389d9555fae32f2a725ef229716bb73d4356fc8c
103
Commits
| Author | SHA1 | Message | Date | |
|---|---|---|---|---|
  adminandClaude Opus 5.5
|
84cd36f902 |
Bake a pattern or song to Opus, played in its place by a game (#340)
A pattern or song played by a game runs every note through the scheduler, the instruments and their FX, live. Bake works that out once, keeps it as a file on the asset, and Play pattern and Play song play the file instead, as one voice, for as long as nothing it is made of has changed. The tabs always play live. - Bake is an icon in the header of the Pattern and the Song tab, lit while the bake holds. A click bakes, cancels a bake that runs, or offers Bake again and Remove bake. The toolbar shows the progress. The info of the tab says "baked" or "bake outdated". - The bake holds everything up to the output of the pattern or song. The sound FX of the node, fx params, volume, fade in, bus, Master routing and stopping with a fade stay live. - A print of the worked-out plan decides whether it holds: notes and clips, tempo, length, loop, tracks, the build of each instrument for each note, sound FX, files, cuts and levels. A rename keeps it, an undo back to the baked state makes it hold again. - The file holds the straight run and then one more round of the loop as heard the second time, tails included. Looped, it plays to the loop end and then round that round, to the sample. Once, it fades out over its last 10 ms. Let ring fades it out over 0.3 s. - It is worked out by a second SoundLibrary on an OfflineAudioContext, its scheduler woken by suspends of the offline clock, and what reaches the master is taken. A worklet probe tells whether that was mono, so a mono bake goes on exactly as the notes did. - Opus in Ogg, 160 kbit/s stereo or 96 kbit/s mono, encoded with WebCodecs, the Ogg pages written by hand. Normalized to full scale, the peak kept and played back. - The file goes up into the sounds of the account as "[bake] name", which the sound picker leaves out. An old bake file is deleted once the project is saved without it. Only a bake that holds is loaded. - Ogg files are decoded at 48 kHz: resampled to 44.1 kHz, the loop of a bake lost a sample a round. - Baking and removing a bake are no undo steps, like the EQ's zoom. Findings: - Chrome's AudioEncoder refuses opus.format 'ogg' (NotSupportedError) but hands out the OpusHead with a pre-skip of 312 for 'opus'. - The Song tab's header is full at 1280 px: a captioned Bake pushed Fit off the tab. Hence the icon. Tests: - Unit: tests/core/ogg.test.ts (6), tests/core/bake.test.ts (16), four new in sound-library.test.ts, one in song-play.test.ts. One test cuts, reverses and fades a clip on a song's track: each change outdates the bake, each undo makes it hold again. - e2e 64 (melektaus-atx): ALL PASSED, 36 checks (6 new). Live and baked rendered offline differ by at most 0.06 dB over 114 windows of 20 ms, two loop ends among them. e2e 65 had no red check with the icon in its header. - Gate (melektaus-atx): CHECK EXIT 0, 277 files, 4281 tests. - Counter-checks: print without instrument builds, print taking the sound's file instead of the clip's cut, round taken from the first pass, bake voice without its looping source, Play pattern or Play song ignoring the bake: one unit test red each. Pre-skip set to 0: the e2e comparison 4.8 dB off, only that check red. Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> |
||
|
adminandClaude Opus 5.5
|
5cb7ef7bed |
Show empty asset groups on request, and add by the heading (#361)
The asset panel only listed the categories and types that hold assets. To make the first asset of a kind you had to know its category in the `+` menu. A switch now lists all of them, and a right-click on a heading offers just what sits under it. - General settings has "Show empty asset categories and types", off by default and kept in this browser. Applying it refreshes the panel at once through a new `onGeneralSettings` listener. - `groupAssets(assets, empty)` gives every category and type when asked. The empty ones stand faint with a count of 0, and an empty type has no chevron, since there is nothing to unfold. - `ListItem.faint` draws a row's label, hint and icons at half opacity, like a disabled widget. - A right-click on a category heading offers the types of that category without a submenu, on a type heading only that type. The empty space below the rows still opens the whole `+` menu. `ListView.onListMenu` passes the heading's id for this. - Every menu of new assets says "Create asset" above its entries, so a click on a type reads as making one. `MenuOptions.title` draws that muted line. It is not an entry and matches no search. Tests: - Unit asset-groups and view-tween: 23 green, 2 new. Counter-test with the empty flag ignored: the new groups test fails. - e2e 04 (melektaus-atx): ALL PASSED, 67 checks, 4 new and 1 rewritten. Counter-test with the heading id dropped: the 3 menu checks fail. The title is checked on the `+` button and on a type heading (2 checks extended), the rerun passed with 67 checks. - Gate (melektaus-atx): CHECK EXIT 0, 272 files, 4212 tests. It ran before the menu title. Afterwards only the menu and asset-groups units, typecheck and lint ran, all clean. Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> |
||
|
adminandClaude Opus 5.5
|
23cb34f781 |
Keep a recorded take inside its song (#355)
A take used to land in the Assets panel as "Song – Take N", next to every other sound of the project. Now a song can keep a sound, a pattern or a sound FX to itself: an ordinary asset whose new field `owner` names the song. Everything that finds an asset by its id finds it, so playing, the tabs and the game need no change. Only the places that list assets leave it out. - `core/music/embedded.ts` holds the rules: which types can be embedded, `listedAssets`, the title "Song › Take 1", and the rows an embedded sound hides (Loop, Bus). - One user per embedded asset. `SetSongCommand` settles the song after every edit: a place naming an asset an earlier place claimed, or one of another song, gets a copy, and what nothing names any more goes in the same undo step. The outcome is worked out once, so a redo brings back the same copies. - A split, Ctrl+D and a paste get that for free. The clipboard keeps the embedded assets of the copied items, so a paste after a delete brings the take back. - Deleting a song deletes what it keeps. Duplicating it copies that and points the copy at the copies. A duplicate of an embedded asset is a project asset. - The item menu has Open, Make project asset and Embed a copy. - An embedded item carries a bullet in front of its name. The first pick was a diamond, which the gate's font test refused: the UI font has no glyph for it. - A take is "Take 1", 2, … numbered per song. With the song gone while it uploads, it becomes a project sound under a free name. - Left out of: the Assets panel, every asset picker, the sound FX menu of a track, the test sound of the Sound FX tab and the naming of new assets. Delete on an embedded asset only says where it lives. A ping lights up its song. - Loading drops an `owner` whose song is gone, the asset stays as a project asset. No migration: older projects have no owner. Tests: - Unit embedded (new): 13 green, 6 counter-checks each red - Unit take, song, song-edit, asset-fx, asset-ref, serialize and neighbours: 116 green - e2e 65 (melektaus-atx): ALL PASSED, 47 checks (1 new) - Counter-check e2e 65 (asset panel unfiltered): exactly that check red - Gate (melektaus-atx): CHECK EXIT 0, 269 files, 4167 tests Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> |
||
|
adminandClaude Opus 5.5
|
c95fbc167e |
Ping or open an object's asset from its hierarchy row (#353)
The asset link in the inspector already pings an asset on a click and opens it on a double-click. The rows of the Scene objects panel only selected and folded. Now they lead to the asset the same way. - A click on the row that is selected already pings the object's asset in the asset panel. The selection stays. The ping comes on release, so picking a row up to drag it pings nothing. - A double-click or Enter on an object's row opens its asset, selected or not. - ListView has a new onReselect for a plain click on the row that is selected alone. onSelect stays quiet then, as nothing changes. Decided without asking: - A double-click on an object's row no longer folds it. The chevron and the arrow keys still do. A group's row has no asset and keeps folding on a double-click. - A click with Ctrl or Shift, and one that narrows a multi-selection to its row, does not ping. Both change the selection. - A row whose asset is missing pings and opens nothing. Findings: - The double-click window goes by time (400 ms), not by the event's detail. Two quick click() calls from the harness are a double-click. The comment in e2e 01 said otherwise and is gone. Tests: - e2e 01 (melektaus-atx): ALL PASSED, 13 checks. The two checks for folding on a double-click became one for the ping and two for opening. Counter-check without the ping: that check red. - Gate (melektaus-atx): CHECK EXIT 0, 268 files, 4142 tests. - Not checked: Enter on a row, a group's row on a double-click. Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> |
||
|
adminandClaude Opus 5.5
|
3a52f2290f |
Mix sounds through buses and a master (#325)
Until now every sound went straight to the speakers. There was no point where all of them came together, so nothing could turn the music down against the effects, and a compressor or a shared echo over everything had nowhere to sit. The bus technique of #346 was there already, only the end of the chain was missing. - Bus asset (Audio): Volume, Sound FX and Into. Into is empty for the master and never offers the bus itself nor a bus that already goes into it. The list is worked out when the menu opens, so a change made meanwhile counts. A loop that is in a project anyway sends the buses on it into the master. - The master is no asset. Its volume and sound FX are two new rows under Master in Project settings, one undo step each. A project written before has 1 and none, which is how it sounded. - Sound, instrument, pattern and song have a row Bus, empty for the master. Play sound, Play note, Play pattern and Play song have an input bus: From the asset, Master or a bus. Inside a song or a pattern only the bus of the song or pattern counts. - Set bus volume (bus, volume, time, easing) and Bus volume. An empty bus is the master. The volume set holds for the whole run, across scenes, over that of the asset. GameRun resets it at start and end. Set sound FX parameters without a voice now reaches the sound FX of the bus picked in its new bus input. - SoundLibrary: the master is the bus "mix", each bus "mix:<id>". Every bus, the playing masters of #346 included, ends there, and only the master is heard. setMix sets them up once a context exists, so an editor nobody listened to opens no audio device. The same mix again changes nothing, which lets the editor hand it over on every change of the project. - The tabs play as the game does: Sound, Sound FX, Instrument, Pattern and Song tab through the bus of their asset and the master. - Pause game does nothing to the buses (the user's answer 4b). A game that wants quiet in its pause menu sets a bus volume itself. - Streaming long music files is #349, split off as asked. Finding on the way: the Into menu first worked from a list made when the inspector row was built. After another bus was sent into the open one, e2e 34 saw it still offered. It is now asked on open. The SoundLibrary tests expected voices to end at the destination. They now end in the master, which adds its input, level and pan to every wiring and two gains to every list. Those expectations are updated, nothing else in them changed. Tests: - Unit buses (new): 15 green. Ten counter-checks, each red on its own: loop check, bus picked, reset at run start, bus of Set sound FX parameters, master volume in the settings, and in SoundLibrary default into the master, voices into the master, run volume over the mix, no context before a play, a playing on its bus. - Unit sound-library: 90 green (5 new). Node catalog: 416 green (9 new cases). - e2e 34 (melektaus-atx): ALL PASSED, 75 checks (3 new). The voice of the Sound tab was heard on mix:<bus>, that bus into the other, that one at 0.5 into the master. Master volume 0.6 via the dialog, undo back to 1. - Gate (melektaus-atx): CHECK EXIT 0, 262 files, 4072 tests. Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> |
||
|
adminandClaude Opus 5.5
|
a848cf8469 |
Pick a new asset from category submenus in the + menu
