e1d3c0cadb058bf0a9e2a58d66c67a8bccc0c072
297
Commits
| Author | SHA1 | Message | Date | |
|---|---|---|---|---|
  adminandClaude Opus 5.5
|
e1d3c0cadb |
Keep items a running game puts into a typed list
A typed global list lost the items the game had added to it. The item showed up in the inspector for a moment and then was gone again. - Since #254 the project hands out a typed list as a fresh copy each time, with the `$struct` marks stripped. - While a game runs, every change to the project runs `adoptDeclarations`. It took a declared value over when it differed from the last one it had seen, compared with `!==`. - The fresh copy never equals the last one by identity. So the empty list from the project overwrote the live list on every project change, for example when the game writes something back to the scene. - The comparison now uses `sameValue`. A real edit to the variable during a run still reaches the game. Tests: - ./check.sh: CHECK EXIT 0 - New unit test in scope.test.ts, red without the fix. - e2e 55i: a graph appends to a typed global list, then another asset changes during the run. With the fix {"filled":2,"afterEdit":2}, without it afterEdit is 1 and the check fails. - GM_STEPS=1,55: ALL PASSED, 26 checks. Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> |
||
|
adminandClaude Opus 5.5
|
b0d0868f55 |
Give a list one struct type so every item keeps its shape (#254)
A list of structs used to let every item carry its own fields. Adding an item meant typing the same fields again, and nothing kept the items in step with the struct asset from #253. A list can now name a struct type for its items, and the asset keeps them in shape. - A list variable and a list field get the row Items with Mixed, every struct asset and Make struct type. Make struct type collects every field any item has, so no item loses a field. - A typed item carries its type under the key `$struct` (ITEM_TYPE_KEY). listItems does not count it as a field. - A list that holds anything but structs refuses a type, also when the offending item sits in an override. The console names the list and the count, and the list stays as it was. - In a typed list `+ Item` adds an item with the defaults, without the kind menu. Field names are locked, values stay editable. - The rows of a typed item take their kind from the struct asset (declaredKind in InlineList.ts). An asset field shows the asset picker instead of a text field, as reported in the issue. - A struct item in a mixed list gets its own Type row. Switching a list back to Mixed keeps the type on each item. - syncStructTypes brings marked items into shape and carries renames into them, also inside overrides and nested lists. One undo step. - The delete dialog of a struct asset also counts typed lists. - The game never sees the key. World and sharedState strip it with withoutItemTypes and bagWithoutItemTypes, so a struct stays a plain object at runtime. - Add item and Set item get the setting Type. With a type they only accept a struct with exactly its field names (fitsType in SetItem.ts). Anything else is left out and logged. - The item indent from #252 is back to its old width, the narrow one squeezed the value fields. Not done: writing a variable does not check the type, and the List node offers no type. Found on the way: a test helper in list-of-structs.test.ts called nodes without params. It now passes the same arguments as the interpreter. Tests: - ./check.sh: 183 files, 2679 tests, CHECK EXIT 0 - e2e GM_STEPS=1,21,22,32,54,55: ALL PASSED, 150 checks - e2e GM_STEPS=1-6,21,22,32,54,55 before the follow-up: 404 checks - New: tests/core/typed-lists.test.ts, e2e module 55 with 13 checks - Counter-checks bite in unit and browser, originals restored by cmp Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> |
||
|
adminandClaude Opus 5.5
|
61bbb96a96 |
Define a struct once as an asset and reuse its shape (#253)
A struct used to declare its fields wherever it stood. The same shape in two variables meant typing it twice, and Pack/Expand copied it once without staying in sync. A Struct asset now holds the shape in one place, and every struct that picks it as its type follows it. - New asset type "Struct" (not placeable, group Structs, own icon). The inspector shows its fields with name, kind and default value, and "Open" shows them in the variables tab. - Struct variables and struct fields get a Type row: own fields, any Struct asset, or "Make struct type". With a type the fields come from the asset and cannot be added, renamed or removed there. The values stay per variable, overrides on placed objects still work. - Pack and Expand get the setting Type. With a type their ports are the fields of the asset and read-only in the inspector. - A change to the asset reaches every typed place in one undo step (syncStructTypes). A new field arrives with its default. A removed field goes along with its port, edge and typed value. A renamed field keeps its value in variables, overrides and on ports with edges, also through nested types. - Undo for these edits records plain assignments (Recorder), because the reach of a change is not known in advance. - Cycles such as Loot in Loot, also through another type, are refused and not offered in the picker. - Deleting the asset names how many places use it. Afterwards each place keeps its fields as its own. - Loading reshapes a stale copy in a project file to its type. - "Make struct type" creates an asset from an existing struct and links the place to it. Differs from the plan: - A changed default value applies to new fields and newly typed places only. Existing values stay. - Removing a single field shows no warning. Undo brings it back. Typed lists are left for #254. Lists stay dynamic for now. Found by e2e: after deleting or renaming the type the inspector did not rebuild and kept showing the old name. Fixed, the check was red before. Tests: - ./check.sh: 182 files, 2661 tests, CHECK EXIT 0 - GM_STEPS=1,4,21,22,54: ALL PASSED, 176 checks - 14 unit tests in tests/core/struct-types.test.ts - New e2e module 54 with 14 checks, real mouse. Module 04 counts 23 asset types. - Counter-probes: without the rename pass 4 unit tests fail, without reshaping values 8, without the cycle rule 1. In the browser, without spreading changes and with + Field despite a type, 3 checks fail. Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> |
||
|
adminandClaude Opus 5.5
|
4857bb75e6 |
Show lists in the inspector and variables in their own tab (#252)
The List tab could show one list at a time and was the only place to see its items. A list now shows its items right where it lives, and a new Variables tab shows all variables of an asset or placed object. - InlineList draws the items of a list under its row in the inspector, in struct fields and in the Variables tab. A list inside a list or a struct field is drawn the same way, one step indented. - The index column is the indent. Items sit under their list without an own margin, and the index column is 16 px wide instead of 28 px. - Above 20 items (INLINE_LIMIT) the rest collapses into "... N more - open in tab". During a run the rows show the values from the game. - ListHead puts "N items" and "+ Item" in one row. "N items" opens the list in a tab. A separate Open button squeezed the counter to zero width in the narrow inspector column. - VariablesEditor shows every variable of a behavior asset, a variables asset or a placed behavior. On an asset it edits the declarations. On a placed object an edit only overrides that object, with the usual reset and push buttons. - Opening a list inside a tab adds a new tab and keeps the open one. valuesKey gives each list its own document, so a list that is already open is shown instead of opened twice. - Titles read "Pickup · Variables" or "Listy · nums · [3]". The tab closes when its asset or object is deleted. - Lists on node inputs stay inline only, a node owns no variables. - The List tab, ListEditor and the __gm.list hook are gone. Tests: - ./check.sh: 181 files, 2645 tests, CHECK EXIT 0 - GM_STEPS=1,21,22,32: ALL PASSED, 123 checks - e2e 21 is rewritten for inline lists and the new tab, 22 and 32 are adapted. Sum in README: 1486 (+6 in 21, -1 in 22), counted by hand. - Counter-probes fail as expected: sub-lists not told apart (1 unit test), sub-list replacing the open tab, all items drawn inline (60 rows instead of 20), no live values (0 rows at 24 items in a run). Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> |
||
|
adminandClaude Opus 5.5
|
92fad6b9e3 |
Show the list a running game fills in the list tab (#251)
While playing, the inspector said "2 items" for a list a graph had filled, but clicking it opened an empty list tab. The inspector reads a Variables asset from the running game, the list tab only read the list stored in the project. It did not follow the run's ticks either. - resolveList takes the live values. For a Variables asset it uses the running game's value while one runs, the project's otherwise. This is the inspector's rule. - ListEditor refreshes on runtime ticks about 10 times a second, and not while a field in the tab is being typed in, like the inspector. - Editor hands the list editor the inspector's liveVariables. - __gm.list.info() also returns rows, the rows the last build drew. - Editing in the tab while playing goes into the run's copy of the project, as in the inspector. A very long, growing list rebuilds all rows up to 10 times a second. Tests: - ./check.sh: 180 files, 2634 tests, CHECK EXIT 0 - e2e GM_STEPS=1,32: ALL PASSED, 30 checks - e2e 32b-ii, 2 checks: a graph adds an item every frame, the test pauses and clicks "N items" with a real mouse. The tab draws 26 rows for 26 items, grows to 50 after resuming and is empty after Stop. - Counter-checks: without live values the tab draws 0 rows for 23 items, and without the refresh it stays at 23 - README: 1481 editor checks, counted by hand Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> |
||
|
adminandClaude Opus 5.5
|
cb8a2d029a |
Loop over a list and stop at the first match with For each (#249)
