169 Commits

Include renames

Author	SHA1	Message	Date
adminandClaude Opus 5	f4ec23d3d3	Colliders take a frame's outline and tiles have their own surface (#193) ... Issue #193 asked where friction, bounciness and density of a tile live. Tiles had a fixed surface (friction 0.5, bounciness 0) and a collider could not use the outline drawn on a texture frame (#141). Both gaps are closed here. - A collider has a fifth shape "Frame collision" with a Frame row. The frame is picked like a sprite's texture and stored as the value 'frame'. - The shape is linked, not copied. Redrawing the outline in the texture tab changes every collider using that frame, in the editor and on the next play. - The frame centre sits on the collider origin, one image pixel is one unit. The shape turns, scales and mirrors like any other. - Every outline ring blocks. Each ring is split into convex parts the same way a polygon is. - Without a frame, with a whole texture or with a frame that has no outline, the collider is drawn red as a box and blocks nothing. - Move, Rapier, raycast, detection, hit test, drawing and footprint all resolve the frame. At runtime an entity looks the frame up live in the current project. - A tile has Friction and Bounciness next to Solid and One-way. The rows only show when Solid is on. Defaults and mixing rules match the collider. Density is left out because a tilemap never moves. - Tilemap cells are grouped by surface as well as by one-way angle. Ice and stone never merge into one rectangle, and every cell brings its surface to Move and Rapier. Findings: - A tile with a collision scale below 1 is no longer flush with a neighbour of another surface. It is inset there like at an open side, the same as next to one-way tiles today. - A bounce test first measured 0.84. The ball had landed on the hero at the origin, not on the tile. On the tile it measures 0.993. Tests: - ./check.sh: 130 files, 1931 tests, exit 0 (was 129 / 1917). - 14 new unit tests in tests/core/surface.test.ts. The Move tests run against the editor run and the physics system. - 3 new e2e checks: 40l (surface rows follow Solid), 42e (collider has frame size, a walker climbs the slope in the frame). - GM_STEPS=1-8,39-43 freshly seeded: ALL PASSED, 376 checks. - Three counter-probes bite: Move ignores the tile surface (2 fail), Rapier ignores it (1 fails), frame shape falls back to a box (5 fail). - Check sum 1198 is computed (1195 + 3), the full run belongs to CI. Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>	2026-09-21 07:29:26 +02:00
adminandClaude Opus 5	3ff7e91dbf	Vector art points have four types and the pen draws whole curves (#195) ... The pen only pulled out the outgoing handle of a new point, because the opposite handle was mirrored only if it already existed. The first segment of every dragged point was therefore half a curve. Beyond that bug, a point had no way to say how its handles relate. - A vector point has an optional mode: straight, corner, smooth or symmetric. Missing means corner. The mode is not part of the fingerprint, because it changes no pixel, only the next drag. - Dragging a handle follows the mode. Corner leaves the other handle alone, smooth turns it along and keeps its length, symmetric mirrors it exactly. - The pen pulls out both handles mirrored and marks the point symmetric. A plain click still sets a point without handles. - The tab header has a "Point: ..." menu for the last clicked or set point. That point is drawn filled. Changing its type is one undo step. Text instead of four icons, because the UI kit has no tooltips. - Switching a point without handles to a curved type first grows handles along its neighbours. Smooth and symmetric line the handles up and keep the rough direction of the curve. - A point inserted on a curve is smooth. Symmetric neighbours become smooth, because the split shortens one of their handles. - Alt-click still toggles between straight and symmetric. Found on the way: the old Alt rounding took the point at the other end of an open line as a neighbour, so its handles came out skewed. Fixed and held by a unit test. Existing points with handles now count as corner. Before, every drag mirrored. No pixel changes, only the next drag behaves differently. Tests: - ./check.sh: 129 files, 1917 tests, exit 0 (before 1903) - GM_STEPS=47, freshly seeded: ALL PASSED, 39 checks (before 32) - Check sum 1195 in README and wiki is computed (1188 + 7), CI measures it - Counter-checks: pen without 'symmetric' fails 3 checks, no smooth branch fails 1 unit test and 1 e2e check Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>	2026-09-21 06:51:35 +02:00
adminandClaude Opus 5	90627ccf47	Snap is a magnet button in every graph and vector art tab (#194) ... The snap toggle was a checkbox with the word "Snap" next to Fit, and the vector art tab had its own "Grid" button for the same idea. Both now share one square icon button, so snapping looks and works the same wherever it exists. - SnapToggle is a square toggle button with a magnet icon and no text. It lights up blue when snapping is on, like the other toggle buttons. - The magnet is drawn with cubic curves instead of arcs, because the Pixi SVG parser draws arcs as jagged edges. - The vector art tab drops its Grid button and uses the same SnapToggle. It still snaps to 8 px, the graph tabs to 24 px. - SnapToggle accepts anything with setSnapping(on). The vector art canvas method is renamed from setSnap to setSnapping for that. - Every tab exposes the button as __gm.<tab>.snapButton(). Modules 06, 26 and 36 click through that hook instead of the label "Snap" plus 30 px. Tests: - ./check.sh: 129 files, 1903 tests (was 128 / 1897) - 3 new tests in tests/editor/snap-toggle.test.ts, 3 in the icon tests - GM_STEPS=1-6,26,36,47 fresh: ALL PASSED, 346 checks - GM_STEPS=47: ALL PASSED, 32 checks (was 29) - Counter-checks: toggle not switching its target fails 2 unit tests, the canvas ignoring the switch fails module 47 - Check total 1188 in README and wiki is computed (1184 + 4), the full run is left to CI Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>	2026-09-21 06:25:56 +02:00
adminandClaude Opus 5	ad62a0f525	A vector art asset can be made and used without touching the model (#129) ... Stage 5 closes the loop that the earlier stages left open: every check so far put the shapes into the project with mutate, because the tab that draws them came later. Block 47f now walks the path a user walks - the + menu, the asset panel, the tab, the picture picker - so a regression in any of those four doors is caught by the suite instead of by you. - The + menu offers "Vector art" among the types that only live in the library, and the entry makes an asset that is selected and stands in the panel under its own heading. - A double-click on the row opens the Vector art tab on that asset, which is what stage 3 built and no check measured until now. - The Texture row of a sprite offers the drawing by name, sorted among the other pictures, and picking it there makes the sprite wear it - measured at the pixel in the scene, not at the row. One finding: the picker listed three entries where I expected more, and the reason is sound - a fresh fixture holds one texture and the drawing, "None" being the third. The check names all three instead of counting, so a lost entry says which one it lost. Tests: ./check.sh 128 files, 1897 tests, exit 0 node tools/e2e.mjs (all modules) ALL PASSED - 1184 checks (was 1179) GM_STEPS=47 (fresh seed) ALL PASSED - 29 checks (was 24) Counter-checks: both hold - no generator registered fails the picker check, and opening the tab without the asset fails the double-click check. Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>	2026-09-21 05:42:07 +02:00