The + menu was one long list in two groups, placeable types and library ones. That split is no longer wanted. The menu now lists the categories of the asset panel, and each opens its types beside it, so a new asset is filed where the panel shows it. - Menu learns submenus: an entry with submenu instead of onSelect opens a second Menu right of the first, or left of it where the canvas ends. Its first entry lines up with the row that opened it. - A submenu opens on hover or click. Resting on another entry swaps or closes it after 150 ms, so a pointer cutting across the rows on its way into a submenu does not lose it. - The row of an open submenu stays lit, and a triangle pointing right marks every such row. - A submenu has no backdrop and no Escape of its own. Popup takes a backdrop option for that. The first menu's backdrop and Escape close the whole stack, and picking an entry does the same. - assetMenuCategories replaces assetMenuGroups and takes categories and their order from ASSET_GROUPS. The types are sorted by label. - New test hooks __gm.menuSubmenus() and __gm.addMenuCategory(). pickAssetType opens the category first, so the modules that pick a type through it need no change of their own. Modules 04, 10, 47, 48, 53 and 54 open the category themselves where they read the menu. Tests: - Unit asset-menu: 4 green - e2e 04: ALL PASSED, 63 checks. New: categories in panel order, each type once and sorted, submenu placement, hover swaps the submenu, picking closes menu and submenu - Gate: CHECK EXIT 0, 261 files, 4040 tests - The other modules that use the + menu did not run here Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> |
||
|
adminandClaude Opus 5.5
|
5e09ba9a50 |
Group the asset panel by category, then by type
The asset panel listed one heading per type, 30 of them side by side. Now the types sit under five categories, and each type heading reads like its entry in the + menu. - ASSET_GROUPS replaces ASSET_GROUP_LABELS and gives every type a name and a category: Basics, Visuals, Logics, Physics or Audio. - The categories keep that fixed order. The groups in a category and the assets in a group stay sorted by name. - A category heading folds like a group heading. A project opens with every category open and every group folded, as before. - Selecting an asset unfolds its category and its group. Folding the category of the selected asset lets go of the selection. - The headings are singular now (Scene, Sprite, Sound FX). The old plural names only kept them apart from the + menu entries. - locate looks in the popup layer first. A click by text meant for a menu entry hit the heading of the same name, since the panel is drawn first. Below an open menu a click only closes the menu anyway. - New test hook __gm.assetCategories(). Tests: - Unit asset-groups: 6 green, counter-check (empty categories kept) 1 red - e2e 04: ALL PASSED, 63 checks (1 new). Counter-check with locate taking the first hit again: 2 red, the click on Behavior created no asset - Gate: CHECK EXIT 0, 261 files, 4040 tests - The category names got their final plural form after these runs. The unit test ran again on them (6 green), e2e 04 did not. Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> |
||
|
adminandClaude Opus 5.5
|
101b12504e |
Play a sound backwards with a Reverse switch on the asset (#321)
A sound asset can now play its stretch backwards. The switch sits on the asset, so every way the sound is heard plays it reversed: Play sound, a song item, an instrument's Sample and a Pitch in a sound FX. There is no Reverse node in the sound FX graph. The user dropped it, because playing backwards needs the whole sound in advance, which a bus or a Chip does not have. - The cut gets a `reverse` flag, stored as the asset property `reverse` (default off). The cut name ends in `~reverse` when it is on, so a reversed sound over the whole file is a cut of its own. - The handles keep marking the same part of the file. The reversed copy is made once, like any cut, and the fades follow what is heard: Fade in ramps at the end handle, Fade out at the start handle. - The Sound tab has a toggle with a left-pointing play triangle. Its playhead runs from right to left, and the wave draws the ramps at the edges they now belong to. The inspector has a Reverse row. - The icon is a tab header icon (`HEADER_ICON_SVG`, next to the snap magnet), not a top bar icon. The first gate run had it in the top bar set, and the test that fixes that set went red. - A song item draws the waveform of a reversed sound backwards. Lengths stay as they are. - The header label reads "Fade in" instead of "Fade in (ms)" and the fade fields are 8 px narrower. With the new button the readout was cut to "0.03 s of 0..." at 1280 px, now it shows in full. The inspector keeps the unit. Tests: - Unit sounds 22, sound-library 85 (1 new each). Counter-checks: without turning the samples round, without moving the fade in to the end, and without mirroring the peaks, all red. - e2e 34: ALL PASSED, 72 checks (2 new). The reversed stretch starts with the last samples of the forward one, and the playhead ran 0.75, 0.60, 0.45, 0.30, 0.15 over the whole file. - Gate: first run red, 1 of 4031 (the top bar icon list). After moving the icon, CHECK EXIT 0, 260 files, 4031 tests. Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> |
||
|
adminandClaude Opus 5.5
|
2fdf97f7de |
Record a take from the microphone in the Song tab (#342)
A song could only be filled with sounds that were made somewhere else. Record plays the song from the cursor and takes the input meanwhile, so a part played along lands on the bar it was played to. - An audio worklet takes the input's samples on the clock the song plays on. Each run carries the frame it was taken at, so the take is cut where the song was heard to start. The output's and the input's latency are taken off, as far as the browser reports them. - The take goes up as mono 16-bit WAV. Sound, a new track "Recording" under the track clicked last and the item at the cursor are one undo step. The sound is named "Song – Take 1", 2, 3 and so on. - While recording the take grows red with its waveform on its track, and a meter beside the input dropdown shows the level. The lanes take no edits then, only a middle-drag pans. - The loop is not used while recording. The song plays once through and on past its end until Stop, Play or Space keep the take. Esc throws it away and nothing goes up. - Echo cancelling, noise suppression and auto gain are off, nothing is played back. The input picked is kept in localStorage. - A take stops by itself at the size a sound may have. A failed upload offers Retry, Download WAV and Discard. - The API takes sounds up to 256 MB and bodies of the same size. nginx and PHP were raised to match outside the repo (body 256m, upload and post 256M, memory_limit 512M). - The pure rules (cut, cap, WAV header, name, track) live in core/music/take.ts. The scheduler tells where it started on the audio clock. - The e2e browser gets chromium's fake microphone and skips the permission prompt. Each run leaves its take in the sound store. Found on the way: - The header was too full with the new widgets and cut the track and item count on the right. Input dropdown and meter are narrower now. Tests: - Unit take.test.ts: 7 new, svg-icons adjusted to 8 toolbar icons - e2e 65 (melektaus-atx): ALL PASSED – 31 checks (+4) - Gate (melektaus-atx): CHECK EXIT 0, 252 files, 3923 tests - Probe on stein2: a 3 s take of the test tone, peak 32767, 285100 bytes, waveform seen in the screenshot Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> |
||
|
adminandClaude Opus 5.5
|
8f9c250eb6 |
Lay patterns and sounds out on tracks and play them as a song #334
Patterns could only be heard one at a time, in their own tab or from a behavior. A song lays patterns and sounds out on tracks along one time axis and plays them through the scheduler of #332, the third piece of the music tools of #330. - New asset type song under the heading Songs, with four empty tracks, 120 BPM in 4/4 and a grid of a bar. Tempo, meter and grid are rows in the inspector. Tracks, items and the loop are the asset's data, held to their rules on load and in every command. - A track has a name, volume, pan, mute and solo. Each is heard on a bus of its own, so a change reaches what is sounding at once. - A pattern item repeats its pattern for as long as it is, with a transpose and another instrument if wanted. A sound item plays its sound as a clip at its own speed, round and round, through a sound FX if wanted. Both have a volume on top of their track's. - Cut back at the left end or split, an item starts as far into what it plays as the cut is: ticks into a pattern, seconds into a sound. - The tab shows the heads with M, S, volume and pan, the ruler of the Pattern tab and the items, a pattern with its notes, a sound with its waveform, a missing asset red. Patterns and sounds are dragged in from the Assets panel. Body, right and left end move, lengthen and cut back, Alt leaves the grid. Ctrl+C/V/D/A, Ctrl+E splits where playing starts, Delete, arrows. A double-click opens a pattern item in its tab. - What is picked is a new selection of its own, so the inspector shows the item or the track, with a button to delete it. - The scheduler plans clips beside notes. Where the playhead starts or jumps back inside a clip, it is taken up that far into its sound. A clip fades out at the end of its item or of the loop. - The editor plays one piece at a time: a pattern started stops the song and the other way round. - The rules are pure functions in core/music/song, editor/song/ songView and songEdit. Findings: - The suites of |
||
|
adminandClaude Opus 5.5
|
4ea752feef |
Draw notes for an instrument in a piano roll and loop them #333
Notes could only be played one at a time, by a key or a behavior. A pattern is a stretch of notes for one instrument, drawn in a piano roll and played in time through the scheduler of #332. Songs (#334) will lay patterns out on tracks. - New asset type pattern under the heading Patterns. Instruments are listed under Instruments now, since a heading is one per type. - Notes are a start and a length in ticks, a note number and a velocity, kept to their rules on load and in every command. The instrument, the length in bars, the grid, the meter and the tempo are rows in the inspector. The loop is the asset's own data, the whole pattern while none is set. - Grids from 1/1 to 1/32 and the triplets 1/4T to 1/32T, all whole ticks. The meter only moves the bar lines, the notes stay put. - The tab shows the keys down the left, a ruler with bars, beats, loop and start along the top, the notes between them and a velocity lane below. Keys the instrument plays nothing for are grey, the names of a drum kit stand on its keys. - A click draws a note on the grid line before the pointer, as long as the last one drawn or lengthened and as hard as the last velocity set. The body moves a note, the right end lengthens it, Alt leaves the grid. A drag on empty grid picks with a band, Shift adds, a right-click deletes. - Keys: Space plays, Delete, Ctrl+C/V/D/A, the arrows by a semitone or a grid step and with Shift by an octave or a bar. A paste lands where playing starts. Every gesture is one undo step. - A click on the ruler sets where playing starts, a drag the loop or one of its ends, its menu loops a bar or the whole pattern. - The wheel scrolls, Shift across, on the ruler or with Alt it zooms. Ctrl+wheel stays with the browser, Pixi listens passively. - Play runs the loop through the scheduler. An edit goes to it on the next window without a restart, a new loop or tempo counts from what is planned. Another pattern shown or a project opened stops it. - The time axis and the ruler are their own pieces in editor/music for the song tab. The rules of the roll are pure functions in rollView and rollEdit. Findings: - Music.play could start after a stop that came while it was still loading its files. A run counter makes the late start give up. Music.edit now loads what a new note needs as well. - A click on an end of the loop would have set the loop again. A press there only moves the end once it is dragged. Tests: - pattern.test.ts (new, 9) and piano-roll.test.ts (new, 16): model, grids, meter, held notes, sequence, commands, loop, round trip, drum names, time lines, rows, hits, bands, lane, edit rules. - e2e 64 (new) on melektaus-atx: ALL PASSED, 20 checks. e2e 4 with 29 asset types: ALL PASSED, 62 checks. - Gate on melektaus-atx: CHECK EXIT 0, 247 test files, 3839 tests. - Counter-checks: the move without its clamp, the sequence without the end of the pattern, the duplicate offset without whole grid steps each fail 1 test. Without passing edits to the scheduler the e2e check for a note drawn while playing fails, the rest passes. - Probe on stein2: the tab with a drum kit, before and while playing, looked at in two screenshots. Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> |
||
|
adminandClaude Opus 5.5
|
8a4e4a6762 |
Play sounds as notes of an instrument asset #331
A sound could only be played as it was, one at a time. An instrument
is a node graph that makes a note a sound: Notes nodes bring the note
in, Samples play sound assets for it, the effects of a sound FX shape
it and the Output sums the layers. Its tab plays it from a keyboard,
a behavior with Play note. It is what patterns and songs (#330) will
play.
- New asset type instrument, under the heading Music, not placeable.
A new one starts as Notes into a Sample into the Output.
- Notes are counted as MIDI does: 60 is C4, names like C#4, sharps
only, the lowest C-1. Notes has From and To, outputs any, note,
frequency and velocity, and with Single notes a trigger per note,
each with an optional name for a drum kit.
- New port type trigger, only into the trigger of a source. Inputs
can take any number of edges now (PortDef.many): a trigger, and
the Output, which plays everything into it side by side.