Finding the first item that matches took Count, Repeat, Item at and a Branch, and the loop could not stop once it had found something. A graph has no lambdas, so the predicate is an input that is read every round. - For each runs body once per element, with item and index set, and goes on at done. - Its break input is read anew before every round, after item is set. Once it is true the loop ends there and that round's body does not run. - done sees the matching item and index with stopped true. Without a match it sees no item, index -1 and stopped false, the OrDefault. - RepeatResult has optional items, stopWhen, stopped and exhausted. GraphInterpreter.loop reads them, Repeat runs as before. Tests: - ./check.sh: 180 files, 2623 tests, CHECK EXIT 0 - e2e GM_STEPS=1-6: ALL PASSED, 269 checks - 5 interpreter tests in graph.test.ts, 2 catalog cases - e2e 6z-iv: the palette creates the node, and a search for Name == "Gold" in Axe, Gold, Bow, Gold logs "1true" - Counter-checks: without the break check 2 unit tests fail, and with break not read over its edge 6z-iv fails - This commit alone: tsc and the three touched unit files pass (349 tests) Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> |
||
|
adminandClaude Opus 5.5
|
a5ae21481b |
Type point values, snap and scrub the preview in the curve tab (#248)
Building a curve by mouse alone was fiddly: there was no way to put a point on an exact value, no grid, and the running preview could not be stopped at a chosen moment. The hand cursor over points also looked like a link instead of a drawing tool. - Number fields t and v in the header show the selected point. Typing or dragging on them goes through the same rules as a mouse drag, so points never overtake and handles stay clamped. One undo step each. t is greyed out on the two end points. - The magnet button from Vector art snaps points and handles to a 0.05 grid in t and v, when placing on free space and when dragging. - Points and handles keep the default arrow in the curve tab and in Vector art. The pixel art palette dropped pointer as well, which is beyond the issue. Collider corners never had it. - The preview now starts off. A vertical time line with a knob under the t axis sets t when dragged sideways. Dragging the dot on the rail jumps to the first t where the curve reaches that value, or to the closest one if it never does. - The rules are pure functions in curveView.ts (withCurvePointSet, snappedToGrid, shareAtValue, previewSecondsAt), the canvas only calls them. Tests: - ./check.sh: 180 files, 2616 tests, CHECK EXIT 0 - GM_STEPS=1,47,53: ALL PASSED, 87 checks - 4 new unit tests in curve-view.test.ts, 4 new e2e checks in 53 (53h-53k) and 1 in 47, all with real mouse and keyboard - Counter-probes bite: without "first t" 1 unit test fails, with pointer, no snap, no field commit, no scrub or preview on 5 browser checks fail, pointer in Vector art fails the new 47 check Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> |
||
|
adminandClaude Opus 5.5
|
393b8ec7f9 |
Build your own easing curve and use it on keys and Lerp (#247)
The built-in eases cover the usual shapes, but a game often wants its own: a coin that bounces twice, a door that overshoots and settles. A new asset type holds such a curve, and keys and the Lerp node can pick it instead of a built-in ease. - New asset type "curve": points like in Vector art, x is t and y is the value. A new curve is the straight line from (0, 0) to (1, 1). - One pure evaluation in src/core/model/curve.ts serves the timeline preview, the running game and the Lerp node. - The curve always has one value per t. The end points stay at t 0 and 1, points cannot pass each other, and a handle that reaches past its neighbour is shortened along its direction. Loading a hand-edited file applies the same rules. - Curve tab: click on the line to insert a point that keeps the shape, click on free space to put one there, drag points and handles, double-click or Delete removes, Alt-click toggles round and sharp. Every step is one undo step. - Presets: all 30 built-in eases plus Linear, fitted with adaptive subdivision. Each stays within 0.4 % of the built-in ease. - Preview: a dot runs along the curve once a second, a second dot shows only the value. The Preview button stops it. - Animation keys get "Curve" under Easing with a curve picker. Lerp gets "Curve" under Ease, and its result may overshoot b. - A missing or unpicked curve runs linear. The inspector says so, the node shows it as a problem, and deleting a used curve warns with the number of keys and Lerp nodes. Tests: - ./check.sh: 180 files, 2612 tests, CHECK EXIT 0 - GM_STEPS=1-6,25,53: ALL PASSED, 309 checks - New e2e module 53 with 13 checks, all with the real mouse. Expected values come from its own Bezier evaluation. - Counter-checks bite: without Bezier evaluation 4 unit tests fail, without handle clamping 2. In the browser, a key that cannot find its curve, a click that sets no point and a handle drag that moves the point all turn checks red. Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> |
||
|
adminandClaude Opus 5.5
|
320d3e27e1 |
Add a Lerp node that blends from a to b with an ease (#246)
Every animation in a behavior had to build its interpolation from Subtract, Multiply and Add, once per axis. The gold pickup in "Garden of Sacrifices" needed about 30 nodes for that alone. A single Lerp node with an ease makes those chains one node each. - Lerp has the inputs a (default 0), b (1) and t (0) and the output result. It sits in the data category next to Clamp. - The Ease setting offers Linear, In, Out and In-out, all quadratic. The node row shows it as "Ease: Out". - t is held in 0..1. A timer that overshoots in the last frame still lands exactly on b. Tests: - ./check.sh: 178 files, 2583 tests, CHECK EXIT 0 - 7 new cases in the node catalog test. Without the clamp on t, 2 of them fail. - e2e 6z-iii (2 checks): typing "lerp" in the palette adds a linear Lerp, and picking "Out" in the inspector reaches the node and its row. GM_STEPS=1-6: ALL PASSED, 267 checks. - README check sum is 1459, computed, not counted. Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> |
||
|
adminandClaude Opus 5.5
|
30de4d35a8 |
Give the scene tab a header with Fit and the eye (#245)
The scene view had no header bar of its own, and its eye sat in the top bar. Switching between Scene and Game also showed two different pictures, since nothing tied the free view to the camera. - Theme.headerPadding (4) replaces Theme.padding in the top bar and in TabHeader, for the padding and for minHeight. Both bars shrink from 40 to 32 px. Nothing else uses the new value. - The new ScenePane wraps the scene view in a header bar with Fit and the visibility eye. The eye is gone from the top bar, which keeps the menu, undo and redo. - Fit with an active camera shows the world exactly as the Game tab does at its chosen step: the same zoom, and the camera centre on the same screen pixel. The rule is the pure freeViewOfCamera in viewport/view.ts, which also mirrors the letterbox snapping. - Fit without a camera frames all content on a whole step, as before. - New hook __gm.sceneHeaderAt(name). e2e 46g opens the eye there. - The doc comment above Theme.treeIndent went away in the working tree along with this. It is committed as found. Not checked: the two views only match while they have the same size. With the tilemap panel open the scene view is narrower, and Auto may pick a smaller step there. Tests: - ./check.sh: 178 files, 2575 tests, CHECK EXIT 0 - 2 new unit tests in view.test.ts: three cameras times four steps land on the same screen point as in the Game tab, Auto stays whole - e2e 3h (2 checks): a real click on Fit at Auto and at Fit, crate, camera frame and view box match in both tabs - GM_STEPS=1-3,46: ALL PASSED, 94 checks - Counter-probes: without the centre offset the unit test fails, with Fit ignoring the camera both 3h checks fail Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> |
||
|
adminandClaude Opus 5.5
|
a90ef4c22f |
Draw the game view letterbox in the editor background colour
The bars around the camera frame in the Game tab were pure black. They now take Theme.colors.background, so the tab blends in with the rest of the editor instead of framing the game in a black box. - GameViewport drops LETTERBOX_COLOR and uses the theme colour for both the letterbox and the model frame. - e2e 3f checked "the crate is drawn, not letterbox" against #000000. With the new colour that would pass whatever is drawn, so it now compares against #1b1d22. Tests: - ./check.sh: 178 files, 2575 tests, CHECK EXIT 0 - GM_STEPS=1-3,46: ALL PASSED, 94 checks (3f reads #e0553f) Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> |
||
|
adminandClaude Opus 5.5
|
e0b471c354 |
Open the add menu with a right-click in the asset panel (#244)
New assets could only be added through the + button. A right-click on a category heading or on the empty space below the rows now opens the same menu at the pointer. - ListView gets the callback onListMenu. It fires on a right-click on empty space or on a heading. Only the asset panel has headings, so other lists are not affected. - AssetPanel opens its + menu from there. - A right-click on a heading does not fold or unfold the category. A right-click on empty space clears the selection like a left-click. - A right-click on an asset still opens the menu of that asset. - The empty list now says "No assets - press + or right-click". Tests: - ./check.sh: 178 files, 2573 tests, CHECK EXIT 0 - e2e 1-4: ALL PASSED, 134 checks - 3 new checks in e2e 04 with real right-clicks: menu on the "Scenes" heading (21 types, heading stays folded), menu on empty space, and "Behavior" from that menu creates one, undone again. - Counter-probe: without the menu both right-click checks fail. Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> |
||
|
adminandClaude Opus 5.5
|
38f009e035 |
Make e2e 40, 46, 51 and 52 pass in the full run again
The suite job failed on every push since
|
||
|
adminandClaude Opus 5.5
|
3abb6894a7 |
Let a container sort its content with its parent (#243)
