a848cf846958b76445bc0b9d1686214e2f3efd60
128
Commits
| Author | SHA1 | Message | Date | |
|---|---|---|---|---|
  adminandClaude Opus 5.5
|
a848cf8469 |
Pick a new asset from category submenus in the + menu
The + menu was one long list in two groups, placeable types and library ones. That split is no longer wanted. The menu now lists the categories of the asset panel, and each opens its types beside it, so a new asset is filed where the panel shows it. - Menu learns submenus: an entry with submenu instead of onSelect opens a second Menu right of the first, or left of it where the canvas ends. Its first entry lines up with the row that opened it. - A submenu opens on hover or click. Resting on another entry swaps or closes it after 150 ms, so a pointer cutting across the rows on its way into a submenu does not lose it. - The row of an open submenu stays lit, and a triangle pointing right marks every such row. - A submenu has no backdrop and no Escape of its own. Popup takes a backdrop option for that. The first menu's backdrop and Escape close the whole stack, and picking an entry does the same. - assetMenuCategories replaces assetMenuGroups and takes categories and their order from ASSET_GROUPS. The types are sorted by label. - New test hooks __gm.menuSubmenus() and __gm.addMenuCategory(). pickAssetType opens the category first, so the modules that pick a type through it need no change of their own. Modules 04, 10, 47, 48, 53 and 54 open the category themselves where they read the menu. Tests: - Unit asset-menu: 4 green - e2e 04: ALL PASSED, 63 checks. New: categories in panel order, each type once and sorted, submenu placement, hover swaps the submenu, picking closes menu and submenu - Gate: CHECK EXIT 0, 261 files, 4040 tests - The other modules that use the + menu did not run here Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> |
||
|
adminandClaude Opus 5.5
|
5e09ba9a50 |
Group the asset panel by category, then by type
The asset panel listed one heading per type, 30 of them side by side. Now the types sit under five categories, and each type heading reads like its entry in the + menu. - ASSET_GROUPS replaces ASSET_GROUP_LABELS and gives every type a name and a category: Basics, Visuals, Logics, Physics or Audio. - The categories keep that fixed order. The groups in a category and the assets in a group stay sorted by name. - A category heading folds like a group heading. A project opens with every category open and every group folded, as before. - Selecting an asset unfolds its category and its group. Folding the category of the selected asset lets go of the selection. - The headings are singular now (Scene, Sprite, Sound FX). The old plural names only kept them apart from the + menu entries. - locate looks in the popup layer first. A click by text meant for a menu entry hit the heading of the same name, since the panel is drawn first. Below an open menu a click only closes the menu anyway. - New test hook __gm.assetCategories(). Tests: - Unit asset-groups: 6 green, counter-check (empty categories kept) 1 red - e2e 04: ALL PASSED, 63 checks (1 new). Counter-check with locate taking the first hit again: 2 red, the click on Behavior created no asset - Gate: CHECK EXIT 0, 261 files, 4040 tests - The category names got their final plural form after these runs. The unit test ran again on them (6 green), e2e 04 did not. Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> |
||
|
adminandClaude Opus 5.5
|
8154569405 |
Fix the two checks the full run 304 found red
The full CI run on
|
||
|
adminandClaude Opus 5.5
|
4c7861b5b8 |
Keep the frame rate up while painting a big tilemap (#347)
Painting on the 60x60 map of a project with fifty objects dropped the editor to 20 to 39 fps. A profile of a brush stroke showed four causes, none of them the brush itself. - Each frame of a stroke previews the model. The asset and hierarchy panels then built every row anew, so every label became a new text and a new upload to the GPU. One run spent 46 % of the main thread in those uploads. ListView.setItems now keeps a row whose item draws the same (sameListItem) and builds only the rows that changed. - The brush drew the whole scene on every pointer event, on top of the preview. Now the preview draws what the stroke changed, once a frame. The rectangle tool asks for one drawing a frame for its box. - An animated tile made the view draw in the tick and the preview drew it again in the same frame. animate now asks just before the frame is drawn and stays out when the view was drawn since the tick began. - layoutSymbols ran on every drawing and costs up to the cube of the symbols. SymbolLayoutMemo keeps the spots while no anchor moves. - A painted cell made the map read every "x,y" key again, and once more for each of the eight neighbours of every cell. layerCells reads a layer once per content into an index by place. layerTiles and the blocking cells take their neighbours from there (neighboursIn). parseCellKey reads a key without split, with the same results. The test hook sceneRedraws counts how often the scene view was drawn. Not done: a painted cell still works out the tiles and blocking cells of the whole map again, so that part grows with the map. Tests: - Brush stroke on a copy of the project (stein2, Chrome): 20 to 39 fps before, 47.5 after, 55 to 57 without painting. Labels drawn again during the stroke 2012 before, none after. Scene drawings per frame 1.32 before, 1 after. - One painted cell, headless: 28 to 16 ms on 60x60, 109 to 49 ms on the same map doubled to 120x120. - frame-preview: 2 new, red with the old pointer redraw. - tilemap: 3 new (key reading, index, refresh), list-ping 1 new, symbol-layout 1 new. 5 single reversals turned each red. - e2e 39,40 (melektaus-atx): ALL PASSED, 107 checks (1 new, a fast stroke: 6 drawings in 6 frames, no label drawn again). With the row reuse and the pointer redraw reverted it fails: 24 drawings in 3 frames, and the panels draw their labels again. - Gate (melektaus-atx): CHECK EXIT 0, 260 files, 4038 tests. Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> |
||
|
adminandClaude Opus 5.5
|
d505f6ed27 |
Show what the song plays around a pattern as ghost notes (#339)
A bass line is written against the chords it goes with. Until now the piano roll showed only the pattern itself, so writing a part to fit the rest of a song meant switching between the Pattern and the Song tab. - A double-click on a pattern item remembers song, item and the round clicked into for that pattern. The place lives in the session, not in the project, and goes by the item's id, so moving the item moves the ghost notes along. - Opened from the Assets panel, the pattern shows the item of the last double-click. Without one, a pattern that lies in exactly one item of all the songs shows that item's first round. - Ghost notes are the pattern items of the other tracks all along the song, and on the own track the items before and after and the other rounds of the item. The round edited itself does not count. Sound items have no notes. - A ghost note sits on the row it sounds with: its own transpose, less the transpose of the item the pattern was opened from. - The roll draws them grey, without an edge, under the notes. Resting on one names its track and its pattern. - The header has a Ghosts switch, on by default, and names where they come from, e.g. "Tune · Bass · bar 5". - The time axis pans back to the start of the song, with bar and grid lines before the pattern. Fit still frames only the pattern. - A click or a paste outside the pattern no longer lands. Before, only the time left of bar 1 was closed, notes could still be drawn past the end, where they are kept but never played. - The rounds of a pattern item are now worked out in one place, itemNotes() in song.ts, which songSequence() and the ghost notes share. Tests: - Unit ghosts (new): 5 green. Counter-check with the round edited not left out and the own transpose not taken off: 2 red. - Unit piano-roll: 1 new (pan back to the song, lines before bar 1). Counter-check without the song's start: red. - e2e 65 (melektaus-atx): ALL PASSED - 38 checks (3 new). The first run was red on the tooltip check: the ghost note it rested on lay a fifth up, outside the rows Fit frames. The test now uses a tone. - e2e 64 (melektaus-atx): ALL PASSED - 30 checks. - Gate (melektaus-atx): CHECK EXIT 0, 260 files, 4027 tests. Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> |
||
|
adminandClaude Opus 5.5
|
c33d6d98e5 |
Keep a song item's left edge from snapping on to its own end
Dragging the left edge of a song item to the right snapped to the grid and to the points where the item's content starts again. One of those points lies exactly on the item's end. When the edge caught it, the item shrank to a single tick and showed as a thin white line. The right edge already refused to snap back on to its own start, the left edge had no such rule. - trimDelta: a snapped start on or past the item's end now takes the last grid line before the end instead. - If that grid line lies before the current start, the start stays where it is. - Free trimming with Alt or Shift is unchanged and may still shrink the item to one tick. - Dragging the left edge far past the end now leaves one grid step, as the right edge already did, instead of one tick. Tests: - song-edit unit tests: 14 green (2 new expectations, 1 changed) - Counter-check with the rule removed: 2 red (1399 instead of 960, 1919 instead of 1800) - Prettier, ESLint, tsc clean Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> |
||
|
adminandClaude Opus 5.5
|
b519cd192f |
Send a track, a pattern item or a whole song through a sound FX (#346)