adminandClaude Opus 5	78595ec80f	A selected vector shape has its own inspector rows (#129) ... Stage 4 of #129. Until now the inspector showed the rows of the asset when a shape was selected, so there was no way to give a shape a colour, an outline or a place in the drawing order without editing the project file. The rows for a shape now sit where every other selection puts its rows. - SHAPES lists every shape of the asset, topmost row drawn last, the same way a layer list reads. Selecting the asset itself shows the same list below its own rows, with no shape selected. - Each row paints its shape with the commands the rasterizer uses (shapeDrawing plus paintDrawing) into a 22 px swatch, the whole canvas scaled in, so the row also says where on the canvas the shape sits. - The four order buttons from the issue (forward, to front, backward, to back) sit in two rows of two, and a row can be dragged to another place with a marker line. They are disabled when there is nothing to move. - VECTOR SHAPE carries name, fill, opacity and an outline checkbox, the checkbox adding and removing the stroke instead of hiding it; line colour and width appear with it. A dragged colour slider is one undo step, the style rows going through previewingHandlers like every other row. - A line width of 0 is no stroke, which the command rejects, so the row clamps at 0.1. Findings: - locate('Outline') aims beside the control, because it gives the centre of the label text and a wider label pushes a fixed offset out of the field. __gm.inspectorField(label) knows the centre of the control. - A click into a text field sets the cursor and selects nothing, so a typed hex landed appended to the old one and parseHex returned null without anything failing - typeText only checks that the text is contained. A Ctrl+A goes first now. - Four buttons side by side cut "Backward" to "Backw...", which only the screenshot showed. Two rows of two now, as in the tilemap panel. Tests: ./check.sh 128 files, 1897 tests (was 127/1883). Full e2e suite locally instead of only CI because the change sits in the inspector and touches every selection: ALL PASSED - 1179 checks (was 1172), module 47 at 24 checks (was 17). Three counter-checks hold: not reversing the list fails 1 unit test and 2 e2e checks, dropping the gap correction when dropping a row fails 2 unit tests and the drag check, and a constant signature kills module 47 because the outline rows never appear. Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>	2026-09-20 22:29:40 +02:00
admin	3d7ad65f34	Vector art has a tab to draw in, which is stage 3 of #129 ... Stages 1 and 2 gave the asset a model and a picture, but the only way to put a shape into it was a test calling mutate. The tab closes that gap: what you draw there is what the sprite in the scene carries, with no extra step, because the fingerprint changes and the picture registry of #185 redraws. - The tab has a header with Select, Pen, Grid and Fit, a chequerboard behind the canvas and the canvas itself as a frame. It paints with the same commands as the rasterizer, paintDrawing being exported from viewport/vectorArtPicture.ts for it, so the tab cannot drift away from the picture. - Pen sets points on a click and pulls the handles out on a drag, both of them mirrored; a click on the first point closes the ring and Esc ends an open line. - Select drags a point, a handle or a whole shape, a click on an edge puts a point there, a double click takes one away, and Alt turns a corner round and back. Delete removes the selected shape. - The rules grew inside polygonEdit.ts instead of a second module, as the plan says, so a collider polygon and a frame outline get the same behaviour where it applies. - A point on a curved edge splits the curve by de Casteljau instead of cutting it: both halves together draw exactly what was there before. - A curved edge is walked instead of measured over its chord, or a click on the bow of a curve would grab nothing; the same walk carries the test for the inside of a ring. - One gesture is one undo step. The preview writes the model directly and the old state is put back on release before the command runs, which is the pattern the frame outlines of #141 already use. - state.ts gained a selection kind "shape". The inspector shows the rows of the asset for it, the shape list with colour, opacity and stroke being stage 4. One counter-check was no counter-check: disabling the pen's closing tolerance by multiplying it with 0 left the run green, and rightly so, because the closing click lands on exactly the screen coordinate point 0 came from, so the distance is 0 and <= 0 is true. Only an unsatisfiable condition really switched it off, and then 2 checks fail. A second trap on the way: a false && in front of the guard breaks the TS narrowing, npm run build bails out, and two runs went against the old bundle. Tests: check.sh 127 files, 1878 tests, EXIT 0 (was 126 / 1860). Full e2e suite ALL PASSED - 1172 checks, module 47 alone 17 (was 10). 18 new unit tests in tests/editor/ring-edit.test.ts and 7 new e2e checks in blocks 47c and 47d. Two counter-checks hold: no de Casteljau fails 1 unit test, measuring a curve over its chord fails another. Originals checked back with cmp and rebuilt.	2026-09-20 21:34:14 +02:00
adminandClaude Opus 5	6371576d37	A vector art asset is a picture now, which is stage 2 of #129 and the first stage that shows something in the browser: the asset sits in the picture picker, a sprite carries it in its Texture row and what the sprite shows has been rasterized from the shapes, the generator of #185 being registered for the type vectorart - installVectorArtPictures(app.renderer) hooks the source (core) and the generator (viewport) in once per page from App.ts, by a call and not by a module side effect, so a test may install it or leave it out; the rule lives in core and the painting in viewport - the new core/model/vectorPath.ts turns a shape into plain drawing commands (move/line/curve/close), closed rings being filled while all rings are stroked, a segment staying a line as long as neither of its ends carries a handle - a single handle is enough for a curve, the missing control point sitting on its own end, so a corner may stand next to a round side - and the way back to the first point is only drawn when it is curved, close doing it otherwise; holes go through one door only, Pixi recognising them from a GraphicsPath with checkForHoles, which tests containment rather than even-odd depth, which is enough for a ring inside a ring while without the flag the inner ring simply paints over the outer one (measured, see the counter-checks); the oversampling is the 2x from the plan - RenderTexture.create({resolution: 2}) puts 512 px on the GPU for a 256 canvas