875c76026a5043c1de08ba0fbcbd042295b5a00a
211
Commits
| Author | SHA1 | Message | Date | |
|---|---|---|---|---|
  adminandClaude Opus 5.5
|
875c76026a |
Silence a free video once its sprite is destroyed (#420)
A sprite whose Video clock is free played its video on after it was destroyed, heard in a game, until the player was let go 2 to 4 s later. A driven one was already held and quiet after 100 ms. - The library holds and quiets a free player nothing asked for in HUSH_MS, as it did a driven one. That covers Destroy, a scene load, the end of a run and a sprite switched off. - Asked for again before it is let go, it plays on from where it was held, heard only in a run. A hidden page leaves it alone, as the sweep does. - A sprite only out of view keeps its free video playing and heard. Whether a video is heard should not hang on the camera. Before, it ran 2 to 4 s and was then let go. Now it plays on, which opens its player even where it was never in view. Tests: - Unit: video-library 1 new. A free player losing its wearer is held and quiet 200 ms later, stays so through a new run, plays on heard when asked again with the same element, and runs on on a hidden page. - e2e 66 on melektaus-atx: ALL PASSED, 36 checks, 66g-ii new. Heard 31 frames before Destroy, held and muted in every frame read after. - Counter-probe without hushing free players: the unit test and only 66g-ii fail, the player plays on heard (paused false, muted false). - Gate on melektaus-atx: 309 files, 4797 tests. Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> |
||
|
adminandClaude Opus 5.5
|
acd12326dc |
Fade sounds and videos in and out on the items of a composition
A trailer needs its music and its clips to come in softly and leave
softly. Until now an item of a composition could only play at one
level, and a video item could not even be turned down on its own.
- Every item with sound gets a grip at its upper left and upper right
corner. Dragging one inwards fades the item in or out. Dragging it
back to the edge removes the fade. Lower down the same edge still
trims as before.
- The fade is drawn as its curve, with the part above it darkened.
The inspector shows Fade in and Fade out in seconds, each with the
curves sound clips already know.
- The model keeps fadeIn and fadeOut in frames plus curveIn and
curveOut on the item. Old projects load unchanged. An item shorter
than its fades plays them cut to its length but keeps the setting.
- Sound, pattern and song items ramp the gain of their own bus. The
scheduler plans the ramps on the audio clock next to the notes.
Starting in the middle of a fade picks it up from there.
- Video items set the new sprite property Video volume each frame.
It multiplies with the fade and is only shown for a driven video.
The player glides to each new level over 15 ms so it does not click
between frames.
Not covered: a container item that carries a video further down gets
no grips. Only a video on the item's own sprite counts.
Tests:
- tsc, eslint, Prettier clean.
- Unit tests for composition, music, song and sound (12 files): 269
passed, 7 of them new.
- e2e 69 on melektaus-atx: ALL PASSED, 21 checks. 69p drags a grip to
a fade in of 10 frames and hears the item bus rise from 0.127 over
0.229 and 0.339 to 1 within one second.
- Counter-checks as unit tests: without the audio ramps, and without
the level on the video sprite in the game, both go red.
- Gate on melektaus-atx: 309 files, 4796 tests passed, 8 more than
at
|
||
|
adminandClaude Opus 5.5
|
77ac9d1aaf |
Play sounds, patterns and songs on the tracks of a composition (#418)
A trailer needs its music and effects on the same timeline as its pictures. Until now a composition could only place objects, so sound had to be started by hand from a behavior and drifted against the picture. - Audio items: a sound, a clip of a sound, a pattern or a song dragged from the asset panel onto a track becomes an item as long as one pass of it. It may share a track with object and video items and overlap them. - Editing works as for other items: move, resize, trim on the left (moves the offset), fit to media, delete, copy and paste, box selection. Sounds draw their waveform, the colour tells the kind. - The inspector shows what it plays, start, length, offset, volume (-60 to +12 dB) and bus. The bus is "From asset", the master or one of the buses, as asked for in the issue. - An item longer than its material plays in rounds. Sounds and patterns start over, a song runs on in its loop. Loop marks on the item follow the same rule, a song's first mark sits at its loop end. - compositionAudio.ts turns the items into sequences, each with its own tempo. CompositionSound plays them, in the tab and in a game. - In the tab the items are heard from the playhead on, straight into the master like every tab. A scrub is silent. Playing a song or pattern in its own tab stops the composition, and the other way round. - In a game they are planned on the audio clock for the moment the composition clock reaches them, with the scheduler's LEAD made up. While the clock stands (waiting for a video, paused, placement off) they are silent and resume at the right spot. Found along the way: - The asset panel never let a song out of its list, so a song could not be dragged anywhere. Song and scene tab reject it as they reject a pattern. - The asset panel scrolled to the selected asset on every rebuild of its list, so folding a group far below the selection jumped back up. Only a new selection scrolls now. - At the end of the list, folding a group pulled every row down by the rows that went away. ScrollContainer has a new opt-in holdOffset, set only in the asset panel, that keeps the offset until the user scrolls up. Limits: a time scale other than 1 or a frame longer than 0.1 s moves the picture and not the sound. A baked song plays its notes here, not the bake. Tests: - tsc, eslint, Prettier clean. Gate on melektaus-atx green, 309 files, 4788 tests (4772 plus 16 new). - Unit: composition-audio.test.ts 13 new, scroll-container 3 new. Counter-checks: without catching up on load time or without the silence on pause the unit tests go red. - e2e 68h: the sound is planned 1.2 ms after the composition reaches 0.5 s. Without the LEAD make-up it is 54 ms late and red. - e2e 04 and 69 ALL PASSED, 86 checks. 69o-ii drags a pattern and a song onto a track, 20 frames each. - e2e 04: folding Sound at the end of the list keeps its header at y 234. With the old panel it jumps to 984 and the check is red. - Not run in a browser: the loop marks of a song item, copy and paste of audio items, the bus choice. - README and wiki count 2072 checks. Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> |
||
|
adminandClaude Opus 5.5
|
30b618d9a9 |
Show game view recordings in their true colours in other players
A game view recording looked darker and its colours off in VLC, and each round of recording a recording made it worse. Chrome's encoder, fed RGB frames, wrote full-range H.264 and left the colour out of the stream. Only our Matroska head said "full range", and VLC reads only the stream. Chrome itself plays the converted MP4, which was right. - The GPU now turns the game view into I420, limited range BT.709, before it is read back (PictureReader). The encoder gets the planes with that colour, as it does for a recording of the whole editor. - Where the planes lie in the read-back picture is a plain function, i420Layout in recording.ts. - Only 1.5 instead of 4 bytes a pixel come back from the GPU. - avcColour.ts writes the colour into the SPS of the encoder's avcC as well, so a player that reads only the stream knows it. An SPS with a VUI only gets its colour block replaced. One without gets a VUI that holds the colour. An SPS it cannot read stays as the encoder made it. - A first try sent the frames through a 2D canvas. That gave limited range too, but only 18 to 20 of 33 frames at 1080p30. Found on the way: - With the colour in the stream alone, VLC 3.0.8 still showed the full-range picture too dark. It ignores the range. - The one old full-range original on the server got the same SPS fix without loss: the clusters are byte-equal, the decoded frames are equal (framemd5), backup in /root/config-backup-20261013/videos/. - Older game view recordings stay full range. Fixing that in VLC would mean encoding them again. Tests: - tsc, eslint, Prettier clean. - Gate on melektaus-atx: CHECK EXIT 0, 308 files, 4772 tests. - avc-colour.test.ts new (9), expectations read back with ffmpeg trace_headers. Counter-check: the old bug in the no-VUI path turns it red. - e2e 67: ALL PASSED, 12 checks. 67d-ii reads tv/bt709 from the file and from the bare H.264 stream, red with the old code. - 1080p30 34 frames, 640x360@60 68 frames, none dropped (was 33/47). - Checked by the user: a new recording looks right in VLC 3.0.8. Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> |
||
|
adminandClaude Opus 5.5
|
d4ff652293 |
Keep descenders of a text whole and frame it at its drawn size
A text was drawn into a texture as tall as Pixi measures the string "|ÉqÅM". Whatever reached further, like the "g" of Manrope (0.015 em below the "q"), was cut off at the bottom. The blue frame around a text was only estimated from the font size and the number of letters, so it was far too wide for most texts. - textPicture.ts takes the height of a line from the font itself (fontBoundingBoxAscent and fontBoundingBoxDescent, as a browser does). Pixi draws with a margin, and the picture is cut to that box afterwards. Where Pixi's own box is larger, Pixi's box wins. - Both raster paths (linear and nearest) use the cut. - The height no longer depends on the letters typed, so a text does not jump while it is edited. - bounds.ts asks a measurer that textPicture.ts registers (setTextMeasure). Selection, picking in a running game, framing the camera, the drop preview and culling all get the measured size. The footprint functions take the font file for this. - Unit tests in node have no canvas and keep the estimate (estimatedTextSize). - Texts get taller: Source Sans 3 at 48 px is 68 instead of 55 px, Manrope is 1.366 em instead of 1.25 em. The glyphs stay in place, the centre moves by less than half a pixel. A shader on a text gets a taller UV rectangle. Tests: - Gate on melektaus-atx green: 307 files, 4762 tests. - 5 new unit tests for textBox, textCut and the measurer hook. - e2e 30: 26 checks, 30f-iii new. The texture is 68 high, the font box is 68, the frame equals the drawn picture (237x68). - Counter test: with Pixi's old box the texture is 55 high and 30f-iii is red. - Not checked in the browser: the Manrope caption of the user and texts with several lines. Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> |
||
|
adminandClaude Opus 5.5
|
9445f39c8d |
Space the letters of a text object closer or wider apart
