a6c00f7b8b1b0296ab0bc44699e3e723f4822a23
26
Commits
| Author | SHA1 | Message | Date | |
|---|---|---|---|---|
  adminandClaude Opus 5.5
|
23922ee4a2 |
Show the zoom of the music tabs and the EQ as a transition (#377)
The zoom transition of #309 left out the Pattern, Song and Sound tabs
and the Parametric EQ's curve. There a wheel step or Fit still jumped,
whatever "Zoom (ms)" in the general settings said.
- axisTween wraps ViewTween for a single axis. The music tabs zoom
their time across and their rows, tracks or height down apart, so
each keeps one tween per axis and either goes its own way.
- Fit by its button is shown as a transition too, as in the other
tabs. The fit on opening a document still jumps.
- A middle-button pan first lands a transition under way, and saving
a document's view lands it on the step it was heading for.
- The EQ's range is saved on the node at once. While the zoom is on
its way the curve draws a range of its own and writes nothing.
Its dB lines are those of the new range, sliding to their place,
so no line shows a crooked number.
Found on the way, not part of #377:
- CI task 611 for
|
||
|
adminandClaude Opus 5.5
|
82e96e680f |
Decode a clip from a file of its own, not its whole sound (#349)
A clip was cut from its sound's file, so a game decoded the whole file for it and held it for as long as the page was open. A long recording played through a few short clips cost the recording. Every clip now has a copy of its cut as Opus, with Stream on or off, and a game decodes that instead. - StreamKeeper makes the copy of each clip whether its sound streams or not. Stream only decides whether a sound gets a copy of its own. - clipCopyTable says which cut decodes from which copy. The sound library loads the copy for a clip unless the whole file is decoded already. Then the clip is cut from that as before. - projectFiles decodes the whole file ahead only where something may play the sound itself: no clips, a clip without a fitting copy, or the sound's id anywhere in an asset that can name one. That last test walks the data, not the fields, so no place is missed. - A copy that cannot be had falls back to the whole file. A library that bakes keeps to the whole files, as the bake's fingerprint does. Tests: - Gate: CHECK EXIT 0, 280 files, 4319 tests (7 new: streams +4, sound-library +3). - e2e 34: ALL PASSED, 108 checks (2 new). With Stream off a fresh library decodes the ten-second reversed clip's copy and not the five-minute file. It is the cut made from the original to within 0.0091 a sample and 0.013 dB in any 20 ms. Once a node plays the sound itself, the whole file is decoded ahead again. - e2e 65: all passed with this change. - Counter-checks red as they should be: the library ignoring copies, the whole file always decoded ahead, clip copies only with Stream. Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> |
||
|
adminandClaude Opus 5.5
|
2764919bb8 |
Stream long sounds from an Opus copy instead of decoding them (#349)
A sound was decoded whole as soon as the project opened, in the editor and in a released game: five minutes of stereo held some 115 MB for as long as the page was open. A sound with Stream on now plays from a copy as Opus in Ogg, fetched a piece at a time and decoded a few seconds ahead by WebCodecs, so a game holds a few megabytes for it. - The Stream switch is a row of the sound, off by default. The Sound tab suggests it from a minute on and says how far the copy has got. - StreamKeeper makes the copies in the browser, a moment after the last change, one at a time: the sound's own and one per clip of its cut, fades and Reverse baked in. A copy that is no longer wanted is taken off and deleted once the project is saved without it. - streamTable says which played names stream from which copy. A clip without a fitting copy, a Sample and a Reverb impulse stay decoded. A sound with Stream on is never decoded ahead. - The page fetches by Range and takes the whole file from a server that ignores it, as the CI's PHP server does. It keeps the bytes and the first two seconds decoded, the rest goes four seconds ahead. - A jump decodes 32 packets before the place first. Measured in Chrome, what follows is then the same to the bit as decoding from the start. With 4 packets it was 0.06 off. - The stream-player on the FX worklet reads the samples at the rate of the context along a Catmull-Rom curve. What comes late is silent and skipped once it is there, so a clip keeps its beat. - The opening stretch goes with the player as it is made. Sent by message it came a few milliseconds late, and 557 samples of the attack were lost. - Pitch on a streamed sound is a shifter after the player, as on a bus: the length stays and it is heard 42.7 ms late. - Bakes of patterns and songs (#340) always stream now. - The song timeline draws a streamed sound from its copy decoded at 8 kHz, keeping only the peaks. Tests: - Gate: CHECK EXIT 0, 280 files, 4312 tests (31 new: ogg +3, stream-queue 6, streams 11, streaming 6, sound-library +5). - e2e 34: ALL PASSED, 106 checks (7 new). Five minutes of mono, 4.8 MB as WAV, 3.6 MB as its copy: streamed the renderer grows by 5.8 MB, decoded by 69.6 MB. Offline at 48 kHz, start, loop seam and a reversed clip are the copy decoded whole to the sample (0). - Counter-checks red as they should be: no pre-roll, no catch-up of late samples at the end, no opening stretch, a streamed sound decoded ahead. Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> |
||
|
adminandClaude Opus 5.5
|
84cd36f902 |
Bake a pattern or song to Opus, played in its place by a game (#340)
