adminandClaude Opus 5
60d0146bde
The topbar is icons only: the leading Project dropdown, the Scene picker and the labelled Play/Pause buttons are gone and in their place stand five icon buttons - menu, undo, redo on the left, play and pause in the middle - while Notice, the save state, fps and the Account menu keep the right side; the Play button swaps its icon for a stop square while the project runs and Pause swaps for a second play sign while it is held (Button.setIcon()), and iconSpace() drops the gap between icon and label when a button has no label, which is what kept a 24 px icon button 3 px off its own centre; the menu carries New project, Open project..., a separator and Project settings..., where the picker (src/editor/OpenProjectDialog.ts) preselects the open project and marks it "open", opens on a double click and puts Delete on the left of Cancel and Open - it closes itself before it asks whether to delete, because two modals on top of each other would have left the question standing over a list it no longer speaks about - and the settings dialog (src/editor/ProjectSettingsDialog.ts) holds the name, the "Play starts" switch (Start scene / Active scene, a preference of this browser and so no command) and the collision layers from #152, which retires CollisionLayersDialog.ts and the "Collision layers..." entry; what Apply actually writes is the pure function settingsChanges(), so renaming and the layers are each their own undo step and each drop out when nothing differs; the Scene dropdown falls away without replacement, the active scene is switched by double clicking it in the Assets panel, which is the way that was there anyway; new module 46 runs last with 9 checks (no label left in the bar, the run buttons in edit mode, the four menu entries, the picker with the open project preselected, Cancel leaving the project standing, the settings dialog on the state of the project, renaming with undo and redo through the icon buttons) and it neither opens nor deletes a project, because that would pull the project out from under every earlier module; modules 8, 18 and 35 and the harness follow the new bar, 6 unit tests cover settingsChanges and 3 the icons (#183)
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
2026-09-20 16:34:14 +02:00
..
Asset panel grouped by kind with icons: assets are listed under a header per kind (Sprites, Behaviors, ...) with the count on the right, empty groups are not shown, every group starts folded when a project is opened, a click on the header folds and unfolds it, selecting an asset elsewhere unfolds its group and folding the group of the selected asset clears the selection; every asset kind has an SVG icon in src/editor/panels/icons/ drawn before the name, the pure rule for grouping and sorting lives in assetGroups.ts; the same icons replace the kind word in document tabs and the overflow menu (a list icon for the List tab, which also fixes the close x lying over the end of the active tab's text), stand before every entry of the + menu (Button got an icon option) and on the right of scene object rows instead of the type name; the colour swatch next to sprite names is gone from both panels; the SVG loader moved to src/ui/svg.ts for both icon sets; test hook assetRow unfolds the group and scrolls to the row, assetRowShown only reads, new hook menuIcons; e2e 4g and 4h, 14 and 44a check the icons (#176)
2026-09-19 18:36:20 +02:00
Open asset greyed out and real tab cards: Open asset in the scene object menu is only pickable for kinds with an editor of their own, the table of which asset opens which tab moved from Editor.ts into the new module assetTabs.ts with hasAssetEditor so the menu and the editor read the same list, Select asset stays as it was; tabs are drawn as index cards (new module TabButton.ts): the one showing is a light grey card instead of the aggressive blue, rounded above and square below, its name in plain weight and measured bold so it never clips itself, and a mouse down on the tab already showing keeps its colour; the padding left and right grew to 6 px in one place for both kinds of tab, Scene and Game carry an icon too (the scene one from the asset panel, a new game.svg play sign), Plugins and a plugin's own tab have none; new test hook menuEnabled next to menuRows and menuIcons, e2e 01 checks the greyed out entry on a sprite row, 14a-ii the card and the icons of the fixed tabs, 44a the icon at the wider padding (#176)
2026-09-20 11:40:01 +02:00
2026-09-16 08:08:10 +02:00
2026-09-16 08:08:10 +02:00
