c74b6b1cabcd3ecb757a81240f64ebf68ae00cd7
23
Commits
| Author | SHA1 | Message | Date | |
|---|---|---|---|---|
  adminandClaude Opus 5.5
|
808e1eefc2 |
Clean up duplicates and dead code, and fix the + menu check (#85)
Refactoring round 9 covers everything since round 8 ( |
||
|
adminandClaude Opus 5.5
|
8f9d373d7b |
Scroll the + menu to Vector art before picking it in e2e 47
The suite to
|
||
|
adminandClaude Opus 5.5
|
9e869df063 |
Free a redrawn picture only once no shader names it (#293)
Editing a vector drawing made Pixi warn "destroyed while still bound
to a shader", twice with every change, once it had begun. It began
where an object wears the drawing through a shader asset. Each
change draws the picture anew and destroyed the one before it, but
the mesh of that object keeps its picture bound until it syncs. The
issue also asks for the button "Add shape" to go: a shape without
points cannot be given any, the Pen draws a new one.
- GeneratedPictures takes two more callbacks. inUse says that a
picture cannot be freed yet, soon runs a retry once whoever asked
is done.
- A replaced picture that is still in use waits in a list of its
own. It is freed right after the redraw that asked, as a rule. On
a later ask where its wearer was not part of that redraw.
- TextureLibrary tells a bound picture by the listeners for change
on its source. Under WebGL the bind groups are the only ones that
listen there. The retry is a microtask.
- The rule is asked for every drawn picture alike, whoever wears it.
- The inspector of a drawing and of a shape has no "Add shape" any
more. "Delete shapes" for several selected shapes stays.
Decided here:
- Under the list of shapes a second note says "The Pen draws a new
shape." while only the asset is selected.
Found on the way:
- Reproduced on a throwaway copy of the project the report came
from: 6 warnings for 3 changes with the shader override on the
object, none without it. After the change none, and no replaced
picture is left waiting.
- The fixture project of the tests never showed the warning. No
object there wore a drawing through a shader.
Tests:
- Gate on melektaus-atx: 211 files, 3219 tests (3209 + 10), exit 0
- e2e 47,48 on melektaus-atx: 113 checks, all pass
- e2e 28,30,31,39,40,47,48: 350 checks, all pass, run before the
wording of the new note changed
- The first gate was red: an existing test read the wording of the
note that had changed. Only three test files had been run after
the change.
- No full run and no smokes. The sum of 1668 (1667 + 1) is reckoned,
1667 is what CI counted for
|
||
|
adminandClaude Opus 5.5
|
345289982b |
Scale, turn and mirror the shapes of a vector drawing (#291)
A shape could only be moved and reshaped point by point. Whoever
wanted it larger or turned pulled every point alone, and for several
shapes or a group there was no way at all. The answers in the issue
settle the rest: the change is baked into the points, nothing of it
is remembered, and the line width stays.
- With Select the selection stands in a frame of eight squares and a
knob, drawn like the one of the scene view. It holds one shape,
several shapes or a group, the same selection that is dragged as
one.
- A corner square scales from the opposite corner, a square on an
edge in its own direction. Shift keeps the proportions, Alt scales
about the middle.
- The knob turns round the middle of the frame, with Shift in steps
of 15 degrees. After the pull the frame stands upright again.
- The inspector has a band TRANSFORM with X, Y, Width, Height and
Rotate by, and the buttons Flip horizontal and Flip vertical.
- Points, handles, gradients and texture tiles are taken through the
same matrix. The rule is a pure function in vectorTransform.ts,
transformShapesCommand makes one undo step of any number of
shapes.
- A press goes to a point or a handle first, then to the frame, then
to a line. shapeFrame.ts holds where the handles are and what a
pull of each means.
Decided here:
- The frame stands 15 pixels off the shapes. The points of a shape
lie on its bounds, so a square on the bounds would cover them.
- The knob only turns. In the scene view it scales as well.
- A side cannot be pulled through the opposite one, the frame keeps
at least 1 pixel.
- Coordinates are rounded to a thousandth of a pixel, so a quarter
turn is exact.
- A texture tile stays upright under a turn and grows to the bounds
of the turned tile. The bands of a gradient stay square to its
axis under an uneven scale.
- The switch Scale stroke of the proposal is not built.
Found on the way:
- The inspector of a shape is now taller than the window. Two checks
of module 47 no longer found their row or button on the screen and
use the new hook inspectorButton, which scrolls there first.
- Not solved: with a shape at the top edge of the view the knob lies
outside the tab. The wiki names it under the limits.
Taken over from #217: the e2e check for two selected shapes without
a group, and unit tests for the snap of the common offset and for
the gradients of the shapes dragged along.