A sound FX could only be put on a single sound. Now a track, a pattern item, a Play pattern and a Play song send everything they play through one chain of it, as an insert in a DAW. A Play note gets one of its own. - Track: an FX box in the head next to M and S opens a menu of the project's sound FX, and the track's inspector has the row too. Order: items, track FX, volume, pan. - Pattern item: Sound FX in its inspector. Its notes play on a bus of their own into the track's bus. - Play pattern and Play song take fx and fx params. The chain sits on the master of the playing, after the tracks and before the level and the fades. Set sound FX parameters reaches it by the playback. - Play note takes fx and fx params next to the instrument's params. The FX parameters go by "fx:" so the two sets stay apart. Set sound FX parameters on a note changes a name both have in both. - A Pitch on a bus is a new PitchShifter: the phase vocoder of the PitchPlayer, fed while it plays. It cannot look ahead and is exactly one frame late at every pitch, 2048 samples. - That latency is made up. The other way of a Mix is held back by a delay of the same length. Every note and clip starts as much earlier as the buses it passes are late. The scheduler plans that much further ahead, and the first note waits that much after Play. - The Song tab waits for the chains before it plays and lets its buses go a moment after Stop. A playing in a game lets them go after its echoes and what the shifters still hold. - songBuses moved to its own file. Kept in song.ts it pulled the FX compiler into the node registry through an import cycle. Decisions of the user: one chain for the whole (1a), FX everywhere asked for (2a), Set sound FX parameters on playbacks (3a), and a pitch shifter of its own with exact latency compensation for a Pitch on a bus. Tests: - Unit pitch-shifter (new): 11 green. At 0 semitones the output is the input 2048 samples later, off by at most 1.2e-7. - Unit sound-library: 84 green, 8 new. Counter-checks (no early start, no Mix delay, chain made every time, tune misses the master) each turned their test red. - Unit bus-fx (new): 6 green, 4 counter-checks red. Scheduler ahead: 1 new, its counter-check red. - e2e 65 (melektaus-atx): ALL PASSED, 35 checks, 4 new, first run. Chrome at 44.1 kHz: the bus was 0.046440 s late, the note started exactly that much early. Offline the shifter moved 1 kHz to 2000 Hz and passed a click 2048 samples later. - Gate (melektaus-atx): CHECK EXIT 0, 259 files, 4021 tests. Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> |
||
|
adminandClaude Opus 5.5
|
af9b202100 |
Keep the game's music when Play ends a run in the editor
A behavior with "Run in editor" kept its world until the frame after Play. By then the game's On start had already started its pattern or song, and ending the editor run called stopAll() on the sound library. The game came up silent. This is what turned the game blocks of e2e 64 and 65 red in suites 542 and 550. - EditorRun.modeChanged() ends the run the moment the mode leaves edit. enterPlay() announces the mode before the game is built, so the editor run's sounds stop first and the game's start after. - The Editor wires the mode event to it instead of invalidate(). Tests: - e2e 64 starts its game with an idle "Run in editor" behavior in the scene. Without the fix it fails like CI did, "game": [] and 2 FAILED. With it: ALL PASSED, 30 checks (stein2). - Unit editor-run: 21 green, 1 new. - Typecheck, ESLint, Prettier clean. Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> |
||
|
adminandClaude Opus 5.5
|
f1f4a57589 |
Cut a sound to a stretch of its file in its own Sound tab (#343)
A sound asset now opens in a tab that shows its file as a waveform. Two handles set where the sound starts and ends in the file, and that stretch is the sample: Play sound, a song item and an instrument's Sample all play it and nothing else. The file itself is never changed. - The asset has three new rows: Start (s), End (s) and Edge fade (ms). End 0 is the end of the file, the fade is 10 ms by default. Older assets have no values and play the whole file as before. - Every way of playing asks playedSoundOf() for a name instead of the file: the file, or <file>#<start>~<end>~<fade> for a cut. - SoundLibrary makes the cut from the decoded file the first time that name plays and ramps each edge inside the file over the fade. Length and peaks of a cut are read from the file without a copy. - Cut buffers can be made again at any time, so the library lets the oldest go past 64 Mi samples. A voice holds its buffers itself. - The tab draws min/max per pixel from 256-sample block peaks, and the samples as a line when zoomed in far. Wheel zooms, the middle button pans, as in the music tabs. Wave, cut and ruler sit under a mask, so a handle panned out of view does not draw over the panels beside. - Dragging a handle moves that edge, dragging elsewhere spans a new stretch. One drag is one undo step for both edges. Whole file puts the handles back, Play or Space plays the stretch with a playhead. - The inspector preview and the Sound FX preview play the cut too, and the song lanes draw and repeat it. Tests: - Unit: sounds 20, wave-view 8 (new), sound-library 68, plus 258 in the touched areas (instrument, song, pattern, inspector, tabs) - e2e 34 on melektaus-atx: ALL PASSED, 57 checks (7 new) - Gate on melektaus-atx: CHECK EXIT 0, 253 files, 3936 tests Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> |
||
|
adminandClaude Opus 5.5
|
5b96d0b329 |
Paste under the pointer and pull song items out left in music tabs
A round of fixes to the Pattern and Song tabs: where a paste lands, what Shift does on a drag, how far the rows zoom, and how an item of a song is sized at its ends. - Shift does what Alt does on a drag: off the grid, on the tick. A Shift click on a note or an item still adds or unpicks it. A Shift press only decides on letting go: no drag toggles, a drag moves. - Ctrl+V lands under the pointer. The earliest copy goes on the grid line before it, the highest note on its row or the topmost item on its track, held to the keyboard or the tracks there are. Off the grid or left of bar 1 it lands at the start of playing as before. - The rows of the piano roll zoom to 64 px instead of 28, the tracks of a song to 320 px instead of 160. - Fit in the Pattern tab zooms the rows as well, so the notes fill the height, no longer held to the default of 14 px. - An item of a song can be pulled out by its left end past the start of what it plays, which then repeats. The offset goes round to the end of a round. A sound not loaded yet still stops at its start. - Both ends of an item snap to the start of a round of what it plays as well as to the grid, whichever is nearer. The end of a round between two ticks is cut to the tick before. A start put within half a tick of a round goes right on it, so it plays from the very beginning. - An offset past a whole round is not folded back to 0, so a pattern that grows later still plays from where the item said. - A middle-drag pans past the first and the last row, as it pans left of bar 1: the highest note or the first track up to half the height down, the other end up to half the height up. The room past them is dark in the piano roll and empty in the song. Tests: - Unit: song-edit 14, piano-roll 19, song 14 tests. New cases for the paste spot, pulling out left, the round snap and Fit. - e2e 64+65 on melektaus-atx: ALL PASSED - 54 checks (+4). New: Shift drag and Shift click, Ctrl+V under the pointer in both tabs, Fit zooming the rows, pulling a pattern out left and snapping a sound to the end of its second round. e2e 64 zooms the rows out again after Fit, so the keys it plays later are on screen. - Gate on melektaus-atx: 251 files, 3912 tests, CHECK EXIT 0. - Then the pan down the rows: e2e 64 on melektaus-atx ALL PASSED - 30 checks. Its pan check now also pans the top row down, half the grid's height, and a click above it draws nothing. Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> |
||
|
adminandClaude Opus 5.5
|
a3101c590c |
Size notes by either end and pan before bar one in music tabs
A round of small fixes to the Pattern and Song tabs: what the ruler and a pan do in both, and a few things the tabs carried that were in the way. - A middle-drag can take bar 1 up to half the grid or lanes in. The time before it is drawn dark on the ruler, the grid and the lanes. Nothing lands there: a click draws no note, a drop shows no frame. - A press or drag on the ruler puts the start on the nearest grid line, no longer on the one before the pointer. - A new song has one track instead of four. The "+ Track" row under the heads is gone, a head's menu adds tracks above or below. A song still keeps at least one, so that menu is always there. - A note can be sized by its left end too: the start goes to the nearest grid line and the end stays put, never before tick 0. - An end of a note under the pointer lights up and shows a resize cursor, as on an item of the Song tab. Tests: - Unit: piano-roll, song-edit, song, song-play 52 tests. Two new cases for the left end and the pan, the song fixtures add their tracks themselves now. - e2e 64+65 on melektaus-atx: ALL PASSED - 50 checks (+2). e2e 65 adds its tracks through the head's menu and clicks the ruler three quarters into a bar, which only the nearest line passes. - Gate on melektaus-atx: 251 files, 3909 tests, CHECK EXIT 0. - A probe shot of the piano roll panned in: the time before bar 1 dark, the left end of a note lit. Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> |
||
|
adminandClaude Opus 5.5
|
aa097bd076 |
Zoom with the wheel and set the loop on its own strip in music tabs
The ruler of the Pattern and Song tabs did two things with one drag,
and the wheel did three things with Alt and Shift. Both now do one
thing each, and the Song tab gets a few edits it was missing.
- The ruler has a loop strip along its top. A drag there sets the
loop, a press or drag below it moves only where playing starts.
- The wheel only zooms: the time over the grid, lanes and ruler, the
rows over the keys, the tracks over their heads. Alt and Shift no
longer change it. A middle-drag still pans.
- Tracks can be zoomed from 28 to 160 px. Below 46 px a head shows
only its name, M and S. An old saved view gets the old height.
- A click on nothing in the lanes picks the song itself.
- A right-click on an item opens a menu with Delete instead of
deleting it. The inspector has no delete buttons any more.
- A sound item goes up to +12 dB, a track up to +12 dB. A pattern
item stays at 0 dB, since a note is held to unity.
- An end of an item under the pointer lights up and shows a resize
cursor. A long item marks every point where it starts over.
- The Pattern tab has an Audition switch in its header, off at first.
Only with it on does a note sound when drawn, grabbed or moved.
The keys down the left sound either way.
- A looped sound item draws every round alike. Each round is drawn
from its own start, and each column shows the loudest part of the
sound it covers instead of one sampled bucket.
- A song is at least one bar long instead of four. An empty song
fits that bar across, and Play song ends after the last item.
- The ghost notes held back in #334 got their own issue, #339.