Asset panel grouped by kind with icons: assets are listed under a header per kind (Sprites, Behaviors, ...) with the count on the right, empty groups are not shown, every group starts folded when a project is opened, a click on the header folds and unfolds it, selecting an asset elsewhere unfolds its group and folding the group of the selected asset clears the selection; every asset kind has an SVG icon in src/editor/panels/icons/ drawn before the name, the pure rule for grouping and sorting lives in assetGroups.ts; the same icons replace the kind word in document tabs and the overflow menu (a list icon for the List tab, which also fixes the close x lying over the end of the active tab's text), stand before every entry of the + menu (Button got an icon option) and on the right of scene object rows instead of the type name; the colour swatch next to sprite names is gone from both panels; the SVG loader moved to src/ui/svg.ts for both icon sets; test hook assetRow unfolds the group and scrolls to the row, assetRowShown only reads, new hook menuIcons; e2e 4g and 4h, 14 and 44a check the icons (#176)
2026-09-19 18:36:20 +02:00
Scene view symbols come from SVG files: the behavior, container, rigidbody, camera and particles icons live in src/viewport/icons/ and are changed by editing the file and running npm run build; they are bundled, parsed once and drawn into a Graphics by the new module symbolIcons.ts, currentColor becomes the theme color of the symbol, the origin sits in the middle with a centered viewBox and the same units as before, so the symbols are pixel for pixel unchanged; what depends on the object (camera frame, collider outline, one-way cone) stays in code; unit tests keep the files to what Pixi's SVG parser and a browser draw alike (no transform, no polygon, fill always given), e2e 5c reads the five symbols in the theme color (#175)
2026-09-19 17:07:56 +02:00
Tabs are open documents: Scene, Game and Plugins stay as fixed tabs, every other asset opens in its own tab (double click or Enter in the asset panel, on creation, from the list button), several assets of one kind can be open at once, a tab is labelled with its kind dimmed before the name, cut at 160 px and renamed with its asset, closes with its x or a middle click and goes away when its asset is deleted; a tab always shows its own document instead of following the selection, the picker in the tab head is gone, zoom and scroll are kept per document for the session and dropped on close, a double click on a call node stays in the same tab with breadcrumbs per tab; one editor per kind is switched between documents, the placement rules live in the pure module documents.ts, and the test hook showTab stays as a compatibility path; new e2e module 44 documents (#171)
2026-09-19 15:49:54 +02:00
2026-09-16 08:08:10 +02:00
The topbar is icons only: the leading Project dropdown, the Scene picker and the labelled Play/Pause buttons are gone and in their place stand five icon buttons - menu, undo, redo on the left, play and pause in the middle - while Notice, the save state, fps and the Account menu keep the right side; the Play button swaps its icon for a stop square while the project runs and Pause swaps for a second play sign while it is held (Button.setIcon()), and iconSpace() drops the gap between icon and label when a button has no label, which is what kept a 24 px icon button 3 px off its own centre; the menu carries New project, Open project..., a separator and Project settings..., where the picker (src/editor/OpenProjectDialog.ts) preselects the open project and marks it "open", opens on a double click and puts Delete on the left of Cancel and Open - it closes itself before it asks whether to delete, because two modals on top of each other would have left the question standing over a list it no longer speaks about - and the settings dialog (src/editor/ProjectSettingsDialog.ts) holds the name, the "Play starts" switch (Start scene / Active scene, a preference of this browser and so no command) and the collision layers from #152, which retires CollisionLayersDialog.ts and the "Collision layers..." entry; what Apply actually writes is the pure function settingsChanges(), so renaming and the layers are each their own undo step and each drop out when nothing differs; the Scene dropdown falls away without replacement, the active scene is switched by double clicking it in the Assets panel, which is the way that was there anyway; new module 46 runs last with 9 checks (no label left in the bar, the run buttons in edit mode, the four menu entries, the picker with the open project preselected, Cancel leaving the project standing, the settings dialog on the state of the project, renaming with undo and redo through the icon buttons) and it neither opens nor deletes a project, because that would pull the project out from under every earlier module; modules 8, 18 and 35 and the harness follow the new bar, 6 unit tests cover settingsChanges and 3 the icons (#183)
2026-09-20 16:34:14 +02:00
2026-09-16 08:08:10 +02:00
2026-09-16 08:08:10 +02:00
2026-09-16 08:08:10 +02:00
2026-09-18 12:14:01 +02:00
2026-09-16 08:08:10 +02:00