- Sample plays a sound asset. Follow note shifts it by note - root
through the pitch worklet of #317, so it keeps its length. Gate
fades it out at the end of the note, One-shot plays through. Loop
runs between Loop start and Loop end, also in the worklet.
- Parameters declares the instrument's own parameters with a
default. Sound FX sends the sound through a sound FX asset, its
parameters as inputs, the sound set in where its Input was.
- compileInstrument walks the graph once per note. A trigger is on
only for the notes it stands for, a silent source silences what it
alone feeds, a Mix with a silent side is the other side. velocity
and the parameters stay open for the voice. Builds are cached per
note until the graph or a sound or FX it names changes.
- The player takes a note as one voice of several layers, each way
with its own file and volume. release fades the gated ways out,
one-shots play on. playNote can release after a duration.
- Play note plays one note with velocity, volume, duration and
detached, and hands out voice for Set sound FX parameters and
Stop sound. Velocity is always loudness. Instrument parameters
picks values for the instrument's parameters like Sound FX
parameters does for an FX, renames follow.
- The tab has the graph, a header field per parameter, Stop, and
128 keys below. Keys without sound are grey. A key plays while it
is held. Focused, the computer keyboard plays as in a tracker by
KeyboardEvent.code, the arrows move the octave.
Findings:
- A label of the keys set fill on the shared small text style and
darkened every small label of the editor. Caught in a screenshot
before the commit, the keys have a style of their own now.
- Suite task 523 on
|
||
|
adminandClaude Opus 5.5
|
de14f0f9e2 |
Play a sound through a graph of gain, pitch and EQ effects #311
A sound could only be played as it was uploaded. A Sound FX asset is
a node graph like a shader: Input, effects, Output. Play sound has a
new input fx that sends the voice through it.
- New asset type soundfx ("Sound FX"), not placeable, with a graph
and its own tab. The heading in the asset panel is "Sound effects",
so it does not take the click meant for the + menu entry.
- Nodes in core/soundfx/nodes.ts, category sound, port type audio
that only fits audio: Input, Output, Gain (dB), Pitch (semitones),
EQ (80 Hz and 12 kHz shelves, peaks at 250 Hz, 1 kHz and 4 kHz).
- compileSoundFx walks back from the Output with the shared graph
emitter. An input takes one edge, so the result is one line: a
pitch and a list of gain and filter stages. A node without input
or a graph without Output reports a problem on the node.
- Pitch is the playback rate of the source. It applies to the whole
sound and also changes its length, the node description says so.
- The BehaviorSystem resolves fx and hands the line to the AudioSink.
An fx that is missing or does not compile plays the sound dry.
- SoundLibrary wires source, stages, volume, destination in that
order. stats().last now also names pitch and stage count.
- The tab header picks one of the project's sounds and plays it
through the graph as it stands. Stop there ends only its own voice.
Tests:
- soundfx.test.ts (new, 11), sound-library (9, +2 for the wiring),
node-catalog (+1 for fx), graph and asset-groups adjusted
- e2e 34: ALL PASSED - 26 checks (+5: + menu opens the tab, palette,
2 effects, tab Play and game Play through the FX at -12 st)
- Gate on melektaus-atx: typecheck, lint, prettier clean, 239 of 240
test files green. The red one was sound-library (its fake
AudioContext had no playbackRate), fixed afterwards, gate not
re-run in full.
- Counter-check: without the audio rule in portsCompatible the port
test fails.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
|
||
|
adminandClaude Opus 5.5
|
808e1eefc2 |
Clean up duplicates and dead code, and fix the + menu check (#85)
Refactoring round 9 covers everything since round 8 ( |
||
|
adminandClaude Opus 5.5
|
a526e1b40f |
Use a shader graph as a node in other shaders (#303)
A calculation needed in several shaders (a greyscale, a noise, an outline) had to be built again in every one of them. A shader function keeps it as an asset of its own, called like a behavior is since #16. - New asset type `shaderfunction` ("Shader function"), edited in the Shader tab. The panel beside the graph shows no picture, the readout counts its inputs and outputs. - Two new nodes: `Function input` and `Function output`. Their declared ports, numbers or colours only, are the ports of every call. One of each per function, like Start and End. - The call is node `ShaderCall`, named after the function. The palette lists every function, it can be dragged in from the Assets panel, and a double-click opens it. - The compiler sets the function in where it is called (`inlineFunctions`). It renames the copied nodes `<call>/<node>` and turns an unconnected port into a constant. Passes, Time, the Edge cut and the corner walk then see a plain graph. - A problem inside a function is reported at the call, in the function's words. The function's own tab checks it on its own (`checkShaderFunction`). - `ShaderLibrary` keys a shader on its graph and on every function it calls, however deep, so a change reaches every caller. - The port commands mirror a new, renamed or removed port into every call, as for a behavior's Start and End. `NodeDef.portKinds` holds the two ends to Number and Color. - As agreed in the issue: no `Property`, `Color property`, Output or Vertex output in a function, and `Time` is the caller's clock. - Own decision: a `Pass` may stand in a function. It becomes a pass of the calling shader, so a wide blur can be a function. - A function calling itself, also through another, says so at the node and is not set in. The palette does not offer such a call. - The Shader tab showed only the compiler's problems. A call nothing reaches was never compiled and looked healthy, so a call now also shows its own problem there, as in a behavior. Tests: - Gate: 228 files, 3510 tests, CHECK EXIT 0 (+13: 11 in tests/core/shader-functions.test.ts, 2 for the new icon) - e2e 28: 100 checks, all passed (+3 in 28l-viii). Called and in place both #606060/#a2a2a2, halved in the function #303030/#515151. - Counter-check: a fingerprint without the called functions fails 1 unit test, and in the browser the change check (#606060 stays). - The first e2e runs found two faults, both fixed: a double-click only selected the function, and an unreached call of itself showed no problem. - e2e total 1728 is computed (1725 + 3). Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> |
||
|
adminandClaude Opus 5.5
|
2e55071fa5 |
Lay a shader over a camera's whole picture (#299)
A shader so far worked only on its own wearer. Effects over the whole game picture, such as a vignette, grey, scanlines or a red flash on a hit, had no place to live. A camera now wears one, drawn the way a field shader of a particle source is (#170). - The camera gets a Shader row and, while one is picked, a Shader resolution row. The shader's properties follow as camera rows. They load, animate and appear in a Properties node under Type Camera. - Every view keeps masks and objects in one container. CameraShade renders it into the camera's picture, cleared to the background, and draws the shader over the frame. Game tab and play.html take the container off the stage while the picture stands in for it. - Screen pixels gives the picture as many pixels as it covers on screen. Camera pixels uses View width x View height and scales up without smoothing. - A pixel counts as a camera pixel in both (the user's choice). The uniform uPixelScale makes Texture size read View width x View height, so a Blur keeps its reach at any game scale. - Each camera wears its own shader, overlay cameras included. A red flash on the game camera leaves the HUD of an overlay camera alone. - The scene view's eye has a Shader switch on the Camera row, off by default. With it on, the main camera's shader lies over its frame, below symbols and gizmos, and the world around it stays drawn. - New tool tools/perf-camera-shader.mjs measures the cost. Measured on stein2 (HD 630, Game tab at Fit 1310x679): a camera shader that hands the picture through stays inside the scene's own spread of 3 to 5 fps between runs. A Blur of 4 cost 4 to 8 fps. Tests: - Gate on melektaus-atx: 227 files, 3497 tests (3487 + 10). - e2e 63 alone: 11 checks (6 + 5), e2e sum 1725 counted. - 63e-63i: pass-through is byte-equal and upright at 100%, flat red reaches the corners while the overlay keeps its green, Texture size reads 640 x 360 in both resolutions at Fit, no shader draws as before, and the scene view shows it only with the switch on. - Counter-checks: a camera left out of the shader wearers fails 1 unit test. Counting screen pixels fails 63g with #ab6000. Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> |
||
|
adminandClaude Opus 5.5
|
4f4c149211 |
Duplicate an asset from its right-click menu (#297)
A new asset that starts out like an existing one (a death animation
next to "Break", a second slime) had to be built again by hand. Now
the asset panel's right-click menu has Duplicate.
- The copy lands right below the original and is named the way a new
asset would be ("Crate 2"). It is selected and its tab opens where
it has one. A copied scene does not become the active one.
- One undo step takes it out again. A redo brings back the same id.
- The copy is a deep copy: values, graph, tracks, layers and objects
are its own, and editing it leaves the original alone.
- Frames of a texture or of pixel art get fresh ids, because a sprite
names a frame across the whole document.
- Objects of a scene or container get fresh ids the way pasted ones
do. Parents and object references among them follow the copy.
- Whatever pointed at the original keeps pointing at the original: a
sprite wearing it, an animation's root, a placed object.
Tests:
- 3 new unit tests (DuplicateAssetCommand). One counter-check run:
without renaming the references the scene test fails.
- e2e 04: 2 new checks with the real menu (copy named "Crate 2" right
behind the Crate and selected, one undo removes it).
- Gate: 221 files, 3445 tests, CHECK EXIT 0.
- e2e total 1703 is computed (1701 + 2). Full suite left to CI.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
|
||
|
adminandClaude Opus 5.5
|
7dd3ae1131 |
Tie two objects with a hinge, a spring, a rope or for good (#154)
Two bodies could not be connected: no door on a hinge, no lamp on
a rope, no wheel on an axle. This is the first step of the issue,
the four joints without a motor. The slider and the motors follow
in a second step under the same issue.
- Joint is a new asset type, placed as a child of the object it
holds, like a collider or a rigidbody. "Add joint…" in the
object menu makes one or places one the project has. An object
takes as many as it needs.
- Where the joint sits is the point it holds its object at. A
hinge and a fixed joint have that one point only. A spring and a
rope end at a connected anchor on the other object, counted in
that object's own units, or in the scene's without one.
- The rows follow the type: length, stiffness and damping for a
spring, length for a rope, an angle limit for a hinge. Length 0
takes the distance the two ends were placed at. The limit counts
from how the two were placed.
- The connected object is an object reference in the schema of the
type. Pasting, containers and removing treat it as they treat
every reference since #258.
- shownFor is a new schema option: a row is shown while an enum of
the same bag holds one of the named values.
- The object needs a rigidbody, its own or one further up. Without
one the joint holds nothing and the console says so once.
- A connected object without a rigidbody is a moving anchor: the
joint has a kinematic body of its own that follows it.
- A connected object destroyed while playing makes the joint let go
with a hint. Removed in the editor the reference empties, so the
joint holds on to the scene. The issue asked for "inactive" there.
- "Add joint" ties two objects while the game runs, from a joint
asset as the template. Destroy on the joint lets go, there is no
Break joint node. Destroy with keep children takes the joints
along with the object.
- The scene view draws a line from each joint to what it holds on
to and rings the held point. A selected spring or rope has a
round handle on its far end, and dragging it is one undo step.
- Joints hold in Play only. The editor run simulates nothing
(#148), and the inspector of a placed joint says so.
- Rapier counts a revolute joint's limits absolutely, not from the
start, so the placed angle is added. Measured with a probe.
- The + menu has 25 types now and no longer fits under its button
on a canvas 800 high. It scrolls there, and e2e 04 scrolls to
the last entry instead of expecting it in view.
Tests:
- Gate on melektaus-atx for this state: 218 files, 3390 tests
(3336 + 54), exit 0.
- e2e 1-16,24,39-46,51,52,57,58 on melektaus-atx: 831 checks, all
pass. Module 41 alone: 25 checks (21 + 4).
- 54 new unit tests: 40 in joints.test.ts (rope, spring, pendulum,
limit, fixed, the other end, the node, containers, paste), 6 for
the line the scene view draws, 4 catalog cases of the node. The
remaining 4 come from tests that make a case per asset type.