Finding: suite 542 for
|
||
|
adminandClaude Opus 5.5
|
8f9c250eb6 |
Lay patterns and sounds out on tracks and play them as a song #334
Patterns could only be heard one at a time, in their own tab or from a behavior. A song lays patterns and sounds out on tracks along one time axis and plays them through the scheduler of #332, the third piece of the music tools of #330. - New asset type song under the heading Songs, with four empty tracks, 120 BPM in 4/4 and a grid of a bar. Tempo, meter and grid are rows in the inspector. Tracks, items and the loop are the asset's data, held to their rules on load and in every command. - A track has a name, volume, pan, mute and solo. Each is heard on a bus of its own, so a change reaches what is sounding at once. - A pattern item repeats its pattern for as long as it is, with a transpose and another instrument if wanted. A sound item plays its sound as a clip at its own speed, round and round, through a sound FX if wanted. Both have a volume on top of their track's. - Cut back at the left end or split, an item starts as far into what it plays as the cut is: ticks into a pattern, seconds into a sound. - The tab shows the heads with M, S, volume and pan, the ruler of the Pattern tab and the items, a pattern with its notes, a sound with its waveform, a missing asset red. Patterns and sounds are dragged in from the Assets panel. Body, right and left end move, lengthen and cut back, Alt leaves the grid. Ctrl+C/V/D/A, Ctrl+E splits where playing starts, Delete, arrows. A double-click opens a pattern item in its tab. - What is picked is a new selection of its own, so the inspector shows the item or the track, with a button to delete it. - The scheduler plans clips beside notes. Where the playhead starts or jumps back inside a clip, it is taken up that far into its sound. A clip fades out at the end of its item or of the loop. - The editor plays one piece at a time: a pattern started stops the song and the other way round. - The rules are pure functions in core/music/song, editor/song/ songView and songEdit. Findings: - The suites of |
||
|
adminandClaude Opus 5.5
|
4ea752feef |
Draw notes for an instrument in a piano roll and loop them #333
Notes could only be played one at a time, by a key or a behavior. A pattern is a stretch of notes for one instrument, drawn in a piano roll and played in time through the scheduler of #332. Songs (#334) will lay patterns out on tracks. - New asset type pattern under the heading Patterns. Instruments are listed under Instruments now, since a heading is one per type. - Notes are a start and a length in ticks, a note number and a velocity, kept to their rules on load and in every command. The instrument, the length in bars, the grid, the meter and the tempo are rows in the inspector. The loop is the asset's own data, the whole pattern while none is set. - Grids from 1/1 to 1/32 and the triplets 1/4T to 1/32T, all whole ticks. The meter only moves the bar lines, the notes stay put. - The tab shows the keys down the left, a ruler with bars, beats, loop and start along the top, the notes between them and a velocity lane below. Keys the instrument plays nothing for are grey, the names of a drum kit stand on its keys. - A click draws a note on the grid line before the pointer, as long as the last one drawn or lengthened and as hard as the last velocity set. The body moves a note, the right end lengthens it, Alt leaves the grid. A drag on empty grid picks with a band, Shift adds, a right-click deletes. - Keys: Space plays, Delete, Ctrl+C/V/D/A, the arrows by a semitone or a grid step and with Shift by an octave or a bar. A paste lands where playing starts. Every gesture is one undo step. - A click on the ruler sets where playing starts, a drag the loop or one of its ends, its menu loops a bar or the whole pattern. - The wheel scrolls, Shift across, on the ruler or with Alt it zooms. Ctrl+wheel stays with the browser, Pixi listens passively. - Play runs the loop through the scheduler. An edit goes to it on the next window without a restart, a new loop or tempo counts from what is planned. Another pattern shown or a project opened stops it. - The time axis and the ruler are their own pieces in editor/music for the song tab. The rules of the roll are pure functions in rollView and rollEdit. Findings: - Music.play could start after a stop that came while it was still loading its files. A run counter makes the late start give up. Music.edit now loads what a new note needs as well. - A click on an end of the loop would have set the loop again. A press there only moves the end once it is dragged. Tests: - pattern.test.ts (new, 9) and piano-roll.test.ts (new, 16): model, grids, meter, held notes, sequence, commands, loop, round trip, drum names, time lines, rows, hits, bands, lane, edit rules. - e2e 64 (new) on melektaus-atx: ALL PASSED, 20 checks. e2e 4 with 29 asset types: ALL PASSED, 62 checks. - Gate on melektaus-atx: CHECK EXIT 0, 247 test files, 3839 tests. - Counter-checks: the move without its clamp, the sequence without the end of the pattern, the duplicate offset without whole grid steps each fail 1 test. Without passing edits to the scheduler the e2e check for a note drawn while playing fails, the rest passes. - Probe on stein2: the tab with a drum kit, before and while playing, looked at in two screenshots. Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> |
||
|
adminandClaude Opus 5.5
|
3f12a77aea |
Preview a sprite at the end of its inspector, placed or as an asset
A sprite's inspector listed its rows but never showed what they add up to. The picture, its frame, nine-slice, tint and shader could only be judged in the scene, often far from the object being edited. - SpritePreview draws the sprite through syncSpriteMesh, the function the scene draws it with. Slices, padding, tint and shader come out the same without a second path. syncSpriteMesh now takes only the three fields of a DrawItem it reads. - The subject is resolved by previewPicture from the Shader tab, so a placed sprite shows its own overrides. - previewFit is the rule for size and place: whole device pixels per unit from 1 on, at most 8, and the corner on a whole device pixel. Pixel art stays sharp. A sprite larger than the group shrinks freely. - A shader with a Time node keeps the preview redrawing once a frame while it is on screen. A folded group or a hidden panel stops it. - New test hook __gm.inspectorSpritePreview(). Finding: the preview redrew on a model change in a microtask at first. A drawn picture whose revision moved on is retried once, in a microtask queued by the scene's synchronous redraw. That retry ran before the preview had let go, and the old pixel art sheet stayed waiting (e2e 48l-iii read waiting [1,1,1]). The preview now redraws at once on a model change, as the scene does. Tests: - unit: 238 files, 3592 tests (+5 in preview-fit.test.ts), and the group list of a placed sprite in sections.test.ts ends in PREVIEW - e2e 48: ALL PASSED, 47 checks (+2: 48l-i asset preview with the frame, 48l-iii placed preview with its shader values) - counter-checks: without whole-pixel zoom 2 unit tests fail; with the microtask redraw 48l-iii fails with waiting [1,1,1] Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> |
||
|
adminandClaude Opus 5.5
|
2c19c89878 |
Let variables, fields, ports and list items be dragged into order (#310)
Variables of a behavior, the fields of a struct, the ports of a start or end node and the items of a list could only be added and removed. Changing their order meant removing and adding them again. Now each of them is dragged by the mark in front of its row. - sortBlocks (ui/blockDrag.ts) makes the rows of one column sortable. A block is every row it covers, so a struct moves with its fields and a list item with its nested list. The block is dimmed while it is carried, an accent line shows where it lands, and a scrolled panel follows the pointer at its edge. Less than 4 px stays a click. - The arithmetic is pure and lives in ui/sortable.ts: blockGap, gapLineY, dropSlot and edgeScroll. dropIndex of the tile strip moved there too, so the reorder maths sits in one file. - MoveVariableCommand, MoveStructFieldCommand and MovePortCommand build on the existing MoveCommand. Undo moves back. - Lists need no command. InlineList replaces the list as a whole, as it does for every other edit of its items. - The grip is the kind mark, for a list item its number. Moving only happens among siblings: a field stays in its struct. - On a Struct asset the move runs through WithStructTypes. Typed variables, Pack/Expand ports and split outputs follow the new order. - Values and edges hang on names, so only the order changes. Nodes running a behavior read their ports from the start node, the new order reaches them without a copy. - Not sortable by design: the variables of a placed object, the fields of a typed struct (moved on the Struct asset) and the picked ports of Variables/Properties nodes. - Test hook __gm.inspectorMark(label) finds the mark of a row. Tests: - Gate on melektaus-atx: 235 files, 3572 tests, CHECK EXIT 0 (+9). - tests/core/reorder.test.ts: a variable, a field two levels deep, a Struct asset reaching a typed variable and Pack, and start ports reaching the calling node with edges and result kept. - e2e 22: ALL PASSED, 39 checks (+4, sum 1739). 22f-iii drags a variable past a struct of several rows, then a field inside it. - Counter-probes: dropSlot by top edge instead of middle and a field move that ignores its path fail 3 unit tests. With sortBlocks switched off, the three order checks of 22f-iii fail. Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> |
||
|
adminandClaude Opus 5.5
|
cf6043a066 |
Show a wheel step or Fit as a short zoom transition (#309)
The wheel and the Fit button used to jump to the new view. Now the view takes a short way there, 200 ms by default, everywhere the editor zooms. The zoom steps stay the same, only the change is shown. - viewTween: tweenView is the way between two views as a pure function. The scale moves by equal ratios, and the world point that sits at the same place on screen in both views stays there. After a wheel step that is the point under the pointer. - ViewTween drives it on the ticker. A surface hands it reading, writing and drawing its own view and wraps its wheel and Fit code in change(). A step during a transition starts from where that one was heading, so quick steps add up to exactly as many steps. - Anything else that moves the view ends the transition. A pan jumps to the target first, and saving a view saves the target. - Wired into FreeViewport (Scene, Container, animation preview), SheetCanvas (Texture, Curve, Pixel art, Vector art), GraphCanvas, panAndZoom (Tile board, plugin node board) and the timeline. - Menu > General settings... sets the time in ms, 0 jumps at once. It is kept in this browser like the panel sizes, not in the project, and it is not an undo step. - A document that opens still comes up framed at once. The animation preview frames a new subject itself instead of calling fit(). - The pixel art readout names the step the view is heading for. Measured in the scene view at 200 ms on melektaus-atx, where every frame of the transition is a full redraw: - 500 sprites: redraw 6.7 ms, 16 frames, mean 18 ms - 1000 sprites: redraw 13.0 ms, 9 frames, mean 27 ms - 2000 sprites: redraw 32.2 ms, 5 frames, mean 58 ms Tests: - The harness sets 0 ms on every load, so the existing modules read the step and not the way. - e2e 46i samples one wheel step at 1000 ms a frame later: zoom 1.033 between 1 and 2, the point under the pointer kept at (134, -40). It lands on the view a 0 ms jump reaches. - e2e 46 and 49 expect the new menu entry. - Gate (atx): 234 files, 3563 tests, CHECK EXIT 0 (+15) - e2e 46,49 (atx): ALL PASSED, 43 checks (+3, sum 1735) - Three counter-checks fail view-tween.test.ts as expected. e2e 46i fails when the scene view does not carry its centre along. Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> |
||
|
adminandClaude Opus 5.5
|
70f3608733 |
Let Mouse position and Is hovered see through any camera (#304)
An overlay camera from #302 can stand elsewhere and zoom differently.
A HUD button only it shows lay somewhere else in the world than the
mouse of the main camera, so Is hovered never found it. Both nodes now
take a camera and see the mouse through that camera's picture.
- New input `camera` on Mouse position and Is hovered. Left open, both
read the main camera exactly as before.
- `pointerThrough` in core/properties/camera is the rule as a pure
function. It fits the camera's picture into the main one and centres
it, the same way overlayView draws it.
- The game view reports where the mouse lies on the main picture, as a
part of its width and height. The world turns that into a camera's
view, so a main camera on the move does not drag the mouse across
the HUD while the mouse stands still.
- `in view` is true only on the camera's own picture. A camera that is
not drawn (switched off, a second plain one, not a camera) never has
the mouse on it.
- On click and Mouse button stay with the main camera, as agreed in
the issue.