A pattern or song played by a game runs every note through the scheduler, the instruments and their FX, live. Bake works that out once, keeps it as a file on the asset, and Play pattern and Play song play the file instead, as one voice, for as long as nothing it is made of has changed. The tabs always play live. - Bake is an icon in the header of the Pattern and the Song tab, lit while the bake holds. A click bakes, cancels a bake that runs, or offers Bake again and Remove bake. The toolbar shows the progress. The info of the tab says "baked" or "bake outdated". - The bake holds everything up to the output of the pattern or song. The sound FX of the node, fx params, volume, fade in, bus, Master routing and stopping with a fade stay live. - A print of the worked-out plan decides whether it holds: notes and clips, tempo, length, loop, tracks, the build of each instrument for each note, sound FX, files, cuts and levels. A rename keeps it, an undo back to the baked state makes it hold again. - The file holds the straight run and then one more round of the loop as heard the second time, tails included. Looped, it plays to the loop end and then round that round, to the sample. Once, it fades out over its last 10 ms. Let ring fades it out over 0.3 s. - It is worked out by a second SoundLibrary on an OfflineAudioContext, its scheduler woken by suspends of the offline clock, and what reaches the master is taken. A worklet probe tells whether that was mono, so a mono bake goes on exactly as the notes did. - Opus in Ogg, 160 kbit/s stereo or 96 kbit/s mono, encoded with WebCodecs, the Ogg pages written by hand. Normalized to full scale, the peak kept and played back. - The file goes up into the sounds of the account as "[bake] name", which the sound picker leaves out. An old bake file is deleted once the project is saved without it. Only a bake that holds is loaded. - Ogg files are decoded at 48 kHz: resampled to 44.1 kHz, the loop of a bake lost a sample a round. - Baking and removing a bake are no undo steps, like the EQ's zoom. Findings: - Chrome's AudioEncoder refuses opus.format 'ogg' (NotSupportedError) but hands out the OpusHead with a pre-skip of 312 for 'opus'. - The Song tab's header is full at 1280 px: a captioned Bake pushed Fit off the tab. Hence the icon. Tests: - Unit: tests/core/ogg.test.ts (6), tests/core/bake.test.ts (16), four new in sound-library.test.ts, one in song-play.test.ts. One test cuts, reverses and fades a clip on a song's track: each change outdates the bake, each undo makes it hold again. - e2e 64 (melektaus-atx): ALL PASSED, 36 checks (6 new). Live and baked rendered offline differ by at most 0.06 dB over 114 windows of 20 ms, two loop ends among them. e2e 65 had no red check with the icon in its header. - Gate (melektaus-atx): CHECK EXIT 0, 277 files, 4281 tests. - Counter-checks: print without instrument builds, print taking the sound's file instead of the clip's cut, round taken from the first pass, bake voice without its looping source, Play pattern or Play song ignoring the bake: one unit test red each. Pre-skip set to 0: the e2e comparison 4.8 dB off, only that check red. Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> |
||
|
adminandClaude Opus 5.5
|
25084f8576 |
Refactoring round 10: split SoundLibrary, fold sound duplicates (#85)
Refactoring round 10 covers everything since round 9 ( |
||
|
adminandClaude Opus 5.5
|
af2312a5e7 |
Play every tab's preview straight into the master (#368)
Since #351 the tabs played their asset along its links in the Master routing, as the game does. A song linked into a reverb bus was heard through that bus while it was edited. A preview should sound like the asset itself, so the tabs leave the Master routing out again. - The Sound, Sound FX, Instrument, Pattern and Song tab play into the master. The sound FX of the asset still applies, and so does the master's own volume and FX. - Inside a song its own routing of tracks and sends still counts. - The game is unchanged: Play nodes go along the routing as before. Tests: - e2e 34 (melektaus-atx): ALL PASSED, 96 checks. The routing check now holds the mix of the two buses as before, and the Sound tab on the master with the bus silent. - Counter-probe e2e: the Sound tab along the routing again, the routing check red. - Gate (melektaus-atx): CHECK EXIT 0, 274 files, 4230 tests. Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> |
||
|
adminandClaude Opus 5.5
|
0e73fd85b9 |
Route sounds, songs and buses in one Master routing graph (#351)
A project bus could only go into one other bus, and a sound, an
instrument, a pattern or a song into exactly one bus. A shared reverb
needs a sound to go there in part and on dry at the same time. Instead
of a list of sends on every asset, the project gets one routing graph
like the routing of a song (#350), one level up.
- Menu -> Master routing opens a tab with one graph per project. It has
a node per sound, instrument, pattern, song and bus, named after its
asset, and one Master. Embedded assets have none, their song routes
them.
- The nodes follow the assets. Every edit settles the routing in the
same undo step (KeepRoutingCommand), so an undone delete brings the
links of its asset back. A new asset gets a node and a link to the
master. What went only into a deleted bus goes to the master.
- New nodes start in three columns: what plays, the buses, and the
master a row above, so no link into it runs behind a bus.
- Links are sends: -60 to +12 dB, and a Mode on links out of a bus or a
song. Out of a sound, an instrument or a pattern a link always takes
the sound after its volume and FX. Loops are refused.
- A node without a link is silent and says "Goes nowhere".
