A pointer-up after a drag no longer counts as a click (dragging flag +
press-to-release distance within the existing tolerance), so drag ->
release -> click cannot trigger a reset anymore. PaintHud prefab:
pointer tolerance 4 px, HalfLambert default back to 0.5.
Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
Also serializes wallStepOffset on Player prefab and includes SliderDoubleClickReset wiring in Main (mixed scene edits).
Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
Content pass: new photo textures, picture frames built with
PictureFrameBuilder in the scene, Frame Inner.mat tweak; removed the
now-obsolete photo materials and Paint prefab variants.
Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
Includes the migrated frame values (Inner Depth 0.1, Picture Depth -0.05)
and the usual regenerated SkyboxReflection cubemap churn.
Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
- New TV Video material + environment video clip on the plasma TV
- New P1002728 photo material/texture, P1002712 texture, three new
paint prefab variants
- Living-room prefab variants updated across the set
- Remove stale generated concealment collider PolyShape assets
- The Room scene content pass
Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
Player.mat gets _Saturation: 0 (neutral). PaintHudPanel renames
Slider_HalfLambertBrightness -> Slider_Brightness and adds Slider_Saturation
(range set for the new -1..0..+ semantics).
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
ProbeWall now falls back to a horizontal multi-sample fan across the capsule
cross-section when the center ray misses, so a thin/narrow board keeps its
grab instead of dropping after wallExitGrace (which stays at 0.15). The
top-out mantle no longer commits on the first probe miss: it requires the
top-edge signature (wall at foot, moving up, headroom clear) to persist for
wallTopOutConfirm (new tunable, default 0.06s) and uses hardened multi-sample
foot/headroom probes, so a transient mid-face miss or a VHACD hull gap no
longer triggers a false mantle.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
Refreshed brush atlases (Brushes.psb + hard/soft/square PNGs), new DiscordChaos material + texture, and PaintHudPanel slider range/value tweaks.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
New Paintman-Wall animation and Pose_Wall asset (authored via the UMotion project) added to the Player's pose list. Player MeshPainter textureSize 1024->512.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
FurShell.mat: remove the now-orphaned _FurScaleInfluence serialization.
Player.prefab: _xrayFurStrength tuned to ~0 (fur X-ray glow off).
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
Set GameModeManager.playersCollide to off in Main.unity, retune the
NetworkSimulator preset reference, and pick up the ConversionStatue
prefab's regenerated GlobalObjectIdHash.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
HsvColorPicker: read the color swatch from the SV handle's child
("Handle/Swatch") instead of a standalone root child; drop the dead
leftover-alpha bar and root-swatch fallback handling.
PaintHudPanel.prefab: restructure the picker so the swatch lives under
the SV handle and wire _swatch accordingly.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
Avatar-Setup und HUD-Autoring fuer das Fur-Feature (Code liegt in 1b783a3):
- Player.prefab: FurShellRenderer am Player verdrahtet, furLength-Default 0.5
- PaintHudPanel.prefab: Slider_FurLength + Fur-Panel-Widgets
- The Room.unity: Fur-Testaufbau
- FurShell_Test.mat: Test-Material fuer den Shell-Shader
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
Set occlusion to 0.5 (the new neutral for painted height) so Reset
HUD/Values lands on neutral, and adjust the default brush colour,
metallic/smoothness, active brush and alignment.
Add the occlusion-shift, normal-intensity and parallax-intensity slider
instances to the HUD layout prefab under their stable widget names so the
binder wires them to the painter's material knobs.
Add the BrushesSquare texture, replace the duplicated brush slots on the
player with it, show a brush preview in the paint HUD, and surface the
spawn-area tags and conversion reveal delay in the inspector.
Add the HalfLambert, HalfLambert brightness and specular-damp sliders to the paint HUD panel, dial the camo values on Player.mat, and disable shadow casting on the Paintman renderer so the player's cast shadow no longer gives away its position.
Heavy authoring pass on The Room scene plus lighting/render tuning across
scenes: Lobby gets lower ambient/reflection intensity, softer shadow
strength and a baked lighting data asset; Main and Test Map drop their
lighting data/settings links. Replace the living-room Glass materials with
reworked versions under Assets/Materials, update BrightDaySettings, and set
hunterCount to 0 in Main.
New The Room scene built from the Barking_Dog living room asset: prefab
variants under Assets/Prefabs/3D Living Room, an Environment Light prefab and
baked lighting settings. Point MatchManager at The Room (was Test Map) and
swap it into the build settings scene list. Floor_Wood material and the
living room meta files are reserialized by the URP/Unity importer. Main.unity
also carries the inspector-pinned defaults of the orbit-zoom and hunter-count
fields (matching the C# defaults, no behavior change).
NetworkBootstrap now destroys itself outside the editor. Camera FOV/background
tweaks in Main, lobby light intensity, and paint HUD panel font/color polish.
Two player-controller additions:
NoClimb: colliders tagged "NoClimb" are now invisible to wall-climb and
ceiling-grab. The grab detector (OnControllerColliderHit) and all three
climb probes (ProbeWall, ProbeCeiling, WallInFront) skip them, so such a
surface still blocks the capsule physically but can never be grabbed,
re-probed onto, or treated as a ceiling. WalkableGroundBelow is left
untouched (it only accepts walkable ground). The tag is read from a
serialized field (default "NoClimb"); an empty tag disables the check.
