8a4e4a676263b5e6004018bfe581977c9c3c7cc4
165
Commits
| Author | SHA1 | Message | Date | |
|---|---|---|---|---|
  adminandClaude Opus 5.5
|
8a4e4a6762 |
Play sounds as notes of an instrument asset #331
A sound could only be played as it was, one at a time. An instrument
is a node graph that makes a note a sound: Notes nodes bring the note
in, Samples play sound assets for it, the effects of a sound FX shape
it and the Output sums the layers. Its tab plays it from a keyboard,
a behavior with Play note. It is what patterns and songs (#330) will
play.
- New asset type instrument, under the heading Music, not placeable.
A new one starts as Notes into a Sample into the Output.
- Notes are counted as MIDI does: 60 is C4, names like C#4, sharps
only, the lowest C-1. Notes has From and To, outputs any, note,
frequency and velocity, and with Single notes a trigger per note,
each with an optional name for a drum kit.
- New port type trigger, only into the trigger of a source. Inputs
can take any number of edges now (PortDef.many): a trigger, and
the Output, which plays everything into it side by side.
- Sample plays a sound asset. Follow note shifts it by note - root
through the pitch worklet of #317, so it keeps its length. Gate
fades it out at the end of the note, One-shot plays through. Loop
runs between Loop start and Loop end, also in the worklet.
- Parameters declares the instrument's own parameters with a
default. Sound FX sends the sound through a sound FX asset, its
parameters as inputs, the sound set in where its Input was.
- compileInstrument walks the graph once per note. A trigger is on
only for the notes it stands for, a silent source silences what it
alone feeds, a Mix with a silent side is the other side. velocity
and the parameters stay open for the voice. Builds are cached per
note until the graph or a sound or FX it names changes.
- The player takes a note as one voice of several layers, each way
with its own file and volume. release fades the gated ways out,
one-shots play on. playNote can release after a duration.
- Play note plays one note with velocity, volume, duration and
detached, and hands out voice for Set sound FX parameters and
Stop sound. Velocity is always loudness. Instrument parameters
picks values for the instrument's parameters like Sound FX
parameters does for an FX, renames follow.
- The tab has the graph, a header field per parameter, Stop, and
128 keys below. Keys without sound are grey. A key plays while it
is held. Focused, the computer keyboard plays as in a tracker by
KeyboardEvent.code, the arrows move the octave.
Findings:
- A label of the keys set fill on the shared small text style and
darkened every small label of the editor. Caught in a screenshot
before the commit, the keys have a style of their own now.
- Suite task 523 on
|
||
|
adminandClaude Opus 5.5
|
e7a360db73 |
Offer the easings of an animation key on Lerp and sound FX ramps
A timed Set sound FX parameters ran only linearly, and a Lerp had four quadratic eases of its own. An animation key already had the full set. Now all three offer the same choice: Linear, Step, the ten curves from Sine to Bounce with In, Out or In-out, and a drawn Curve asset. - easingParams in src/core/graph/nodes/easing.ts gives a node the fields Easing, Direction and Curve from the key's own lists, and easingOfParams reads them back as a key interpolation. - There is no migration. A Lerp saved with the old in, out or inOut runs linear until its easing is picked again. - Set sound FX parameters hands the easing to the player. Linear and Step stay ramps of the audio clock, every other easing goes to setValueCurveAtTime as 200 samples a second, in semitones and dB. - Step now reaches its end at t 1. A key never asked for that, it reads the next key itself, so animations play as before. - The curve-in-use count and the warning for a gone curve cover the sound node too. Tests: - node-catalog: Lerp with cubic in, quad out and in-out, a curve without a direction, step, an unknown easing as linear. The sound node hands on a curve, step and a gone curve as linear. - sound-library: an eased change becomes a curve in semitones and decibels, a step a jump at the end. - node-catalog and curve after dropping the old values: 399, green. - e2e 6, 34, 53 on melektaus-atx: ALL PASSED, 198 checks. In Chrome a 2 s Quad in from depth 7 to -5 read speed 0.864 early and 0.5 at the end, a 1 s Step held 1 and then jumped to 0.5. - Counter-check: with curves sent as linear ramps, the curve test of the sound library fails. Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> |
||
|
adminandClaude Opus 5.5
|
ed2b58b3c0 |
Load the sounds of a project ahead of their first play
A sound was fetched and decoded on its first Play sound. That play started late, its beginning was not heard, and a graph that tuned the voice in the meantime had moved on by the time it started. Images and fonts were already loaded when a project opens. Sounds now are too. - projectFiles lists the sounds of a project, and preloadProjectFiles hands them to the new soundLibrary.preload. That covers the editor and the published game. - Preloading opens no audio device. It decodes with an OfflineAudioContext at 48 kHz. The real AudioContext is still made on the first play, and a source resamples where the device runs at another rate. - A run started right after opening a project can still find a sound loading. It then starts late as before. Tests: - sound-library: a preload makes only the offline context, and a play after it starts at once, opening the device only then. - sound-library + project-files: 18 tests, green. - e2e 34 on melektaus-atx: ALL PASSED, 30 checks. - Counter-check: decoding with the real AudioContext again fails the new test. Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> |
||
|
adminandClaude Opus 5.5
|
183f356c99 |
Let a game hand values to the parameters of a sound FX #311
A sound FX played the same every time: its numbers were settings of the nodes. Now the Input declares parameters with a default, every number of Gain, Pitch and EQ is an input they can feed, and a Play sound hands in values for them. - Input declares number parameters in the inspector, each with a Default (DeclaredPort.default, SetPortDefaultCommand). They are outputs of the Input. Input and Output count as terminals now, one of each per graph. - Gain, Pitch and EQ take their numbers at inputs under the keys the settings had, so saved graphs sound as before without a migration. Each value is held to its range however it arrives. - The compiler gives an FxPlan with the parameters still open. fxChainOf fills them in when a voice starts. The player still only sees an FxChain. - New behavior node Sound FX parameters: names an FX and picks its parameters like a Variables node picks variables. Each picked one is a number input that starts at the FX's default. Its output has the new port type fxparams, which only fits Play sound's fx params. - Play sound warns when the parameters name another FX than the one it plays. Names the FX does not know are left out. - Renaming a parameter at the Input renames it in every Sound FX parameters node naming that FX, edges and values included. - The Sound FX tab has a number field per parameter in its header. Play uses those values, they are never written into the asset. - A value counts from the start of a voice. Changing a playing voice is #315, a Mix node is #316. Tests: - soundfx.test.ts 22 (+11): parameters in the plan, held values, a 0-by-default stage, EQ band, save with defaults, wrong port types, default command with undo, Sound FX parameters into Play sound, defaults of picked ones, node problems, mismatch, rename with undo - node-catalog 368 (+3): Play sound fx params, Sound FX parameters - e2e 34: ALL PASSED - 28 checks (+2: header field plays depth 5, a Sound FX parameters node gives the game's voice depth 7) - Gate on melektaus-atx: typecheck, lint, prettier clean, 240 test files, 3636 tests green - Counter-check: with fxChainOf ignoring the values and the rename not followed, 5 of the new tests fail. - Browser probe: header fields, inspector Default and the picked parameter looked at in two screenshots. Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> |
||
|
adminandClaude Opus 5.5
|
de14f0f9e2 |
Play a sound through a graph of gain, pitch and EQ effects #311
A sound could only be played as it was uploaded. A Sound FX asset is
a node graph like a shader: Input, effects, Output. Play sound has a
new input fx that sends the voice through it.
- New asset type soundfx ("Sound FX"), not placeable, with a graph
and its own tab. The heading in the asset panel is "Sound effects",
so it does not take the click meant for the + menu entry.
- Nodes in core/soundfx/nodes.ts, category sound, port type audio
that only fits audio: Input, Output, Gain (dB), Pitch (semitones),
EQ (80 Hz and 12 kHz shelves, peaks at 250 Hz, 1 kHz and 4 kHz).
- compileSoundFx walks back from the Output with the shared graph
emitter. An input takes one edge, so the result is one line: a
pitch and a list of gain and filter stages. A node without input
or a graph without Output reports a problem on the node.
- Pitch is the playback rate of the source. It applies to the whole
sound and also changes its length, the node description says so.
- The BehaviorSystem resolves fx and hands the line to the AudioSink.
An fx that is missing or does not compile plays the sound dry.
- SoundLibrary wires source, stages, volume, destination in that
order. stats().last now also names pitch and stage count.
- The tab header picks one of the project's sounds and plays it
through the graph as it stands. Stop there ends only its own voice.
Tests:
- soundfx.test.ts (new, 11), sound-library (9, +2 for the wiring),
node-catalog (+1 for fx), graph and asset-groups adjusted
- e2e 34: ALL PASSED - 26 checks (+5: + menu opens the tab, palette,
2 effects, tab Play and game Play through the FX at -12 st)
- Gate on melektaus-atx: typecheck, lint, prettier clean, 239 of 240
test files green. The red one was sound-library (its fake
AudioContext had no playbackRate), fixed afterwards, gate not
re-run in full.