Also fixes a unit test that
|
||
|
adminandClaude Opus 5.5
|
2aa635f453 |
Keep an output's name readable beside a long inline value (#306)
An input and an output in the same port row were cut to fit each on its own. The input text could reach x = 123 and the output label could start at x = 83, so a long inline value ran under the output's name. At Animation playing a long animation name covered "progress". - The output label is placed first and keeps its room. The input text is cut with an ellipsis 6 px before it, as decided in the issue. - The rule is a pure function in src/editor/graph/portRow.ts. A row without an output keeps the input's old limit of 108 px. - The value a run shows beside an output uses the same rule. Its left edge can no longer lie right of its right edge. - New test hook __gm.graph.rowSpans(nodeId) gives each row's input and output text as cut and placed, in node units. - NODE_WIDTH stays as it is, as decided in the issue. Tests: - Gate: 230 files, 3520 tests (6 new in port-row.test.ts). - e2e 6: all passed, 149 checks (148 + 1). - Counter-check: with the rule switched off, the input text reaches x = 121.4 under "progress" at x = 114.1, and the new check fails. Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> |
||
|
adminandClaude Opus 5.5
|
808e1eefc2 |
Clean up duplicates and dead code, and fix the + menu check (#85)
Refactoring round 9 covers everything since round 8 ( |
||
|
adminandClaude Opus 5.5
|
2e55071fa5 |
Lay a shader over a camera's whole picture (#299)
A shader so far worked only on its own wearer. Effects over the whole game picture, such as a vignette, grey, scanlines or a red flash on a hit, had no place to live. A camera now wears one, drawn the way a field shader of a particle source is (#170). - The camera gets a Shader row and, while one is picked, a Shader resolution row. The shader's properties follow as camera rows. They load, animate and appear in a Properties node under Type Camera. - Every view keeps masks and objects in one container. CameraShade renders it into the camera's picture, cleared to the background, and draws the shader over the frame. Game tab and play.html take the container off the stage while the picture stands in for it. - Screen pixels gives the picture as many pixels as it covers on screen. Camera pixels uses View width x View height and scales up without smoothing. - A pixel counts as a camera pixel in both (the user's choice). The uniform uPixelScale makes Texture size read View width x View height, so a Blur keeps its reach at any game scale. - Each camera wears its own shader, overlay cameras included. A red flash on the game camera leaves the HUD of an overlay camera alone. - The scene view's eye has a Shader switch on the Camera row, off by default. With it on, the main camera's shader lies over its frame, below symbols and gizmos, and the world around it stays drawn. - New tool tools/perf-camera-shader.mjs measures the cost. Measured on stein2 (HD 630, Game tab at Fit 1310x679): a camera shader that hands the picture through stays inside the scene's own spread of 3 to 5 fps between runs. A Blur of 4 cost 4 to 8 fps. Tests: - Gate on melektaus-atx: 227 files, 3497 tests (3487 + 10). - e2e 63 alone: 11 checks (6 + 5), e2e sum 1725 counted. - 63e-63i: pass-through is byte-equal and upright at 100%, flat red reaches the corners while the overlay keeps its green, Texture size reads 640 x 360 in both resolutions at Fit, no shader draws as before, and the scene view shows it only with the switch on. - Counter-checks: a camera left out of the shader wearers fails 1 unit test. Counting screen pixels fails 63g with #ab6000. Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> |
||
|
adminandClaude Opus 5.5
|
b2326085ed |
Show each camera only its layers and lay overlay cameras on top (#302)
A camera could only show the whole scene, so a HUD drawn in the world would run through a camera shader (#299) with everything else. Render layers say which cameras see an object, and overlay cameras draw their own picture over the main one. - The project has a list of up to 16 render layers, edited in Project settings next to the collision layers. It is a list of its own, read by the same rules (`layerNamesOf`). - Sprites, texts, tilemaps, particle sources and containers carry a row `Render layer` under their switches. Its default `Inherit` takes the parent's layer, at the top the first one. - A camera has `Sees` (all layers by default) and `Overlay`. The main camera is the first one switched on without Overlay, so two plain cameras still draw through the first one only. - Every view through a camera keeps only what that camera sees and lays one see-through view per overlay camera over itself. That view is a `WorldViewport` of its own, handed its view and frame from below. - An overlay is fitted into the main camera's whole picture without distortion. One of the same size and zoom covers it exactly. - `z` sorts within one camera only. The pictures lie on top of each other as a whole, which is what a shader per camera (#299) needs. - The Game tab's preview now collects the scene once per redraw. Before it collected it twice, with the cameras it would have been five times. - `SetCollisionLayersCommand` became `SetLayerNamesCommand`, which takes the list it sets. Follow-ups: #304 (the mouse through a chosen camera) and #305 (change the render layer at run time). Tests: - Gate: 226 files, 3487 tests (3480 + 7) - e2e 63 (new): 4 checks. A green overlay sprite at z -10 covers a red main sprite at z 1000, in the preview and in the running game. A `UI` sprite in front of the main camera and a `Default` one in front of the overlay stay away. Without Overlay the second camera draws nothing. The settings dialog adds a render layer at the end. - Counter-checks: inheriting from parents switched off fails 1 unit test. Overlays never drawn fails the two overlay checks in e2e 63. - e2e total 1720 (1716 + 4), computed. Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> |
||
|
adminandClaude Opus 5.5
|
ca5b2db449 |
Keep where each divider was dragged to across a reload
A panel dragged wider was back at its first size after every reload. The sizes are now kept in the browser, next to the folded groups. - editor/panelSizes.ts holds one entry in localStorage, game-maker.panel-sizes: a name per divider and its width, height or share. - A panel reads its size once when it is built, held to the bounds its divider keeps today. Every drag writes the new size. - Kept are the columns left and right of the centre, the console, the split of the left column, the tilemap panel, the preview of the Shader, Particles and Pixel art tabs, each under its own name, and the split of the user management. - The sizes belong to the browser, not to the project. They hold for every project opened there. - A browser that refuses the storage, or holds rubbish under the entry, starts with the sizes the editor comes with. Tests: - Gate on melektaus-atx: 219 files, 3400 tests, CHECK EXIT 0. - Seven new unit tests in tests/editor/panel-sizes.test.ts. All five counter-probes bite. - Smokes on melektaus-atx: 24, 19 and 21, all pass. - One new e2e check in module 48: the left column dragged 40 px wider is as wide after a reload, and dragged back after. - Full suite on melektaus-atx: 1692 checks, all pass. It ran before the fix to the animation players of the commit before last. - Browser counter-probe: without the write to the browser exactly that check fails. - Only the left column is measured across a reload. The other dividers go the same way and have no check of their own. Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> |
||
|
adminandClaude Opus 5.5
|
7dd3ae1131 |
Tie two objects with a hinge, a spring, a rope or for good (#154)
Two bodies could not be connected: no door on a hinge, no lamp on
a rope, no wheel on an axle. This is the first step of the issue,
the four joints without a motor. The slider and the motors follow
in a second step under the same issue.
- Joint is a new asset type, placed as a child of the object it
holds, like a collider or a rigidbody. "Add joint…" in the
object menu makes one or places one the project has. An object
takes as many as it needs.
- Where the joint sits is the point it holds its object at. A
hinge and a fixed joint have that one point only. A spring and a
rope end at a connected anchor on the other object, counted in
that object's own units, or in the scene's without one.
- The rows follow the type: length, stiffness and damping for a
spring, length for a rope, an angle limit for a hinge. Length 0
takes the distance the two ends were placed at. The limit counts
from how the two were placed.
- The connected object is an object reference in the schema of the
type. Pasting, containers and removing treat it as they treat
every reference since #258.
- shownFor is a new schema option: a row is shown while an enum of
the same bag holds one of the named values.
- The object needs a rigidbody, its own or one further up. Without
one the joint holds nothing and the console says so once.
- A connected object without a rigidbody is a moving anchor: the
joint has a kinematic body of its own that follows it.
- A connected object destroyed while playing makes the joint let go
with a hint. Removed in the editor the reference empties, so the
joint holds on to the scene. The issue asked for "inactive" there.
- "Add joint" ties two objects while the game runs, from a joint
asset as the template. Destroy on the joint lets go, there is no
Break joint node. Destroy with keep children takes the joints
along with the object.
- The scene view draws a line from each joint to what it holds on
to and rings the held point. A selected spring or rope has a
round handle on its far end, and dragging it is one undo step.
- Joints hold in Play only. The editor run simulates nothing
(#148), and the inspector of a placed joint says so.
- Rapier counts a revolute joint's limits absolutely, not from the
start, so the placed angle is added. Measured with a probe.
- The + menu has 25 types now and no longer fits under its button
on a canvas 800 high. It scrolls there, and e2e 04 scrolls to
the last entry instead of expecting it in view.
Tests:
- Gate on melektaus-atx for this state: 218 files, 3390 tests
(3336 + 54), exit 0.
- e2e 1-16,24,39-46,51,52,57,58 on melektaus-atx: 831 checks, all
pass. Module 41 alone: 25 checks (21 + 4).
- 54 new unit tests: 40 in joints.test.ts (rope, spring, pendulum,
limit, fixed, the other end, the node, containers, paste), 6 for
the line the scene view draws, 4 catalog cases of the node. The
remaining 4 come from tests that make a case per asset type.
- Four new e2e checks in module 41: Add joint from the menu, the
rope to the hook with its line and handle, dragging the handle
with one undo, the bob hanging in Play next to one that falls.
- e2e 04, 40 and 46 count the new type in their lists.
- 21 of 22 unit counter-probes fail their tests. The other one is
equivalent: Rapier ignores removing a joint that left with its
body, the guard stays.
- Three browser counter-probes fail their checks (2, 1 and 2).
- One screenshot looked at: icon, line, handle and the rope rows.
- The e2e sum of 1691 is counted (1687 + 4, 1687 measured by CI
on
|
||
|
adminandClaude Opus 5.5
|
b45bbcc976 |
Hold in tests that a graph edit reaches a running behavior (#216)
The issue said a behavior that runs in the editor keeps the graph it started with, until it is switched off and on. Measured before building anything, that is no longer so. An edit runs from the next frame on. Since when, was not found out. - No code changes. A command raises the project event, EditorRun refreshes, and syncFromModel of the behavior system empties the graph cache. - Decided in the issue: the instance carries on and is not started over. Its variables and timers stand, and On start does not fire again. A restart would write what On start writes or spawns into the saved scene with every edit. - Starting over stays what it was: Run in editor off and on, or Play. - Module 43 of the e2e no longer switches the behavior off and on before it measures the changed layers of a ray cast. Tests: - Gate on melektaus-atx for this change alone: 212 files, 3264 tests (3260 + 4), exit 0. The gate right before this commit ran on the tree of this and the next commit together: 213 files, 3278 tests, exit 0. - e2e 18,20,43 on melektaus-atx: 57 checks, all pass. The check in 43 is the old one, it now holds without the workaround. - Four unit tests in editor-run.test.ts: a changed node setting, a node wired in and one cut off, a flow hung on On start that does not fire until the switch goes off and on, and an undo. - One counter-probe: without the emptied cache the wiring test fails. The setting test does not, settings change in place. - No full run and no smokes. The sum of e2e checks stays 1676. Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> |
||
|
adminandClaude Opus 5.5
|
c88f57cf0a |
Let a project choose how its game link is zoomed (#279)
The page of a released game always drew the camera at Auto, the
largest whole step that fits. A camera of 300x180 in a window of
1280x800 stands at step 4 and leaves a border left and right. The
issue asks for Fit next to it. Answered there: a setting of its own
rather than the scale of the Game tab, and no switch for the player.
- The project has a field gameLinkZoom, 'auto' or 'fit'. A document
without it reads as 'auto', so nothing changes for a project that
is there already. No format bump.
- Project settings has a row "Link zoom" with a menu of Auto and
Fit. It is an undo step of its own, SetGameLinkZoomCommand.
- GameScreen hands the field to cameraView where it passed a fixed
'auto'.
- gameScale, the scale of the Game tab, is not touched and does not
reach the link.
- The released copy is frozen, so the change reaches the link only
with "Update release".
Decided here:
- The row is called "Link zoom", not "Game link zoom" as proposed.
The longer label is wider than the label column of the dialog and
pushed its button 12 px out of line with the others.
- The undo step keeps the name "Game link zoom", which is what the
tooltip of the undo button shows.
- A note under the row says "The released game at the largest whole
step that fits, or filling the window."
Tests:
- Gate on melektaus-atx: 211 files, 3227 tests (3219 + 8), exit 0
- e2e 60 on melektaus-atx: 19 checks, all pass
- e2e 35,46,59,60: 74 checks, all pass
- No full run and no smokes. The sum of 1671 (1668 + 3) is reckoned,
1668 is what CI counted for
|
||
|
adminandClaude Opus 5.5
|
9e869df063 |
Free a redrawn picture only once no shader names it (#293)
Editing a vector drawing made Pixi warn "destroyed while still bound
to a shader", twice with every change, once it had begun. It began
where an object wears the drawing through a shader asset. Each
change draws the picture anew and destroyed the one before it, but
the mesh of that object keeps its picture bound until it syncs. The
issue also asks for the button "Add shape" to go: a shape without
points cannot be given any, the Pen draws a new one.