- Four new e2e checks in module 41: Add joint from the menu, the
rope to the hook with its line and handle, dragging the handle
with one undo, the bob hanging in Play next to one that falls.
- e2e 04, 40 and 46 count the new type in their lists.
- 21 of 22 unit counter-probes fail their tests. The other one is
equivalent: Rapier ignores removing a joint that left with its
body, the guard stays.
- Three browser counter-probes fail their checks (2, 1 and 2).
- One screenshot looked at: icon, line, handle and the rope rows.
- The e2e sum of 1691 is counted (1687 + 4, 1687 measured by CI
on
|
||
|
adminandClaude Opus 5.5
|
46c620ae3b |
Give a behavior more ways in and out, and hear it as an event (#294)
A behavior run by another one had a single flow port at its Start and at its End, so it could not branch for its caller. And it could not be used as an event: a call needs a pulse at its flow input, and the events of a called graph never fire. An input like "Confirm" (Space or Enter) had to be built again in every graph. - A declared port of a Start or an End node can be of the kind Flow. It sits above the values and shares their names, exec stays reserved. Only these two nodes declare one, a struct does not. - Run behavior shows a flow port of the Start as a further flow input. A call arriving through it leaves the Start through the output of that name and not through exec. - Run behavior shows a flow port of the End as a further flow output. The call goes on through the one the End was reached by last, and then through exec. exec fires always, as before. - On behavior is a new event node without a flow input. The behavior it names runs at the node for as long as the behavior around it runs, with all of its own events and one set of variables per node. - Its outputs are those of the End. It fires once the inner pulse is through, by the output the End was reached by last, exec only for End.exec. A pulse that never reaches the End is not seen. - The value ports of the Start are its inputs, read anew for each inner pulse. The Start itself never fires there. - It nests to any depth. Under a Run behavior it stays silent. A behavior hearing itself, however far round, is not started and the node says "A behavior cannot listen to itself". - The palette offers every other behavior with an End once more as "On <name>". A node naming one without End says so. - An On node removed while the game runs ends its behavior with On disable and On destroy. The sounds of the entity end only with the behavior placed on it. - Renaming and deleting a declared port follows the edges at On behavior nodes as it does at Run behavior nodes. - The flow outputs of the Start of a behavior placed on an object never fire, like its exec. - The engine prompt of the benchmark names flow ports and On behavior. Tests: - Gate on melektaus-atx right before this commit: 215 files, 3319 tests (3278 + 41), exit 0. - e2e 19 on melektaus-atx: 39 checks (+4), all pass. e2e 1-6,17-24,26,36,51: 628 checks, all pass. - 19 unit tests in flow-ports.test.ts, 19 in on-behavior.test.ts on a real world, the rest in the node catalog. - Four new e2e checks in module 19: a flow port declared by mouse at the End, On Confirm in the graph, the call leaving through the further output while playing, Enter and Space on a real keyboard. - 19 unit counter-probes all fail their tests. One did not at first (a removed node kept its instance), a test was added. Two browser counter-probes fail their checks. - One screenshot looked at: On Confirm with exec and pressed, the second flow pin at the calling node. - The e2e sum of 1680 is counted (1676 + 4), the full suite and the smokes did not run. - Not seen in the browser: flow inputs at the Start, nesting, the ring, values through On behavior, the palette entry. No test holds that the sounds of the entity go on when a heard behavior ends. Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> |
||
|
adminandClaude Opus 5.5
|
ec2fd9084f |
Say what a button without words does when the pointer rests (#209)
The top bar, the magnet, the eye and many marks of the inspector are
pictures without a caption. Whoever did not know one could only try
it. The toolkit had no hint on hover, which also forced the point
menu of #195 to be words. The answers in the issue settle the open
points: a cut tab name shows in full, shortcuts are part of the
text, the point menu stays as it is.
- Button takes a tooltip, a text or a function asked each time. It
shows on a small sign once the pointer has rested for half a
second.
- There is one sign for the page, a TooltipLayer on the overlay
above the menus. A control reports each pointer move and the
pointer leaving, the layer does the waiting.
- A press, a key, the wheel or a blur of the window takes the sign
away. initUI listens for them on the window.
- placeTooltip in ui/tooltip.ts is the rule for the place as a pure
function: under the control and flush left, flush right at the
right border, above the control at the bottom.
- toolbarTip says what the five buttons of the top bar do right now.
Undo and redo name their step from CommandStack.undoLabel and
redoLabel, as in "Undo Paint tiles (Ctrl+Z)".
- A SortableList reports its own marks with a key per mark: the eye,
the duplicate mark, the cross and the plus.
- The magnet, both fullscreen buttons, the eye of the scene tab, the
overflow of the tab strip, the plus of the assets panel, the marks
of the inspector rows and the nine anchors of the resize dialog
carry a text.
Decided here:
- Every button whose text is cut short shows the whole text, not
only a tab.
- A row action of the inspector names the one thing a click does. A
button that opens a menu says only Reset, Apply or Size from the
picture.
- A button just clicked stays quiet until the pointer has left it.
- A greyed out button shows no sign.
- The switches of the eye popup, the cross of a document tab and the
tools of pixel art have none. The tools carry words, other than
the issue assumes.
- The marks of a list say Show or Hide, Duplicate, Remove and Add,
whatever the list holds.
Found on the way:
- Signing out empties the overlay and would have destroyed a sign on
screen with it. The editor takes the tooltip away first. This has
no test of its own.
- The text hooks locate and has skip the sign, or it would answer
for the button under it.
Tests:
- Gate on melektaus-atx: 210 files, 3209 tests (3176 + 33), exit 0
- e2e 46 on melektaus-atx: 20 checks, all pass
- e2e 1-14 on melektaus-atx: 508 checks, all pass
- e2e 1-9,14,39,40,44-48: 685 pass, 2 fail, both in module 14. It
measures tabs that modules 10 to 13 open, and the chain 1-14 is
green. The cut chain was not run on the state before.
- No full run and no smokes. The sum of 1667 (1664 + 3) is reckoned,
1664 is what CI counted for
|
||
|
adminandClaude Opus 5.5
|
393caadc9d |
Head the groups of the inspector with bands that fold (#290)
The groups of the inspector had a small grey label as their title, in the same grid as a property row, so with many rows one group hardly stood apart from the next. Now every group has a band as its head, from edge to edge of the panel, and a click on it folds the group. - A band runs across the padding of its column in the header colour, with the title and a mark that says whether the group is open. The titles stay as they are, as answered in the issue. - A click on a band folds its group: the rows go, the band stays and the next band moves up against it. A control in the band (Open, + Variable, + Property) does its own job and folds nothing. - A placed object has a group SWITCHES under its name, asset and parent: Enabled, Keep on scene load and the switches of a behavior. An asset has SWITCHES and PROPERTIES, and a group without rows is left out. - The same bands head the tilemap panel, the Variables tab, the side of the Pixel art tab and the shape list of vector art. A list with a title (Layers, Frames, Shapes) folds with a click on its header, clear of its plus. - ui/sections.ts holds the rules as pure functions, SectionStack is the column and SectionHeader the band. Every title of the inspector goes through addTitle or sectionHeader in inspector/host.ts. Decided here: - A fold is kept for good, in localStorage of this browser. The issue asked whether for the session or for good and the answer left it open. - A fold is remembered by title, per panel. PROPERTIES folded once is folded on every object, asset and node. A number in a title does not count. - A behavior asset has all its rows under SWITCHES. A Variables asset and a state machine get a group SCOPE. - A greyed out control in a band takes the click too. Without that the click fell through to the band and folded the group. - The Curve tab has no column of this kind and is unchanged. Found on the way: - The inspector of a sprite is taller than the 800 pixel window of the checks now. The hooks that hand out a row scroll it into view first, and module 28 scrolls before it looks for a row by its text. Tests: - Gate: 202 files, 3008 tests (2982 + 26), exit 0 - e2e: no complete run for this state. Modules 28 to 61 passed alone (749 checks). A full run was cut off in the accounts module at 1492 passes without a failure, the modules after it and the smokes are missing. The sum of 1639 (1635 + 4) is reckoned, CI measures it. - 26 unit tests in tests/editor/sections.test.ts - Four e2e checks with a real mouse, three in module 02 and one in module 48 - 25 unit counter-probes all fail tests, run on stein2 - Screenshots of the bands looked at before the last build, none after it Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> |
||
|
adminandClaude Opus 5.5
|
ded71a92c9 |
Pick the target of an object variable in the Scene View (#276)
Choosing the target of an object variable meant finding its name in a dropdown. With many objects, or several with the same sprite, the name alone does not say which one it is. The eyedropper lets you click the object where you see it instead. - Every object dropdown gets an eyedropper button next to it. This covers variables, struct fields and list entries, in the Inspector and in the Variables tab. - The button opens the Scene View or the container tab the object lives in. A strip above the view names the field and the current candidate and offers Take and Cancel. The cursor is a crosshair. - A click picks a candidate and writes nothing yet. The candidate gets its own cyan frame, the selection stays on the object with the variable. - Clicking follows the selection rule. `pickOn` in `src/viewport/pick.ts` uses `pressOn` and only counts objects the dropdown offers. A click on empty space keeps the candidate. - Enter or Take writes through the same handlers as the dropdown. That is one undo step, or none if nothing changes. - Esc, Cancel, a right click in the view or a second click on the button cancel without writing. So do a tab switch, another selection, undo, redo, play and loading a project. - After Take or Cancel the editor goes back to the tab the pick came from. - While the eyedropper runs, the view does not drag, marquee, paint, show handles or open its context menu. Panning and zooming stay. Found on the way: - Started from the Variables tab, the click missed the object. The Scene View is hidden while that tab is open, and the layout skips hidden children. The strip appeared then, the view moved down by 32 px but kept its old height. `Editor.display()` now lays the row out again after showing it. Tests (on melektaus-atx): - unit pick and object-pick: 27 passed, 13 new - gate: 196 files, 2844 tests, CHECK EXIT 0. Two more come from svg-icons, which checks every icon twice. - e2e 57: ALL PASSED, 12 checks, 5 new (57e to 57g) - Counter-checks work. Without the layout fix 57g fails. Picking objects the dropdown does not offer fails 2 tests. Writing on cancel fails 2 more. Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> |
||
|
adminandClaude Opus 5.5
|
14972d057f |
Refactoring round 8: hide data files, safe saves, Esc as Cancel (#85)
Recurring cleanup round over the code since round 7 (
|
||
|
adminandClaude Opus 5.5
|
bc688f3efc |
Refactoring round 7: split BehaviorSystem, fewer copies (#85)
Recurring cleanup round over the code since round 6 (
|
||
|
adminandClaude Opus 5.5
|
0c41cb97b1 |
Clip the children of an object to a clip area (#260)