- Counter-check: without the audio rule in portsCompatible the port
test fails.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
|
||
|
adminandClaude Opus 5.5
|
7b1796baac |
Let a container animation reach alike-named objects in another one
An animation over a container aims its rows at template ids. Played on another container, those ids are not there, so every row below the root was skipped without a word. "Enemy - Hit" built over the Slime flashed the slime's Sprite but never the skeleton's. - When the template id is not found below the object, the runtime takes the names on the way to the row's target in the root and walks the same names below the object, level by level. - The id still comes first, so the root's own instances bind as before. - A name missing at some level, or taken twice, skips the row, as a gone target always did. - The rule is the pure function targetNamePath in animation.ts. The AnimationSystem only walks the children. Tests: - animation.test.ts: 84 tests, all green (+2). One plays over a second container built alike, renamed and with the name twice. The other names a row two containers deep. - Counter-check: with the name fallback off, the new runtime test fails (1 of 84). - Project cbbf160bb7e8 (revision 14407), Demo scene: "Enemy - Hit" and "Enemy - Die" change Flash and scale on the skeleton's Sprite. Without the fallback the skeleton stays unchanged. - The gate did not run before this commit. CI covers it. Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> |
||
|
adminandClaude Opus 5.5
|
3e05cbbed5 |
Let pixel art and vector art be nine-sliced and sorted (#308)
Nine-slice and the sort line hung on the texture frame alone. Drawing and sorting already read both off the TextureRef every picture hands out, but the generated pictures always said "no slice, no line". So the feature moves from the frame to the picture, without a second copy of any rule. - PictureCut (border, fill, sortLine) is one type. TextureFrame extends it, PixelArtAsset and VectorArtAsset carry it as a whole. The texture file format does not change, and no migration is needed. - The rules in texture.ts take a cut and a size: cutSortLine, setCutSlice, rawCutSlice and the rest replace the frame* versions. serialize.ts reads all three through one readCut. - cutTarget.ts resolves a target to cut and size: a texture frame, a pixel frame's size or the vector canvas. It lives apart from texture.ts because vectorart.ts reaches texture.ts itself. - SetSliceCommand and SetSortLineCommand take that target instead of (assetId, frameId). They refuse an asset that draws no picture. - generatedRef fills slice and sortLine from the drawing. The whole strip of a pixel art asset with several frames gets none, it is no picture of that size. With one frame asset and frame are the same. - Nine-slice scale is one shared schema row, now also on pixel art and vector art. - cutSection.ts holds the NINE-SLICE and SORTING rows once. The frame inspector and the drawing inspector both build them. - SheetCanvas draws a drawing's lines that are set, dashed as in the Texture tab. They are not dragged there, the painting tools own the canvas (as proposed in the issue). - drawOrder falls back to the picture's height when a ref has no rect, or a sort line on vector art would have been ignored. Tests: - Gate: 232 files, 3542 tests (+8: drawing-cut.test.ts, and vector art in sort-by-y.test.ts). Three counter-proofs bite: no cut on a drawing, a cut on the whole strip, no height fallback. - e2e 48: 44 checks (+1, sum 1732). 48l-ii reads red and blue where 12-pixel borders at scale 2 put them. Without borders both spots read green. - Looked at: the Pixel art tab with the lines, and the sliced sprite. Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> |
||
|
adminandClaude Opus 5.5
|
d9c6bbfa4d |
Add a node that names the render layer of an object (#305)
The issue asked for Set render layer, Set sees and Render layer of. As with #211, a probe showed that writing already works. A Properties node of the object's type writes Render layer during a run, Inherit included, and one of type Camera writes Sees. The next picture follows both. As agreed, only Render layer of is built, and writing stays with Properties. - Render layer of is a data node with the input object and the outputs name and number. It answers the layer that holds, so an object without a choice of its own names its parent's. - NodeContext.renderLayerOf answers the number with the same rule the drawing uses (renderLayerAlong). The new field renderLayers on GraphLookup brings the names to the node. - hasRenderLayer in PropertySchema says which types are drawn. - Decided here: for an object that is not drawn (a camera, a behavior, a collider) the name is empty and the number -1, as Layer of does without a collider. Changing the render layer or Sees during a run had no test so far. Three unit tests now hold the proof from the issue. Tests: - Gate: 231 files, 3534 tests (3526 + 8), exit 0 - e2e 6: 149 checks passed, e2e 63: 13 checks passed (+1) - Unit: the coin moves into the overlay with Set and back with Inherit, a HUD container takes its sprite along, the main camera sees a second layer once its Sees is set, and Render layer of names the inherited layer, and none for a behavior - Node catalog: four cases for Render layer of - 63c3 moves a sprite onto UI in a Play run: the main camera no longer draws it, and the log reads "UI" and "1" - Three counter-probes fail 1, 1 and 2 tests: without inheriting in the node, without the check for a drawn type, and without inheriting in the drawing - "layer of" in the palette still finds Layer of first (6z-x) - The e2e sum is 1731 (1730 plus 1) Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> |
||
|
adminandClaude Opus 5.5
|
1d0fa7b947 |
Let the game view zoom up to 20x
A small camera on a large screen stopped at 6x. The steps now go on in whole numbers up to 20, both in the zoom menu of the Game tab and for Auto, which takes the largest step that fits whole. - GAME_SCALE_STEPS in playSettings.ts runs 0.25, 0.5, 1 to 20. Prettier wraps the longer line. - e2e 60 keeps its own copy of the steps to work out what Auto should pick. The copy follows the new list. Tests: - view.test.ts: 23 passed (every step is used as its own factor) - e2e 60: ALL PASSED - 19 checks (Auto still picks 4 at 1280x800) Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> |
||
|
adminandClaude Opus 5.5
|
808e1eefc2 |
Clean up duplicates and dead code, and fix the + menu check (#85)
Refactoring round 9 covers everything since round 8 ( |
||
|
adminandClaude Opus 5.5
|
a526e1b40f |
Use a shader graph as a node in other shaders (#303)
A calculation needed in several shaders (a greyscale, a noise, an outline) had to be built again in every one of them. A shader function keeps it as an asset of its own, called like a behavior is since #16. - New asset type `shaderfunction` ("Shader function"), edited in the Shader tab. The panel beside the graph shows no picture, the readout counts its inputs and outputs. - Two new nodes: `Function input` and `Function output`. Their declared ports, numbers or colours only, are the ports of every call. One of each per function, like Start and End. - The call is node `ShaderCall`, named after the function. The palette lists every function, it can be dragged in from the Assets panel, and a double-click opens it. - The compiler sets the function in where it is called (`inlineFunctions`). It renames the copied nodes `<call>/<node>` and turns an unconnected port into a constant. Passes, Time, the Edge cut and the corner walk then see a plain graph. - A problem inside a function is reported at the call, in the function's words. The function's own tab checks it on its own (`checkShaderFunction`). - `ShaderLibrary` keys a shader on its graph and on every function it calls, however deep, so a change reaches every caller. - The port commands mirror a new, renamed or removed port into every call, as for a behavior's Start and End. `NodeDef.portKinds` holds the two ends to Number and Color. - As agreed in the issue: no `Property`, `Color property`, Output or Vertex output in a function, and `Time` is the caller's clock. - Own decision: a `Pass` may stand in a function. It becomes a pass of the calling shader, so a wide blur can be a function. - A function calling itself, also through another, says so at the node and is not set in. The palette does not offer such a call. - The Shader tab showed only the compiler's problems. A call nothing reaches was never compiled and looked healthy, so a call now also shows its own problem there, as in a behavior. Tests: - Gate: 228 files, 3510 tests, CHECK EXIT 0 (+13: 11 in tests/core/shader-functions.test.ts, 2 for the new icon) - e2e 28: 100 checks, all passed (+3 in 28l-viii). Called and in place both #606060/#a2a2a2, halved in the function #303030/#515151. - Counter-check: a fingerprint without the called functions fails 1 unit test, and in the browser the change check (#606060 stays). - The first e2e runs found two faults, both fixed: a double-click only selected the function, and an unreached call of itself showed no problem. - e2e total 1728 is computed (1725 + 3). Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> |
||
|
adminandClaude Opus 5.5
|
2e55071fa5 |
Lay a shader over a camera's whole picture (#299)
A shader so far worked only on its own wearer. Effects over the whole game picture, such as a vignette, grey, scanlines or a red flash on a hit, had no place to live. A camera now wears one, drawn the way a field shader of a particle source is (#170). - The camera gets a Shader row and, while one is picked, a Shader resolution row. The shader's properties follow as camera rows. They load, animate and appear in a Properties node under Type Camera. - Every view keeps masks and objects in one container. CameraShade renders it into the camera's picture, cleared to the background, and draws the shader over the frame. Game tab and play.html take the container off the stage while the picture stands in for it. - Screen pixels gives the picture as many pixels as it covers on screen. Camera pixels uses View width x View height and scales up without smoothing. - A pixel counts as a camera pixel in both (the user's choice). The uniform uPixelScale makes Texture size read View width x View height, so a Blur keeps its reach at any game scale. - Each camera wears its own shader, overlay cameras included. A red flash on the game camera leaves the HUD of an overlay camera alone. - The scene view's eye has a Shader switch on the Camera row, off by default. With it on, the main camera's shader lies over its frame, below symbols and gizmos, and the world around it stays drawn. - New tool tools/perf-camera-shader.mjs measures the cost. Measured on stein2 (HD 630, Game tab at Fit 1310x679): a camera shader that hands the picture through stays inside the scene's own spread of 3 to 5 fps between runs. A Blur of 4 cost 4 to 8 fps. Tests: - Gate on melektaus-atx: 227 files, 3497 tests (3487 + 10). - e2e 63 alone: 11 checks (6 + 5), e2e sum 1725 counted. - 63e-63i: pass-through is byte-equal and upright at 100%, flat red reaches the corners while the overlay keeps its green, Texture size reads 640 x 360 in both resolutions at Fit, no shader draws as before, and the scene view shows it only with the switch on. - Counter-checks: a camera left out of the shader wearers fails 1 unit test. Counting screen pixels fails 63g with #ab6000. Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> |
||
|
adminandClaude Opus 5.5
|
b2326085ed |
Show each camera only its layers and lay overlay cameras on top (#302)