- The rows Bus and Into are gone. Play nodes with a picked bus still
overrule the routing.
- A click on a node shows its asset in the inspector, the Master shows
the master volume and sound FX. A double click opens the asset's tab.
- The graph lives in project.routing and is held to the assets when a
project is read, but nothing is added there. The editor adds the
nodes when it opens a project. An asset without a node plays on the
master, so old projects sound as before without a migration.
- In the mix an asset with one link at 0 dB goes straight into that bus.
A sound or instrument with more gets a bus of its own with the sends.
A pattern or song sends from the master of its playing, which is
where its Mode taps. Buses of the mix can have sends now too.
Found:
- The check "the scheduler plans a looped bar" in e2e 34 wobbles. It
failed in 2 of 5 runs here and in CI task 580 at
|
||
|
adminandClaude Opus 5.5
|
cf96442835 |
Keep the Sound tab smooth while it pans (#360)
Panning the Sound tab drew the whole wave anew on every move, one filled rectangle per pixel column, and gave the ruler's labels new texts whenever a tick left the area. At 2560 px across that took the tab down to 16 fps. - The wave is drawn half the area's width past either side of it. A pan within that moves the drawing. Zoom, height, size or a pan past the margin draw it anew. - The bars of the wave share one fill instead of one fill each. - A ruler label keeps the second it already shows. Before, a pan shifted every label by one and each had to be rendered anew. - A clip's name is given its style only when the style changes. - The rule for what a drawing covers is pure in `waveView.ts` (`shownSeconds`, `drawnSeconds`, `coversShown`). Measured with a copy of the user's project, "Take 1" with 4 clips, 240 pan moves with the middle button, headless on stein2: - 2560x1440: main thread 712 -> 373 ms/s, texts rendered 694 -> 65 - 1280x800: main thread 429 -> 225 ms/s What is left in the profile is Pixi's render pass and the pointer events, which hovering pays as well. Tests: - Unit wave-view: 12 green (1 new), counter-probe red - e2e 34 (stein2, melektaus-atx was down): ALL PASSED, 92 checks (1 new). Counter-probe with the labels given out by position: red, 7 labels set anew instead of 1. - Gate (stein2): 272 files, 4210 tests green Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> |
||
|
adminandClaude Opus 5.5
|
95edf9959b |
Show the clips not picked faint over a sound's wave (#357)
Only the picked clip showed in the wave, between its handles. Where the other clips lay could only be read from the strip above, so cutting one next to another meant looking up and down all the time. - Every clip but the picked one is drawn over the wave as a pale tint with a thin edge, as high as the file reaches. - With the sound picked, all its clips are faint. While a drag spans a clip, that one is left out. - Test hook soundTab.faintClips() names the faint clips. Tests: - e2e 34 (melektaus-atx): ALL PASSED, 91 checks (1 extended) - Gate (melektaus-atx): CHECK EXIT 0, 271 files, 4195 tests Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> |
||
|
adminandClaude Opus 5.5
|
852dce5142 |
Shrink a clip with the wave and drop it with a click beside (#357)
Zoomed out, the wave left room above and below it, but the bright file, the picked clip and its handles still took the whole height. And a click in the wave beside the picked clip kept it picked, so only the strip could take it back to the sound. - fileReach in waveView.ts is how far up and down the file reaches: full scale and its inset, never past the area. At level 1 it is the whole height, zoomed in too. - The bright file, the shade outside the clip and the two handles are drawn within that reach. - A click over the wave beside the picked clip picks the sound. Inside the clip or on a handle nothing changes, and a drag still spans the clip anew. Tests: - Unit wave-view: 11 green (1 new), a counter-check red - e2e 34 (melektaus-atx): ALL PASSED, 91 checks (1 new) - Gate (melektaus-atx): CHECK EXIT 0, 271 files, 4195 tests Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> |
||
|
adminandClaude Opus 5.5
|
42a3759d9d |
Cut a sound into named clips, as a texture into frames (#357)
A sound could only be cut to one stretch, set on the asset itself. To
play two parts of one file, the file had to be imported twice. Now a
sound is always the whole file, and its clips are the stretches of it,
each with a name and a cut of its own.
- A clip is { id, name, props } on SoundAsset.clips. Its id shares the
generator with asset ids, so a sound field holds a sound or a clip,
as a texture field holds a texture or a frame.
- props are the cut: start, end, the fades and their curves, reverse.
Volume, loop, sound FX and bus stay on the sound for all its clips.
The cut rows left the sound's schema for CLIP_ROWS.
- findSound resolves either id. Play sound, the Sample of an
instrument, a Reverb impulse, song items, the scheduler and the test
sound of the Sound FX tab all go through it.
- Every sound field offers each sound followed by its clips, "Kick",
"Kick / Clip 1". A clip that is gone reads as "<id>?".
- The Sound tab has a strip under the ruler with the clips as bands.
A drag there makes a clip, a click picks one, beside the bands the
sound. Only the picked clip has handles. Reverse, fades and curves
in the header work on it and are greyed out without one.
- Whole file is gone from the header, as the user asked.
- Picking a clip is a selection of its own, like a frame. The
inspector shows its name, its cut rows and Delete clip. Delete
takes it away without asking, as with a frame. Ctrl+Z brings it
back.
