The corner tables are now derived from rmmz_core.js (Tilemap._addAutotile,
FLOOR_AUTOTILE_TABLE, WALL_AUTOTILE_TABLE): the fill quadrants are taken
rotated by half a tile so that neighbouring tiles meet with the quarters that
sit next to each other on the sheet, and the inner corners come from the upper
right tile of the block, not the upper left one. A test pins the model against
both MZ tables, generated from rmmz_core.js rather than typed out.
The animation check in e2e module 39 read its four pixels one by one and could
straddle a frame change; step and pixels are now read in a single call.
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
Stop animation gets a blend (s) port that fades the animation back to what
lies underneath. Play animation gets blend out (s) for Once (reset) and a
restart port that starts a running, paused or fading animation from frame 0.
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
The Animation tab shows the root asset over the timeline, with every row's value at the
playhead written onto a copy of it – the sprite, text or container placed at the origin as a
scene would place it, a scene as itself. Rows reach the root through that placed object and its
children through the object's instance edits, the route a placed container's content takes,
so the ids match what the runtime gives them. The runtime player and the preview evaluate a row
through one function (trackWriteAt), relative rows included; past the end of a once-reset pass
the preview shows the starting values, as the player would. Play, pause and the ruler drive the
preview through the timeline's playhead; a drag pans, the wheel zooms, Centre frames it. The
document is never touched and undo never hears of scrubbing.
On animation finished no longer describes itself as hearing "a sprite of the owner".
Co-Authored-By: Claude Fable 5.1 <noreply@anthropic.com>
Play, Pause and Stop animation take the animation on a port instead of a
fixed setting, fed by the new Animation literal or a list item tagged
`$animation`. Playing an animation already running keeps its frame but
counts it as started last, so turning back to a walk that never stopped
shows that walk. The actor demo walks through one Play animation over
`ItemAt(walk, facing)` again and stops every animation to stand.
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
Part (a) of the animation rework: model, commands, saving, runtime and nodes.
- AnimationAsset holds a root (sprite, text, container or scene) and rows; a row keys one
property of the root or of an object inside it, keys sit on whole frames.
- The last key decides the length (its frame counts as a frame of its own). The playhead runs
between frames, so numbers and colors blend every tick even at 10 fps; everything else holds.
- Playback gains `once-reset`, which puts back what was there before the start. A row can be
relative, adding to where its target stood.
- Play / Pause / Stop animation act on an object; each instance plays on its own, the later
start wins on a shared property, and a behavior writing the same property still writes last.
- A sprite no longer wears an animation through `texture`. "Create animation from texture"
builds a sprite plus a texture row keyed frame by frame instead.
- The Animation tab shows a placeholder until the timeline editor (part b) lands.
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
The fill of a sliced frame defaulted to `Stretch`. It is `Repeat` now, and the Fill dropdown lists
`Repeat` first.
The saved document keeps writing only the fill that differs from the default, so the key it
carries is now `stretch`, and a frame without it repeats. A frame saved before with the key
absent and meaning stretch would therefore tile; none of the stored projects has one - both sliced
frames on the server carry `fill: "repeat"` explicitly, so they draw as before.
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
A sliced frame drew its borders one source pixel to one sprite unit. Pixel-art sheets are small:
a 16px corner on a 400-unit button is a thin line, and the only way around it was a larger image.
The texture now carries `Nine-slice scale` (default 1), next to `Filter`. It sets how many sprite
units one border pixel takes, for every sliced frame of that texture. The UVs stay as they are -
a corner shows the same pixels, only larger or smaller. When the sprite is too small for both
borders they are still scaled down together, now starting from the scaled size. With `Repeat`
the tile size scales too, otherwise a doubled border would sit beside a pattern of the old size.
The value is a schema row, so inspector field, saving and undo come without their own code.
Anything that is not a size above 0 reads as 1, and documents without it draw as before.
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
Refactoring round one: HttpFontStore/HttpSoundStore/HttpTextureStore collapse into a generic
HttpFileStore over a FileStore contract; fontImport/soundImport/textureImport share assetImport
with an ImportKind per sort; ImagePicker/FontPicker/SoundPicker sit on FilePicker and describe
only their row. The group/comment drag logic leaves GraphCanvas for annotationDrag.ts (with its
own unit test), declaredRows.ts replaces the duplicated row build in particles.ts and shaders.ts,
and dead code in font/sound/compile/emission/transform/actions is gone. README: asset list,
check count 958, the two-job CI, the Scenes wiki page.