while texture.width stays the canvas size, which is the measure the sprite hangs on, and the render texture is the clip itself, so what juts out over the canvas is not in it and needs no mask; drawn pictures get the same sampler state as uploaded ones, setPictureFactory wrapping the factory for it, mirroring keep(); two measuring traps cost me runs - __gm.objectRect(id) gives the centre of the object and not its corner, so the first pass read four pixels next to the sprite and reported background while the rasterizer was correct, and the grid lines of the scene cross exactly in the centre point, so the hole check read #363940 and failed for the right reason, measuring beside it now; renderer.render() runs inside the picture request, which is safe here because every caller asks during its own widget redraw and the frame is drawn on the ticker afterwards, a nested render inside a running render pass would not be - that warning stands in the module head and in the notes; new module 47 with 8 own checks in its own lane (the picture on the GPU at double resolution measuring the canvas, the sprite showing the fill, the inner ring being a hole with the scene shining through, the later shape on top, the stroke running along the ring, a changed drawing getting a new key with the old one freed, and the sprite showing the new colour), the shapes being put into the model by mutate because the tab that draws them is stage 3, and 21 new unit tests in tests/core/vector-path.test.ts; three counter-checks hold: oversampling back to 1 fails the GPU check, checkForHoles off fails the hole check, and not drawing the curved way back fails a unit test; the full suite ran locally instead of only in CI because the change sits in TextureLibrary and touches every picture: ALL PASSED - 1165 checks, measured and carried into README and the wiki (#129) ... Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>	2026-09-20 20:51:54 +02:00
adminandClaude Opus 5	bdb3f066cf	The asset type "vector art" exists as a model, which is stage 1 of #129 and shows nothing in the browser yet on purpose: a vectorart asset is not placeable, sits in the + menu and in the asset panel with its own icon (a curve between two points) and has no tab, so it behaves like a font - selectable, its rows in the inspector, a double click leading nowhere - because the tab is stage 3 and half an asset would only be in the way; the data model in Asset.ts is a shape built from rings (even-odd, so a shape may have holes, answer 6 in the issue), a ring being points with optional bezier handles in/out stored as an offset from the point and a closed flag (an open path is stroke only, answer 4), plus fill colour, opacity and an optional stroke (answer 5) - the two handles are kept apart instead of mirrored, because what "smooth" means is the editor's business and not the model's; canvas width, height and the filter are properties, so they get an inspector row and undo like any other, while the shapes are intrinsic data like the frames of a texture; the revision that #185 hands to the picture path is a fingerprint of what is drawn, not a counter, which is exactly why that key took a string token - no command can forget to bump it - and the name of a shape is deliberately left out of it, renaming changing no pixel; six undo commands in the new vectorArtCommands.ts (add a shape numbered in order, remove one which comes back to its old place - unlike a tilemap layer the last one may go too -, rename, move, write the rings as one step per gesture with the list copied, and set the style where stroke: null takes it away) and the pure function shapeOrderTarget for the four buttons of the planned inspector list (one forward, to front, one back, to back), which also serves dragging in that list; loading from a project file is strict - a point without numbers falls away, a broken handle leaves a corner behind, duplicate shape ids fall away like duplicate layer ids, a stroke of width 0 is no stroke - while a ring with a single point, which is what someone is drawing right now, stays; three findings on the way: JSON.stringify as the fingerprint was wrong because the same drawing came back from a project file as {points, closed} and was built as {closed, points}, so a reload would have rasterized the same picture under a new key (the fingerprint writes its fields in a fixed order now and a test measures that case), toNumber in serialize.ts turns any nonsense into 0 so the Number.isFinite checks ran into nothing and {x: 'far'} became the left edge instead of vanishing (shapes read numbers strictly via asFinite, 0 being a place on the canvas here), and "Vector art" would have been both a menu entry and the panel heading, which an existing test catches because a click by text would hit the heading - the group is called "Vector drawings" now while the menu entry stays "Vector art"; 20 new unit tests in tests/core/vectorart.test.ts and three counter-checks hold: the fingerprint back on JSON.stringify fails 2, reading the numbers loosely again fails 4, and not copying the ring list fails 1; no e2e check and the check sum stays 1157, only module 04 counting 19 asset types instead of 18 (#129) ... Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>	2026-09-20 20:29:35 +02:00
adminandClaude Opus 5	ffdf0a8ddb	The new node "Raycast all" answers with every collider along the ray instead of only the nearest one: it carries the same inputs and settings as Raycast (Ignore owner, Hit triggers, Layers from #158) plus "max hits" where 0 means all, and it hands back parallel lists sorted by distance - objects, colliders, points x/y, normals x/y, distances - next to count, so index i of every list speaks about the same hit; a collider counts once no matter how many convex parts its shape is built from, while a tilemap counts per cell it is hit in, and the filter sits in Solids.raycastAll like the one of #158, the one path the editor run and Play both take, so all 12 new unit tests run through describe.each against both systems; the node needed the value system to learn something it could not do - a graph list carried numbers, text, booleans and bundles but no object handles, asList turned an object into its name, so objects/colliders would have been lists of names, which loses the object when two carry the same name, and collider children usually do; Value now knows a travelling list that may hold handles and "Item at" gives such an item out as an object, ready for Destroy, Apply force or Name of, while the single door into a stored file - writeTyped/asTypeOf - runs the list through the new storedList() so every object becomes its name again and nothing living reaches a project file, which is its own unit test over JSON.stringify; three list nodes follow the handles: "Index of" compares objects by identity because a name is not the object of that name, "Set item" and "Fill" write an object as an object, and "Join text" prints the names instead of the innards; this decision was mine to make because the question ran into the MCP timeout - the alternative was a list of names plus "Object by name", which is the smaller change but lossy; 4 new e2e checks in the new block 43e (shield and floor in one go reading 2 and "145, 280", the second object answering to its name, which only a real object in a list can do, "max hits" 1 stopping at the nearest, and the node showing the row) and 18 new unit tests, 12 in raycast.test.ts, 4 on the value system and 2 in the node catalog; two counter-checks hold: not counting tilemap cells one by one drops 2 unit tests, and answering with the nearest hit only drops module 43 with 2 FAILs; one finding on the way - the node read "maxHits" while every other input carries a spoken label, because int() took the key as its label, so it has a third parameter now, and the e2e check caught that, no unit test did (#157) ... Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>	2026-09-20 18:54:12 +02:00