- Copies get fresh clip ids: Duplicate, Embed a copy, a song
duplicated with its takes, and the copy a split or paste makes of
an embedded take. An item on a clip plays the same clip of its copy.
- A double-click on a song item playing a clip opens its sound with
the clip picked. The Sound row of an item on an embedded take
offers the take and its clips, which no list shows.
- A new take stays the whole sound. Clips are made by hand, as the
user decided.
- No migration in the code, as the user decided. The one project
with cut sounds was changed over by hand.
Deviation from the issue: deleting a used clip does not warn. A frame
does not warn either, and the issue had promised "like a frame".
Tests:
- Unit sound-clips (new): 11 green, 7 counter-checks each red
- Unit sounds, embedded: adjusted to clips, green
- e2e 34 (melektaus-atx): ALL PASSED, 90 checks (3 new, 12 rewritten)
- Counter-check in the browser: clips left out of the sound fields,
the picker check fails
- Gate (melektaus-atx): CHECK EXIT 0, 271 files, 4194 tests
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
|
||
|
adminandClaude Opus 5.5
|
c7fa1d15b0 |
Zoom the height of a sound's wave over its level scale (#357)
The Sound tab always drew the wave at the full height of the tab. Quiet stretches were hard to see, and there was no room above a loud wave. - A level scale in dB stands left of the wave, a mark every 6 dB down from 0, as long as a mark lies inside the area and at least 14 px from the middle. - The wheel over the scale zooms the height, from 0.25x to 16x. Over the wave it zooms the time as before. - What is louder than the area stops at its edge. The fade ramps grow with the wave. - Fit puts the height back to 1x. The tab keeps the height with its view when another tab is shown. - The rules live in waveView.ts (zoomLevel, levelMarks), the hooks give the height, the scale and the top of a full-scale wave. Tests: - Unit wave-view: 10 green (2 new), 2 counter-checks each red - e2e 34 (melektaus-atx): ALL PASSED, 87 checks (1 new) - Gate (melektaus-atx): CHECK EXIT 0, 270 files, 4183 tests Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> |
||
|
adminandClaude Opus 5.5
|
25c1d02b06 |
Keep the audio thread free of ended voices and too many vocoders (#356)
A song that had been played a few times in a long session stuttered at regular intervals until the page was reloaded. A quick run up the keys of a sampled instrument made every sound drop out for a second or two. Both came from work the audio thread should not have had. - Every worklet node of a voice listened on its port. Chrome never collects a port that is listened to, and through its listener not the voice either. Every node of the voice stayed on its bus and was worked on in every block. A way or stage on the worklet now closes its port once it ends or is stopped, and the processor closes its own side when it is told to stop. - A voice without echoes now leaves its bus as soon as its sound and what its stages hold back are through. Before, only a voice with echoes did. - At most 12 ways play through the pitch worklet at once. One more cuts the oldest in 10 ms, a note already let go before one still held. Each runs a phase vocoder, whose first block alone took 2.7 ms of the 2.67 ms a block has on stein2. - Play for the game ends everything the tabs play: the piece holding the transport and every key or preview (`stopPreviews`). - Closing a Sound, Sound FX, Instrument, Pattern or Song tab stops what it plays of that asset (`AssetTabEditor.closed`). - A preset in the Instrument tab plays nothing any more. With Audition on it is heard like any other change. - Test hooks: `__gm.instrument.play`, `__gm.sound.playing`, and `vocoders` in the stats of the sound library. Measured: - A copy of the project, its Song 2 played for 12 s and stopped, six times (Chrome on stein2, CDP WebAudio): before, 746 nodes were left after the first time and 4469 after the sixth, the load at rest grew from 0.01 to 0.06. After, 7 nodes are left every time (the master and one bus) and the load at rest stays at 0.01 to 0.02. - Pitch-player voices live in Chrome on melektaus-atx: 12 take 0.50 of the audio thread, 16 take 0.71, 24 take 0.99. 30 struck 40 ms apart held it at 0.99 from the first second on. Tests: - Unit sound-library: 110 green (3 new), 4 counter-probes each red - e2e 34 (melektaus-atx): ALL PASSED, 86 checks (3 new, 2 changed) - e2e counter-probe with game start and preset undone: their 3 checks red, and the old check of Play note in the game as well, which now counts on the preview being gone - e2e counter-probe with tab close undone: exactly its check red. A first form of it held a key and stayed green, since the keys let go of a held key by themselves once the tab shows no asset - Gate (melektaus-atx): 270 files, 4181 tests Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> |
||
|
adminandClaude Opus 5.5
|
a295d233ed |
Give sounds, instruments, patterns and songs a sound FX (#352)
A sound FX could only be picked where something was played: on a Play
node, a track or an item of a song. A sound that should always sound
through the same effect needed that pick everywhere it was used. Now
the asset says it once, and every place that plays it follows.
- New row Sound FX on a sound, an instrument, a pattern and a song,
right before Bus. A sound goes through it on every voice, an
instrument on every note after its graph, a pattern on all its
notes together and a song on its output.
- The fx input of Play sound, Play note, Play pattern and Play song
and the Sound FX of a song item now read "From the asset" while
empty. None is a pick of its own, stored as `#none` like `#master`.