Co-Authored-By: Claude Fable 5.1 <noreply@anthropic.com>
TextureFrame carries optional `border` (left/right/top/bottom) and
`fill` (stretch | repeat); absent keys mean "not sliced", so no format
bump and undo restores the plain frame instead of four zeroes.
The sliced sprite builds its own geometry instead of the shared
UNIT_QUAD: a 4x4 grid, and for `repeat` one quad per tile carrying the
frame cell's real UVs -- tiling in the geometry, not in the sampler, so
a frame out of a sheet cannot pull its neighbour in. Above 64 tiles per
axis it stretches, to bound the buffer.
A sprite narrower than left+right scales both borders down together
until the middle is exactly 0, so the corners meet at a seam and never
overlap.
The texture editor gets four draggable border lines plus the same four
numbers in the inspector. Hit order is resize handles, then the lines,
then the frame body -- handleAt reports 'move' anywhere inside a frame,
so lines placed after it were unreachable.
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
Load scene sets a flag on the World like Stop and Restart do; the swap
happens after the tick, and the last wish of a tick wins. Exactly one
thing crosses over: the SharedState, so global variables and global
machines keep what they know while everything local is built anew.
Loading the scene that is already running rebuilds it, which is what
"reset the level" means when the score must survive.
A run starts either from the start scene (a new project field, set from
the asset panel and marked with an arrow in the list) or from whatever
scene is open. The toggle next to Play says which question is asked and
remembers the answer in localStorage: it is a way of working, not part
of the game.
Sounds no longer end because a scene ends. A voice belongs to the
behavior that started it and stops right after On destroy, so the scene
swap is no longer a special case at all. For the enemy that plays its
explosion and destroys itself in the same breath there is now a
detached input on Play sound.
The scene selector stays usable while a run plays, because a double
click in the asset panel already did the same thing unguarded. It moves
what the editor looks at, not what the run plays.
Sounds follow the road fonts already paved: the file goes to the server
content-addressed under its sha256, the project keeps a named asset that
points at it, and nothing is ever re-encoded. The format is read from the
file's own signature, not from what the browser claims - the same .m4a
arrives as audio/mp4, audio/x-m4a or as nothing at all.
Playing is two nodes. "Play sound" takes the asset and may raise or lower
its volume; every call is its own voice, so two jumps in a row are two
jumps heard. Its loop input is a choice of three - from the asset, on,
off - because a checkbox has to spend one of its two positions on "not
set" and would lose a case: an asset that loops could then never be
played once.
Below the graph core stays browser-free: NodeContext hands out an asset
id, BehaviorSystem resolves it against the project and folds the asset's
own volume and loop into the call, and only viewport/SoundLibrary knows
about Web Audio. A run without a sink plays nothing instead of throwing.
The CI browser is muted, so the ear is no witness: the debug hook counts
started and stopped voices, and step 34 reads that counter.
Four issues that all reach for the same line: how the current state is
read and written. Splitting them into four commits would mean four
states of the tree that do not compile, so they arrive together.
#55 start state — the machine asset carries an optional `start` holding
a State node's id. Right-click a state to set or remove it, a ring in
the node's title says which one it is. A dead id (the state was deleted)
reads as "no start", so nothing has to clean up after a deletion.
#53 entered/exited — `On state entered` and `On state exited`, one exec
output per state. Every change now goes through a single `setState`
that reports it; BehaviorSystem delivers it after the exec flow that
caused it, `exited` of the old before `entered` of the new, round after
round until the queue is empty, with a cap that stops a ping-pong graph
with an endless-loop error. A local machine tells the instance that
switched, a global one tells every instance holding a matching event
node. The start state fires `entered` too: per instance for a local
machine, once per run for a global one.
#57 reading — `Current state` with `name` for showing and `id` for
comparing, `Is in state` with one boolean per state. Neither has a
`run`, so `read` learned `def` and `lookup`, and the catalog test knows
this third kind of node.
#54 seeing it — during a run the state machine tab marks every state
some instance is holding faintly, and the one held by the selected
scene object's instance strongly.
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
This reverses the design of the previous commit. `PropertyDef.scope` is gone
without replacement: a behavior variable is an object property again, without
exception, and sharing is something you point at rather than something you
declare twice.
A **Variables asset** is declarations and nothing else -- no graph, no position,
never placed, no tab of its own (`TAB_OF_ASSET` is already `Partial<>`, so that
costs no line). A `Variables` node names one through its new `variablesAsset`
setting, empty meaning the behavior's own variables as before, and then reads
and writes one value per key for the whole run. Its property list follows the
chosen source, which was the actual request: a value another graph declared is
now offerable, where before every participant had to declare the name itself.