adminandClaude Opus 5	0fdde6cb1e	The Raycast node filters by collision layers: the node gained a "Layers" setting, a tickbox per collision layer of the project - the same field kind the collider uses for "Collides with" - and the ray only hits what sits on a ticked layer, tilemaps counting as colliders; the default is every layer, and a graph without the param answers exactly as before, which is its own unit test; the check is one-sided on purpose, unlike the symmetric rule of #152: a ray is not a collider, so it never reads the collidesWith of the thing it hits - a collider that meets nothing is still seen by a ray - because who a ray may look at is the ray's business, and a unit test holds that case; the filter sits in Solids.raycast in front of the intersection test, which is the one path the editor run and Play both take, so every unit test runs through describe.each against both systems; NodeView did not know the field kinds layer/layers, so the node would have read "Layers: 65533" - it now shows the name of the layer, or "All layers"; 5 new e2e checks in the new block 43d (a shield on its own layer between the caster and the floor stops the ray, the "Layers" row on the node, the tickbox menu with the project's layers, the ray reaching 280 instead of 145 units once the shield's layer is unticked, and the mask read as a name) and 6 new unit tests, three against each system; two counter-checks hold: disarming the filter line drops 6 unit tests and the unticking check in module 43, and switching the formatting off makes the node check fail with the raw bits; two findings from measuring came out of it and stand in the wiki and the notes - __gm.rays() only measures while the Scene tab is in front, so a node selection blinds it and the block measures through a Log node on distance instead, and a running behavior instance keeps the graph it started with, so the editor run casts with the old mask until the instance is built anew (#158) ... Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>	2026-09-20 18:15:35 +02:00
adminandClaude Opus 5	ae3aa7d3bd	Refactoring round 5 covers the code since round 4 without changing behaviour: four identical copies of dot() and three of "nearest point on a segment" stood in the collision math, in the hit area of the collider outlines and in the polygon handles, so they moved into the new module src/core/util/vec.ts; the warning line, the busy state, info() and the caret reset were written out line by line in both the sign-in screen and the password dialog and are now FormStatus; the closing row "Cancel plus a confirming button, optionally one on the left" was built by hand in FormDialog, FilePicker, OpenProjectDialog and PasswordDialog and is now dialogButtons(); the header bar was drawn by the toolbar, the TabHeader and the Breadcrumb each on its own and is now drawHeaderBar(); AddColliderCommand and AddRigidbodyCommand share a base, each subclass only builds its own asset; Editor.ts derives the panes from assetEditors instead of repeating eight entries and clamps its splitters with clamp(); jscpd over src falls from 0.19 % to 0.14 %; dead code is gone - listScenes() has been orphaned since the Scene picker fell away (#183), DEFAULT_FILTER (#152) was never used, the two test hooks projectPickerRowAt/rowPosition and particleCompiles are read by no tool, and four functions lost an export they did not need; seven comments that told history ("used to", "no longer", "since #...") describe the state of things now, and that this changed nothing was proved by a rebuild - the bundle is md5 identical, b4ad0dfe... before and after; the README said Logout sits at the far right of the toolbar, which has been the Account menu since #182, and wiki/Architecture.md was missing src/core/util/ altogether; 4 new unit tests cover vec.ts, and switching the clamp on the segment off makes exactly one of them fail while none of the 76 neighbouring tests notice, so that clamping was covered nowhere before (#85) ... Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>	2026-09-20 17:24:42 +02:00
adminandClaude Opus 5	da35f10d1a	The undo and redo arrows read as arrows now, and the run buttons sit on the middle of the window: the first pair was a three-quarter circle with a triangle at the end of the arc, which at 16 units puts the head exactly where the arc already is - the two melt into one another and the icon reads as a comma, which is what the screenshot showed - so both are drawn as a flat head standing free beside its tail, a triangle pointing left with a tail curving away to the right and down (redo mirrored), and they were checked in the real build, not only in an SVG renderer, because ImageMagick draws these paths a good deal more kindly than Pixi does; the play/pause pair was off centre because the row has three flexible children - the two spacers around it and the notice label, which is flexible since #177 so that the bar does not overflow at 1280 px - and each takes a third of what is left, so Toolbar.layout() now moves the pair onto the middle of the bar after super.layout(), clamped between the redo edge and the start of the notice so that a narrow window pushes the pair back instead of laying two captions on top of each other; one new e2e check in 46a measures that middle against innerWidth/2 (1148 checks), and the README gained the screenshot of the editor ... Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>	2026-09-20 16:51:34 +02:00
adminandClaude Opus 5	60d0146bde	The topbar is icons only: the leading Project dropdown, the Scene picker and the labelled Play/Pause buttons are gone and in their place stand five icon buttons - menu, undo, redo on the left, play and pause in the middle - while Notice, the save state, fps and the Account menu keep the right side; the Play button swaps its icon for a stop square while the project runs and Pause swaps for a second play sign while it is held (Button.setIcon()), and iconSpace() drops the gap between icon and label when a button has no label, which is what kept a 24 px icon button 3 px off its own centre; the menu carries New project, Open project..., a separator and Project settings..., where the picker (src/editor/OpenProjectDialog.ts) preselects the open project and marks it "open", opens on a double click and puts Delete on the left of Cancel and Open - it closes itself before it asks whether to delete, because two modals on top of each other would have left the question standing over a list it no longer speaks about - and the settings dialog (src/editor/ProjectSettingsDialog.ts) holds