An inventory grid could not scroll, because nothing could cut a child off at an edge. A game also had no way to hear the mouse wheel. Both are needed for a scrolling list, a dialog text or a window with more content than room. - A new object type Clip area has width and height and turns, scales and mirrors with its parent. The size gizmo drags width and height. - Everything below a clip area, on every level, is drawn only inside its rectangle, in the Scene view as in the game. Nested areas cut to their intersection. The rule works on a convex polygon, so a turned area cuts right as well. - On click, Is hovered and On mouse wheel do not hit a cut-off part. The Scene view does not pick it either. - In the Scene view the area is a dashed frame that is grabbed only at its edge, so a click inside lands on the content. The eye under Shape hides the frame. In the game the area is invisible. - While an object below an area or one of its parents is selected, the Scene view shows the cut-off part at 30 % opacity and it can be grabbed there. The rule lives in core/properties/clip.ts. - The Properties node knows the type Clip area. - The new event node On mouse wheel fires by the rule of On click. Its delta counts in notches, positive is down, and a frame's turns arrive as one value. It also gives x and y. Limits: - Only sprites and texts show the faded rest. Tilemaps and particles are cut and can be grabbed when open, but are not shown faded. - Masks by texture shape are out, as noted in the issue. Tests: - ./check.sh: 2773 tests, CHECK EXIT 0. - Full e2e run (local): ALL PASSED, 1549 checks, measured. - tests/core/clip-areas.test.ts: 12 tests for the cut rule, scene and game, save and load, hits, the wheel with and without owner, the notch conversion and the open rule. - e2e 58, 5 checks with real mouse and wheel: the scene cuts (74 of 74 red inside, 0 outside), a click on the cut part picks nothing, the selected rest is faded and grabbable, the game cuts, one notch logs 1. - e2e 04 and 46 count the object types and the eye rows. They now include Clip area. - Counter-checks: 6 in unit tests and 3 in the browser, all fail as expected. The originals were restored and checked with cmp. Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> |
||
|
adminandClaude Opus 5.5
|
e8b3ac0a3b |
Keep behavior variables private to their own graph (#257)
A behavior often needs working state such as a timer or a counter. Until now every variable showed up on each placed object and in the Properties menu, so the inspector filled up with values nobody should touch. A private variable works like any other inside its graph but is not offered anywhere outside. - Each behavior variable gets a lock switch next to Keep. It starts off, so existing projects stay as they are (`privateVariables`). - A placed object shows no private variable, neither in the inspector nor while the game runs. If all are private, it says so. - Switching a variable to private drops its overrides on every placed object in one undo step. Switching back does not restore them. - A running game does not write a private value back as an override, and a project change during the run does not reset it. - `+ Property` no longer offers private variables. A port that names one by hand still reads and writes it without a warning. - The default value of a private variable is read-only in the asset inspector. Its shape (name, fields, type, delete) stays editable. - Keep is now a pin icon instead of a word. With the lock added, the header of a list variable had no room left and the lock covered `+ Item`. Not done: the animation track picker still offers private variables. Tests: ./check.sh -> 186 files, 2711 tests, CHECK EXIT 0. e2e 1,19,20,21,56 -> ALL PASSED, 119 checks. New module 56 has 7 checks with a real mouse. Counter-checks fail as expected: unit without the write-back filter, the sync guard, dropping overrides or loading the flag. Browser with all variables on the object, an unfiltered menu, or no value lock. Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> |
||
|
adminandClaude Opus 5.5
|
61bbb96a96 |
Define a struct once as an asset and reuse its shape (#253)
A struct used to declare its fields wherever it stood. The same shape in two variables meant typing it twice, and Pack/Expand copied it once without staying in sync. A Struct asset now holds the shape in one place, and every struct that picks it as its type follows it. - New asset type "Struct" (not placeable, group Structs, own icon). The inspector shows its fields with name, kind and default value, and "Open" shows them in the variables tab. - Struct variables and struct fields get a Type row: own fields, any Struct asset, or "Make struct type". With a type the fields come from the asset and cannot be added, renamed or removed there. The values stay per variable, overrides on placed objects still work. - Pack and Expand get the setting Type. With a type their ports are the fields of the asset and read-only in the inspector. - A change to the asset reaches every typed place in one undo step (syncStructTypes). A new field arrives with its default. A removed field goes along with its port, edge and typed value. A renamed field keeps its value in variables, overrides and on ports with edges, also through nested types. - Undo for these edits records plain assignments (Recorder), because the reach of a change is not known in advance. - Cycles such as Loot in Loot, also through another type, are refused and not offered in the picker. - Deleting the asset names how many places use it. Afterwards each place keeps its fields as its own. - Loading reshapes a stale copy in a project file to its type. - "Make struct type" creates an asset from an existing struct and links the place to it. Differs from the plan: - A changed default value applies to new fields and newly typed places only. Existing values stay. - Removing a single field shows no warning. Undo brings it back. Typed lists are left for #254. Lists stay dynamic for now. Found by e2e: after deleting or renaming the type the inspector did not rebuild and kept showing the old name. Fixed, the check was red before. Tests: - ./check.sh: 182 files, 2661 tests, CHECK EXIT 0 - GM_STEPS=1,4,21,22,54: ALL PASSED, 176 checks - 14 unit tests in tests/core/struct-types.test.ts - New e2e module 54 with 14 checks, real mouse. Module 04 counts 23 asset types. - Counter-probes: without the rename pass 4 unit tests fail, without reshaping values 8, without the cycle rule 1. In the browser, without spreading changes and with + Field despite a type, 3 checks fail. Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> |
||
|
adminandClaude Opus 5.5
|
4857bb75e6 |
Show lists in the inspector and variables in their own tab (#252)
The List tab could show one list at a time and was the only place to see its items. A list now shows its items right where it lives, and a new Variables tab shows all variables of an asset or placed object. - InlineList draws the items of a list under its row in the inspector, in struct fields and in the Variables tab. A list inside a list or a struct field is drawn the same way, one step indented. - The index column is the indent. Items sit under their list without an own margin, and the index column is 16 px wide instead of 28 px. - Above 20 items (INLINE_LIMIT) the rest collapses into "... N more - open in tab". During a run the rows show the values from the game. - ListHead puts "N items" and "+ Item" in one row. "N items" opens the list in a tab. A separate Open button squeezed the counter to zero width in the narrow inspector column. - VariablesEditor shows every variable of a behavior asset, a variables asset or a placed behavior. On an asset it edits the declarations. On a placed object an edit only overrides that object, with the usual reset and push buttons. - Opening a list inside a tab adds a new tab and keeps the open one. valuesKey gives each list its own document, so a list that is already open is shown instead of opened twice. - Titles read "Pickup · Variables" or "Listy · nums · [3]". The tab closes when its asset or object is deleted. - Lists on node inputs stay inline only, a node owns no variables. - The List tab, ListEditor and the __gm.list hook are gone. Tests: - ./check.sh: 181 files, 2645 tests, CHECK EXIT 0 - GM_STEPS=1,21,22,32: ALL PASSED, 123 checks - e2e 21 is rewritten for inline lists and the new tab, 22 and 32 are adapted. Sum in README: 1486 (+6 in 21, -1 in 22), counted by hand. - Counter-probes fail as expected: sub-lists not told apart (1 unit test), sub-list replacing the open tab, all items drawn inline (60 rows instead of 20), no live values (0 rows at 24 items in a run). Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> |
||
|
adminandClaude Opus 5.5
|
393b8ec7f9 |
Build your own easing curve and use it on keys and Lerp (#247)
The built-in eases cover the usual shapes, but a game often wants its own: a coin that bounces twice, a door that overshoots and settles. A new asset type holds such a curve, and keys and the Lerp node can pick it instead of a built-in ease. - New asset type "curve": points like in Vector art, x is t and y is the value. A new curve is the straight line from (0, 0) to (1, 1). - One pure evaluation in src/core/model/curve.ts serves the timeline preview, the running game and the Lerp node. - The curve always has one value per t. The end points stay at t 0 and 1, points cannot pass each other, and a handle that reaches past its neighbour is shortened along its direction. Loading a hand-edited file applies the same rules. - Curve tab: click on the line to insert a point that keeps the shape, click on free space to put one there, drag points and handles, double-click or Delete removes, Alt-click toggles round and sharp. Every step is one undo step. - Presets: all 30 built-in eases plus Linear, fitted with adaptive subdivision. Each stays within 0.4 % of the built-in ease. - Preview: a dot runs along the curve once a second, a second dot shows only the value. The Preview button stops it. - Animation keys get "Curve" under Easing with a curve picker. Lerp gets "Curve" under Ease, and its result may overshoot b. - A missing or unpicked curve runs linear. The inspector says so, the node shows it as a problem, and deleting a used curve warns with the number of keys and Lerp nodes. Tests: - ./check.sh: 180 files, 2612 tests, CHECK EXIT 0 - GM_STEPS=1-6,25,53: ALL PASSED, 309 checks - New e2e module 53 with 13 checks, all with the real mouse. Expected values come from its own Bezier evaluation. - Counter-checks bite: without Bezier evaluation 4 unit tests fail, without handle clamping 2. In the browser, a key that cannot find its curve, a click that sets no point and a handle drag that moves the point all turn checks red. Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> |
||
|
adminandClaude Opus 5.5
|
30de4d35a8 |
Give the scene tab a header with Fit and the eye (#245)
The scene view had no header bar of its own, and its eye sat in the top bar. Switching between Scene and Game also showed two different pictures, since nothing tied the free view to the camera. - Theme.headerPadding (4) replaces Theme.padding in the top bar and in TabHeader, for the padding and for minHeight. Both bars shrink from 40 to 32 px. Nothing else uses the new value. - The new ScenePane wraps the scene view in a header bar with Fit and the visibility eye. The eye is gone from the top bar, which keeps the menu, undo and redo. - Fit with an active camera shows the world exactly as the Game tab does at its chosen step: the same zoom, and the camera centre on the same screen pixel. The rule is the pure freeViewOfCamera in viewport/view.ts, which also mirrors the letterbox snapping. - Fit without a camera frames all content on a whole step, as before. - New hook __gm.sceneHeaderAt(name). e2e 46g opens the eye there. - The doc comment above Theme.treeIndent went away in the working tree along with this. It is committed as found. Not checked: the two views only match while they have the same size. With the tilemap panel open the scene view is narrower, and Auto may pick a smaller step there. Tests: - ./check.sh: 178 files, 2575 tests, CHECK EXIT 0 - 2 new unit tests in view.test.ts: three cameras times four steps land on the same screen point as in the Game tab, Auto stays whole - e2e 3h (2 checks): a real click on Fit at Auto and at Fit, crate, camera frame and view box match in both tabs - GM_STEPS=1-3,46: ALL PASSED, 94 checks - Counter-probes: without the centre offset the unit test fails, with Fit ignoring the camera both 3h checks fail Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> |
||
|
adminandClaude Opus 5.5
|
e0b471c354 |
Open the add menu with a right-click in the asset panel (#244)
New assets could only be added through the + button. A right-click on a category heading or on the empty space below the rows now opens the same menu at the pointer. - ListView gets the callback onListMenu. It fires on a right-click on empty space or on a heading. Only the asset panel has headings, so other lists are not affected. - AssetPanel opens its + menu from there. - A right-click on a heading does not fold or unfold the category. A right-click on empty space clears the selection like a left-click. - A right-click on an asset still opens the menu of that asset. - The empty list now says "No assets - press + or right-click". Tests: - ./check.sh: 178 files, 2573 tests, CHECK EXIT 0 - e2e 1-4: ALL PASSED, 134 checks - 3 new checks in e2e 04 with real right-clicks: menu on the "Scenes" heading (21 types, heading stays folded), menu on empty space, and "Behavior" from that menu creates one, undone again. - Counter-probe: without the menu both right-click checks fail. Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> |
||
|
adminandClaude Opus 5.5
|
2eeabf7c23 |
Drag a whole selection and join existing groups in the hierarchy (#241)