The Feuerwerk wordmark is set with -0.03em tracking. Text in the engine had no letter spacing, so the wordmark came out about 3 % wider than the logo. - Text has a new property Letter spacing, default 0, in the same unit as the font size. It goes between each two characters, so ten characters get it nine times. Negative values pull them together. - TextPicture hands the value to Pixi's text style. Both rasters, the smooth and the sharp one, use it, and it is part of the raster key. - The estimated text width in bounds.ts adds the spacing too, so selection, picking and "Add collider" fit the drawn text. - Like every number property it can be animated and set from a graph. That is not tried in the browser. Tests: - New unit test for the footprint with spacing. 102 tests in the three text files green. - e2e 30f-ii measures the width of "Handgloves" on screen: 237 without spacing, 282 at +5 (expected +45) and 210 at -3 (expected -27). e2e 30 on melektaus-atx: ALL PASSED, 25 checks. - Gate on melektaus-atx: CHECK EXIT 0, 307 files, 4757 tests. - No counter-check run for 30f-ii. Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> |
||
|
adminandClaude Opus 5.5
|
043c224cc3 |
Rename Game Maker to Feuerwerk and serve it at /feuerwerk/ (#422)
The editor gets a name of its own that fits beside Brandmauer, Glutspeicher and Feuerwehr. This is stage 1, 2 and 4 of #422: the name, the URL and the stored state in the browser. Repository, CI runners, containers and the GAME_MAKER_* variables follow in stage 3. - All paths come from SITE_PATH in src/core/site.ts: the API endpoint, the data folders, the play page and the base in vite.config.ts. A later move is one line instead of fifteen. - The window title, the sign-in screen, the playground and the README say Feuerwerk. The package, __feuerwerkPlay, the take worklet and the writing app in Ogg and Matroska follow. - The session cookie is now feuerwerk_session, so everyone signs in once more. - localStorage keys are now feuerwerk.*. moveOldStoredKeys copies the old game-maker.* keys over on the first start, so settings, panel sizes and save games survive. - tools/ci/serve.sh serves the build under /feuerwerk/. The variable GAME_MAKER_BASE_URL keeps its name until stage 3. Outside the repository, nockal.com/feuerwerk/ is a second symlink to the same tree. nginx sends the bare /game-maker/ folder there with a 301. Everything else under /game-maker/ is still served directly, so shared play links and the API keep working. Finding: when nginx redirects a path without a trailing slash or with a query, the Brandmauer answers with its own 307 to the same URL plus a slash, placed after the query. A play link would lose its token that way, which is why only the bare folder is redirected. Tests: - Gate on melektaus-atx: CHECK EXIT 0, 307 files, 4756 tests (4 new in site.test.ts). - Counter-check: when the migration misses the old prefix, 3 of the 4 new tests fail. - e2e 60 under /feuerwerk/: ALL PASSED, 20 checks. - From outside: /feuerwerk/ 200, /game-maker/ 301, an old play link 200. Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> |
||
|
adminandClaude Opus 5.5
|
f92d69d902 |
Rebuild the Acid node after the acid voice of nodeseq (#421)
The first Acid hardly squelched. Its tanh ate the resonance, and its sweep fell evenly in octaves. The user pointed at the acid tone of nodeseq.com/studio, so the node now follows how that voice is built from Web Audio parts. - The filter is a two-pole 12 dB low-pass with Q in dB up to 17.5, like a BiquadFilterNode. The ladder and its tanh are gone. - One ADSR drives both the volume and the filter. The sweep falls back in Hz, fast from the top and long at the bottom. - Every note glides from the one before. A new note cuts the last one off, and the node plays its release itself. - Knobs: cutoff, reso, env, attack, decay, sustain, release and glide. The defaults are the acid preset of nodeseq. - Accent, slide, drive and tuning are dropped. Old projects were not kept, the user had only placed the node for a try. - A hook __gm.acid.compare renders a line offline through our worklet and through the nodeseq graph, for e2e 34. Found on the way: in Chrome an oscillator that starts inside a render block runs its first samples at 440 Hz. The comparison evens this out. Tests: - tsc, eslint, Prettier clean - Unit: acid.test.ts rewritten with 12 tests. chip-presets and sound-library follow the new node. - e2e 34 on melektaus-atx: ALL PASSED, 148 checks. Against nodeseq the loudness per 10 ms window is at most 0.14 dB apart, and 95 to 97 % of the windows are equally bright. - With a linear Q instead of Q in dB the comparison is red. - Gate on melektaus-atx: green, 306 files, 4752 tests. That is 4754 less the 14 old and plus the 12 new Acid tests. - Not checked: the sound by ear, the master chain of nodeseq, the keyboard and a bake with the new node. Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> |
||
|
adminandClaude Opus 5.5
|
d844f2734a |
Add an Acid instrument node for TB-303 style bass lines (#421)
The instruments could only come near a 303 with a Chip, a Filter and two envelopes. The biquad filter does not saturate, every note strikes anew, and there was no slide and no accent. - Acid is a new instrument node that plays a saw or a square through a four-pole ladder low-pass with tanh saturation, oversampled twice. Knobs: cutoff, resonance, env mod, decay, accent, tuning and slide time. - An accent comes from the velocity, from 0.9 on. It is louder, opens the filter further with a shorter decay, and accents close behind each other build up. - Two notes that touch or overlap slide. Each note stays a voice of its own, so the scheduler is unchanged. The notes of a line share one synth in the worklet, and the new voice takes it over from its first sample on. - The node sets its own volume, so it needs no envelope behind it. - The graph shows it as a device with the filter curve at rest and at the top of the sweep. - A preset Acid Bass puts an Acid in front of a short echo. Tests: - tsc, eslint, Prettier clean - Unit: 14 new tests in acid.test.ts for pitch, low-pass, resonance, sweep, accent, slide and the handover between two voices. - e2e 34 on melektaus-atx: ALL PASSED, 148 checks (3 new). The handover sits on sample 4800 and jumps by 0.0012, of three notes only the second slides. - Without the handover, or with a slide that strikes anew, the unit tests are red. - Gate on melektaus-atx: tsc, eslint, Prettier clean, 4753 of 4754 tests green. The red one was sound-library.test.ts, which did not know the new slid count in the stats. Fixed, and the file alone is green again with 128 tests. No second full gate. - Not checked: the sound by ear, slide at the keyboard, a bake with Acid, the CPU load of many notes. Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> |
||
|
adminandClaude Opus 5.5
|
3443368855 |
Record a game from its very first frame
Start recording has to set up its encoders first. It asks the browser whether it can encode H.264 at the size and hooks in the sound tap, both asynchronously, and it only took its size at the first frame. Meanwhile the game ran on unrecorded. A caption that fades in from alpha 0 at the start was already visible in the first recorded frame. - A run now waits while a recording sets up its encoders, at most 3 s, as it already waits for its videos at Play. That holds in the editor and in play.html. - The recording takes its size at Play, right after the game view has the world, rather than at the first frame. A Start recording in On start is so ready before the first tick. - A recording started in the middle of a game holds the picture for that moment. A sound that already plays goes on. Tests: - tsc, eslint, Prettier clean - e2e 67 on melektaus-atx: ALL PASSED, 11 checks (67a-ii new). The first recorded frame is at game time 0.0168 s, the first frame. - Without the wait 67a-ii is red: the first recorded frame is at 0.1667 s, so 10 frames were lost. - Gate on melektaus-atx: green, 305 files, 4740 tests, run on this commit and the one before together. - Not checked in the browser: a start in the middle of a game, and play.html. Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> |
||
|
adminandClaude Opus 5.5
|
2ba41c1bd0 |
Record 1440p and 4K, and choose sound and conversion in the node
The Start recording node only offered the game view, 720p and 1080p, and always recorded with sound, converted and imported. The recording from the main menu could already leave those out. - Resolution has 1440p and 4K. As with 720p and 1080p the height is fixed and the width follows the camera, so 16:9 gives 2560x1440 and 3840x2160. - Every resolution is capped at 3840x2160, as the game view already was. A 21:9 camera in 4K would be 5040 px wide, which the encoder levels are not made for. It is scaled down to 3840x1646. - The node has Sound, Convert and Import after conversion, all on by default as in "Start recording...". Import only counts with Convert. An old graph without the inputs records as before. - A released game ignores Convert and Import and downloads the MKV. - Both recordings now hand their upload options the same way, from GameRecorder over PlaySession to RecordingUploads. RecordingUploadOptions moved to core/recording/recording.ts. Tests: - tsc, eslint, Prettier clean - Unit recording and node-catalog: 451 green, recording 29 with 3 new tests and 1 extended - e2e 67 on melektaus-atx: ALL PASSED, 10 checks - Not checked in the browser: a real 4K recording, and the node with its switches off. - The gate ran once on this commit and the next one together. Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> |
||
|
adminandClaude Opus 5.5
|
65d7bf6a1f |
Silence a composition video as soon as its item ends
A video in a composition plays on a driven player that the item tells where to stand every frame. When the item ended, its object was gone and stopped asking, but the player ran on with its sound until it was let go for being unused. That took 2 to 4 seconds, and in a pause it never happened at all. The same held for the composition preview. - A driven player nobody asked for in 100 ms is now paused and muted. When its wearer comes back it carries on where it should be, as before. It is still let go after 2 to 4 seconds. - A player still without its first picture keeps playing, without sound, because it only gets that picture by playing. - Leaving the animation or composition tab now silences their video preview at once instead of after 2 to 4 seconds. - Free videos (Video clock free) keep the old behaviour. A sprite destroyed by a behavior is still heard for 2 to 4 seconds. Tests: - Unit video-library: 10 green (1 new). Without the new timer the new test is red. - e2e 68: ALL PASSED, 11 checks (68g new). An item of 0.5 s with a 2 s video plays audibly while it is there, and the player is paused and muted in every frame from about 200 ms after it ends. - Gate on melektaus-atx: green, 305 files, 4737 tests. Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> |
||
|
adminandClaude Opus 5.5
|
ba01d146e9 |
Choose size, rate and what follows when recording the editor
The editor recording had fixed settings: the canvas size at 60 fps,
always converted and imported. Recording in 4K needs a choice, and the
server shrank every video to 1080p anyway. Start recording... now opens
a dialog, and a recording always goes to the server as it is.
- The dialog holds name, resolution (Screen, 1080p, 1440p, 4K), fps
(60 or 30), mouse pointer, sound, Convert and Import after
conversion. Import is greyed out while Convert is off. The browser
keeps the last choice, not the name.