- GeneratedPictures takes two more callbacks. inUse says that a
picture cannot be freed yet, soon runs a retry once whoever asked
is done.
- A replaced picture that is still in use waits in a list of its
own. It is freed right after the redraw that asked, as a rule. On
a later ask where its wearer was not part of that redraw.
- TextureLibrary tells a bound picture by the listeners for change
on its source. Under WebGL the bind groups are the only ones that
listen there. The retry is a microtask.
- The rule is asked for every drawn picture alike, whoever wears it.
- The inspector of a drawing and of a shape has no "Add shape" any
more. "Delete shapes" for several selected shapes stays.
Decided here:
- Under the list of shapes a second note says "The Pen draws a new
shape." while only the asset is selected.
Found on the way:
- Reproduced on a throwaway copy of the project the report came
from: 6 warnings for 3 changes with the shader override on the
object, none without it. After the change none, and no replaced
picture is left waiting.
- The fixture project of the tests never showed the warning. No
object there wore a drawing through a shader.
Tests:
- Gate on melektaus-atx: 211 files, 3219 tests (3209 + 10), exit 0
- e2e 47,48 on melektaus-atx: 113 checks, all pass
- e2e 28,30,31,39,40,47,48: 350 checks, all pass, run before the
wording of the new note changed
- The first gate was red: an existing test read the wording of the
note that had changed. Only three test files had been run after
the change.
- No full run and no smokes. The sum of 1668 (1667 + 1) is reckoned,
1667 is what CI counted for
|
||
|
adminandClaude Opus 5.5
|
345289982b |
Scale, turn and mirror the shapes of a vector drawing (#291)
A shape could only be moved and reshaped point by point. Whoever
wanted it larger or turned pulled every point alone, and for several
shapes or a group there was no way at all. The answers in the issue
settle the rest: the change is baked into the points, nothing of it
is remembered, and the line width stays.
- With Select the selection stands in a frame of eight squares and a
knob, drawn like the one of the scene view. It holds one shape,
several shapes or a group, the same selection that is dragged as
one.
- A corner square scales from the opposite corner, a square on an
edge in its own direction. Shift keeps the proportions, Alt scales
about the middle.
- The knob turns round the middle of the frame, with Shift in steps
of 15 degrees. After the pull the frame stands upright again.
- The inspector has a band TRANSFORM with X, Y, Width, Height and
Rotate by, and the buttons Flip horizontal and Flip vertical.
- Points, handles, gradients and texture tiles are taken through the
same matrix. The rule is a pure function in vectorTransform.ts,
transformShapesCommand makes one undo step of any number of
shapes.
- A press goes to a point or a handle first, then to the frame, then
to a line. shapeFrame.ts holds where the handles are and what a
pull of each means.
Decided here:
- The frame stands 15 pixels off the shapes. The points of a shape
lie on its bounds, so a square on the bounds would cover them.
- The knob only turns. In the scene view it scales as well.
- A side cannot be pulled through the opposite one, the frame keeps
at least 1 pixel.
- Coordinates are rounded to a thousandth of a pixel, so a quarter
turn is exact.
- A texture tile stays upright under a turn and grows to the bounds
of the turned tile. The bands of a gradient stay square to its
axis under an uneven scale.
- The switch Scale stroke of the proposal is not built.
Found on the way:
- The inspector of a shape is now taller than the window. Two checks
of module 47 no longer found their row or button on the screen and
use the new hook inspectorButton, which scrolls there first.
- Not solved: with a shape at the top edge of the view the knob lies
outside the tab. The wiki names it under the limits.
Taken over from #217: the e2e check for two selected shapes without
a group, and unit tests for the snap of the common offset and for
the gradients of the shapes dragged along.
Tests:
- Gate on melektaus-atx: 209 files, 3176 tests (3121 + 55), exit 0
- e2e 47,48 on melektaus-atx: 112 checks, all pass
- No full run and no smokes. The sum of 1664 (1660 + 4) is reckoned,
1660 is what CI counted for
|
||
|
adminandClaude Opus 5.5
|
6d79cf59a3 |
Move a large graph instead of drawing it again (#292)
In a graph of many nodes the frame rate dropped while panning, and more so while one node was dragged. Every pointer move rebuilt every box, every text and every curve, and a drag also announced a changed project, so the panels rebuilt along with it. - Panning and zooming move the picture. GraphCanvas.applyView sets position and scale and draws anew only the grid and the rubber band. It used to call redraw(). - A node draws its box and makes its texts only when what they show has changed. NodeView keeps a signature of what redraw reads and one of what rebuildTexts reads, and returns early while they hold. - A drag does not announce a changed project. GraphDrags writes the model on every pointer move and asks the canvas once a frame to follow (GraphCanvasHost.moved). state.preview() waits for the command of the release. - Nodes outside the picture are not drawn. inView in graphView.ts is the rule, cull() applies it after every redraw and every change of the view. - The graph is a render group, and box and pins go into the batch. The mask sits on a container above the group, on the group itself it would be panned and zoomed along. - The rubber band and the drop mark of a dragged behavior are drawn on their own (drawBand), without a redraw of the graph. Measured in the CI image with 388 nodes and 540 links, fitted to the canvas, 240 pointer moves 16 ms apart: - Pan, script per move: 25.2 ms before, 2.0 ms after - Pan: 4.4 frames per second before, 18.7 after - Drag a node: 2.7 frames per second before, 22.4 after - The still picture: 9 frames per second before, 21 after Not solved: the still picture of such a graph stays at 21 frames per second in the test browser. What is left is the drawing itself, and the frame rates are those of that browser, not of a desktop GPU. Tests: - Gate on melektaus-atx: 207 files, 3121 tests (3114 + 7), exit 0 - e2e 4,6,18,19,20,23,24,26,28,31,36,43,51,53 on melektaus-atx: 542 pass, 1 fail. The fail is module 51 after module 43, an order the suite does not have, and it fails the same way without this change. Module 51 alone: 12 checks, all pass. - No full run and no smokes. The sum of 1660 (1656 + 4) is reckoned, and the CI workflow is switched off. - Seven unit tests: six for inView in tests/editor/graph-view.test.ts and one in frame-preview.test.ts - Four e2e checks in block 6z-xii of module 06: pan, drag, zoom in and fit, a changed value - Seven browser counter-probes fail 2 to 3 checks each Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> |
||
|
adminandClaude Opus 5.5
|
32a0af6e2c |
Put the text and boxes of the interface on device pixels
On a screen scaled to 125 % or 150 % the editor looked soft beside a page the browser draws itself. The layout counts in whole CSS pixels, and most of those fall between two device pixels there. The GPU averages both: text loses its edges, and a 1 px line becomes a pixel and a half of mixed colour. Now text and boxes are rounded to device pixels, and a line is one device pixel wide. - ui/pixelGrid.ts holds the rule. crispText() makes a text with Pixi's roundPixels, crisp() does the same for a Graphics of upright boxes, and hairline() is the width of one device pixel. - Every text of the interface is made with crispText() instead of new Text(). - crisp() only rounds where the scale is not a whole number. At 100 % and 200 % nothing changes. - drawControlBox, drawHeaderBar and drawSectionBand draw their lines a hairline wide and flush with the edge. The widgets that draw lines of their own do the same. - Two bands share exactly the line they draw, and a column still ends on a whole pixel. - The stage is nudged by 1/32 px where the scale is not whole. At 150 % every odd pixel is an exact half, and without the nudge one band came out a row shorter than its neighbours. - Curves, icons and everything of the game stay unrounded. Rounding their points would bend them. - The harness takes deviceScaleFactor as an option, and the hooks deviceColumn, edgeContrast and pixelGrid read the frame as the screen gets it. Not in here: the subpixel smoothing a browser gives its own text. Pixi draws a text into a transparent picture first, and there only greyscale smoothing is possible. Measured at 150 %, edge contrast before and after: top bar 31.5 to 47.8, the lists on the left 68.6 to 86.4, inspector 27.6 to 38.4. At 100 % it is 46.5, 90.1 and 37.9, and the picture there is the same as before pixel for pixel, apart from the fps display. Tests: - Gate on melektaus-atx: 206 files, 3114 tests (3104 + 10), exit 0 - Full run on melektaus-atx: 1655 of 1656 checks passed, smokes 24/19/21. The one that failed was a condition of the new step 62 itself: it scrolled an inspector that had nothing to scroll. The step now makes the window lower for that reading. - e2e 61,62 after that fix: 14 checks. The full run was not repeated, and CI is switched off for now. - Ten unit tests, nine in tests/ui/pixel-grid.test.ts - Eight e2e checks in the new step 62, which runs at 150 % - Eleven unit counter-probes fail tests - Four browser counter-probes fail their checks. They ran before the fix to step 62 and were not repeated for it. - Screenshots looked at for 125 % and 150 % Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> |
||
|
adminandClaude Opus 5.5
|
2ff3a78607 |
Put the shapes of a vector drawing on layers and in groups (#190)
A vector drawing was one flat list of shapes. With many shapes the list got hard to read, and several shapes could not be kept or moved together. Now the shapes stand on layers, as in pixel art, and can be put into groups that nest. - A drawing has layers, each with a name and an eye. A hidden layer is neither in the tab nor in the picture a sprite wears, and its shapes cannot be pressed. One layer is the one worked on: the pen and Add shape draw onto it, and SHAPES lists what is on it. - The inspector has a list LAYERS over the shapes. Its plus adds a layer, the cross on a row removes it with all on it, the last one stays. A double-click renames, a drag sorts. - Group (Ctrl+G) puts the selected shapes into a group, Ungroup (Ctrl+Shift+G) takes it away. A group stands over its rows in the list, the rows one step in, and a row is dragged into a group or out of it. - In the tab a press on a shape takes its outermost group, and a drag moves the group as one undo step. - The model has layers with a tree of shapes and groups instead of a flat shapes array. The rules are pure functions in core/model/vectorTree.ts. A drawing saved before opens with all its shapes on one layer. - SortableList takes rows with a depth and drops into a tree. The flat lists of tilemap and pixel art run as before. Decided here: - A group has no transformation of its own and cannot be hidden or locked. Rotating and scaling is the follow-up #291. - A group is never empty: the one that loses its last shape goes with it. - Several selected shapes are dragged together, grouped or not, and a click on a shape of the selection keeps the selection. This is what #217 asked for. - Shift+click selects like Ctrl+click. With Select, Shift pans only beside the shapes, as in the scene view. The middle button pans anywhere, and with the pen and Paint Shift pans as before. - A row of the list picks one shape of a group alone. - Shapes change their layer through a row Layer in the inspector, which is there from two layers on. Rows are not dragged between layers. - A group cannot span two layers, the button is off then. - The pen does not draw onto a hidden layer, the hint says so. - Groups are always shown unfolded. - The four order buttons work inside the own group or layer. Tests: - Gate: 204 files, 3067 tests (3008 + 59), exit 0 - e2e 47,48: 108 checks. e2e 39,40,47,48 before the Shift change: 209 checks. No full run, the sum of 1645 (1639 + 6) is reckoned and CI measures it. - 59 unit tests: 36 in tests/core/vector-tree.test.ts, 23 in tests/editor/vector-layers.test.ts - Six e2e checks with a real mouse in block 47j - 47 unit counter-probes for layers and groups and three for the Shift click all fail tests, run on stein2 - Three browser counter-probes fail their checks - Two screenshots looked at (group in the list, hidden layer) - Only unit tested: the row Layer, sorting and removing layers, copying a group, the Shift pan beside the shapes Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> |