Three follow-ups to the hierarchy groups. Dragging a row that belonged to a multi-selection moved only that one row. The group dialog could only create a new group. The group row drew its folder in front of the label, unlike every other row in the hierarchy. - Dragging a selected row moves every selected object. This holds for reordering, dropping into a group or between its members, dragging out of a group and dropping onto an object as new parent. - The moved objects land side by side in hierarchy order, whichever row was grabbed. The whole move is one undo step. - A selected child of a selected object travels with its parent, not on its own. Dropping the selection onto its own rows does nothing. - Dragging a row that is not selected still moves only that row. - hierarchyDrop.moveObjects replaces the single-object rule. One object is the case with one element, so the old drop tests hold unchanged. - The group dialog has a "Group" dropdown: New group or an existing group. Picking a group greys out the name and turns the button into "Add". A group that holds all chosen objects already is not offered. - Rename keeps using the dialog without the dropdown. - ListRow draws an end icon at the very right and the hint left of it. Only the hierarchy uses iconAtEnd, so other lists do not change. - New test hook __gm.hierarchyHint() gives the centre of a row's hint. Not clicked in the browser: dragging a selection in the container tab and onto an object as parent. Only the unit tests cover these. Tests: - ./check.sh: 178 files, 2564 tests, CHECK EXIT 0 - e2e 1 + 52: ALL PASSED, 27 checks - 7 new unit tests in hierarchy-drop.test.ts, 4 new e2e checks in 52i and 52j with real clicks and a real drag - 4 counter-probes bite: drop rule ignores the selection (5 unit tests fail), icon column not kept free, dialog ignores the picked group, panel ignores the selection (only o2 lands in the group) Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> |
||
|
adminandClaude Opus 5.5
|
893b81f798 |
Select a range of rows with shift-click in the hierarchy (#241)
Ctrl- and shift-click only added single rows to the selection. With many objects spread over the hierarchy, picking a run of them meant clicking each one. Shift-click now selects everything between the anchor and the clicked row, as in a file explorer. - The anchor is the row last clicked without shift, plain or with ctrl. A second shift-click redraws the range from the same anchor. - Ctrl+shift-click adds the range to the current selection instead of replacing it. - A collapsed group inside the range brings all its members. Children hidden under a collapsed parent stay out, since they are not shown. - Without an anchor from the hierarchy, the primary object picked in the scene view serves as anchor. With no selection at all, shift-click adds the single row as before. - The range rule is a pure function in hierarchyRange.ts, so it is tested without a browser. HierarchyPanel keeps the anchor. Not checked in the browser: ctrl+shift-click and the anchor taken from the scene view. Only the code path covers them. Tests: - ./check.sh: 178 files, 2557 tests, CHECK EXIT 0 - e2e 1 + 52: ALL PASSED, 23 checks - 5 new unit tests in tests/editor/hierarchy-range.test.ts - New e2e check 52h with real clicks - Counter-check: without the range, 52h fails with ["o2","o5"] Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> |
||
|
adminandClaude Opus 5.5
|
53fa63441b |
Group scene objects in the hierarchy, for the editor only (#241)
A scene with a hundred crates fills the hierarchy with a hundred rows. Groups bundle top-level objects under one folder row that folds away. They exist for the editor only. Parenting, positions and the game do not see them. - Model: a scene or container template holds a list of groups, an object may carry a groupId. Old projects load unchanged. Loading drops empty groups and members that are no longer top level. - Only top-level objects can join a group. Parenting a member takes it out of the group, and Undo puts it back. There are no groups in groups. - Order: treeOrder lists the members together, where the first one stands. The same order decides drawing at equal z, in the editor and in the game, so the hierarchy and the picture cannot disagree. The stored object list stays untouched when grouping. - Hierarchy: a group row shows a folder icon, the name and the member count. Clicking it selects all members and keeps it folded. Selecting a single member elsewhere unfolds it. Folding lasts for the session. - Create with "Group..." in the object menu. A name dialog asks first, so creating is one Undo step and Cancel creates nothing. - The group menu has Select members, Rename... and Ungroup. The object menu adds "Remove from group". - Drag and drop: onto the group row appends, into a gap between members inserts there, next to a row outside leaves the group. Dragging the group row moves all members as a block. The drop rules live in hierarchyDrop.ts as a pure function. - Copy and paste keeps a top-level copy in the group of its original. A container built from group members takes their place in the group. - Clicking an object that is already selected together with others now keeps only that object selected. ListView narrows the selection on release, so a drag starting on such a row keeps the selection. Not checked in the browser: groups in the container tab, "Remove from group", Ctrl-click on a group row and a drag out of a multi-selection. The code path covers them. Tests: - check.sh: 177 files, 2552 tests, CHECK EXIT 0 - e2e 1, 51, 52: ALL PASSED, 31 checks (new module 52) - 19 new unit tests in object-groups.test.ts and hierarchy-drop.test.ts - 9 counter-probes, all fail as expected (7 unit, 2 in the browser) Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> |
||
|
adminandClaude Opus 5.5
|
6015869297 |
Let the scene view hide symbols, names and shapes per asset kind
The scene view gets crowded once a scene holds many behaviors, colliders and tilemaps. A new eye button in the topbar opens a list of all placeable asset kinds, and each row has toggles for what the scene view draws for that kind. - The popup lists all 9 placeable kinds from Behavior to Tilemap, with the columns Symbol, Name and Shape. It stays open while switching. - Sprite, Text and Tilemap draw no symbol, so their symbol toggle is greyed out. Their name toggle shows a new centred name tag, which is off by default. - Shape exists for Collider and Tilemap. A hidden collider outline is neither drawn nor clickable. A hidden tilemap shape removes the collision outlines and the paint tint, the tiles stay visible. - A hidden symbol takes no slot in the ring and draws no dashed link to its parent. A name that stays on moves to the centre of the object. - The setting lives in the project as `sceneVisibility`, not in localStorage. Older projects load with the defaults, which match the view as it was. - Switching has no undo step, like the game scale. It only changes the view. A change made during Play survives Stop. - The rules sit in `src/core/model/sceneVisibility.ts`, the popup in `src/editor/panels/SceneVisibilityPopup.ts`. Four new SVG icons. Not covered by a check: symbol off with name on for a kind with a symbol, Text and Tilemap with names, and the paint tint with shape off. Tests: - ./check.sh: 173 files, 2515 tests, CHECK EXIT 0 - e2e 46: ALL PASSED, 17 checks. 46g clicks the popup, lays a small tilemap over the crate and removes it again. - e2e 8 alone on a fresh seed: ALL PASSED, 23 checks. A red check in the partial run 2,8,46 came from the module selection. - 8 new unit tests in tests/editor/scene-visibility.test.ts. - 4 counter-probes, each fails its test: load ignores the saved value, Play skips the saved model, scene view ignores collider shape, scene view ignores tilemap shape. Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> |
||
|
adminandClaude Opus 5.5
|
923baf2557 |
Let Spawn take an asset over an edge and find a child by name (#237)
An asset could only be picked as a setting on the Spawn node. It could not be wired in, held in a variable or put into a list. Finding an object below the own one needed a scene-wide search by name. - "Asset" is now a kind like Animation or Sound: port, variable, list item and a new "Asset" literal node, with its own cube icon. - Spawn and Is asset have an `asset` input. It uses the key of the old setting, so a saved asset reads as the value of the input and older projects keep spawning without a migration. - New node "Child by name" searches below an object level by level. A child wins over a grandchild of the same name. Nothing found or no object gives null. Tests: - ./check.sh: 168 files, 2453 tests, CHECK EXIT 0. - 9 new unit tests in tests/core/asset-kind.test.ts, catalog cases for Spawn, Is asset, Child by name and the literal. - e2e 6z-ii (2 checks): node rows and a real drag of the literal onto `asset`. e2e 6: 119 checks passed. Spawn checks in 3 and 9 passed. - Counter-checks: depth-first search fails 1, Spawn reading only the old setting fails 3, runtime ignoring the parent fails 1. Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> |
||
|
adminandClaude Opus 5.5
|
50854389bb |
Let a tilemap layer sort its rows by Y with the objects (#228)
A tilemap layer was one piece in the draw order, so a figure stood either in front of a whole layer of trees or behind all of it. For a top-down game the trees in front of the figure's feet have to cover it and the ones behind must not. - A new "Sort by Y" box under the layer list sets `sortByY` on the painted layer. Every change is its own undo step. - Such a layer comes as one draw slot per row. On its `z`, the rows and all objects on that `z` are sorted by where they stand: the bottom of an object's box, the bottom of a row. Ties keep the hierarchy order, and other `z` values are untouched. - A layer drawn as one piece and the map's own node stay behind the sorted ones on the same `z`, since neither has a single place to stand. Ground belongs on a lower `z` or stays unsorted. - A new tile property "Sort offset" (whole rows, -16 to 16) lets a crown sort with the trunk below it. - `TilemapField` draws a container per row for such a layer, and picking takes the row into account, so a click picks what is drawn in front. Scene view, game view and play share the same rule. Limits: on a rotated map "down" is world Y. A layer sorted by Y costs about one draw call per row and tile instead of one per tile. Tests: - ./check.sh: 160 files, 2350 tests, CHECK EXIT 0 (before 2340). - 10 new unit tests in tests/viewport/sort-by-y.test.ts. - e2e 39-43: ALL PASSED, 148 checks. New check 40p-iii ticks the box and finds the slot of row 0, undo brings back the whole layer. - Counter checks: without the Y sort 5 unit tests fail, with the offset ignored 5, with no row in picking 1. If TilemapField draws no rows, exactly 40p-iii fails in e2e. - The e2e sum in the README is 1378, counted, not yet seen in CI. Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> |
||
|
adminandClaude Opus 5.5
|
cb32b4bc23 |
Draw scene symbols as white panel icons that make room for each other
The scene view drew its symbols from its own SVGs, each in a type colour and some on a plate. They looked heavier than the panel icons and were hard to read on busy ground. Symbols of different objects also sat on top of each other whenever their positions met. - Every symbol is now the panel icon of its kind, one file for both places. The scene-only SVGs in src/viewport/icons are gone. - Symbols are white in a thin dark outline with no plate behind them. haloSvg widens each shape of the file by its own stroke and draws that silhouette dark under the icon, so no second file is needed. - A butt stroke end would leave its end without outline. The halo caps such strokes square, and the rigidbody arrow shaft is now a filled rect so its top edge is outlined exactly. - Symbols are 18 world units across, stay upright and are clickable. A click selects the object, a drag moves it. - symbolLayout places every symbol on its object's position. Symbols that overlap stand on a ring round the middle of their positions, evenly spaced one icon apart. A ring that reaches into another symbol takes it in until nothing overlaps. Ownership plays no part. - Names sit beside their symbol, on the outside of a ring. Selection frames and parent links follow the symbol. - A collider icon no longer shows trigger or invalid state. The outline colour of the shape still does. - A lone collider sits on its sprite's middle again. A press there on an unselected sprite drags the collider, so e2e 02 and 16 now grab the sprite beside its middle. Hook __gm.container.objectRect helps 16 find that spot. Tests: - check.sh: 2245 tests, CHECK EXIT 0 (+8 for layout and halo) - e2e 1-16,31,39-43: 670 PASS, 2 FAIL. Both were sampling too strictly for the thinner, smaller icons. 5c looked for the exact outline colour, which the thin outline only reaches blended at this zoom. 31n started the ring scan one pixel past the smaller ring. Both are fixed, and e2e 5,31 then passed with 48 checks. - 5c checks white with an outline and none of the old colours, 41b checks the ring positions and that a click on a symbol selects its object, 31n checks the now white particle ring. - Counter-checks: without the halo only 5c fails, also with the looser outline match. Without the layout the ring and click checks in 41b fail. Originals restored by cmp. - The e2e check total stays 1351. Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> |
||
|
adminandClaude Opus 5.5
|
2cf72022eb |
Ping an asset from its inspector link instead of selecting it (#221)
A single click on an asset link used to select the asset. That swapped
the inspector over to the asset, so the object being edited was gone
and the second click of a double-click landed on a different row. A
click now pings the asset in the asset panel, like Unity does in its
Project window, and a double-click opens it.
