MatchResultScreen becomes a self-contained modal (IsOpen/Open/Close,
_panelRoot, pause handling); resolution auto-open moves there from the
session browser. OverviewMenu integrates it into the Esc chain and hides
the Match Results button until results exist (same pattern as the
role-scoped mode buttons).
Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
- New OverviewMenu component: Esc toggles the pause overlay, buttons
switch modes via GameModeManager.TrySwitchTo<T>() and close the panel;
visibility follows the role-scoped mode set, active mode disabled.
- Esc in paint mode exits to camera mode instead (PlayerControlMode,
hunter falls back to FirstPersonMode) rather than opening the menu.
- Centralized all Esc handling in OverviewMenu (browser close included)
to avoid frame races; OnlineSessionBrowserUI gains IsOpen/Open/Close.
- GameModeManager: switchKey Tab-cycle removed, TrySwitchTo<T> added.
Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
- New occlusion opt-in on SoundEffect: spatialized instances get a
SteamAudioSource with raycast occlusion + frequency-dependent
transmission (walls muffle instead of hard-mute)
- Replace SoundEffectDistanceRange asset indirection with an explicit
_3d bool (user refactor); rolloff/distance now left to defaults
- Hey.asset: occlusion enabled
Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
MatchManager: new Radar Ping Sound property; MsgRadarPing now goes to
all clients (spawnBlips flag keeps blips hunter-only), sound plays 3D
at each pinged hider. Distance-based stagger (speed of sound + 35 ms
min gap) prevents phase cancellation when multiple hiders ping.
SoundEffect: new spatialize toggle (per asset, applied only to 3D
instances -> Steam Audio HRTF); removed unused fade field.
Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
Particles kept playing at the last hit position when the cursor left the
mesh mid-stroke. New _stampLandedThisFrame flag: reset before each stamp
attempt, set only where the dab actually paints (after placement and
corner guard); no landed stamp -> StopPaintParticles immediately.
Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
- Cursor_Normal/Paint/Pipette: generierte Grafiken jetzt in Vollauflösung (766-829 px, Max Size im Importer steuert Anzeigegröße), Paint-Ring-Inneres freigestellt
- Neuer Cursor_Blank (transparent): wird während eines Strokes auf dem Mesh gesetzt statt Cursor.visible zu togglen (fixt Flicker-Kampf mit dem Orbit-Input)
- CursorController: Hotspots normalisiert (0-1, unabhängig von Import Max Size); Zustandskette Pipette > (Stroke ? Blank : Paint) > Normal; off-mesh während Stroke -> Normal
- MeshPainter: StrokeInProgress-Flag (Maustaste auf Paint-Pfad gehalten)
Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
- CursorController: polls painter state in LateUpdate; paint cursor only
while the brush preview decal actually draws (MeshPainter.BrushPreviewVisible),
pipette while held/toggled, fallback to normal over UI (InputUtil.PointerOverUi)
- Auto ForceSoftware while Unity Recorder is recording (reflection into
editor-only assembly, 0.5s poll, editor-only) so the cursor is captured;
back to hardware cursor when recording stops
- 3 placeholder cursor PNGs (32x32, cursor import type) with per-cursor hotspots
Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
IsGloballyEnabled() kill switch: Awake destroys the component at
runtime, OnEnable self-disables in the editor. Flip the constant to
re-enable.
Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
- Distanz-LOD am Renderer (Start/End/Min Shells, pro Kamera), Rendering Layer Mask wie beim MeshRenderer
- Cutout in der AlphaTest-Queue statt Transparent-Blend (Early-Z killt Overdraw), Shells tip-to-root submitted
- LightMode UniversalForwardOnly (Deferred+ hatte den Opaque-Pass sonst nicht gezeichnet)
- FurGBuffer-Pass (ComplexLit-Muster): HTrace WSGI sieht das Fell, kein Durchscheinen mehr
- Root-AO-Fix: Grading straehnen-relativ (gradeH) statt absoluter Shell-Hoehe -- schwarze Streifen weg
- Distanz-Aggregations-Fade wieder entfernt (auf Wunsch, Fern-Straehnen bleiben voll)
Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
Transparent queue sorted fur draws per object, so overlapping fur
renderers swapped in front of each other frame to frame. FurForward
now writes depth; new Depth Sort Clip tunable discards low-coverage
fragments before they write depth (avoids halo punch-through).
Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
The mixer's start snapshot overwrites exposed params set before the
first frame, so the BeforeSceneLoad SetFloat was discarded. Re-apply
the saved volume after one frame (Awaitable.NextFrameAsync).
Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
Shader (PictureTessellationLit):
- Lighting parity with URP Lit: lightmaps, shadowmask/mixed, APV, DBuffer
decals, vertex additional lights, rendering layers, fragment fog
- UniversalGBuffer pass (with tessellation + graded albedo) so HTrace WSGI
composes correct GI instead of a cyan veil over pictures
- Skip GPU tessellation entirely when strength/displacement is 0
- Inspector ranges matched to builder (-3..3 bump, -10..10 tessellation)
Builder:
- Frame Thickness & Padding are now absolute meters (size-independent)
instead of fractions of the picture size
- Tooltip updates for the new default/range semantics
Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
- Optional Picture Normal Map + Height Map fields on the per-frame material
instance (_BumpMap/_NORMALMAP keyword, _HeightMap; height doubles as
occlusion map when the material has none)
- Sliders: Normal Map Strength, Occlusion Strength, Tessellation Strength
(0-3, default 1), Occlusion Contrast (-1-3), Brightness (0-3)
- Picture Crop left/right/top/bottom via UV window remap; aspect follows
the cropped pixel dimensions
- Picture Subdivisions (1-64): picture surface as triangle grid for
tessellation displacement
Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
Right-click a texture > Process > Generate Normal + Height Map (DeepBump):
runs the DeepBump ML CLI (color_to_normals, then normals_to_height) in the
background with progress display. Sources larger than 2048px are downscaled
via Pillow/Lanczos first (quadratic tile cost, avoids grid seams). Normal
imports as Normal Map, height as linear (sRGB off). Tool lives outside
Assets under Tools/DeepBump (gitignored: cloned repo + local venv).
Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
Classic hit path now captures a statue record like conversion does;
rename the statue infrastructure (CaptureStatue/SpawnStatues/
DespawnStatues/_statueRecords) since it is no longer conversion-only.
Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
A pointer-up after a drag no longer counts as a click (dragging flag +
press-to-release distance within the existing tolerance), so drag ->
release -> click cannot trigger a reset anymore. PaintHud prefab:
pointer tolerance 4 px, HalfLambert default back to 0.5.
Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
Assigned texture drives the picture material BaseMap via a per-frame
material instance (asset untouched, frames sharing a material stay
independent) and takes priority for aspect resolution. New default
picture material Frame Picture.mat wired in the script defaults.
Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
Frame thickness, corner radius, padding, inner depth and picture depth
are now normalized factors (scale with Size, no dead clamp zones).
Picture aspect is computed inside-out so padding and frame thickness
no longer distort the image. New Frame Inner.mat as inner default.
Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
Replace Width/Height with a single Size (longer side); the shorter side
follows the picture material's base map source-image aspect (editor-
resolved, serialized for builds, 1:1 fallback). Add Range attributes on
all frame parameters and default material references (new Frame.mat).
Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
Rebuild now runs once per frame via ExecuteAlways Update (OnValidate only
sets a dirty flag + QueuePlayerLoopUpdate), fixing inspector drag stutter
from stacked delayCalls. Adds automatic BoxCollider generation (4 frame
bars, opening slab, optional pedestal box for raised pictures) with an
ownership list so manual colliders stay untouched. Corner radius is
intentionally ignored for colliders.
Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
Plays a list of items (clip + percentage range) on a VideoPlayer.
Double-buffers via a second player (auto-created child incl. AudioSource
copy) and drives the screen texture through a MaterialPropertyBlock,
flipping only once the next player delivers frames - no black/freeze gap.
Editor drawer renders each item as clip row + min-max percent range slider.
Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
Right-click a VideoClip -> Process -> Ping-Pong Video: runs ffmpeg in the
background (forward + reversed video concat, audio played twice), writes
<name>_pingpong.mp4 next to the source and imports it. Supports
multi-select, silent clips (video-only retry), progress display and
unique output paths.
Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
Ground-stepOffset analogue for climbing (wallStepOffset, default 0.1):
when climb movement is blocked by a small ledge, the capsule lifts
along the wall normal in pre-swept sub-steps and continues, with a
short servo hold to prevent being pulled back into the ledge. Ground
detach while climbing down now requires floor that extends away from
the wall, so narrow step tops no longer cause a mid-wall exit.
Wall->ceiling handoff additionally checks OverheadIsPassableStep():
if the overhead surface is only a small protrusion within the step
allowance, the handoff is skipped and the step pass carries the
capsule over the edge. Genuine overhangs hand off unchanged.
Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
PlayerNameplates clones a GameObject container instead of a single
TMP_Text and drives all TMP_Text children (text + distance font size),
so the label template can be authored with layered texts (e.g. outline
or shadow copies) in the editor.
Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
Applying a snapshot now also raises the replica's sequence horizon: a
snapshot covers all events up to its captured cutoff. Previously the
horizon only advanced with the live stamp stream, so the server replica
of a player who never painted served snapshots with cutoff 0 - late
joiners then waited forever for the published baseline cutoff and the
reveal gate never opened (third client could not see the second).
Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
MatchManager tracks per-participant outcomes from match start (hunter /
hiding / found / converted / left), freezes hit rows with seek time and
finder name, and decides the winner at seek end (any untouched hider ->
hiders win). Results replicate via a Match_Result named message,
broadcast live on hide start, every hit and mid-match leave (no-op once
the winner is frozen), with late joiners served the current state.
MatchResultScreen renders the scoreboard as a section of the session
panel: winner banner ("Match in progress" while live), summary counts
and pooled rows (name, outcome, time, found by); the section hides when
no result data exists. OnlineSessionBrowserUI auto-opens the Esc
overlay when the Resolution sub-phase begins.
Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
Generalize the body-renderer gate to all avatars so nameplates inherit
the existing visibility matrix (hide phase, found hiders, paint reveal,
conversion settle), and add the one case the body gate cannot cover:
hunters see camouflaged hider bodies during seek, so suppress hider
names for a local hunter viewer while LocalSubPhase == Seek.
Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
- GameSettings: playerName field persisted in Settings.json
- NetworkPlayerSetup: owner-written DisplayName NetworkVariable
(seeded from settings on spawn, sanitized/truncated, live rename push)
- PlayerNameField: binds the session panel name input to settings
- PlayerNameplates: screen-space overlay labels above players with
distance-based font scaling (clamped min/max), pooling, FP self-hide
Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
The swept-sphere probes tilt their contact normal while rolling over a
thin board's edge, which faked slope top-outs, ceiling hand-offs and
bare-rim vaults mid-face. Confirmed via temporary exit-path logging
(stripped again) and fixed at the verified causes:
- RaycastWallFace: confirm "face flattened into a slope" with a thin,
strictly horizontal ray instead of trusting the tilted sphere normal
(a vertical board still reads steep; real ramps still top out).
- Rim judging: the full-capsule span probe is the arbiter — while it
still sees a steep face anywhere along the capsule, re-adopt that true
normal (breaking the tilt self-amplification feedback loop) and keep
climbing; only a persistent rim (wallTopOutConfirm debounce) vaults.
- WallContinuesAbove: band-sampled horizontal sweep so a grazed shelf
edge above never reads as a cleared rim.
- Bare rim: parks by default (upward motion clamped); holding up vaults
over the edge via MantleOverEdge, headroom-gated.
- ProbeWallSpan sweeps strictly horizontally; center probe always
rejects down-facing hits (edge grazes), wall->ceiling hand-off only
via the explicit head-gap check against clearly down-facing surfaces.
- Slope/ground top-outs additionally gated on a genuine stand
(HasStandableTop) so a board's own top edge no longer detaches.
Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
Sweep over 48 files (Editor/ excluded): remove comments that restate the
code, condense class summaries, fix three stale doc statements
(HsvColorPicker alpha bar, PaintHud layoutPrefab, MasterVolume
FallbackDefault). Inline two single-use wrappers (IsPointerOverUi,
BuildModes), drop an unused using, replace a magic literal with the
existing ParallaxBase constant, and convert ~10 UnityEngine.Object null
checks to the implicit-bool convention. No serialized fields, signatures,
RPC/NetworkVariable names, defaults, or #if blocks touched.
Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
- Replace all thin raycast climb probes with capsule-width SphereCasts:
fixes drop on thin boards (mid-face contact never lost, top-out only
fires at the real top edge) and edge flicker on curved surfaces
(continuous contact normal instead of per-frame face flips)
- Remove WallProbeTangentSamples fan fallback (obsolete with SphereCasts)
- Collapse WallInFront/WallPresentAtOffset/WallHitAt into WallPresentAt,
inline ApplyMeshOffset wrapper
- Trim redundant comments, keep non-obvious rationale and tooltips
- No serialized fields removed or renamed (prefab values intact)
Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
ProbeWall now falls back to a horizontal multi-sample fan across the capsule
cross-section when the center ray misses, so a thin/narrow board keeps its
grab instead of dropping after wallExitGrace (which stays at 0.15). The
top-out mantle no longer commits on the first probe miss: it requires the
top-edge signature (wall at foot, moving up, headroom clear) to persist for
wallTopOutConfirm (new tunable, default 0.06s) and uses hardened multi-sample
foot/headroom probes, so a transient mid-face miss or a VHACD hull gap no
longer triggers a false mantle.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
Cache each environment candidate's world AABB once per evaluation and gate
the expensive per-voxel tests (Collider.ClosestPoint, ContainsWorld, concave
raycast) behind a cheap bounds.Contains prefilter. Collapses the hot loop
from O(voxel x colliders) worth of ClosestPoint/raycast calls to O(voxel x
few) for dense collider clusters (VHACD hulls, furniture), removing the
framedrop when overlapping many colliders. Conservative AABB test never
drops a real hit, so EmbeddedPercent is identical, just cheaper.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
Move brightness out of the half-lambert diffuse term to a final exposure
multiply on the whole shaded body color (diffuse + GI + specular), and add
a saturation grade (0 = neutral, -1 = grayscale, >0 = boosted) on the same
final stage. Saturation rides as a 4th component on CamoKnobs (Vector3 ->
Vector4) so it inherits all three persistence paths: HUD JSON, network
replication (_camo NetworkVariable), and painting-slot metadata. Wires the
renamed Slider_Brightness and new Slider_Saturation. Bumps HudFileVersion
and PaintMetaVersion with load-time remaps so existing paintings keep their
look (old 1=neutral saturation remaps to 0=neutral).
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
New [ExecuteAlways] component that renders the skybox (or an optional override material) into a custom reflection cubemap and refreshes DynamicGI so smooth/metallic materials reflect the sky without a baked LightingData asset. Uses a deferred apply plus a synchronous warm-render so the ambient probe resolves after domain reload; runs the reflection capture as a stripped CameraType.Reflection to avoid the URP MIP-bind error. Exposes reflection intensity (0..4) and optional ambient override.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
RunSeekPhase fired the interval ping from an accumulating countdown that discarded each cycle's frame overshoot and drifted seconds late over a match, while the HUD ping countdown is anchored absolutely to _seekStartTime. Fire on absolute interval boundaries (n*interval from _seekStartTime) instead, sharing the HUD's anchor so the on-screen timer hits 0:00 the same moment the sweep fires. A missed boundary is skipped, never bursted.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
Drop the resolution gate in LoadPaintByName/ReadMapPng. A slot saved at any size is now bilinearly resampled per map to the current avatar's textureSize (new ResampleBilinear/Bilerp helpers, running on the stored bytes with no gamma conversion to match downstream consumption), so any painting loads onto any avatar regardless of the size it was saved at.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
Drop the _FurScaleInfluence blend (fur stays a constant world length at
any avatar size, as tuned to influence 0) and scale the gravity curvature
droop by the avatar world scale (_FurObjScale) instead, so the bend tracks
the player: hider 0.5 => smaller droop, hunter 1.5 => bigger droop.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
adminandClaude Fable 5