||
|
adminandClaude Opus 5.5
|
393caadc9d |
Head the groups of the inspector with bands that fold (#290)
The groups of the inspector had a small grey label as their title, in the same grid as a property row, so with many rows one group hardly stood apart from the next. Now every group has a band as its head, from edge to edge of the panel, and a click on it folds the group. - A band runs across the padding of its column in the header colour, with the title and a mark that says whether the group is open. The titles stay as they are, as answered in the issue. - A click on a band folds its group: the rows go, the band stays and the next band moves up against it. A control in the band (Open, + Variable, + Property) does its own job and folds nothing. - A placed object has a group SWITCHES under its name, asset and parent: Enabled, Keep on scene load and the switches of a behavior. An asset has SWITCHES and PROPERTIES, and a group without rows is left out. - The same bands head the tilemap panel, the Variables tab, the side of the Pixel art tab and the shape list of vector art. A list with a title (Layers, Frames, Shapes) folds with a click on its header, clear of its plus. - ui/sections.ts holds the rules as pure functions, SectionStack is the column and SectionHeader the band. Every title of the inspector goes through addTitle or sectionHeader in inspector/host.ts. Decided here: - A fold is kept for good, in localStorage of this browser. The issue asked whether for the session or for good and the answer left it open. - A fold is remembered by title, per panel. PROPERTIES folded once is folded on every object, asset and node. A number in a title does not count. - A behavior asset has all its rows under SWITCHES. A Variables asset and a state machine get a group SCOPE. - A greyed out control in a band takes the click too. Without that the click fell through to the band and folded the group. - The Curve tab has no column of this kind and is unchanged. Found on the way: - The inspector of a sprite is taller than the 800 pixel window of the checks now. The hooks that hand out a row scroll it into view first, and module 28 scrolls before it looks for a row by its text. Tests: - Gate: 202 files, 3008 tests (2982 + 26), exit 0 - e2e: no complete run for this state. Modules 28 to 61 passed alone (749 checks). A full run was cut off in the accounts module at 1492 passes without a failure, the modules after it and the smokes are missing. The sum of 1639 (1635 + 4) is reckoned, CI measures it. - 26 unit tests in tests/editor/sections.test.ts - Four e2e checks with a real mouse, three in module 02 and one in module 48 - 25 unit counter-probes all fail tests, run on stein2 - Screenshots of the bands looked at before the last build, none after it Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> |
||
|
adminandClaude Opus 5.5
|
c5ba21533d |
Pick a link on its line and delete it from there (#289)
A link could only be removed through the menu of its port, and the line itself took no input. A transition of a state machine could only be deleted in the list of the inspector. Now the line is the handle, in a behavior's graph and between states alike. - A click on a line selects that link and draws a halo behind it. A press counts within 6 screen pixels of the line, and where two cross the one drawn last wins. - Ctrl-click or Shift-click adds a link or takes it away. The rubber band takes every line it crosses, into the same selection as the nodes and boxes it caught. - Delete or Backspace removes what is picked as one undo step. A right-click on a line offers Hide link and Delete link. - The inspector shows a picked link: the node and port at each end and the type it carries, with Hide link and Delete link below. For several it says how many. - The arrow of a transition is picked the same way, on its name too. Delete or a right-click with Delete transition removes it. - The menu of a port is unchanged, Disconnect included, as answered in the issue. - editor/graph/edgeHit.ts holds the hit test as pure functions, and editor/inspector/edgeSection.ts builds the section. The selection has a new kind edge, and node and annotation carry edgeIds. Decided here: - A hidden link has no line and is never picked this way, also while it is shown on loan. Its mark at the port stays its handle. - The menu of a line speaks about the whole selection, like the menu of a box. With nodes or boxes held alongside it reads Delete N items. - Hiding picked links lets go of them, since no line is left. - A link wins over the box it crosses, and a mark wins over a link. - A transition has no Hide entry. - With nodes or boxes in the selection the inspector keeps showing the node or box, not the link. Tests: - Gate: 201 files, 2982 tests (2967 + 15), exit 0 - e2e, full run: 1635 checks passed (1629 + 6), exit 0 - Smokes: 24 / 19 / 21, exit 0 - The full run was done for exactly this state. - 15 unit tests in tests/editor/edge-selection.test.ts - Six e2e checks with a real mouse, block 6z-xi in module 06 and 26e7 in module 26 - 12 unit counter-probes all fail tests, run on stein2 - Three browser counter-probes fail, the build went through each time: no hit on the line, no halo, a band that skips lines - Screenshots of a picked link and a picked transition looked at before the last build, none after it Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> |
||
|
adminandClaude Opus 5.5
|
0f85476b93 |
Add points by double-click and delete the picked one (#288)
Four editors edit points, and all of them put a point down on a single press on the line and took one away on a double-click. A stray click added a point, and there was no way to see which point a key would hit. All four now work the same way: the Curve tab, the Vector art tab, a polygon collider in the scene view and a frame's collision outline in the Texture tab. - A double-click on a line, edge or segment puts a point there, in the Curve tab on free space too. The point is picked and stays in place. It can be dragged with the next press, as answered in the issue. - A click on a point picks it, and it is drawn filled. A double-click on a point takes nothing away any more. - Delete or Backspace takes the picked point away. Without a picked point the key removes the shape, the object or the outline as before. - A right-click on a point picks it and opens a menu with Delete point. In the Curve and Vector art tab the four point types stand below it. Alt-click stays. - A polygon keeps three corners and a curve keeps its ends. The entry is greyed out then. - The pick ends with a click beside the points, with another object, shape or frame, and after the point is gone. - editor/pointGestures.ts holds the rule as a pure function, and editor/pointMenu.ts builds the menu for all four. Decided here: - A single click on a line no longer adds anything. In Vector art it drags the shape, on a polygon it drops the pick, and in the Texture tab it makes that outline the active one and drops the pick. - In the Texture tab a click inside the frame still appends a corner, and that corner is picked. Delete takes the last corner first. To remove the whole outline, click one of its edges before. - The point the Pen put down last is picked, so Delete takes it and not the shape. - Delete hits the picked point also when the tab has lost the keyboard focus, after a click in the shape list or after the menu. - A vector shape that loses its last point is removed whole. Before, an empty shape stayed in the list. Findings: - Fixed: the new hint line in the Texture tab was cut off at the edge. The shorter text was not looked at in a picture again. - Not fixed: in the scene view the collider's name label covers a corner that sits near the centre. That was so before. Tests: - Gate: 200 files, 2967 tests (2944 + 23), exit 0 - e2e, full run: 1629 checks passed (1625 + 4), exit 0 - Smokes: 24 / 19 / 21, exit 0 - After the full run an unused parameter and a comment were tidied. For that final state the gate and e2e 42,47,53 (105 checks) ran again, the full run did not. - 23 unit tests in tests/editor/point-gestures.test.ts, for the rule and for each of the four editors - Four e2e checks with a real mouse, two in module 42 and one each in 47 and 53. The existing checks for adding and removing a point use the new gestures. - 20 unit counter-probes all fail tests, run on stein2 - Two browser counter-probes fail, the build went through both times. Without the Delete wiring the key removes the collider. Without the right-click hook the menu is missing, and that run stops in module 42, so 47 and 53 were not reached with it. - Three screenshots looked at, the picked point is filled. None of the Vector art tab. Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> |
||
|
adminandClaude Opus 5.5
|
d6171fd386 |
Preview pixel art and curve fields once per frame too (#274)
The previous commit left two findings open: in the pixel art tab the palette colour and the opacity of a layer still told the editor about every input, and so did the place fields of the curve tab. They now follow the same rule as the inspector rows. - PixelArtSide writes colour and opacity into the model on every input and requests the preview through a FramePreview. Both commits cancel a waiting preview first. - CurveCanvas.movePicked does the same for the t and v fields of the picked point. Showing another curve cancels a waiting preview. - Also fixed: when the colour picker ended on the colour it started from, the model was put back but nobody was told, so the previewed colour stayed on screen. commitColor now says so, as the opacity already did. The gain was not measured for either tab, only the behaviour is tested. Tests: - Gate: 198 files, 2911 tests (2907 + 4), exit 0 - e2e 47,48,53: 117 checks passed - Four new unit tests in tests/editor/frame-preview.test.ts: colour, opacity, curve fields and the return to the starting colour - Seven counter-probes fail, one test each. They ran on stein2, not in the container. - No new e2e check, the sum stays at 1616. Neither the full suite nor the smokes ran for this state, and there was no counter-probe in the browser. Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> |
||
|
adminandClaude Opus 5.5
|
c4a9280140 |
Preview inspector edits once per frame, not per input (#274)
Scrubbing a number in the inspector and dragging a colour stop of a gradient told the editor about every input. Pixi repeats each pointer move shortly after, so both gestures paid for two previews per move. The issue asked to measure first and to build only from 10 % per move. The measurement showed about 50 %. - previewingHandlers still writes the model on every input but requests the preview through a FramePreview of its own. The commit cancels a waiting preview first. - The preview handler of the GradientBar in shapeSection.ts does the same. - Wider than the issue describes: the row handlers also serve typing, the arrow keys and the colour picker. All of them preview once per frame now. Measured on stein2, fixture project with 120 extra objects, 120 moves 8 ms apart, three runs each: - Scrub: 236 project events before, 51 to 61 after. 45 to 50 ms per move before, 22 to 27 after. - Colour stop: 238 project events before, 50 to 51 after. 44 to 49 ms per move before, 22 after. - One preview still costs 13 to 17 ms. That price per frame is what remains. Finding, not fixed here: in the pixel art tab the palette colour and the opacity of a layer still preview on every input (PixelArtSide.ts), and so do the head fields of the curve tab. Neither was measured. Tests: - Gate: 198 files, 2907 tests (2903 + 4), exit 0 - e2e, full run: 1616 checks passed (1615 + 1), exit 0 - Smokes: 24 / 19 / 21, exit 0 - Four new unit tests in tests/editor/frame-preview.test.ts, two for a row and two for a colour stop - One new e2e check in module 02: a held scrub gave 10 project events in 12 frames, and the value is there before the release - Four unit counter-probes fail, 1 to 2 tests each. They ran on stein2, not in the container. - The browser counter-probe fails the new check with 50 events in 16 frames Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> |