A camera could only show the whole scene, so a HUD drawn in the world would run through a camera shader (#299) with everything else. Render layers say which cameras see an object, and overlay cameras draw their own picture over the main one. - The project has a list of up to 16 render layers, edited in Project settings next to the collision layers. It is a list of its own, read by the same rules (`layerNamesOf`). - Sprites, texts, tilemaps, particle sources and containers carry a row `Render layer` under their switches. Its default `Inherit` takes the parent's layer, at the top the first one. - A camera has `Sees` (all layers by default) and `Overlay`. The main camera is the first one switched on without Overlay, so two plain cameras still draw through the first one only. - Every view through a camera keeps only what that camera sees and lays one see-through view per overlay camera over itself. That view is a `WorldViewport` of its own, handed its view and frame from below. - An overlay is fitted into the main camera's whole picture without distortion. One of the same size and zoom covers it exactly. - `z` sorts within one camera only. The pictures lie on top of each other as a whole, which is what a shader per camera (#299) needs. - The Game tab's preview now collects the scene once per redraw. Before it collected it twice, with the cameras it would have been five times. - `SetCollisionLayersCommand` became `SetLayerNamesCommand`, which takes the list it sets. Follow-ups: #304 (the mouse through a chosen camera) and #305 (change the render layer at run time). Tests: - Gate: 226 files, 3487 tests (3480 + 7) - e2e 63 (new): 4 checks. A green overlay sprite at z -10 covers a red main sprite at z 1000, in the preview and in the running game. A `UI` sprite in front of the main camera and a `Default` one in front of the overlay stay away. Without Overlay the second camera draws nothing. The settings dialog adds a render layer at the end. - Counter-checks: inheriting from parents switched off fails 1 unit test. Overlays never drawn fails the two overlay checks in e2e 63. - e2e total 1720 (1716 + 4), computed. Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> |
||
|
adminandClaude Opus 5.5
|
f1e3bd8378 |
Let a joint glide on a rail and drive it with a motor (#154)
Step 2 of the joints: a door that opens by itself, a lift and a piston need a joint that slides along one line and a motor that turns or pushes. A graph also needs to read how far such a joint stands. - Slider: a fifth joint type on Rapier's prismatic joint. Its rail is the joint's own x axis, so turning the joint turns the rail. Joints now carry Scale, Rotation and Mirror like a sprite. - Limit distance with Min and Max, in world units from where the object was placed. - Motor on hinge and slider: Off, Speed or Target, with Motor speed, Motor target and Max force (0 = no limit). Target goes there at no more than the speed and slows down for the last stretch. - Changing speed, target or force keeps the engine joint. Switching the motor on or off builds it again. - New node Joint position: value and speed of a hinge (degrees, counting past a full round) or a slider (world units). - Scene view draws a slider's rail dashed, with a tick at each limit. - shownFor in the schema takes a list of choices that must all hold. Findings, measured with a probe against Rapier 0.20: - A prismatic joint holds both bodies at one angle. Held to the scene or to an object without a rigidbody, the joint's own anchor body is turned by the placed difference, so nothing jumps. Between two rigidbodies the held one is turned to match, and the console says so once. - Rapier reads no joint angle back. The position is worked out from the two bodies. - A hinge motor is weak on a small body at the end of a long arm (box 20 on an arm of 100 does not lift itself). More solver iterations would help but cost every scene. A door of 100 x 20 reaches -90 and holds it. This is written in the wiki. Tests: - Unit: 16 new in joints.test.ts, 1 in joint-links, 3 catalog cases. - e2e 41: 27 checks (25 + 2), block 41f with a real mouse in the inspector and the motor in play (59.1 of 60 units in 1 s). - 9 of 9 unit counter-probes fail as they should. - Gate: 220 files, 3436 tests (3416 + 20), CHECK EXIT 0. - e2e total 1701 is counted (1699 + 2), the full suite did not run. Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> |
||
|
adminandClaude Opus 5.5
|
4407c02078 |
Keep who played an animation beside its player, not on it
|
||
|
adminandClaude Opus 5.5
|
d6fd000160 |
Let a behavior hear the end of an animation it played itself
A behavior that played an animation on the parent of its owner never heard it finish. On animation finished listened to the owner and to what stands below it, and the parent stands above. - Play animation notes on the player which behavior asked for it. - On animation finished hears, as before, every animation on the owner or below it, and now also every animation the behavior played itself, on whatever object. Its output object names that object. - Two behaviors that both played the same animation on the same object each hear its end once. - A behavior that is called by Run behavior or heard by an On node counts as the behavior it sits in. - The description of the node and the engine prompt say so. Tests: - Gate on melektaus-atx: 218 files, 3392 tests, CHECK EXIT 0. - Two new unit tests: the behavior hears the animation on the parent of its owner while a bystander does not, and two starters hear it once each. - Both counter-probes bite. - e2e 6,17-26 on melektaus-atx: 480 checks, all pass. - No new e2e check, and nothing was looked at in the browser. The rule for called and heard behaviors has no test of its own. Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> |
||
|
adminandClaude Opus 5.5
|
7dd3ae1131 |
Tie two objects with a hinge, a spring, a rope or for good (#154)
Two bodies could not be connected: no door on a hinge, no lamp on
a rope, no wheel on an axle. This is the first step of the issue,
the four joints without a motor. The slider and the motors follow
in a second step under the same issue.
- Joint is a new asset type, placed as a child of the object it
holds, like a collider or a rigidbody. "Add joint…" in the
object menu makes one or places one the project has. An object
takes as many as it needs.
- Where the joint sits is the point it holds its object at. A
hinge and a fixed joint have that one point only. A spring and a
rope end at a connected anchor on the other object, counted in
that object's own units, or in the scene's without one.
- The rows follow the type: length, stiffness and damping for a
spring, length for a rope, an angle limit for a hinge. Length 0
takes the distance the two ends were placed at. The limit counts
from how the two were placed.
- The connected object is an object reference in the schema of the
type. Pasting, containers and removing treat it as they treat
every reference since #258.
- shownFor is a new schema option: a row is shown while an enum of
the same bag holds one of the named values.
- The object needs a rigidbody, its own or one further up. Without
one the joint holds nothing and the console says so once.
- A connected object without a rigidbody is a moving anchor: the
joint has a kinematic body of its own that follows it.
- A connected object destroyed while playing makes the joint let go
with a hint. Removed in the editor the reference empties, so the
joint holds on to the scene. The issue asked for "inactive" there.
- "Add joint" ties two objects while the game runs, from a joint
asset as the template. Destroy on the joint lets go, there is no
Break joint node. Destroy with keep children takes the joints
along with the object.
- The scene view draws a line from each joint to what it holds on
to and rings the held point. A selected spring or rope has a
round handle on its far end, and dragging it is one undo step.
- Joints hold in Play only. The editor run simulates nothing
(#148), and the inspector of a placed joint says so.
- Rapier counts a revolute joint's limits absolutely, not from the
start, so the placed angle is added. Measured with a probe.
- The + menu has 25 types now and no longer fits under its button
on a canvas 800 high. It scrolls there, and e2e 04 scrolls to
the last entry instead of expecting it in view.
Tests:
- Gate on melektaus-atx for this state: 218 files, 3390 tests
(3336 + 54), exit 0.
- e2e 1-16,24,39-46,51,52,57,58 on melektaus-atx: 831 checks, all
pass. Module 41 alone: 25 checks (21 + 4).
- 54 new unit tests: 40 in joints.test.ts (rope, spring, pendulum,
limit, fixed, the other end, the node, containers, paste), 6 for
the line the scene view draws, 4 catalog cases of the node. The
remaining 4 come from tests that make a case per asset type.
- Four new e2e checks in module 41: Add joint from the menu, the
rope to the hook with its line and handle, dragging the handle
with one undo, the bob hanging in Play next to one that falls.
- e2e 04, 40 and 46 count the new type in their lists.
- 21 of 22 unit counter-probes fail their tests. The other one is
equivalent: Rapier ignores removing a joint that left with its
body, the guard stays.
- Three browser counter-probes fail their checks (2, 1 and 2).
- One screenshot looked at: icon, line, handle and the rope rows.
- The e2e sum of 1691 is counted (1687 + 4, 1687 measured by CI
on
|
||
|
adminandClaude Opus 5.5
|
c88f57cf0a |
Let a project choose how its game link is zoomed (#279)
The page of a released game always drew the camera at Auto, the
largest whole step that fits. A camera of 300x180 in a window of
1280x800 stands at step 4 and leaves a border left and right. The
issue asks for Fit next to it. Answered there: a setting of its own
rather than the scale of the Game tab, and no switch for the player.
- The project has a field gameLinkZoom, 'auto' or 'fit'. A document
without it reads as 'auto', so nothing changes for a project that
is there already. No format bump.
- Project settings has a row "Link zoom" with a menu of Auto and
Fit. It is an undo step of its own, SetGameLinkZoomCommand.
- GameScreen hands the field to cameraView where it passed a fixed
'auto'.
- gameScale, the scale of the Game tab, is not touched and does not
reach the link.
- The released copy is frozen, so the change reaches the link only
with "Update release".
Decided here:
- The row is called "Link zoom", not "Game link zoom" as proposed.
The longer label is wider than the label column of the dialog and
pushed its button 12 px out of line with the others.
- The undo step keeps the name "Game link zoom", which is what the
tooltip of the undo button shows.
- A note under the row says "The released game at the largest whole
step that fits, or filling the window."
Tests:
- Gate on melektaus-atx: 211 files, 3227 tests (3219 + 8), exit 0
- e2e 60 on melektaus-atx: 19 checks, all pass
- e2e 35,46,59,60: 74 checks, all pass
- No full run and no smokes. The sum of 1671 (1668 + 3) is reckoned,
1668 is what CI counted for
|
||
|
adminandClaude Opus 5.5
|
345289982b |
Scale, turn and mirror the shapes of a vector drawing (#291)
A shape could only be moved and reshaped point by point. Whoever
wanted it larger or turned pulled every point alone, and for several
shapes or a group there was no way at all. The answers in the issue
settle the rest: the change is baked into the points, nothing of it
is remembered, and the line width stays.
- With Select the selection stands in a frame of eight squares and a
knob, drawn like the one of the scene view. It holds one shape,
several shapes or a group, the same selection that is dragged as
one.
- A corner square scales from the opposite corner, a square on an
edge in its own direction. Shift keeps the proportions, Alt scales
about the middle.
- The knob turns round the middle of the frame, with Shift in steps
of 15 degrees. After the pull the frame stands upright again.
- The inspector has a band TRANSFORM with X, Y, Width, Height and
Rotate by, and the buttons Flip horizontal and Flip vertical.
- Points, handles, gradients and texture tiles are taken through the
same matrix. The rule is a pure function in vectorTransform.ts,
transformShapesCommand makes one undo step of any number of
shapes.
- A press goes to a point or a handle first, then to the frame, then
to a line. shapeFrame.ts holds where the handles are and what a
pull of each means.
Decided here:
- The frame stands 15 pixels off the shapes. The points of a shape
lie on its bounds, so a square on the bounds would cover them.
- The knob only turns. In the scene view it scales as well.
- A side cannot be pulled through the opposite one, the frame keeps
at least 1 pixel.
- Coordinates are rounded to a thousandth of a pixel, so a quarter
turn is exact.
- A texture tile stays upright under a turn and grows to the bounds
of the turned tile. The bands of a gradient stay square to its
axis under an uneven scale.
- The switch Scale stroke of the proposal is not built.
Found on the way:
- The inspector of a shape is now taller than the window. Two checks
of module 47 no longer found their row or button on the screen and
use the new hook inspectorButton, which scrolls there first.
- Not solved: with a shape at the top edge of the view the knob lies
outside the tab. The wiki names it under the limits.
Taken over from #217: the e2e check for two selected shapes without
a group, and unit tests for the snap of the common offset and for
the gradients of the shapes dragged along.