That deletes more than it adds (-72 lines net): `globalConflicts` and its
run-stopping kind clash, `SetVariableScopeCommand`, the scope picker, both
object-inspector filters and the "shared by the whole run" note on the placed
object. A typo is no longer a silent second variable -- naming an asset is
picking from a list. And two Variables assets may carry the same key without
meeting, because the asset is the key, not the name. The one shape it copies is
the one that already existed: `Set state` picks its machine the same way.
Lifetime is unchanged. The bag is built at `BehaviorSystem.start()` from the
declarations and never written back, so playing in the editor cannot change the
project -- which is the whole reason a counter must not be an object property
(`World.syncToModel` would `commit()` it, and the coin counter would stand at 7
for good).
Full symmetry across that gap, without mirroring anything. Two named wires:
`Inspector.liveVariables` shows the values as they stand while a run is on and
falls back to the declarations when it ends, and `adoptDeclarations()` takes a
key into the run *only where the document changed it since the last sync*.
Without that condition any unrelated project edit would snap a running counter
back to its starting value; a counter-test bends exactly that and falls over.
Nothing was ever cached, incidentally: `GraphInterpreter` only pulse-caches
nodes without a `read`, and the variable node has one. The wire was missing.
The state machine `Scope` row is now an ordinary `enum` row through
`createFieldRow`. It was hand-built from an `HStack` with a ghost dropdown and
began ~34px left of every value above it; the explanations beside `Local` and
`Global` are gone from the menu, the sentence below the row keeps saying it.
Machine scope is otherwise untouched -- `StateMachineAsset.scope`,
`SetMachineScopeCommand`, `stateBag()` and its persistence all stand, so #59
stays closed as built and `Scope` as a type now carries machines alone.
Six counter-proofs, each biting at its own guard. One of them did not bite at
first: the suggestion list was computed twice, in `nodeSection` and
`portSection`, so only the browser test covered the request itself. It is one
named function now, `variableChoices`, with a unit test of its own.
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
A variable or a state machine declared `global` keeps one value for the whole
run instead of one per behavior instance. The scope sits on the declaration --
`PropertyDef.scope` and `StateMachineAsset.scope`, both optional, absence
meaning `local` -- and `local` is never written, so every project made before
this saves back unchanged.
**The name is the key.** Two behaviors declaring a global `score` mean one
variable; a behavior declaring `score` locally keeps its own. Kinds that
disagree about one global name stop the run before it starts, with the two
behaviors named; starting values that disagree are a warning on the behavior
that declares it, and the first declaration wins (`globalConflicts`).
The runtime needs no redirection layer. A global variable falls out of
`schemaForObject`, so it never reaches `entity.props` -- and then the whole rule
is "whoever declares the name takes their own value" (`graph/sharedState.ts`).
The `Variables` node is untouched and stays transparent: switching a variable to
global breaks no existing graph, because `GraphInterpreter.readAll` builds a
fresh object per read anyway and only asks `port.key in all`.
That same cut answers the inspector. A shared value has no owner, so the placed
object shows no row for it and can hold no override -- `SetVariableScopeCommand`
takes the deviations that were there and undo gives them back.
Both places say it in words rather than leaving a glyph to be guessed: the
declaration explains the mark below the list, and the placed object names the
variable it no longer holds instead of claiming the behavior declares none --
which is what it said before, untruthfully. Screenshots of the e2e run turned
that up; no check had been looking at it.
`SharedState` hangs off `NodeContext`, is built in `BehaviorSystem.start()` from
the *declarations* rather than from any instance (a global variable exists
before its behavior is placed), and is thrown away with the run: nothing is
written back, not even in the editor run. `GraphInterpreter.call` passes it on
through `...ctx` while nested calls keep getting fresh local variables, which is
why `program.defaults` is stripped of global keys.
Two traps this hit. `defSignature`/`assetSignature` have to carry the scope or
the inspector does not rebuild after the switch -- and a state machine has no
rows at all, so its scope is appended to the signature by hand. And the object
inspector does not go through `schemaForObject` for behaviors, it reads
`asset.variables` directly; filtering in one place was not enough, and no unit
test covered that path. The e2e caught it (`global: true` where false belonged),
and the rule now lives in one named function, `objectRows`.
Scopes `object` and `scene` are deliberately not built. The object case already
has a route (`Object by name` -> `Properties`), and a run knows exactly one
scene, so `scene` would be indistinguishable from `global` until #39 exists.
Closes#59: a machine's scope is a word on the machine asset, not a setting per
`Set state` node, so the same machine cannot live in two places at once.
