3f57cf731dc472017c6dbf50186ebfaf29ed3850
62
Commits
| Author | SHA1 | Message | Date | |
|---|---|---|---|---|
  adminandClaude Opus 5.5
|
8452a99c64 |
Let a graph read and change the z of an object
Until now a behavior could not move an object in front of another while the game runs. Set position writes only x and y, and z lives on the running object rather than in its props, so Properties cannot reach it either. Drawing already reads the z every frame, so only the nodes were missing. - Get Z (data): object in, z and world z out. World z is summed up with the parents, the way drawing does it (worldTransformOf). - Set Z (action): object and z in. It sets the object's own z, local to its parent like Set position. Higher is drawn in front from the next frame on. - Two nodes of their own rather than a z port on Set position and Get position, as asked. Tests: - node-catalog: Get Z for a child (2 below 5 is world z 7) and for no object, Set Z writes only z and leaves x/y. - set-z.test.ts: in a running world a key sets the lower of two sprites to z 2, drawSlots then draws it in front, Get Z logs 2 and 2. - Two counter-checks bite: Set Z without the write and Get Z without the parent fail 3 tests. - Gate: 233 files, 3548 tests (3542 + 6), CHECK EXIT 0. Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> |
||
|
adminandClaude Opus 5.5
|
d9c6bbfa4d |
Add a node that names the render layer of an object (#305)
The issue asked for Set render layer, Set sees and Render layer of. As with #211, a probe showed that writing already works. A Properties node of the object's type writes Render layer during a run, Inherit included, and one of type Camera writes Sees. The next picture follows both. As agreed, only Render layer of is built, and writing stays with Properties. - Render layer of is a data node with the input object and the outputs name and number. It answers the layer that holds, so an object without a choice of its own names its parent's. - NodeContext.renderLayerOf answers the number with the same rule the drawing uses (renderLayerAlong). The new field renderLayers on GraphLookup brings the names to the node. - hasRenderLayer in PropertySchema says which types are drawn. - Decided here: for an object that is not drawn (a camera, a behavior, a collider) the name is empty and the number -1, as Layer of does without a collider. Changing the render layer or Sees during a run had no test so far. Three unit tests now hold the proof from the issue. Tests: - Gate: 231 files, 3534 tests (3526 + 8), exit 0 - e2e 6: 149 checks passed, e2e 63: 13 checks passed (+1) - Unit: the coin moves into the overlay with Set and back with Inherit, a HUD container takes its sprite along, the main camera sees a second layer once its Sees is set, and Render layer of names the inherited layer, and none for a behavior - Node catalog: four cases for Render layer of - 63c3 moves a sprite onto UI in a Play run: the main camera no longer draws it, and the log reads "UI" and "1" - Three counter-probes fail 1, 1 and 2 tests: without inheriting in the node, without the check for a drawn type, and without inheriting in the drawing - "layer of" in the palette still finds Layer of first (6z-x) - The e2e sum is 1731 (1730 plus 1) Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> |
||
|
adminandClaude Opus 5.5
|
70f3608733 |
Let Mouse position and Is hovered see through any camera (#304)
An overlay camera from #302 can stand elsewhere and zoom differently.
A HUD button only it shows lay somewhere else in the world than the
mouse of the main camera, so Is hovered never found it. Both nodes now
take a camera and see the mouse through that camera's picture.
- New input `camera` on Mouse position and Is hovered. Left open, both
read the main camera exactly as before.
- `pointerThrough` in core/properties/camera is the rule as a pure
function. It fits the camera's picture into the main one and centres
it, the same way overlayView draws it.
- The game view reports where the mouse lies on the main picture, as a
part of its width and height. The world turns that into a camera's
view, so a main camera on the move does not drag the mouse across
the HUD while the mouse stands still.
- `in view` is true only on the camera's own picture. A camera that is
not drawn (switched off, a second plain one, not a camera) never has
the mouse on it.
- On click and Mouse button stay with the main camera, as agreed in
the issue.
Also fixes a unit test that
|
||
|
adminandClaude Opus 5.5
|
0dda6a012a |
Walk an object to a point, and measure distance in the world (#296)
The slime of #296 walks to three kinds of point: a spot in its home area, home again, and the player. Each of those took about eight nodes, and Distance measured between local positions, so it was wrong for the player, whose sprite sits inside a container. - New node Move toward: steps an object toward a world point by at most speed times dt and stops exactly on it. Below a moved or turned parent the step is turned into the axes Move counts in. - With Collide with solids it moves the way Move does. Outputs are arrived, the distance still left and hit. - Distance now measures in world units, however deep each object is nested. The slime itself, its state machine, the player's lives and the change to the Break animation live in the project, not in the repo. Tests: - Gate on melektaus-atx: 220 files, 3442 tests (3436 + 6), CHECK EXIT 0. - Six new catalog cases. Both counter-checks bite: Distance back to local positions fails one, Move toward without the parent's axes fails one. - No e2e module touches these nodes. The e2e sum stays at 1701. Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> |
||
|
adminandClaude Opus 5.5
|
f1e3bd8378 |
Let a joint glide on a rail and drive it with a motor (#154)
Step 2 of the joints: a door that opens by itself, a lift and a piston need a joint that slides along one line and a motor that turns or pushes. A graph also needs to read how far such a joint stands. - Slider: a fifth joint type on Rapier's prismatic joint. Its rail is the joint's own x axis, so turning the joint turns the rail. Joints now carry Scale, Rotation and Mirror like a sprite. - Limit distance with Min and Max, in world units from where the object was placed. - Motor on hinge and slider: Off, Speed or Target, with Motor speed, Motor target and Max force (0 = no limit). Target goes there at no more than the speed and slows down for the last stretch. - Changing speed, target or force keeps the engine joint. Switching the motor on or off builds it again. - New node Joint position: value and speed of a hinge (degrees, counting past a full round) or a slider (world units). - Scene view draws a slider's rail dashed, with a tick at each limit. - shownFor in the schema takes a list of choices that must all hold. Findings, measured with a probe against Rapier 0.20: - A prismatic joint holds both bodies at one angle. Held to the scene or to an object without a rigidbody, the joint's own anchor body is turned by the placed difference, so nothing jumps. Between two rigidbodies the held one is turned to match, and the console says so once. - Rapier reads no joint angle back. The position is worked out from the two bodies. - A hinge motor is weak on a small body at the end of a long arm (box 20 on an arm of 100 does not lift itself). More solver iterations would help but cost every scene. A door of 100 x 20 reaches -90 and holds it. This is written in the wiki. Tests: - Unit: 16 new in joints.test.ts, 1 in joint-links, 3 catalog cases. - e2e 41: 27 checks (25 + 2), block 41f with a real mouse in the inspector and the motor in play (59.1 of 60 units in 1 s). - 9 of 9 unit counter-probes fail as they should. - Gate: 220 files, 3436 tests (3416 + 20), CHECK EXIT 0. - e2e total 1701 is counted (1699 + 2), the full suite did not run. Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> |
||
|
adminandClaude Opus 5.5
|
7dd3ae1131 |
Tie two objects with a hinge, a spring, a rope or for good (#154)
Two bodies could not be connected: no door on a hinge, no lamp on
a rope, no wheel on an axle. This is the first step of the issue,
the four joints without a motor. The slider and the motors follow
in a second step under the same issue.
- Joint is a new asset type, placed as a child of the object it
holds, like a collider or a rigidbody. "Add joint…" in the
object menu makes one or places one the project has. An object
takes as many as it needs.
- Where the joint sits is the point it holds its object at. A
hinge and a fixed joint have that one point only. A spring and a
rope end at a connected anchor on the other object, counted in
that object's own units, or in the scene's without one.
- The rows follow the type: length, stiffness and damping for a
spring, length for a rope, an angle limit for a hinge. Length 0
takes the distance the two ends were placed at. The limit counts
from how the two were placed.
- The connected object is an object reference in the schema of the
type. Pasting, containers and removing treat it as they treat
every reference since #258.
- shownFor is a new schema option: a row is shown while an enum of
the same bag holds one of the named values.
- The object needs a rigidbody, its own or one further up. Without
one the joint holds nothing and the console says so once.
- A connected object without a rigidbody is a moving anchor: the
joint has a kinematic body of its own that follows it.
- A connected object destroyed while playing makes the joint let go
with a hint. Removed in the editor the reference empties, so the
joint holds on to the scene. The issue asked for "inactive" there.
- "Add joint" ties two objects while the game runs, from a joint
asset as the template. Destroy on the joint lets go, there is no
Break joint node. Destroy with keep children takes the joints
along with the object.