A pick replaces the FX of the asset, it does not come on top.
- A pattern item's Instrument reads "From the asset" instead of None.
The meaning is unchanged.
- A double-click on a sound item opens the sound, as one on a pattern
item opens the pattern.
- The tabs play through the FX of their asset. The Pattern and Song
tab put it on a bus of their own between the output and the bus of
the asset. The keys of the Pattern tab play there too.
- Notes of a pattern or song go through the FX of their instrument.
Its chain is loaded with the other needs of the sequence.
Decided without asking:
- Old items and Play nodes with an empty fx now mean "From the
asset". No asset has an FX yet, so nothing sounds different.
- The label is "From the asset" as on Loop and Bus, not "From asset".
- A sound used as a Sample, as the impulse of a Reverb or as the test
sound of the Sound FX tab plays without its own FX.
Findings:
- In e2e, `__gm.inspectorField('Sound FX')` and `('Instrument')` find
the group of the Assets panel first. The check asks for the last
match.
Tests:
- Unit asset-fx (new): 8 green. Six counter-checks each turned red.
- Field lists of sound, pattern and song: Sound FX added.
- e2e 65 (melektaus-atx): ALL PASSED, 46 checks (3 new). Counter-check
without the FX bus of the tab: that check red.
- Gate (melektaus-atx): CHECK EXIT 0, 268 files, 4142 tests.
- Not checked: how it sounds, the Sound, Instrument and Pattern tab
in the browser.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
|
||
|
adminandClaude Opus 5.5
|
3a52f2290f |
Mix sounds through buses and a master (#325)
Until now every sound went straight to the speakers. There was no point where all of them came together, so nothing could turn the music down against the effects, and a compressor or a shared echo over everything had nowhere to sit. The bus technique of #346 was there already, only the end of the chain was missing. - Bus asset (Audio): Volume, Sound FX and Into. Into is empty for the master and never offers the bus itself nor a bus that already goes into it. The list is worked out when the menu opens, so a change made meanwhile counts. A loop that is in a project anyway sends the buses on it into the master. - The master is no asset. Its volume and sound FX are two new rows under Master in Project settings, one undo step each. A project written before has 1 and none, which is how it sounded. - Sound, instrument, pattern and song have a row Bus, empty for the master. Play sound, Play note, Play pattern and Play song have an input bus: From the asset, Master or a bus. Inside a song or a pattern only the bus of the song or pattern counts. - Set bus volume (bus, volume, time, easing) and Bus volume. An empty bus is the master. The volume set holds for the whole run, across scenes, over that of the asset. GameRun resets it at start and end. Set sound FX parameters without a voice now reaches the sound FX of the bus picked in its new bus input. - SoundLibrary: the master is the bus "mix", each bus "mix:<id>". Every bus, the playing masters of #346 included, ends there, and only the master is heard. setMix sets them up once a context exists, so an editor nobody listened to opens no audio device. The same mix again changes nothing, which lets the editor hand it over on every change of the project. - The tabs play as the game does: Sound, Sound FX, Instrument, Pattern and Song tab through the bus of their asset and the master. - Pause game does nothing to the buses (the user's answer 4b). A game that wants quiet in its pause menu sets a bus volume itself. - Streaming long music files is #349, split off as asked. Finding on the way: the Into menu first worked from a list made when the inspector row was built. After another bus was sent into the open one, e2e 34 saw it still offered. It is now asked on open. The SoundLibrary tests expected voices to end at the destination. They now end in the master, which adds its input, level and pan to every wiring and two gains to every list. Those expectations are updated, nothing else in them changed. Tests: - Unit buses (new): 15 green. Ten counter-checks, each red on its own: loop check, bus picked, reset at run start, bus of Set sound FX parameters, master volume in the settings, and in SoundLibrary default into the master, voices into the master, run volume over the mix, no context before a play, a playing on its bus. - Unit sound-library: 90 green (5 new). Node catalog: 416 green (9 new cases). - e2e 34 (melektaus-atx): ALL PASSED, 75 checks (3 new). The voice of the Sound tab was heard on mix:<bus>, that bus into the other, that one at 0.5 into the master. Master volume 0.6 via the dialog, undo back to 1. - Gate (melektaus-atx): CHECK EXIT 0, 262 files, 4072 tests. Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> |
||
|
adminandClaude Opus 5.5
|
101b12504e |
Play a sound backwards with a Reverse switch on the asset (#321)