Rescue: a kill-plane fail-safe. The owner captures its spawn point on the
first Update frame (after OnNetworkSpawn's ring offset has landed) and,
if it falls below rescueMinY (-100), teleports back there with all
momentum cleared, toggling the CharacterController around the write like
PlaceOnSpawnRing. Owner-only; the authoritative NetworkTransform
replicates the reset. Runs ahead of the control gate so it rescues in any
mode.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
MouseSensitivity is a static, PlayerPrefs-backed multiplier (default 1,
clamped 0.1-4.0) that scales the mouse-look delta in the FreeCam,
FirstPerson and ThirdPerson controllers. Writes flush immediately so the
value survives a hard build exit. MouseSensitivitySlider binds the
Settings-panel slider to it (range read from the inspector) and mirrors
the value into its label, syncing on panel open via OnEnable.
Main.unity now contains the session-manager canvas directly (the
Online Session Manager prefab was unpacked) and wires the slider binder.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
Mid-match joiners now spawn a dedicated empty Spectator prefab (NetworkObject
+ SpectatorSetup only) instead of a fully stripped Player prefab. The FreeCam
rig is a standalone scene object in Main, so the spectator needs no avatar body,
renderer, collider, or CharacterController -- eliminating the leftover-body
artifact and the fragile per-peer strip path entirely.
- SpectatorSetup.cs (new): owner binds GameModeManager.BindSpectator (FreeCam-only)
- Spectator.prefab (new): empty avatar (Transform + NetworkObject + SpectatorSetup),
registered in DefaultNetworkPrefabs, wired on MatchManager in Main
- GameModeManager: add BindSpectator/BuildSpectatorModes; drop the spectator
branch from BindLocalPlayer; ReleaseToNoPlayer frees the cursor on teardown
- MatchManager: independent entropy-seeded RNG for fair hunter pick (was sharing
the global engine RNG and always landing on the same client); spawn the
spectator prefab for mid-match joiners; cursor-safe return-to-Main teardown
- FreeCamController: guard IgnorePlayerCollision against a disabled capsule
Also bundled (unrelated user asset/UI edits): PaintHudPanel layout tuning,
font atlas (arialroundedmtprocyr_bold SDF), forestpack_foliage material.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
Replace the connection-approval role selection with a server-authoritative
match flow built on NGO additive scene management:
- Scenes: Main is the persistent foundation (NetworkManager, GameModeManager,
cameras, HUD); Lobby and Test Map load/unload additively. Add Lobby + Test Map
to the build settings; remove the obsolete SampleScene.
- MatchManager (plain MonoBehaviour singleton): loads Lobby on server start,
StartMatchTrigger lets the host start the match, rolls one random Hunter (rest
Hider), swaps Lobby -> Test Map (strictly serialized per NGO), respawns each
player as its role variant. Forces additive client sync mode so clients keep
Main instead of single-loading it (fixes "Destination scene is not valid").
- Server-driven spawning: null out NetworkConfig.PlayerPrefab at runtime to
disable auto-spawn, then spawn players after the lobby floor exists (fixes
falling through the floor) with double-spawn and transition guards.
- StartMatchTrigger: server-gated OnTriggerEnter, only the host's own player
starts the match.
- NetworkBootstrap: drop role selection / connection approval; everyone spawns
as the neutral Player prefab. Host/Client/Server/Shutdown buttons stay.
- NetworkPlayerSetup.ScopedModes flag (baked on Hunter/Hider prefabs): lobby
avatar gets the full mode set, match variants get the role-scoped set.
- GameModeManager.BindLocalPlayer reads ScopedModes and rebinds the painter
unconditionally (fixes stale painter binding on respawn -> brush painting in
every mode).
- MeshPainter.PaintingEnabled defaults to false (unbound/pre-spawn/remote never
paints); PaintHud visibility now also gates on a bound painter (fixes the HUD
showing at startup before any avatar exists).
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
Pointer-based per-painter history of the canonical maps with copy-on-write
sharing (only maps touched by a stroke are cloned). A stroke (press..release)
is one step; a Load resets the history to the loaded maps as the sole baseline.
Network sync replicates undo/redo as tiny checkpoint/restore commands instead
of broadcasting full map snapshots: every peer runs the same COW history keyed
by owner-assigned checkpoint ids and reproduces restores locally. A peer that
cannot reproduce a target (undo across its join boundary) requests a targeted
snapshot from the owner as fallback.
Hardening: ordered send FIFO keeps stamps + checkpoints + restores in
production order (a marker never overtakes the stamps it finalizes); stamp
overflow carries over to the next frame instead of being decimated, so remote
content matches the owner; remote always inserts the checkpoint id to stay
1:1 aligned. Owner-authoritative snapshot fallback replaces the silent
host no-op. Adds a logSync toggle (default on) tracing when each
checkpoint/restore/snapshot is sent, applied, or falls back.
Also includes paintings-panel layout tuning in PaintHudPanel.prefab
(inspector edits).
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
adminandClaude Fable 5