- The scene view draws a line from each joint to what it holds on
to and rings the held point. A selected spring or rope has a
round handle on its far end, and dragging it is one undo step.
- Joints hold in Play only. The editor run simulates nothing
(#148), and the inspector of a placed joint says so.
- Rapier counts a revolute joint's limits absolutely, not from the
start, so the placed angle is added. Measured with a probe.
- The + menu has 25 types now and no longer fits under its button
on a canvas 800 high. It scrolls there, and e2e 04 scrolls to
the last entry instead of expecting it in view.
Tests:
- Gate on melektaus-atx for this state: 218 files, 3390 tests
(3336 + 54), exit 0.
- e2e 1-16,24,39-46,51,52,57,58 on melektaus-atx: 831 checks, all
pass. Module 41 alone: 25 checks (21 + 4).
- 54 new unit tests: 40 in joints.test.ts (rope, spring, pendulum,
limit, fixed, the other end, the node, containers, paste), 6 for
the line the scene view draws, 4 catalog cases of the node. The
remaining 4 come from tests that make a case per asset type.
- Four new e2e checks in module 41: Add joint from the menu, the
rope to the hook with its line and handle, dragging the handle
with one undo, the bob hanging in Play next to one that falls.
- e2e 04, 40 and 46 count the new type in their lists.
- 21 of 22 unit counter-probes fail their tests. The other one is
equivalent: Rapier ignores removing a joint that left with its
body, the guard stays.
- Three browser counter-probes fail their checks (2, 1 and 2).
- One screenshot looked at: icon, line, handle and the rope rows.
- The e2e sum of 1691 is counted (1687 + 4, 1687 measured by CI
on
|
||
|
adminandClaude Opus 5.5
|
46c620ae3b |
Give a behavior more ways in and out, and hear it as an event (#294)
A behavior run by another one had a single flow port at its Start and at its End, so it could not branch for its caller. And it could not be used as an event: a call needs a pulse at its flow input, and the events of a called graph never fire. An input like "Confirm" (Space or Enter) had to be built again in every graph. - A declared port of a Start or an End node can be of the kind Flow. It sits above the values and shares their names, exec stays reserved. Only these two nodes declare one, a struct does not. - Run behavior shows a flow port of the Start as a further flow input. A call arriving through it leaves the Start through the output of that name and not through exec. - Run behavior shows a flow port of the End as a further flow output. The call goes on through the one the End was reached by last, and then through exec. exec fires always, as before. - On behavior is a new event node without a flow input. The behavior it names runs at the node for as long as the behavior around it runs, with all of its own events and one set of variables per node. - Its outputs are those of the End. It fires once the inner pulse is through, by the output the End was reached by last, exec only for End.exec. A pulse that never reaches the End is not seen. - The value ports of the Start are its inputs, read anew for each inner pulse. The Start itself never fires there. - It nests to any depth. Under a Run behavior it stays silent. A behavior hearing itself, however far round, is not started and the node says "A behavior cannot listen to itself". - The palette offers every other behavior with an End once more as "On <name>". A node naming one without End says so. - An On node removed while the game runs ends its behavior with On disable and On destroy. The sounds of the entity end only with the behavior placed on it. - Renaming and deleting a declared port follows the edges at On behavior nodes as it does at Run behavior nodes. - The flow outputs of the Start of a behavior placed on an object never fire, like its exec. - The engine prompt of the benchmark names flow ports and On behavior. Tests: - Gate on melektaus-atx right before this commit: 215 files, 3319 tests (3278 + 41), exit 0. - e2e 19 on melektaus-atx: 39 checks (+4), all pass. e2e 1-6,17-24,26,36,51: 628 checks, all pass. - 19 unit tests in flow-ports.test.ts, 19 in on-behavior.test.ts on a real world, the rest in the node catalog. - Four new e2e checks in module 19: a flow port declared by mouse at the End, On Confirm in the graph, the call leaving through the further output while playing, Enter and Space on a real keyboard. - 19 unit counter-probes all fail their tests. One did not at first (a removed node kept its instance), a test was added. Two browser counter-probes fail their checks. - One screenshot looked at: On Confirm with exec and pressed, the second flow pin at the calling node. - The e2e sum of 1680 is counted (1676 + 4), the full suite and the smokes did not run. - Not seen in the browser: flow inputs at the Start, nesting, the ring, values through On behavior, the palette entry. No test holds that the sounds of the entity go on when a heard behavior ends. Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> |
||
|
adminandClaude Opus 5.5
|
b5339b96c2 |
Tell a graph the frame a key went down or came up
Key is down says whether a key is held. To act once on a press, a graph had only the events On key down and On key up. A behavior that is called by another one and reads its input as data had to keep the state of the last frame in a variable of its own. - Key was pressed is true for the one frame in which the key goes down, the frame On key down fires in. Key was released is the same for the frame the key comes up. - Both sit next to Key is down in the palette and have the key as their only setting. - NodeContext gains wasKeyPressed and wasKeyReleased. The behavior context answers them from justPressed and justReleased of the input, through keyName, so a key saved as "A" meets the key "a". - No repeat. On key down may fire again while a key stays held, a held key is pressed once here. - When the window loses the keyboard, every held key counts as released in that frame, as On key up has it. - The engine prompt of the benchmark names the two nodes. Tests: - Gate on melektaus-atx right before this commit: 213 files, 3278 tests (3264 + 14), exit 0. - e2e 18,20,43 on melektaus-atx: 57 checks, all pass. - Ten unit tests in key-edges.test.ts on a real world, four cases in the node catalog. - Eight counter-probes all fail their tests. One did not at first (the case of the key saved on the node), a test was added. - No e2e check of its own, the sum stays 1676. The nodes were not looked at in the browser, neither in the palette nor with a real keyboard. Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> |
||
|
adminandClaude Opus 5.5
|
3e8c88c66d |
Add a node that names the collision layer of an object (#211)
The issue asked for three nodes: Set layer, Set collides with and Layer of. A probe showed that the finding behind the first two is outdated. The Properties node of type Collider already writes both settings while the game runs, and both collision systems see the change at once. As agreed, only Layer of is built, and writing stays with Properties. - Layer of is a data node with the input object and the outputs name and number. The name is what the project calls the layer. - NodeContext.collisionLayerOf answers the number, and the new field collisionLayers on GraphLookup brings the names to the node. - layerHolderOf in solids.ts says whose layer counts. An object stands for its first collider child, a collider or tilemap for itself. - Decided here: a collider that is switched off counts too, because its layer is set either way. - Decided here: without a collider the name is empty and the number is -1. - The node is a read, not a run, so it answers at the moment it is asked. Right after a Set in the same flow it names the new layer. - The output number was not asked for. It fits the layer port of Properties as it is. Changing the layer during a run had no test at all so far. Five tests now hold it in both systems. Tests: - Gate: 198 files, 2929 tests (2914 + 15), exit 0 - e2e 1-6: 285 checks passed (06: +2 for block 6z-x) - Five unit tests for the change during a run: a mover is blocked, passes and is blocked again, a ray with a layer filter follows the change, and a dynamic body falls through the ground in Play - Six unit tests for Layer of, three against each system, and four cases in the node catalog - 6z-x finds the node in the palette, checks its ports and logs "Ghost" and "1" for the owner's collider in a Play run - Two counter-probes for the change during a run fail 1 and 4 tests, and only new ones, so those places were unguarded before - Six counter-probes for Layer of fail 2 to 3 tests each. All eight ran on stein2, not in the container. - The browser counter-probe fails 6z-x with "Layer 1" and "1" - The e2e sum of 1619 is calculated (1617 measured in CI run 276, plus 2). Neither the full suite nor the smokes ran for this state. - Not looked at in the browser: that the layer port of Properties shows the same picker as the inspector. Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> |
||
|
adminandClaude Opus 5.5
|
c1cc80bb45 |
Add nodes that ask whether an animation still runs (#233)