- A larger resolution makes the editor draw finer while it records,
so 4K is sharp, not stretched. It is never below the screen's own
resolution and goes back after Stop.
- Stop always uploads. Without Convert the file only stays on the
server. Without Import it is converted but no asset is added. Both
are found in the video picker.
- The server keeps the original next to each MP4 for every upload, so
Download in the video tab and the picker gives the original. Videos
from before have none, they still download their MP4.
- A file left unconverted shows in the picker as not converted, with
a Convert button. POST videos/{file}/convert queues it, and upload
takes convert=0.
- The worker now caps a video at 3840x2160 instead of 1920x1080. Videos
converted before stay as they are.
Tests:
- PHP videos.test.php: 81 checks green, with the original, convert=0,
a later Convert and the 4K cap.
- Unit recording: 5 new, green. Red without the rule that a recording
is never below the screen's resolution.
- e2e 67e-ii: the video tab downloads the .source.mkv, a Matroska
file. 67f: 1440p from a 1280x800 window gives 2304x1440 at 30 fps
without sound, kept and not imported, then converted in the picker.
Both red with the MP4 download and without the finer drawing.
- The README names 2045 e2e checks.
- Gate on melektaus-atx: 304 files, 4699 tests green.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
|
||
|
adminandClaude Opus 5.5
|
93190e185c |
Route a video's sound through its own Master routing node
An editor recording had no sound while the video tab played a video. The tab played its <video> straight to the speakers, past the Web Audio graph, so the recording tap behind the limiter never heard it. Fixing only that would have left videos as the one sound source the Master routing cannot reach, so they get their own node, like sounds. - A video asset with sound has a routing node labelled "Video". One without sound has none, it would have nothing to send. - Its links take the sound after volume and FX. Several links or another level give the video its own bus, as with a sound. - A new video follows the bus most other videos use. With none linked yet it goes to the Master, not to where the sounds go. Songs and sounds no longer follow videos either. - Players only know their file, so videoBusesOf maps each file to the bus of its first asset. setMix takes that map and moves the gains of running videos at once when the routing changes. - In the game, played in the editor or released, a video's sound follows its links. The tabs (video, composition, animation preview) play straight into the Master, as the sound tabs have since #368. - The video tab's sound now goes through the Master, so its volume, FX and limiter apply there and the editor recording hears it. - The recording badge beside the menu is an HTML element over the canvas now. The second render that drew it on the desynchronized canvas let the screen show a frame without it, so it flickered. The element is never in the copy, and clicks go through it. Tests: - Unit master-routing and sound-library: 3 new, green. Red without video in the routing kinds, without moving the gains, and with the old rule for the links of a new video. - e2e 66e-iii: the tab plays a video linked to a bus, the level is 0.09 on the Master and 0 on the bus. 66g: in the game the bus has 0.09. Both red with the old ways. - e2e 67e reads the badge from a real screenshot, still green. - The README names 2043 e2e checks. - Gate on melektaus-atx: 304 files, 4694 tests green. Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> |
||
|
adminandClaude Opus 5.5
|
f177ee90a4 |
Record the whole editor from the main menu
The game view could already record itself through nodes. Making a video of the editor itself, to show how something is done, needed an outside screen recorder. The main menu now starts and stops one, with no options to set. - "Start recording" sits in its own group before General settings, and reads "Stop recording" while one runs. The name is "Recording <time>", the size is the whole canvas in device pixels (an odd row or column is cut), 60 fps always. Sound is the master, saving goes the same way as for the game view. - The encoder, the sound and the Matroska writing of a take moved from GameRecorder.ts to RecordingTake.ts. A take now reads its pictures from a FrameSource, so the game view and the editor share it. - The editor's picture is copied from the canvas after each render, in the same frame, so nothing is drawn twice. A resting editor does not render, and the recording repeats its last picture. - The mouse pointer is drawn into the recording in the shape the editor shows (arrow, hand, resize arrows, I-beam, crosshair, move). - A red dot with the running time stands beside the menu button on screen only. It is drawn after the copy, and the toolbar makes room for it. - Drawing that dot made Pixi take it as the root for every hit test, and the menu would not open any more. The stage is set back as the last rendered object after it. Tests: - Gate on melektaus-atx green: 303 files, 4686 tests. - Unit recording: 20 green, 5 new. - e2e 67: 8 checks, 67e new. It records through the menu and decodes the MP4: 1280x800 at 60 fps, the pointer black at the mouse, the dot missing, 238 plain spots alike with the canvas. Without the pointer and with the dot drawn before the copy, 67e is red. - e2e 46: the main menu lists "Start recording". Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> |
||
|
adminandClaude Opus 5.5
|
c0ba2673ba |
Keep the video tab's picture following while scrubbing (#417)
Scrubbing in the video tab set currentTime on every pointer move. Each new seek aborts the running one. With a large video a seek takes longer than the gap between two moves, so none finished and the picture froze. The composition tab never had this, because its players run through the VideoLibrary, which only keeps the newest wish while a seek runs. - The pending-seek logic moves into a shared helper, src/viewport/videoSeek.ts. The VideoLibrary uses it unchanged. - The video tab seeks through the same helper and uploads the picture again after each finished seek. - Play drops a pending scrub wish. Otherwise the video would jump back right after it starts. - Scrubbing before the first picture no longer jumps back to the time the tab opened with. The video stays at the last chosen time. Tests: gate on melektaus-atx green, 303 files, 4681 tests (2 new in video-seek). e2e 66 ALL PASSED, 30 checks. Without the helper the new unit test is red ([0.1, 0.2, 0.3, 0.4, 0.5] instead of [0.1]). There is no browser check for the freeze itself, the test video seeks too fast to show it. Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> |
||
|
adminandClaude Opus 5.5
|
b2b4cbad28 |
Keep a video's loading out of recordings and first frames (#417)
A Start recording right after Play composition still began with empty frames. The composition's clock waited for its video, but the recording went on and took every frame while the video loaded. A clip that starts later in the video also slipped through, because its player already had one picture while it still sought to the clip's start. - The view now counts every video sprite it leaves out as missing, not only one without any first picture. - GameRecorder takes no frame while the game view misses a video, for at most VIDEO_WAIT_MS (3 s) at a time. The recorded time stands and the sound of that time is dropped, so it stays in sync. - RecordingClock.start forgets a hold from before the first frame. Without that, the first real frames all got the time 0. - A followed player starts at 1x until the first speed reading. Before, it paused and sought every frame for about 100 ms, so the first pictures after a wait stuck and then jumped. A step faster than 4x and a time running backwards do not count as a start. - Test hooks: __gm.gameVideo(id) reads the game view's own player, TakeInfo.lastFrameAt shows when the last frame was taken. Tests: - Unit recording (clock after an early hold), video-follow (2 new, 1 adapted): 449 green in tests/core/recording, tests/viewport and tests/core/composition* - e2e 68e (a clip from 0.8 s shows that picture first and then plays), 68f (a recording that already runs takes no frame while the composition's video loads) - 68e is red without the start at 1x, 68f without the hold - README: 2038 editor checks Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> |
||
|
adminandClaude Opus 5.5
|
6e6b6a4d9a |
Wait for a composition's videos and copy and paste its items (#417)
A composition lost the first frames of a video item. Its clock ran while the player was still loading, in the tab and in the game. The game only waited for videos once, when it started. A composition that a behavior starts later spawned its items after that wait. - The view now records which video sprites it left out for lack of a first picture, one entry per object. - The composition tab holds its playhead while the preview misses a video, for at most VIDEO_WAIT_MS (3 s) like the game. - CompositionSystem holds a composition's clock while one of its live items misses its video. The rest of the game keeps running. - The editor play and the published game pass their view to the run as RunServices.pictures. - VIDEO_WAIT_MS moves to core/model/video.ts, because the runtime does not import from viewport/. - Videos loaded ahead for coming items do not hold the clock. Items can now be copied and pasted inside the composition tab. - Ctrl+C keeps the timing of the copied items next to the objects. - Ctrl+V pastes objects and items in one undo step. The earliest item lands at the frame under the pointer, on the track there. - Without the pointer over the tracks it lands at the playhead, on the selected track or on the top track of the selected items. - Several items keep their distances and tracks to each other. - The same copy pastes into a scene as plain objects. Objects copied from a scene do not paste into a composition, they have no timing. Tests: - Unit composition-edit, clipboard, composition-play: 3 new for pasting, 1 new for the clock waiting in the game - e2e 69i (play from the end waits for the video), 69j (paste under the pointer and at the playhead), 68d (a composition started from On start waits for its video) - each new check is red without its fix - README: 2036 editor checks Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> |
||
|
adminandClaude Opus 5.5
|
4f0272638e |
Load the next item's video before a composition cuts to it (#417)
