The graph could hold any number of nodes and said nothing about which of them
belonged together. Groups and comments are two separate things, as decided in
the issue: a group is a titled box that carries the nodes it encloses, a
comment is free text that carries nothing.
Both live as optional arrays on Graph, not as registry nodes. A comment that
were a real node would run through the interpreter, show up in the drop
palettes and be compiled into a shader — the wrong place for a piece of text.
As arrays on Graph they exist in all four graph kinds at once, and a document
without them means exactly "no groups", so no format bump.
Membership is computed when the box is grabbed, never stored: the center of a
node inside the box travels with it, and a node dragged out is simply out. A
box inside a box travels with the outer one, its own nodes included. A group
is grabbed by its title bar only — its body stays transparent to the pointer,
or a rubber band could never be drawn across the nodes it holds. Deleting a
box deletes the box; the nodes stay where they are, because a box that
silently took ten nodes with it would be the most expensive surprise in the
feature.
The color is a free picker, and the title color follows from it: relative
luminance per WCAG, threshold at 0.179 where the two contrast ratios meet —
not 0.5, which would pick white on mid grey where black reads better.
Resizing snaps the far edge to the grid, not the width, so the corner that is
not being dragged stays put. The minimum size rises in whole steps for that
reason: 80 is no multiple of 24, so a box squeezed to the stop would have sat
off-grid in exactly the mode meant to keep it on.
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
Set state and State branch derived their ports from the graph, so a machine
that came out of a variable or a list had no ports at all: nothing to set,
nowhere to branch. It could be passed around but not operated.
stateByName() resolves id first, then name; a name two states carry answers
with nothing, the same rule transitionTo already follows for two transitions
of one name — without something in the graph that decides between them, any
pick would be a guess.
Set state by name takes the machine and a text, and has a second exec output
not found, so a typo is not swallowed in silence. State branch gains a
derived else that fires whenever no state output matches — no state set, a
state of another machine, or a machine that arrives as a value and therefore
has no state outputs at all. A flow that enters State branch now always
leaves it somewhere.
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
The suite spent 88% of its step time asleep: 564 s of steps, 496 s of
them in sleep(n) - fixed spans estimated by hand and then copied from
step to step. That is why it was slow, and why it flickered.
The signal is afterFrames(count, timeout) in ui/render.ts, exposed as
__gm.afterFrames(). It wakes the loop itself, because an editor that
draws nothing would never redeem a promise of a frame, and it gives up
after a timeout instead of hanging the run. settle() in the harness
waits two drawn frames (~32 ms) instead of 150-300 ms and falls back to
sleep(150) when the hook is missing (an old build): silently not
waiting would make every later check a coin toss.
Every action goes through it now - click, doubleClick, wheel, drag,
dragAsset, press, typeText, select, mutate, undo, redo - and with that
about 550 sleep() calls behind those actions became redundant, helpers
that are nothing but a mutate in a coat included. What a frame cannot
answer got its own condition instead: waitUntil(expr), play()/stop()
waiting on __gm.state.mode rather than on 300 ms, saved() for the
autosave (the two hand-written polling loops sampled at 300 ms for
something that arrives after a second), and showTab() as a real tool -
47 places called evaluate("__gm.showTab(...)") raw, and 24 of them
waited for nothing at all and read the old panel.
564 s -> 243 s of step time, the waiting share 88% -> 76%. Three kinds
of wait were kept, and each one bit when it was taken away: loading
bytes (textures, fonts), game time that a repaint cannot stand in for
(time scale, shader and particle clocks, the live values a running
graph carries), and the inertia the scroll step measures on purpose.
Two things the new speed uncovered, both real: 25-animation read the
frame menu unfiltered and had frozen an incomplete list (the CI failure
on c990dbc), and 33-render-on-change measured idleness while the
autosave of the step before was still painting - it waits for
saveStatus to leave dirty/saving now, so it measures that nothing
happens any more instead of that it waited long enough.
#63: a shader Property node named "width" quietly took over the sprite
row of the same name. isSpriteProp lives in PropertySchema now and is
derived from FULL_SCHEMAS.sprite instead of being a second list that
drifts. isValidPropertyName rejects those ten names, and the compiler
reports it at the node as its own problem: "width" is a sprite
property, told apart from "not a word" and from a duplicate.
#64: Divide emitted (a / b) and handed NaN to the driver. It emits
divide(a, b) now, with the guard in the prologue next to straight(),
scalar and per channel: zero divided by zero is zero. That was already
the house rule in the behavior and particle graphs - only the shader
had never been told. Clamp comes along as a shader node for the same
reason: the behavior catalog has had it all along.
CI found the gap the hard way: with every kind of asset in the project
the new scene sits below the panel, and the right click for "Set as
start scene" landed somewhere under the list instead of on the row.
locate() only asked whether a text was visible, and a masked row still
is - it is merely clipped away.
locateAll and overlayTexts now walk the tree together (eachText) and
carry the clip of every ancestor, measured on the widget that owns the
mask: Pixi v8 hands a Graphics set as a mask to the mask effect and
reports empty bounds for it, so asking the mask itself declares every
masked text in the editor missing. Two hooks with two notions of
"visible" was the second half of the same bug.