A graph could start, pause and stop an animation and hear it finish, but it could not ask in between whether one runs or how far it is. Two data nodes answer that now. - Animation playing takes an object and an animation and gives playing, progress and time left (s). It answers at the moment it is read: right after Play animation in the same pass it says on, and in the frame On animation finished fires it says off. - With Animation at None it answers for the running animation started last on the object. - Animation length gives the seconds of one pass, from the timeline and the frame rate alone. - The rule is a pure function in src/core/model/animation.ts (playerStatus, leadingPlayer). The nodes reach an animation's length through a new field animation on GraphLookup. - animationPort is exported so both nodes show the same picker as Play animation. Decided in the issue: a Once (reset) counts as running while it blends out, and progress and time left also hold for Loop and Ping-pong, at the place of the playhead. On Ping-pong progress falls again on the way back and time left counts to the next turn. Decided here, the issue says nothing on it: - A paused animation does not count as running. Progress and time left stand still. - One that Stop animation fades out does not count as running, and its time left is 0. - Time left of a Once (reset) includes its blend out. While it blends out progress is 1 and time left is the rest of the fade. Finding, not fixed: on the node the name of the chosen animation overlaps the output label progress in the same row. That comes from the fixed node width in NodeView and was seen in the Fit view only. Tests: - Gate: 198 files, 2903 tests (2891 + 12), exit 0 - e2e 1-6: 282 checks passed, 06 has +2 for block 6z-ix - Nine unit counter-probes fail, 1 to 4 tests each - The browser counter-probe fails 6z-ix with ["false","false"] - e2e total 1615 is computed, not measured in a full run. The smokes were not run. Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> |
||
|
adminandClaude Opus 5.5
|
0f6e628616 |
Check the declared type when a graph writes a typed variable (#271)
A list variable with an item type only kept its shape in the editor. A graph could write any list into it at runtime, and the List node had no type at all. Now the declaration decides what a write may store. - Writing a list into a typed list variable leaves out every item that does not have exactly the fields of the type. The rest is written and the console names each item that was left out, like Add item does. - The same rule holds for typed list fields inside a struct variable and for lists inside typed items, at any depth. - A typed struct variable refuses a struct with a field the type does not have, and a value that is no struct. A struct with missing fields still merges in as before, so a partial Pack keeps working. - The check runs in the Variables node (own variables and Variables assets) and in the Properties node when it sets a behavior variable of another object. - Ports learn their declaration through GraphLookup: what a variable declares about its type, and which behavior owns a graph. The rule itself lives in the new src/core/graph/typedValues.ts, fitsType moved there from SetItem. - The List node gets a Type setting. With a type its items are shaped and marked, follow the struct asset, count when the type is deleted and offer Split into fields in For each. The mark never reaches the running game. - A type on a List node holding something other than structs is refused with a console line. - Setting the List node back to None removes the marks, unlike a list variable. A node list has no per-item type row, so marked items could never be freed there. Undo brings everything back. - tests/core/kinds.test.ts looked for the value as the first parameter of a literal. Type now comes first on the List node, so the test finds the value by its key. Tests: - Gate: 198 files, 2869 tests (2856 + 13), CHECK EXIT 0 - e2e 55: 19 checks (+55j write at runtime, +2 for 55k List node) - e2e 54: 16 checks, smokes 24 / 19 / 21 - Five mutations, each fails between 1 and 4 tests - e2e total 1606 is computed (1603 + 3), no full run Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> |
||
|
adminandClaude Opus 5.5
|
0c41cb97b1 |
Clip the children of an object to a clip area (#260)
An inventory grid could not scroll, because nothing could cut a child off at an edge. A game also had no way to hear the mouse wheel. Both are needed for a scrolling list, a dialog text or a window with more content than room. - A new object type Clip area has width and height and turns, scales and mirrors with its parent. The size gizmo drags width and height. - Everything below a clip area, on every level, is drawn only inside its rectangle, in the Scene view as in the game. Nested areas cut to their intersection. The rule works on a convex polygon, so a turned area cuts right as well. - On click, Is hovered and On mouse wheel do not hit a cut-off part. The Scene view does not pick it either. - In the Scene view the area is a dashed frame that is grabbed only at its edge, so a click inside lands on the content. The eye under Shape hides the frame. In the game the area is invisible. - While an object below an area or one of its parents is selected, the Scene view shows the cut-off part at 30 % opacity and it can be grabbed there. The rule lives in core/properties/clip.ts. - The Properties node knows the type Clip area. - The new event node On mouse wheel fires by the rule of On click. Its delta counts in notches, positive is down, and a frame's turns arrive as one value. It also gives x and y. Limits: - Only sprites and texts show the faded rest. Tilemaps and particles are cut and can be grabbed when open, but are not shown faded. - Masks by texture shape are out, as noted in the issue. Tests: - ./check.sh: 2773 tests, CHECK EXIT 0. - Full e2e run (local): ALL PASSED, 1549 checks, measured. - tests/core/clip-areas.test.ts: 12 tests for the cut rule, scene and game, save and load, hits, the wheel with and without owner, the notch conversion and the open rule. - e2e 58, 5 checks with real mouse and wheel: the scene cuts (74 of 74 red inside, 0 outside), a click on the cut part picks nothing, the selected rest is faded and grabbable, the game cuts, one notch logs 1. - e2e 04 and 46 count the object types and the eye rows. They now include Clip area. - Counter-checks: 6 in unit tests and 3 in the browser, all fail as expected. The originals were restored and checked with cmp. Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> |
||
|
adminandClaude Opus 5.5
|
ef2600493f |
Read the pixel size of a texture in a graph (#262)
A graph had no way to know how big a picture is. An icon sprite with a fixed size therefore stretched every icon of another size, an 8x8 pixel-art icon in a 16x16 slot was drawn twice as big. - New data node Texture size. It takes a texture, a frame or a pixel art and hands out width and height in pixels, 0 x 0 for none. Wired into a sprite's width and height, the picture shows pixel for pixel. - GraphLookup gets textureSize. The project answers it with the same pictureSize rule a sprite uses to size itself. Tests: - ./check.sh: 2749 tests, CHECK EXIT 0. - 2 catalog cases (a picture, no picture) and one test against a real project: pixel-art sheet, single frame, missing texture. - No e2e check and no counter-check for this node. Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> |
||
|
adminandClaude Opus 5.5
|
4e6aeb5f72 |
Query objects in bulk and filter, count or test a list (#259)
The object queries only ever returned one object: Object by name, Child by name and Find all stop at the first hit. Getting every coin, every child or every item that passes a test needed a For each with its own bookkeeping. These nodes return the whole set as a list of Object, so For each and Find can use item straight away. - Objects by name returns every scene object with that name in scene order. - Children by name returns every match below object, nearer levels first, the same order as the singular node. - Children returns the direct children, with recursive all of them level by level. - Objects of asset returns every instance of an object asset or container by the same rule as Is asset, spawned ones included. - All four take a snapshot. Destroyed objects are never in it, disabled ones are, as with the singular nodes. - Find has a Mode setting: First, All, Any and Count. First is the default and hides the row, so existing graphs look the same. - Match follows the mode of its paired Find: done with items and indices, done with any, or done with count. An unpaired Match shows First, since the pairing only comes from the wiring. - First and Any stop at the first hit, All and Count walk the list. - Changing the mode drops edges at outputs the Match no longer has, in one undo step. SetNodeParamCommand now cleans the whole graph, but only edges that were valid before the change. - The palette entry "filter" adds a Find set to All with its Match. Found on the way: - After adding the filter entry, "find" + Enter picked Filter. The entry has node type Find, counted as an exact hit, and the tie went to the alphabet. The search now ranks by the entry id. e2e 6z-v caught it. Tests: - ./check.sh: 188 files, 2746 tests, CHECK EXIT 0. - find-modes.test.ts with 11 tests, 11 catalog cases for the four nodes, the asset input guard now expects 3. - e2e 6z-vii with 3 checks: filter from the palette, Count picked in the inspector drops the items edge, a run logs 2, 2, 2, 3, 4, "0, 2". - GM_STEPS=1-6: all passed, 278 checks. - Counter-checks fail as expected: every mode stopping early (2), Match ignoring the mode (6), cleanup on the own node only (1), no recursion (2), no inOrder (2), old ranking (1). In the browser a Match ignoring the mode fails both editor checks. Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> |
||
|
adminandClaude Opus 5.5
|
2aaca01929 |
Find the first matching item with a Find … Match block (#255)