the name, the "Play starts" switch (Start scene / Active scene, a preference of this browser and so no command) and the collision layers from #152, which retires CollisionLayersDialog.ts and the "Collision layers..." entry; what Apply actually writes is the pure function settingsChanges(), so renaming and the layers are each their own undo step and each drop out when nothing differs; the Scene dropdown falls away without replacement, the active scene is switched by double clicking it in the Assets panel, which is the way that was there anyway; new module 46 runs last with 9 checks (no label left in the bar, the run buttons in edit mode, the four menu entries, the picker with the open project preselected, Cancel leaving the project standing, the settings dialog on the state of the project, renaming with undo and redo through the icon buttons) and it neither opens nor deletes a project, because that would pull the project out from under every earlier module; modules 8, 18 and 35 and the harness follow the new bar, 6 unit tests cover settingsChanges and 3 the icons (#183) ... Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>	2026-09-20 16:34:14 +02:00
adminandClaude Opus 5	defd4a86d2	The live dt in the graph is not always three decimals: the check in module 18 that reads the value an output last carried asked for /^0\.\d{3} dt$/, but formatNumber trims trailing zeros, so a frame of exactly 50 ms reads as "0.05" - that is why the suite for 5ba796a was red in CI with this single FAIL while the same check is green on this machine, where the frame time never lands on a round number; the check now asks for any number of decimals, which is what it was ever about, and the reason stands as a comment next to it (#119) ... Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>	2026-09-20 15:41:43 +02:00
adminandClaude Opus 5	4f55f85ad4	Collision layers and masks: a collider carries a layer and a mask of the layers it meets, and the pair only meets when both masks name the other's layer - the rule is one pure module (src/core/model/collisionLayers.ts) with layerBit, layersMeet and the names a project starts with, so the three places that have to agree read the same function: the editor run through CollisionSystem, the Solids sweep per pair and Rapier, where the mask becomes the collider's interaction groups; the project file gained collisionLayers: ["Default"] (default one layer, no formatVersion bump), the collider schema two new kinds - layer as a dropdown of the project's layers and layerMask as a menu of tickboxes that stays open while it is ticked (Menu.ts learned rows that do not close on a pick) - and the names are edited through "Collision layers..." in the toolbar's Project menu, not a Project tab, which is the decision I made myself because the question ran into the MCP timeout: the dialog (src/editor/CollisionLayersDialog.ts) holds up to 16 names, Add layer appends "Layer <n>" and Apply writes all of them as one undo step (SetCollisionLayersCommand); a mask read from a file goes through a check that refuses anything that is not a finite number, because Number(null) is 0 and a collidesWith: null would silently have meant "meets nothing"; 9 new e2e checks in module 8 cover the menu entry, the dialog, Add layer, Apply and its undo, both inspector rows, the tickbox menu, and the mover walking straight through the crate that 8c blocked on once their layers no longer meet, and 21 new unit tests cover the rule, the schema and the command (#152) ... Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>	2026-09-20 15:31:22 +02:00
adminandClaude Opus 5	5ba796a2b6	Plugins belong to the project, and they load before it: the project file gained the field plugins: ["demo-plugin.js"] (default empty, no formatVersion bump), the Plugins tab's switch writes into it as an ordinary undo step (SetPluginActiveCommand) instead of into a server-wide plugins.json, and the start order is turned around - startPlugins only fetches the list of files, then editor.boot() runs and ProjectStore.load(id, prepare) hands the raw JSON through before it is deserialized, where pluginsOf(raw) reads the list and PluginManager.syncTo() activates exactly those; that is the point of the issue, because what a plugin registers has to stand there before normalizeGraph would throw it away as unknown (#126, #127), a project switch first stops what the new project does not name and then starts what it does, a file the server does not have is passed over silently, and after signing out the manager is dead so a late event cannot start anything in a torn-down session; on the server plugins.json, PluginStore::setActive, isActive, the route PUT ?r=plugins/{file} and the 403 for inactive modules are gone and GET ?r=plugins only answers {file,bytes,updatedAt}, which makes every plugin file fetchable - the consequence accepted in #117, written down in the wiki for #115 and #116; publishPlugins(root) only copies files now, the seeder switches the demo plugin on in the fixture project, and the Plugins tab carries a puzzle piece as its icon while only a plugin's own tab still goes without one (the knob and the socket are cubic curves, not arcs, which Pixi's parser draws as a spike after an L); 3 new e2e checks in module 38 and 5 new unit tests cover the project as the owner of the switch, its undo, the order, pluginsOf against crude input and an unknown file name (#119) ... Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>	2026-09-20 14:24:27 +02:00
adminandClaude Opus 5	c830c7a3aa	Changing the password: the Logout button at the far right of the toolbar became an Account menu that names the signed-in account in an entry of its own that cannot be picked, with Change password... above Logout, and the new dialog (src/editor/auth/PasswordDialog.ts) asks for the current password, the new one and its repetition, all three as bullets, and stays standing when the server refuses so that it can say why, unlike the other form dialogs; the rules for empty, too short, new equal to old and a differing repetition sit as the pure function passwordProblem() next to loginProblem(), the API gained POST ?r=auth/password which answers 204, insists on the current password although a session is there, enforces a minimum length of 8 in UserStore::MIN_PASSWORD_LENGTH and again in the client so the mask can answer without asking the server, and the new SessionStore::destroyAllFor($user, $keep) ends every other session of the account while the tab that changed the password keeps its own; the placeholders admin/admin and user/user stay as they are, which the length check does not touch because it only runs when a password is set through the API; e2e 45 grew by 8 checks for the menu, the dialog, both refusals and signing in with the old and the new password, and it sets the e2e account back at the end - a run dying in between leaves it on <password>-tmp, which a make-user.php call repairs (#182) ... Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>	2026-09-20 13:46:40 +02:00