The panel also scrolls the selected row into view now, the way the
hierarchy has always done - an asset selected elsewhere has to be
findable in the list, test or no test. And step 21 learned that scene
is a property kind.
Load scene sets a flag on the World like Stop and Restart do; the swap
happens after the tick, and the last wish of a tick wins. Exactly one
thing crosses over: the SharedState, so global variables and global
machines keep what they know while everything local is built anew.
Loading the scene that is already running rebuilds it, which is what
"reset the level" means when the score must survive.
A run starts either from the start scene (a new project field, set from
the asset panel and marked with an arrow in the list) or from whatever
scene is open. The toggle next to Play says which question is asked and
remembers the answer in localStorage: it is a way of working, not part
of the game.
Sounds no longer end because a scene ends. A voice belongs to the
behavior that started it and stops right after On destroy, so the scene
swap is no longer a special case at all. For the enemy that plays its
explosion and destroys itself in the same breath there is now a
detached input on Play sound.
The scene selector stays usable while a run plays, because a double
click in the asset panel already did the same thing unguarded. It moves
what the editor looks at, not what the run plays.
The height cap used to be a constant 420, and the check wrote that number down.
Since #43 the cap is the canvas minus a tenth at either end, which is 640 on an
800px screen - so CI failed on a picker that is behaving exactly as intended.
The check now reads the budget off the screen and reports rect, budget and
screen height when it trips, so the next change to the margin cannot strand it
again.
Typing "variable" into the node palette landed on `Run behavior`, because the
filter weighed label, type and description alike and then sorted by category.
`searchRank` in `src/ui/search.ts` now ranks a match: exact label or type, then
prefix, then label, then type, and only last a hit that lives in the
description alone. Category and alphabet order within a rank. The searchable
`Menu` uses the same function, so searching means the same thing everywhere.
The `+` menu grew to fifteen entries in declaration order. It is built in two
alphabetical groups now -- the types that go into a scene, then the ones that
stay in the library -- with a separator between them, the split `isPlaceableType`
already draws. `ASSET_TYPES` itself stays untouched: it is also the
serialisation and check order. A search flattens the groups and drops the lines.
Popups were capped at fixed heights (320 menu, 260 palette, 340 pickers) while
the canvas had room to spare. `Popup.roomFor()` measures its own chrome and
takes the window height minus a tenth at each end. Placement clamps
asymmetrically: the bottom margin is enforced, the top is only a budget, so a
menu anchored near the top stays at its button instead of being pushed off it.
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
Sounds follow the road fonts already paved: the file goes to the server
content-addressed under its sha256, the project keeps a named asset that
points at it, and nothing is ever re-encoded. The format is read from the
file's own signature, not from what the browser claims - the same .m4a
arrives as audio/mp4, audio/x-m4a or as nothing at all.
Playing is two nodes. "Play sound" takes the asset and may raise or lower
its volume; every call is its own voice, so two jumps in a row are two
jumps heard. Its loop input is a choice of three - from the asset, on,
off - because a checkbox has to spend one of its two positions on "not
set" and would lose a case: an asset that loops could then never be
played once.
Below the graph core stays browser-free: NodeContext hands out an asset
id, BehaviorSystem resolves it against the project and folds the asset's
own volume and loop into the call, and only viewport/SoundLibrary knows
about Web Audio. A run without a sink plays nothing instead of throwing.
The CI browser is muted, so the ear is no witness: the debug hook counts
started and stopped voices, and step 34 reads that counter.
Four issues that all reach for the same line: how the current state is
read and written. Splitting them into four commits would mean four
states of the tree that do not compile, so they arrive together.
#55 start state — the machine asset carries an optional `start` holding
a State node's id. Right-click a state to set or remove it, a ring in
the node's title says which one it is. A dead id (the state was deleted)
reads as "no start", so nothing has to clean up after a deletion.
#53 entered/exited — `On state entered` and `On state exited`, one exec
output per state. Every change now goes through a single `setState`
that reports it; BehaviorSystem delivers it after the exec flow that
caused it, `exited` of the old before `entered` of the new, round after
round until the queue is empty, with a cap that stops a ping-pong graph
with an endless-loop error. A local machine tells the instance that
switched, a global one tells every instance holding a matching event
node. The start state fires `entered` too: per instance for a local
machine, once per run for a global one.
#57 reading — `Current state` with `name` for showing and `id` for
comparing, `Is in state` with one boolean per state. Neither has a
`run`, so `read` learned `def` and `lookup`, and the catalog test knows
this third kind of node.
#54 seeing it — during a run the state machine tab marks every state
some instance is holding faintly, and the one held by the selected
scene object's instance strongly.