Plugins belong to the project, and they load before it: the project file gained the field plugins: ["demo-plugin.js"] (default empty, no formatVersion bump), the Plugins tab's switch writes into it as an ordinary undo step (SetPluginActiveCommand) instead of into a server-wide plugins.json, and the start order is turned around - startPlugins only fetches the list of files, then editor.boot() runs and ProjectStore.load(id, prepare) hands the raw JSON through before it is deserialized, where pluginsOf(raw) reads the list and PluginManager.syncTo() activates exactly those; that is the point of the issue, because what a plugin registers has to stand there before normalizeGraph would throw it away as unknown (#126, #127), a project switch first stops what the new project does not name and then starts what it does, a file the server does not have is passed over silently, and after signing out the manager is dead so a late event cannot start anything in a torn-down session; on the server plugins.json, PluginStore::setActive, isActive, the route PUT ?r=plugins/{file} and the 403 for inactive modules are gone and GET ?r=plugins only answers {file,bytes,updatedAt}, which makes every plugin file fetchable - the consequence accepted in #117, written down in the wiki for #115 and #116; publishPlugins(root) only copies files now, the seeder switches the demo plugin on in the fixture project, and the Plugins tab carries a puzzle piece as its icon while only a plugin's own tab still goes without one (the knob and the socket are cubic curves, not arcs, which Pixi's parser draws as a spike after an L); 3 new e2e checks in module 38 and 5 new unit tests cover the project as the owner of the switch, its undo, the order, pluginsOf against crude input and an unknown file name (#119)
2026-09-20 14:24:27 +02:00
2026-09-16 08:08:10 +02:00
Tabs are open documents: Scene, Game and Plugins stay as fixed tabs, every other asset opens in its own tab (double click or Enter in the asset panel, on creation, from the list button), several assets of one kind can be open at once, a tab is labelled with its kind dimmed before the name, cut at 160 px and renamed with its asset, closes with its x or a middle click and goes away when its asset is deleted; a tab always shows its own document instead of following the selection, the picker in the tab head is gone, zoom and scroll are kept per document for the session and dropped on close, a double click on a call node stays in the same tab with breadcrumbs per tab; one editor per kind is switched between documents, the placement rules live in the pure module documents.ts, and the test hook showTab stays as a compatibility path; new e2e module 44 documents (#171)
2026-09-19 15:49:54 +02:00
2026-09-16 08:08:10 +02:00
The topbar is icons only: the leading Project dropdown, the Scene picker and the labelled Play/Pause buttons are gone and in their place stand five icon buttons - menu, undo, redo on the left, play and pause in the middle - while Notice, the save state, fps and the Account menu keep the right side; the Play button swaps its icon for a stop square while the project runs and Pause swaps for a second play sign while it is held (Button.setIcon()), and iconSpace() drops the gap between icon and label when a button has no label, which is what kept a 24 px icon button 3 px off its own centre; the menu carries New project, Open project..., a separator and Project settings..., where the picker (src/editor/OpenProjectDialog.ts) preselects the open project and marks it "open", opens on a double click and puts Delete on the left of Cancel and Open - it closes itself before it asks whether to delete, because two modals on top of each other would have left the question standing over a list it no longer speaks about - and the settings dialog (src/editor/ProjectSettingsDialog.ts) holds the name, the "Play starts" switch (Start scene / Active scene, a preference of this browser and so no command) and the collision layers from #152, which retires CollisionLayersDialog.ts and the "Collision layers..." entry; what Apply actually writes is the pure function settingsChanges(), so renaming and the layers are each their own undo step and each drop out when nothing differs; the Scene dropdown falls away without replacement, the active scene is switched by double clicking it in the Assets panel, which is the way that was there anyway; new module 46 runs last with 9 checks (no label left in the bar, the run buttons in edit mode, the four menu entries, the picker with the open project preselected, Cancel leaving the project standing, the settings dialog on the state of the project, renaming with undo and redo through the icon buttons) and it neither opens nor deletes a project, because that would pull the project out from under every earlier module; modules 8, 18 and 35 and the harness follow the new bar, 6 unit tests cover settingsChanges and 3 the icons (#183)
2026-09-20 16:34:14 +02:00