adminandClaude Opus 5	1ef497fa17	e2e 45 no longer hangs on the project name: the two checks that opened the editor compared the project's name against "E2E fixture", which is what the seeder writes locally, while CI creates the shell with the key from tools/ci/project-shells.mjs and so calls the same project "fixture" - that is why the run for 8e4bb6e was red with two FAILs although signing in, the editor and the project all worked; both checks now read the project id and the seeded scene name "Level 1", which say the same thing in both places, and since the firewall in front of nockal.com stopped turning every non-2xx into its own 418 page (measured today: the API's 401 comes through with its body) the wrong-password check asks for the wording again instead of just for any message, with the unit test for a page made up in between kept but no longer named after that firewall (#177) ... Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>	2026-09-20 13:27:42 +02:00
adminandClaude Opus 5	8e4bb6e1f9	User management: signing in is required before anything is loaded, the sign-in screen is drawn in the same canvas (user name, password as bullets, Enter moves on and submits) and the editor is built only after it; the API gained auth/session, auth/login and auth/logout while every other route answers 401 without a session, projects carry an owner and a foreign one comes back as 404, accounts live in data/users.json with a password hash and sessions as files in data/sessions with a sliding 30 days, so a build under the open tab does not sign anybody out; Logout sits at the far right of the toolbar and, as asked in the issue, does not reload the page: Editor.dispose() takes the editor down while the canvas stays, which is why the autosave, the focus handlers, the window listeners of the tilemap panel, the shortcuts and the plugins all got a way back; the tools sign in as e2e (tools/lib/auth.mjs, password from GAME_MAKER_E2E_PASSWORD or the git-ignored data/e2e-password.txt) and the browser gets the same session by cookie, new e2e module 45 covers the screen, the wrong pair, the bullets, logout without a reload and signing in again, new unit tests for HttpAuthStore and for what a session leaves behind (#177) ... Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>	2026-09-20 12:50:52 +02:00
adminandClaude Opus 5	60ea56a2ce	Open asset greyed out and real tab cards: Open asset in the scene object menu is only pickable for kinds with an editor of their own, the table of which asset opens which tab moved from Editor.ts into the new module assetTabs.ts with hasAssetEditor so the menu and the editor read the same list, Select asset stays as it was; tabs are drawn as index cards (new module TabButton.ts): the one showing is a light grey card instead of the aggressive blue, rounded above and square below, its name in plain weight and measured bold so it never clips itself, and a mouse down on the tab already showing keeps its colour; the padding left and right grew to 6 px in one place for both kinds of tab, Scene and Game carry an icon too (the scene one from the asset panel, a new game.svg play sign), Plugins and a plugin's own tab have none; new test hook menuEnabled next to menuRows and menuIcons, e2e 01 checks the greyed out entry on a sprite row, 14a-ii the card and the icons of the fixed tabs, 44a the icon at the wider padding (#176) ... Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>	2026-09-20 11:40:01 +02:00
adminandClaude Opus 5	4b5b91eaaa	Open asset in the scene object menu: the context menu of a scene object row has an Open asset entry below Select asset that does the same as a double click on the asset in the asset panel, so it selects the asset and opens its tab; kinds without an editor of their own (sprite, camera, text, collider) are only selected, just like the double click there; e2e 01 right clicks a behavior row and checks the open tab (#176) ... Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>	2026-09-20 10:16:37 +02:00
adminandClaude Opus 5	e3ebf44593	Asset panel grouped by kind with icons: assets are listed under a header per kind (Sprites, Behaviors, ...) with the count on the right, empty groups are not shown, every group starts folded when a project is opened, a click on the header folds and unfolds it, selecting an asset elsewhere unfolds its group and folding the group of the selected asset clears the selection; every asset kind has an SVG icon in src/editor/panels/icons/ drawn before the name, the pure rule for grouping and sorting lives in assetGroups.ts; the same icons replace the kind word in document tabs and the overflow menu (a list icon for the List tab, which also fixes the close x lying over the end of the active tab's text), stand before every entry of the + menu (Button got an icon option) and on the right of scene object rows instead of the type name; the colour swatch next to sprite names is gone from both panels; the SVG loader moved to src/ui/svg.ts for both icon sets; test hook assetRow unfolds the group and scrolls to the row, assetRowShown only reads, new hook menuIcons; e2e 4g and 4h, 14 and 44a check the icons (#176) ... Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>	2026-09-19 18:36:20 +02:00
adminandClaude Opus 5	1c212b1ccc	Scene view symbols come from SVG files: the behavior, container, rigidbody, camera and particles icons live in src/viewport/icons/ and are changed by editing the file and running npm run build; they are bundled, parsed once and drawn into a Graphics by the new module symbolIcons.ts, currentColor becomes the theme color of the symbol, the origin sits in the middle with a centered viewBox and the same units as before, so the symbols are pixel for pixel unchanged; what depends on the object (camera frame, collider outline, one-way cone) stays in code; unit tests keep the files to what Pixi's SVG parser and a browser draw alike (no transform, no polygon, fill always given), e2e 5c reads the five symbols in the theme color (#175) ... Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>	2026-09-19 17:07:56 +02:00
adminandClaude Opus 5	25ec7879a0	Several transitions between the same pair of states: make transition onto a state that is already connected in that direction adds another transition, which gets its own name right away (Transition 2, Transition 3, skipping names that already leave the state), so two unnamed transitions between one pair never exist; renaming is refused when another transition between the same pair in the same direction already carries the name, the empty name included, while equal names to other targets are only warned about as before; the behavior graph keeps Already connected; self transitions may repeat too, each further loop drawn as a ring around the previous one with the preview showing the next ring, and transition labels that would cover another one slide along their own edge until they are free (pure function freeLabelSpot); test hook transitionLabelAt also returns width and height, e2e 26e6 (#162) ... Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>	2026-09-19 16:30:52 +02:00
adminandClaude Opus 5	010b6a7f6c	A state can transition to itself: make transition and a second click on the same state connects a self transition, taking it fires On state exited and then On state entered every time, for local and global machines, while Set state into the current state stays silent as before; only states may connect to themselves, every other node is still refused, one self transition per state; the loop is drawn over the middle of the top edge with its arrow pointing down and its name at the apex, the preview already shows it while armed, and the inspector lists it once under Transitions out; new test hook transitionLabelAt, e2e 26e5 (#163) ... Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>	2026-09-19 16:10:02 +02:00