||
|
adminandClaude Opus 5.5
|
f14c4ecb77 |
Show the frame rate the measured times allow in the overlay (#275)
The fps line of the performance overlay stops at the display's rate, 60 on most screens. It does not tell how much room a game has left. The new top line answers that from the times the overlay measures. - possibleFps in src/editor/frameMeter.ts is 1000 ms over the sum of the five areas, rounded down. It has no number while nothing took any time, and the overlay shows a dash then. - The editor's share is in the sum, because it costs time while playing in the editor. A released game can do a little better. - It is an upper bound. The GPU's time is not measured and not in it. - e2e 59e reads the lines one further down and checks the new line against the times it measured itself. Tests: - Unit frame-meter: 11 passed (+2 for possibleFps) - Gate: 197 files, 2855 tests, CHECK EXIT 0 (2853 + 2) - e2e 59: ALL PASSED, 19 checks (+1), on melektaus-atx - Counter-check: possibleFps without the editor's share fails the unit test - The e2e total of 1602 is counted (1601 + 1), not measured Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> |
||
|
adminandClaude Opus 5.5
|
77f4c2c1a3 |
Show entities and time per area while playing in the Game View (#275)
A game that stutters gave no hint where the frame goes. The Game tab now has a Performance switch. It shows a small overlay in the top left corner of the Game View while a game runs: fps, the number of entities and the mean milliseconds per frame for each area, averaged over half a second like the fps counter. - src/editor/frameMeter.ts holds the pure rule. FrameMeter sums the areas per frame, closes a window every 0.5 s and formats the lines. - World.timeSystem times every system the world ticks. PlaySession maps the systems to Behaviors, Physics and Animation and sets the hook again after Load scene. - Animation has its own line. Counting the AnimationSystem under Behaviors would have skewed that number. - Drawing is the build of the game picture plus app.render(). It is main thread time only. The GPU work after it is not in the number, and app.render() draws the whole canvas including the panels. - Editor is the rest of the editor tick after the systems and the game picture: mirroring into the model, panels and console. - The overlay lets clicks through to the game. It shows dashes until the first window closes. The switch is off by default and is not saved. The released game (#266) runs without a meter. Tests: - Unit frame-meter: 9 passed. - Gate on melektaus-atx: 197 files, 2853 tests, CHECK EXIT 0. - e2e 59 on melektaus-atx: ALL PASSED, 18 checks (13 before, +5 in 59e with a real mouse on the switch). Run twice. - Three mutations were caught: the editor share not subtracting the systems (2 unit tests), systems running in pause not reported (1 unit test), the overlay getting no times (59e). - The e2e total of 1601 is computed (1596 + 5), not measured. Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> |
||
|
adminandClaude Opus 5.5
|
ded71a92c9 |
Pick the target of an object variable in the Scene View (#276)
Choosing the target of an object variable meant finding its name in a dropdown. With many objects, or several with the same sprite, the name alone does not say which one it is. The eyedropper lets you click the object where you see it instead. - Every object dropdown gets an eyedropper button next to it. This covers variables, struct fields and list entries, in the Inspector and in the Variables tab. - The button opens the Scene View or the container tab the object lives in. A strip above the view names the field and the current candidate and offers Take and Cancel. The cursor is a crosshair. - A click picks a candidate and writes nothing yet. The candidate gets its own cyan frame, the selection stays on the object with the variable. - Clicking follows the selection rule. `pickOn` in `src/viewport/pick.ts` uses `pressOn` and only counts objects the dropdown offers. A click on empty space keeps the candidate. - Enter or Take writes through the same handlers as the dropdown. That is one undo step, or none if nothing changes. - Esc, Cancel, a right click in the view or a second click on the button cancel without writing. So do a tab switch, another selection, undo, redo, play and loading a project. - After Take or Cancel the editor goes back to the tab the pick came from. - While the eyedropper runs, the view does not drag, marquee, paint, show handles or open its context menu. Panning and zooming stay. Found on the way: - Started from the Variables tab, the click missed the object. The Scene View is hidden while that tab is open, and the layout skips hidden children. The strip appeared then, the view moved down by 32 px but kept its old height. `Editor.display()` now lays the row out again after showing it. Tests (on melektaus-atx): - unit pick and object-pick: 27 passed, 13 new - gate: 196 files, 2844 tests, CHECK EXIT 0. Two more come from svg-icons, which checks every icon twice. - e2e 57: ALL PASSED, 12 checks, 5 new (57e to 57g) - Counter-checks work. Without the layout fix 57g fails. Picking objects the dropdown does not offer fails 2 tests. Writing on cancel fails 2 more. Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> |
||
|
adminandClaude Opus 5.5
|
6d4247ebf8 |
Paste where the view shows it, editor offsets included (#263)
Paste mixed two frames. The pointer comes from the Scene View, which draws every object moved by the editor offsets of it and its parents. Paste turned that point into a local position through the parents' plain world transform, so the copy landed beside the pointer by the offset of the parent it went into. Without a pointer, an original with an offset of its own had its copy placed beside its game position, which the view does not show. - A copied root now remembers where the view showed it (`ClipRoot.shown`, from `editorTransform`) instead of its world position. - New `editorLocalPositionFor` in `properties/transform.ts` turns a shown point into a local position through the parent chain with the editor offsets, as the view draws it. Paste uses it. - The copy itself still gets no editor offset of its own, as since #240. In the game it stands where it was drawn, minus the offsets of its parents. - Re-parenting under a parent with an offset still keeps the game position, so the object jumps in the view by that offset. That is a different rule from paste and is left as it is. Tests: - Unit (clipboard, groups, references, transform): 50 passed, 2 new. - e2e 51 on melektaus-atx: ALL PASSED, 12 checks, 1 new (51f). - Gate on melektaus-atx: 195 files, 2829 tests, CHECK EXIT 0. - Counter-checks: without the paste fix both new unit tests fail (copy at 540/470 instead of 500/500) and 51f fails by exactly the 60/-40 offset. With the root remembering its world position again, the own-offset unit test fails. - No full run. The e2e total of 1591 is 1590 plus 1. Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> |
||
|
adminandClaude Opus 5.5
|
14972d057f |
Refactoring round 8: hide data files, safe saves, Esc as Cancel (#85)
Recurring cleanup round over the code since round 7 (
|
||
|
adminandClaude Opus 5.5
|
24d360aeec |
Add zoom steps and a larger start caption to the game link (#266)
The released game only ever zoomed in whole steps up to 400%, so a small camera on a large screen stayed far smaller than it could be. The "Click to play" caption was drawn in the 11 px panel title size and was easy to miss. - GAME_SCALE_STEPS gains 300%, 500% and 600%. The game tab picker, Auto in the editor and the game link all read the same list. - The start caption takes its size from the new Theme.captionSize (16) instead of a constant in GameScreen. - The player page keeps the default arrow cursor at all times. It no longer switches to the hand over the caption. Tests: - view.test: Auto for 320x180 in 2000x2000 is now 6, with cases for 3 and 5. play-settings.test takes 2.5 and 8 as invalid steps. - e2e 60 checks the caption against the panel title size and the arrow cursor before and after the start. Module 03 follows the new step list. - ./check.sh 2808 tests, CHECK EXIT 0 (before the last Theme tweak, which changes no test). Full e2e run ALL PASSED, 1574 checks. Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> |
||
|
adminandClaude Opus 5.5
|
94c1055895 |
Throttle what the editor shows while a game runs (#265)
With the behaviors fixed, the scene Performance test still ran at about 23 fps with 500 entities. The rest of the frame went to the editor: every spawn or destroy rebuilt the hierarchy with all its rows, redrew the scene view behind the game tab and refreshed every panel. The game itself is cheap. What the panels show of it now follows a preset in the project settings. - New section While playing in the project settings with three presets: Live, Balanced and Minimal. Every project reads as Balanced, including those saved before the setting existed. - Live keeps today's behavior. Balanced brings hierarchy and panel values up to date 4 times a second and stops redrawing the hidden scene view. Minimal updates hierarchy and values only on pause and throttles the graph tabs as well. - The graph and state machine tabs stay live under Balanced. At 4 updates a second the beads on exec edges stutter, and the tabs draw only while on screen. This differs from the issue proposal. - The game itself is never throttled. Pause, step and stop bring every panel up to date at once, and a change of structure that falls between two updates is kept for the next one. - The rule lives in editor/playThrottle.ts as panelPolicy and PanelClock. PlaySession asks it after every frame. - Objects spawned at the top level go into a hierarchy group named after their asset, so hundreds of gold pieces fold into one row. Groups start folded. Measured on a throwaway copy of Performance test, 3 s each, fps: - About 500 entities: Live 38.6, Balanced 56, Minimal 60.6. - About 315 entities: Live 56.9, Balanced 60.5, Minimal 60.6. - p95 frame time at 500 entities: 60 ms, 41 ms and 23 ms. Tests: - ./check.sh: 193 files, 2799 tests, CHECK EXIT 0. - GM_STEPS=1,18,59: ALL PASSED, 54 checks. - Full e2e run (local): ALL PASSED, 1562 checks. - tests/editor/play-throttle.test.ts: presets, update rates, kept structure changes, flush, spawn group and loading old projects. - New e2e module 59: preset chosen with the mouse, measured update rates, scene view behind the game tab, Minimal with pause. - Module 03 now expects spawned objects in their group row after the next update. - Counter-checks: 4 in unit tests and 2 in the browser, each failing as expected. Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> |
||
|
adminandClaude Opus 5.5
|
0c41cb97b1 |
Clip the children of an object to a clip area (#260)