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
The renderer is taken off the ticker; the ticker itself keeps running, so
the clock, a live world and the panels still get their step. Drawing now
happens inside a 200 ms trailing window that every pointer, wheel and key
event, every Widget.invalidate/resize, every Stack.relayout, every
EditorState.emit and both library onChange hooks reopen. The window rather
than a single frame is what makes the ~70 direct redraw() calls that never
pass through invalidate() safe, along with repaints an event only starts:
a microtask, a texture upload, a resolved font.
Editor.movesByItself() keeps asking for every frame while Play or an editor
run is on, a time shader is on screen, or the particle or animation preview
is showing.
The FPS counter now counts drawn frames over the time the renderer was
awake. Idle seconds are not slow seconds, so it answers "how smooth while
it moves" and holds its last answer instead of falling to 0 at rest.
Measured on the built stand, 20 s per variant, CPU of all chromium
processes from /proc: kept awake 75.5 % of a core at 60 fps, render on
change 8.8 % with 0 frames drawn, awake again 83.9 % as an order probe.
No colour check can see a missing repaint: pixelAt extracts from the stage
on demand and is just as green on a screen frozen a minute ago. Step 33
watches the new __gm.renderStats() counter instead.
`Sqrt` already exists in the behavior graph (`data/Sqrt.ts`) and in particles
(`ParticleSqrt`); the shader was the only graph without it. `Pow` with exponent
0.5 does the same job, so this is convenience, not a missing capability -- a
radial falloff no longer needs a node whose purpose has to be read off its
parameter.
Like `Pow` it cannot go through `unary()`: GLSL leaves `sqrt` undefined below 0,
so the value is held there with `max(value, 0.0)`. That form takes a float
second argument for a `vec3` too, so unlike `pow` the exponent broadcast has no
counterpart here.
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
`Variables` pushed `Font` under the menu's mask edge: `locate` still finds the entry, a click there
lands on nothing, `__gm.fontPicker()` is null and reading `.captions` throws. Only step 31 carried
the scroll workaround, so step 30 fell. The helper moves to `lib/scaffold.mjs` as `pickAssetType()`
and both steps use it.
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
`nodeUnder()` recomputed the node's face as `0 <= x <= w`, while the pointer events follow the
`hitArea`, which reaches `PORT_HIT_RADIUS` past the edge. An input port sits at exactly x = 0, so the
global point rounded back landed a hair outside: the drop counted as one on empty canvas, the node
palette opened and swallowed every later click – four checks of step 6 at once. `NodeView` now
answers from that same `hitArea`, and the step also checks that no palette is open.
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
This reverses the design of the previous commit. `PropertyDef.scope` is gone
without replacement: a behavior variable is an object property again, without
exception, and sharing is something you point at rather than something you
declare twice.
A **Variables asset** is declarations and nothing else -- no graph, no position,
never placed, no tab of its own (`TAB_OF_ASSET` is already `Partial<>`, so that
costs no line). A `Variables` node names one through its new `variablesAsset`
setting, empty meaning the behavior's own variables as before, and then reads
and writes one value per key for the whole run. Its property list follows the
chosen source, which was the actual request: a value another graph declared is
now offerable, where before every participant had to declare the name itself.
That deletes more than it adds (-72 lines net): `globalConflicts` and its
run-stopping kind clash, `SetVariableScopeCommand`, the scope picker, both
object-inspector filters and the "shared by the whole run" note on the placed
object. A typo is no longer a silent second variable -- naming an asset is
picking from a list. And two Variables assets may carry the same key without
meeting, because the asset is the key, not the name. The one shape it copies is
the one that already existed: `Set state` picks its machine the same way.
Lifetime is unchanged. The bag is built at `BehaviorSystem.start()` from the
declarations and never written back, so playing in the editor cannot change the
project -- which is the whole reason a counter must not be an object property
(`World.syncToModel` would `commit()` it, and the coin counter would stand at 7
for good).
Full symmetry across that gap, without mirroring anything. Two named wires:
`Inspector.liveVariables` shows the values as they stand while a run is on and
falls back to the declarations when it ends, and `adoptDeclarations()` takes a
key into the run *only where the document changed it since the last sync*.
Without that condition any unrelated project edit would snap a running counter
back to its starting value; a counter-test bends exactly that and falls over.
Nothing was ever cached, incidentally: `GraphInterpreter` only pulse-caches
nodes without a `read`, and the variable node has one. The wire was missing.
The state machine `Scope` row is now an ordinary `enum` row through
`createFieldRow`. It was hand-built from an `HStack` with a ghost dropdown and
began ~34px left of every value above it; the explanations beside `Local` and
`Global` are gone from the menu, the sentence below the row keeps saying it.
Machine scope is otherwise untouched -- `StateMachineAsset.scope`,
`SetMachineScopeCommand`, `stateBag()` and its persistence all stand, so #59
stays closed as built and `Scope` as a type now carries machines alone.
Six counter-proofs, each biting at its own guard. One of them did not bite at
first: the suggestion list was computed twice, in `nodeSection` and
`portSection`, so only the browser test covered the request itself. It is one
named function now, `variableChoices`, with a unit test of its own.