A container is not drawn, so it had no place in the draw order. The chain from its content to the parent of the container broke there, and a container under a character could not be drawn together with it. - A container gets the switch Sort with parent under Z. It defaults to off, also for new containers, so projects draw as they did. - With the switch on, the whole content is drawn in the slot of the container's parent. The content's own switch does not count there. - Containers in a row pass the content on as long as each has the switch on. On the top level or under a tilemap it has no effect. - drawSlots follows the new sortsWith field of a draw item. Scene view, game and picking all use drawSlots, so all three agree. Found on the way: a scene object hung directly under a container spells the container out, and its template content is dropped. That is the existing spelledOut rule, the tests now keep both cases apart. Tests: - ./check.sh: 178 files, 2573 tests, CHECK EXIT 0 - 7 new unit tests in sort-with-parent.test.ts: the switch, template content, override per container, a chain, top level and tilemap, game and picking - e2e 5b-iii: a real click on the switch in the inspector, with undo - 4 counter-probes over #242 and #243 bite (2 unit, 2 browser) Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> |
||
|
adminandClaude Opus 5.5
|
074bda2247 |
Give texts, tilemaps, particles and containers the turn knob (#242)
The knob on its stem turned and scaled only sprites and colliders. Every other type with Scale and Rotation had to be typed into the inspector. - Text, tilemap and particle source get the knob above their box. Edge and corner grips stay with sprite and collider, the only types with a width and a height of their own. - A container gets a thin frame round all of its content, turned and scaled with it, and the knob sits above that frame. It turns and scales round the container's origin, so the content swings with it. A container with no content gets the knob above its symbol. - contentFrame in sizeGizmo.ts is the pure rule for that frame. sizeGizmoEditor.ts wires it in. - One pull is one undo step, as for sprites. Not clicked in the browser: scaling (as opposed to turning) of a container by the knob. Only the shared code path covers it. Tests: - ./check.sh: 178 files, 2573 tests, CHECK EXIT 0 - 2 new unit tests for contentFrame - e2e 29k, 4 checks: knob on text, tilemap and particles, frame round the container's content, a real pull turns the container by 20.9 degrees round its origin with the content on the computed pixel, one undo takes it back - 4 counter-probes over #242 and #243 bite (2 unit, 2 browser) Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> |
||
|
adminandClaude Opus 5.5
|
98b9b300d9 |
Zoom the scene view further in, up to 64 device pixels
The scene view stopped at 24 device pixels per world pixel, which is too little to work on single texels of small pixel art. - FREE_ZOOM_STEPS gains the steps 32, 48 and 64. All of them are whole numbers, so every texel keeps the same width on screen. - The tile editor takes the same steps, so its fit can now land above 24 on a small board. - The unit test and the step list in e2e 39 follow the new top step. Tests: - ./check.sh: 178 files, 2573 tests, CHECK EXIT 0 Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> |
||
|
adminandClaude Opus 5.5
|
2eeabf7c23 |
Drag a whole selection and join existing groups in the hierarchy (#241)
Three follow-ups to the hierarchy groups. Dragging a row that belonged to a multi-selection moved only that one row. The group dialog could only create a new group. The group row drew its folder in front of the label, unlike every other row in the hierarchy. - Dragging a selected row moves every selected object. This holds for reordering, dropping into a group or between its members, dragging out of a group and dropping onto an object as new parent. - The moved objects land side by side in hierarchy order, whichever row was grabbed. The whole move is one undo step. - A selected child of a selected object travels with its parent, not on its own. Dropping the selection onto its own rows does nothing. - Dragging a row that is not selected still moves only that row. - hierarchyDrop.moveObjects replaces the single-object rule. One object is the case with one element, so the old drop tests hold unchanged. - The group dialog has a "Group" dropdown: New group or an existing group. Picking a group greys out the name and turns the button into "Add". A group that holds all chosen objects already is not offered. - Rename keeps using the dialog without the dropdown. - ListRow draws an end icon at the very right and the hint left of it. Only the hierarchy uses iconAtEnd, so other lists do not change. - New test hook __gm.hierarchyHint() gives the centre of a row's hint. Not clicked in the browser: dragging a selection in the container tab and onto an object as parent. Only the unit tests cover these. Tests: - ./check.sh: 178 files, 2564 tests, CHECK EXIT 0 - e2e 1 + 52: ALL PASSED, 27 checks - 7 new unit tests in hierarchy-drop.test.ts, 4 new e2e checks in 52i and 52j with real clicks and a real drag - 4 counter-probes bite: drop rule ignores the selection (5 unit tests fail), icon column not kept free, dialog ignores the picked group, panel ignores the selection (only o2 lands in the group) Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> |
||
|
adminandClaude Opus 5.5
|
893b81f798 |
Select a range of rows with shift-click in the hierarchy (#241)
Ctrl- and shift-click only added single rows to the selection. With many objects spread over the hierarchy, picking a run of them meant clicking each one. Shift-click now selects everything between the anchor and the clicked row, as in a file explorer. - The anchor is the row last clicked without shift, plain or with ctrl. A second shift-click redraws the range from the same anchor. - Ctrl+shift-click adds the range to the current selection instead of replacing it. - A collapsed group inside the range brings all its members. Children hidden under a collapsed parent stay out, since they are not shown. - Without an anchor from the hierarchy, the primary object picked in the scene view serves as anchor. With no selection at all, shift-click adds the single row as before. - The range rule is a pure function in hierarchyRange.ts, so it is tested without a browser. HierarchyPanel keeps the anchor. Not checked in the browser: ctrl+shift-click and the anchor taken from the scene view. Only the code path covers them. Tests: - ./check.sh: 178 files, 2557 tests, CHECK EXIT 0 - e2e 1 + 52: ALL PASSED, 23 checks - 5 new unit tests in tests/editor/hierarchy-range.test.ts - New e2e check 52h with real clicks - Counter-check: without the range, 52h fails with ["o2","o5"] Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> |
||
|
adminandClaude Opus 5.5
|
53fa63441b |
Group scene objects in the hierarchy, for the editor only (#241)
A scene with a hundred crates fills the hierarchy with a hundred rows. Groups bundle top-level objects under one folder row that folds away. They exist for the editor only. Parenting, positions and the game do not see them. - Model: a scene or container template holds a list of groups, an object may carry a groupId. Old projects load unchanged. Loading drops empty groups and members that are no longer top level. - Only top-level objects can join a group. Parenting a member takes it out of the group, and Undo puts it back. There are no groups in groups. - Order: treeOrder lists the members together, where the first one stands. The same order decides drawing at equal z, in the editor and in the game, so the hierarchy and the picture cannot disagree. The stored object list stays untouched when grouping. - Hierarchy: a group row shows a folder icon, the name and the member count. Clicking it selects all members and keeps it folded. Selecting a single member elsewhere unfolds it. Folding lasts for the session. - Create with "Group..." in the object menu. A name dialog asks first, so creating is one Undo step and Cancel creates nothing. - The group menu has Select members, Rename... and Ungroup. The object menu adds "Remove from group". - Drag and drop: onto the group row appends, into a gap between members inserts there, next to a row outside leaves the group. Dragging the group row moves all members as a block. The drop rules live in hierarchyDrop.ts as a pure function. - Copy and paste keeps a top-level copy in the group of its original. A container built from group members takes their place in the group. - Clicking an object that is already selected together with others now keeps only that object selected. ListView narrows the selection on release, so a drag starting on such a row keeps the selection. Not checked in the browser: groups in the container tab, "Remove from group", Ctrl-click on a group row and a drag out of a multi-selection. The code path covers them. Tests: - check.sh: 177 files, 2552 tests, CHECK EXIT 0 - e2e 1, 51, 52: ALL PASSED, 31 checks (new module 52) - 19 new unit tests in object-groups.test.ts and hierarchy-drop.test.ts - 9 counter-probes, all fail as expected (7 unit, 2 in the browser) Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> |
||
|
adminandClaude Opus 5.5
|
2b89292eb4 |
Copy and paste scene objects and graph nodes (#240)
