a downstream node pulls it, not
frozen at the write, so count = count + 1 is one Variable node plus an Add.
Get variable keeps reading once per pulse: switching it would change the
behaviour of existing games.
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
Split GraphCanvas (1076 -> 831 lines) into EdgeLayer and graphMenus;
the port and marker menus were the same list and are now one function.
Value specs of the inspector and the list tab share valueSpecs.ts, and
the remaining copies (compound commands, type glyphs, typed asset
lookup, name rule, play/editor world setup, marquee) are merged.
Four copies had already drifted apart; merging them fixes:
- "Disconnect N links" in the port menu is one undo step, not N
- "+ Add collider" is hidden on a placed container instance, as in
the hierarchy menu, instead of always failing
- a bool property coerced from the text "false" becomes false
- a port command on an unknown node type reports instead of crashing
Comment-only edits leave the bundle byte-identical. README corrected in
35 places (step limit, jump-run clock, suite duration, 409 body, ...).
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
The sprite takes the whole image at its pixel size and the texture's name,
numbered like any other clash. CreateAssetCommand now accepts starting
properties; they go through the schema in execute, so an unknown key or a
bad value is refused before the project is touched, and one undo removes
the asset.
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
A chevron in front of the title toggles it without touching the selection,
and right-click offers Collapse node / Expand node for the whole selection
as one undo step. A collapsed node draws its title bar alone; every link of
one side meets at a single point on it, and hidden links there share one
mark per side, since per-port marks would stack on the same pixels. It has
no ports to grab, so a link dropped on it connects nothing.
Like hiding a link this is drawing only: collapsed is saved on the node and
an expanded node leaves no trace in the project file.
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
The port editor gets 'From variable' next to '+ Field': pick a struct variable
of the behavior and its fields land as ports. It only adds - a field the node
already declares stays as it is, because it may carry an edge - and the entry
is disabled once there is nothing left to add. A list of structs counts too:
it declares the shape of every item, which is exactly the bundle a Pack builds
for it. A color field arrives as a number port; the graph has no color type.
AddPortsCommand is new underneath: adding five ports had to be one undo step,
and it checks every key before it appends a single one, so a collision does
not leave half the list behind. AddPortCommand is a three-line subclass of it,
which leaves its sixteen call sites untouched.
An unconnected list input is a button into the List tab instead of a number
field; a struct field can hold a list, so ListSlot carries an optional field
name and the three owner cases only say what sits at a key; and a list
variable picks its item kind in the inspector (marker doubles as the chooser),
so a list of structs no longer has to be born from a project file.
The declaration keeps the storable shapes finite: a struct field may be a list,
but that list holds primitives only, so list->struct->primitive and
struct->list->primitive are the two deepest forms.
check 674, e2e 483, jump-run 24, Tetris 19.
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
A list item may now be a struct. The depth is bounded in the declaration
rather than by a comment: FieldKind (number|text|boolean|color) says what a
struct field holds, ListItemKind adds struct on top and says what a list
holds, so list -> struct -> primitive is the deepest storable shape and
sameValue stays finite. A struct item renders inline in the List tab, which
is why it needs no path in the slot address.
Four paths silently assumed a list item was a primitive: sameValue compared
items with ===, textOf would have printed [object Object], asListItem turned
a struct into text on Set item and Fill, and Index of used indexOf, which is
reference equality and could never have found a struct.
Tetris now runs on bundles. shapes is 112 {x, y} structs instead of 224 loose
numbers, piece and the candidate are structs, so Next move hands back a whole
candidate and each strand packs only the field it changes, since mergeStruct
leaves the rest standing. Declared behavior ports drop 49 -> 35, the master's
variables 18 -> 13, its graph 84/94 -> 69/76 nodes/edges.
Get variables and Set variables declare their ports from a list of variable
names, the way Pack and Expand already do, so one node can read or write
several at once. Renaming a variable rewires them, because there the port key
is the variable name.
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
The value type was already there: StructValue, textOf, sameValue,
writeTyped/mergeStruct and the struct port type came with the first
part, and Get/Set variable carry any-ports, so a bundle already flowed
through the graph unchanged. What was missing was the declaration.