Tests:
- Gate on melektaus-atx: 209 files, 3176 tests (3121 + 55), exit 0
- e2e 47,48 on melektaus-atx: 112 checks, all pass
- No full run and no smokes. The sum of 1664 (1660 + 4) is reckoned,
1660 is what CI counted for
|
||
|
adminandClaude Opus 5.5
|
2ff3a78607 |
Put the shapes of a vector drawing on layers and in groups (#190)
A vector drawing was one flat list of shapes. With many shapes the list got hard to read, and several shapes could not be kept or moved together. Now the shapes stand on layers, as in pixel art, and can be put into groups that nest. - A drawing has layers, each with a name and an eye. A hidden layer is neither in the tab nor in the picture a sprite wears, and its shapes cannot be pressed. One layer is the one worked on: the pen and Add shape draw onto it, and SHAPES lists what is on it. - The inspector has a list LAYERS over the shapes. Its plus adds a layer, the cross on a row removes it with all on it, the last one stays. A double-click renames, a drag sorts. - Group (Ctrl+G) puts the selected shapes into a group, Ungroup (Ctrl+Shift+G) takes it away. A group stands over its rows in the list, the rows one step in, and a row is dragged into a group or out of it. - In the tab a press on a shape takes its outermost group, and a drag moves the group as one undo step. - The model has layers with a tree of shapes and groups instead of a flat shapes array. The rules are pure functions in core/model/vectorTree.ts. A drawing saved before opens with all its shapes on one layer. - SortableList takes rows with a depth and drops into a tree. The flat lists of tilemap and pixel art run as before. Decided here: - A group has no transformation of its own and cannot be hidden or locked. Rotating and scaling is the follow-up #291. - A group is never empty: the one that loses its last shape goes with it. - Several selected shapes are dragged together, grouped or not, and a click on a shape of the selection keeps the selection. This is what #217 asked for. - Shift+click selects like Ctrl+click. With Select, Shift pans only beside the shapes, as in the scene view. The middle button pans anywhere, and with the pen and Paint Shift pans as before. - A row of the list picks one shape of a group alone. - Shapes change their layer through a row Layer in the inspector, which is there from two layers on. Rows are not dragged between layers. - A group cannot span two layers, the button is off then. - The pen does not draw onto a hidden layer, the hint says so. - Groups are always shown unfolded. - The four order buttons work inside the own group or layer. Tests: - Gate: 204 files, 3067 tests (3008 + 59), exit 0 - e2e 47,48: 108 checks. e2e 39,40,47,48 before the Shift change: 209 checks. No full run, the sum of 1645 (1639 + 6) is reckoned and CI measures it. - 59 unit tests: 36 in tests/core/vector-tree.test.ts, 23 in tests/editor/vector-layers.test.ts - Six e2e checks with a real mouse in block 47j - 47 unit counter-probes for layers and groups and three for the Shift click all fail tests, run on stein2 - Three browser counter-probes fail their checks - Two screenshots looked at (group in the list, hidden layer) - Only unit tested: the row Layer, sorting and removing layers, copying a group, the Shift pan beside the shapes Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> |
||
|
adminandClaude Opus 5.5
|
0f85476b93 |
Add points by double-click and delete the picked one (#288)
Four editors edit points, and all of them put a point down on a single press on the line and took one away on a double-click. A stray click added a point, and there was no way to see which point a key would hit. All four now work the same way: the Curve tab, the Vector art tab, a polygon collider in the scene view and a frame's collision outline in the Texture tab. - A double-click on a line, edge or segment puts a point there, in the Curve tab on free space too. The point is picked and stays in place. It can be dragged with the next press, as answered in the issue. - A click on a point picks it, and it is drawn filled. A double-click on a point takes nothing away any more. - Delete or Backspace takes the picked point away. Without a picked point the key removes the shape, the object or the outline as before. - A right-click on a point picks it and opens a menu with Delete point. In the Curve and Vector art tab the four point types stand below it. Alt-click stays. - A polygon keeps three corners and a curve keeps its ends. The entry is greyed out then. - The pick ends with a click beside the points, with another object, shape or frame, and after the point is gone. - editor/pointGestures.ts holds the rule as a pure function, and editor/pointMenu.ts builds the menu for all four. Decided here: - A single click on a line no longer adds anything. In Vector art it drags the shape, on a polygon it drops the pick, and in the Texture tab it makes that outline the active one and drops the pick. - In the Texture tab a click inside the frame still appends a corner, and that corner is picked. Delete takes the last corner first. To remove the whole outline, click one of its edges before. - The point the Pen put down last is picked, so Delete takes it and not the shape. - Delete hits the picked point also when the tab has lost the keyboard focus, after a click in the shape list or after the menu. - A vector shape that loses its last point is removed whole. Before, an empty shape stayed in the list. Findings: - Fixed: the new hint line in the Texture tab was cut off at the edge. The shorter text was not looked at in a picture again. - Not fixed: in the scene view the collider's name label covers a corner