Two sprites with videos back to back left a blank frame at the cut. The video player only came into being once the item began, and a sprite is not drawn until its video has a first frame. So the second item was missing until its video had loaded. - compositionAhead lists the items that begin within the next second. Near the end of a looping composition it also lists the items at its start. - An item that is alive already is not loaded ahead. Two times would otherwise pull at the same player. - The frame carries these videos hidden and paused on their first picture at the item's offset. Their players get the id the item will have, so the cut reuses them instead of opening a second one. - This works the same in the tab's preview and in the game. - One second of lead (AHEAD_SECONDS) is an assumption. It can go up if large videos still flash. Tests: - Unit composition: 27 green, 2 new. Unit composition-play: 14 green, 1 new for the path in the game. - e2e 69: ALL PASSED, 12 checks. The new 69h puts two video items back to back and checks the second player is open and paused at its offset before the cut, and drawn in the same redraw as the cut. - Without loading ahead in the preview 69h fails with cut: null. Bending two spots in the model turned their unit tests red. - Gate on melektaus-atx: CHECK EXIT 0, 302 files, 4665 tests. Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> |
||
|
adminandClaude Opus 5.5
|
0334d2508d |
Place compositions in scenes and play them from behaviors (#417)
A composition can now sit in a scene like a container and play there. Its items become real objects while they run, so behaviors, colliders and events work on them as on any other object. - A composition is placeable with its own symbol, transform and render layer. The scene view shows its picture at frame 0. A click on that picture selects the placement, not a single item. - CompositionSystem spawns each item as an object under the placement when it begins, with the id <placement>~<item>. On start and the other events run. The object is destroyed when the item ends. - The top track lies in front no matter which item started first. World.arrange() orders the entity list and the scene objects. - Clips and driven videos follow the same rules as compositionAt(). Loop, restart, stop and the game pause work. - New nodes: Play composition (with restart), Stop composition and the event On composition finished. They were planned for step 4 but come now, because without autoplay nothing could play otherwise. - The editor run ignores Play composition and says so in the log. It writes into the saved project, and the items would stay behind. - contentId() moved to instance.ts. The animation system uses it for nested ids too. - Compositions get no "Sort with parent" for now. Tests: the gate passed with 301 files and 4643 tests, 18 more than step 1. 13 of them are in tests/core/composition-play.test.ts. The first gate run failed in event-order.test.ts, which counts the event nodes and now finds 19. Five counter-checks each turned exactly their test red. Two order tests stayed green without the fix at first and were rebuilt. e2e 68 is new and passed with 5 own checks. Its counter-check without arrange() failed as expected. Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> |
||
|
adminandClaude Opus 5.5
|
e191dc4b2e |
Record the game view from a behavior into a video asset (#405)
A game can now film itself. A behavior starts and stops a take, and the editor turns it into a video asset with the run's picture and the sound the player hears. The exported game hands the file over as a download, since there is no project to keep it in. - New action nodes `Start recording` (Name, Resolution, FPS) and `Stop recording`. An empty name becomes `Recording <timestamp>`. - Resolution is `Game view`, `720p` or `1080p`. For the fixed sizes the height is set and the width follows the camera. - The picture is the camera only, without hints, overlays or the letterbox. It is drawn into a render texture of the target size, so a smaller window still gives full 1080p. - `PictureReader` reads the texture back through pixel buffers with a fence. The editor never waits on the GPU, and a frame with all three buffers busy is dropped and counted. - Nothing of the take reaches the visible canvas. A first version drew tiles into it and copied them out, and with the low-latency canvas that midway state flickered on screen. - The sound is tapped behind the master limiter in the FX worklet and encoded as Opus. - H.264 is chosen when the browser has it, VP9 otherwise. A small own Matroska writer packs both tracks, no new dependency. It names the frame rate and BT.709 so ffmpeg keeps both. - A second `Start recording` is ignored with a warning in the log. A take goes on through `Load scene` and a restart, pauses with the editor and is saved when the run ends. It stops at 2 GB. - The editor uploads the take on the existing video route and makes the asset once the run is over. The video tab gets a Download button for the converted MP4. - `downloadBlob` in `src/ui` replaces the song editor's own copy. Findings: - `On start` runs before the game screen knows the world. A take therefore fixes its size on the first frame that has a camera. - Without a frame rate in the file, ffmpeg turned 30 fps into 59.94. - The worker's poster JPEG is off in colour for every upload (red 255 comes out as 229, BT.601). Not touched here. Tests: - Unit recording + matroska: 21 green, plus the node catalog cases. The Matroska test reads the file back with its own EBML reader. - e2e 67 (new) on melektaus-atx: ALL PASSED. 1080p30 from a 1280x800 window gives a 1920x1080 MP4 with sound and no dropped frame. Every 4th pixel is checked, a green quarter catches an upside-down picture. A take ended by Esc is saved with the timestamp name. - e2e 60j: the exported game downloads an `.mkv` with EBML magic. - The flicker is gone on the user's machine without `?vsync`. - Gate on melektaus-atx: CHECK EXIT 0, 299 files, 4586 tests. Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> |
||
|
adminandClaude Opus 5.5
|
36ffd9a61a |
Land a driven video's seek without a frame so it is never empty (#404)
Since
|
||
|
adminandClaude Opus 5.5
|
8118b8042b |
Let Texture size feed the Vertex output to scale about the middle (#409)
A scale about the picture's middle moves each corner by its distance to the middle times (scale - 1). In pixels that distance needs the picture's size, and Texture size was locked at the Vertex output as a per-pixel node. So the size had to be typed in by hand and was only right for pictures of exactly that size. - At a corner Texture size reads the uniform uPictureSize. It holds the size the Vertex output counts its pixels in, the same number the node gives in the fragment. The offset is divided by that size again, so a scale comes out right for every picture and sprite size. - A node can say what it is at a corner through emitPerCorner. The walker takes it there and emit everywhere else. - Fed a Pass's picture, Texture size stays locked at the Vertex output. A Pass has no picture at a corner. - 9-slice, field and camera shaders do not move corners. Their size is 0 there and nothing changes for them. Tests: - Unit shader-vertex: the node compiles at a corner to uPictureSize and the Output still reads textureSize. shader-passes: a Pass's picture into Texture size at the Vertex output is refused. - Against the old perPixel flag the new unit test fails. - e2e 28l-iv: width * 0.5 at x moves the 32 px picture as far as the constant 16 did, same three colours. With the size forced to 0 on the GPU the check fails and the picture stands still. - The case "Texture size is refused at a corner" left the it.each that lists refused nodes, so the test count stays the same. - e2e 28 on melektaus-atx: ALL PASSED, 101 checks. - Gate on melektaus-atx: CHECK EXIT 0, 297 files, 4562 tests. - tsc, eslint, Prettier clean. Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> |
||
|
adminandClaude Opus 5.5
|
b9fcf48097 |
Show a cut into the middle of a clip without its old picture (#404)
A switched-off driven video waits at the video time it has where it is, before its first key mostly the start value. Switched on at another spot, its player has to seek first. Until the seek is done the texture still holds the old picture, so the start of the clip flashed for a frame or two at the cut. - A view holds its last picture while a driven video that just came into sight is still seeking, for at most 0.3 s. At a cut the old clip stays one frame longer and the right picture of the new one follows. - A seek counts as done only when the browser hands in the next video frame (requestVideoFrameCallback), and the texture is uploaded right then. The seeked event alone was too early, one red frame was left. - A seek that takes longer than 0.3 s leaves the sprite out until its picture is there. The wrong picture does not show either way. Tests: - e2e 66q switches a sprite off at 0.2 s (red) and on at 1.2 s (blue) and reads every frame in the browser. No red may show, blue must stand at the end. - Against the old code 66q fails with 2 red frames before the blue. With only the seeked event it still fails with 1 red frame. - e2e 66 on melektaus-atx: ALL PASSED, 28 checks, run twice. - Unit video-library, video-follow: 19 passed. - Gate on melektaus-atx: CHECK EXIT 0, 297 files, 4562 tests. - tsc, eslint, Prettier clean. Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> |
||
|
adminandClaude Opus 5.5
|
3a1e420806 |
Read a driven video's speed on the frame clock so 1x stays 1x (#404)
A driven video measures how fast its wearer's time runs and sets its playbackRate from that. The time moves on with the ticker, but the reading took its clock from performance.now() while drawing. A frame that had more to do before the draw shifted that clock against the time, and a 1x animation read as up to 1.09. Outside 0.9 to 1.1 the video goes mute, so the sound could drop out for a moment. In CI this made e2e 66k red now and then. - VideoLibrary reads the speed with the timestamp of the frame (document.timeline.currentTime), the same clock the time runs on. It falls back to performance.now() where there is no document. - debugInfo() reports the measured speed of a driven player. - e2e 66k checks the measured speed and the correction of the rate apart. The rate alone may differ from 1 by up to 10 percent on purpose, so checking it at +-0.1 was too strict. Tests: - Unit video-library: 8 tests green, 1 new. With performance.now() back in place the new test is red and reads 1.089. - e2e 66 on melektaus-atx: all passed, 27 checks, speed 1.000 in all 5 readings. - Gate on melektaus-atx: CHECK EXIT 0, 297 files, 4562 tests. Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> |
||
|
adminandClaude Opus 5.5
|
dd60a795e1 |
Wait for driven videos before a run starts so no sprite flashes (#404)