Tests:
- Gate on melektaus-atx: 209 files, 3176 tests (3121 + 55), exit 0
- e2e 47,48 on melektaus-atx: 112 checks, all pass
- No full run and no smokes. The sum of 1664 (1660 + 4) is reckoned,
1660 is what CI counted for
|
||
|
adminandClaude Opus 5.5
|
275e50af01 |
Let a tile report a touch instead of blocking it (#160)
A tile could be solid, one-way and scaled, but not report without blocking. Water, lava, spikes or a goal zone needed a trigger object of their own laid over the map. Now a tile has a switch Trigger, and the collision events name the tile and the cell they met. - A tile has the switch "Trigger (reports, never blocks)" under Solid. Its cells hold nothing up: no Move, no falling body, no ray. They raise On collision enter, stay and exit with the tilemap as other. - The three events have the outputs tile, cell x and cell y. Without a tile, tile is empty and the cell is -1, -1. - The three events have the input per cell. Off, the default, gives one event per area: cells of the same tile that touch side by side. On gives one event per cell. - The scene view outlines trigger cells in yellow like a trigger collider, merged to rectangles but never with solid cells. - Is touching with the map counts trigger tiles, and Set tile works while the game runs. - Both systems find the touches with the same overlap check in runtime/systems/tileTriggers.ts, not through the physics engine. Decided here: - Trigger wins over Solid. A tile with both does not block, as with a collider. - Water beside lava is two areas, and so are two ponds that touch only at a corner. - An area names the cell nearest to the centre of the collider, and on exit the cell it named last. - The solid cells of a map still do not name their tile. - Normal, impulse and point are 0, as with a trigger collider. - Collision scale and outlines shape a trigger cell like a solid one. One-way, friction and bounciness have no effect. Tests: - Gate on stein2: 205 files, 3104 tests (3067 + 37), exit 0 - e2e 39,40: 106 checks. e2e 1-8,39-43: 490 checks. Both on melektaus-atx. No full run, the sum of 1648 (1645 + 3) is reckoned and CI measures it. - 37 unit tests in tests/core/tile-triggers.test.ts, nearly all against both systems - Three e2e checks with a real mouse in block 40l-iv - 24 unit counter-probes fail tests. Two did not at first, tests were added for them. - Two browser counter-probes fail their checks - Two screenshots looked at (yellow outline, the node with per cell) Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> |
||
|
adminandClaude Opus 5.5
|
2ff3a78607 |
Put the shapes of a vector drawing on layers and in groups (#190)
A vector drawing was one flat list of shapes. With many shapes the list got hard to read, and several shapes could not be kept or moved together. Now the shapes stand on layers, as in pixel art, and can be put into groups that nest. - A drawing has layers, each with a name and an eye. A hidden layer is neither in the tab nor in the picture a sprite wears, and its shapes cannot be pressed. One layer is the one worked on: the pen and Add shape draw onto it, and SHAPES lists what is on it. - The inspector has a list LAYERS over the shapes. Its plus adds a layer, the cross on a row removes it with all on it, the last one stays. A double-click renames, a drag sorts. - Group (Ctrl+G) puts the selected shapes into a group, Ungroup (Ctrl+Shift+G) takes it away. A group stands over its rows in the list, the rows one step in, and a row is dragged into a group or out of it. - In the tab a press on a shape takes its outermost group, and a drag moves the group as one undo step. - The model has layers with a tree of shapes and groups instead of a flat shapes array. The rules are pure functions in core/model/vectorTree.ts. A drawing saved before opens with all its shapes on one layer. - SortableList takes rows with a depth and drops into a tree. The flat lists of tilemap and pixel art run as before. Decided here: - A group has no transformation of its own and cannot be hidden or locked. Rotating and scaling is the follow-up #291. - A group is never empty: the one that loses its last shape goes with it. - Several selected shapes are dragged together, grouped or not, and a click on a shape of the selection keeps the selection. This is what #217 asked for. - Shift+click selects like Ctrl+click. With Select, Shift pans only beside the shapes, as in the scene view. The middle button pans anywhere, and with the pen and Paint Shift pans as before. - A row of the list picks one shape of a group alone. - Shapes change their layer through a row Layer in the inspector, which is there from two layers on. Rows are not dragged between layers. - A group cannot span two layers, the button is off then. - The pen does not draw onto a hidden layer, the hint says so. - Groups are always shown unfolded. - The four order buttons work inside the own group or layer. Tests: - Gate: 204 files, 3067 tests (3008 + 59), exit 0 - e2e 47,48: 108 checks. e2e 39,40,47,48 before the Shift change: 209 checks. No full run, the sum of 1645 (1639 + 6) is reckoned and CI measures it. - 59 unit tests: 36 in tests/core/vector-tree.test.ts, 23 in tests/editor/vector-layers.test.ts - Six e2e checks with a real mouse in block 47j - 47 unit counter-probes for layers and groups and three for the Shift click all fail tests, run on stein2 - Three browser counter-probes fail their checks - Two screenshots looked at (group in the list, hidden layer) - Only unit tested: the row Layer, sorting and removing layers, copying a group, the Shift pan beside the shapes Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> |
||
|
adminandClaude Opus 5.5
|
1aa824ecb4 |
Keep objects through a Load scene with a switch (#165)
A Load scene destroyed every object of the old scene. A player, a HUD or a music object had to be built again in each scene, with its state pushed through shared variables. A top-level object with the new switch Keep on scene load now travels into the next scene as the same entity, with everything below it. - The switch is a common property right under Enabled, off by default, on the asset and on a placed object. The inspector shows the row on top-level objects of a scene only, as answered in the issue. - runtime/keptObjects.ts holds the rules as pure functions. keptEntities picks what travels, objectsToBring copies the stored objects as the run parents them, and bringObjects puts them into the next scene. - World.instantiate takes a handed entity as it is instead of making one. The next syncToModel then writes the run's values into the scene. - BehaviorSystem.release takes the running instances out before the old world is destroyed, and the next system adopts them. They hear no On destroy and no second On start, and their sounds play on. - PhysicsSystem.resume gives a dynamic body the velocity and spin it had. - Duplicates: the object brought along wins. The next scene does not build its own object with the same id, which is the way back into the scene the object came from. - Decided here: the next scene does not build a top-level object of the same asset that is kept itself either. The issue only names the id. With the id alone a level that places its own player would hold two after a swap. - Decided here: kept objects land behind the scene's own, the switch is no animation row, and collisions are found anew. A finding, fixed along with it: Load scene did not build a scene as it is stored, but as the run had left it. A moved object stayed moved and a destroyed one stayed gone. The way back into a scene needs a clean build. - GameRun copies a scene's objects and groups before it first builds it and puts them back before it builds it again. - GameRun.end puts every such scene back. The player calls it on stop, so spawned objects no longer stay for "Click to play again". - The consequence: an edit made in a scene during Play is gone the next time that scene is loaded. Tests: - Gate: 199 files, 2944 tests (2929 + 15), exit 0 - e2e, full run: 1625 checks passed (1619 + 6), exit 0 - Smokes: 24 / 19 / 21, exit 0 - 15 unit tests in tests/core/keep-on-scene-load.test.ts - Six e2e checks in module 35: the switch is set with a real mouse, the child has no row, the object is in the new scene, its counter still reads 1, its sound plays on, and the stored scenes are unchanged after Stop - Eleven tests with fixed row lists only count the new schema row - 16 unit counter-probes all fail tests, run on stein2. One did not fail at first (same id not left out), it has its own test now. - The browser counter-probe fails 4 of the 6 new checks - Not looked at in the browser: the switch as a port of the Properties node, and a released game with a kept object Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> |
||
|
adminandClaude Opus 5.5
|
3e8c88c66d |
Add a node that names the collision layer of an object (#211)
The issue asked for three nodes: Set layer, Set collides with and Layer of. A probe showed that the finding behind the first two is outdated. The Properties node of type Collider already writes both settings while the game runs, and both collision systems see the change at once. As agreed, only Layer of is built, and writing stays with Properties. - Layer of is a data node with the input object and the outputs name and number. The name is what the project calls the layer. - NodeContext.collisionLayerOf answers the number, and the new field collisionLayers on GraphLookup brings the names to the node. - layerHolderOf in solids.ts says whose layer counts. An object stands for its first collider child, a collider or tilemap for itself. - Decided here: a collider that is switched off counts too, because its layer is set either way. - Decided here: without a collider the name is empty and the number is -1. - The node is a read, not a run, so it answers at the moment it is asked. Right after a Set in the same flow it names the new layer. - The output number was not asked for. It fits the layer port of Properties as it is. Changing the layer during a run had no test at all so far. Five tests now hold it in both systems. Tests: - Gate: 198 files, 2929 tests (2914 + 15), exit 0 - e2e 1-6: 285 checks passed (06: +2 for block 6z-x) - Five unit tests for the change during a run: a mover is blocked, passes and is blocked again, a ray with a layer filter follows the change, and a dynamic body falls through the ground in Play - Six unit tests for Layer of, three against each system, and four cases in the node catalog - 6z-x finds the node in the palette, checks its ports and logs "Ghost" and "1" for the owner's collider in a Play run - Two counter-probes for the change during a run fail 1 and 4 tests, and only new ones, so those places were unguarded before - Six counter-probes for Layer of fail 2 to 3 tests each. All eight ran on stein2, not in the container. - The browser counter-probe fails 6z-x with "Layer 1" and "1" - The e2e sum of 1619 is calculated (1617 measured in CI run 276, plus 2). Neither the full suite nor the smokes ran for this state. - Not looked at in the browser: that the layer port of Properties shows the same picker as the inspector. Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> |
||
|
adminandClaude Opus 5.5
|
c1cc80bb45 |
Add nodes that ask whether an animation still runs (#233)
A graph could start, pause and stop an animation and hear it finish, but it could not ask in between whether one runs or how far it is. Two data nodes answer that now. - Animation playing takes an object and an animation and gives playing, progress and time left (s). It answers at the moment it is read: right after Play animation in the same pass it says on, and in the frame On animation finished fires it says off. - With Animation at None it answers for the running animation started last on the object. - Animation length gives the seconds of one pass, from the timeline and the frame rate alone. - The rule is a pure function in src/core/model/animation.ts (playerStatus, leadingPlayer). The nodes reach an animation's length through a new field animation on GraphLookup. - animationPort is exported so both nodes show the same picker as Play animation. Decided in the issue: a Once (reset) counts as running while it blends out, and progress and time left also hold for Loop and Ping-pong, at the place of the playhead. On Ping-pong progress falls again on the way back and time left counts to the next turn. Decided here, the issue says nothing on it: - A paused animation does not count as running. Progress and time left stand still. - One that Stop animation fades out does not count as running, and its time left is 0. - Time left of a Once (reset) includes its blend out. While it blends out progress is 1 and time left is the rest of the fade. Finding, not fixed: on the node the name of the chosen animation overlaps the output label progress in the same row. That comes from the fixed node width in NodeView and was seen in the Fit view only. Tests: - Gate: 198 files, 2903 tests (2891 + 12), exit 0 - e2e 1-6: 282 checks passed, 06 has +2 for block 6z-ix - Nine unit counter-probes fail, 1 to 4 tests each - The browser counter-probe fails 6z-ix with ["false","false"] - e2e total 1615 is computed, not measured in a full run. The smokes were not run. Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> |