that sits near the centre. That was so before. Tests: - Gate: 200 files, 2967 tests (2944 + 23), exit 0 - e2e, full run: 1629 checks passed (1625 + 4), exit 0 - Smokes: 24 / 19 / 21, exit 0 - After the full run an unused parameter and a comment were tidied. For that final state the gate and e2e 42,47,53 (105 checks) ran again, the full run did not. - 23 unit tests in tests/editor/point-gestures.test.ts, for the rule and for each of the four editors - Four e2e checks with a real mouse, two in module 42 and one each in 47 and 53. The existing checks for adding and removing a point use the new gestures. - 20 unit counter-probes all fail tests, run on stein2 - Two browser counter-probes fail, the build went through both times. Without the Delete wiring the key removes the collider. Without the right-click hook the menu is missing, and that run stops in module 42, so 47 and 53 were not reached with it. - Three screenshots looked at, the picked point is filled. None of the Vector art tab. Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> |
||
|
adminandClaude Opus 5.5
|
14972d057f |
Refactoring round 8: hide data files, safe saves, Esc as Cancel (#85)
Recurring cleanup round over the code since round 7 (
|
||
|
adminandClaude Opus 5.5
|
a5ae21481b |
Type point values, snap and scrub the preview in the curve tab (#248)
Building a curve by mouse alone was fiddly: there was no way to put a point on an exact value, no grid, and the running preview could not be stopped at a chosen moment. The hand cursor over points also looked like a link instead of a drawing tool. - Number fields t and v in the header show the selected point. Typing or dragging on them goes through the same rules as a mouse drag, so points never overtake and handles stay clamped. One undo step each. t is greyed out on the two end points. - The magnet button from Vector art snaps points and handles to a 0.05 grid in t and v, when placing on free space and when dragging. - Points and handles keep the default arrow in the curve tab and in Vector art. The pixel art palette dropped pointer as well, which is beyond the issue. Collider corners never had it. - The preview now starts off. A vertical time line with a knob under the t axis sets t when dragged sideways. Dragging the dot on the rail jumps to the first t where the curve reaches that value, or to the closest one if it never does. - The rules are pure functions in curveView.ts (withCurvePointSet, snappedToGrid, shareAtValue, previewSecondsAt), the canvas only calls them. Tests: - ./check.sh: 180 files, 2616 tests, CHECK EXIT 0 - GM_STEPS=1,47,53: ALL PASSED, 87 checks - 4 new unit tests in curve-view.test.ts, 4 new e2e checks in 53 (53h-53k) and 1 in 47, all with real mouse and keyboard - Counter-probes bite: without "first t" 1 unit test fails, with pointer, no snap, no field commit, no scrub or preview on 5 browser checks fail, pointer in Vector art fails the new 47 check Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> |
||
|
adminandClaude Opus 5.5
|
0e8585665a |
Load the 500 weight and draw missing glyphs as SVG icons (#214)
The theme asks for Source Sans 3 at weight 500, but fonts.ts only
loaded 400, 600 and 700. The browser synthesised the 500 text. The
issue comment also asked for the symbols the font lacks to become SVG
icons. A scan of src/ against the font's cmap found 20 such characters
in 30 places.
- fonts.ts loads source-sans-3-latin-500-normal.woff2 as well.
- Menus draw their ticks and the "current" dot as icons. The dot is a
new MenuItem.current field and no longer part of the label text.
- Inspector action buttons (reset, apply, fit width/height) are
icons. The menu arrow behind them is the drawn Dropdown chevron.
- Kind marks come from a table in markIcons.ts. Picture kinds use an
icon, # and Aa stay text because the font has them.
- Scene marks in the asset panel, sound play/stop and the transition
arrows are icons too.
- Apply is an icon although the font has the arrow. It sits next to
the reset icon and would look different as a glyph.
- A new Icon widget draws on redraw like Button, so Node tests need no
DOMParser.
- Tests find icons through the SVG id. The new hook
__gm.locateIcons(id) and the harness helpers findIcon/clickIcon
replace locate() on the old characters.
Findings:
- Weight 700 is loaded but the theme never uses it. Left as is.
- The old scene-mark check in module 35 accepted any play glyph on
screen. It now checks the mark on the start scene's row.
- Module 44 needs the textures from module 37 and fails without it.
Tests:
- ./check.sh: 145 files, 2187 tests, exit 0 (before 144 / 2143).
- New tests/ui/fonts.test.ts: every theme weight is loaded, and every
character in src/ exists in every shipped face. The cmap reader
matches fontTools (231 characters).
- Icon tests cover the 19 new files. Each kind mark is either an
icon or text, never both.
- e2e 1-16,22,30,34,35,43,44: 586 green, 0 FAIL, then 44 stopped
for lack of module 37. e2e 1-16,37,44,47,48: 618 green.
e2e 1-14 on the final build: 454 green.
- Two new e2e checks: loaded weights in 14, a reset icon pixel in 04.
- Counter-probes all fail as expected: 500 removed, a play glyph put
back, the struct icon removed (one unit test each). In the browser,
500 removed and reset icon hidden fail exactly the two new checks.
- Editor-suite check sum 1312 (1310 measured by CI at
|
||
|
adminandClaude Opus 5.5
|
056a622524 |
Refactoring round 6: shared sheet canvas, fewer copies (#85)
Recurring cleanup round. Behaviour is unchanged. Duplicated code in
src went from 27 clones with 299 lines to 6 clones with 56 lines
(jscpd, the two identical OFL licence texts not counted).