Copy and paste only existed for animation keys. Building a scene or a graph meant placing every object and node again by hand, even when the same arrangement was needed twice. - Ctrl+C copies the selected objects with their whole subtree, or the selected nodes with their links, groups and comments. Ctrl+V pastes into the scene, container or graph of the visible tab. - The copy is a snapshot in the editor's own clipboard, in memory. It holds asset ids, so the system clipboard is not used. It is cleared when another project opens. - A paste lands under the mouse pointer when it is over the view, and keeps its arrangement. Otherwise it lands one grid step beside the original. Each further copy that still exists moves one step on, so an undone copy does not count. - Objects get new ids for the whole subtree. They paste into the one selected object and keep their look under the new parent. If that object is the original or an earlier copy, the paste lands beside it instead of nesting deeper with every Ctrl+V. - A placed container stays a container. Content copied out of a container pastes as plain objects. Pasting a container into its own template is refused. - Nodes paste only where the palette would offer them. A second Start or End, a State in a behavior or a behavior calling itself is left out, and a notice names what was dropped. - Menus: Copy and Paste in the object menu, a new Paste menu on empty scene space, Copy in the node and box menus, Paste in the palette. - Ctrl+V still imports a picture from the system clipboard when the copy does not fit the tab. While objects are copied, the scene and container tabs use Ctrl+V for them, as the timeline does for keys. Not checked in the browser: paste in the container tab, in state machine, shader and particle graphs, and from the hierarchy menu. The shared code path covers them. Tests: - ./check.sh: 175 files, 2531 tests, CHECK EXIT 0 - e2e 51 (new): ALL PASSED, 11 checks with real keys and clicks - 13 unit tests in tests/editor/clipboard.test.ts, one of them pins the grid step after undo found during e2e - 7 counter-checks all fail as expected (6 unit, 1 in the browser) Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> |
||
|
adminandClaude Opus 5.5
|
7e829f737e |
Load every picture of a project ahead so animated tiles don't flicker
A texture was fetched only when it was drawn for the first time. Until the file arrived, the tilemap skipped the cell for that frame. An animated tile whose next step sat in another picture therefore blinked away once on its first cycle, and sprite animations did the same. - FileLibrary gets preload(files). It requests every file that is not held, loading or known to have failed. Each library reports what it holds through holds(). - src/core/model/projectFiles.ts lists the files a project names per library: uploaded textures, fonts and pixel art cels. - App.ts runs the preload on every project event. That covers opening a project, new assets and edits from a collaborator. - A new test hook __gm.heldPictures() reports which textures of the project are in memory. Not done on purpose: - The tilemap keeps no fallback frame while a step is still loading. - Sounds still load on first play. Not checked: the flicker itself was not reproduced in the browser, the e2e check measures "held in memory". Modules 42, 44 and 47 read textures from the project and were not run locally. Tests: - ./check.sh: 174 files, 2518 tests, CHECK EXIT 0 - e2e 39 + 40: ALL PASSED, 96 checks - 3 new unit tests for preload and the project file list - New e2e check 40k-ii: an unplaced picture is held after a reload - Counter-probe: without the preload 40k-ii fails with "Autotiles: held false, unworn: held false" Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> |
||
|
adminandClaude Opus 5.5
|
6015869297 |
Let the scene view hide symbols, names and shapes per asset kind
The scene view gets crowded once a scene holds many behaviors, colliders and tilemaps. A new eye button in the topbar opens a list of all placeable asset kinds, and each row has toggles for what the scene view draws for that kind. - The popup lists all 9 placeable kinds from Behavior to Tilemap, with the columns Symbol, Name and Shape. It stays open while switching. - Sprite, Text and Tilemap draw no symbol, so their symbol toggle is greyed out. Their name toggle shows a new centred name tag, which is off by default. - Shape exists for Collider and Tilemap. A hidden collider outline is neither drawn nor clickable. A hidden tilemap shape removes the collision outlines and the paint tint, the tiles stay visible. - A hidden symbol takes no slot in the ring and draws no dashed link to its parent. A name that stays on moves to the centre of the object. - The setting lives in the project as `sceneVisibility`, not in localStorage. Older projects load with the defaults, which match the view as it was. - Switching has no undo step, like the game scale. It only changes the view. A change made during Play survives Stop. - The rules sit in `src/core/model/sceneVisibility.ts`, the popup in `src/editor/panels/SceneVisibilityPopup.ts`. Four new SVG icons. Not covered by a check: symbol off with name on for a kind with a symbol, Text and Tilemap with names, and the paint tint with shape off. Tests: - ./check.sh: 173 files, 2515 tests, CHECK EXIT 0 - e2e 46: ALL PASSED, 17 checks. 46g clicks the popup, lays a small tilemap over the crate and removes it again. - e2e 8 alone on a fresh seed: ALL PASSED, 23 checks. A red check in the partial run 2,8,46 came from the module selection. - 8 new unit tests in tests/editor/scene-visibility.test.ts. - 4 counter-probes, each fails its test: load ignores the saved value, Play skips the saved model, scene view ignores collider shape, scene view ignores tilemap shape. Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> |
||
|
adminandClaude Opus 5.5
|
66868de10a |
Show destructive menu entries in red text, not on a red fill
A red filled row in a context menu shouted louder than the action deserves. The entry now looks like every other entry and only its text is red, so the menu stays calm and the warning is still there. - Menu: danger entries are ghost buttons with the new text style danger. On hover they get the same grey fill as all other entries. - Theme: new text style danger in the normal font size. The existing warning style is small and did not fit a menu row. - Button: two getters expose the drawn text colour and fill, so a test can measure the look instead of reading the danger flag. - Test hook __gm.menuLooks() lists both per menu entry. - Confirm dialogs keep their filled red Delete button. That is a separate widget and was not part of the request. Tests: - ./check.sh: 172 files, 2498 tests, CHECK EXIT 0 - e2e 25: ALL PASSED, 31 checks. New check in 25g opens the menu with a real right click: Delete row has text #e0553f and no fill, Insert frames keeps the normal text colour. - Counter-check: with the old styling the check fails with text #ffffff on fill #e0553f. Original restored per cmp and rebuilt. - Not checked: other menus (graph, assets) have no own check. They run through the same Menu code. Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> |
||
|
adminandClaude Opus 5.5
|
89b95aa8ac |
Move "Delete row" from the inspector into the timeline menu
The context menu of the timeline is where the other row and key actions live. A separate button in the inspector was easy to miss and sat apart from them. - The timeline menu gets "Delete row" as a danger entry after a separator. It deletes the row under the pointer, whether the click hits the row header or a cell. Below the last row or on the ruler it is disabled. - A right-click on a row header now also selects that row, like a right-click on a key selects the key. A right-click in an empty cell keeps the selection so chosen keys stay available for Copy. - The "Delete row" button in the "Timeline row" inspector is gone. "Delete keys" for a multi-key selection stays. Tests: - ./check.sh: 172 files, 2498 tests, CHECK EXIT 0 - e2e 25: ALL PASSED, 30 checks. New check in 25g deletes a row via a real right-click and restores it with all three keys via Undo. - No counter-probe. No check covers the right-click into a cell. Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> |
||
|
adminandClaude Opus 5.5
|
0c5ac32b59 |
Let structs and lists nest to any depth (#239)
Structs and lists were capped at two fixed levels (list of structs, struct with a list field). Anything deeper was dropped silently on load, in node settings and when written to a variable. The cap came from an early design choice, not from a technical need, so it is lifted completely instead of adding a third fixed level. - One kind list NESTED_KINDS replaces ListItemKind and StructFieldKind. The flat special cases in listItems.ts are gone, every value goes through one recursive path. - A struct inside a struct is declared, like a top-level struct. Values coming in over an edge are brought into that shape. Struct items in lists still take their fields from the value. - New valuePath.ts addresses any nested spot by keys and indices. ListSlot.field is now ListSlot.path. - Field commands (add, rename, remove) take the path to the struct. They change declaration, own value and all overrides in one undo step, as before on the top level. - Inspector: "+ Field" offers Struct and List on every level. A nested struct is a header row with its own "+ Field", its fields are indented one step further. - List tab: a list item shows "n items" and opens one level deeper. The title shows the path, e.g. "Listy · nums · [3]". - Pack in Pack now writes a struct into a struct field instead of text. Objects are kept at any depth and stripped at every exit. - A list edit in a struct field without an existing object override now starts from the shown value instead of an empty struct. - Old projects load unchanged. Save, load and save again gives the same result. Tests: - ./check.sh: 172 files, 2498 tests, CHECK EXIT 0 - e2e 21 + 22: ALL PASSED, 90 checks (new 21d-iii, 22f-ii, 21d and 22f updated) - 20 new unit tests in nested-values.test.ts and nested-list-slot.test.ts, three tests that pinned the old cap turned around - 6 counter-probes, each fails 1 to 8 tests, originals restored and checked with cmp - Not covered: a nested struct inside a struct item in the list tab has no e2e click Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> |
||
|
adminandClaude Opus 5.5
|
7979b8ff19 |
Let structs and lists hold objects across behavior runs (#238)
An object could only live in a dedicated object variable, kept in slots
beside the variable bag. Struct fields and list items could not hold
one, so a spawned object packed into a struct or list was lost. This
replaces the slots with one mechanism for all three places.