Tabs are open documents: Scene, Game and Plugins stay as fixed tabs, every other asset opens in its own tab (double click or Enter in the asset panel, on creation, from the list button), several assets of one kind can be open at once, a tab is labelled with its kind dimmed before the name, cut at 160 px and renamed with its asset, closes with its x or a middle click and goes away when its asset is deleted; a tab always shows its own document instead of following the selection, the picker in the tab head is gone, zoom and scroll are kept per document for the session and dropped on close, a double click on a call node stays in the same tab with breadcrumbs per tab; one editor per kind is switched between documents, the placement rules live in the pure module documents.ts, and the test hook showTab stays as a compatibility path; new e2e module 44 documents (#171)
2026-09-19 15:49:54 +02:00
2026-09-16 08:08:10 +02:00
Tabs are open documents: Scene, Game and Plugins stay as fixed tabs, every other asset opens in its own tab (double click or Enter in the asset panel, on creation, from the list button), several assets of one kind can be open at once, a tab is labelled with its kind dimmed before the name, cut at 160 px and renamed with its asset, closes with its x or a middle click and goes away when its asset is deleted; a tab always shows its own document instead of following the selection, the picker in the tab head is gone, zoom and scroll are kept per document for the session and dropped on close, a double click on a call node stays in the same tab with breadcrumbs per tab; one editor per kind is switched between documents, the placement rules live in the pure module documents.ts, and the test hook showTab stays as a compatibility path; new e2e module 44 documents (#171)
2026-09-19 15:49:54 +02:00
2026-09-19 14:29:00 +02:00
2026-09-16 08:08:10 +02:00
2026-09-16 08:08:10 +02:00
2026-09-17 12:53:56 +02:00
2026-09-19 16:30:52 +02:00
2026-09-13 15:31:08 +02:00
2026-09-19 14:29:00 +02:00
2026-09-16 08:08:10 +02:00
2026-09-16 08:08:10 +02:00
2026-09-16 08:08:10 +02:00
2026-09-16 08:08:10 +02:00
Asset panel grouped by kind with icons: assets are listed under a header per kind (Sprites, Behaviors, ...) with the count on the right, empty groups are not shown, every group starts folded when a project is opened, a click on the header folds and unfolds it, selecting an asset elsewhere unfolds its group and folding the group of the selected asset clears the selection; every asset kind has an SVG icon in src/editor/panels/icons/ drawn before the name, the pure rule for grouping and sorting lives in assetGroups.ts; the same icons replace the kind word in document tabs and the overflow menu (a list icon for the List tab, which also fixes the close x lying over the end of the active tab's text), stand before every entry of the + menu (Button got an icon option) and on the right of scene object rows instead of the type name; the colour swatch next to sprite names is gone from both panels; the SVG loader moved to src/ui/svg.ts for both icon sets; test hook assetRow unfolds the group and scrolls to the row, assetRowShown only reads, new hook menuIcons; e2e 4g and 4h, 14 and 44a check the icons (#176)
2026-09-19 18:36:20 +02:00
2026-09-16 08:08:10 +02:00
The topbar is icons only: the leading Project dropdown, the Scene picker and the labelled Play/Pause buttons are gone and in their place stand five icon buttons - menu, undo, redo on the left, play and pause in the middle - while Notice, the save state, fps and the Account menu keep the right side; the Play button swaps its icon for a stop square while the project runs and Pause swaps for a second play sign while it is held (Button.setIcon()), and iconSpace() drops the gap between icon and label when a button has no label, which is what kept a 24 px icon button 3 px off its own centre; the menu carries New project, Open project..., a separator and Project settings..., where the picker (src/editor/OpenProjectDialog.ts) preselects the open project and marks it "open", opens on a double click and puts Delete on the left of Cancel and Open - it closes itself before it asks whether to delete, because two modals on top of each other would have left the question standing over a list it no longer speaks about - and the settings dialog (src/editor/ProjectSettingsDialog.ts) holds the name, the "Play starts" switch (Start scene / Active scene, a preference of this browser and so no command) and the collision layers from #152, which retires CollisionLayersDialog.ts and the "Collision layers..." entry; what Apply actually writes is the pure function settingsChanges(), so renaming and the layers are each their own undo step and each drop out when nothing differs; the Scene dropdown falls away without replacement, the active scene is switched by double clicking it in the Assets panel, which is the way that was there anyway; new module 46 runs last with 9 checks (no label left in the bar, the run buttons in edit mode, the four menu entries, the picker with the open project preselected, Cancel leaving the project standing, the settings dialog on the state of the project, renaming with undo and redo through the icon buttons) and it neither opens nor deletes a project, because that would pull the project out from under every earlier module; modules 8, 18 and 35 and the harness follow the new bar, 6 unit tests cover settingsChanges and 3 the icons (#183)