A sound asset can now play its stretch backwards. The switch sits on the asset, so every way the sound is heard plays it reversed: Play sound, a song item, an instrument's Sample and a Pitch in a sound FX. There is no Reverse node in the sound FX graph. The user dropped it, because playing backwards needs the whole sound in advance, which a bus or a Chip does not have. - The cut gets a `reverse` flag, stored as the asset property `reverse` (default off). The cut name ends in `~reverse` when it is on, so a reversed sound over the whole file is a cut of its own. - The handles keep marking the same part of the file. The reversed copy is made once, like any cut, and the fades follow what is heard: Fade in ramps at the end handle, Fade out at the start handle. - The Sound tab has a toggle with a left-pointing play triangle. Its playhead runs from right to left, and the wave draws the ramps at the edges they now belong to. The inspector has a Reverse row. - The icon is a tab header icon (`HEADER_ICON_SVG`, next to the snap magnet), not a top bar icon. The first gate run had it in the top bar set, and the test that fixes that set went red. - A song item draws the waveform of a reversed sound backwards. Lengths stay as they are. - The header label reads "Fade in" instead of "Fade in (ms)" and the fade fields are 8 px narrower. With the new button the readout was cut to "0.03 s of 0..." at 1280 px, now it shows in full. The inspector keeps the unit. Tests: - Unit sounds 22, sound-library 85 (1 new each). Counter-checks: without turning the samples round, without moving the fade in to the end, and without mirroring the peaks, all red. - e2e 34: ALL PASSED, 72 checks (2 new). The reversed stretch starts with the last samples of the forward one, and the playhead ran 0.75, 0.60, 0.45, 0.30, 0.15 over the whole file. - Gate: first run red, 1 of 4031 (the top bar icon list). After moving the icon, CHECK EXIT 0, 260 files, 4031 tests. Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> |
||
|
adminandClaude Opus 5.5
|
29b604dc07 |
Fade a sound's start and end apart, each along its own curve (#345)
A cut sound had one edge fade for both ends, always a straight ramp. Now its start and its end each have a fade of their own, and each fade has a curve of its own. - Fade in (ms) and Fade out (ms) replace Edge fade (ms), 5 ms each by default. Like before they apply only to an edge inside the file. - Fade in curve and Fade out curve each offer Linear (the default), Equal power, S-curve, Exponential and Logarithmic. A fade out runs its curve backwards. - The Sound tab's header has a field and a curve dropdown per edge. Each dropdown shows its curve as a small picture, rising or falling, and names it in its tooltip. With two named dropdowns the header was too wide at 1280 px and cut off the readout on the right. - The inspector shows the same four rows, the curves by name. - The wave draws each ramp in its curve rather than as a line. - A cut plays by <file>#<start>~<end>~<fadeIn>~<fadeOut>~<curveIn>~<curveOut>. - No migration, as asked in the issue: the old fade key is no longer read, so saved sounds start with 5 ms each and Linear on both. Tests: - Unit sounds, sound-library: 96 tests - Counter-check (fade out along the fade in's curve): 1 red - e2e 34 (melektaus-atx): ALL PASSED - 69 checks - Gate (melektaus-atx): CHECK EXIT 0, 256 files, 3978 tests Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> |
||
|
adminandClaude Opus 5.5
|
6b49a0bea7 |
Give each account its own folder of uploaded files to delete (#344)
Uploaded images, fonts and sounds belonged to nobody. Every account saw every file in the pickers, and only an administrator could delete one, through the API alone. Now every account uploads into a folder of its own, sees its own files and nobody's, and can delete a file of its own that no project uses. - Files are stored as data/<kind>/<folder>/<sha256>.<ext>, and the folder is part of asset.file. A name without a folder belongs to nobody. - The folder is a random 12-character name kept in users.json and given with the first upload. Renaming an account moves no file, and a released game's URLs carry no account name. - The list shows the caller's own files and nobody's. An administrator sees all, each with owner and deletable. - DELETE takes the name with its folder. It answers 403 unless the file is the caller's or the caller is an administrator, and 409 while a project, snapshot or release of any account names it (FileUsage). The 409 names the caller's own projects only. - The pickers have a Delete button. The first press asks, the second deletes, and a refusal shows the server's reason. - A deleted account's folder stays and only administrators see it. - tools/migrate-file-owners.php moved every used file into the folder of the account using it (a copy each for two accounts) and rewrote projects, snapshots and releases. A project's revision goes up, so an open editor gets a conflict instead of saving old names back. - Font families are named after the hash alone, so a folder never ends up in a CSS family name. Run on stein2 on 2026-10-07, backup in /root/config-backup-20261007/data-before-344: 25 files used, 27 copies, 8 projects, 53 snapshots and 1 release rewritten, 30 unused files stay nobody's. Afterwards all 600 references resolve to a file in their owner's folder. Found while building: the Delete button cut its new label to "Del…" because a button does not measure itself again on a new text. The picker now lays its button row out again. Tests: - PHP files.test.php (new): 46 checks, counter-check 3 red - Unit core + editor: 220 files, 3403 tests - e2e 34 (melektaus-atx): ALL PASSED - 67 checks (2 new) - Gate (melektaus-atx): CHECK EXIT 0, 256 files, 3977 tests Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> |
||
|
adminandClaude Opus 5.5
|
f1f4a57589 |
Cut a sound to a stretch of its file in its own Sound tab (#343)