||
|
adminandClaude Opus 5.5
|
cfd288c4b7 |
Halve the frame time of a playing scene with a tilemap (#284)
The performance panel showed Physics and Editor as the large parts of a frame in a scene of 222 entities. Nearly all of it came from a tilemap that only stands there. - Whoever writes cells in place now says so with cellsChanged. Only then does cellsVersion compare the content. The comparison ran about 60 times per frame and was the largest single item at 14 percent. - The four writers call it: the painter during and at the end of a stroke, PaintTilesCommand on execute and on undo. A new writer that forgets it stays invisible. - The game view is drawn once per frame in play. With an animated tile in view it was drawn twice, once by the run and once by animate(). animate() now gets the redraw count from the start of the tick. - TilemapField builds the geometry of a mesh only when its source changes: the cells, the tile size, the origin or the image. For that groupByTile and layerRows return the same objects for the same list. - PhysicsSystem skips a tilemap whose source and switch are unchanged. The switch is kept because a map that starts switched off would otherwise have dead colliders once it is switched on. - World.syncToModel looks entities and assets up in a map per pass instead of a linear search per object. Measured on stein2 with a copy of the reference project, ms per frame: Physics 2.64 to 0.97, Drawing 6.89 to 2.56, Editor 1.95 to 1.31. Left open: syncToModel still mirrors every entity every frame. That is its own issue. Tests: - Gate: 198 files, 2887 tests (2883 + 4), exit 0 - e2e 1-17,28,33,39-43,59: 810 checks passed, 40 has +3 - Smokes: 24 / 19 / 21, exit 0 - Three unit tests wrote cells directly and now call cellsChanged - Eleven counter-probes fail. Two did not at first: the stroke needed a check of its own, the physics test has to start with the map switched off. That last one was repeated on stein2 only. - e2e total 1613 is computed, not measured in a full run Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> |
||
|
adminandClaude Opus 5.5
|
6491888f56 |
Stop offering private variables as new animation rows (#270)
A behavior variable switched private is hidden from the placed object and from the Properties node, but the row dialog of an animation kept offering it. Rows that exist already stay as they are, as decided in the issue. - offeredDefs in src/core/model/animation.ts is what the dialog offers now: what the target can animate, less private variables and less what another row animates already. The filter moved there from RowDialog.ts, so it can be tested without the editor. - animatableDefsOf is unchanged. The label and the runtime read it, so a row on a variable that went private keeps playing and keeps its label. - Deviation from the proposal: under Change target the row's own variable stays on offer, private or not. The dialog would open with no property and a disabled button otherwise. Other private variables are not offered there either. - The command does not refuse a private variable. Only the dialog does not offer it. Finding, not fixed: e2e 56 fails when it runs alone, in 56a-ii from #257 (typing "9" did not arrive: focus is BODY). With 55 before it the module passes, so a full run does not show it. It was not measured on HEAD without this change. Tests: - Gate: 198 files, 2883 tests (2882 + 1), exit 0 - e2e 55,56: 27 checks passed, 56 has +56e - e2e 25: 31 checks passed, it uses the same dialog - Three unit counter-probes each fail the new test - The browser counter-probe fails 56e, mood shows up in the dialog - e2e total 1610 is computed, not measured in a full run Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> |
||
|
adminandClaude Opus 5.5
|
5e21d473a4 |
Fix references into nested placements and on asset delete (#285, #286)
Two findings from #269. A reference from a container into a placement nested in it was dead from the start, and deleting an asset left references to the objects it took along showing "(missing)". - A reference is stored the way its holder shows the object. In a container tab that is q~x for content of a nested placement q. - referenceCandidates translates it when the container is placed: in placement r, q~x becomes r~q/x. pathOfId and idOfPath in instance.ts do the mapping, objectChoices offers the same spelling the other way. The rule holds at any depth. - Storing q/x as proposed in #285 was dropped. The container tab would then have had to translate its own ids. - No migration. All projects and snapshots hold three references, none of them with ~ or /. - Create container lets a reference to content of a member placement follow it. It was left dead before. - Paste lets such a reference point into the copy. It kept pointing at the original before. Both go through the new renamedReference. - Delete asset records what every holder shows before the cascade and clears every reference to an object that is gone afterwards, with dropReferencesToGone from #269. The row shows None, undo restores the references (#286). Tests: - Gate: 198 files, 2882 tests (2873 + 9), exit 0 - Unit object-references: 26 passed (17 + 9) - e2e 1-17,57: 566 checks passed, 57 has +57i and +57j - Six unit counter-probes fail between 1 and 3 tests each - The browser counter-probe fails 57i and 57j as described in the issues - e2e total 1609 is computed, not measured in a full run Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> |
||
|
adminandClaude Opus 5.5
|
214218d1b2 |
Clear references to a template object in every scene on delete (#269)
Deleting an object in a container tab only cleared references inside the template. Placements in scenes and other containers kept their instance edit and showed "(missing)" in the inspector. - shownObjectIds records which objects every holder shows before the delete. dropReferencesToGone compares that with the state after it and clears each reference that no longer resolves. - A reference is resolved from its own place with referenceCandidates, the same way the runtime does. One rule covers instance edits, nested placements and full ids like p~crate. - A cleared instance edit is dropped when it now says the same as the template's own value. Without such a value a marked None stays, as if picked by hand, and Reset hands the row back to the template. - All cleared references come back with a single undo. - References that were already dead in saved projects stay untouched. Findings, not fixed here: - A reference from container D into a nested placement q is stored as q~<id>, but the copy is named r~q/<id> in every placement of D. The runtime finds nothing, so that reference is dead from the start. - Delete asset removes placed objects by cascade but does not clear references to them. Tests: - Unit object-references: 17 passed (13 + 4) - Gate: 198 files, 2873 tests, exit 0 - e2e 1-17,57: 564 checks passed, 57 has 13 (+1 for 57h) - Five unit counter-probes and one browser counter-probe fail as expected - e2e total 1607 is computed, not measured in a full run Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> |
||
|
adminandClaude Opus 5.5
|
0f6e628616 |
Check the declared type when a graph writes a typed variable (#271)
A list variable with an item type only kept its shape in the editor. A graph could write any list into it at runtime, and the List node had no type at all. Now the declaration decides what a write may store. - Writing a list into a typed list variable leaves out every item that does not have exactly the fields of the type. The rest is written and the console names each item that was left out, like Add item does. - The same rule holds for typed list fields inside a struct variable and for lists inside typed items, at any depth. - A typed struct variable refuses a struct with a field the type does not have, and a value that is no struct. A struct with missing fields still merges in as before, so a partial Pack keeps working. - The check runs in the Variables node (own variables and Variables assets) and in the Properties node when it sets a behavior variable of another object. - Ports learn their declaration through GraphLookup: what a variable declares about its type, and which behavior owns a graph. The rule itself lives in the new src/core/graph/typedValues.ts, fitsType moved there from SetItem. - The List node gets a Type setting. With a type its items are shaped and marked, follow the struct asset, count when the type is deleted and offer Split into fields in For each. The mark never reaches the running game. - A type on a List node holding something other than structs is refused with a console line. - Setting the List node back to None removes the marks, unlike a list variable. A node list has no per-item type row, so marked items could never be freed there. Undo brings everything back. - tests/core/kinds.test.ts looked for the value as the first parameter of a literal. Type now comes first on the List node, so the test finds the value by its key. Tests: - Gate: 198 files, 2869 tests (2856 + 13), CHECK EXIT 0 - e2e 55: 19 checks (+55j write at runtime, +2 for 55k List node) - e2e 54: 16 checks, smokes 24 / 19 / 21 - Five mutations, each fails between 1 and 4 tests - e2e total 1606 is computed (1603 + 3), no full run Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> |
||
|
adminandClaude Opus 5.5
|
ded71a92c9 |
Pick the target of an object variable in the Scene View (#276)
Choosing the target of an object variable meant finding its name in a dropdown. With many objects, or several with the same sprite, the name alone does not say which one it is. The eyedropper lets you click the object where you see it instead. - Every object dropdown gets an eyedropper button next to it. This covers variables, struct fields and list entries, in the Inspector and in the Variables tab. - The button opens the Scene View or the container tab the object lives in. A strip above the view names the field and the current candidate and offers Take and Cancel. The cursor is a crosshair. - A click picks a candidate and writes nothing yet. The candidate gets its own cyan frame, the selection stays on the object with the variable. - Clicking follows the selection rule. `pickOn` in `src/viewport/pick.ts` uses `pressOn` and only counts objects the dropdown offers. A click on empty space keeps the candidate. - Enter or Take writes through the same handlers as the dropdown. That is one undo step, or none if nothing changes. - Esc, Cancel, a right click in the view or a second click on the button cancel without writing. So do a tab switch, another selection, undo, redo, play and loading a project. - After Take or Cancel the editor goes back to the tab the pick came from. - While the eyedropper runs, the view does not drag, marquee, paint, show handles or open its context menu. Panning and zooming stay. Found on the way: - Started from the Variables tab, the click missed the object. The Scene View is hidden while that tab is open, and the layout skips hidden children. The strip appeared then, the view moved down by 32 px but kept its old height. `Editor.display()` now lays the row out again after showing it. Tests (on melektaus-atx): - unit pick and object-pick: 27 passed, 13 new - gate: 196 files, 2844 tests, CHECK EXIT 0. Two more come from svg-icons, which checks every icon twice. - e2e 57: ALL PASSED, 12 checks, 5 new (57e to 57g) - Counter-checks work. Without the layout fix 57g fails. Picking objects the dropdown does not offer fails 2 tests. Writing on cancel fails 2 more. Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> |
||
|
adminandClaude Opus 5.5
|
6d4247ebf8 |
Paste where the view shows it, editor offsets included (#263)