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
A variable or a state machine declared `global` keeps one value for the whole
run instead of one per behavior instance. The scope sits on the declaration --
`PropertyDef.scope` and `StateMachineAsset.scope`, both optional, absence
meaning `local` -- and `local` is never written, so every project made before
this saves back unchanged.
**The name is the key.** Two behaviors declaring a global `score` mean one
variable; a behavior declaring `score` locally keeps its own. Kinds that
disagree about one global name stop the run before it starts, with the two
behaviors named; starting values that disagree are a warning on the behavior
that declares it, and the first declaration wins (`globalConflicts`).
The runtime needs no redirection layer. A global variable falls out of
`schemaForObject`, so it never reaches `entity.props` -- and then the whole rule
is "whoever declares the name takes their own value" (`graph/sharedState.ts`).
The `Variables` node is untouched and stays transparent: switching a variable to
global breaks no existing graph, because `GraphInterpreter.readAll` builds a
fresh object per read anyway and only asks `port.key in all`.
That same cut answers the inspector. A shared value has no owner, so the placed
object shows no row for it and can hold no override -- `SetVariableScopeCommand`
takes the deviations that were there and undo gives them back.
Both places say it in words rather than leaving a glyph to be guessed: the
declaration explains the mark below the list, and the placed object names the
variable it no longer holds instead of claiming the behavior declares none --
which is what it said before, untruthfully. Screenshots of the e2e run turned
that up; no check had been looking at it.
`SharedState` hangs off `NodeContext`, is built in `BehaviorSystem.start()` from
the *declarations* rather than from any instance (a global variable exists
before its behavior is placed), and is thrown away with the run: nothing is
written back, not even in the editor run. `GraphInterpreter.call` passes it on
through `...ctx` while nested calls keep getting fresh local variables, which is
why `program.defaults` is stripped of global keys.
Two traps this hit. `defSignature`/`assetSignature` have to carry the scope or
the inspector does not rebuild after the switch -- and a state machine has no
rows at all, so its scope is appended to the signature by hand. And the object
inspector does not go through `schemaForObject` for behaviors, it reads
`asset.variables` directly; filtering in one place was not enough, and no unit
test covered that path. The e2e caught it (`global: true` where false belonged),
and the rule now lives in one named function, `objectRows`.
Scopes `object` and `scene` are deliberately not built. The object case already
has a route (`Object by name` -> `Properties`), and a run knows exactly one
scene, so `scene` would be indistinguishable from `global` until #39 exists.
Closes#59: a machine's scope is a word on the machine asset, not a setting per
`Set state` node, so the same machine cannot live in two places at once.
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
`deserializeProject` builds each asset's effective schema in pass 1 and coerces
`props` against it in pass 2. For a behavior that schema was
`[...COMMON_PROPS, ...variables]` -- but `runInEditor` lives in
`ASSET_SCHEMAS.behavior`, not in `COMMON_PROPS`, so `normalizeBag` dropped the
value as undeclared. The flag therefore survived no save: every reload switched
it back off.
The fix is the full schema, `schemaFor('behavior')`, which is what
`schemaForAsset` hands out everywhere else.
Found by a round-trip test comparing the whole project rather than one field. An
existing test had the loss written down as its expectation
(`{ enabled, speed }`), which is why nothing ever reported it.
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
A state keeps its `in`/`out` exec pins in the model and the editor never draws
them. That is the whole trick: connecting, undo, deleting a state and saving all
keep working untouched, because `normalizeGraph` filters nodes and never edges,
and no edge ever checks its port key against a NodeDef. Only two places change --
`NodeView.redraw` stops drawing the row, and `portAt` refuses to hand one out, so
an invisible pin cannot be grabbed either.
Transitions are drawn by right-clicking a state, `Make transition`, then clicking
the target. The armed mode takes the same shape as a live drag, so the existing
preview draws it with no second code path, and it dies with Escape, a click on
empty canvas or a switch to another asset.
Removing the pins removed the only handle a transition had: edges have no
hit-test anywhere, and the pin right-click was the sole route to Disconnect.
The inspector's TRANSITIONS OUT / TRANSITIONS IN lists are therefore not a
convenience, they are the delete path.
`GraphEdge` gained an optional `label`, which `normalizeGraph` has to pass
through explicitly or a saved name is dropped on load. `State transition`
replaces `Next state`: it takes the machine on an input port and the name from a
picker, and resolves against the *current* state. Names are deliberately not
unique across a machine -- two states may both have an `alarm` -- so a node named
`alarm` moves whichever state has one, and an empty name follows the single
unnamed edge.
The geometry moved to a Pixi-free `transitions.ts`: a gap to the box border, and
a fan that puts a pair of opposite edges beside each other instead of on top of
each other. Keeping it as plain maths is what let a screenshot bug become a unit
test -- an earlier pin-to-pin line ran under the target node and took its
arrowhead with it, because `nodeLayer` sits above `edgeLayer`.