- SheetCanvas is the new base of the texture, pixel art and vector art
canvases. It holds background, mask, hint, panning, wheel zoom, fit,
view save and restore and the screen mapping. Pixel art keeps its
whole-pixel panning and fixed zoom steps.
- mixColor in src/core/util/color.ts replaces three copies in
animation, gradient and particles. It clamps t like the particle one.
- fingerprint now lives once in generated.ts, next to the revision
contract from #185.
- MoveCommand next to RenameCommand is the base of the three reorder
commands for tile pictures, tilemap layers and vector shapes.
- The two raycast nodes share inputs, settings and filter via rayOf.
- canvasRect() lives once in AssetTabEditor.
- Removed unused code: findPixelArt, isDrawableShape,
GeneratedPictures.has and SnapToggle.snapping. Tests now check the
same things through equivalent paths.
- 38 values used only in their own file lost their export.
- Three comments that told history now describe the current state.
The bundle stayed md5-identical for those edits.
- README lists vector art, pixel art and palette, and links the two
wiki pages.
Findings:
- PaintTilesCommand.changes is meant to prevent empty undo steps but
has not been called since #128. The rectangle tool therefore records
a no-op undo step when it paints the same tile over itself. Left as
is, because fixing it changes behaviour.
- No test covered middle-click panning in any sheet tab before. 13f
and 48a now check it.
- The default values of the ray inputs were untested. Length 1000
could become 10 without a red test. tests/core/raycast.test.ts now
covers it.
- CI measured 1308 editor checks at
|
||
|
adminandClaude Opus 5
|
6e3e8d23c5 |
Combining vector shapes keeps the curves it did not cut (#208)
Until now every boolean operation on vector art threw the curves away. The shapes were flattened into line segments, the operation ran on those segments, and the result came back as a polygon. A circle that nothing even touched came out of an Exclude with 40 corners instead of its four points and handles. Now the result carries the original curves again, and only the edges the operation really drew stay straight. - While flattening, every sample point remembers which curve it came from and where on that curve it sits. The operation runs on the same segments as before, so nothing about the boolean result changes. - When a run of result points walks along one of those curves, that piece is cut out of the original curve again with de Casteljau. This is an exact cut, not a fit through the points. - An edge whose two ends sit on the same curve but whose middle does not follow it stays straight. Without that rule a cut-off cap would bulge back into the shape. - A closed contour keeps at least three points, so a lens shape does not collapse into two. - The rule lives in its own module, src/core/model/vectorCurves.ts. vectorBoolean.ts only hands it the table of sampled points. Findings: - The two intersection points themselves sit up to 0.09 canvas pixels off the original curve. Clipper cuts the flattened segments, not the curves, so this was the case before as well and stays inside the 0.2 px sampling tolerance. - Refining those points with Newton steps on the curve was measured and gave nothing back (0.02952 px instead of 0.02978 px), because the error is in the intersection itself and not in the estimate. The code was removed again. - Theme.ts rowHeight 22 -> 24 is in this commit. The change is not mine, it was already in the working tree; gate and module 47 are green with it. Tests: - ./check.sh: 143 files, 2133 tests, exit 0 (was 2127) - e2e module 47 on a fresh seed: all passed, 59 checks (was 57) - 6 new unit tests: untouched circle, untouched side plus a straight cut edge, a cut in the middle of a curve, a chord crossing one curve twice, two overlapping circles, the three point minimum - 2 new e2e checks in block 47p: point count and handles from the model, plus a pixel pair on the round edge - Four counter-proofs, all bite: no reconstruction -> 5 unit tests and the e2e check fail with 35 points and nothing curved; no chord test -> the cap bulges back to 28.28; no three point rule -> the lens test fails; handles halved -> the pixel check reads background Co-Authored-By: Claude Opus 5 <noreply@anthropic.com> |
||
|
adminandClaude Opus 5
|
bbbf34109b |
Lists duplicate, rename and edit values right in their rows
Name, opacity and Z each sat in a separate field below or beside
the list. You had to select a row first and then look elsewhere to
change it. Duplicating was a separate button or not possible at all.
Now the row itself carries everything.
- SortableList gets three optional callbacks. onDuplicate shows a
copy button between the eye and the delete button. onRename opens
a text field on double click, Enter or a click outside commits,
Esc cancels, an empty name is ignored. value puts a NumberField
into the row.
- Dragging on the number changes the value and never moves the row.
A whole drag is one undo step, the canvas follows live.
- Copy and delete only show on the hovered and the selected row.
Their space stays reserved, so nothing jumps on hover.
- Pixel layers: copy right above with the same pixels on all
frames, rename, opacity in percent. The Name and Opacity fields
below the list are gone.
- Pixel frames: copy right after, replaces the Duplicate button.
- Tilemap layers: copy with cells, Z and visibility, rename, Z in
the row. The Name and Z fields in the panel are gone.
- Vector shapes: copy at the same place and select it, rename.