adminandClaude Opus 5	cc285af10a	Tabs are open documents: Scene, Game and Plugins stay as fixed tabs, every other asset opens in its own tab (double click or Enter in the asset panel, on creation, from the list button), several assets of one kind can be open at once, a tab is labelled with its kind dimmed before the name, cut at 160 px and renamed with its asset, closes with its x or a middle click and goes away when its asset is deleted; a tab always shows its own document instead of following the selection, the picker in the tab head is gone, zoom and scroll are kept per document for the session and dropped on close, a double click on a call node stays in the same tab with breadcrumbs per tab; one editor per kind is switched between documents, the placement rules live in the pure module documents.ts, and the test hook showTab stays as a compatibility path; new e2e module 44 documents (#171) ... Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>	2026-09-19 15:49:54 +02:00
adminandClaude Opus 5	4f546c0e08	Number fields drop trailing zeros: formatNumber still rounds to at most 3 decimals and then removes zeros at the end, so 100.000 reads 100 and 0.500 reads 0.5, everywhere (inspector, graph and shader nodes, duration and fps in the animation and tile tabs); a field's own decimals is now an upper limit, stored values are unchanged, -0 still shows as 0, and the graph's separate integer rule is gone (#172) ... Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>	2026-09-19 14:29:00 +02:00
adminandClaude Opus 5	47eea2f6e4	Each tilemap layer has its own Z: an offset added to the Z of the placed tilemap, like a child's Z to its parent, default 0 keeps the previous order (layers right after their map, in list order), a negative Z sorts a layer below the map, on a tie layers keep their list order and follow the hierarchy against other objects; editor scene and game use the same order through the new pure function drawSlots, a tilemap draws into one container per layer, and the tilemap panel gains a Z field for the selected layer with one undo step per change (#174) ... Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>	2026-09-19 14:03:20 +02:00
adminandClaude Opus 5	5385d9e152	The one-way tolerance angle is a field: a one-way collider and a one-way tile gain One-way angle (0 to 90 degrees, default 45), a contact blocks when its normal is within that angle of the blocking side, without a value the limit is bit-identical to before, and the rule holds for Move, Raycast and dynamic bodies in Rapier; tiles with different angles never merge into one rectangle, the scene view draws the angle as a cone in the middle of the thick side, and the inspector shows Blocks from and One-way angle only while One-way is on, through the new schema option shownWith (#159) ... Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>	2026-09-19 13:13:29 +02:00
adminandClaude Opus 5	d4ea04d4d6	The scene view outlines a tilemap's collision only along its outer edges: where two pieces meet, their shared stretch runs once in each direction and is not drawn, so an autotile lake is one outline without cross strokes at the quarters, merged rectangles of plain tiles and one-way tiles follow the same rule, the bridges from splitting concave outlines disappear and a piece doubled on two layers is outlined once; fill and collision stay as they were, and the result is cached per tilemap and rebuilt only when its collision data changes (#173) ... Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>	2026-09-19 12:54:53 +02:00
adminandClaude Opus 5	6a31f5e0ad	One-way platforms, raycast and collision stay with contact data: a collider can be one-way with a side it blocks from (turning with its object, drawn thick in the scene view) and a tile can be one-way from above, one-way cells never merge with solid tiles, a contact blocks only when its normal is within 45 degrees of the blocking side, the new node Ignore one-way lets an object drop through for a while, and it all holds for Move and for dynamic bodies in Rapier, where the decision is made before each step because the hook may not touch the engine (#155); the new Raycast node answers hit, object, collider, point, normal and distance in our own f64 geometry, the same in editor run and play, and the editor run draws each ray for 0.25 s (#153); On collision stay gains an interval with its own clock per pair, and stay and enter gain the contact point next to normal and impulse (#149); fixes that every Rapier collider of a tilemap had the shape of its last cell ... Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>	2026-09-19 11:36:11 +02:00
adminandClaude Opus 5	947a6b1977	Collision outlines for autotiles: a frame holds several outlines (click adds a corner to the active one, Ctrl/Cmd-click starts a new one, clicking another outline makes it active, Delete removes the active outline and never the frame in collision mode), an autotile's outlines are drawn over the whole block, cut at the quarters and each cell takes the pieces of exactly the quarters its image is made of, so edges, outer corners and notches follow automatically; a tile of the block with nothing drawn blocks fully, cells of only full quarters merge back into rectangles, collision scale does not apply to an outlined autotile, and the previous format with one flat outline still loads (#141) ... Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>	2026-09-19 01:56:20 +02:00
adminandClaude Opus 5	32057a96fc	Physics stage 2: colliders gain the shapes capsule and polygon, a polygon keeps its corners in the property points, turns, scales and mirrors with its object and is edited in the scene view (drag a corner, click an edge to insert one, double-click to delete, at least three stay, each step one undo step), a concave polygon is split into convex parts, a self-intersecting one is drawn red and collides with nothing, Rapier gets a capsule and one convex collider per part on the same body, and Move and the editor run use our own f64 geometry for the new shapes, where on a tie between two normals the one that blocks the move least wins, so a box no longer stops at the foot of a slope (#151); first version of a collision outline per texture frame, edited in the texture tab with the new Collision toggle, which a plain tile blocks with instead of its rectangle (#141, to be reworked) ... Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>	2026-09-18 22:56:25 +02:00
adminandClaude Opus 5	1b5e386b60	Move with collision reacts along the contact normal: it travels to the surface, stays flush and slides the rest of the move along it with Coulomb friction (the mean of both colliders, a tile counts as 0.5), a circle now rolls over an edge instead of catching on it, pushed dynamic bodies move off along the normal, Move gains the outputs hit, normal x and normal y, an object without its own collider moves freely, and editor run and play share the same path through Solids; contact point and normal come from our own f64 geometry (contactBetween), because Rapier's castShape lands 3e-6 px inside the wall in f32 (#150) ... Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>	2026-09-18 21:52:11 +02:00