- "No object" has one resting form everywhere: {"$object": ""}. A
running game can tell an object slot from an empty text that way.
- During play the object handle lives directly in the value, also
nested in structs and lists. objectSlots.ts and the special paths for
Keep and Properties are gone.
- liveObjects.ts strips objects to (null) at every exit: overrides the
editor run writes back to the scene, saved values of persistent
Variables assets, live values in the inspector, and the world
snapshot of the test hooks (objects as names there).
- A destroyed object reads as (null) through isAlive, alone, in a
struct field or as a list item.
- "+ Field" and "+ Item" offer Object. The inspector and the list tab
show a fixed (null) row without input.
- Lists from Raycast all stay objects when written to a variable.
Before they turned into names.
- A struct that only changes by an object writes no override. A list
that grows by an object writes [(null)], its length really changed.
Found on the way: CI at
|
||
|
adminandClaude Opus 5.5
|
98211a8d54 |
Let a variable hold an object across behavior runs
A spawned object was only reachable in the run that spawned it. The Spawn output could not go into a variable because "object" was a port-only kind, so the next run had no way back to the instance. - "Object" is now a variable kind. The reference lives for the run only. The file stores the declaration and an empty value. - The live reference sits in slots beside the variable bag (graph/objectSlots.ts), not in it. The bag is the behavior's props, and syncToModel would have written an object into the scene. - A destroyed object, or one from a restarted or left scene, reads as nothing. A dead reference is dropped from its slot. - Keep (#229) hands the slots of kept variables on to the next call of a sub-behavior. - Properties of kind Behavior reads and writes another behavior's object variable through the same slots. - The inspector shows "(null)" for it and offers no input. - A persistent Variables asset with an object variable shows a warning under "Persistent". Saved values never keep the object, every run starts it at (null). Objects inside lists and struct fields are left out on purpose. Emptiness is checked with Equals against an empty b. A node "Is valid" does not exist yet. The test helper graphEditor().variables() now also reads the kinds of a Variables asset a node points to. Tests: - ./check.sh: 169 files, 2463 tests, CHECK EXIT 0 - e2e 6 + 23: ALL PASSED, 146 checks (new 23k, 2 checks) - e2e 32: ALL PASSED, 18 checks (new 32f-ii) - 10 unit tests in tests/core/object-variable.test.ts, one of them runs a persistent asset over two runs - 5 counter-probes (value in bag, isAlive always true, no Keep hand-over, Properties without slots, object in saved values) each fail their test - e2e check total 1406, computed only Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> |
||
|
adminandClaude Opus 5.5
|
923baf2557 |
Let Spawn take an asset over an edge and find a child by name (#237)
An asset could only be picked as a setting on the Spawn node. It could not be wired in, held in a variable or put into a list. Finding an object below the own one needed a scene-wide search by name. - "Asset" is now a kind like Animation or Sound: port, variable, list item and a new "Asset" literal node, with its own cube icon. - Spawn and Is asset have an `asset` input. It uses the key of the old setting, so a saved asset reads as the value of the input and older projects keep spawning without a migration. - New node "Child by name" searches below an object level by level. A child wins over a grandchild of the same name. Nothing found or no object gives null. Tests: - ./check.sh: 168 files, 2453 tests, CHECK EXIT 0. - 9 new unit tests in tests/core/asset-kind.test.ts, catalog cases for Spawn, Is asset, Child by name and the literal. - e2e 6z-ii (2 checks): node rows and a real drag of the literal onto `asset`. e2e 6: 119 checks passed. Spawn checks in 3 and 9 passed. - Counter-checks: depth-first search fails 1, Spawn reading only the old setting fails 3, runtime ignoring the parent fails 1. Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> |
||
|
adminandClaude Opus 5.5
|
1b3cb625a3 |
Let a text field select from right to left with the mouse (#236)
Dragging from right to left in a canvas text field only moved the cursor. The hidden input behind the field got every selection sorted and without a direction. Its selectionchange echo then handed back the sorted range, and the anchor jumped to the mouse on the first move. - KeyboardBridge sets the selection with 'backward' when the focus lies before the anchor, and reads selectionDirection when the input reports a change. - TextField passes anchor and focus through unchanged. Its own sorting is gone. - Shift+Left runs through the same path. The cursor should now sit at the moving end there too. This is not tested on its own. Tests: - ./check.sh: 167 files, 2435 tests, CHECK EXIT 0 - e2e 2: ALL PASSED, 25 checks. New check 2d-ii drags right to left in the name field and reads start 0, end 13, direction backward. - Counter-check without the direction: 2d-ii fails with end 2, the reported symptom. - e2e check total in README goes to 1401 (computed, not run in full). Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> |
||
|
adminandClaude Opus 5.5
|
085e6c8cce |
Keep edited list values when an item is deleted (#235)
The list tab read the list once when it built its rows. Editing a value does not rebuild the rows, so the delete button later filtered that old copy and wrote it back. Every edit since the last rebuild was lost. Adding an item only triggered it, because adding rebuilds the rows and that state became the old copy. - ListAccess.value in src/editor/list/slot.ts is now read on every access instead of once when the access is built. - The kind switch of a row and the struct field buttons (field type, rename, remove field, + Field) read the item when clicked, not when the row was built. They had the same stale copy. - New test hook __gm.list.removeAt(i) clicks the delete button of one row, because the tab shows many buttons with the same label. Not covered by a test of their own: the struct field buttons and the kind switch after an edit. The cause is the same, the fix is in code. Tests: - ./check.sh: 2435 tests, CHECK EXIT 0. - Unit test in tests/editor/list-slot.test.ts keeps one access, edits a value, adds and edits an item, deletes another. All edits stay. It fails without the fix. - e2e 21b-ii with real clicks: set row 2 to 66, delete row 0, expect ["11","66"], two undos take both back. e2e 21: 52 checks passed. - Counter probe: with the old snapshot the check fails with ["11","44"], the reported bug. - Check total in README is now 1400 (+2), counted, not measured. Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> |
||
|
adminandClaude Opus 5.5
|
1d18862ed6 |
Give unconnected node inputs the default the node shows (#234)
A new node handed null to every unconnected input that had no port default, even a Bool. The inspector showed false, 0, "" or an empty list at the same time, so what the node read was not what the editor said. 97 of 135 inputs of the built-in nodes were affected. - inlineValue() falls back to the default the inspector shows. One place covers every node, also future ones and saved projects. - A default list is handed out as a fresh copy per read, so a node that edits its input in place cannot change the shared default. - The node shows the value it reads: an empty text or list as (empty), an object or struct input without a link as (null). Live values while playing use the same words. - A key input without a key keeps showing a dash, like the key field in the inspector. - Visible changes in old projects: To text without input gives "" instead of "0", Select and First not empty give "" instead of null. Tests: - 8 new unit tests in tests/core/inline-defaults.test.ts, among them one over all built-in nodes that no typed-in input reads null. - The e2e check in module 6 reads the rows of an unlinked Name of node. The check sum stays the same. - ./check.sh: 167 files, 2434 tests, exit 0. e2e 6: 117 checks. Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> |