- New in core: DuplicateVectorShapeCommand,
DuplicateTilemapLayerCommand, withLayerDuplicated and copyName
("X copy", "X copy 2"). copyName lives in src/core/util/names.ts
because the model never imports from commands/.
Findings:
- Double clicking a shape that is not selected yet only selects it.
The first click moves the list up, so the second click misses the
name. Module 47 selects the row first.
Tests:
- ./check.sh: 138 files, 2055 tests, CHECK EXIT 0 (before 2052).
- GM_STEPS=47,48 (fresh, twice): ALL PASSED, 91 checks (before 86).
- GM_STEPS=39,40,47,48: module 40 green, 47 died on the rename
check, which was a test fault and is fixed.
- Counter probes: a constant copyName fails the shape and pixel
layer tests. A dead copy hit fails the copy check in 47.
- Check total 1272 in README and wiki, computed (1266 + 6).
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
|
||
|
adminandClaude Opus 5
|
ae0247d86f |
Lists add and delete items right in the list header and rows
The layer, frame and shape lists still had their add and delete buttons scattered below the list, each in its own layout. They now live in the shared SortableList, so every list works the same way. - SortableList gets an optional header with the title on the left and a + on the right, plus an optional x per row next to the eye. - The keepOne option hides the x on the last remaining row, so a pixel art image and a tilemap always keep one layer. - Pixel art layers and frames and tilemap layers use header, + and x. Only Merge down and Duplicate stay below the lists. - Vector art shapes get the x but no +. Add shape stays below the list and Delete shapes stays for a multi-selection. - The section headings in the pixel art column use the same style as the list titles and the inspector. Findings: - The wait loop added to check 47i for #196 only waited for the right half of the shape. If the texture landed between the two reads, the left half was still blue and the check failed. It now waits for both halves. Tests: - ./check.sh: 138 files, 2052 tests, exit 0. - GM_STEPS=39,40,47,48 (fresh): ALL PASSED, 156 checks (was 154). - GM_STEPS=47,48 (fresh, final): ALL PASSED, 86 checks. - Two new e2e checks: x on a shape (47) and x on a frame (48). The tilemap check in 40 now uses the x instead of Delete layer. - Counter-check: with the x not reporting to its owner, exactly the two new checks fail. - Check total 1266 in README and wiki is computed (1264 + 2). Co-Authored-By: Claude Opus 5 <noreply@anthropic.com> |
||
|
adminandClaude Opus 5
|
6a2b06dd4b |
Texture fills show in the vector tab as soon as they load (#196)
After signing out and back in, a texture fill stayed in its base colour until something else redrew the vector tab. The texture library is a singleton that outlives the editor. Four widgets subscribed to it and never unsubscribed. After a new sign-in the first loaded texture called a destroyed canvas, which threw and stopped the loop before the vector tab heard about the image. - TextureCanvas, TileCanvas, ShaderPreview and WorldViewport now unsubscribe in destroy(). This is the pattern FontPreview and VectorArtCanvas already use. WorldViewport leaves both the texture and the font library. - FileLibrary.notifyChange catches errors per listener. A broken listener no longer starves the others. The error is still logged as "[textures] a listener failed". - e2e 47i no longer forces a redraw. It waits up to 3 s for the tab to show the texture on its own. Findings: - The trigger was e2e module 45 (sign out, sign in), not the texture fill. My note in #196 that the browser showed no exception was wrong. The counter-check shows it clearly. Tests: - ./check.sh: 137 files, 2051 tests, exit 0 (before 136 / 2049) - 2 new unit tests in tests/viewport/file-library.test.ts - GM_STEPS=45,47 after a fresh seed: ALL PASSED, 71 checks - Counter-check with the old source and the new check: 1 FAIL (shape stays #0000ff) plus the TypeError. Old FileLibrary.ts fails the first unit test. - No full e2e run locally. The check count is unchanged. Co-Authored-By: Claude Opus 5 <noreply@anthropic.com> |
||
|
adminandClaude Opus 5
|
1c8a20fcac |
Texture fill e2e checks pick the right image in a full run (#186)
CI run 217 for
|
||
|
adminandClaude Opus 5
|
592ea942d9 |
Vector shapes can fill with gradients and textures (#186)
A vector shape could only be filled and outlined with one flat colour. Shading, glows and patterned surfaces had to be faked with stacks of shapes. Every shape now has a paint type for its fill and its outline. - Fill type: solid colour, linear gradient, radial gradient or texture. Line type offers the same without texture. - Colour stops are edited on a bar in the inspector, as agreed in the issue. A click on the bar adds a stop in the colour the gradient already has there, so adding never changes the picture. At least two stops remain. - The new Paint tool in the tab shows two handles for the selected shape: axis start and end, centre and radius, or the corners of one texture tile. "Handles: Fill / Outline" picks which paint is edited. - Moving a whole shape moves its gradients and tile with it. Every gesture is one undo step. - A texture fill always tiles, because Pixi turns a non-repeating pattern into a repeating one anyway. When switched on, one tile covers the whole shape. - Only uploaded textures and frames can be a fill, never a drawing. A drawing filled with itself would rasterise itself mid-raster. - The fingerprint of a drawing includes the texture and frame a fill points to, so the picture redraws when the image is