One limit stands and is not fixed here: `ConnectCommand` rejects a second edge
between the same two states ("Already connected"), because every transition
hangs off the same two ports. With names, `A --alarm--> B` beside
`A --seen--> B` is a sensible pair, so this is worth its own issue.
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
Four ways erase a derived port and take no edge with them: deleting a state,
deleting the `State machine` literal, deleting `Behavior start`/`end`, deleting
the asset. The common cause is `RemoveNodeCommand` clearing only its own graph,
so the fix sits in `drawnDef` (graph/nested.ts) and touches no delete site.
A right-click on an edge goes through `view.portAt` only — there is no curve
hit-test. Without a port row such an edge is not merely invisible, it is
unreachable, so the ghost row is the handle Disconnect hangs on.
`resolveDef` stays untouched: it is the truth for interpreter, compiler,
ConnectCommand and dropTarget, so nothing runs or connects through a ghost
without a second guard.
A particle source can wear a shader asset the way a sprite does, and it is the
cheapest place in the editor to wear one: a shaded sprite gives up its batch and
costs a draw call of its own, while `ParticleContainerPipe` breaks the batch for
every field regardless. Five hundred shaded particles are the one call five
hundred plain ones were.
The fragment the compiler emits needed no change, only a second vertex stage:
Pixi's particle vertex is GLSL ES 1.00 and ours is ES 3.00, so it is translated
rather than invented. What it sees is a particle's picture, not its life — the
buffer carries five fixed attributes and takes no sixth, so age, index and seed
stay on the graph, which is what the graph is for.
Two things the issue did not ask about:
`Shader.resources` is an accessor over the names its constructor declared, so a
slot that is not declared becomes a loose JS property and is never bound. The
adaptor writes `uTranslationMatrix` into whichever shader the container names —
without an empty block for it the vertex gets no matrix and the particles land
elsewhere.
`schemaOf` in serialize.ts hung on `schema !== schemaFor('sprite')`, an identity
check a source never satisfies, so its shader values would have been dropped on
save.
A source is the one asset drawing rows from two graphs, so a name can arrive
twice. Its own row wins and the uniform keeps its default; nothing is rejected
on the shader's side, because the collision exists only at this one wearer.
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
Particle age and shader time each read performance.now() off their own
library, and the world got the frame's delta straight from the ticker. Three
clocks, so a global time scale would have been three multiplications and a
pause three separate freezes.
core/time.ts holds one clock instead: it accumulates dt x scale per frame
rather than reading the wall clock, and Editor.tick hands the very step it
took to the play session, the editor run and the animation preview. Delta
time, particle age, shader time and that preview are the same quantity now,
so the scale is a single multiplication and a pause is that scale at 0 —
nothing underneath needs rebasing, because the clock itself stands still.
The Math.min(dt, 0.1) caps in PlaySession and EditorRun are gone: the cap
(MAX_FRAME) now sits on the raw frame before scaling, and capping twice would
make the world run slower than the particles at scale 2.
A pause gates the scale rather than overwriting it — effectiveScale() answers
0 while paused, and for anything that is not a positive finite number, while
gameClock.scale keeps its value. A slider later survives a pause that way;
the issue asks for none yet.
The clock goes back to zero at both ends of a run, so a run is reproducible
from second 0 and the scene view looks freshly loaded after Stop. Resetting
only on Stop would not do it: the editor clock runs on afterwards, and the
next Play would start at "seconds since the last Stop".
The trap in that: ParticleField keeps its origin as an absolute second of
this clock, so after a reset it lies in the future and every particle would
age backwards. One line in sync() starts such a field over, which covers the
scene, the game and the tab preview at once — and fixes an older bug of the
same shape, where releasing a particleTime() freeze left the preview empty
for good.
Found while measuring that: ParticlePreview stood at second 0.5 by computing
the clock reading that would mean 0.5 since the field started. Over 200000
random origins the round trip misses the last bit in 18.8% of them and shows
one particle too few in 9.4%, because floor(0.5 * 20) comes out 9. The check
had been flaky since it was written. The panel hands the field the age itself
now (ParticleField.hold), and the faked clock is gone.
833 checks (824 + 9), 931 unit tests (921 + 10).
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
Behavior and Container draw an icon because isSymbolType() is true for them,
but that predicate does not mean "draws an icon" — it means "is editor
decoration". Four places read it that way: collectWorldItems, GameViewport.
collectFrame and syncDrawOrder all drop symbols out of the running world and
the game picture, and placementOf() gives them an upright unscaled box.
Listing 'particles' there would have handed the source an icon and taken away
its particles, in the scene view as well as in the game.
So the two questions are two functions now. hasSceneIcon() says a type draws
an icon; isSymbolType() keeps meaning decoration. The icon itself is a
SceneViewport decoration, which is editor-only for free because GameViewport
never syncs decorations.
A ring (r 10, #c26a1f) with four sparks, upright and unscaled like the other
symbols, its middle left open — unlike Behavior and Container a source draws
something of its own, and the field is densest exactly there. The name sits
beside it and a dashed line runs to the parent, same colour.