2026-09-20 16:34:14 +02:00
2026-09-16 14:23:56 +02:00
2026-09-16 18:13:11 +02:00
Plugins belong to the project, and they load before it: the project file gained the field plugins: ["demo-plugin.js"] (default empty, no formatVersion bump), the Plugins tab's switch writes into it as an ordinary undo step (SetPluginActiveCommand) instead of into a server-wide plugins.json, and the start order is turned around - startPlugins only fetches the list of files, then editor.boot() runs and ProjectStore.load(id, prepare) hands the raw JSON through before it is deserialized, where pluginsOf(raw) reads the list and PluginManager.syncTo() activates exactly those; that is the point of the issue, because what a plugin registers has to stand there before normalizeGraph would throw it away as unknown (#126, #127), a project switch first stops what the new project does not name and then starts what it does, a file the server does not have is passed over silently, and after signing out the manager is dead so a late event cannot start anything in a torn-down session; on the server plugins.json, PluginStore::setActive, isActive, the route PUT ?r=plugins/{file} and the 403 for inactive modules are gone and GET ?r=plugins only answers {file,bytes,updatedAt}, which makes every plugin file fetchable - the consequence accepted in #117, written down in the wiki for #115 and #116; publishPlugins(root) only copies files now, the seeder switches the demo plugin on in the fixture project, and the Plugins tab carries a puzzle piece as its icon while only a plugin's own tab still goes without one (the knob and the socket are cubic curves, not arcs, which Pixi's parser draws as a spike after an L); 3 new e2e checks in module 38 and 5 new unit tests cover the project as the owner of the switch, its undo, the order, pluginsOf against crude input and an unknown file name (#119)
2026-09-20 14:24:27 +02:00
2026-09-18 08:01:07 +02:00
2026-09-19 14:03:20 +02:00
One-way platforms, raycast and collision stay with contact data: a collider can be one-way with a side it blocks from (turning with its object, drawn thick in the scene view) and a tile can be one-way from above, one-way cells never merge with solid tiles, a contact blocks only when its normal is within 45 degrees of the blocking side, the new node Ignore one-way lets an object drop through for a while, and it all holds for Move and for dynamic bodies in Rapier, where the decision is made before each step because the hook may not touch the engine (#155); the new Raycast node answers hit, object, collider, point, normal and distance in our own f64 geometry, the same in editor run and play, and the editor run draws each ray for 0.25 s (#153); On collision stay gains an interval with its own clock per pair, and stay and enter gain the contact point next to normal and impulse (#149); fixes that every Rapier collider of a tilemap had the shape of its last cell
2026-09-19 11:36:11 +02:00
2026-09-19 12:54:53 +02:00
2026-09-19 13:13:29 +02:00
Open asset greyed out and real tab cards: Open asset in the scene object menu is only pickable for kinds with an editor of their own, the table of which asset opens which tab moved from Editor.ts into the new module assetTabs.ts with hasAssetEditor so the menu and the editor read the same list, Select asset stays as it was; tabs are drawn as index cards (new module TabButton.ts): the one showing is a light grey card instead of the aggressive blue, rounded above and square below, its name in plain weight and measured bold so it never clips itself, and a mouse down on the tab already showing keeps its colour; the padding left and right grew to 6 px in one place for both kinds of tab, Scene and Game carry an icon too (the scene one from the asset panel, a new game.svg play sign), Plugins and a plugin's own tab have none; new test hook menuEnabled next to menuRows and menuIcons, e2e 01 checks the greyed out entry on a sprite row, 14a-ii the card and the icons of the fixed tabs, 44a the icon at the wider padding (#176)
2026-09-20 11:40:01 +02:00
Changing the password: the Logout button at the far right of the toolbar became an Account menu that names the signed-in account in an entry of its own that cannot be picked, with Change password... above Logout, and the new dialog (src/editor/auth/PasswordDialog.ts) asks for the current password, the new one and its repetition, all three as bullets, and stays standing when the server refuses so that it can say why, unlike the other form dialogs; the rules for empty, too short, new equal to old and a differing repetition sit as the pure function passwordProblem() next to loginProblem(), the API gained POST ?r=auth/password which answers 204, insists on the current password although a session is there, enforces a minimum length of 8 in UserStore::MIN_PASSWORD_LENGTH and again in the client so the mask can answer without asking the server, and the new SessionStore::destroyAllFor($user, $keep) ends every other session of the account while the tab that changed the password keeps its own; the placeholders admin/admin and user/user stay as they are, which the length check does not touch because it only runs when a password is set through the API; e2e 45 grew by 8 checks for the menu, the dialog, both refusals and signing in with the old and the new password, and it sets the e2e account back at the end - a run dying in between leaves it on <password>-tmp, which a make-user.php call repairs (#182)