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
A state keeps its `in`/`out` exec pins in the model and the editor never draws
them. That is the whole trick: connecting, undo, deleting a state and saving all
keep working untouched, because `normalizeGraph` filters nodes and never edges,
and no edge ever checks its port key against a NodeDef. Only two places change --
`NodeView.redraw` stops drawing the row, and `portAt` refuses to hand one out, so
an invisible pin cannot be grabbed either.
Transitions are drawn by right-clicking a state, `Make transition`, then clicking
the target. The armed mode takes the same shape as a live drag, so the existing
preview draws it with no second code path, and it dies with Escape, a click on
empty canvas or a switch to another asset.
Removing the pins removed the only handle a transition had: edges have no
hit-test anywhere, and the pin right-click was the sole route to Disconnect.
The inspector's TRANSITIONS OUT / TRANSITIONS IN lists are therefore not a
convenience, they are the delete path.
`GraphEdge` gained an optional `label`, which `normalizeGraph` has to pass
through explicitly or a saved name is dropped on load. `State transition`
replaces `Next state`: it takes the machine on an input port and the name from a
picker, and resolves against the *current* state. Names are deliberately not
unique across a machine -- two states may both have an `alarm` -- so a node named
`alarm` moves whichever state has one, and an empty name follows the single
unnamed edge.
The geometry moved to a Pixi-free `transitions.ts`: a gap to the box border, and
a fan that puts a pair of opposite edges beside each other instead of on top of
each other. Keeping it as plain maths is what let a screenshot bug become a unit
test -- an earlier pin-to-pin line ran under the target node and took its
arrowhead with it, because `nodeLayer` sits above `edgeLayer`.
One limit stands and is not fixed here: `ConnectCommand` rejects a second edge
between the same two states ("Already connected"), because every transition
hangs off the same two ports. With names, `A --alarm--> B` beside
`A --seen--> B` is a sensible pair, so this is worth its own issue.
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
Behavior and Container draw an icon because isSymbolType() is true for them,
but that predicate does not mean "draws an icon" — it means "is editor
decoration". Four places read it that way: collectWorldItems, GameViewport.
collectFrame and syncDrawOrder all drop symbols out of the running world and
the game picture, and placementOf() gives them an upright unscaled box.
Listing 'particles' there would have handed the source an icon and taken away
its particles, in the scene view as well as in the game.
So the two questions are two functions now. hasSceneIcon() says a type draws
an icon; isSymbolType() keeps meaning decoration. The icon itself is a
SceneViewport decoration, which is editor-only for free because GameViewport
never syncs decorations.
A ring (r 10, #c26a1f) with four sparks, upright and unscaled like the other
symbols, its middle left open — unlike Behavior and Container a source draws
something of its own, and the field is densest exactly there. The name sits
beside it and a dashed line runs to the parent, same colour.
Found while writing the tests: the source's grab box scaled with its transform
while the icon did not, so the two came apart. placementOf() returns only the
translation for 'particles', making the box the upright 24 x 24 that covers
its icon. The source's own transform still feeds every particle untouched.
824 checks (821 + 3).
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
The asset type `particles` is placeable and carries a graph at the same time —
`behavior` was the blueprint. Because a continuous emitter gives birth to particle n
at time n/rate, the whole field is a function of the clock rather than of the frames:
no ring-buffer bookkeeping, exact time jumps, reproducibility as a measurable property.
compile.ts follows compileShader's frame but emits JS closures into a Float64Array
instead of GLSL, and without eval; a node with two consumers is evaluated once.
Drawing is one Pixi ParticleContainer per source, so one draw call.
Collision, wind and braking in flight are out for good — that is the price of the
formula model, not an omission.
The tab count goes from nine to ten, which is exactly the case #84 was built for one
day earlier: at 1280 px the row no longer holds every tab, so guard 14b now asks for
hidden.length > 0 instead of === 0.
A font asset holds a file and nothing else, the twin of a texture: the server keeps it
content-addressed under data/fonts/{sha256}.{ext}, with the format read from the file's own
four-byte signature (finfo reports fonts inconsistently across libmagic versions). A text
wears one through its ordinary Font property, so overrides, reset, undo and the Properties
node come for free; no font means the editor's own typeface.
The picker lists everything the server holds and renders each row in the face it offers.
The family name is gm-font-<hash16>, never the name inside the file, so two "Regular" cannot
collide. WorldViewport.syncText is the single place that draws it, which covers scene, game
preview and play at once.
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
Four new rows on sprite, text, collider and container (block TRANSFORM):
scale, rotation in degrees clockwise, mirrorX, mirrorY. As properties they
get override/reset/apply, loading of old projects, write-back after play and
the Properties node for free; camera and behavior have none.