adminandClaude Opus 5	d931e66f92	e2e 41b finds the ball's bounces by its turning points instead of frames within a pixel of the ground: the ball lands at ~9 px per frame, so whether a drawn frame catches the landing depended on where it fell between two physics steps, and CI missed the first landing and read the second bounce as the first (#147) ... Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>	2026-09-18 20:55:20 +02:00
adminandClaude Opus 5	328f978d3c	Set gravity survives a re-read of the model during play: World.setSceneProp remembers what the run itself set on the scene and syncFromModel lays it back over the copied scene props, so a project event mid-play no longer resets the gravity to the saved 980; the unit test re-reads the model mid-run and e2e 41c forces a project event right after play starts (#147) ... Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>	2026-09-18 20:08:09 +02:00
adminandClaude Opus 5	0ff3c8b742	Physics stage 1b: six new nodes act on dynamic bodies in play (Apply force over the frame, independent of the frame rate, Apply impulse, Set velocity, Set angular velocity, Get velocity, Set gravity for the rest of the run), a node on an object without a dynamic body and moving a dynamic body directly each log a hint once per object, and Move with collision now pushes dynamic bodies with a mass-dependent push while the mover stays flush; Move keeps its own move-and-slide instead of Rapier's character controller, which measurably snags on seams between colliders (#147) ... Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>	2026-09-18 19:19:21 +02:00
adminandClaude Opus 5	78899b1ace	Physics stage 1a runs on Rapier: a new Rigidbody child object (body type, mass, gravity scale, damping, fixed rotation, CCD) makes its parent fall, bounce and come to rest in play, colliders gain friction, bounciness and density, the scene gains gravity (0, 980), the new PhysicsSystem steps at a fixed 60 Hz with interpolation in world coordinates and treats a tilemap as static ground, On collision enter gains normal and impulse, play waits for Rapier and does not start without it, and the editor run keeps the old CollisionSystem; the existing collision tests run against both systems unchanged (#146) ... Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>	2026-09-18 18:11:43 +02:00
adminandClaude Opus 5	d02bcca266	Rapier 2D (@dimforge/rapier2d-compat 0.20) comes in as the physics engine: the editor loads it once in the background right after opening a project from its own chunk, so the main bundle grows by 0.19 KB gzip and the first frame does not wait; loadPhysics, physicsStatus and the 100 px = 1 m conversion live in src/runtime/physics/engine.ts, __gm.physics() reports the state, unit tests pin free fall and a box resting on a box, and e2e module 41 pins that Rapier is ready from its own chunk without console noise (#145) ... Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>	2026-09-18 16:56:47 +02:00
adminandClaude Opus 5	bffa508ee7	A tile gains Collision scale: below 1 each blocking cell pulls in on the sides without a blocking neighbour and stays flush towards its neighbours, so a wall of bushes becomes a narrower wall without gaps and the inner corner of an L closes cleanly; above 1 the cell grows at its open sides; on several layers the largest value counts, and the merged rectangles work in fractions of a cell with exactly the old result at 1 (#140) ... Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>	2026-09-18 15:00:07 +02:00
adminandClaude Opus 5	4728f4fab5	A placed tilemap grows and shrinks at every edge: the new GRID EDGES block in the inspector adds or removes one column or row at Left, Top, Right or Bottom as one undo step, shifting the cells of all layers and moving the placement through its own matrix so the content stays in place on screen; removed painted cells are kept outside the grid and return when the edge grows again, and the Columns and Rows fields of a placement keep the content in place too (#136) ... Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>	2026-09-18 13:58:03 +02:00
adminandClaude Opus 5	0b32d3cbf3	The tilemap panel gains Fill and Pick: Fill floods the connected cells of the active layer that carry the same tile (edge neighbours only, bounded by the grid) as one undo step, Pick takes the tile of the clicked cell on the active layer, and holding Alt picks while any tool is active (#133) ... Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>	2026-09-18 12:31:19 +02:00
adminandClaude Opus 5	c2fd536aaf	The texture field only offers pictures: each texture with its frames, no animations any more; an animation id left in an older project shows as a missing reference (#143) ... Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>	2026-09-18 12:14:01 +02:00
adminandClaude Opus 5	5046ddb810	The tilemap painting tools move out of the inspector into their own panel beside the scene view, shown only while exactly one placed tilemap is selected in the scene tab; the free viewports keep their content in place on screen when they are resized (#142) ... Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>	2026-09-18 11:46:23 +02:00
adminandClaude Opus 5	f53279d065	The active tilemap layer can be renamed from the painting section, and a Show setting fades or hides the other layers in the scene view while the tilemap is selected (#138) ... Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>	2026-09-18 10:56:32 +02:00
adminandClaude Opus 5	bfbcbe604c	The tile list in the tilemap section is a palette of pictures: each tile shows its lone tile (the four convex corners for floor and wall, the picture itself for none) with its name below, laid out with the image-picker grid (#139) ... Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>	2026-09-18 10:15:51 +02:00
adminandClaude Opus 5	4c411c1ff3	Tilemaps can block movement: a tile gains a Solid switch, the solid cells of all layers are merged into rectangles and the placed tilemap takes part in the collision system as one body, reported as other in collision events (#132) ... Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>	2026-09-18 09:47:03 +02:00
adminandClaude Opus 5	10b49fac46	Tilemap cells are stored compactly in the project file: each layer keeps a tile list, an origin and one run-length encoded string per row; older projects with a cell map still load (#134) ... Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>	2026-09-18 09:17:49 +02:00
adminandClaude Opus 5	732f6518ae	The autotile asset is renamed to tile and gains a plain None (1 × 1) kind, which is now the default; older projects load their autotiles as floor tiles (#131) ... Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>	2026-09-18 08:01:07 +02:00
adminandClaude Opus 5	55bfa7521a	The assets and scene objects panels in the left column are split by a draggable splitter that keeps its ratio when the window is resized ... Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>	2026-09-18 07:29:58 +02:00