The game view opens a player for each driven video only when it draws, and it draws only while its tab is visible. Without a detour over the Game tab the players came up with the click on Play. Until a video had loaded, its sprite showed its base colour, white in the user's cut. Sharing the players of the scene view would not have helped. From the Animations tab those are discarded after two to four seconds. - Play holds the run at second 0 until every driven video in the game view has its first picture, at most 3 s. The status line says "Loading the videos… · Esc stops". - The game clock stands while it waits. Behaviors and sounds start only after it, so picture and sound stay together. - Load scene in a running game waits the same way. - A driven video without a picture is not drawn at all instead of white. That holds everywhere, also on a switch to the Game tab without Play and at a cut whose video is not ready. - The exported player waits the same way. - __gm.playInfo() reports waiting for the e2e check. Tests: - e2e 66p puts the sprite in front of the camera and waits 4.5 s so the game view has no player left. Then it reads every frame of the run: 14 frames of waiting on #22252c at time 0, then blue, no white. - Against the old code 66p fails: 14 frames #ffffff, then blue. - Unit video-library: 7 passed, 1 new for loading(). - e2e 66 on melektaus-atx: ALL PASSED, 27 checks. - Gate on melektaus-atx: exit 0, 297 files, 4558 tests. - tsc, eslint, Prettier clean. Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> |
||
|
adminandClaude Opus 5.5
|
843b110bcb |
Hold a driven video at the end of its file instead of restarting (#404)
A driven video plays on for about 100 ms after the last key, until the speed reading says it stands. With the key close to the end of the file, that runs the video past it. The browser then marks it ended, and follow() called play() on it in every frame. Per the HTML spec an ended video starts over from the beginning of its file on play(). The sprite flashed the first picture one to three times before it held. - An ended video now counts as standing at its end. follow() holds it and seeks to the wanted picture instead of playing it again. - The end of the file counts as an end too, not only the end of the clip. Tests: - e2e 66o plays an animation in once mode to 1.95 s of the 2 s test video and records the player time in every frame. It must never jump back, and the last picture must stand. - Against the old follow() 66o fails, the player jumps back to 0 once. A first version with the key at 1.9 s stayed green, the video never reached the end of the file. - e2e 66 on melektaus-atx: ALL PASSED, 26 checks. - Unit video-library, video-follow, video-clock: 31 passed. - tsc, eslint, Prettier clean. Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> |
||
|
adminandClaude Opus 5.5
|
43fd22a763 |
Keep a driven video ready while its sprite is off (#404)
A cut between two videos flashed white: the sprite switched on had no picture yet, because its player only opened then or had been dropped meanwhile. A driven video now waits muted at its time while its sprite is off, in the editor and in a run. - A disabled sprite with Video clock Driven asks for its player without drawing it. A Free video still opens when shown. - A run's draw list keeps disabled driven sprites, marked as off. Before, collectWorldItems dropped every disabled object, so the game view never held a player for them. - VideoLibrary.wear() counts as asking. The sweeper dropped a held player after 2 to 4 s and it was loading again at the cut. - The speed of the asked time is read over a window that grows to 500 ms. Over 100 ms one 1/60 s step more or less read as 17 % off, the playback rate jumped and the sound dropped out. - A stream feeds every packet it has loaded to the decoder at once and waits once. One round trip per 20 ms packet let the decoder fall behind on a busy main thread, which made e2e 34 flaky in CI. Tests: - Unit streaming, video-library, video-follow: green, 4 new - e2e 34 + 66 (atx): ALL PASSED, stream skipped 0, 66m new - e2e 66 (atx), two runs: ALL PASSED, 25 checks, 66n new - Gate (atx): CHECK EXIT 0, 297 files, 4557 tests - Counter-checks: without the draw list fix 66n finds no player, without the wear() fix and with the old speed reading the new unit tests turn red Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> |
||
|
adminandClaude Opus 5.5
|
c9e8a3f6ac |
Let an animation drive a sprite's video picture by picture (#404)
A video used to run on its own clock as soon as a sprite wore it. An animation could switch the sprite on and off, but never say which picture shows at which frame. Cutting a video in an animation needs the opposite: the animation sets the time and the video follows. - Sprites wearing a video or a clip get two rows, Video clock and Video time. They show only while the texture holds a video. - With Video clock on Driven the video does not play by itself. It shows the picture at Video time, counted from the clip's start. Past the end it goes round with Loop and holds the last picture without. - Video time is a number like any other, so keys, step, easing and curves give stills, slow motion and ramps. - A driven sprite gets a player of its own, keyed by the wearer's name. The same clip can run twice at different times. - Following has two ways (`videoFollow.ts`). Running forward at 0.25x to 4x the video plays at that rate and is nudged. A still, a scrub or a step backwards seeks, and only the newest seek counts. - Sound is heard only near 1x. The animation tab now plays it too, so a cut can follow the sound. Scrubbing is silent. - Scene, game view, the inspector's PREVIEW and the shader preview show the driven picture. In a running game Play animation sets it. Found on the way: - After a scrub the video in the animation tab kept running. The preview redrew only while the playhead moved, so nobody asked for the video once it stood. `AnimationEditor.tick` now redraws it every frame while it shows a video. - Every sprite has two more defaults (`videoClock: 'free'`, `videoTime: 0`). Eight tests in five files pinned the old list and are updated. Tests: - Unit: video-clock and video-follow new, 4 files with 42 tests green. - e2e 66 (melektaus-atx): ALL PASSED, 22 checks, 3 new. 66i: two sprites on one clip stand at 0.2 s red and 0.7 s green. 66j: a scrub to frames 2, 7, 12 and 3 shows red, green, blue, red, and each colour still stands 0.7 s later. 66k: playing runs 10-30 ms behind at rate 1.00-1.03 and is not muted. - Counterchecks: a seek that keeps the rate turns the seek test red. Not seeing Driven turns 66i, 66j and 66k red. - Gate (melektaus-atx): exit 0, 297 files, 4546 tests. - Not tested in the browser: Play animation in a running game. Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> |
||
|
adminandClaude Opus 5.5
|
c815d2c35f |
Keep a playing video when the window comes back to the front (#402)
Chrome draws no frames for a hidden page, so the scene stopped asking
for its videos. The sweeper of the VideoLibrary kept running and
dropped every player after 2 s. Back in the window, the video started
over, and Pixi warned that a texture source was destroyed while still
bound to a shader.
- The sweeper skips a hidden page. The time hidden does not count as
idle, the 2 s start once the page is shown again.
- A dropped player only unloads its video source instead of destroying
it. A shader that still holds the source no longer warns.
- CI serves videos through a new router for php -S. The built-in
server answers no Range requests, so Chrome could not seek. e2e 66
had 4 red checks in the suite job of
|
||
|
adminandClaude Opus 5.5
|
d48f174caf |
Play videos on sprites, converted on the server with clips (#402)
A video becomes an asset like a sound: uploaded once, converted to one format by a worker of its own, cut into clips in its tab, and worn by a sprite through its Texture row. Only Chrome is a target, without alpha. - Server: POST ?r=videos queues the upload under the hash of its bytes, so the MP4's name is known at once. The worker (VideoWorker over VideoFormat) writes H.264/AAC, yuv420p, constant frame rate, a keyframe every 15 frames, at most 1920x1080, with a poster and the details beside it. A failed job says why and is tried again on the next upload. - An upload may be up to 2 GB. It is streamed from the request to disk and hashed there, so php-fpm holds none of it in memory. The other routes keep their 256 MB. - The worker runs in the container game-maker-video on stein2, a compose project of its own (tools/video/), and in CI beside the PHP server. The CI image has ffmpeg for it. - Model: asset type video with size, length, frame rate and sound, and clips like a sound's. The clip helpers and commands serve both. - A sprite's Texture row offers videos and clips after the pictures. resolvePicture names a playing video by a key, and the texture library hands it to a VideoLibrary with one player per key. - The editor shows a placed video as a quiet preview. Play starts it over at its clip's start and lets it be heard through the master bus, a pause holds it, Esc makes it quiet again. - Video tab: the picture, a ruler, the clip strip and a track on the Sound tab's time axis. A drag spans a clip, a handle moves an edge, Play plays the picked clip. - The picker shows a video on its way with its progress and adopts an upload from it once it is ready. Dropping a video file does the same. Decided on my own: - Two sprites wearing the same clip share one player and show the same picture. Control per instance belongs to the follow-up with nodes. - A video plays in real time, the game's time scale does not slow it. - The container may use 3 of the 4 cores of stein2. Findings: - The first real upload (279 MB) got 413: the API's own ceiling of 256 MB for every request, not nginx or the Brandmauer. - Chrome has no picture of a video that never played, and a Pixi VideoSource drawn before the first frame stays empty for good. The texture is made in the first frame callback (openVideo). - A player nobody asks for in 2 s is let go. The inspector's PREVIEW asked only on an edit, so with the sprite not on screen its texture was destroyed under it and the batcher threw on every frame. The preview now redraws every frame while it shows a video, like a Time shader. A let-go texture keeps an empty source instead of none. - VideoSource.load() reloads the element and cuts off an earlier play(). Playing starts after loadeddata. Tests: - PHP videos.test.php: 68 checks, with the real ffmpeg - 300 MB upload through Brandmauer and nginx: 201 in 21 s, php-fpm at 13.7 MB RSS at most - Unit videos.test.ts: 20 tests - e2e 66 (stein2, atx was off): ALL PASSED, 18 checks; e2e 04 with the new asset count green - Gate (atx): 294 files, 4520 tests. serialize.test.ts used video as its example of an unknown type and now uses a made-up one. - Counter-checks: a keyframe gap of 30 fails the PHP check, a key that keeps the video's end fails 2 unit tests, a clip without its end fails "plays only its stretch" in e2e 66 Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> |
||
|
adminandClaude Opus 5.5
|
28909f0adf |
Show a Limiter node as a device that holds what it took away (#397)