Searching a list with For each needs the test result wired back into break on the left of the loop node. The wires then run across the node and the graph reads badly. Find … Match keeps the whole search flowing left to right, while the test in between stays a free graph. - Find takes exec and list and offers item and index. It sets them to each element in turn and has no exec output of its own. - Match reads its bool input match once per element. The first true value continues at found with item and index of the hit. No hit or an empty list continues at not found with an empty item and index -1. - The pair is derived from the wiring and stored nowhere. A Match belongs to the Find whose item or index its test is built from. Copy, paste and undo therefore need no extra code (findBlock.ts). - An unpaired Find or Match, two Matches on one Find and a Match fed by two Finds show a warning on the node. At run time the flow ends at an unpaired Find and the console says so. - Adding Find from the palette places its Match 480 px to the right in the same undo step. - The graph draws a quiet frame behind Find, Match and the nodes of the test. Literals feeding the test from outside stay outside the frame. - The test consists of data nodes only, like the break of For each. Tests: - ./check.sh: 184 files, 2694 tests, CHECK EXIT 0 - e2e GM_STEPS=1-6: ALL PASSED, 272 checks - New find-match.test.ts with 12 tests, 2 catalog cases, e2e 6z-v with 3 checks using a real mouse. - Counter-checks: ignoring the test fails 4 unit tests, no ambiguity check fails 2, framing everything fails 1. In the browser, no frame and no Match from the palette each fail their check. - Check total in README: 1517. Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> |
||
|
adminandClaude Opus 5.5
|
b90b62886b |
Put one item into a list, a struct staying whole, with Add item (#250)
A list could only grow through Join lists, and that takes its b apart: a struct becomes one item per field and a list is joined. A list of structs such as loot could not grow at all. - Add item returns a new list with value as exactly one more item. A struct or a list goes in whole. The list that came in is left alone, like with Set item. - index -1 or unset appends. Otherwise the item goes in before that index. An index outside the list appends, so the value is not lost. - The rule that an item takes the kind of its slot moved out of Set item into fitToSlot. Both nodes use it, Set item behaves as before. - No e2e check and no browser look. The node is covered by unit tests. Tests: - ./check.sh: 180 files, 2634 tests, CHECK EXIT 0 - 7 catalog cases, 4 cases in list-of-structs.test.ts, and index in the whole-number inputs of texture-kind.test.ts - Counter-check: taking the value apart like Join lists fails 3 tests - This commit alone: tsc and the three touched unit files pass (337 tests) Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> |
||
|
adminandClaude Opus 5.5
|
cb8a2d029a |
Loop over a list and stop at the first match with For each (#249)
Finding the first item that matches took Count, Repeat, Item at and a Branch, and the loop could not stop once it had found something. A graph has no lambdas, so the predicate is an input that is read every round. - For each runs body once per element, with item and index set, and goes on at done. - Its break input is read anew before every round, after item is set. Once it is true the loop ends there and that round's body does not run. - done sees the matching item and index with stopped true. Without a match it sees no item, index -1 and stopped false, the OrDefault. - RepeatResult has optional items, stopWhen, stopped and exhausted. GraphInterpreter.loop reads them, Repeat runs as before. Tests: - ./check.sh: 180 files, 2623 tests, CHECK EXIT 0 - e2e GM_STEPS=1-6: ALL PASSED, 269 checks - 5 interpreter tests in graph.test.ts, 2 catalog cases - e2e 6z-iv: the palette creates the node, and a search for Name == "Gold" in Axe, Gold, Bow, Gold logs "1true" - Counter-checks: without the break check 2 unit tests fail, and with break not read over its edge 6z-iv fails - This commit alone: tsc and the three touched unit files pass (349 tests) Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> |
||
|
adminandClaude Opus 5.5
|
393b8ec7f9 |
Build your own easing curve and use it on keys and Lerp (#247)
The built-in eases cover the usual shapes, but a game often wants its own: a coin that bounces twice, a door that overshoots and settles. A new asset type holds such a curve, and keys and the Lerp node can pick it instead of a built-in ease. - New asset type "curve": points like in Vector art, x is t and y is the value. A new curve is the straight line from (0, 0) to (1, 1). - One pure evaluation in src/core/model/curve.ts serves the timeline preview, the running game and the Lerp node. - The curve always has one value per t. The end points stay at t 0 and 1, points cannot pass each other, and a handle that reaches past its neighbour is shortened along its direction. Loading a hand-edited file applies the same rules. - Curve tab: click on the line to insert a point that keeps the shape, click on free space to put one there, drag points and handles, double-click or Delete removes, Alt-click toggles round and sharp. Every step is one undo step. - Presets: all 30 built-in eases plus Linear, fitted with adaptive subdivision. Each stays within 0.4 % of the built-in ease. - Preview: a dot runs along the curve once a second, a second dot shows only the value. The Preview button stops it. - Animation keys get "Curve" under Easing with a curve picker. Lerp gets "Curve" under Ease, and its result may overshoot b. - A missing or unpicked curve runs linear. The inspector says so, the node shows it as a problem, and deleting a used curve warns with the number of keys and Lerp nodes. Tests: - ./check.sh: 180 files, 2612 tests, CHECK EXIT 0 - GM_STEPS=1-6,25,53: ALL PASSED, 309 checks - New e2e module 53 with 13 checks, all with the real mouse. Expected values come from its own Bezier evaluation. - Counter-checks bite: without Bezier evaluation 4 unit tests fail, without handle clamping 2. In the browser, a key that cannot find its curve, a click that sets no point and a handle drag that moves the point all turn checks red. Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> |
||
|
adminandClaude Opus 5.5
|
320d3e27e1 |
Add a Lerp node that blends from a to b with an ease (#246)
Every animation in a behavior had to build its interpolation from Subtract, Multiply and Add, once per axis. The gold pickup in "Garden of Sacrifices" needed about 30 nodes for that alone. A single Lerp node with an ease makes those chains one node each. - Lerp has the inputs a (default 0), b (1) and t (0) and the output result. It sits in the data category next to Clamp. - The Ease setting offers Linear, In, Out and In-out, all quadratic. The node row shows it as "Ease: Out". - t is held in 0..1. A timer that overshoots in the last frame still lands exactly on b. Tests: - ./check.sh: 178 files, 2583 tests, CHECK EXIT 0 - 7 new cases in the node catalog test. Without the clamp on t, 2 of them fail. - e2e 6z-iii (2 checks): typing "lerp" in the palette adds a linear Lerp, and picking "Out" in the inspector reaches the node and its row. GM_STEPS=1-6: ALL PASSED, 267 checks. - README check sum is 1459, computed, not counted. Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> |
||
|
adminandClaude Opus 5.5
|
483c34bb5c |
Let Destroy keep the children and hand them back as a list
Destroying a container used to take everything below it along. Now Destroy can remove just the object itself and pass its direct children on, so a behavior can keep working with what was inside. - New input keep children (bool, default off). When on, only the object goes. Its direct children move up to the object's parent, or to the top level if there is none. Grandchildren stay where they are. - New output children (object list) with the direct children that were kept. It is empty when keep children is off. - The children keep their place on screen. carriedTransform folds the destroyed object's position, rotation and scale into their own, the same as reparenting in the editor. - Behaviors and the rigidbody of the object are always destroyed with it and are not in the list. Moved up they would steer or simulate the parent. - World remembers which children it reparented, and syncToModel writes their new parent into the scene. A reload of the model keeps it. - Limit, read from the code only: in the editor run the contents of a placed container are not baked. Moved children there last for the run only. Tests: - ./check.sh: 170 files, 2478 tests, CHECK EXIT 0 - e2e 34 (the module with a Destroy node): ALL PASSED, 21 checks - world-sync: world matrix of child and grandchild unchanged under a rotated and scaled parent, parent survives syncFromModel, top level case, already destroyed object gives [] - destroy-keep-children: real graph Destroy(Owner) -> Log(children) logs Lid, Label without the grandchild Nail - 3 counter-probes, all caught: no world transform (1 test fails), no parent in the scene (1), behaviors and rigidbody moved up (2) Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> |
||
|
adminandClaude Opus 5.5
|
7979b8ff19 |
Let structs and lists hold objects across behavior runs (#238)
An object could only live in a dedicated object variable, kept in slots
beside the variable bag. Struct fields and list items could not hold
one, so a spawned object packed into a struct or list was lost. This
replaces the slots with one mechanism for all three places.
- "No object" has one resting form everywhere: {"$object": ""}. A
running game can tell an object slot from an empty text that way.
- During play the object handle lives directly in the value, also
nested in structs and lists. objectSlots.ts and the special paths for
Keep and Properties are gone.
- liveObjects.ts strips objects to (null) at every exit: overrides the
editor run writes back to the scene, saved values of persistent
Variables assets, live values in the inspector, and the world
snapshot of the test hooks (objects as names there).
- A destroyed object reads as (null) through isAlive, alone, in a
struct field or as a list item.
- "+ Field" and "+ Item" offer Object. The inspector and the list tab
show a fixed (null) row without input.
- Lists from Raycast all stay objects when written to a variable.
Before they turned into names.
- A struct that only changes by an object writes no override. A list
that grows by an object writes [(null)], its length really changed.