swapped. Findings: - graphics.destroy(true) also destroyed the textures of the fills. With a texture fill it deleted the tile slice and the next redraw crashed on reading 'scaleMode' of null. It is now destroy(). - The gradient cache destroyed old gradients itself, which gave 20 Pixi warnings "destroyed while still bound". They are now handed to Pixi's texture GC with autoGarbageCollect switched on. The console of module 47 is empty again, the last CI log had 0 of them. Tests: - ./check.sh: 135 files, 2011 tests, exit 0 (before 134 / 1986) - npm run build: exit 0 - GM_STEPS=47, freshly seeded: ALL PASSED, 54 checks (before 44), 0 console warnings - 25 new unit tests, 10 new e2e checks in block 47i - Four counter-checks bite, originals restored and verified with cmp - Check sum 1232 in README and wiki, calculated (1222 + 10) Co-Authored-By: Claude Opus 5 <noreply@anthropic.com> |
||
|
adminandClaude Opus 5
|
1116818011 |
Vector shapes can be combined by union, subtract and more (#187)
Building a shape out of simpler ones meant drawing the result point by point. The Vector Art tab now selects several shapes at once and combines them with a boolean operation into one ordinary shape. - Ctrl/Cmd+click in the tab and Ctrl or Shift+click in the shape list add a shape to the selection. Shift stays pan in the canvas. - A COMBINE block in the inspector offers Union, Subtract, Intersect and Exclude. Subtract removes every upper shape from the lowest one. - The result replaces the lowest selected shape and keeps its name, colours, stroke and place in the order. It is one undo step. - Curves are flattened to 0.2 canvas pixels, a circle gets about 48 points. Open lines and single shapes cannot be combined, the buttons are off and a hint gives the reason. An empty result is rejected. - Delete now removes every selected shape, and the selection drops shapes that no longer exist. - The geometry comes from clipper2-ts 2.0.1, pinned. It has no dependencies and speaks even-odd directly. Only the engine module is imported, the bundle grows by 55 kB instead of 110 kB. Findings: - clipper2-js was tried and dropped. It pulls in Angular 15 with a high npm audit finding and no fix. - Pixi finds holes by containment, not by even-odd depth. An island inside a hole would be drawn as a hole again. Result rings are emitted outer ring before its islands, and a test mirrors Pixi's rule. - A depth sort turned out to be dead code in a counter-check and was removed. A pixel check in 47h stayed green without the subtract and now checks both colours. Tests: - ./check.sh: 134 files, 1986 tests, exit 0 (before 133 / 1968) - npm run build: exit 0 - GM_STEPS=47, freshly seeded: ALL PASSED, 44 checks (before 39) - 18 new unit tests, 5 new e2e checks in block 47h - Five counter-checks bite, originals restored and verified with cmp - Check sum 1222 in README and wiki, calculated (1217 + 5) Co-Authored-By: Claude Opus 5 <noreply@anthropic.com> |
||
|
adminandClaude Opus 5
|
3ff7e91dbf |
Vector art points have four types and the pen draws whole curves (#195)
The pen only pulled out the outgoing handle of a new point, because the opposite handle was mirrored only if it already existed. The first segment of every dragged point was therefore half a curve. Beyond that bug, a point had no way to say how its handles relate. - A vector point has an optional mode: straight, corner, smooth or symmetric. Missing means corner. The mode is not part of the fingerprint, because it changes no pixel, only the next drag. - Dragging a handle follows the mode. Corner leaves the other handle alone, smooth turns it along and keeps its length, symmetric mirrors it exactly. - The pen pulls out both handles mirrored and marks the point symmetric. A plain click still sets a point without handles. - The tab header has a "Point: ..." menu for the last clicked or set point. That point is drawn filled. Changing its type is one undo step. Text instead of four icons, because the UI kit has no tooltips. - Switching a point without handles to a curved type first grows handles along its neighbours. Smooth and symmetric line the handles up and keep the rough direction of the curve. - A point inserted on a curve is smooth. Symmetric neighbours become smooth, because the split shortens one of their handles. - Alt-click still toggles between straight and symmetric. Found on the way: the old Alt rounding took the point at the other end of an open line as a neighbour, so its handles came out skewed. Fixed and held by a unit test. Existing points with handles now count as corner. Before, every drag mirrored. No pixel changes, only the next drag behaves differently. Tests: - ./check.sh: 129 files, 1917 tests, exit 0 (before 1903) - GM_STEPS=47, freshly seeded: ALL PASSED, 39 checks (before 32) - Check sum 1195 in README and wiki is computed (1188 + 7), CI measures it - Counter-checks: pen without 'symmetric' fails 3 checks, no smooth branch fails 1 unit test and 1 e2e check Co-Authored-By: Claude Opus 5 <noreply@anthropic.com> |
||
|
adminandClaude Opus 5
|
90627ccf47 |
Snap is a magnet button in every graph and vector art tab (#194)