A Limiter only said what it does in rows of numbers. How much it took away, and when, could not be seen at all, and a short sound is over before any needle could show it. Now the node is a device of its own size, and its screen catches the reduction from the moment a sound starts and holds it once the sound ends. - LimiterPanel draws a 720x280 plate of brushed brick. The threshold knob is large, ceiling and release are small beside it, auto-gain is a lever. A LIMIT lamp lights while it takes something away. - The screen hangs the reduction down from the top, 0 to 24 dB by the square root like the Compressor's meter. The level coming in runs along the bottom, orange above the limit. Time runs from the start of the sound over 1, 2, 4 or 8 s, and a longer sound rolls. - ReductionCapture in limiterView holds the capture after 0.4 s of silence, without the silence, until the next sound. It writes the most taken away and when, and NOW or LASTED on the right. - The Limiter is tapped now, like the Compressor. The face reads the loudest sample since the last frame on both sides. - SpectrumTaps.levels takes a lateBy. The side in front is read 5 ms earlier, so a peak going in is met by what it became. - limiterReduction leaves the auto-gain out and solves Wet's blend for the limited part. Less than 0.2 dB counts as none. - A capture is also held when the node leaves the picture. Changing a knob or the lever leaves it as it is. - Hook __gm.limiter.panel(id) for the sound FX and instrument graphs. Decided myself: - The capture stays held until the next sound, not for a fixed time. - The screen has no wet knob, as the Compressor's has none. - The Limiter's two taps cost two gains of 1 per voice. The analysers only exist while the node is in the picture. Measured on stein2: the seeded blip at -4.4 dBFS against -12 dB showed 7.56 dB. Three hits at 0, -8 and -2 dBFS showed 11.9 dB at the first. In e2e 34 on melektaus-atx, -10.44 dBFS in against -20 dB showed 9.56 dB, the difference to the hundredth. Tests: - Unit: limiter-view 13 tests (new), spectrum 6 (1 new), soundfx 67 with the Limiter's taps. - Counter-test: without Wet's share in the formula the blend test fails. - e2e 34: ALL PASSED, 138 checks (1 new). - Gate: CHECK EXIT 0, 290 files, 4445 tests. Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> |
||
|
adminandClaude Opus 5.5
|
8c53ce0cbe |
Replace the 5-Band-EQ with the Parametric EQ and remove it (#395)
The Parametric EQ does all the 5-Band-EQ did and more, so the editor keeps only one EQ. The old node was used in one project only, with nothing linked to its band inputs. - "Garden of Sacrifices" was converted once on the project file, not by a load migration (#137). Its 5 nodes are Parametric EQs now with the same filters: low shelf 80 Hz, peaks at 250 Hz, 1 kHz and 4 kHz with Q 1, high shelf 12 kHz. A band at 0 became no band. - Two values below -24 dB were held to -24, as the Parametric EQ goes no further. Both are in the asset "Delay" (high -60, low -36). The user will rework them by ear. - The write went through the API's own Store (lock, revision 20181 to 20182), so a tab with the old revision gets a 409 instead of overwriting it. - Removed with the node: its stage kind "filter" and the type FxFilter, which nothing else made, and the player's branch for it. A Pan is now the last branch of fxNodes, a Flanger that of stagesOf. - Tests that took the 5-Band-EQ as "some effect" use the Pan or the Parametric EQ now. The test for a parameter feeding a band now feeds the cutoff of a Filter, which had no such test yet. - A project that still names the type, such as an old snapshot of "Garden of Sacrifices", loads without those nodes. Unknown types were always left out on load. Tests: - Unit (stein2): soundfx 67, instrument 36, envelope 13, sound-library 127, all green - Counter-check: with the cutoff not taken from the parameter, only the new Filter test goes red - The converted project loads and compiles: Delay, Vocals and Drums play their bands (3+1, 4 and 5) - e2e 34 (atx): ALL PASSED, 136 checks, the palette check now looks for the Parametric EQ - Gate (atx): CHECK EXIT 0, 288 files, 4417 tests Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> |
||
|
adminandClaude Opus 5.5
|
3f7eb03143 |
Check what a streamed sound holds by the library's own count (#378)
The e2e check that a streamed sound costs less than a decoded one compared how much the renderer process grew. Alone, module 34 saw it grow by 1 to 8 MB while streaming. After the 33 modules before it in CI it grew by 25 to 66 MB, and suite went red (CI tasks 611, 614 and 617, the last with 66.7 MB streamed against 95.9 MB decoded). - SoundLibrary.stats tells decodedBytes, the samples of every file decoded whole, and streaming.held, every head of a copy and what is sent ahead to the worklet. - StreamFile.headBytes and StreamFeed.ahead give their share. - The e2e check now asks the library: streamed it holds less than 4 MB more than before and nothing decoded whole, decoded it holds more than 40 MB, the five minutes being 50 MB at 44.1 kHz. - The growth of the renderer stays in the log of that check. The counter-proof that the renderer grows by more than 40 MB when the sound is decoded stays as it was. Tests: - Unit sound-library: the streaming test also checks the bytes held. - e2e 34 (melektaus-atx): 136 checks. Streamed 0.76 MB more held and none decoded whole, decoded 50.5 MB. The renderer grew by 4 MB and 49 MB. - Gate (melektaus-atx): 288 files, 4416 tests. Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> |
||
|
adminandClaude Opus 5.5
|
1df38bd430 |
Edit a Compressor in a tab of its own, with knobs and levels (#378)
A Compressor had only its number rows in the node. Its numbers are
easier to set by feel on a dial, and what it does is easier to judge
when the level going in and the level going out are seen side by side.
- Knob is a new widget in the toolkit: a slider bent into a circle,
its name above and a number field below. A drag up or down turns
it, Shift a tenth as far, a notch of the wheel a fiftieth of the
turn, a double-click sets the default, the number takes a typed
value. A taper gives the low end more of the turn.
- The Compressor's tab opens on a double-click, one per node, like
the Parametric EQ's. It has a knob for each of the seven numbers,
greyed while its input is linked.
- Its curve shows level in to level out from -60 to 0 dB. The point
where it bends sets the threshold, the end of the curve sets the
ratio that ends there.
- Its levels show the last 4 s on both sides of the node. Where it
takes more than 0.5 dB away, the stretch below the level coming in
is tinted. The makeup is left out of that.
- The Compressor is tapped like the EQ. SpectrumTaps listens to more
than one node at once and reads the loudest sample of the last
25 ms on each side.
- The node tabs share one map in the editor (nodeTabs), so a third
kind needs no new plumbing.
Findings:
- CI task 614 for
|
||
|
adminandClaude Opus 5.5
|
82e96e680f |
Decode a clip from a file of its own, not its whole sound (#349)
A clip was cut from its sound's file, so a game decoded the whole file for it and held it for as long as the page was open. A long recording played through a few short clips cost the recording. Every clip now has a copy of its cut as Opus, with Stream on or off, and a game decodes that instead. - StreamKeeper makes the copy of each clip whether its sound streams or not. Stream only decides whether a sound gets a copy of its own. - clipCopyTable says which cut decodes from which copy. The sound library loads the copy for a clip unless the whole file is decoded already. Then the clip is cut from that as before. - projectFiles decodes the whole file ahead only where something may play the sound itself: no clips, a clip without a fitting copy, or the sound's id anywhere in an asset that can name one. That last test walks the data, not the fields, so no place is missed. - A copy that cannot be had falls back to the whole file. A library that bakes keeps to the whole files, as the bake's fingerprint does. Tests: - Gate: CHECK EXIT 0, 280 files, 4319 tests (7 new: streams +4, sound-library +3). - e2e 34: ALL PASSED, 108 checks (2 new). With Stream off a fresh library decodes the ten-second reversed clip's copy and not the five-minute file. It is the cut made from the original to within 0.0091 a sample and 0.013 dB in any 20 ms. Once a node plays the sound itself, the whole file is decoded ahead again. - e2e 65: all passed with this change. - Counter-checks red as they should be: the library ignoring copies, the whole file always decoded ahead, clip copies only with Stream. Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> |
||
|
adminandClaude Opus 5.5
|
2764919bb8 |
Stream long sounds from an Opus copy instead of decoding them (#349)
A sound was decoded whole as soon as the project opened, in the editor and in a released game: five minutes of stereo held some 115 MB for as long as the page was open. A sound with Stream on now plays from a copy as Opus in Ogg, fetched a piece at a time and decoded a few seconds ahead by WebCodecs, so a game holds a few megabytes for it. - The Stream switch is a row of the sound, off by default. The Sound tab suggests it from a minute on and says how far the copy has got. - StreamKeeper makes the copies in the browser, a moment after the last change, one at a time: the sound's own and one per clip of its cut, fades and Reverse baked in. A copy that is no longer wanted is taken off and deleted once the project is saved without it. - streamTable says which played names stream from which copy. A clip without a fitting copy, a Sample and a Reverb impulse stay decoded. A sound with Stream on is never decoded ahead. - The page fetches by Range and takes the whole file from a server that ignores it, as the CI's PHP server does. It keeps the bytes and the first two seconds decoded, the rest goes four seconds ahead. - A jump decodes 32 packets before the place first. Measured in Chrome, what follows is then the same to the bit as decoding from the start. With 4 packets it was 0.06 off. - The stream-player on the FX worklet reads the samples at the rate of the context along a Catmull-Rom curve. What comes late is silent and skipped once it is there, so a clip keeps its beat. - The opening stretch goes with the player as it is made. Sent by message it came a few milliseconds late, and 557 samples of the attack were lost. - Pitch on a streamed sound is a shifter after the player, as on a bus: the length stays and it is heard 42.7 ms late. - Bakes of patterns and songs (#340) always stream now. - The song timeline draws a streamed sound from its copy decoded at 8 kHz, keeping only the peaks. Tests: - Gate: CHECK EXIT 0, 280 files, 4312 tests (31 new: ogg +3, stream-queue 6, streams 11, streaming 6, sound-library +5). - e2e 34: ALL PASSED, 106 checks (7 new). Five minutes of mono, 4.8 MB as WAV, 3.6 MB as its copy: streamed the renderer grows by 5.8 MB, decoded by 69.6 MB. Offline at 48 kHz, start, loop seam and a reversed clip are the copy decoded whole to the sample (0). - Counter-checks red as they should be: no pre-roll, no catch-up of late samples at the end, no opening stretch, a streamed sound decoded ahead. Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> |