||
|
adminandClaude Opus 5.5
|
8b44f97c35 |
Let a child sort with its parent so its Z stays local (#232)
An animated or set Z of -1 on a weapon put it behind everything on Z 0, not just behind the player holding it. A child can now opt in to being drawn at its parent's place, so its own Z only orders it against the parent and its siblings. - New property "Sort with parent" on sprites, texts and particle emitters, shown in the inspector right under Z. It is a normal property, set on the asset and overridable per object. - With it on, the rest of the scene sees only the parent's Z and, where the layer sorts by Y, the parent's feet. Below 0 the child is drawn behind the parent, from 0 on in front. - It works across levels: a grandchild with the switch hangs on the top object of the chain. - It has no effect under a parent that is not drawn itself (container, behavior, camera, collider) or under a tilemap. - New assets start with it on, saved ones read as off, so old projects draw unchanged. For that a schema row now has "initial" next to "default". The gold "changed" mark and reset follow "initial", so a fresh sprite is not marked as changed. No load migration is needed. - parentGroups() in drawOrder.ts gives a slot only to the top of a chain and inserts the children there. Editor, play mode and picking all use it, so they agree. Tests: - 10 new unit tests in tests/viewport/sort-with-parent.test.ts. - 8 existing tests list the sprite rows or defaults and got the row. - New e2e check 5b-ii clicks the switch and checks order and undo. - Counter-checks, all originals restored by cmp: switch ignored fails 7, children not sorted by Z fails 6, no chain fails 1, "initial" ignored fails 9, row missing in the inspector fails e2e 5. - ./check.sh: 166 files, 2426 tests, CHECK EXIT 0. - e2e 5: ALL PASSED, 13 checks. Check total 1398, computed only. Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> |
||
|
adminandClaude Opus 5.5
|
fae827c087 |
Let an animation key Z so an object can pass behind another
The timeline offered X and Y as position rows but never Z. The list of position rows was simply written without it when animations came in with #97. A swinging weapon could therefore not go behind its character. - Z is the third position row, after X and Y, on every placed root or object. A scene and a behavior still offer no position. - Play and preview already read and write any position row by name, so the one entry in POSITION_KEYS is all the code change. - The draw order is sorted on every render, and play writes z back into the scene each frame. A keyed Z therefore takes effect at once. A blended 4.5 sits above 4 and below 5. Tests: - ./check.sh: 165 files, 2416 tests, CHECK EXIT 0. - 3 new unit tests in tests/core/animation.test.ts: Z is offered after X and Y and not on a behavior or scene, a running game moves the object from behind to in front of another one, and play, scene write-back and preview agree on z. - e2e 25: ALL PASSED, 29 checks. The new check reads X, Y, Z as the first rows of the row dialog. Check sum 1396 -> 1397. - Counter-check: without z in the list all 3 new unit tests fail. Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> |
||
|
adminandClaude Opus 5.5
|
147f8ffbea |
Let animation keys ease with Sine to Bounce in, out or in-out
A key could only ease quadratically, which makes quick moves like a sword swing feel soft. Animators know the Penner curves from CSS, GSAP and Unity, so a key now offers all of them. - Ten curves (Sine, Quad, Cubic, Quart, Quint, Expo, Circ, Back, Elastic, Bounce), each in, out and in-out, next to Linear and Step. - The inspector shows two fields instead of one long list: Easing, and Direction only when a curve is picked. Switching the curve keeps the direction. Coming from Linear or Step starts at in-out. - Old projects keep working. ease-in/out/in-out now read as Quad and are still saved under that name. New curves save as cubic-out, back-in-out and so on. - Back and Elastic overshoot on purpose. A number property with min or max is clamped in play and preview, so a Back in from scale 0 does not flip the sprite. trackWriteAt now takes the property definition, and animatedKind* is renamed to animatedDef*. - The timeline marker still shows only the direction. - In-out is built for every curve from its in-curve and its mirror. easings.net uses own constants for Back and Elastic in-out, so our Back in-out winds up about 5 % instead of 10 %. Tests: - ./check.sh: 165 files, 2413 tests, CHECK EXIT 0. - 12 new unit tests in tests/core/easing-curves.test.ts: round trip of all 30 values, start/end/midpoint of every curve, reference values, only Back and Elastic leave 0..1, clamping in play and preview, unknown values are rejected. - e2e 25: ALL PASSED, 28 checks. New 25b-ii (3 checks) clicks both fields and undoes the four choices. Check sum 1393 -> 1396. - Counter-checks, each fails its test: no clamping (2), Quad saved as quad-* (2), mirrored in-out wrong (2), curve lookup with `in` instead of Object.hasOwn (1), no Direction field (e2e 25). Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> |
||
|
adminandClaude Opus 5.5
|
94749b4f3e |
Let a project keep named snapshots and restore them (#231)
Autosave only keeps the latest revision. Before a risky change there
was no way to put a known good state aside and go back to it later.
The main menu now has "Snapshots..." to create, restore and delete
named copies of the open project.
- Server: SnapshotStore.php keeps each snapshot as a copy of the
project JSON under data/snapshots/<project>/ (git-ignored). Four
routes under projects/{id}/snapshots use the same owner check as the
project, so an admin also sees foreign snapshots.
- Create writes the autosave first. With unsaved edits (play with open
edits, failed save, conflict) no snapshot is made and a message says
why. The rule is the pure function in src/editor/snapshots.ts.
- An empty name falls back to the local date and time.
- Restore asks first, then keeps the current state as "Before
restoring <name>". It writes the snapshot back as a new revision and
reloads the project, so the undo list is empty. A restore can itself
be undone by restoring that snapshot.
- Deleting a project deletes its snapshots too. Images, sounds, fonts
and pixel art are content-addressed and never deleted, so a snapshot
can always reach them.
- Client: SnapshotStore and HttpSnapshotStore in src/core/store, the
SnapshotsDialog, and the flows in ProjectSession. A stale revision
(409) becomes StaleRevisionError.
- CI runs the new PHP test in the gate job next to accounts.
Not covered by e2e: the lock during play and the conflict case. Both
are unit tests only.
Tests:
- check.sh: 164 files, 2401 tests, CHECK EXIT 0.
- tests/php/snapshots.test.php: 14 checks, all passed.
- tests/editor/snapshots.test.ts: 5 tests for the time format, the
blocker rule, the routes and 409.
- New e2e module 50 on a throwaway project: create, rename, restore,
undo the restore, delete, then delete the project and get 404 on
its snapshots. 46b expects the new menu entry. e2e 46,50: 20 checks
passed. The check sum goes from 1385 to 1393 (computed).
- Counter-checks, originals restored and compared with cmp: blocker
always allowed fails 1 unit test. No sorting fails 2 PHP checks.
Restore without keeping the old state fails 50c and aborts 50d.