Found on the way: CI at
|
||
|
adminandClaude Opus 5.5
|
923baf2557 |
Let Spawn take an asset over an edge and find a child by name (#237)
An asset could only be picked as a setting on the Spawn node. It could not be wired in, held in a variable or put into a list. Finding an object below the own one needed a scene-wide search by name. - "Asset" is now a kind like Animation or Sound: port, variable, list item and a new "Asset" literal node, with its own cube icon. - Spawn and Is asset have an `asset` input. It uses the key of the old setting, so a saved asset reads as the value of the input and older projects keep spawning without a migration. - New node "Child by name" searches below an object level by level. A child wins over a grandchild of the same name. Nothing found or no object gives null. Tests: - ./check.sh: 168 files, 2453 tests, CHECK EXIT 0. - 9 new unit tests in tests/core/asset-kind.test.ts, catalog cases for Spawn, Is asset, Child by name and the literal. - e2e 6z-ii (2 checks): node rows and a real drag of the literal onto `asset`. e2e 6: 119 checks passed. Spawn checks in 3 and 9 passed. - Counter-checks: depth-first search fails 1, Spawn reading only the old setting fails 3, runtime ignoring the parent fails 1. Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> |
||
|
adminandClaude Opus 5.5
|
454d202109 |
Let each variable of a behavior choose whether calls keep it (#229)
The first version of #229 put a Keep state switch on the Run behavior node. The user wanted it where the variable is declared instead. Whether a value lives on belongs to the variable, not to every call site. - The node switch keepState is gone again. RunBehavior, CallResult and nested.ts are back to what they were before #229. - BehaviorAsset.keptVariables lists the kept names. It lives on the asset and not in PropertyDef, because that is the schema of every inspector row. - A variable added from now on starts with Keep on. Variables in existing projects start with Keep off, so old projects run unchanged. - SetVariableKeptCommand flips the switch as one undo step. Add, remove and rename carry the list along. Loading drops names that are not declared. - The interpreter keeps only the listed variables, per Run behavior node and per object as before. The others start at their defaults. - Local state machines in a called behavior start empty on every call again, as before #229. Global and scene machines are unchanged. - The inspector shows a Keep button in each variable row of a behavior. Its state is part of the asset signature, so a click redraws the row. Without that the button kept its old look until the inspector was reopened. Found: the project Garden of Sacrifices still has keepState = true on the call Player -> Character Movement. It is ignored now. Direction there predates the switch, so Keep is off until set by hand. Tests: - ./check.sh: 163 files, 2392 tests, CHECK EXIT 0 (before 2388) - tests/core/keep-state.test.ts rewritten, 15 tests - e2e 19: ALL PASSED, 35 checks. 19c-ii now clicks the Keep button of a new variable: on when added, off by a click, on again, off after undo. - Counter-checks, each fails its own test: keep list ignored (2), states kept (1), new variable not kept (8), rename drops the list (1), no Keep button (e2e 19c-ii). Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> |
||
|
adminandClaude Opus 5.5
|
7c70245c79 |
Let a nested behavior keep its variables between calls (#229)
A Run behavior call started with fresh variables every time, so a nested behavior could not count, remember or keep a local state machine across calls. A new "Keep state" switch on the node lets the callee resume where its last call left off. It is off by default, so existing projects run unchanged. - RunBehavior gets the boolean parameter keepState and its node description explains it. - GraphInterpreter keeps the state in keptCalls, keyed by the call path, the chain of Run behavior nodes. Two nodes calling the same behavior each keep their own state. - One interpreter exists per behavior instance, so every object gets its own state without further code. - Local state machines of the callee are kept like its variables. - resumedVariables() matches kept values against today's declarations. A new variable starts at its default, a removed one drops out, and one whose kind changed starts over. - The kept state lives as long as the object in the run. It is not written to save games. Limit: a callee input named keepState collides with the switch. The same already holds for the name behavior, so it is not caught. Tests: - ./check.sh: 163 files, 2388 tests, CHECK EXIT 0 (before 2377) - 10 new unit tests in tests/core/keep-state.test.ts and 1 new node catalog case. - e2e 19: ALL PASSED, 35 checks, with the new check 19c-ii for the checkbox, its click and undo. - Counter probes: ignoring keepState fails 5 tests, state per behavior instead of per node fails 1, dropping the outer path fails 1, skipping the kind check fails 1, and without the node parameter the e2e check fails. Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> |
||
|
adminandClaude Opus 5.5
|
5dbac3a8df |
Add a Select node that picks one of two values by a condition
Choosing between two values meant a Branch with the whole action twice behind it, for example two Play animation nodes that differ only in the animation. Every later change had to be made in both. Select picks the value, so the action stays single. - Select is a data node with the inputs condition, false and true and the output value. It passes on "true" if the condition holds, else "false". An unconnected condition counts as false, and an empty picked input gives null. - The ports are named false and true, not a and b, so nobody has to guess which input is which. The order false, true follows Unreal's Select and Blender's Switch. - false, true and value share one type through `sharedType`, like First not empty. With two Animation literals plugged in, value takes their type and fits Play animation directly. - Both inputs are always evaluated. Data nodes have no side effects, so that does not matter. Tests: - ./check.sh: 160 files, 2363 tests, CHECK EXIT 0 (before 2356). - 5 cases in tests/core/node-catalog.test.ts and 2 in tests/core/shared-port-type.test.ts. - Counter checks: with the inputs swapped all 5 catalog cases fail, without sharedType exactly the type test fails. - No e2e change, the sum stays at 1380. Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> |
||
|
adminandClaude Opus 5.5
|
5bf1ee7a4e |
Let Equals match a number against a typed number like 130 (#224)
The float tolerance from the last commit never reached the case it was built for. The inputs of Equals are of type any, and their inline field is a text field. A typed 130 therefore arrives as the string "130", and the tolerance only applied when both sides were real numbers. The node fell back to comparing "129.99999999999997" with "130" as text. - A number against a text that parses as a number now uses the same 1e-9 rule as two numbers. - An empty text does not count as 0. - Two texts are still compared as text, so "1.0" and "1" stay different. - Compare was not affected, its inputs are real number fields. Tests: - 3 new cases in node-catalog.test.ts: 129.99999999999997 vs "130" is equal, 0 vs "" is not, "1.0" vs "1" is not. - Counter-check: with the old rule (two real numbers only) exactly the "130" case fails. Original restored and compared with cmp. - ./check.sh: 156 files, 2314 tests, CHECK EXIT 0 (before 2311). Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> |
||
|
adminandClaude Opus 5.5
|
9d6a0aebd3 |
Let Compare and Equals treat float noise as equal numbers
A graph that checks "time - late == 6" after On timer (#224) failed, because the difference comes out as 5.999999999999972. Both values are sums of measured frame times, and they round along different paths. The only workaround was a Round node in front of every comparison. - New helper nearlyEqual in values.ts. Two numbers count as equal when |a - b| <= 1e-9 * max(1, |a|, |b|). The tolerance grows with the size of the values, so it holds for hours of summed dt. - Compare uses the rule for all six operators. "<" and ">" only hold when the values are not nearly equal, "<=" and ">=" also hold when they are. So "==" and ">" are never true at the same time. - Equals uses the same rule when both inputs are real numbers. Objects still compare by identity, everything else as text. The node description says so. - The tolerance is fixed, there is no parameter on the node. Physics values come from float32 in Rapier and are not covered on purpose. - The log display is unchanged and still prints the raw number. Tests: - ./check.sh: 156 files, 2311 tests, CHECK EXIT 0 (before 2300). - 11 new cases in node-catalog.test.ts, including the value from the log against 6, growth with magnitude, 6.001 != 6 and 1e-6 > 0. - Counter-check exact compare: exactly the 8 noise cases fail. - Counter-check "<"/">" without the exclusion: exactly 2 cases fail. - No e2e change, the check sum stays at 1374. Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> |
||
|
adminandClaude Opus 5.5
|
d444b27fae |
Let behaviors read and set tilemap cells while the game runs (#135)
A behavior could move sprites around but had no way to look at or
change the tilemap it was standing on. Doors, breakable blocks and
"is there ground ahead?" checks all need that.
- New nodes Tile at, Set tile, World to cell and Cell to world. The
conversion honours position, rotation, scale and mirroring of the
placed map. A small Tile literal node lets a graph compare what it
read against a fixed tile.
- The layer is picked by name from all tilemap layers in the project
through a new field kind. "First layer" takes the map's first one.
Because layer is an input, a text can also be wired in.
- Each placement keeps only its edited cells in liveTilemap.ts,
layered over the asset's cells. A second placement of the same map
stays untouched, and the asset itself is never written.