||
|
adminandClaude Opus 5.5
|
84cd36f902 |
Bake a pattern or song to Opus, played in its place by a game (#340)
A pattern or song played by a game runs every note through the scheduler, the instruments and their FX, live. Bake works that out once, keeps it as a file on the asset, and Play pattern and Play song play the file instead, as one voice, for as long as nothing it is made of has changed. The tabs always play live. - Bake is an icon in the header of the Pattern and the Song tab, lit while the bake holds. A click bakes, cancels a bake that runs, or offers Bake again and Remove bake. The toolbar shows the progress. The info of the tab says "baked" or "bake outdated". - The bake holds everything up to the output of the pattern or song. The sound FX of the node, fx params, volume, fade in, bus, Master routing and stopping with a fade stay live. - A print of the worked-out plan decides whether it holds: notes and clips, tempo, length, loop, tracks, the build of each instrument for each note, sound FX, files, cuts and levels. A rename keeps it, an undo back to the baked state makes it hold again. - The file holds the straight run and then one more round of the loop as heard the second time, tails included. Looped, it plays to the loop end and then round that round, to the sample. Once, it fades out over its last 10 ms. Let ring fades it out over 0.3 s. - It is worked out by a second SoundLibrary on an OfflineAudioContext, its scheduler woken by suspends of the offline clock, and what reaches the master is taken. A worklet probe tells whether that was mono, so a mono bake goes on exactly as the notes did. - Opus in Ogg, 160 kbit/s stereo or 96 kbit/s mono, encoded with WebCodecs, the Ogg pages written by hand. Normalized to full scale, the peak kept and played back. - The file goes up into the sounds of the account as "[bake] name", which the sound picker leaves out. An old bake file is deleted once the project is saved without it. Only a bake that holds is loaded. - Ogg files are decoded at 48 kHz: resampled to 44.1 kHz, the loop of a bake lost a sample a round. - Baking and removing a bake are no undo steps, like the EQ's zoom. Findings: - Chrome's AudioEncoder refuses opus.format 'ogg' (NotSupportedError) but hands out the OpusHead with a pre-skip of 312 for 'opus'. - The Song tab's header is full at 1280 px: a captioned Bake pushed Fit off the tab. Hence the icon. Tests: - Unit: tests/core/ogg.test.ts (6), tests/core/bake.test.ts (16), four new in sound-library.test.ts, one in song-play.test.ts. One test cuts, reverses and fades a clip on a song's track: each change outdates the bake, each undo makes it hold again. - e2e 64 (melektaus-atx): ALL PASSED, 36 checks (6 new). Live and baked rendered offline differ by at most 0.06 dB over 114 windows of 20 ms, two loop ends among them. e2e 65 had no red check with the icon in its header. - Gate (melektaus-atx): CHECK EXIT 0, 277 files, 4281 tests. - Counter-checks: print without instrument builds, print taking the sound's file instead of the clip's cut, round taken from the first pass, bake voice without its looping source, Play pattern or Play song ignoring the bake: one unit test red each. Pre-skip set to 0: the e2e comparison 4.8 dB off, only that check red. Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> |
||
|
adminandClaude Opus 5.5
|
41af1a6e51 |
Refactoring round 11: drop what only tests asked of the EQ (#85)
Refactoring round 11 covers what came since round 10 ( |
||
|
adminandClaude Opus 5.5
|
687377682c |
Draw the EQ's curve in its node and a spectrum behind it (#375, #374)
Both were asked for in #367 "for later". The node of a Parametric EQ now shows its curve in small, and its tab shows what passes the node while it is seen. #375, the curve in the node: - NodeDef has an optional `picture`: a height, and shapes made from the settings as plain point lists (guide, area, line). It is general, the Parametric EQ is its first user. - NodeView draws it in a box below the rows, again only when the box or the settings change. A drag in the EQ tab changes them, so the node follows it live. - Without a band the box stays, flat on its 0 dB line, so the node does not grow at the first band. - The axes of the curve, `eqCurvePoints` and `fillShapes` move from editor/soundfx/eqView to core/soundfx/parametricEq. Tab and node draw the sum from the same function. #374, the spectrum: - A node marked `tapped` gets a `tap` stage in front of its own stages and one behind them when compiled, in a sound FX and in an instrument alike. Its id is asset and node, since a copied asset keeps its node ids. - A tap is a gain of 1. SpectrumTaps (new, viewport/spectrum.ts) holds the tap of every voice and bus while it plays. - While the EQ tab is seen, in the tab row or in a window, the taps of that node feed one analyser per side (8192 points). Nothing is made before a tap of the node plays, so no AudioContext is opened early. - The tab draws both behind the curve, on a scale of 0 to -96 dBFS: the sound coming in faint and grey, the sound going on in the colour of a sound port. The analyser smooths it, and once the sound has gone the sum still hands it silence, so it falls away. - Once the tab is not seen, Editor.tick lets the analysers go, like the meters of the Song tab. - A tap does nothing to the sound, so `stats().last.stages` leaves it out, and a bypassed EQ keeps its taps. Decided on my own: - Every sound passing the node counts: Play of the sound FX tab, an instrument's keys, a song, a run. The issue proposed that. - The spectrum has no labels of its own. Its scale is in the wiki. Tests: Gate (melektaus-atx) 275 files, 4247 tests (11 new), EXIT 0 e2e 34 (melektaus-atx) ALL PASSED, 98 checks (2 new), twice Counter-checks, each put back by copy and compared with cmp: - The node's curve drawn without its bands: 2 unit tests fail. - The spectrum without the loudest bin between two points: 1 fails. - SpectrumTaps.stop leaving the taps linked: 1 fails. - Taps that never feed the analyser: e2e 34 fails in exactly the spectrum check (frames 0). Run in the container only. The screenshots of the second run were looked at: the blip as one peak behind the curve, and the dip at 4 kHz in the node. Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> |
||
|
adminandClaude Opus 5.5
|
25084f8576 |
Refactoring round 10: split SoundLibrary, fold sound duplicates (#85)
Refactoring round 10 covers everything since round 9 ( |
||
|
adminandClaude Opus 5.5
|
db15422372 |
Keep a bus's level when a tab plays the first sound of a page (#369)
A bus of the mix played at full level, without its sound FX and straight into the master, until something on it changed. It happened when the first sound after loading came from the Song or Pattern tab. - `bus()` looked a bus up before it asked for the audio context. The context made then sets up the whole mix, this bus too, and `bus()` overwrote it with a fresh one at gain 1. - `setMix` does nothing for the same mix again, so the wrong bus stayed until the mix changed. - Since #368 the tabs play into the master, so it was the master's volume and FX that went missing on the first preview. - `bus()` now asks for the context first and looks the bus up after. Tests: - Unit sound-library, buses, master-routing: 139 green, 1 new. - The new test was red before the fix: mix:b at gain 1 into the master instead of 0.25 into mix:a. - Gate (melektaus-atx): CHECK EXIT 0, 274 files, 4231 tests. Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> |
||
|
adminandClaude Opus 5.5
|
af2312a5e7 |
Play every tab's preview straight into the master (#368)
Since #351 the tabs played their asset along its links in the Master routing, as the game does. A song linked into a reverb bus was heard through that bus while it was edited. A preview should sound like the asset itself, so the tabs leave the Master routing out again. - The Sound, Sound FX, Instrument, Pattern and Song tab play into the master. The sound FX of the asset still applies, and so does the master's own volume and FX. - Inside a song its own routing of tracks and sends still counts. - The game is unchanged: Play nodes go along the routing as before. Tests: - e2e 34 (melektaus-atx): ALL PASSED, 96 checks. The routing check now holds the mix of the two buses as before, and the Sound tab on the master with the bus silent. - Counter-probe e2e: the Sound tab along the routing again, the routing check red. - Gate (melektaus-atx): CHECK EXIT 0, 274 files, 4230 tests. Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> |
||
|
adminandClaude Opus 5.5
|
0e73fd85b9 |
Route sounds, songs and buses in one Master routing graph (#351)
A project bus could only go into one other bus, and a sound, an
instrument, a pattern or a song into exactly one bus. A shared reverb
needs a sound to go there in part and on dry at the same time. Instead
of a list of sends on every asset, the project gets one routing graph
like the routing of a song (#350), one level up.
- Menu -> Master routing opens a tab with one graph per project. It has
a node per sound, instrument, pattern, song and bus, named after its
asset, and one Master. Embedded assets have none, their song routes
them.
- The nodes follow the assets. Every edit settles the routing in the
same undo step (KeepRoutingCommand), so an undone delete brings the
links of its asset back. A new asset gets a node and a link to the
master. What went only into a deleted bus goes to the master.
- New nodes start in three columns: what plays, the buses, and the
master a row above, so no link into it runs behind a bus.
- Links are sends: -60 to +12 dB, and a Mode on links out of a bus or a
song. Out of a sound, an instrument or a pattern a link always takes
the sound after its volume and FX. Loops are refused.
- A node without a link is silent and says "Goes nowhere".
- The rows Bus and Into are gone. Play nodes with a picked bus still
overrule the routing.
- A click on a node shows its asset in the inspector, the Master shows
the master volume and sound FX. A double click opens the asset's tab.
- The graph lives in project.routing and is held to the assets when a
project is read, but nothing is added there. The editor adds the
nodes when it opens a project. An asset without a node plays on the
master, so old projects sound as before without a migration.
- In the mix an asset with one link at 0 dB goes straight into that bus.
A sound or instrument with more gets a bus of its own with the sends.
A pattern or song sends from the master of its playing, which is
where its Mode taps. Buses of the mix can have sends now too.