Found while writing the tests: the source's grab box scaled with its transform
while the icon did not, so the two came apart. placementOf() returns only the
translation for 'particles', making the box the upright 24 x 24 that covers
its icon. The source's own transform still feeds every particle untouched.
824 checks (821 + 3).
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
Speed and Prewarm are not state and not a second loop: both are arithmetic
on the clock argument the field already passes to every particle formula.
fieldTime = elapsed * timeScale + prewarmOffset, a pure rule next to
liveRange, called at the one place ParticleField.sync forms its time, so
preview and world inherit it together.
Prewarm offsets by one lifetime because that is the smallest offset which
fills a continuous emitter; a burst is dead at time >= lifetime, so the
same offset would skip it entirely and it is suppressed there.
The tab's slider counts wall-clock seconds, so its span divides by the
scale. A missing row falls back to 1 / off, so old project files need no
migration.
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
Three reports plus one found on the way.
Hold only froze the *picture*: the preview computed a fake second while drawing,
the library clock kept counting underneath, so letting go jumped to "how much
would have passed by now". That is the flip side of the formula model — a thing
that is a function of the clock is not stopped, its origin is moved.
ParticleField.rebase() does that; hold(null) calls it with the second stood at.
The Hold label now mirrors the preview's state instead of its own click history,
so dragging the slider (which holds too) reads `Run`, and Restart puts a held
preview back to 0.00 s rather than leaving it on the second it stopped at.
previewProps only read defaultsFor('particles'), so the panel showed the type's
defaults while the inspector showed the asset's rows. AssetBase.props is a full
bag on a graph asset as well — asset.props now lie over the defaults, the
asset's texture is resolved instead of always drawing a white square, and the
slider's span follows its lifetime. The span is re-read in tick(), because the
rows are edited in the inspector and the tab hears nothing about it.
The preview moves from under the graph to beside it, past a draggable splitter:
a graph is read across, so width is what it can spare and height is not.
AssetTabEditor grows a body() hook for that — the base class still stacks header,
strip and canvas, a subclass may put something next to the canvas.
Found by the full run, not reported: the graph canvas's empty-state hint ran
38 px past its frame now that the preview takes 280 px away. It is cut with
truncate() like any other label.
816 checks (809 + 7).
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
CI run 35 was red: the suite died after step 15 with `widget with text
"Container" not found`. Nothing in the editor broke — the tenth tab (#73) pushed
Container behind the `»` button at the test window's 1280 px, exactly the case
#84 was built for, and three steps still clicked the tab name directly.
openTab(t, tab) in tools/e2e/lib/scaffold.mjs asks tabRow() whether the tab is
hidden and goes through the menu when it is, so the fix lives in one place rather
than in every step that opens a tab. The LABELS record moves there as TAB_LABELS,
since both the helper and 14-overflow need it.
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
The asset type `particles` is placeable and carries a graph at the same time —
`behavior` was the blueprint. Because a continuous emitter gives birth to particle n
at time n/rate, the whole field is a function of the clock rather than of the frames:
no ring-buffer bookkeeping, exact time jumps, reproducibility as a measurable property.
compile.ts follows compileShader's frame but emits JS closures into a Float64Array
instead of GLSL, and without eval; a node with two consumers is evaluated once.
Drawing is one Pixi ParticleContainer per source, so one draw call.
Collision, wind and braking in flight are out for good — that is the price of the
formula model, not an omission.
The tab count goes from nine to ten, which is exactly the case #84 was built for one
day earlier: at 1280 px the row no longer holds every tab, so guard 14b now asks for
hidden.length > 0 instead of === 0.
Nine tabs need 631 px; at 1280x800 the centre column offers 666 px, so the tenth
tab would have spilled under the inspector - the same overflow CI caught in run 5.
TabStrip replaces the bare HStack: it fits the longest prefix that stays inside
the budget, always appends the active tab, and offers the rest behind a fixed
28 px button. The button's width is fixed on purpose - deriving it from the
number of hidden tabs would make width depend on the count and the count on the
width.
The rule itself is a pure function (tabRow.ts), so it is checked without a
browser. setActive() calls relayout() itself because Widget.resize only lays out
on a changed size, and switching tabs does not change any size.
Adding a tab now needs no space arithmetic - only a line in TAB_ORDER,
TAB_LABELS and panes, all three Record<CentreTab, ...>, so forgetting one is a
type error.
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
The default of the Edge param and the address mode the shared sheet physically
carries were the same constant; changing the value would have turned every
sentinel with it and given each shader sprite a full copy of its texture.
SHEET_EDGE ('mirror', what TextureLibrary uploads) is now separate from
DEFAULT_EDGE ('clamp'). A graph whose Sample reads nothing but its own pixel
draws with the plain sheet whatever the Edge says, so the common shader costs
no second copy.
Without a shader the quad's coordinates never leave 0..1, and mirror-repeat
reads like clamp within a texel - so clamp is what a sprite shows anyway.