- A read sees a Set tile from earlier in the same flow. Drawing picks
up the edit at once and neighbouring autotile edges adapt.
- Solids see the edits straight away, so a Move in the same frame
already hits the new cell. Rapier rebuilds its shapes on the next
step.
- After Stop the map is back to what was painted. The editor run shows
the edit in the scene view while it lasts and does not touch the
project.
- An unwired tilemap input means no map, like Get position. Cells
outside the grid are refused and done reports false.
Tests:
- ./check.sh: 155 files, 2271 tests, CHECK EXIT 0 (before 2245).
- tests/core/tile-access.test.ts (14), one physics test for a floor
set at runtime, catalog entries for the five nodes.
- e2e 39,40: all passed, 86 checks (before 81), five new in 40s.
- Counter-checks: collision ignoring edits fails 3 unit tests, the
solids cache missing same-tick edits fails only the "at once" test,
drawing ignoring edits fails the 2 drawing checks, the editor run
not reporting a new tile fails only its check.
- 40s uses a still tile. The animated fixture tile redraws every frame
and hid the last counter-check at first.
- Check total 1351 + 5 = 1356, computed. CI confirmed 1351 at
|
||
|
adminandClaude Opus 5
|
1a3babf9c5 |
First not empty gets a setting for what counts as empty (#206)
The node treated 0, false and an empty text alike, which is right for a missing behavior parameter but wrong the moment a real 0 travels through the graph. A setting now says how much counts as empty, so the same node works for both cases. - The new parameter "Empty means" has three steps: "Any empty value" (the default, the behaviour so far), "Nothing there (0 and false count)" and "Only a missing value". - The default keeps every existing graph as it is, including the common setup where an unset animation parameter arrives as an empty text. - The rule lives in isEmptyValue(value, mode) in values.ts; the node only passes the step through. An unknown setting behaves like the default, the same way Compare does. - The node description is shorter because the old one was cut off in the inspector. Findings: - In the "Nothing there" step a struct is empty only when its fields are empty under the same step, so a position (0, 0) stays a real value. Tests: - ./check.sh: 142 files, 2113 tests, exit 0 (before 2104). - 9 new cases in the node catalog table: the edge cases per step (0, false, empty text, empty list, position (0, 0), unconnected a) plus an unknown setting. - Two counterproofs hold: letting "Nothing there" act like "Any" drops the 3 cases with 0, false and the position; removing the "Only a missing value" step drops the 2 cases with the empty text and list. - Seen in the browser: the node shows "Empty means: Any empty value" and the inspector dropdown lists all three steps. Co-Authored-By: Claude Opus 5 <noreply@anthropic.com> |
||
|
adminandClaude Opus 5
|
d98c2898b1 |
A new node takes the first of two values that is not empty (#205)
A graph that reads an optional value needed a chain of Equals and
Branch just to fall back on a default. The new node does that in one
step: it passes a through unless a is empty, in which case b comes
out. Both ports are any, so it works for numbers, text, lists,
structs and objects alike.
- `First not empty` sits in the data category with two any inputs
`a` and `b` and one any output `value`. Are both empty, b comes
out, so the second input doubles as the default.
- `isEmptyValue` in values.ts holds the rule as a pure function:
nothing connected, 0, an empty text, false, an empty list, and a
struct whose fields are all empty.
- The struct case is what covers a position: behavior graphs have no
vector type of their own, so (0, 0) arrives as a struct. `{x: 0,
y: 2}` therefore counts as set, `{x: 0, y: 0}` as empty.
Findings:
- A real 0 or false on a is passed over. That follows from counting
0 as empty and is written down in the issue.
- The output stays any. Ports that inherit their type from an input
do not exist in the graph; `Item at` has the same shape.
Tests:
- ./check.sh: 142 files, 2104 tests, exit 0 (was 2094).
- 10 new catalog cases: a set, a unconnected, 0, "", false, an empty
list, a position (0, 0), a struct with one field set, an object,
and both empty.
- Counter-check: with structs never empty and 0 a real value exactly
those two cases fail, the rest stays green. Originals restored and
compared with cmp, then rebuilt.
- No e2e check: single data nodes have no e2e coverage here, the
palette fills itself from BUILT_IN_NODES.
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
|
||
|
adminandClaude Opus 5
|
3427f84a55 |
A game can pause itself and set its own time scale (#167)
Until now only the editor toolbar could pause a running game. A pause menu inside the game had no way to stop the world while its own graph kept running, and there was no slow motion. - Five new nodes: Pause game, Resume game, Is game paused, Set time scale and Time scale. Pause and resume take effect on the next frame. - A game pause stops world time, physics, animations, particles and shader time. Only behaviors with the new "Run while paused" switch keep running. - Set time scale 0 freezes the world but graphs keep running, as agreed in the issue. - Play and Stop reset the time scale to 1, Load scene keeps it. The pause belongs to the scene, so Load scene and Restart unpause. - The toolbar pause stays separate and also freezes the menu. When the game pauses itself the status line reads "The game paused itself". - While paused, collision events are not reported, sounds keep playing, and the editor run ignores both nodes with a log line. Findings: - The first status line was longer than any before and got cut with an ellipsis. It is shorter now. - The e2e harness did not know the key "p". It does now. Tests: - ./check.sh: 133 files, 1968 tests, exit 0 (before 132 / 1952) - npm run build: exit 0 - GM_STEPS=18 fresh: ALL PASSED, 33 checks (before 26) - 16 new unit tests: 8 catalog cases, game-pause.test.ts, editor run - 7 new e2e checks in block 18i, driven by real keys in the game - Six counter-checks all bite: behavior filter, collision lock, world time, editor run, clock reset and the game clock in the browser - Check total 1217 in README is computed (1210 + 7), CI measures it Co-Authored-By: Claude Opus 5 <noreply@anthropic.com> |
||
|
adminandClaude Opus 5
|
ffdf0a8ddb |
The new node "Raycast all" answers with every collider along the ray instead of only the nearest one: it carries the same inputs and settings as Raycast (Ignore owner, Hit triggers, Layers from #158) plus "max hits" where 0 means all, and it hands back parallel lists sorted by distance - objects, colliders, points x/y, normals x/y, distances - next to count, so index i of every list speaks about the same hit; a collider counts once no matter how many convex parts its shape is built from, while a tilemap counts per cell it is hit in, and the filter sits in Solids.raycastAll like the one of #158, the one path the editor run and Play both take, so all 12 new unit tests run through describe.each against both systems; the node needed the value system to learn something it could not do - a graph list carried numbers, text, booleans and bundles but no object handles, asList turned an object into its name, so objects/colliders would have been lists of names, which loses the object when two carry the same name, and collider children usually do; Value now knows a travelling list that may hold handles and "Item at" gives such an item out as an object, ready for Destroy, Apply force or Name of, while the single door into a stored file - writeTyped/asTypeOf - runs the list through the new storedList() so every object becomes its name again and nothing living reaches a project file, which is its own unit test over JSON.stringify; three list nodes follow the handles: "Index of" compares objects by identity because a name is not the object of that name, "Set item" and "Fill" write an object as an object, and "Join text" prints the names instead of the innards; this decision was mine to make because the question ran into the MCP timeout - the alternative was a list of names plus "Object by name", which is the smaller change but lossy; 4 new e2e checks in the new block 43e (shield and floor in one go reading 2 and "145, 280", the second object answering to its name, which only a real object in a list can do, "max hits" 1 stopping at the nearest, and the node showing the row) and 18 new unit tests, 12 in raycast.test.ts, 4 on the value system and 2 in the node catalog; two counter-checks hold: not counting tilemap cells one by one drops 2 unit tests, and answering with the nearest hit only drops module 43 with 2 FAILs; one finding on the way - the node read "maxHits" while every other input carries a spoken label, because int() took the key as its label, so it has a third parameter now, and the e2e check caught that, no unit test did (#157)
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com> |
||
|
adminandClaude Opus 5
|
6a31f5e0ad |
One-way platforms, raycast and collision stay with contact data: a collider can be one-way with a side it blocks from (turning with its object, drawn thick in the scene view) and a tile can be one-way from above, one-way cells never merge with solid tiles, a contact blocks only when its normal is within 45 degrees of the blocking side, the new node Ignore one-way lets an object drop through for a while, and it all holds for Move and for dynamic bodies in Rapier, where the decision is made before each step because the hook may not touch the engine (#155); the new Raycast node answers hit, object, collider, point, normal and distance in our own f64 geometry, the same in editor run and play, and the editor run draws each ray for 0.25 s (#153); On collision stay gains an interval with its own clock per pair, and stay and enter gain the contact point next to normal and impulse (#149); fixes that every Rapier collider of a tilemap had the shape of its last cell
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com> |
||
|
adminandClaude Opus 5
|
1b5e386b60 |