Found:
- The check "the scheduler plans a looped bar" in e2e 34 wobbles. It
failed in 2 of 5 runs here and in CI task 580 at
|
||
|
adminandClaude Opus 5.5
|
490fcba88f |
Meter each track and the song, and limit the output at -1 dBFS (#359)
A song could clip at the output without anyone noticing: a track and a sound item at +12 dB each add up to +24 dB. The Song tab now shows how loud each track and the whole song are, and a fixed limiter behind the master keeps every sample under -1 dBFS in the editor and in the game. - Each track head has a stereo meter up its right edge. The head is 190 px wide instead of 176. - Out sits in the corner above the heads, with the loudest peak since Play in dB. In the tab header it made the row too wide for a 1280 px window, and the inspector lost its fields. - The meters read AnalyserNodes beside the buses, one per side after a channel splitter, so a peak panned hard is not halved. They are tapped only while the song plays and its tab is shown. - A clip lamp lights past 0 dBFS and stays through Stop. The next Play or a click on the meter puts it out. - The meter of a track that mute or solo keeps from being heard is grey. - Music always plays through a bus of its own, with or without a sound FX. That bus is what Out measures. - The limiter is the one from #326 and needs the FX worklet. Until that is loaded the master goes straight out. - It is 5 ms late. latency() counts that in, so the playhead and the alignment of a recorded take follow it. - Unit tests build SoundLibrary without the limiter, as their wiring checks follow every node of a voice. - Out shows "-inf" while nothing was loud. The UI font has no infinity sign, which the font test found. Tests: - Unit meter-view 8 new, sound-library 112 (2 new), 3 counter-tests each red - e2e 65 (melektaus-atx): ALL PASSED, 55 checks (3 new). Out wrote +16.6 dB, behind the limiter the loudest sample was 0.8913 - Gate (melektaus-atx): 272 files, 4209 tests, one red in the font test. Fixed after it, then the font and meter tests ran green. Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> |
||
|
adminandClaude Opus 5.5
|
25c1d02b06 |
Keep the audio thread free of ended voices and too many vocoders (#356)
A song that had been played a few times in a long session stuttered at regular intervals until the page was reloaded. A quick run up the keys of a sampled instrument made every sound drop out for a second or two. Both came from work the audio thread should not have had. - Every worklet node of a voice listened on its port. Chrome never collects a port that is listened to, and through its listener not the voice either. Every node of the voice stayed on its bus and was worked on in every block. A way or stage on the worklet now closes its port once it ends or is stopped, and the processor closes its own side when it is told to stop. - A voice without echoes now leaves its bus as soon as its sound and what its stages hold back are through. Before, only a voice with echoes did. - At most 12 ways play through the pitch worklet at once. One more cuts the oldest in 10 ms, a note already let go before one still held. Each runs a phase vocoder, whose first block alone took 2.7 ms of the 2.67 ms a block has on stein2. - Play for the game ends everything the tabs play: the piece holding the transport and every key or preview (`stopPreviews`). - Closing a Sound, Sound FX, Instrument, Pattern or Song tab stops what it plays of that asset (`AssetTabEditor.closed`). - A preset in the Instrument tab plays nothing any more. With Audition on it is heard like any other change. - Test hooks: `__gm.instrument.play`, `__gm.sound.playing`, and `vocoders` in the stats of the sound library. Measured: - A copy of the project, its Song 2 played for 12 s and stopped, six times (Chrome on stein2, CDP WebAudio): before, 746 nodes were left after the first time and 4469 after the sixth, the load at rest grew from 0.01 to 0.06. After, 7 nodes are left every time (the master and one bus) and the load at rest stays at 0.01 to 0.02. - Pitch-player voices live in Chrome on melektaus-atx: 12 take 0.50 of the audio thread, 16 take 0.71, 24 take 0.99. 30 struck 40 ms apart held it at 0.99 from the first second on. Tests: - Unit sound-library: 110 green (3 new), 4 counter-probes each red - e2e 34 (melektaus-atx): ALL PASSED, 86 checks (3 new, 2 changed) - e2e counter-probe with game start and preset undone: their 3 checks red, and the old check of Play note in the game as well, which now counts on the preview being gone - e2e counter-probe with tab close undone: exactly its check red. A first form of it held a key and stayed green, since the keys let go of a held key by themselves once the tab shows no asset - Gate (melektaus-atx): 270 files, 4181 tests Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> |
||
|
adminandClaude Opus 5.5
|
7a17030472 |
Give every sound FX effect a Bypass and a Wet (#354)
A node could only be taken out of a sound FX by unplugging it, and only six of them could be blended with the sound they get. Every effect now has both, in the sound FX graph and in the instrument graph alike. The Mix, the Input and the Output have neither. - Bypass is a checkbox setting. A bypassed node is left out when the graph is compiled, so it costs nothing and holds nothing back. The graph draws it faded, and its body says "Bypass: true". - Wet is a number input like the others. It can be a parameter, be moved by Set sound FX parameters and, where the node allows it for its other numbers, follow an Envelope. - A blend is a stage of its own (`wet`) around what the node adds. The sound as it came in is held back as far as the node is late, so a Compressor, a Limiter or a Vibrato do not comb it out. - The six nodes that had a Mix keep their key `mix` and only call it Wet. Saved values, parameters and edges stay as they were. - The Delay crossfades now: the sound alone at 0, the sound and its echoes in full at 0.5, the echoes alone at 1. Before, the sound was always in full and `mix` was the echoes. - The Pitch takes its semitones by Wet instead of blending, through a share `times` on the amount that an instrument binds as well. Findings: - A Delay saved before this sounds different. It sounds the same at half its old value. The two chip presets with a Delay (Echo Lead, Bell) are halved to keep their sound. - Project cbbf160bb7e8 has two Delays (mix 1 and 0.5). They are left as they are. Tests: - Unit: soundfx 65 (8 new), sound-library 107 (3 new), instrument 35 (1 new), envelope 13. Two delay tests and the filter ports test follow the new numbers. - Counter-checks: 8, each turns its test red. - e2e 34 (melektaus-atx): ALL PASSED, 83 checks (2 new). The ping-pong check at wet 0.25 measures what it did at mix 0.5. - Gate (melektaus-atx): CHECK EXIT 0, 268 files, 4154 tests. - After the gate the derived ports of a blend are asked for once instead of twice: typecheck, lint and the three unit files green again (113 tests). Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> |
||
|
adminandClaude Opus 5.5
|
a295d233ed |
Give sounds, instruments, patterns and songs a sound FX (#352)
A sound FX could only be picked where something was played: on a Play
node, a track or an item of a song. A sound that should always sound
through the same effect needed that pick everywhere it was used. Now
the asset says it once, and every place that plays it follows.
- New row Sound FX on a sound, an instrument, a pattern and a song,
right before Bus. A sound goes through it on every voice, an
instrument on every note after its graph, a pattern on all its
notes together and a song on its output.
- The fx input of Play sound, Play note, Play pattern and Play song
and the Sound FX of a song item now read "From the asset" while
empty. None is a pick of its own, stored as `#none` like `#master`.
A pick replaces the FX of the asset, it does not come on top.
- A pattern item's Instrument reads "From the asset" instead of None.
The meaning is unchanged.
- A double-click on a sound item opens the sound, as one on a pattern
item opens the pattern.
- The tabs play through the FX of their asset. The Pattern and Song
tab put it on a bus of their own between the output and the bus of
the asset. The keys of the Pattern tab play there too.
- Notes of a pattern or song go through the FX of their instrument.
Its chain is loaded with the other needs of the sequence.
Decided without asking:
- Old items and Play nodes with an empty fx now mean "From the
asset". No asset has an FX yet, so nothing sounds different.
- The label is "From the asset" as on Loop and Bus, not "From asset".
- A sound used as a Sample, as the impulse of a Reverb or as the test
sound of the Sound FX tab plays without its own FX.
Findings:
- In e2e, `__gm.inspectorField('Sound FX')` and `('Instrument')` find
the group of the Assets panel first. The check asks for the last
match.
Tests:
- Unit asset-fx (new): 8 green. Six counter-checks each turned red.
- Field lists of sound, pattern and song: Sound FX added.
- e2e 65 (melektaus-atx): ALL PASSED, 46 checks (3 new). Counter-check
without the FX bus of the tab: that check red.
- Gate (melektaus-atx): CHECK EXIT 0, 268 files, 4142 tests.
- Not checked: how it sounds, the Sound, Instrument and Pattern tab
in the browser.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
|
||
|
adminandClaude Opus 5.5
|
d349251a01 |
Put a sound in a room, a hall or a cave with a Reverb node (#328)
A sound FX had no space around it. The Reverb node folds the sound with an impulse response: one it makes itself, or a sound asset as the answer of a real space. It works on a voice and on a bus. - Type: Room, Hall, Cave and Plate have fixed numbers. Custom shows Decay (up to 10 s), Damping and Pre-delay. Sound shows the pick of a sound asset and Pre-delay. The rows are derived ports, the sound pick an idle param, so they only appear for their type. - The made impulse response is seeded noise per side, 60 dB down at Decay, through a low-pass closing from 20 kHz toward 500 Hz as far as Damping says. It is made once per rate, decay and damping, the last 16 are kept. - A sound as impulse response: the sound FX compilers now get the project, so a node can turn a sound asset into its file. The build key holds that file, so a cut or swapped sound builds again. The instrument compiler does the same for a Reverb inside an instrument. - The library loads that file with the voice, a sequence or before a bus builds its chain. A missing file leaves the reverb silent. - Mix blends dry and reverb and is the only number that moves while the sound plays, as the issue said. The voice rings for pre-delay plus decay, or as long as its sound. - The open point from #325 about sends on project buses is #351, not part of this. Tests: - Unit reverb (new) 4, soundfx 57 (4 new), sound-library 104 (2 new), green. - Counter-checks, each turns one test red: the impulse file not loaded with the voice, the tail without the length of the sound. - e2e 34 (melektaus-atx): ALL PASSED, 81 checks (1 new). Chrome offline: silent during the pre-delay, 35.9 dB fall over 0.6 s of a 1 s decay (36 expected), the dry half at 0.25 for mix 0.5. A sound with one sample at 0.2 s gives the impulse back 0.25 s later and nowhere else. - Gate (melektaus-atx) over the end of this series #318 to #328: CHECK EXIT 0, 267 files, 4134 tests. Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> |
||
|
adminandClaude Opus 5.5
|
071f194326 |
Swing the volume or the pitch with Tremolo and Vibrato (#320)
Alarms, sirens and wobbly retro sounds need a volume or a pitch that swings. Two new nodes do that, on a voice and on a bus alike. - Tremolo: Rate (0 to 20 Hz), Depth (0 to 100 %), Shape (Sine, Triangle, Square, Saw). The volume swings between full and 1 - depth. - Vibrato: Rate (0.5 to 20 Hz), Depth (0 to 4 semitones), Shape. The shape is the curve of the pitch, a Square jumps between two pitches. - As the issue decided: two nodes, phase 0 on the first sample of the voice, no fade-in time. Both run on the FX worklet, the classes are in lfo.ts and tested in Node. - Deviation from the issue text, as in the plan: the Vibrato is a delay that swings, not playbackRate. A bus has no playbackRate, and the sound keeps its length. - The delay swings around a center taken from the start values. The center counts as the latency of the node, so a voice starts that much earlier and a Mix and a bus make up for it. - Known limit, in the node text and the wiki: a depth turned up or a rate turned down after the start asks for a delay below 0. The lower half of the swing then flattens. Finding: the first e2e run was red at the edge of a window. The phase is summed up, so the square flips one sample later than 2400 steps of 10/48000 suggest. The check keeps 10 samples away from the edges. Tests: - Unit lfo (new) 5, soundfx 53 (2 new), sound-library 102 (1 new), green. - Counter-checks, each turns one test red: the swing turned over (up and down swapped), the start time not passed to the worklet. - e2e 34 (melektaus-atx): ALL PASSED, 80 checks (1 new). Chrome offline: Tremolo square silent before its voice, then 0.5 and 0 for 50 ms each. Vibrato square at 5 Hz, 1 semitone: 1059.5 Hz and 940.5 Hz. - The gate runs once on the last commit of this series. Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> |