Paste mixed two frames. The pointer comes from the Scene View, which draws every object moved by the editor offsets of it and its parents. Paste turned that point into a local position through the parents' plain world transform, so the copy landed beside the pointer by the offset of the parent it went into. Without a pointer, an original with an offset of its own had its copy placed beside its game position, which the view does not show. - A copied root now remembers where the view showed it (`ClipRoot.shown`, from `editorTransform`) instead of its world position. - New `editorLocalPositionFor` in `properties/transform.ts` turns a shown point into a local position through the parent chain with the editor offsets, as the view draws it. Paste uses it. - The copy itself still gets no editor offset of its own, as since #240. In the game it stands where it was drawn, minus the offsets of its parents. - Re-parenting under a parent with an offset still keeps the game position, so the object jumps in the view by that offset. That is a different rule from paste and is left as it is. Tests: - Unit (clipboard, groups, references, transform): 50 passed, 2 new. - e2e 51 on melektaus-atx: ALL PASSED, 12 checks, 1 new (51f). - Gate on melektaus-atx: 195 files, 2829 tests, CHECK EXIT 0. - Counter-checks: without the paste fix both new unit tests fail (copy at 540/470 instead of 500/500) and 51f fails by exactly the 60/-40 offset. With the root remembering its world position again, the own-offset unit test fails. - No full run. The e2e total of 1591 is 1590 plus 1. Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> |
||
|
adminandClaude Opus 5.5
|
9b5eeaab57 |
Empty a deleted tile's cells on every tilemap (#268)
Deleting a tile left the cells painted with it in the tilemaps. They drew nothing, blocked nothing and did not show in the delete dialog, but still read as a tile for "Tile at" and stopped a fill. - DeleteAssetCommand empties the cells of a deleted tile on every layer of every tilemap in the same step. Undo puts the tile and its cells back together. - The delete dialog counts them, for example "3 cell(s) on 1 tilemap(s) are painted with it and become empty." (cellsPainted). - presentTile treats a cell naming a missing tile as empty. "Tile at" (World.tileAt) and floodFill use it, so cells already in existing files read and fill as empty. There is no migration. - The brush, the rectangle and the fill check the tile in hand. A tile deleted after it was picked no longer paints new invisible cells, the editor says "Choose a tile to paint with." instead. - Unchanged on purpose: the picker still reports such a cell as naming a tile that no longer exists, and erasing removes it. Tests: - ./check.sh: 195 files, 2823 tests, CHECK EXIT 0 (+6). - GM_STEPS=39,40: ALL PASSED, 100 checks (4 new in 40t). - Full e2e sum is now 1590 (1586 confirmed by CI on round 8, plus 4). - Counter-checks, all fail as expected: 5 in unit tests (delete without emptying, undo without cells, fill and "Tile at" without presentTile, wrong map count) and 3 in the browser (dialog without count, delete without emptying, brush without the check). Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> |
||
|
adminandClaude Opus 5.5
|
14972d057f |
Refactoring round 8: hide data files, safe saves, Esc as Cancel (#85)
Recurring cleanup round over the code since round 7 (
|
||
|
adminandClaude Opus 5.5
|
bc688f3efc |
Refactoring round 7: split BehaviorSystem, fewer copies (#85)
Recurring cleanup round over the code since round 6 (
|
||
|
adminandClaude Opus 5.5
|
24d360aeec |
Add zoom steps and a larger start caption to the game link (#266)
The released game only ever zoomed in whole steps up to 400%, so a small camera on a large screen stayed far smaller than it could be. The "Click to play" caption was drawn in the 11 px panel title size and was easy to miss. - GAME_SCALE_STEPS gains 300%, 500% and 600%. The game tab picker, Auto in the editor and the game link all read the same list. - The start caption takes its size from the new Theme.captionSize (16) instead of a constant in GameScreen. - The player page keeps the default arrow cursor at all times. It no longer switches to the hand over the caption. Tests: - view.test: Auto for 320x180 in 2000x2000 is now 6, with cases for 3 and 5. play-settings.test takes 2.5 and 8 as invalid steps. - e2e 60 checks the caption against the panel title size and the arrow cursor before and after the start. Module 03 follows the new step list. - ./check.sh 2808 tests, CHECK EXIT 0 (before the last Theme tweak, which changes no test). Full e2e run ALL PASSED, 1574 checks. Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> |
||
|
adminandClaude Opus 5.5
|
94c1055895 |
Throttle what the editor shows while a game runs (#265)
With the behaviors fixed, the scene Performance test still ran at about 23 fps with 500 entities. The rest of the frame went to the editor: every spawn or destroy rebuilt the hierarchy with all its rows, redrew the scene view behind the game tab and refreshed every panel. The game itself is cheap. What the panels show of it now follows a preset in the project settings. - New section While playing in the project settings with three presets: Live, Balanced and Minimal. Every project reads as Balanced, including those saved before the setting existed. - Live keeps today's behavior. Balanced brings hierarchy and panel values up to date 4 times a second and stops redrawing the hidden scene view. Minimal updates hierarchy and values only on pause and throttles the graph tabs as well. - The graph and state machine tabs stay live under Balanced. At 4 updates a second the beads on exec edges stutter, and the tabs draw only while on screen. This differs from the issue proposal. - The game itself is never throttled. Pause, step and stop bring every panel up to date at once, and a change of structure that falls between two updates is kept for the next one. - The rule lives in editor/playThrottle.ts as panelPolicy and PanelClock. PlaySession asks it after every frame. - Objects spawned at the top level go into a hierarchy group named after their asset, so hundreds of gold pieces fold into one row. Groups start folded. Measured on a throwaway copy of Performance test, 3 s each, fps: - About 500 entities: Live 38.6, Balanced 56, Minimal 60.6. - About 315 entities: Live 56.9, Balanced 60.5, Minimal 60.6. - p95 frame time at 500 entities: 60 ms, 41 ms and 23 ms. Tests: - ./check.sh: 193 files, 2799 tests, CHECK EXIT 0. - GM_STEPS=1,18,59: ALL PASSED, 54 checks. - Full e2e run (local): ALL PASSED, 1562 checks. - tests/editor/play-throttle.test.ts: presets, update rates, kept structure changes, flush, spawn group and loading old projects. - New e2e module 59: preset chosen with the mouse, measured update rates, scene view behind the game tab, Minimal with pause. - Module 03 now expects spawned objects in their group row after the next update. - Counter-checks: 4 in unit tests and 2 in the browser, each failing as expected. Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> |
||
|
adminandClaude Opus 5.5
|
0c41cb97b1 |
Clip the children of an object to a clip area (#260)
An inventory grid could not scroll, because nothing could cut a child off at an edge. A game also had no way to hear the mouse wheel. Both are needed for a scrolling list, a dialog text or a window with more content than room. - A new object type Clip area has width and height and turns, scales and mirrors with its parent. The size gizmo drags width and height. - Everything below a clip area, on every level, is drawn only inside its rectangle, in the Scene view as in the game. Nested areas cut to their intersection. The rule works on a convex polygon, so a turned area cuts right as well. - On click, Is hovered and On mouse wheel do not hit a cut-off part. The Scene view does not pick it either. - In the Scene view the area is a dashed frame that is grabbed only at its edge, so a click inside lands on the content. The eye under Shape hides the frame. In the game the area is invisible. - While an object below an area or one of its parents is selected, the Scene view shows the cut-off part at 30 % opacity and it can be grabbed there. The rule lives in core/properties/clip.ts. - The Properties node knows the type Clip area. - The new event node On mouse wheel fires by the rule of On click. Its delta counts in notches, positive is down, and a frame's turns arrive as one value. It also gives x and y. Limits: - Only sprites and texts show the faded rest. Tilemaps and particles are cut and can be grabbed when open, but are not shown faded. - Masks by texture shape are out, as noted in the issue. Tests: - ./check.sh: 2773 tests, CHECK EXIT 0. - Full e2e run (local): ALL PASSED, 1549 checks, measured. - tests/core/clip-areas.test.ts: 12 tests for the cut rule, scene and game, save and load, hits, the wheel with and without owner, the notch conversion and the open rule. - e2e 58, 5 checks with real mouse and wheel: the scene cuts (74 of 74 red inside, 0 outside), a click on the cut part picks nothing, the selected rest is faded and grabbable, the game cuts, one notch logs 1. - e2e 04 and 46 count the object types and the eye rows. They now include Clip area. - Counter-checks: 6 in unit tests and 3 in the browser, all fail as expected. The originals were restored and checked with cmp. Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> |
||
|
adminandClaude Opus 5.5
|
89aa92d2e3 |
Put a shader on a text and draw pixel fonts sharp (#169)
A text could not wear a shader, and a pixel font was always smoothed. Pixi's Text takes no custom shader. It also shares one texture between texts of the same content and style, and the filter is not part of that key, so two equal texts with different filters would overwrite each other. - TextPicture rasters a text into a texture of its own and draws it like a sprite. Shader, time animation and edge mode work without a special path. A new text, font or size rasters again and keeps the shader. - The old texture is dropped only after the shader holds the new one. Before, Pixi warned about a destroyed texture that was still bound. - A text has a Shader row with the shader's property rows below, as a sprite has. Overrides, saving, animation and the Properties node (type Text) know them. A shader parameter named like an own row of the text loses to that row, as on the particle source. - The font asset has a Filter row, Linear or Nearest. The row existed three times already (texture, vector art, pixel art) and is now one helper filterRow. - Nearest rasters the text 8 times finer and cuts every 8x8 block to one texel: at least half covered is full, else empty. Chrome on Windows smooths canvas text sideways through DirectWrite whatever filter we set later. The cut removes those half pixels on every system, and the texture stays one texel per world unit. Found on the way: - On a font that is no pixel font thin strokes break apart under Nearest. For a pixel font at its own size this does not matter. Not done: - The preview in the Shader tab does not take a selected text as its picture, it shows the test picture then. Tests: - ./check.sh: 189 files, 2759 tests, CHECK EXIT 0. - text-shader.test.ts with 10 tests: rows and name precedence, a clamped override, save and load, animation, the font filter, and sharpCoverage on a smoothed edge and at the texture border. - e2e 30 has 7 new checks: red glyphs through the shader picked with the mouse, the shader survives a new text, red in the game, soft edges under Linear, clean 4x4 blocks under Nearest, and half covered texels (Linear 238, Nearest 0). - Full local run before the Nearest cut: all passed, 1543 checks. GM_STEPS=1,30 on the final bundle: all passed, 32 checks. The sum 1544 in the README is counted from these two runs, not measured. - Counter-checks fail as expected: in the browser no shader on a text fails 30h-30j, an always linear sampler fails the Nearest check, the old 1:1 raster leaves 107 half covered texels and fails 30k-ii. Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> |
||
|
adminandClaude Opus 5.5
|
ef2600493f |
Read the pixel size of a texture in a graph (#262)
A graph had no way to know how big a picture is. An icon sprite with a fixed size therefore stretched every icon of another size, an 8x8 pixel-art icon in a 16x16 slot was drawn twice as big. - New data node Texture size. It takes a texture, a frame or a pixel art and hands out width and height in pixels, 0 x 0 for none. Wired into a sprite's width and height, the picture shows pixel for pixel. - GraphLookup gets textureSize. The project answers it with the same pictureSize rule a sprite uses to size itself. Tests: - ./check.sh: 2749 tests, CHECK EXIT 0. - 2 catalog cases (a picture, no picture) and one test against a real project: pixel-art sheet, single frame, missing texture. - No e2e check and no counter-check for this node. Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> |
||
|
adminandClaude Opus 5.5
|
f84defb9b6 |
Pick an object of the same scene for an Object variable (#258)
An Object variable could only be set by a graph while the game runs.