2026-09-20 13:46:40 +02:00
The topbar is icons only: the leading Project dropdown, the Scene picker and the labelled Play/Pause buttons are gone and in their place stand five icon buttons - menu, undo, redo on the left, play and pause in the middle - while Notice, the save state, fps and the Account menu keep the right side; the Play button swaps its icon for a stop square while the project runs and Pause swaps for a second play sign while it is held (Button.setIcon()), and iconSpace() drops the gap between icon and label when a button has no label, which is what kept a 24 px icon button 3 px off its own centre; the menu carries New project, Open project..., a separator and Project settings..., where the picker (src/editor/OpenProjectDialog.ts) preselects the open project and marks it "open", opens on a double click and puts Delete on the left of Cancel and Open - it closes itself before it asks whether to delete, because two modals on top of each other would have left the question standing over a list it no longer speaks about - and the settings dialog (src/editor/ProjectSettingsDialog.ts) holds the name, the "Play starts" switch (Start scene / Active scene, a preference of this browser and so no command) and the collision layers from #152, which retires CollisionLayersDialog.ts and the "Collision layers..." entry; what Apply actually writes is the pure function settingsChanges(), so renaming and the layers are each their own undo step and each drop out when nothing differs; the Scene dropdown falls away without replacement, the active scene is switched by double clicking it in the Assets panel, which is the way that was there anyway; new module 46 runs last with 9 checks (no label left in the bar, the run buttons in edit mode, the four menu entries, the picker with the open project preselected, Cancel leaving the project standing, the settings dialog on the state of the project, renaming with undo and redo through the icon buttons) and it neither opens nor deletes a project, because that would pull the project out from under every earlier module; modules 8, 18 and 35 and the harness follow the new bar, 6 unit tests cover settingsChanges and 3 the icons (#183)
2026-09-20 16:34:14 +02:00
The topbar is icons only: the leading Project dropdown, the Scene picker and the labelled Play/Pause buttons are gone and in their place stand five icon buttons - menu, undo, redo on the left, play and pause in the middle - while Notice, the save state, fps and the Account menu keep the right side; the Play button swaps its icon for a stop square while the project runs and Pause swaps for a second play sign while it is held (Button.setIcon()), and iconSpace() drops the gap between icon and label when a button has no label, which is what kept a 24 px icon button 3 px off its own centre; the menu carries New project, Open project..., a separator and Project settings..., where the picker (src/editor/OpenProjectDialog.ts) preselects the open project and marks it "open", opens on a double click and puts Delete on the left of Cancel and Open - it closes itself before it asks whether to delete, because two modals on top of each other would have left the question standing over a list it no longer speaks about - and the settings dialog (src/editor/ProjectSettingsDialog.ts) holds the name, the "Play starts" switch (Start scene / Active scene, a preference of this browser and so no command) and the collision layers from #152, which retires CollisionLayersDialog.ts and the "Collision layers..." entry; what Apply actually writes is the pure function settingsChanges(), so renaming and the layers are each their own undo step and each drop out when nothing differs; the Scene dropdown falls away without replacement, the active scene is switched by double clicking it in the Assets panel, which is the way that was there anyway; new module 46 runs last with 9 checks (no label left in the bar, the run buttons in edit mode, the four menu entries, the picker with the open project preselected, Cancel leaving the project standing, the settings dialog on the state of the project, renaming with undo and redo through the icon buttons) and it neither opens nor deletes a project, because that would pull the project out from under every earlier module; modules 8, 18 and 35 and the harness follow the new bar, 6 unit tests cover settingsChanges and 3 the icons (#183)
2026-09-20 16:34:14 +02:00