- The first sort test with 2 snapshots passed by chance half the time
because of random ids. It now uses 8.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
|
||
|
adminandClaude Opus 5.5
|
17a6fd0339 |
Move the shader test sprite off a name plate so CI passes again
Every suite run since |
||
|
adminandClaude Opus 5.5
|
21d7149756 |
Let a nested behavior without a start node run from On start (#230)
A behavior built as a plain behavior, with On start and no Behavior start, did nothing when another behavior called it through Run behavior. The node only showed a warning. Such a behavior should run as a call too, without the author having to rebuild its entry. - New callEntries() in nested.ts returns the Behavior start node or, when there is none, every On start node. callProblem uses it too. - GraphInterpreter.call() follows all entries one after the other, in graph order, in the same frame and with the same variables. - Behavior end still returns what reaches it. A call through On start has no inputs, because only the start node declares them. - It is a fallback only. With a Behavior start present, On start nodes stay out of the call. - The node warning now reads "No start or On start node - does nothing" and only shows when neither exists. - Keep and local state machines behave as before. Tests: - ./check.sh: 163 files, 2396 tests, CHECK EXIT 0 (before 2392). - 4 new unit tests in tests/core/nested-behavior.test.ts: the flow after On start runs, the return value arrives, several On start nodes run in graph order, a start node keeps On start out. - e2e 19: ALL PASSED, 35 checks. Only the expected warning text changed, the check sum stays at 1385. - Counter-checks: without the fallback 3 tests fail. With only the first On start exactly the order test fails. Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> |
||
|
adminandClaude Opus 5.5
|
454d202109 |
Let each variable of a behavior choose whether calls keep it (#229)
The first version of #229 put a Keep state switch on the Run behavior node. The user wanted it where the variable is declared instead. Whether a value lives on belongs to the variable, not to every call site. - The node switch keepState is gone again. RunBehavior, CallResult and nested.ts are back to what they were before #229. - BehaviorAsset.keptVariables lists the kept names. It lives on the asset and not in PropertyDef, because that is the schema of every inspector row. - A variable added from now on starts with Keep on. Variables in existing projects start with Keep off, so old projects run unchanged. - SetVariableKeptCommand flips the switch as one undo step. Add, remove and rename carry the list along. Loading drops names that are not declared. - The interpreter keeps only the listed variables, per Run behavior node and per object as before. The others start at their defaults. - Local state machines in a called behavior start empty on every call again, as before #229. Global and scene machines are unchanged. - The inspector shows a Keep button in each variable row of a behavior. Its state is part of the asset signature, so a click redraws the row. Without that the button kept its old look until the inspector was reopened. Found: the project Garden of Sacrifices still has keepState = true on the call Player -> Character Movement. It is ignored now. Direction there predates the switch, so Keep is off until set by hand. Tests: - ./check.sh: 163 files, 2392 tests, CHECK EXIT 0 (before 2388) - tests/core/keep-state.test.ts rewritten, 15 tests - e2e 19: ALL PASSED, 35 checks. 19c-ii now clicks the Keep button of a new variable: on when added, off by a click, on again, off after undo. - Counter-checks, each fails its own test: keep list ignored (2), states kept (1), new variable not kept (8), rename drops the list (1), no Keep button (e2e 19c-ii). Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> |
||
|
adminandClaude Opus 5.5
|
7c70245c79 |
Let a nested behavior keep its variables between calls (#229)
A Run behavior call started with fresh variables every time, so a nested behavior could not count, remember or keep a local state machine across calls. A new "Keep state" switch on the node lets the callee resume where its last call left off. It is off by default, so existing projects run unchanged. - RunBehavior gets the boolean parameter keepState and its node description explains it. - GraphInterpreter keeps the state in keptCalls, keyed by the call path, the chain of Run behavior nodes. Two nodes calling the same behavior each keep their own state. - One interpreter exists per behavior instance, so every object gets its own state without further code. - Local state machines of the callee are kept like its variables. - resumedVariables() matches kept values against today's declarations. A new variable starts at its default, a removed one drops out, and one whose kind changed starts over. - The kept state lives as long as the object in the run. It is not written to save games. Limit: a callee input named keepState collides with the switch. The same already holds for the name behavior, so it is not caught. Tests: - ./check.sh: 163 files, 2388 tests, CHECK EXIT 0 (before 2377) - 10 new unit tests in tests/core/keep-state.test.ts and 1 new node catalog case. - e2e 19: ALL PASSED, 35 checks, with the new check 19c-ii for the checkbox, its click and undo. - Counter probes: ignoring keepState fails 5 tests, state per behavior instead of per node fails 1, dropping the outer path fails 1, skipping the kind check fails 1, and without the node parameter the e2e check fails. Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> |
||
|
adminandClaude Opus 5.5
|
021a6dcb56 |
Zoom the tile tab in the same steps as the scene view
The tile tab zoomed freely, so the pixels of a tile could end up
unevenly wide at odd factors. Scene view, container tab and animation
preview already snap to FREE_ZOOM_STEPS. The tile tab now does the
same, so every pixel editor zooms alike.
- The wheel steps through FREE_ZOOM_STEPS, counted in device pixels.
The board position is rounded to whole device pixels.
- New wheelSteps() in src/viewport/view.ts turns wheel events into
steps: one notch is one step, a trackpad gathers 50 px per step.
FreeViewport uses it too, so the rule exists only once.
- Fit takes the largest step at which the whole board fits. Refitting
on a new tab or board size stays as before.
- panAndZoom takes an optional zoom rule instead of limits. Graph and
node board keep zooming freely.
- A saved view from before the steps snaps to the nearest step.
- The cap parameter of frameBoxes from
|
||
|
adminandClaude Opus 5.5
|
4027afc228 |
Let Fit fill the tile tab instead of stopping at 100 percent
Fit in the tile tab left the board small in the middle of the tab. It used frameBoxes, which never zooms past 1 so that two graph nodes do not blow up to fill the screen. The tile board is measured in image pixels, though, and with 16 px tiles it is only about 345 x 186 px. - frameBoxes takes a new cap parameter, default 1. The graph and the node board keep their behaviour. - The tile tab passes its zoom limit of 6, so Fit fills the tab up to 600 percent. - TileCanvas remembers whether the view is still the one Fit set. While it is, a change in the size of the tab or of the board fits again. After a pan or zoom by hand the view stays until Fit. Found on the way: switching the image to another tile size (48 to 16 px) kept the old zoom, and the board shrank to a third. The refit above covers that too. Tests: - ./check.sh: 161 files, 2370 tests, CHECK EXIT 0 (was 2369). - New unit test in graph-framing: with a raised cap Fit fills the view up to the limit. The graph test for "not past 100 %" holds. - e2e 39: ALL PASSED, 31 checks (was 29). Fit fills the tab at 48 px (zoom 0.41) and fits again after the switch to 16 px (zoom 1.24). - Counter probes: a cap of 1 and no refit on a new board size each fail exactly the 16 px check (zoom 1 and zoom 0.41). - e2e sum in the README is 1384, computed, not yet seen in CI. Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> |
||
|
adminandClaude Opus 5.5
|
50bddf68d4 |
Keep scene view names readable on plates and in rows of their own
Symbol names in the scene view were plain grey text. On a background of a similar colour they could not be read, and names of symbols close together were drawn over each other. - Each name stands on a rounded, nearly black plate at 70 % opacity, 3 px padding left and right, 1 px top and bottom. - The text is light (viewportLabel) instead of muted grey. - The plate of a selected object gets an accent border. - New rule stackLabels in src/viewport/labelRows.ts. A name that overlaps another name or an icon moves one row down, then one up, then two down and so on, until a row is free. - Names are placed top to bottom, so the upper one keeps its row. A name only moves vertically and stays on the side of its icon. - Names outside the view still claim their row. Otherwise the visible names would jump while panning. - New hook __gm.sceneLabels() for the e2e check. The frame names in the texture editor already had a plate, so they are unchanged. Not covered by tests: the accent border on selection. Readability on a light background was only judged from a screenshot on a dark one. Tests: - 5 unit tests in tests/viewport/label-rows.test.ts: free names stay, the lower of two colliding names moves, the stacking order, names avoid icons, 30 crowded names never overlap. - e2e 5c-ii: 8 symbols on one spot give 8 plates, no overlap with each other or with icons, each name on the side of its icon. - Counter-checks: without the overlap test in the rule 4 of 5 unit tests fail. With the scene view ignoring the rows exactly 5c-ii fails. - ./check.sh: 161 files, 2369 tests, CHECK EXIT 0. - e2e 1-5: ALL PASSED, 140 checks. The e2e sum is now 1382 (computed). Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> |
||
|
adminandClaude Opus 5.5
|
af6ac12ab5 |
Show sharp tile preview labels and paths with tunnels and crossings