- state.pingAsset(id) emits a new `ping` event. It runs no command and
leaves the selection alone, like openAsset.
- ListView.ping(id) draws an accent overlay on the row. It stays full
for 200 ms and is gone after 1 s, driven by onFrame. destroy cancels
the animation.
- The asset panel expands the group, scrolls to the row and pings it.
- The capture listener and followedLink in the inspector are gone.
The inspector is no longer rebuilt, so pressCount on the label is
enough. followsPress and pressOf are no longer exported from ui/.
- The "Asset" and "Part of" rows of a scene object were a ghost button
that selected the asset. They are now a link label with the same
ping and open behaviour, next to a read-only field with the name.
- The link logic lives in linkLabel() in fieldFactory.ts. createFieldRow
and the asset row share it.
- TextField gets a readOnly option: no focus, no caret, no hover.
- New hook __gm.assetPing(). inspectorLink also reports the field
next to the label (value, readOnly).
Findings:
- Renaming an asset while its object was selected left the old name
in the inspector. This was already the case with the old button.
The refresh now updates the name.
Tests:
- ./check.sh: 151 files, 2228 tests, CHECK EXIT 0 (before 150 / 2226).
New: tests/ui/list-ping.test.ts for pingAlpha and pingAsset.
- e2e 1-16,28 on the final build: ALL PASSED, 575 checks.
28l-ii has 9 checks instead of 5.
- Counter-checks, each failing exactly at its check: ping also selects,
no follow-up frame (alpha stays 0.55), inspector never opens, field
takes focus, name not refreshed, label not a link.
- Check total 1345, calculated. CI last counted 1336 at
|
||
|
adminandClaude Opus 5.5
|
1aae97b335 |
Open a sprite's texture or shader from the menus and inspector (#221)
A sprite's texture and shader were only reachable by hunting for them
in the asset panel. Every place that shows such a reference now leads
straight to it.
- Object menu (hierarchy and scene view): "Open texture" and "Open
shader" sit right below "Open asset" when the sprite has one. The
object's own values count, so an overridden shader opens the
override.
- Asset context menu: the same entries at the top.
- Inspector: every asset field with a value shows its label as a blue,
underlined link. One click selects the asset, a double click opens
it. An override stays gold and gets the underline too.
- The first click rebuilds the inspector, so the second one lands on a
different row. The inspector catches that second click before any
row sees it.
- New pure rule `references.ts`: the asset behind a reference field. A
frame leads to its sheet. Kinds without a tab (palette, font, sound)
get no menu entry.
- `followsPress` in `clicks.ts` keeps the double-click window and
tolerance in one place.
- `activateAsset` in `actions.ts`: opening means the same everywhere
as a double click in the asset panel, so a scene also becomes the
active one. The asset panel uses it too.
Tests:
- ./check.sh: 150 files, 2226 tests, CHECK EXIT 0 (before 148/2214).
- 12 new unit tests: 6 for the reference rule, 4 for the link in
createFieldRow, 2 for followsPress.
- 5 new e2e checks in 28l-ii: both menus, the link's look, click
selects, double click opens.
- e2e 1-16,26,28,35,39,40 on the final build: ALL PASSED, 732 checks.
- Counter-probes: no "Open ..." entries, no underline and a second
click never recognised each fail exactly at their checks.
- Check total 1341 (CI counted 1336 at
|
||
|
adminandClaude Opus 5.5
|
ceaa44e5b8 |
Add roles and a user management tab for admins (#180, #179)
Until now every account could do the same, and managing accounts meant running make-user.php on the server. Accounts now carry a role, and admins get a tab in the editor to create, rename, re-role, reset and delete accounts. Both issues share the same server files, so they land in one commit. #180 Roles: - Every account is admin or user. A missing or unknown role counts as user, on the server and in the client. - auth/session and auth/login return {user, role}. - Auth::requireAdmin() answers everyone else with 403. - make-user.php takes the role as a third argument. Without it an existing account keeps its role, so a password reset from the CLI never demotes an admin. - Admins see and save other users' projects like their own. Saving keeps the original owner. #179 User management: - The account menu gets "User management" (admins only) and "Plugins" (everyone). Both open the same closable tab, accounts on top and plugins below. The fixed Plugins tab is gone. - Per account: Rename, Role, Password (no old password needed) and Delete with a confirmation. "New user..." creates one. - Each account lists its projects with an Open button. - Delete is refused while the account still owns projects. - Renaming moves the projects along and ends every session of the account. transfer takes the same lock as save. - On their own row an admin can only set the password. The last admin cannot be demoted or deleted. The server enforces both. - The account rules live in AccountRules.php and accountRules.ts as pure functions, so they are testable without a server. Findings: - At 1280 px the Delete button reached past the column edge and was not clickable. The name column is flexible now, and module 49 checks the layout. - The server lets an admin delete other users' projects, but the editor has no button for it yet. Left open in the issue. Tests: - ./check.sh: 148 files, 2214 tests, exit 0 (was 147 / 2204). - New tests/php/accounts.test.php, 51 checks, plain PHP. CI runs it as its own step in the gate job, the host has no PHP. - New e2e module 49 with 18 checks. CI creates the e2e-admin account in serve.sh. Modules 14, 38, 46 and the scaffold follow the new tab. - e2e 1-16,37,38,45,46,49: all passed, 581 checks. - Counter-checks: owner on save, admin view, default role and self delete in PHP fail 7, 5, 5 and 1 checks. Unchecked requireAdmin, a wider column and the caller as owner each fail exactly their e2e check. - Check sum 1314 -> 1333 (+1 in 38, +18 in 49), computed. Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> |
||
|
adminandClaude Opus 5.5
|
0e8585665a |
Load the 500 weight and draw missing glyphs as SVG icons (#214)
The theme asks for Source Sans 3 at weight 500, but fonts.ts only
loaded 400, 600 and 700. The browser synthesised the 500 text. The
issue comment also asked for the symbols the font lacks to become SVG
icons. A scan of src/ against the font's cmap found 20 such characters
in 30 places.
- fonts.ts loads source-sans-3-latin-500-normal.woff2 as well.
- Menus draw their ticks and the "current" dot as icons. The dot is a
new MenuItem.current field and no longer part of the label text.
- Inspector action buttons (reset, apply, fit width/height) are
icons. The menu arrow behind them is the drawn Dropdown chevron.
- Kind marks come from a table in markIcons.ts. Picture kinds use an
icon, # and Aa stay text because the font has them.
- Scene marks in the asset panel, sound play/stop and the transition
arrows are icons too.
- Apply is an icon although the font has the arrow. It sits next to
the reset icon and would look different as a glyph.
- A new Icon widget draws on redraw like Button, so Node tests need no
DOMParser.
- Tests find icons through the SVG id. The new hook
__gm.locateIcons(id) and the harness helpers findIcon/clickIcon
replace locate() on the old characters.
Findings:
- Weight 700 is loaded but the theme never uses it. Left as is.
- The old scene-mark check in module 35 accepted any play glyph on
screen. It now checks the mark on the start scene's row.
- Module 44 needs the textures from module 37 and fails without it.
Tests:
- ./check.sh: 145 files, 2187 tests, exit 0 (before 144 / 2143).
- New tests/ui/fonts.test.ts: every theme weight is loaded, and every
character in src/ exists in every shipped face. The cmap reader
matches fontTools (231 characters).
- Icon tests cover the 19 new files. Each kind mark is either an
icon or text, never both.
- e2e 1-16,22,30,34,35,43,44: 586 green, 0 FAIL, then 44 stopped
for lack of module 37. e2e 1-16,37,44,47,48: 618 green.
e2e 1-14 on the final build: 454 green.
- Two new e2e checks: loaded weights in 14, a reset icon pixel in 04.
- Counter-probes all fail as expected: 500 removed, a play glyph put
back, the struct icon removed (one unit test each). In the browser,
500 removed and reset icon hidden fail exactly the two new checks.
- Editor-suite check sum 1312 (1310 measured by CI at
|
||
|
adminandClaude Opus 5
|
8c5846f956 |
Right-click in the scene view opens the object menu (#204)
The object menu lived only on the hierarchy rows. Now a right-click in the scene view opens the same menu for the object under the cursor. - The menu moves out of HierarchyPanel into src/editor/objectMenu.ts. Hierarchy and scene view call the same function, so their entries cannot drift apart. Only the hierarchy adds "Expand all" and "Collapse all". - Which object the menu is for follows the press rule from #203. A selected object under the cursor, even a hidden one, keeps the selection and the menu acts on all of it. Otherwise the topmost object is selected first. - The rule is the pure function menuTargetOf in src/viewport/pick.ts, next to pressOn. - Empty space, including an empty tilemap cell, opens no menu. - The container tab gets the same, because ContainerCanvas extends the scene view. Tests: - ./check.sh: 142 files, 2094 tests, exit 0 (was 2090) - e2e 39,40 fresh: ALL PASSED, 80 checks - e2e 1-16,39,40 fresh: ALL PASSED, 565 checks - New block 40r (3 checks): menu on a hidden selected crate, topmost object without a selection, no menu on an empty cell. - Counter-check: a right-click that always takes the topmost object fails 2 unit tests and the hidden-crate e2e check. Co-Authored-By: Claude Opus 5 <noreply@anthropic.com> |
||
|
adminandClaude Opus 5
|
bbbf34109b |
Lists duplicate, rename and edit values right in their rows
Name, opacity and Z each sat in a separate field below or beside
the list. You had to select a row first and then look elsewhere to
change it. Duplicating was a separate button or not possible at all.
Now the row itself carries everything.
- SortableList gets three optional callbacks. onDuplicate shows a
copy button between the eye and the delete button. onRename opens
a text field on double click, Enter or a click outside commits,
Esc cancels, an empty name is ignored. value puts a NumberField
into the row.
- Dragging on the number changes the value and never moves the row.
A whole drag is one undo step, the canvas follows live.
- Copy and delete only show on the hovered and the selected row.
Their space stays reserved, so nothing jumps on hover.
- Pixel layers: copy right above with the same pixels on all
frames, rename, opacity in percent. The Name and Opacity fields
below the list are gone.
- Pixel frames: copy right after, replaces the Duplicate button.
- Tilemap layers: copy with cells, Z and visibility, rename, Z in
the row. The Name and Z fields in the panel are gone.
- Vector shapes: copy at the same place and select it, rename.
- New in core: DuplicateVectorShapeCommand,
DuplicateTilemapLayerCommand, withLayerDuplicated and copyName
("X copy", "X copy 2"). copyName lives in src/core/util/names.ts
because the model never imports from commands/.
Findings:
- Double clicking a shape that is not selected yet only selects it.
The first click moves the list up, so the second click misses the
name. Module 47 selects the row first.
Tests:
- ./check.sh: 138 files, 2055 tests, CHECK EXIT 0 (before 2052).
- GM_STEPS=47,48 (fresh, twice): ALL PASSED, 91 checks (before 86).
- GM_STEPS=39,40,47,48: module 40 green, 47 died on the rename
check, which was a test fault and is fixed.
- Counter probes: a constant copyName fails the shape and pixel
layer tests. A dead copy hit fails the copy check in 47.
- Check total 1272 in README and wiki, computed (1266 + 6).