The snap toggle was a checkbox with the word "Snap" next to Fit, and the vector art tab had its own "Grid" button for the same idea. Both now share one square icon button, so snapping looks and works the same wherever it exists. - SnapToggle is a square toggle button with a magnet icon and no text. It lights up blue when snapping is on, like the other toggle buttons. - The magnet is drawn with cubic curves instead of arcs, because the Pixi SVG parser draws arcs as jagged edges. - The vector art tab drops its Grid button and uses the same SnapToggle. It still snaps to 8 px, the graph tabs to 24 px. - SnapToggle accepts anything with setSnapping(on). The vector art canvas method is renamed from setSnap to setSnapping for that. - Every tab exposes the button as __gm.<tab>.snapButton(). Modules 06, 26 and 36 click through that hook instead of the label "Snap" plus 30 px. Tests: - ./check.sh: 129 files, 1903 tests (was 128 / 1897) - 3 new tests in tests/editor/snap-toggle.test.ts, 3 in the icon tests - GM_STEPS=1-6,26,36,47 fresh: ALL PASSED, 346 checks - GM_STEPS=47: ALL PASSED, 32 checks (was 29) - Counter-checks: toggle not switching its target fails 2 unit tests, the canvas ignoring the switch fails module 47 - Check total 1188 in README and wiki is computed (1184 + 4), the full run is left to CI Co-Authored-By: Claude Opus 5 <noreply@anthropic.com> |
||
|
adminandClaude Opus 5
|
ad62a0f525 |
A vector art asset can be made and used without touching the model (#129)
Stage 5 closes the loop that the earlier stages left open: every check so far put the shapes into the project with mutate, because the tab that draws them came later. Block 47f now walks the path a user walks - the + menu, the asset panel, the tab, the picture picker - so a regression in any of those four doors is caught by the suite instead of by you. - The + menu offers "Vector art" among the types that only live in the library, and the entry makes an asset that is selected and stands in the panel under its own heading. - A double-click on the row opens the Vector art tab on that asset, which is what stage 3 built and no check measured until now. - The Texture row of a sprite offers the drawing by name, sorted among the other pictures, and picking it there makes the sprite wear it - measured at the pixel in the scene, not at the row. One finding: the picker listed three entries where I expected more, and the reason is sound - a fresh fixture holds one texture and the drawing, "None" being the third. The check names all three instead of counting, so a lost entry says which one it lost. Tests: ./check.sh 128 files, 1897 tests, exit 0 node tools/e2e.mjs (all modules) ALL PASSED - 1184 checks (was 1179) GM_STEPS=47 (fresh seed) ALL PASSED - 29 checks (was 24) Counter-checks: both hold - no generator registered fails the picker check, and opening the tab without the asset fails the double-click check. Co-Authored-By: Claude Opus 5 <noreply@anthropic.com> |
||
|
adminandClaude Opus 5
|
78595ec80f |
A selected vector shape has its own inspector rows (#129)
Stage 4 of #129. Until now the inspector showed the rows of the asset when a shape was selected, so there was no way to give a shape a colour, an outline or a place in the drawing order without editing the project file. The rows for a shape now sit where every other selection puts its rows. - SHAPES lists every shape of the asset, topmost row drawn last, the same way a layer list reads. Selecting the asset itself shows the same list below its own rows, with no shape selected. - Each row paints its shape with the commands the rasterizer uses (shapeDrawing plus paintDrawing) into a 22 px swatch, the whole canvas scaled in, so the row also says where on the canvas the shape sits. - The four order buttons from the issue (forward, to front, backward, to back) sit in two rows of two, and a row can be dragged to another place with a marker line. They are disabled when there is nothing to move. - VECTOR SHAPE carries name, fill, opacity and an outline checkbox, the checkbox adding and removing the stroke instead of hiding it; line colour and width appear with it. A dragged colour slider is one undo step, the style rows going through previewingHandlers like every other row. - A line width of 0 is no stroke, which the command rejects, so the row clamps at 0.1. Findings: - locate('Outline') aims beside the control, because it gives the centre of the label text and a wider label pushes a fixed offset out of the field. __gm.inspectorField(label) knows the centre of the control. - A click into a text field sets the cursor and selects nothing, so a typed hex landed appended to the old one and parseHex returned null without anything failing - typeText only checks that the text is contained. A Ctrl+A goes first now. - Four buttons side by side cut "Backward" to "Backw...", which only the screenshot showed. Two rows of two now, as in the tilemap panel. Tests: ./check.sh 128 files, 1897 tests (was 127/1883). Full e2e suite locally instead of only CI because the change sits in the inspector and touches every selection: ALL PASSED - 1179 checks (was 1172), module 47 at 24 checks (was 17). Three counter-checks hold: not reversing the list fails 1 unit test and 2 e2e checks, dropping the gap correction when dropping a row fails 2 unit tests and the drag check, and a constant signature kills module 47 because the outline rows never appear. Co-Authored-By: Claude Opus 5 <noreply@anthropic.com> |
||
|
admin
|
3d7ad65f34 |
Vector art has a tab to draw in, which is stage 3 of #129