A sound asset now opens in a tab that shows its file as a waveform. Two handles set where the sound starts and ends in the file, and that stretch is the sample: Play sound, a song item and an instrument's Sample all play it and nothing else. The file itself is never changed. - The asset has three new rows: Start (s), End (s) and Edge fade (ms). End 0 is the end of the file, the fade is 10 ms by default. Older assets have no values and play the whole file as before. - Every way of playing asks playedSoundOf() for a name instead of the file: the file, or <file>#<start>~<end>~<fade> for a cut. - SoundLibrary makes the cut from the decoded file the first time that name plays and ramps each edge inside the file over the fade. Length and peaks of a cut are read from the file without a copy. - Cut buffers can be made again at any time, so the library lets the oldest go past 64 Mi samples. A voice holds its buffers itself. - The tab draws min/max per pixel from 256-sample block peaks, and the samples as a line when zoomed in far. Wheel zooms, the middle button pans, as in the music tabs. Wave, cut and ruler sit under a mask, so a handle panned out of view does not draw over the panels beside. - Dragging a handle moves that edge, dragging elsewhere spans a new stretch. One drag is one undo step for both edges. Whole file puts the handles back, Play or Space plays the stretch with a playhead. - The inspector preview and the Sound FX preview play the cut too, and the song lanes draw and repeat it. Tests: - Unit: sounds 20, wave-view 8 (new), sound-library 68, plus 258 in the touched areas (instrument, song, pattern, inspector, tabs) - e2e 34 on melektaus-atx: ALL PASSED, 57 checks (7 new) - Gate on melektaus-atx: CHECK EXIT 0, 253 files, 3936 tests Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> |
||
|
adminandClaude Opus 5.5
|
32051b5097 |
Wrap node descriptions and notes in the inspector
A node's description and every note in the inspector were one line cut with an ellipsis. Stop pattern says what it does with no pattern picked, but only past the cut, so nobody could read it. - Label takes a wrap option. It breaks its text at the width it gets and keeps the margin a single line has, above and below all lines. - Widget.heightFor(width) gives the height at a width. It is measure().h everywhere except where text wraps. - VStack and SectionStack lay a column out with it, at the width each row will get. - ScrollContainer measures again at the narrower width when its scrollbar shows, because the text then takes more lines. - addNote and the empty inspector's hint wrap. - The file list's own heightFor(count) is now heightOfRows, so the layout does not hand it a width as a row count. Tests: - Unit scroll-container: 7 green, 2 new (height for width, again beside the scrollbar) - Unit ui + inspector: 17 files, 336 green (before the 2 new ones) - e2e 02 (stein2, atx busy with suite 545): ALL PASSED, 29 checks - Screenshot: Stop pattern shows its description in six lines Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> |
||
|
adminandClaude Opus 5.5
|
32a0af6e2c |
Put the text and boxes of the interface on device pixels
On a screen scaled to 125 % or 150 % the editor looked soft beside a page the browser draws itself. The layout counts in whole CSS pixels, and most of those fall between two device pixels there. The GPU averages both: text loses its edges, and a 1 px line becomes a pixel and a half of mixed colour. Now text and boxes are rounded to device pixels, and a line is one device pixel wide. - ui/pixelGrid.ts holds the rule. crispText() makes a text with Pixi's roundPixels, crisp() does the same for a Graphics of upright boxes, and hairline() is the width of one device pixel. - Every text of the interface is made with crispText() instead of new Text(). - crisp() only rounds where the scale is not a whole number. At 100 % and 200 % nothing changes. - drawControlBox, drawHeaderBar and drawSectionBand draw their lines a hairline wide and flush with the edge. The widgets that draw lines of their own do the same. - Two bands share exactly the line they draw, and a column still ends on a whole pixel. - The stage is nudged by 1/32 px where the scale is not whole. At 150 % every odd pixel is an exact half, and without the nudge one band came out a row shorter than its neighbours. - Curves, icons and everything of the game stay unrounded. Rounding their points would bend them. - The harness takes deviceScaleFactor as an option, and the hooks deviceColumn, edgeContrast and pixelGrid read the frame as the screen gets it. Not in here: the subpixel smoothing a browser gives its own text. Pixi draws a text into a transparent picture first, and there only greyscale smoothing is possible. Measured at 150 %, edge contrast before and after: top bar 31.5 to 47.8, the lists on the left 68.6 to 86.4, inspector 27.6 to 38.4. At 100 % it is 46.5, 90.1 and 37.9, and the picture there is the same as before pixel for pixel, apart from the fps display. Tests: - Gate on melektaus-atx: 206 files, 3114 tests (3104 + 10), exit 0 - Full run on melektaus-atx: 1655 of 1656 checks passed, smokes 24/19/21. The one that failed was a condition of the new step 62 itself: it scrolled an inspector that had nothing to scroll. The step now makes the window lower for that reading. - e2e 61,62 after that fix: 14 checks. The full run was not repeated, and CI is switched off for now. - Ten unit tests, nine in tests/ui/pixel-grid.test.ts - Eight e2e checks in the new step 62, which runs at 150 % - Eleven unit counter-probes fail tests - Four browser counter-probes fail their checks. They ran before the fix to step 62 and were not repeated for it. - Screenshots looked at for 125 % and 150 % Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> |
||
|
adminandClaude Opus 5.5
|
bc688f3efc |
Refactoring round 7: split BehaviorSystem, fewer copies (#85)
Recurring cleanup round over the code since round 6 (
|
||
|
adminandClaude Opus 5.5
|
0e8585665a |
Load the 500 weight and draw missing glyphs as SVG icons (#214)
The theme asks for Source Sans 3 at weight 500, but fonts.ts only
loaded 400, 600 and 700. The browser synthesised the 500 text. The
issue comment also asked for the symbols the font lacks to become SVG
icons. A scan of src/ against the font's cmap found 20 such characters
in 30 places.