The mask labels under the tile preview sat inside the zoomed board. Pixi rendered them at 10 px and stretched them with the zoom, and each label was shrunk to the width of its tile on its own. They came out blurry and in different sizes. The example map also only showed a ring, so narrow paths and crossings were never previewed. - The labels live in their own layer in screen space and are re-rendered at the fitting font size on every zoom. - All labels share one size, at most the 10 px of the theme. Below 6 px they are hidden. - A label has two lines: the sides on top, the corners dimmed below. - The example map keeps the ring cell for cell and adds a network of 1 tile wide paths below it. It has straight 1xN and Nx1 pieces, curves, two T junctions, a crossing and a dead end. - The map stands next to the grid in a wide panel and below it in a tall one. Fit picks the layout with the larger tiles, and only Fit changes it, so zooming does not make the board jump. - The new hook __gm.tile.captions() reports size, scale and lines. Found on the way: the taller map made Fit zoom out further, and 3 pixel checks on the 16 px terrain tiles failed. The side by side layout fixed that. Tests: - ./check.sh: 160 files, 2364 tests, CHECK EXIT 0 (was 2363). - e2e 39: ALL PASSED, 29 checks (was 28). - New unit test: the example map has straights, a curve, a crossing with four notched corners, a T junction and a dead end. - Counter check: with the labels back in the zoomed board the new caption check fails (scales [0.648, 1]). - The e2e sum in the README is now 1381. It is calculated only. Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> |
||
|
adminandClaude Opus 5.5
|
89048413f1 |
Let a texture frame set where a sprite stands for Y sorting (#228)
A sprite sorted by Y stood on the bottom of its box. With a shadow or empty rows under the feet that is too low, so a figure slipped in front of a tree it should stand behind. The line belongs to the frame, not the texture, because one texture can hold several sprite sheets. - New field `sortLine` on a frame: whole image pixels up from the frame's bottom edge, 0 to the frame height. 0 is stored as nothing, so old projects stay the same. Shrinking a frame keeps the line inside it. - `feetOf` in drawOrder.ts lifts a sprite by the same share of its box. Scene view, game view, play and picking all use it. In an animation the line of the frame shown right now counts. - The texture tab draws the selected frame's line dashed in yellow with a knob left of the frame. At 0 the line shares the bottom edge with the nine-slice border and a resize handle, so the knob is tested first. A line inside the frame can be dragged directly, tested after the nine-slice lines. - The inspector has a new "Sorting" section with a "Sort line" field. Dragging or typing is one undo step each. Limit: frames of one walk cycle need the same value, set by hand. Otherwise the figure changes its place in the order while walking. Tests: - ./check.sh: 160 files, 2356 tests, CHECK EXIT 0 (before 2350). - 6 new unit tests in tests/viewport/sort-by-y.test.ts. - e2e 37 and 39-43: ALL PASSED, 162 checks. New check 37b-ii drags the knob up 6 px and undoes it, plus the inspector row. - Counter checks: if feetOf ignores the line, exactly the 3 order tests fail. If the knob cannot be grabbed, 37b-ii fails. - The e2e sum in the README is 1380, counted, not yet seen in CI. Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> |
||
|
adminandClaude Opus 5.5
|
50854389bb |
Let a tilemap layer sort its rows by Y with the objects (#228)
A tilemap layer was one piece in the draw order, so a figure stood either in front of a whole layer of trees or behind all of it. For a top-down game the trees in front of the figure's feet have to cover it and the ones behind must not. - A new "Sort by Y" box under the layer list sets `sortByY` on the painted layer. Every change is its own undo step. - Such a layer comes as one draw slot per row. On its `z`, the rows and all objects on that `z` are sorted by where they stand: the bottom of an object's box, the bottom of a row. Ties keep the hierarchy order, and other `z` values are untouched. - A layer drawn as one piece and the map's own node stay behind the sorted ones on the same `z`, since neither has a single place to stand. Ground belongs on a lower `z` or stays unsorted. - A new tile property "Sort offset" (whole rows, -16 to 16) lets a crown sort with the trunk below it. - `TilemapField` draws a container per row for such a layer, and picking takes the row into account, so a click picks what is drawn in front. Scene view, game view and play share the same rule. Limits: on a rotated map "down" is world Y. A layer sorted by Y costs about one draw call per row and tile instead of one per tile. Tests: - ./check.sh: 160 files, 2350 tests, CHECK EXIT 0 (before 2340). - 10 new unit tests in tests/viewport/sort-by-y.test.ts. - e2e 39-43: ALL PASSED, 148 checks. New check 40p-iii ticks the box and finds the slot of row 0, undo brings back the whole layer. - Counter checks: without the Y sort 5 unit tests fail, with the offset ignored 5, with no row in picking 1. If TilemapField draws no rows, exactly 40p-iii fails in e2e. - The e2e sum in the README is 1378, counted, not yet seen in CI. Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> |
||
|
adminandClaude Opus 5.5
|
c1a6d63edb |
Cover which tilemap layer and texture frame get a collision fill
|
||
|
adminandClaude Opus 5.5
|
8f29b88cc9 |
Make the actor smoke reach every sub pixel edge position again
Since #225 the game view opens at 100 % instead of fit. The actor walks 150 px/s, so its top edge only lands on .0 or .5 of a pixel. The check for the frame top edge needs 0.6 to 0.9 and gave up in 6 of 7 CI runs. The picture itself was fine: the pixels above and at the edge were the same in every red run. - While nudging the actor into place the smoke slows time to 0.08 with __gm.setTimeScale. The actor then moves 0.2 px per frame and can reach any position inside a pixel. - Time scale goes back to 1 before the edge is measured. Tests: - Old smoke on the same seeded project fails locally like CI (fraction 0.08). - New smoke passed three times in a row (fraction 0.80, 21 checks). - The actor project file was saved first and restored byte exact. Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> |
||
|
adminandClaude Opus 5.5
|
4b7e8614a8 |
Keep play start and game view scale in the project (#226)
Both settings lived in the browser's localStorage, so they did not travel with the project and differed per machine. They now belong to the project like the symbol scale. There is no migration, old projects load with the defaults. - New module src/core/model/playSettings.ts reads playFrom and gameScale on load. Unknown or missing values fall back to the start scene and 100%. - src/editor/settings.ts is gone. - Play starts in the project settings dialog is an undo step (SetPlayFromCommand). It is only recorded on a real change. - The game view scale is saved with the project but is no undo step, so Ctrl+Z never undoes a zoom. A scale picked during play is written to the stored project and survives Stop. - Save states of persistent Variables assets (saves.ts) stay in the browser on purpose. They are runtime data of the game, not settings. Tests: - 6 new unit tests in tests/editor/play-settings.test.ts: defaults, save and load, broken JSON, undo of Play starts, scale without undo step, scale picked during play survives Stop. - e2e 03g checks the value in the project, nothing in localStorage and no new undo step. 35f also checks project.playFrom. No new checks, the sum stays at 1375. - Counter checks: no write to the stored project in play, no read on load, and an undo step for the scale each fail exactly their test. - ./check.sh: 158 files, 2332 tests, CHECK EXIT 0 - e2e 1-17,28,30,35,38-40,46: ALL PASSED, 752 checks Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> |
||
|
adminandClaude Opus 5.5
|
5afb70a92e |
Let the project set the size of scene view symbols
Pixel art projects draw at very different sizes, so the fixed 18 px icons of behaviors, containers and rigidbodies were too big in some projects and too small in others. The size now lives in the project settings and travels with the project. - New field Symbol scale in the project settings dialog, below Play starts. It takes 0.1 to 4 with two decimals and defaults to 1. - The value is stored as project.symbolScale. Older projects load with 1, and values out of range are clamped on load. - Every change is its own undo step through a project command. - The factor scales the icon size, the spacing of icons that share a spot, the label offset and the selection frame of icon-only symbols. - The footprints in bounds.ts that Fit uses stay as they were. The hit area follows the icon, so clicks match what is drawn. - uiHooks reports the icon size so e2e can measure it. The e2e sum in the README is 1375. That is 1374 plus one new check, and 1374 itself has not been confirmed by CI yet. Tests: - ./check.sh: 157 files, 2326 tests, CHECK EXIT 0 (before 2320). - New tests/core/symbol-scale.test.ts with 5 tests (default, save and load, clamping, undo, icon frame), one more in project-settings.test.ts. - e2e 46f: dialog opens with 1, 0.5 plus Apply gives a 9 px icon, undo gives 18 again. Module 46: ALL PASSED, 13 checks. - Counter checks: without loading the value the save and load test fails. With the icon ignoring the factor exactly 46f fails. Both originals restored per cmp. Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> |
||
|
adminandClaude Opus 5.5
|
9ef360ba1b |
Let the game view show the picture at a chosen scale (#225)
The game view always stretched the camera picture to fit the pane.
Pixel art came out blurred at odd factors, and there was no way to
see the game at its real size. The view now has a header with a
scale drop-down, and 100 % is the default.
- The header of the new GamePane offers Auto, Fit, 25 %, 50 %,
100 %, 200 % and 400 %. Auto and Fit show the factor they land
on, e.g. "Auto · 100%", and follow the pane when it resizes.
- 100 % means one screen pixel per pixel of the camera resolution
(width x height). The camera zoom scales the world on top of
that, so a zoomed camera still fills the same frame.
- Auto takes the largest fixed step that fits the whole picture
and falls back to 25 % when nothing fits. Fit keeps the old
behaviour.
- A picture larger than the pane is cropped around the camera
centre. Fixed steps start on a whole pixel so pixel art stays
sharp at 100 %.
- The choice is kept in the browser like "Play starts". Nothing
is written into the project.
Found on the way: the first draft applied the step to the world
instead of the camera resolution. The camera zoom then had no
effect at 100 %, which the existing check 12c caught (zoom 1.37
measured as scale 1).
The CI smokes were not run locally, because that would reseed
projects the user works in. All three smoke cameras are 640x360
and fit the 670x383 harness view at 100 %.
Tests:
- ./check.sh: 156 files, 2298 tests, CHECK EXIT 0 (before 2290).
- 8 unit tests in tests/viewport/view.test.ts for whole-pixel
steps, cropping, Auto and Fit with fallback, and zoomed cameras.
- 7 e2e checks in 03g. e2e 1-17,28,30,38-40: ALL PASSED, 727
checks.
- Counter-checks: no cropping, no rounding, no factor reported to
the header, and no zoom share each fail their own tests.
- Check total: 1367 (CI at
|