The twin of the font picker fixed earlier today: every tile was a Graphics
carrying its sprite and caption, which Pixi v8 answers with "addChild:
Only Containers will be allowed to add children". The background moves
into its own Graphics inside a Container, and the step watches the console
while the picker opens, as the font one does.
Editor suite: 784 checks.
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
Only the picture was masked, so the checkerboard, the frame outlines, the
handles and the name plates were drawn over the panel next door once the
sheet was zoomed past the tab. The dark block in the report is the
checkerboard's base: checker.ts fills the whole image rect and clips only
the light squares to the widget.
Everything that pans and zooms now sits in one masked container, the
pattern WorldViewport and AnimationCanvas already use. A check samples
pixels outside the tab and names the frames drawn past it; a guard in
front of it asserts that zooming really pushes the sheet over every edge,
or the pixel probes would measure nothing and stay green forever.
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
game_maker_serve runs project-shells.mjs unconditionally, so running the CI
smoke runner on a development machine overwrote the four project documents
with empty shells: revision 1301 became 1, and the name became the key from
PROJECTS, because the seeders keep whatever name the server already holds.
"Jump and Run" came back as "jumpRun". The shells are only ever needed on a
fresh checkout, where the directory is empty, so an existing file is kept.
An upload sends its file name next to the raw bytes, and the server keeps
it in a sidecar next to the content-addressed file. Both pickers caption
every tile and row with it, and an asset made there is named after the
file instead of "Texture" / "Font". Last upload of the same content wins.
The API's own set_error_handler ignores error_reporting(), so @-silenced
warnings still throw: a missing sidecar took the whole listing down with a
500. Existence is checked instead of suppressed.
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
A font asset holds a file and nothing else, the twin of a texture: the server keeps it
content-addressed under data/fonts/{sha256}.{ext}, with the format read from the file's own
four-byte signature (finfo reports fonts inconsistently across libmagic versions). A text
wears one through its ordinary Font property, so overrides, reset, undo and the Properties
node come for free; no font means the editor's own typeface.
The picker lists everything the server holds and renders each row in the face it offers.
The family name is gm-font-<hash16>, never the name inside the file, so two "Regular" cannot
collide. WorldViewport.syncText is the single place that draws it, which covers scene, game
preview and play at once.
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
shaderFingerprint(graph) covers node id/type/params/ports and edge endpoints only;
x/y, collapsed, folded and edge ids stay out. ShaderLibrary keys on it and counts
compiles (__gm.shaderCompiles()). Measured before: one compile per preview step of a
node drag (12 for a harness drag); after: 0, a param change exactly +1.
Co-Authored-By: Claude Fable 5.1 <noreply@anthropic.com>
Four new rows on sprite, text, collider and container (block TRANSFORM):
scale, rotation in degrees clockwise, mirrorX, mirrorY. As properties they
get override/reset/apply, loading of old projects, write-back after play and
the Properties node for free; camera and behavior have none.
The hierarchy composes T*R*S per level (composeAlongChain replaces
sumAlongChain), so children rotate and scale with their parent. Reparenting
and grouping keep the look (carriedTransform). Drawing goes through
placeNode, the gizmo is a polygon, cull and objectRect use the AABB, drags
are computed in the parent's system.
Colliders are oriented boxes: SAT for box/box, box-circle in the box frame;
exitDistance replaces axisSeparation/axisCorrection, moveAndSlide moves along
the object's own axes.
Co-Authored-By: Claude Fable 5.1 <noreply@anthropic.com>
Fragment-side coordinate nodes instead of vertex nodes: the quad stays the
quad, a UV read plus a sample at a computed coordinate covers flip, scroll,
wave, pixelate and scanlines. Time is a uniform only when a Time node reaches
the Output; a viewport that drew a Time shader redraws from the ticker so the
Scene tab animates without a running world. Edge (Mirror/Repeat/Clamp) is a
second texture variant in TextureLibrary because WebGL binds no TextureStyle
resource of the shader. The compiler now emits #version 300 es first: Pixi
only compiles as ES 3.00 when the fragment says so, and textureSize needs it.
Co-Authored-By: Claude Fable 5.1 <noreply@anthropic.com>
A sprite's picture is now a Mesh (unit quad, sibling of its Graphics node, which keeps
only the hit area); a worn shader replaces Pixi's fragment in that draw, so there is no
intermediate texture and no extra render pass. Measured on the HD 630: 400 shaded
sprites hold 60 fps (was 34), 800 hold 56 (was 20).
Two Pixi facts the code leans on: a mesh's texture is bound only for Pixi's own shader,
so GraphShader.wear hands it over; and MeshPipe caches whether a mesh batches and
re-checks it only in a frame without structure changes, so switching a shader on or
off calls mesh.unload().
The console panel mirrors console.group/groupCollapsed/groupEnd and fills the %s %d
%o %c directives, so Pixi's deprecation warning shows its head, not only its stack.