Move with collision reacts along the contact normal: it travels to the surface, stays flush and slides the rest of the move along it with Coulomb friction (the mean of both colliders, a tile counts as 0.5), a circle now rolls over an edge instead of catching on it, pushed dynamic bodies move off along the normal, Move gains the outputs hit, normal x and normal y, an object without its own collider moves freely, and editor run and play share the same path through Solids; contact point and normal come from our own f64 geometry (contactBetween), because Rapier's castShape lands 3e-6 px inside the wall in f32 (#150)
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com> |
||
|
adminandClaude Opus 5
|
0ff3c8b742 |
Physics stage 1b: six new nodes act on dynamic bodies in play (Apply force over the frame, independent of the frame rate, Apply impulse, Set velocity, Set angular velocity, Get velocity, Set gravity for the rest of the run), a node on an object without a dynamic body and moving a dynamic body directly each log a hint once per object, and Move with collision now pushes dynamic bodies with a mass-dependent push while the mover stays flush; Move keeps its own move-and-slide instead of Rapier's character controller, which measurably snags on seams between colliders (#147)
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com> |
||
|
adminandClaude Opus 5
|
4ed2edd0f0 |
An animation is a value a graph can pick, and playing a running one makes it win again (#97)
Play, Pause and Stop animation take the animation on a port instead of a fixed setting, fed by the new Animation literal or a list item tagged `$animation`. Playing an animation already running keeps its frame but counts it as started last, so turning back to a walk that never stopped shows that walk. The actor demo walks through one Play animation over `ItemAt(walk, facing)` again and stops every animation to stand. Co-Authored-By: Claude Opus 5 <noreply@anthropic.com> |
||
|
adminandClaude Opus 5
|
193378e6a9 |
An animation is a timeline of rows over one asset, played on an object rather than worn as a picture (#97)
Part (a) of the animation rework: model, commands, saving, runtime and nodes. - AnimationAsset holds a root (sprite, text, container or scene) and rows; a row keys one property of the root or of an object inside it, keys sit on whole frames. - The last key decides the length (its frame counts as a frame of its own). The playhead runs between frames, so numbers and colors blend every tick even at 10 fps; everything else holds. - Playback gains `once-reset`, which puts back what was there before the start. A row can be relative, adding to where its target stood. - Play / Pause / Stop animation act on an object; each instance plays on its own, the later start wins on a shared property, and a behavior writing the same property still writes last. - A sprite no longer wears an animation through `texture`. "Create animation from texture" builds a sprite plus a texture row keyed frame by frame instead. - The Animation tab shows a placeholder until the timeline editor (part b) lands. Co-Authored-By: Claude Opus 5 <noreply@anthropic.com> |
||
|
adminandClaude Opus 5
|
1135205d69 |
A machine that arrives as a value can still be commanded, so a name may name its state (#58)
game-maker / suite (push) Successful in 6m12s
Set state and State branch derived their ports from the graph, so a machine that came out of a variable or a list had no ports at all: nothing to set, nowhere to branch. It could be passed around but not operated. stateByName() resolves id first, then name; a name two states carry answers with nothing, the same rule transitionTo already follows for two transitions of one name — without something in the graph that decides between them, any pick would be a guess. Set state by name takes the machine and a text, and has a second exec output not found, so a typo is not swallowed in silence. State branch gains a derived else that fires whenever no state output matches — no state set, a state of another machine, or a machine that arrives as a value and therefore has no state outputs at all. A flow that enters State branch now always leaves it somewhere. Co-Authored-By: Claude Opus 5 <noreply@anthropic.com> |
||
|
admin
|
1e9d21cd5d |
A game that is more than one scene needs a way from one to the next, so the graph can load one (#39)
game-maker / suite (push) Failing after 11m6s
Load scene sets a flag on the World like Stop and Restart do; the swap happens after the tick, and the last wish of a tick wins. Exactly one thing crosses over: the SharedState, so global variables and global machines keep what they know while everything local is built anew. Loading the scene that is already running rebuilds it, which is what "reset the level" means when the score must survive. A run starts either from the start scene (a new project field, set from the asset panel and marked with an arrow in the list) or from whatever scene is open. The toggle next to Play says which question is asked and remembers the answer in localStorage: it is a way of working, not part of the game. Sounds no longer end because a scene ends. A voice belongs to the behavior that started it and stops right after On destroy, so the scene swap is no longer a special case at all. For the enemy that plays its explosion and destroys itself in the same breath there is now a detached input on Play sound. The scene selector stays usable while a run plays, because a double click in the asset panel already did the same thing unguarded. It moves what the editor looks at, not what the run plays. |
||
|
admin
|
5671a38044 |
A game that stays silent is only half a game, so a sound is an asset like any other (#45)
game-maker / suite (push) Successful in 12m1s
Sounds follow the road fonts already paved: the file goes to the server content-addressed under its sha256, the project keeps a named asset that points at it, and nothing is ever re-encoded. The format is read from the file's own signature, not from what the browser claims - the same .m4a arrives as audio/mp4, audio/x-m4a or as nothing at all. Playing is two nodes. "Play sound" takes the asset and may raise or lower its volume; every call is its own voice, so two jumps in a row are two jumps heard. Its loop input is a choice of three - from the asset, on, off - because a checkbox has to spend one of its two positions on "not set" and would lose a case: an asset that loops could then never be played once. Below the graph core stays browser-free: NodeContext hands out an asset id, BehaviorSystem resolves it against the project and folds the asset's own volume and loop into the call, and only viewport/SoundLibrary knows about Web Audio. A run without a sink plays nothing instead of throwing. The CI browser is muted, so the ear is no witness: the debug hook counts started and stopped voices, and step 34 reads that counter. |
||
|
adminandClaude Opus 5
|
7babf88636 |
A state change is something the graph can react to, so the machine announces it (#53, #54, #55, #57)
game-maker / suite (push) Successful in 10m58s
Four issues that all reach for the same line: how the current state is read and written. Splitting them into four commits would mean four states of the tree that do not compile, so they arrive together. #55 start state — the machine asset carries an optional `start` holding a State node's id. Right-click a state to set or remove it, a ring in the node's title says which one it is. A dead id (the state was deleted) reads as "no start", so nothing has to clean up after a deletion. #53 entered/exited — `On state entered` and `On state exited`, one exec output per state. Every change now goes through a single `setState` that reports it; BehaviorSystem delivers it after the exec flow that caused it, `exited` of the old before `entered` of the new, round after round until the queue is empty, with a cap that stops a ping-pong graph with an endless-loop error. A local machine tells the instance that switched, a global one tells every instance holding a matching event node. The start state fires `entered` too: per instance for a local machine, once per run for a global one. #57 reading — `Current state` with `name` for showing and `id` for comparing, `Is in state` with one boolean per state. Neither has a `run`, so `read` learned `def` and `lookup`, and the catalog test knows this third kind of node. #54 seeing it — during a run the state machine tab marks every state some instance is holding faintly, and the one held by the selected scene object's instance strongly. Co-Authored-By: Claude Opus 5 <noreply@anthropic.com> |
||
|
rootandClaude Opus 5
|
68c92daaa6 |
A transition carries a name, so a state needs no visible port (#52)
game-maker / suite (push) Successful in 10m22s
A state keeps its `in`/`out` exec pins in the model and the editor never draws
them. That is the whole trick: connecting, undo, deleting a state and saving all
keep working untouched, because `normalizeGraph` filters nodes and never edges,
and no edge ever checks its port key against a NodeDef. Only two places change --
`NodeView.redraw` stops drawing the row, and `portAt` refuses to hand one out, so
an invisible pin cannot be grabbed either.
Transitions are drawn by right-clicking a state, `Make transition`, then clicking
the target. The armed mode takes the same shape as a live drag, so the existing
preview draws it with no second code path, and it dies with Escape, a click on
empty canvas or a switch to another asset.
Removing the pins removed the only handle a transition had: edges have no
hit-test anywhere, and the pin right-click was the sole route to Disconnect.
The inspector's TRANSITIONS OUT / TRANSITIONS IN lists are therefore not a
convenience, they are the delete path.
`GraphEdge` gained an optional `label`, which `normalizeGraph` has to pass
through explicitly or a saved name is dropped on load. `State transition`
replaces `Next state`: it takes the machine on an input port and the name from a
picker, and resolves against the *current* state. Names are deliberately not
unique across a machine -- two states may both have an `alarm` -- so a node named
`alarm` moves whichever state has one, and an empty name follows the single
unnamed edge.