A placed object always showed "(null)", although the other objects of
its scene are there to choose from and the runtime can already find
any object by its id. Now the placed object stores a reference to one
of them, and the running game turns it into the real object.
- Stored as {"$object": "<id>"}. The empty placeholder stays as it
was, so old projects load unchanged and empty still means "(null)".
- The row of an Object variable on a placed object is a dropdown with
None and every object of the scene, indented like the Hierarchy.
The same goes for Object fields in structs and Object items in
lists, also in the Variables and List tabs.
- The behavior asset keeps "(null)". An asset has no scene, so "Apply
to asset" is gone from Object rows.
- The runtime resolves the reference when the Variables or Properties
node reads it. A destroyed target reads as null, a missing one shows
"(missing)" in the row.
- Inside a container only objects of the same container are offered.
The reference keeps the template id, so every placement finds its
own copy.
- Deleting the target clears the reference in the same undo step.
Paste points references inside the pasted group at the copies and
leaves outside references alone. Create container and Unpack carry
references along with the new ids.
- A value a graph writes while running stays in the run. The scene
keeps the picked object, also in "Run in editor".
Found on the way:
- Setting an override coerced every object slot to empty, in plain
values, struct fields and list items. The shared objectPlace() now
keeps the reference.
Not done:
- No eyedropper to pick in the scene, the dropdown is enough for now.
- Deleting a template object in the container editor does not clean up
references in other scenes. They read as null there.
Tests:
- ./check.sh: 187 files, 2724 tests, CHECK EXIT 0
- e2e 1-9, 51, 57: ALL PASSED, 389 checks
- e2e 1, 57 on the final bundle: ALL PASSED, 17 checks
- 13 unit tests in object-references.test.ts, 5 checks in e2e 57
- Counter-checks: 8 unit breaks fail their tests, the browser break
without a pick list fails 57b-57d
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
|
||
|
adminandClaude Opus 5.5
|
e8b3ac0a3b |
Keep behavior variables private to their own graph (#257)
A behavior often needs working state such as a timer or a counter. Until now every variable showed up on each placed object and in the Properties menu, so the inspector filled up with values nobody should touch. A private variable works like any other inside its graph but is not offered anywhere outside. - Each behavior variable gets a lock switch next to Keep. It starts off, so existing projects stay as they are (`privateVariables`). - A placed object shows no private variable, neither in the inspector nor while the game runs. If all are private, it says so. - Switching a variable to private drops its overrides on every placed object in one undo step. Switching back does not restore them. - A running game does not write a private value back as an override, and a project change during the run does not reset it. - `+ Property` no longer offers private variables. A port that names one by hand still reads and writes it without a warning. - The default value of a private variable is read-only in the asset inspector. Its shape (name, fields, type, delete) stays editable. - Keep is now a pin icon instead of a word. With the lock added, the header of a list variable had no room left and the lock covered `+ Item`. Not done: the animation track picker still offers private variables. Tests: ./check.sh -> 186 files, 2711 tests, CHECK EXIT 0. e2e 1,19,20,21,56 -> ALL PASSED, 119 checks. New module 56 has 7 checks with a real mouse. Counter-checks fail as expected: unit without the write-back filter, the sync guard, dropping overrides or loading the flag. Browser with all variables on the object, an unfiltered menu, or no value lock. Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> |
||
|
adminandClaude Opus 5.5
|
cf6565d108 |
Start new behavior variables with Keep switched off
Keep is a choice the author makes per variable. Switching it on for every new variable meant most behaviors carried state across runs that nobody asked for, and the toggle had to be turned off by hand. - AddVariableCommand no longer adds a new variable to keptVariables. Keep is only switched on by hand. - Existing projects are unchanged. Their keptVariables stay as saved. - The comment in Asset.ts describes the new default. - The counter fixture in keep-state.test.ts now keeps count explicitly instead of relying on the old default. Tests: - ./check.sh: 2706 tests, CHECK EXIT 0 - e2e 1, 6, 19: ALL PASSED, 172 checks - 19c-ii expects [] after adding, then ["var1"], [] and ["var1"] after undo, all clicked with the real mouse - Before the fixtures were adjusted, 8 unit tests failed on the new default Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> |
||
|
adminandClaude Opus 5.5
|
38e0f656be |
Split a struct output into one pin per field (#256)
Reading one field of a struct needed its own Expand node, even where the graph already knows the struct type. A split output shows the fields directly on the node, so a Find … Match test becomes a single Equals and the wires keep running left to right. - Right-clicking an output pin offers "Split into <Type> fields" when the type is known and "Split as …" for every other struct asset. The output is replaced by one pin per field with the field's kind. - The type is known for typed struct variables, typed Pack/Expand, fields of another split and item of For each, Find, Match and Item at over a typed list (portSplits.ts). - Right-clicking a field pin offers "Recombine". Splitting drops the edges of the whole output, recombining drops the field edges. One undo step brings them back. - The split is stored as GraphNode.splits and saved with the graph. Copy and paste carry it along. - Field pins follow the struct asset like a typed Expand. A new field gets a pin, a removed field loses pin and edge, a renamed field keeps its edge. Deleting the asset keeps the last fields. The delete dialog counts splits, so it now says "node(s)" instead of "Pack/Expand node(s)". - Renaming a variable carries its split and the field edges along. - At run time the node still produces the whole value. A field pin reads its field like Expand, a missing field reads as empty. - Limits: outputs only, one level, behavior graphs only. Tests: - ./check.sh: 185 files, 2706 tests, CHECK EXIT 0 - e2e GM_STEPS=1-6,54,55: ALL PASSED, 303 checks - New port-splits.test.ts with 12 tests. e2e 6z-vi with 3 checks using a real mouse: split Find.item, wire item.Name into the test and Match.item.Amount into the log (logs 7), recombine. - Counter-checks: without field reads in the interpreter, without rename in the split, without moving edges on rename and without cleanup on field removal one unit test fails each. In the browser, without field reads nothing is logged and without type inference the split entry is missing. - Check total in README: 1520. Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> |
||
|
adminandClaude Opus 5.5
|
b0d0868f55 |
Give a list one struct type so every item keeps its shape (#254)
A list of structs used to let every item carry its own fields. Adding an item meant typing the same fields again, and nothing kept the items in step with the struct asset from #253. A list can now name a struct type for its items, and the asset keeps them in shape. - A list variable and a list field get the row Items with Mixed, every struct asset and Make struct type. Make struct type collects every field any item has, so no item loses a field. - A typed item carries its type under the key `$struct` (ITEM_TYPE_KEY). listItems does not count it as a field. - A list that holds anything but structs refuses a type, also when the offending item sits in an override. The console names the list and the count, and the list stays as it was. - In a typed list `+ Item` adds an item with the defaults, without the kind menu. Field names are locked, values stay editable. - The rows of a typed item take their kind from the struct asset (declaredKind in InlineList.ts). An asset field shows the asset picker instead of a text field, as reported in the issue. - A struct item in a mixed list gets its own Type row. Switching a list back to Mixed keeps the type on each item. - syncStructTypes brings marked items into shape and carries renames into them, also inside overrides and nested lists. One undo step. - The delete dialog of a struct asset also counts typed lists. - The game never sees the key. World and sharedState strip it with withoutItemTypes and bagWithoutItemTypes, so a struct stays a plain object at runtime. - Add item and Set item get the setting Type. With a type they only accept a struct with exactly its field names (fitsType in SetItem.ts). Anything else is left out and logged. - The item indent from #252 is back to its old width, the narrow one squeezed the value fields. Not done: writing a variable does not check the type, and the List node offers no type. Found on the way: a test helper in list-of-structs.test.ts called nodes without params. It now passes the same arguments as the interpreter. Tests: - ./check.sh: 183 files, 2679 tests, CHECK EXIT 0 - e2e GM_STEPS=1,21,22,32,54,55: ALL PASSED, 150 checks - e2e GM_STEPS=1-6,21,22,32,54,55 before the follow-up: 404 checks - New: tests/core/typed-lists.test.ts, e2e module 55 with 13 checks - Counter-checks bite in unit and browser, originals restored by cmp Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> |
||
|
adminandClaude Opus 5.5
|
61bbb96a96 |
Define a struct once as an asset and reuse its shape (#253)
A struct used to declare its fields wherever it stood. The same shape in two variables meant typing it twice, and Pack/Expand copied it once without staying in sync. A Struct asset now holds the shape in one place, and every struct that picks it as its type follows it. - New asset type "Struct" (not placeable, group Structs, own icon). The inspector shows its fields with name, kind and default value, and "Open" shows them in the variables tab. - Struct variables and struct fields get a Type row: own fields, any Struct asset, or "Make struct type". With a type the fields come from the asset and cannot be added, renamed or removed there. The values stay per variable, overrides on placed objects still work. - Pack and Expand get the setting Type. With a type their ports are the fields of the asset and read-only in the inspector. - A change to the asset reaches every typed place in one undo step (syncStructTypes). A new field arrives with its default. A removed field goes along with its port, edge and typed value. A renamed field keeps its value in variables, overrides and on ports with edges, also through nested types. - Undo for these edits records plain assignments (Recorder), because the reach of a change is not known in advance. - Cycles such as Loot in Loot, also through another type, are refused and not offered in the picker. - Deleting the asset names how many places use it. Afterwards each place keeps its fields as its own. - Loading reshapes a stale copy in a project file to its type. - "Make struct type" creates an asset from an existing struct and links the place to it. Differs from the plan: - A changed default value applies to new fields and newly typed places only. Existing values stay. - Removing a single field shows no warning. Undo brings it back. Typed lists are left for #254. Lists stay dynamic for now. Found by e2e: after deleting or renaming the type the inspector did not rebuild and kept showing the old name. Fixed, the check was red before. Tests: - ./check.sh: 182 files, 2661 tests, CHECK EXIT 0 - GM_STEPS=1,4,21,22,54: ALL PASSED, 176 checks - 14 unit tests in tests/core/struct-types.test.ts - New e2e module 54 with 14 checks, real mouse. Module 04 counts 23 asset types. - Counter-probes: without the rename pass 4 unit tests fail, without reshaping values 8, without the cycle rule 1. In the browser, without spreading changes and with + Field despite a type, 3 checks fail. Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> |