The hierarchy composes T*R*S per level (composeAlongChain replaces
sumAlongChain), so children rotate and scale with their parent. Reparenting
and grouping keep the look (carriedTransform). Drawing goes through
placeNode, the gizmo is a polygon, cull and objectRect use the AABB, drags
are computed in the parent's system.
Colliders are oriented boxes: SAT for box/box, box-circle in the box frame;
exitDistance replaces axisSeparation/axisCorrection, moveAndSlide moves along
the object's own axes.
Co-Authored-By: Claude Fable 5.1 <noreply@anthropic.com>
A shader is an asset carrying a node graph (Texture color, Output, Property,
Color, Add/Subtract/Multiply/Divide, Mix, Luminance) that compiles to the GLSL
fragment of a Pixi filter. The Shader tab reuses the Behavior canvas; a sprite
wears a shader through its Shader picker, and the rows below it are the
graph's Property nodes. Property schema, resolution and deviation take the
project because a sprite's rows now live in another asset. The built-in
registry of the prototype is gone; "Adjust colors" ships as a graph in the
fixture and the three example games.
Co-Authored-By: Claude Fable 5.1 <noreply@anthropic.com>
A state machine is an asset whose graph holds one `State` node per state
(no ports, name as title), edited in a new "State machine" tab that reuses
the graph canvas: right-click places "State n", snap toggle shared with the
Behavior tab via SnapToggle. `statemachine` is a value kind like texture
(port, literal node, variable, struct field, tagged list item).
Behaviors use it through `State branch` (one exec output per state) and
`Set state` (one exec input per state; the interpreter now hands `run` the
entry port). States live per behavior instance in NodeContext.states, with
no initial state. Ports derive from the inline picker or a wired
`State machine` literal; BehaviorLookup became GraphLookup with
behavior(id) and machine(id).
The Graph tab is labelled "Behavior" (key unchanged). Unit tests
(state-machine, kinds, catalog, ports), e2e step 26 and README added.
Co-Authored-By: Claude Fable 5.1 <noreply@anthropic.com>
- `.gitignore` said `index.html` unanchored, which also caught the Vite source page;
a fresh clone could neither `dev` nor `build`. Anchored to `/index.html`, page added.
- Removed GM_REMOTE (tools/remote/gm-browser.ps1 and the ssh/scp branch in browser.mjs):
the Windows test machine is gone and the only flaky check that lived on it is closed (#37).
- Removed `npm run preview`, undocumented and unused.
- Comments: wrong number in collider.test.ts (250 → 200), the "declarations used to…"
history in listItems.ts and friends, the 24 px/28 contradiction, section banners in
nodes/index.ts, node-catalog.test.ts and api/index.php, name paraphrases, and the stale
step numbers in tools/e2e/11-…23- from the old global count.
- README: asset types include `animation`, kind order Number/Text/Boolean, tagged colour
and texture items, 6/5 kinds, the `Texture` node, `./build.sh`, PROJECT_FORMAT_VERSION,
and the file tree (kinds.ts, listItems.ts, propertyPorts.ts, Breadcrumb.ts, beads.ts,
tools/assets/).
- tests/helpers.ts takes the duplicated `findObject` and `sceneWithCamera`.
Proof: ./check.sh 797 tests, full e2e ALL PASSED 633 checks against this bundle.
Co-Authored-By: Claude Fable 5.1 <noreply@anthropic.com>
A kind like colour or texture used to be spelled out in five parallel
lists, its port type, its empty value, its glyph, its label and its list
tag - 22 literal places for texture alone. core/properties/kinds.ts now
holds one row per kind and the rest is derived from it, so adding a kind
is one row. The five literal nodes collapse into literals.ts, the six
kind menus into one helper.
Number, Text, Boolean is now the one order everywhere; the variable and
port menus used to list Boolean before Text.
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
- `Texture` and `Color` can be picked as a variable kind, a struct field
kind and a declared port kind; a new `Texture` node hands a picture id
into the graph. Declared, a texture is its bare id – the `$texture` tag
stays a list-only thing.
- The `String` node is labelled "Text" like its kind; the type id stays.
- Whole-number inputs (`Item at`, `Set item`, `Sub list`, `Fill`,
`Repeat`, `Substring`, `To text`) show no decimals (`int()` in shared.ts).
- All server projects are reseeded, so `legacyNodes.ts`,
`migrateDeclaredLists` and the `ownerId` fallback go, with their tests.
- Note `reseed-because-of-list` moved to done/; new note `refactor-types`.
Co-Authored-By: Claude Fable 5.1 <noreply@anthropic.com>
adminandClaude Opus 5