An inventory grid could not scroll, because nothing could cut a child off at an edge. A game also had no way to hear the mouse wheel. Both are needed for a scrolling list, a dialog text or a window with more content than room. - A new object type Clip area has width and height and turns, scales and mirrors with its parent. The size gizmo drags width and height. - Everything below a clip area, on every level, is drawn only inside its rectangle, in the Scene view as in the game. Nested areas cut to their intersection. The rule works on a convex polygon, so a turned area cuts right as well. - On click, Is hovered and On mouse wheel do not hit a cut-off part. The Scene view does not pick it either. - In the Scene view the area is a dashed frame that is grabbed only at its edge, so a click inside lands on the content. The eye under Shape hides the frame. In the game the area is invisible. - While an object below an area or one of its parents is selected, the Scene view shows the cut-off part at 30 % opacity and it can be grabbed there. The rule lives in core/properties/clip.ts. - The Properties node knows the type Clip area. - The new event node On mouse wheel fires by the rule of On click. Its delta counts in notches, positive is down, and a frame's turns arrive as one value. It also gives x and y. Limits: - Only sprites and texts show the faded rest. Tilemaps and particles are cut and can be grabbed when open, but are not shown faded. - Masks by texture shape are out, as noted in the issue. Tests: - ./check.sh: 2773 tests, CHECK EXIT 0. - Full e2e run (local): ALL PASSED, 1549 checks, measured. - tests/core/clip-areas.test.ts: 12 tests for the cut rule, scene and game, save and load, hits, the wheel with and without owner, the notch conversion and the open rule. - e2e 58, 5 checks with real mouse and wheel: the scene cuts (74 of 74 red inside, 0 outside), a click on the cut part picks nothing, the selected rest is faded and grabbable, the game cuts, one notch logs 1. - e2e 04 and 46 count the object types and the eye rows. They now include Clip area. - Counter-checks: 6 in unit tests and 3 in the browser, all fail as expected. The originals were restored and checked with cmp. Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> |
||
|
adminandClaude Opus 5.5
|
4857bb75e6 |
Show lists in the inspector and variables in their own tab (#252)
The List tab could show one list at a time and was the only place to see its items. A list now shows its items right where it lives, and a new Variables tab shows all variables of an asset or placed object. - InlineList draws the items of a list under its row in the inspector, in struct fields and in the Variables tab. A list inside a list or a struct field is drawn the same way, one step indented. - The index column is the indent. Items sit under their list without an own margin, and the index column is 16 px wide instead of 28 px. - Above 20 items (INLINE_LIMIT) the rest collapses into "... N more - open in tab". During a run the rows show the values from the game. - ListHead puts "N items" and "+ Item" in one row. "N items" opens the list in a tab. A separate Open button squeezed the counter to zero width in the narrow inspector column. - VariablesEditor shows every variable of a behavior asset, a variables asset or a placed behavior. On an asset it edits the declarations. On a placed object an edit only overrides that object, with the usual reset and push buttons. - Opening a list inside a tab adds a new tab and keeps the open one. valuesKey gives each list its own document, so a list that is already open is shown instead of opened twice. - Titles read "Pickup · Variables" or "Listy · nums · [3]". The tab closes when its asset or object is deleted. - Lists on node inputs stay inline only, a node owns no variables. - The List tab, ListEditor and the __gm.list hook are gone. Tests: - ./check.sh: 181 files, 2645 tests, CHECK EXIT 0 - GM_STEPS=1,21,22,32: ALL PASSED, 123 checks - e2e 21 is rewritten for inline lists and the new tab, 22 and 32 are adapted. Sum in README: 1486 (+6 in 21, -1 in 22), counted by hand. - Counter-probes fail as expected: sub-lists not told apart (1 unit test), sub-list replacing the open tab, all items drawn inline (60 rows instead of 20), no live values (0 rows at 24 items in a run). Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> |
||
|
adminandClaude Opus 5.5
|
a5ae21481b |
Type point values, snap and scrub the preview in the curve tab (#248)
Building a curve by mouse alone was fiddly: there was no way to put a point on an exact value, no grid, and the running preview could not be stopped at a chosen moment. The hand cursor over points also looked like a link instead of a drawing tool. - Number fields t and v in the header show the selected point. Typing or dragging on them goes through the same rules as a mouse drag, so points never overtake and handles stay clamped. One undo step each. t is greyed out on the two end points. - The magnet button from Vector art snaps points and handles to a 0.05 grid in t and v, when placing on free space and when dragging. - Points and handles keep the default arrow in the curve tab and in Vector art. The pixel art palette dropped pointer as well, which is beyond the issue. Collider corners never had it. - The preview now starts off. A vertical time line with a knob under the t axis sets t when dragged sideways. Dragging the dot on the rail jumps to the first t where the curve reaches that value, or to the closest one if it never does. - The rules are pure functions in curveView.ts (withCurvePointSet, snappedToGrid, shareAtValue, previewSecondsAt), the canvas only calls them. Tests: - ./check.sh: 180 files, 2616 tests, CHECK EXIT 0 - GM_STEPS=1,47,53: ALL PASSED, 87 checks - 4 new unit tests in curve-view.test.ts, 4 new e2e checks in 53 (53h-53k) and 1 in 47, all with real mouse and keyboard - Counter-probes bite: without "first t" 1 unit test fails, with pointer, no snap, no field commit, no scrub or preview on 5 browser checks fail, pointer in Vector art fails the new 47 check Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> |
||
|
adminandClaude Opus 5.5
|
393b8ec7f9 |
Build your own easing curve and use it on keys and Lerp (#247)
The built-in eases cover the usual shapes, but a game often wants its own: a coin that bounces twice, a door that overshoots and settles. A new asset type holds such a curve, and keys and the Lerp node can pick it instead of a built-in ease. - New asset type "curve": points like in Vector art, x is t and y is the value. A new curve is the straight line from (0, 0) to (1, 1). - One pure evaluation in src/core/model/curve.ts serves the timeline preview, the running game and the Lerp node. - The curve always has one value per t. The end points stay at t 0 and 1, points cannot pass each other, and a handle that reaches past its neighbour is shortened along its direction. Loading a hand-edited file applies the same rules. - Curve tab: click on the line to insert a point that keeps the shape, click on free space to put one there, drag points and handles, double-click or Delete removes, Alt-click toggles round and sharp. Every step is one undo step. - Presets: all 30 built-in eases plus Linear, fitted with adaptive subdivision. Each stays within 0.4 % of the built-in ease. - Preview: a dot runs along the curve once a second, a second dot shows only the value. The Preview button stops it. - Animation keys get "Curve" under Easing with a curve picker. Lerp gets "Curve" under Ease, and its result may overshoot b. - A missing or unpicked curve runs linear. The inspector says so, the node shows it as a problem, and deleting a used curve warns with the number of keys and Lerp nodes. Tests: - ./check.sh: 180 files, 2612 tests, CHECK EXIT 0 - GM_STEPS=1-6,25,53: ALL PASSED, 309 checks - New e2e module 53 with 13 checks, all with the real mouse. Expected values come from its own Bezier evaluation. - Counter-checks bite: without Bezier evaluation 4 unit tests fail, without handle clamping 2. In the browser, a key that cannot find its curve, a click that sets no point and a handle drag that moves the point all turn checks red. Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> |
||
|
adminandClaude Opus 5.5
|
074bda2247 |
Give texts, tilemaps, particles and containers the turn knob (#242)
The knob on its stem turned and scaled only sprites and colliders. Every other type with Scale and Rotation had to be typed into the inspector. - Text, tilemap and particle source get the knob above their box. Edge and corner grips stay with sprite and collider, the only types with a width and a height of their own. - A container gets a thin frame round all of its content, turned and scaled with it, and the knob sits above that frame. It turns and scales round the container's origin, so the content swings with it. A container with no content gets the knob above its symbol. - contentFrame in sizeGizmo.ts is the pure rule for that frame. sizeGizmoEditor.ts wires it in. - One pull is one undo step, as for sprites. Not clicked in the browser: scaling (as opposed to turning) of a container by the knob. Only the shared code path covers it. Tests: - ./check.sh: 178 files, 2573 tests, CHECK EXIT 0 - 2 new unit tests for contentFrame - e2e 29k, 4 checks: knob on text, tilemap and particles, frame round the container's content, a real pull turns the container by 20.9 degrees round its origin with the content on the computed pixel, one undo takes it back - 4 counter-probes over #242 and #243 bite (2 unit, 2 browser) Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> |
||
|
adminandClaude Opus 5.5
|
2eeabf7c23 |
Drag a whole selection and join existing groups in the hierarchy (#241)
Three follow-ups to the hierarchy groups. Dragging a row that belonged to a multi-selection moved only that one row. The group dialog could only create a new group. The group row drew its folder in front of the label, unlike every other row in the hierarchy. - Dragging a selected row moves every selected object. This holds for reordering, dropping into a group or between its members, dragging out of a group and dropping onto an object as new parent. - The moved objects land side by side in hierarchy order, whichever row was grabbed. The whole move is one undo step. - A selected child of a selected object travels with its parent, not on its own. Dropping the selection onto its own rows does nothing. - Dragging a row that is not selected still moves only that row. - hierarchyDrop.moveObjects replaces the single-object rule. One object is the case with one element, so the old drop tests hold unchanged. - The group dialog has a "Group" dropdown: New group or an existing group. Picking a group greys out the name and turns the button into "Add". A group that holds all chosen objects already is not offered. - Rename keeps using the dialog without the dropdown. - ListRow draws an end icon at the very right and the hint left of it. Only the hierarchy uses iconAtEnd, so other lists do not change. - New test hook __gm.hierarchyHint() gives the centre of a row's hint. Not clicked in the browser: dragging a selection in the container tab and onto an object as parent. Only the unit tests cover these. Tests: - ./check.sh: 178 files, 2564 tests, CHECK EXIT 0 - e2e 1 + 52: ALL PASSED, 27 checks - 7 new unit tests in hierarchy-drop.test.ts, 4 new e2e checks in 52i and 52j with real clicks and a real drag - 4 counter-probes bite: drop rule ignores the selection (5 unit tests fail), icon column not kept free, dialog ignores the picked group, panel ignores the selection (only o2 lands in the group) Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> |
||
|
adminandClaude Opus 5.5
|
893b81f798 |
Select a range of rows with shift-click in the hierarchy (#241)
Ctrl- and shift-click only added single rows to the selection. With many objects spread over the hierarchy, picking a run of them meant clicking each one. Shift-click now selects everything between the anchor and the clicked row, as in a file explorer. - The anchor is the row last clicked without shift, plain or with ctrl. A second shift-click redraws the range from the same anchor. - Ctrl+shift-click adds the range to the current selection instead of replacing it. - A collapsed group inside the range brings all its members. Children hidden under a collapsed parent stay out, since they are not shown. - Without an anchor from the hierarchy, the primary object picked in the scene view serves as anchor. With no selection at all, shift-click adds the single row as before. - The range rule is a pure function in hierarchyRange.ts, so it is tested without a browser. HierarchyPanel keeps the anchor. Not checked in the browser: ctrl+shift-click and the anchor taken from the scene view. Only the code path covers them. Tests: - ./check.sh: 178 files, 2557 tests, CHECK EXIT 0 - e2e 1 + 52: ALL PASSED, 23 checks - 5 new unit tests in tests/editor/hierarchy-range.test.ts - New e2e check 52h with real clicks - Counter-check: without the range, 52h fails with ["o2","o5"] Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> |