The geometry moved to a Pixi-free `transitions.ts`: a gap to the box border, and
a fan that puts a pair of opposite edges beside each other instead of on top of
each other. Keeping it as plain maths is what let a screenshot bug become a unit
test -- an earlier pin-to-pin line ran under the target node and took its
arrowhead with it, because `nodeLayer` sits above `edgeLayer`.
One limit stands and is not fixed here: `ConnectCommand` rejects a second edge
between the same two states ("Already connected"), because every transition
hangs off the same two ports. With names, `A --alarm--> B` beside
`A --seen--> B` is a sensible pair, so this is worth its own issue.
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
|
||
|
root
|
0f9e1611d1 |
A particle is a function of its age, not a thing that is stepped (#73)
game-maker / suite (push) Failing after 4m22s
The asset type `particles` is placeable and carries a graph at the same time — `behavior` was the blueprint. Because a continuous emitter gives birth to particle n at time n/rate, the whole field is a function of the clock rather than of the frames: no ring-buffer bookkeeping, exact time jumps, reproducibility as a measurable property. compile.ts follows compileShader's frame but emits JS closures into a Float64Array instead of GLSL, and without eval; a node with two consumers is evaluated once. Drawing is one Pixi ParticleContainer per source, so one draw call. Collision, wind and braking in flight are out for good — that is the price of the formula model, not an omission. The tab count goes from nine to ten, which is exactly the case #84 was built for one day earlier: at 1280 px the row no longer holds every tab, so guard 14b now asks for hidden.length > 0 instead of === 0. |
||
|
rootandClaude Fable 5.1
|
6141d07d4f |
Behavior lifecycle: On enable, On disable and On destroy events (#42)
game-maker / suite (push) Successful in 7m29s
Order per instance: On start -> On enable -> On update ... -> On disable -> On destroy. On enable fires right after On start and whenever the behavior comes back on (itself and its parents); On disable in the frame it goes off, the instance stays frozen. On destroy fires when the entity leaves the world (Destroy node, child of a destroyed object) and when the world is torn down on stop/restart, preceded by On disable if still on. A new On start node added while playing still does not fire for a running instance (kept as is, documented in the wiki). Co-Authored-By: Claude Fable 5.1 <noreply@anthropic.com> |
||
|
rootandClaude Fable 5.1
|
e7d82bd1a9 |
State machines: asset, tab, State branch and Set state nodes (#51)
A state machine is an asset whose graph holds one `State` node per state (no ports, name as title), edited in a new "State machine" tab that reuses the graph canvas: right-click places "State n", snap toggle shared with the Behavior tab via SnapToggle. `statemachine` is a value kind like texture (port, literal node, variable, struct field, tagged list item). Behaviors use it through `State branch` (one exec output per state) and `Set state` (one exec input per state; the interpreter now hands `run` the entry port). States live per behavior instance in NodeContext.states, with no initial state. Ports derive from the inline picker or a wired `State machine` literal; BehaviorLookup became GraphLookup with behavior(id) and machine(id). The Graph tab is labelled "Behavior" (key unchanged). Unit tests (state-machine, kinds, catalog, ports), e2e step 26 and README added. Co-Authored-By: Claude Fable 5.1 <noreply@anthropic.com> |
||
|
rootandClaude Fable 5.1
|
6471671f7d |
Refactor round: ship web/index.html, drop the remote browser, fix stale comments and README
- `.gitignore` said `index.html` unanchored, which also caught the Vite source page; a fresh clone could neither `dev` nor `build`. Anchored to `/index.html`, page added. - Removed GM_REMOTE (tools/remote/gm-browser.ps1 and the ssh/scp branch in browser.mjs): the Windows test machine is gone and the only flaky check that lived on it is closed (#37). - Removed `npm run preview`, undocumented and unused. - Comments: wrong number in collider.test.ts (250 → 200), the "declarations used to…" history in listItems.ts and friends, the 24 px/28 contradiction, section banners in nodes/index.ts, node-catalog.test.ts and api/index.php, name paraphrases, and the stale step numbers in tools/e2e/11-…23- from the old global count. - README: asset types include `animation`, kind order Number/Text/Boolean, tagged colour and texture items, 6/5 kinds, the `Texture` node, `./build.sh`, PROJECT_FORMAT_VERSION, and the file tree (kinds.ts, listItems.ts, propertyPorts.ts, Breadcrumb.ts, beads.ts, tools/assets/). - tests/helpers.ts takes the duplicated `findObject` and `sceneWithCamera`. Proof: ./check.sh 797 tests, full e2e ALL PASSED 633 checks against this bundle. Co-Authored-By: Claude Fable 5.1 <noreply@anthropic.com> |
||
|
rootandClaude Fable 5.1
|
8a7185948d |
Make texture and colour full kinds and drop the load-time migrations
- `Texture` and `Color` can be picked as a variable kind, a struct field kind and a declared port kind; a new `Texture` node hands a picture id into the graph. Declared, a texture is its bare id – the `$texture` tag stays a list-only thing. - The `String` node is labelled "Text" like its kind; the type id stays. - Whole-number inputs (`Item at`, `Set item`, `Sub list`, `Fill`, `Repeat`, `Substring`, `To text`) show no decimals (`int()` in shared.ts). - All server projects are reseeded, so `legacyNodes.ts`, `migrateDeclaredLists` and the `ownerId` fallback go, with their tests. - Note `reseed-because-of-list` moved to done/; new note `refactor-types`. Co-Authored-By: Claude Fable 5.1 <noreply@anthropic.com> |
||
|
rootandClaude Opus 5
|
1135bf4562 |
Play sprite animations from an animation asset worn through texture
An animation asset is a list of pictures (whole textures or frames) with frames per second and Loop/Once/Ping-pong playback. A sprite wears it through its texture property, so the picker, instance overrides and the Properties node work unchanged; there is no dedicated play node. A different animation starts from its first frame, the same one set again runs on, so a graph may choose Run or Idle every frame. The clock lives on the entity, not in props, which the world writes back as overrides. The AnimationSystem ticks before behaviors, and On animation finished fires once when a Once animation reaches its end. The Animation tab plays a preview above a frame strip: reorder by dragging, Delete, duplicate, + Frames, pause/resume, and wheel zoom about the pointer with pan and Fit. Scene and Container tabs show the first frame; edit mode has no clock. Right-clicking a texture creates an animation from its frames. Button now measures its label with the bold font it draws in, which cut the Animation tab and red dialog buttons short. Co-Authored-By: Claude Opus 5 <noreply@anthropic.com> |
||
|
rootandClaude Opus 5
|
495756b500 |
Remove exports and methods nothing uses any more
A reference search over every export and method in src/ found code that only tests still called, or that was never called at all: - RemoveSceneObjectCommand: the product only removes through the multi-object command; the tests now use that one too. - NodeRegistry.requireNodeDef: a second function of the same name in commands/require.ts raises a CommandError instead of throwing, and is the one the product uses. The twin invited the wrong import. - isTextureAsset, listContainers, AssetTabEditor.show, FocusManager.destroy, KeyboardBridge.selectAll and the getters ColorField.value, ListView.selected, NumberField.number. Also: Theme.controlActive now matches the resting control colour, and a new note asks what editing the graph during play would take. Co-Authored-By: Claude Opus 5 <noreply@anthropic.com> |
||
|
rootandClaude Opus 5
|
58f19a3451 |
Replace the property nodes with one Properties node
Get/Set property, Get/Set properties, Set enabled and Set text are gone. A single Properties node takes a fixed "object" input; every chosen property is an output that reads the current value, and one switched to Set is also an input written when the flow arrives. Exec pins only exist while at least one entry writes. The node carries a type (Sprite, Text, Collider, Camera, Container, Behavior, Any) that decides what "+ Property" offers: the fields of that type, the variables of the chosen behavior, or for Any a kind to pick and a name to type. Each port takes the default and field of its type, so a Camera width starts at 640. Switching the type keeps the ports and marks those the new type lacks. At runtime the type is only an editor aid; the node writes to whatever object it gets. Old project files are converted on load. The type is inferred from the keys: the first object type that has them all, else the one behavior that declares them all, else Any. enabled belongs to every object, so a converted Set enabled lands on Any. The jump-run and tetris seeders use Properties throughout; draw-piece switches its cell on in the same node that sets the colour. Co-Authored-By: Claude Opus 5 <noreply@anthropic.com> |