E2E 12 guards against the addChild-on-Graphics warning, 28 counts shaders instead of
filters.
Co-Authored-By: Claude Fable 5.1 <noreply@anthropic.com>
The wiki carried an estimate ("fine for dozens, not for thousands"). Measured
on the Intel HD 630 that CI uses, 48x48 sprites in a 640x360 camera, neutral
values, three runs agreeing to 1 fps:
sprites 25 50 100 200 400 800
fps 58 56 54 48 34 20
The same scene without shaders holds 60 fps at every one of those counts, 800
included. Quadrupling the sprite area (96x96) measures the same, so the cost is
the render target switch, not the pixels: roughly 20 us per pass up to 200,
40 us at 800.
tools/perf-shaders.mjs drives it (not run in CI, frame times are machine
dependent). New hook __gm.filterCount() counts visible nodes carrying a filter
and proves one pass per sprite; e2e 28 checks it.
Two traps the tool guards against, both cost a wrong answer first: the median
frame time is useless here (the distribution is bimodal under vsync, so the
rate comes from frames/duration), and --disable-gpu-vsync has no effect in
headless, so what is measured is the point where the frame rate breaks down.
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
The + Property menu of the Properties node offered every shader's params
for every sprite. Each shader row now carries its shader name, and a name
shared by two shaders lists both: "brightness (Adjust colors, Neon glow)".
Sprite-owned rows stay unlabelled.
The note hangs off a map keyed by the def object, not by the name -- a
sprite property and a shader param may share a name (#63), and keying by
name would label the wrong row.
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
A frame drawn straight from the sheet showed a hairline of the neighbouring
cell along any edge that fell inside a screen pixel: with antialias on, a
partly covered pixel is still evaluated at its centre, past the edge. On top
of that Pixi rewrites a Graphics fill texture from clamp-to-edge to repeat at
draw time (generateTextureFillMatrix.mjs), so the top row of a sheet read its
bottom row.
TextureLibrary.get(ref) now cuts the rectangle out of the loaded sheet with an
OffscreenCanvas on first use and uploads the cut (key file|x,y,w,h, kept for
the session). Address mode is mirror-repeat: Pixi only rewrites clamp-to-edge,
and within a texel of the border mirror behaves like clamp, for linear as well
as nearest. Loaded sheets get it too, since whole pictures wrapped at their own
borders the same way. viewport/textureFill.ts and its test are gone.
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
Dropdown labels are now Linear (default) and Nearest; the stored values
linear/nearest are unchanged, old project files load as before.
e2e 12c-ii measures in Play at camera zoom 1.37 (screen scale 1.434): a
Nearest edge sampled across seven pixels is byte-identical with and without
a neutral Adjust colors shader, and brightness 0.5 on the same path darkens,
so the pass really runs there. New hook __gm.gameRect(id).
Co-Authored-By: Claude Fable 5.1 <noreply@anthropic.com>
The check compared the position after key-up with a sample taken before
shot(); the player keeps walking during the screenshot, so the check
measured screenshot duration on the runner (22/30/40 px on CI runs 11-13)
and failed at exactly 40.
Co-Authored-By: Claude Fable 5.1 <noreply@anthropic.com>
No input, one Value param (step 0.05, drawn on the node), output `value`
as a float literal via floatLiteral (2 -> 2.0, NaN -> 0.0). No uniform,
no sprite row - that is the difference to Property.
The e2e negative check for "no behavior node in the palette" now uses
Boolean as its marker, and step 28 types the palette search first
because the palette scrolls from twelve entries on.
Co-Authored-By: Claude Fable 5.1 <noreply@anthropic.com>
One rule for every asset type: a click on an asset row selects it, a
double-click (or Enter, or creating it via +) opens its tab. Selection
alone still switches tabs only for nodes, frames and template objects.
- state.openAsset(id) = select + 'open' event; the editor maps the asset
type to its tab via TAB_OF_ASSET. The two special clauses for state
machine and shader assets in the selection handler are gone.
- Creating via + and importing a texture from the picker open the tab;
paste/drop of an image only selects.
- 3 unit tests (event order, re-open of a selected asset, selection never
fires open), 14 e2e checks in step 4.
Co-Authored-By: Claude Fable 5.1 <noreply@anthropic.com>
Output gains a number input `alpha`; unconnected it reads the texel's
alpha, like `color` reads the texel. The epilogue premultiplies with the
resolved alpha. New `Texture alpha` node exposes texel.a for maths.
PortDef.inline=false keeps the alpha port without an inline field: every
number port is inline by default, and a typed default of 0 would have made
every shaded sprite invisible. The compiler's texel fallback is typed:
colour ports get rgb, number ports get texel.a.
Co-Authored-By: Claude Fable 5.1 <noreply@anthropic.com>
check() appended the detail by string concatenation, so an object
argument showed up as "[object Object]" in the log (27-console.mjs).
Co-Authored-By: Claude Fable 5.1 <noreply@anthropic.com>
adminandClaude Opus 5