PropertyDef gains kind 'struct' with a list of fields, VARIABLE_KINDS a
fifth kind, variableDef a fifth parameter. A declared field is a
primitive - a list field would need a nested editor and therefore the
path in the slot address, the same step "a list of structs" is waiting
for. coerceValue now returns PropertyValue rather than FieldValue, the
first value type that is not a field; none of its five callers break.
In the inspector a struct variable is a block, not a tab. The list tab
exists because hundreds of rows fit in no inspector row; a struct is the
opposite case - few fields that fit under each other. It is the port
editor Pack already has, one level down and with a value column: type,
key and default value in one place. A placed object sees the same fields
as plain value rows: overriding yes, declaring no.
Adding or removing a field touches the declaration, the default, the
behavior's value and every instance override in one command, so a stored
value can never keep a shape its declaration no longer promises. The row
handlers read the bundle at the moment of the change rather than closing
over a snapshot - a field writes the whole bundle, so with a snapshot
the second edited row revives the first one's old value. defSignature
carries the fields, otherwise a new row appears only at the next
rebuild.
Fixes a fixture fault this uncovered: step 10 pushed its text object
into the scene without instanceEdits, which overrideSites walks with
Object.entries. AddStructFieldCommand is the first caller to reach it
from that state; the step was green alone and failed three checks in the
full suite.
Moves the dynamic-ports note to done - all three of its parts are built.
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
A short list opened after a long one drew all its rows stacked on one
point. The fault was not in the list tab: rebuild() handed the row stack
to setContent() while it was still empty, so the content was sized to
max(rows, viewport) = the viewport. The rows arrived after that, and for
a short list the same formula yields the same height, so resize() saw no
change and skipped layout(). A long list changes the height and never
showed it.
relayoutContent() now runs whenever the content changed, rather than
leaning on resize()'s change detection - that detection is the wrong
instrument for "the children moved".
The list tab was the only affected caller: the panels use ListView,
which positions its rows itself, and the inspector fills its body
before setContent.
Also drops the comma line under the list. Every section that can carry a
list supplies openList, so the comma fallback in fieldFactory was
unreachable; listToText/listFromText go with it. The list-value test now
covers coerceListItem through coerceValue instead, so the boolean
spelling stays guarded.
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
The Outputs setting is gone. A Sequence now keeps one free output below the
last connected one: nothing plugged in is one output, connecting the spare
grows a new one, unplugging the bottom edge shrinks it back.
It counts the last *connected* port rather than the number of edges, so
unplugging a middle one leaves a gap instead of silently dropping an edge.
Removing the setting also removes a bug it caused. Typing in the Outputs field
did nothing and the arrow keys did nothing, while dragging the value worked:
onInput fires per keystroke, the preview writes into node.params, that emits
'project', and Inspector.refreshValues() sees the node's signature change --
the port list is part of it -- so it rebuilds and destroys the row being typed
in. A drag survives because it keeps receiving globalpointermove on the old
widget. refreshValues() has no focus guard where refreshLive() does; the trap
is still there for the next typed field that changes a node's shape.
Ports that depend on the edges around a node mean derivePorts needs the graph,
not just the params, so resolveDef and portSignature take it too. And a node
whose ports are derived cannot know how many it has from its type, so run is
handed the definition resolved for it.
Ports that vary per node already existed, but only for the three nested-behavior
types, and the rule for them sat as a switch on type names in nested.ts – the
one place in the project that knew node types by name. It dissolves into two
optional contracts on NodeDef, so a type carries its own rule:
declaresPorts the node holds an editable list, shown as a section in the
inspector – behavior start/end, and now Pack/Expand
derivePorts the node computes them from its settings – Sequence from a
count, Run behavior from the behavior it names
Sequence gains an Outputs setting (2 to 26). Its keys stay a, b, c and count on
with d, e, so the edges of the sequences already out there survive.
A param can now take a port away, and the edge on it would stay: it draws as
nothing yet survives every save, and comes back to life if the port returns.
SetNodeParamCommand takes those edges with it, which also closes the same leak
that switching a Run behavior node's target has always had.
The port editor addresses its node by id rather than by type, so two Pack nodes
can live in one graph, and it calls the rows Fields when they are not a
behavior's signature.
adminandClaude Opus 5