Stages 1 and 2 gave the asset a model and a picture, but the only way to put a shape into it was a test calling mutate. The tab closes that gap: what you draw there is what the sprite in the scene carries, with no extra step, because the fingerprint changes and the picture registry of #185 redraws. - The tab has a header with Select, Pen, Grid and Fit, a chequerboard behind the canvas and the canvas itself as a frame. It paints with the same commands as the rasterizer, paintDrawing being exported from viewport/vectorArtPicture.ts for it, so the tab cannot drift away from the picture. - Pen sets points on a click and pulls the handles out on a drag, both of them mirrored; a click on the first point closes the ring and Esc ends an open line. - Select drags a point, a handle or a whole shape, a click on an edge puts a point there, a double click takes one away, and Alt turns a corner round and back. Delete removes the selected shape. - The rules grew inside polygonEdit.ts instead of a second module, as the plan says, so a collider polygon and a frame outline get the same behaviour where it applies. - A point on a curved edge splits the curve by de Casteljau instead of cutting it: both halves together draw exactly what was there before. - A curved edge is walked instead of measured over its chord, or a click on the bow of a curve would grab nothing; the same walk carries the test for the inside of a ring. - One gesture is one undo step. The preview writes the model directly and the old state is put back on release before the command runs, which is the pattern the frame outlines of #141 already use. - state.ts gained a selection kind "shape". The inspector shows the rows of the asset for it, the shape list with colour, opacity and stroke being stage 4. One counter-check was no counter-check: disabling the pen's closing tolerance by multiplying it with 0 left the run green, and rightly so, because the closing click lands on exactly the screen coordinate point 0 came from, so the distance is 0 and <= 0 is true. Only an unsatisfiable condition really switched it off, and then 2 checks fail. A second trap on the way: a false && in front of the guard breaks the TS narrowing, npm run build bails out, and two runs went against the old bundle. Tests: check.sh 127 files, 1878 tests, EXIT 0 (was 126 / 1860). Full e2e suite ALL PASSED - 1172 checks, module 47 alone 17 (was 10). 18 new unit tests in tests/editor/ring-edit.test.ts and 7 new e2e checks in blocks 47c and 47d. Two counter-checks hold: no de Casteljau fails 1 unit test, measuring a curve over its chord fails another. Originals checked back with cmp and rebuilt. |
||
|
adminandClaude Opus 5
|
6371576d37 |
A vector art asset is a picture now, which is stage 2 of #129 and the first stage that shows something in the browser: the asset sits in the picture picker, a sprite carries it in its Texture row and what the sprite shows has been rasterized from the shapes, the generator of #185 being registered for the type vectorart - installVectorArtPictures(app.renderer) hooks the source (core) and the generator (viewport) in once per page from App.ts, by a call and not by a module side effect, so a test may install it or leave it out; the rule lives in core and the painting in viewport - the new core/model/vectorPath.ts turns a shape into plain drawing commands (move/line/curve/close), closed rings being filled while all rings are stroked, a segment staying a line as long as neither of its ends carries a handle - a single handle is enough for a curve, the missing control point sitting on its own end, so a corner may stand next to a round side - and the way back to the first point is only drawn when it is curved, close doing it otherwise; holes go through one door only, Pixi recognising them from a GraphicsPath with checkForHoles, which tests containment rather than even-odd depth, which is enough for a ring inside a ring while without the flag the inner ring simply paints over the outer one (measured, see the counter-checks); the oversampling is the 2x from the plan - RenderTexture.create({resolution: 2}) puts 512 px on the GPU for a 256 canvas while texture.width stays the canvas size, which is the measure the sprite hangs on, and the render texture is the clip itself, so what juts out over the canvas is not in it and needs no mask; drawn pictures get the same sampler state as uploaded ones, setPictureFactory wrapping the factory for it, mirroring keep(); two measuring traps cost me runs - __gm.objectRect(id) gives the centre of the object and not its corner, so the first pass read four pixels next to the sprite and reported background while the rasterizer was correct, and the grid lines of the scene cross exactly in the centre point, so the hole check read #363940 and failed for the right reason, measuring beside it now; renderer.render() runs inside the picture request, which is safe here because every caller asks during its own widget redraw and the frame is drawn on the ticker afterwards, a nested render inside a running render pass would not be - that warning stands in the module head and in the notes; new module 47 with 8 own checks in its own lane (the picture on the GPU at double resolution measuring the canvas, the sprite showing the fill, the inner ring being a hole with the scene shining through, the later shape on top, the stroke running along the ring, a changed drawing getting a new key with the old one freed, and the sprite showing the new colour), the shapes being put into the model by mutate because the tab that draws them is stage 3, and 21 new unit tests in tests/core/vector-path.test.ts; three counter-checks hold: oversampling back to 1 fails the GPU check, checkForHoles off fails the hole check, and not drawing the curved way back fails a unit test; the full suite ran locally instead of only in CI because the change sits in TextureLibrary and touches every picture: ALL PASSED - 1165 checks, measured and carried into README and the wiki (#129)
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com> |