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
|
||
|
adminandClaude Opus 5
|
ae0247d86f |
Lists add and delete items right in the list header and rows
The layer, frame and shape lists still had their add and delete buttons scattered below the list, each in its own layout. They now live in the shared SortableList, so every list works the same way. - SortableList gets an optional header with the title on the left and a + on the right, plus an optional x per row next to the eye. - The keepOne option hides the x on the last remaining row, so a pixel art image and a tilemap always keep one layer. - Pixel art layers and frames and tilemap layers use header, + and x. Only Merge down and Duplicate stay below the lists. - Vector art shapes get the x but no +. Add shape stays below the list and Delete shapes stays for a multi-selection. - The section headings in the pixel art column use the same style as the list titles and the inspector. Findings: - The wait loop added to check 47i for #196 only waited for the right half of the shape. If the texture landed between the two reads, the left half was still blue and the check failed. It now waits for both halves. Tests: - ./check.sh: 138 files, 2052 tests, exit 0. - GM_STEPS=39,40,47,48 (fresh): ALL PASSED, 156 checks (was 154). - GM_STEPS=47,48 (fresh, final): ALL PASSED, 86 checks. - Two new e2e checks: x on a shape (47) and x on a frame (48). The tilemap check in 40 now uses the x instead of Delete layer. - Counter-check: with the x not reporting to its owner, exactly the two new checks fail. - Check total 1266 in README and wiki is computed (1264 + 2). Co-Authored-By: Claude Opus 5 <noreply@anthropic.com> |
||
|
adminandClaude Opus 5
|
5b9b57fd19 |
Layer, frame and shape lists all reorder by drag and drop
Reordering shapes by dragging worked well in the vector tab. Pixel art layers and frames and tilemap layers still used up/down buttons. All three lists now share one widget built from the shape list. - SortableList in the UI toolkit, with the drag rules next to it in src/ui/sortable.ts. A row has an optional thumbnail, a name, a hint on the right and an eye toggle. Every drop is one undo step. - The shape list is a thin wrapper around it. shapeRows.ts is gone, its tests moved to the new rules. - Pixel art layers show the layer alone on the current frame, frames show the whole frame. Up/Down, Hide, Earlier and Later are gone. - Tilemap layers get the eye instead of the checkbox. The per-row up, down and delete buttons are replaced by Delete layer next to Add layer. - A row is selected on release instead of press. Selecting rebuilt the inspector or tilemap panel and cancelled a drag that started on a row not yet selected. Tests: - ./check.sh: 138 files, 2052 tests, exit 0 (before 137 / 2051). - GM_STEPS=39,40,47,48 (fresh seed): ALL PASSED, 154 checks. - 5 new e2e checks. Check total 1264 in the README is computed (1259 + 5), CI never measured 1259. - Counter-checks bite: dropMove ignoring reversed fails a unit test, a tilemap drop not applied fails the drag check, a layer thumbnail showing all layers fails the thumbnail check. Co-Authored-By: Claude Opus 5 <noreply@anthropic.com> |
||
|
adminandClaude Opus 5
|
66d6aafbb4 |
Pixel art can be drawn in its own tab with layers and frames (#130)
Textures are uploaded files named by their content, so they cannot be edited in place. Pixel art is therefore its own asset type, like vector art. Its pixels live in the project and the tab rasters them into a texture that sprites, tiles and animations can use. - New asset types Pixel art and Palette. The first pixel art of a project gets a palette with the 16 PICO-8 colours in the same undo step. Every pixel is a palette index, 0 is transparent. - Each layer on each frame is its own file data/pixels/<sha256>.px. The project only holds the names, so undo swaps names. The browser computes the hash and uploads new cels before the project is saved. - New route POST ?r=pixels in api/lib/PixelStore.php. It answers 201 and 422 for broken data. data/pixels/ is git-ignored. - Tools: pencil, eraser, fill (contiguous or all pixels of a colour), eyedropper, line, rectangle and ellipse (outline or filled), brush size 1 to 8. - Layers can be added, deleted, renamed, reordered, hidden, faded and merged down. Frames can be added, duplicated, deleted and reordered, with onion skin and a small playing preview. - Zoom 1x to 32x in whole steps, grid from 8x, a 3x3 tile preview and Resize... with a 3x3 anchor. - All frames sit side by side in one image. Each frame is a region like a cut texture frame, so texture rows offer "Asset / Frame 2" and the context menu has Create animation from frames. Decisions: - Merging down drops the opacity of the upper layer. Indexed colours know no blends. - Only the last palette colour can be removed. Otherwise the indices of every image using the palette would shift. - Undo stores the whole layer per stroke instead of pixel diffs. - Alt+click picks a colour. It is a mouse gesture, not a shortcut. Follow-up issues: #197 import from texture, #198 selection and flipping, #199 PNG export, #200 more tools. Tests: - ./check.sh: 136 files, 2049 tests (before 135 / 2011). 34 new in tests/core/pixel-art.test.ts, 4 from the icon tables. - e2e module 48 fresh: ALL PASSED, 29 checks, console empty. - Counter-probes bite: five on the unit tests, upload order (2 tests fail) and cels not uploaded in the browser (1 check fails). - Check total 1259 in README is computed (1232 measured in CI + 27). Co-Authored-By: Claude Opus 5 <noreply@anthropic.com> |
||
|
adminandClaude Opus 5
|
90627ccf47 |
Snap is a magnet button in every graph and vector art tab (#194)
The snap toggle was a checkbox with the word "Snap" next to Fit, and the vector art tab had its own "Grid" button for the same idea. Both now share one square icon button, so snapping looks and works the same wherever it exists. - SnapToggle is a square toggle button with a magnet icon and no text. It lights up blue when snapping is on, like the other toggle buttons. - The magnet is drawn with cubic curves instead of arcs, because the Pixi SVG parser draws arcs as jagged edges. - The vector art tab drops its Grid button and uses the same SnapToggle. It still snaps to 8 px, the graph tabs to 24 px. - SnapToggle accepts anything with setSnapping(on). The vector art canvas method is renamed from setSnap to setSnapping for that. - Every tab exposes the button as __gm.<tab>.snapButton(). Modules 06, 26 and 36 click through that hook instead of the label "Snap" plus 30 px. Tests: - ./check.sh: 129 files, 1903 tests (was 128 / 1897) - 3 new tests in tests/editor/snap-toggle.test.ts, 3 in the icon tests - GM_STEPS=1-6,26,36,47 fresh: ALL PASSED, 346 checks - GM_STEPS=47: ALL PASSED, 32 checks (was 29) - Counter-checks: toggle not switching its target fails 2 unit tests, the canvas ignoring the switch fails module 47 - Check total 1188 in README and wiki is computed (1184 + 4), the full run is left to CI Co-Authored-By: Claude Opus 5 <noreply@anthropic.com> |
||
|
adminandClaude Opus 5
|
bdb3f066cf |
The asset type "vector art" exists as a model, which is stage 1 of #129 and shows nothing in the browser yet on purpose: a vectorart asset is not placeable, sits in the + menu and in the asset panel with its own icon (a curve between two points) and has no tab, so it behaves like a font - selectable, its rows in the inspector, a double click leading nowhere - because the tab is stage 3 and half an asset would only be in the way; the data model in Asset.ts is a shape built from rings (even-odd, so a shape may have holes, answer 6 in the issue), a ring being points with optional bezier handles in/out stored as an offset from the point and a closed flag (an open path is stroke only, answer 4), plus fill colour, opacity and an optional stroke (answer 5) - the two handles are kept apart instead of mirrored, because what "smooth" means is the editor's business and not the model's; canvas width, height and the filter are properties, so they get an inspector row and undo like any other, while the shapes are intrinsic data like the frames of a texture; the revision that #185 hands to the picture path is a fingerprint of what is drawn, not a counter, which is exactly why that key took a string token - no command can forget to bump it - and the name of a shape is deliberately left out of it, renaming changing no pixel; six undo commands in the new vectorArtCommands.ts (add a shape numbered in order, remove one which comes back to its old place - unlike a tilemap layer the last one may go too -, rename, move, write the rings as one step per gesture with the list copied, and set the style where stroke: null takes it away) and the pure function shapeOrderTarget for the four buttons of the planned inspector list (one forward, to front, one back, to back), which also serves dragging in that list; loading from a project file is strict - a point without numbers falls away, a broken handle leaves a corner behind, duplicate shape ids fall away like duplicate layer ids, a stroke of width 0 is no stroke - while a ring with a single point, which is what someone is drawing right now, stays; three findings on the way: JSON.stringify as the fingerprint was wrong because the same drawing came back from a project file as {points, closed} and was built as {closed, points}, so a reload would have rasterized the same picture under a new key (the fingerprint writes its fields in a fixed order now and a test measures that case), toNumber in serialize.ts turns any nonsense into 0 so the Number.isFinite checks ran into nothing and {x: 'far'} became the left edge instead of vanishing (shapes read numbers strictly via asFinite, 0 being a place on the canvas here), and "Vector art" would have been both a menu entry and the panel heading, which an existing test catches because a click by text would hit the heading - the group is called "Vector drawings" now while the menu entry stays "Vector art"; 20 new unit tests in tests/core/vectorart.test.ts and three counter-checks hold: the fingerprint back on JSON.stringify fails 2, reading the numbers loosely again fails 4, and not copying the ring list fails 1; no e2e check and the check sum stays 1157, only module 04 counting 19 asset types instead of 18 (#129)
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com> |
||
|
adminandClaude Opus 5
|
cb1804dcf2 |
A picture in the editor may now be drawn instead of uploaded, which is the piece #129 (Vector art) and #130 (Pixel editor) both need and neither could build alone: TextureRef.file has been a file name on the server, isTextureFile() checking a sha256 hash plus an extension and TextureLibrary fetching it over HTTP, so an asset that paints its own image had nowhere to put itself - the key now also takes the form gen:<assetId>@<revision>, which an uploaded file can never look like, and everything that only passes a ref along (sprite, tile, tilemap mesh, particle source, shaders, aspect ratio) is untouched because it still sees a Texture; the revision is a string, not a counter, which is the one deviation from the plan in the issue and costs nothing - gen:a1@7 and gen:a1@c0ffee go through the same door, so a generator may fingerprint its own content instead of relying on every command to remember to bump a number; two registries keyed by asset type as a plain string, so a plugin may bring its own type - registerPictureSource(type, read) in the new core/model/generated.ts tells the model canvas size and revision and resolvePicture() builds the ref from it (no rect, no slice, smooth from props.filter like a texture), and registerPictureGenerator(type, draw) in the new viewport/generatedPictures.ts hands out the finished texture, projectPictureFactory(() => state.project) tying the two together per session in App.ts; invalidation is a rule instead of guesswork at twenty call sites: GeneratedPictures<T> holds one picture per asset keyed on the revision and frees the old one as soon as the new is drawn, TextureLibrary destroying it and dropping the crops cut from it, while a generator that cannot draw yet is not remembered but asked again next time - the class imports Pixi as a type only, so the whole bookkeeping is measurable without a GPU; carried along are the picture picker (a drawn asset sits among the textures by name, without frames), the delete warning (counts tiles and animations for it too) and the asset context menu, where "Create sprite from picture" now covers it while "Create animation from texture" stays texture-only because it needs frames; one finding while probing - crop() could not have cut a generated texture at all, a RenderTexture having no source.resource to draw back from and drawImage running onto null, so it is handed out whole, a drawn picture having no sheet whose neighbouring row could bleed in; 18 new unit tests, 10 in tests/core/generated-picture.test.ts (building and splitting the key, an uploaded file is not one, no registry means no picture, resolving to canvas size, a new revision is a new key, a canvas without a size, the filter, the sprite size, picker order) and 8 in tests/viewport/generated-pictures.test.ts (drawing once, freeing the old revision and only for its own asset, null is not remembered, no key means nothing drawn, a session change gives everything back, peek), and three counter-checks hold: dropping generated assets from resolvePicture fails 5 of the 10 core tests, not freeing the old revision fails 1 viewport test, and narrowing the picker back to textures fails 3; no e2e check and the check sum stays 1157, because without a generator the groundwork shows nothing in the browser - that evidence comes with #129 (#185)
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com> |