||
|
adminandClaude Opus 5.5
|
393b8ec7f9 |
Build your own easing curve and use it on keys and Lerp (#247)
The built-in eases cover the usual shapes, but a game often wants its own: a coin that bounces twice, a door that overshoots and settles. A new asset type holds such a curve, and keys and the Lerp node can pick it instead of a built-in ease. - New asset type "curve": points like in Vector art, x is t and y is the value. A new curve is the straight line from (0, 0) to (1, 1). - One pure evaluation in src/core/model/curve.ts serves the timeline preview, the running game and the Lerp node. - The curve always has one value per t. The end points stay at t 0 and 1, points cannot pass each other, and a handle that reaches past its neighbour is shortened along its direction. Loading a hand-edited file applies the same rules. - Curve tab: click on the line to insert a point that keeps the shape, click on free space to put one there, drag points and handles, double-click or Delete removes, Alt-click toggles round and sharp. Every step is one undo step. - Presets: all 30 built-in eases plus Linear, fitted with adaptive subdivision. Each stays within 0.4 % of the built-in ease. - Preview: a dot runs along the curve once a second, a second dot shows only the value. The Preview button stops it. - Animation keys get "Curve" under Easing with a curve picker. Lerp gets "Curve" under Ease, and its result may overshoot b. - A missing or unpicked curve runs linear. The inspector says so, the node shows it as a problem, and deleting a used curve warns with the number of keys and Lerp nodes. Tests: - ./check.sh: 180 files, 2612 tests, CHECK EXIT 0 - GM_STEPS=1-6,25,53: ALL PASSED, 309 checks - New e2e module 53 with 13 checks, all with the real mouse. Expected values come from its own Bezier evaluation. - Counter-checks bite: without Bezier evaluation 4 unit tests fail, without handle clamping 2. In the browser, a key that cannot find its curve, a click that sets no point and a handle drag that moves the point all turn checks red. Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> |
||
|
adminandClaude Opus 5.5
|
53fa63441b |
Group scene objects in the hierarchy, for the editor only (#241)
A scene with a hundred crates fills the hierarchy with a hundred rows. Groups bundle top-level objects under one folder row that folds away. They exist for the editor only. Parenting, positions and the game do not see them. - Model: a scene or container template holds a list of groups, an object may carry a groupId. Old projects load unchanged. Loading drops empty groups and members that are no longer top level. - Only top-level objects can join a group. Parenting a member takes it out of the group, and Undo puts it back. There are no groups in groups. - Order: treeOrder lists the members together, where the first one stands. The same order decides drawing at equal z, in the editor and in the game, so the hierarchy and the picture cannot disagree. The stored object list stays untouched when grouping. - Hierarchy: a group row shows a folder icon, the name and the member count. Clicking it selects all members and keeps it folded. Selecting a single member elsewhere unfolds it. Folding lasts for the session. - Create with "Group..." in the object menu. A name dialog asks first, so creating is one Undo step and Cancel creates nothing. - The group menu has Select members, Rename... and Ungroup. The object menu adds "Remove from group". - Drag and drop: onto the group row appends, into a gap between members inserts there, next to a row outside leaves the group. Dragging the group row moves all members as a block. The drop rules live in hierarchyDrop.ts as a pure function. - Copy and paste keeps a top-level copy in the group of its original. A container built from group members takes their place in the group. - Clicking an object that is already selected together with others now keeps only that object selected. ListView narrows the selection on release, so a drag starting on such a row keeps the selection. Not checked in the browser: groups in the container tab, "Remove from group", Ctrl-click on a group row and a drag out of a multi-selection. The code path covers them. Tests: - check.sh: 177 files, 2552 tests, CHECK EXIT 0 - e2e 1, 51, 52: ALL PASSED, 31 checks (new module 52) - 19 new unit tests in object-groups.test.ts and hierarchy-drop.test.ts - 9 counter-probes, all fail as expected (7 unit, 2 in the browser) Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> |
||
|
adminandClaude Opus 5.5
|
2b89292eb4 |
Copy and paste scene objects and graph nodes (#240)
Copy and paste only existed for animation keys. Building a scene or a graph meant placing every object and node again by hand, even when the same arrangement was needed twice. - Ctrl+C copies the selected objects with their whole subtree, or the selected nodes with their links, groups and comments. Ctrl+V pastes into the scene, container or graph of the visible tab. - The copy is a snapshot in the editor's own clipboard, in memory. It holds asset ids, so the system clipboard is not used. It is cleared when another project opens. - A paste lands under the mouse pointer when it is over the view, and keeps its arrangement. Otherwise it lands one grid step beside the original. Each further copy that still exists moves one step on, so an undone copy does not count. - Objects get new ids for the whole subtree. They paste into the one selected object and keep their look under the new parent. If that object is the original or an earlier copy, the paste lands beside it instead of nesting deeper with every Ctrl+V. - A placed container stays a container. Content copied out of a container pastes as plain objects. Pasting a container into its own template is refused. - Nodes paste only where the palette would offer them. A second Start or End, a State in a behavior or a behavior calling itself is left out, and a notice names what was dropped. - Menus: Copy and Paste in the object menu, a new Paste menu on empty scene space, Copy in the node and box menus, Paste in the palette. - Ctrl+V still imports a picture from the system clipboard when the copy does not fit the tab. While objects are copied, the scene and container tabs use Ctrl+V for them, as the timeline does for keys. Not checked in the browser: paste in the container tab, in state machine, shader and particle graphs, and from the hierarchy menu. The shared code path covers them. Tests: - ./check.sh: 175 files, 2531 tests, CHECK EXIT 0 - e2e 51 (new): ALL PASSED, 11 checks with real keys and clicks - 13 unit tests in tests/editor/clipboard.test.ts, one of them pins the grid step after undo found during e2e - 7 counter-checks all fail as expected (6 unit, 1 in the browser) Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> |
||
|
adminandClaude Opus 5.5
|
7e829f737e |
Load every picture of a project ahead so animated tiles don't flicker
A texture was fetched only when it was drawn for the first time. Until the file arrived, the tilemap skipped the cell for that frame. An animated tile whose next step sat in another picture therefore blinked away once on its first cycle, and sprite animations did the same. - FileLibrary gets preload(files). It requests every file that is not held, loading or known to have failed. Each library reports what it holds through holds(). - src/core/model/projectFiles.ts lists the files a project names per library: uploaded textures, fonts and pixel art cels. - App.ts runs the preload on every project event. That covers opening a project, new assets and edits from a collaborator. - A new test hook __gm.heldPictures() reports which textures of the project are in memory. Not done on purpose: - The tilemap keeps no fallback frame while a step is still loading. - Sounds still load on first play. Not checked: the flicker itself was not reproduced in the browser, the e2e check measures "held in memory". Modules 42, 44 and 47 read textures from the project and were not run locally. Tests: - ./check.sh: 174 files, 2518 tests, CHECK EXIT 0 - e2e 39 + 40: ALL PASSED, 96 checks - 3 new unit tests for preload and the project file list - New e2e check 40k-ii: an unplaced picture is held after a reload - Counter-probe: without the preload 40k-ii fails with "Autotiles: held false, unworn: held false" Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> |
||
|
adminandClaude Opus 5.5
|
6015869297 |
Let the scene view hide symbols, names and shapes per asset kind
The scene view gets crowded once a scene holds many behaviors, colliders and tilemaps. A new eye button in the topbar opens a list of all placeable asset kinds, and each row has toggles for what the scene view draws for that kind. - The popup lists all 9 placeable kinds from Behavior to Tilemap, with the columns Symbol, Name and Shape. It stays open while switching. - Sprite, Text and Tilemap draw no symbol, so their symbol toggle is greyed out. Their name toggle shows a new centred name tag, which is off by default. - Shape exists for Collider and Tilemap. A hidden collider outline is neither drawn nor clickable. A hidden tilemap shape removes the collision outlines and the paint tint, the tiles stay visible. - A hidden symbol takes no slot in the ring and draws no dashed link to its parent. A name that stays on moves to the centre of the object. - The setting lives in the project as `sceneVisibility`, not in localStorage. Older projects load with the defaults, which match the view as it was. - Switching has no undo step, like the game scale. It only changes the view. A change made during Play survives Stop. - The rules sit in `src/core/model/sceneVisibility.ts`, the popup in `src/editor/panels/SceneVisibilityPopup.ts`. Four new SVG icons. Not covered by a check: symbol off with name on for a kind with a symbol, Text and Tilemap with names, and the paint tint with shape off. Tests: - ./check.sh: 173 files, 2515 tests, CHECK EXIT 0 - e2e 46: ALL PASSED, 17 checks. 46g clicks the popup, lays a small tilemap over the crate and removes it again. - e2e 8 alone on a fresh seed: ALL PASSED, 23 checks. A red check in the partial run 2,8,46 came from the module selection. - 8 new unit tests in tests/editor/scene-visibility.test.ts. - 4 counter-probes, each fails its test: load ignores the saved value, Play skips the saved model, scene view ignores collider shape, scene view ignores tilemap shape. Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> |