- fonts.ts loads source-sans-3-latin-500-normal.woff2 as well.
- Menus draw their ticks and the "current" dot as icons. The dot is a
new MenuItem.current field and no longer part of the label text.
- Inspector action buttons (reset, apply, fit width/height) are
icons. The menu arrow behind them is the drawn Dropdown chevron.
- Kind marks come from a table in markIcons.ts. Picture kinds use an
icon, # and Aa stay text because the font has them.
- Scene marks in the asset panel, sound play/stop and the transition
arrows are icons too.
- Apply is an icon although the font has the arrow. It sits next to
the reset icon and would look different as a glyph.
- A new Icon widget draws on redraw like Button, so Node tests need no
DOMParser.
- Tests find icons through the SVG id. The new hook
__gm.locateIcons(id) and the harness helpers findIcon/clickIcon
replace locate() on the old characters.
Findings:
- Weight 700 is loaded but the theme never uses it. Left as is.
- The old scene-mark check in module 35 accepted any play glyph on
screen. It now checks the mark on the start scene's row.
- Module 44 needs the textures from module 37 and fails without it.
Tests:
- ./check.sh: 145 files, 2187 tests, exit 0 (before 144 / 2143).
- New tests/ui/fonts.test.ts: every theme weight is loaded, and every
character in src/ exists in every shipped face. The cmap reader
matches fontTools (231 characters).
- Icon tests cover the 19 new files. Each kind mark is either an
icon or text, never both.
- e2e 1-16,22,30,34,35,43,44: 586 green, 0 FAIL, then 44 stopped
for lack of module 37. e2e 1-16,37,44,47,48: 618 green.
e2e 1-14 on the final build: 454 green.
- Two new e2e checks: loaded weights in 14, a reset icon pixel in 04.
- Counter-probes all fail as expected: 500 removed, a play glyph put
back, the struct icon removed (one unit test each). In the browser,
500 removed and reset icon hidden fail exactly the two new checks.
- Editor-suite check sum 1312 (1310 measured by CI at
|
||
|
adminandClaude Fable 5.1
|
cc6db5f350 |
Three stores, three importers and three pickers that differ only in their type are one of each (#85)
Refactoring round one: HttpFontStore/HttpSoundStore/HttpTextureStore collapse into a generic HttpFileStore over a FileStore contract; fontImport/soundImport/textureImport share assetImport with an ImportKind per sort; ImagePicker/FontPicker/SoundPicker sit on FilePicker and describe only their row. The group/comment drag logic leaves GraphCanvas for annotationDrag.ts (with its own unit test), declaredRows.ts replaces the duplicated row build in particles.ts and shaders.ts, and dead code in font/sound/compile/emission/transform/actions is gone. README: asset list, check count 958, the two-job CI, the Scenes wiki page. Co-Authored-By: Claude Fable 5.1 <noreply@anthropic.com> |
||
|
adminandClaude Opus 5
|
3b039384c4 |
A search that ignores what a thing is called is no search, so the name wins (#43)
game-maker / suite (push) Failing after 10m23s
Typing "variable" into the node palette landed on `Run behavior`, because the filter weighed label, type and description alike and then sorted by category. `searchRank` in `src/ui/search.ts` now ranks a match: exact label or type, then prefix, then label, then type, and only last a hit that lives in the description alone. Category and alphabet order within a rank. The searchable `Menu` uses the same function, so searching means the same thing everywhere. The `+` menu grew to fifteen entries in declaration order. It is built in two alphabetical groups now -- the types that go into a scene, then the ones that stay in the library -- with a separator between them, the split `isPlaceableType` already draws. `ASSET_TYPES` itself stays untouched: it is also the serialisation and check order. A search flattens the groups and drops the lines. Popups were capped at fixed heights (320 menu, 260 palette, 340 pickers) while the canvas had room to spare. `Popup.roomFor()` measures its own chrome and takes the window height minus a tenth at each end. Placement clamps asymmetrically: the bottom margin is enforced, the top is only a budget, so a menu anchored near the top stays at its button instead of being pushed off it. Co-Authored-By: Claude Opus 5 <noreply@anthropic.com> |
||
|
admin
|
5671a38044 |
A game that stays silent is only half a game, so a sound is an asset like any other (#45)
game-maker / suite (push) Successful in 12m1s
Sounds follow the road fonts already paved: the file goes to the server content-addressed under its sha256, the project keeps a named asset that points at it, and nothing is ever re-encoded. The format is read from the file's own signature, not from what the browser claims - the same .m4a arrives as audio/mp4, audio/x-m4a or as nothing at all. Playing is two nodes. "Play sound" takes the asset and may raise or lower its volume; every call is its own voice, so two jumps in a row are two jumps heard. Its loop input is a choice of three - from the asset, on, off - because a checkbox has to spend one of its two positions on "not set" and would lose a case: an asset that loops could then never be played once. Below the graph core stays browser-free: NodeContext hands out an asset id, BehaviorSystem resolves it against the project and folds the asset's own volume and loop into the call, and only viewport/SoundLibrary knows about Web Audio. A run without a sink plays nothing instead of throwing. The CI browser is muted, so the ear is no witness: the debug hook counts started and stopped voices, and step 34 reads that counter. |