a9e0b6d9fa774f3cc10093105e6b2aedde37dedc
119
Commits
| Author | SHA1 | Message | Date | |
|---|---|---|---|---|
  adminandClaude Opus 5.5
|
0701fe3856 |
Share the parts the sound devices and timelines repeated (#85)
Round 12 of the clean-up. Duplicate code had grown from 33 clones (249 lines) after round 11 to 140 clones (1263 lines), almost all of it in the panels and faces of the sound FX devices (#379 to #401). It is down to 57 clones (416 lines) now, and src is 816 lines shorter. - deviceParts.ts holds what the device panels built by hand: the head, rows of knobs, the screen style and the row layout for groups of knobs. Twelve panels use it. panel.knobs stays because the debug hooks read it. - DeviceFace is the base of the twelve faces. It finds the node and does wired, preview, commit, set, hide, reload and audition. compressorWired lives there as paramWired. - TextPool replaces ten copies of "make texts as needed, hide the rest" in the wave and video tabs, the rulers, the piano roll and the song and composition timelines. clipStrip.ts is the clip label strip the wave and video tabs share. - core/util/bytes.ts has the concat that ogg, matroska and avcColour each wrote out. - Dead code is gone: clear on the video players (never called since #402), posterFileOf and videoTimeAt (only tests called them) and easeOut (the same as glide(t, 3)). Values only used in their own file lose their export. - Comments over 125 columns are wrapped, and comments that told the history ("as before", "used to") say what is, in src and in the e2e modules. - Left alone on purpose: AnimationEditor and CompositionEditor share only the play button, and the curve panels are built differently. - Chip now places its boxes through put, which rounds. They were whole numbers already. The three row layouts are byte-identical before and after. - README lists the video and composition assets and the Videos and Compositions pages. Tests: - Gate (melektaus-atx): CHECK EXIT 0, 313 files, 4835 tests. - e2e 25, 34, 64, 65, 66, 69 (melektaus-atx): ALL PASSED, 330 checks. - TextPool without keeping its texts and framesToRoom without making room both go red. Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> |
||
|
adminandClaude Opus 5.5
|
39c509a8e5 |
Keep a video item in a recording when the tab goes back and forth
A recording made while switching between tabs had stretches without the video item and without its sound, and in between the video stood for several frames. Two things went wrong behind another tab. - A player opened there got no first picture. It waited for requestVideoFrameCallback, which Chrome never calls behind a tab. A recording not in real time then waited 3 s per frame and took it without the video. Now the player takes its first picture as soon as it has data while the tab is hidden. - The span of a picture was learnt from steps that skipped pictures. After a time behind the tab it learnt 0.133 s instead of 1/30 s, left out seeks within that span and never corrected it. Now it learns only from steps where the time sought moved at most half a step, so no picture can lie between them. - Behind the tab a seek forgets which picture shows but keeps the span. A landing without a frame counts as the same picture only once the tab has been in front for 500 ms. Found in the user's recording 7ea9146b: 5363 frames, all 1/60 s apart, with the video missing at 10.63 s (8 frames), 43.17 s (5 frames) and 46.93 s (28 frames), and the sound gone with it. Tests: - Unit tests/viewport: 377 green, 4 new or rebuilt. With the old rule and the first picture only by requestVideoFrameCallback both new tests go red. - e2e 68 on melektaus-atx: ALL PASSED, 21 checks. New 68l: a video item that begins behind another tab has its colours exactly, and a tab switched every 350 ms gives colour changes at 0/30/60/90. - One run in five with switches had a change one frame late, so the check allows one frame either way. - Gate on melektaus-atx: green, 311 files, 4824 tests. Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> |
||
|
adminandClaude Opus 5.5
|
abb8fa51d8 |
Keep a recording going behind another browser tab
Chrome stops calling requestAnimationFrame for a hidden tab, and Pixi's ticker hangs on it. The run, the drawing and the recording all stood still as soon as the user switched to another tab. A plain run keeps standing still there, so a forgotten game does not play on unheard. - backgroundBeat.ts ticks the editor from a worker at the recording's fps while a recording goes and the tab is hidden, or the page has not drawn a frame of its own for 250 ms. Once the page draws again, the beat keeps out of the way. - The worker looks every 4 ms whether a tick is due. A 16 ms interval came in bursts behind a busy page, and the recording threw away the second tick of each burst. - backgroundTimers.ts and timerWorker.ts give the short waits of a recording timers in a worker. Chrome slows the page's own timers to once a second in a hidden tab. This covers the waits while saving and the wait for a video's picture after a seek. - Behind a tab Chrome does not call requestVideoFrameCallback, but the picture is there at seeked. The wait there is 10 ms instead of 150 ms while the tab is hidden. - The beat runs for Start recording, the exported game and Start recording... in the main menu. Tests: - tsc, eslint, Prettier clean - tests/viewport: 374 green, 3 new in background-beat.test.ts - e2e 68k (3 checks) on melektaus-atx with the tab really hidden: not in real time all 120 frames, colour changes every 30 frames, the blip 8 ms from green; in real time 97 of 120 frames (73 with the tab in front) - Counter-check without the beat: all three 68k checks red, 3 frames in 60 s not in real time, 7 frames in real time - Gate on melektaus-atx: green, 311 files, 4821 tests Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> |
||
|
adminandClaude Opus 5.5
|
87b2ee9402 |
Record every frame with Real time off on Start recording (#423)
At 4K and 60 fps the user's computer reaches about 39 fps in real time.
Reading each frame back from the GPU takes longer than a frame, and
neither reading back later nor the canvas route helped. With Real time
off the run moves on by one frame of the recording at a time, however
long the computer takes, so the file has every frame.
- Start recording has a new check Real time, on by default. Only the
node records so, the editor recording stays in real time.
- SteadyPace in recording.ts is the pace as a pure class. A step is
1/fps once the frame before is taken and the sound up to it is made,
otherwise 0 and the run holds. A frame's time is its number.
- The sound is made apart, as decided in the issue. AudioSwitch routes
what the run plays to the live library, or to the offline library of
a SteadySound while such a recording lasts. That library has the same
mix, buses, FX and limiter and is rendered up to each next frame.
- A driven video holds at every picture asked for, and the frame waits
for it. Its sound is decoded from the MP4 and played in step through
its bus.
- Two Chrome quirks measured and worked around. A held video hands
over the picture of a seek before seeked, so the frame callback is
asked for when the seek begins. A seek right onto where a picture
begins shows that one or the one before, so such a seek lands half a
millisecond further. Together 30 s became 10.7 s for 2 s of video.
- The notice tells how far the recording has got, and the line at the
end how long it took.
Deviations and limits:
- Input is not ignored, it still reaches the game, which runs slower.
- At most ten minutes per recording. Chrome holds the whole buffer of
the OfflineAudioContext while rendering, 230 MB for ten minutes.
- A free video plays on in real time and does not fit. A sound playing
before the start stays at the speakers.
Found along the way:
- A check in e2e 60 was red since
|
||
|
adminandClaude Opus 5.5
|
4d0a696327 |
Keep composition sound in step and give compositions a bus of their own
A composition's sound ran on the audio clock while its picture ran on the frames. A frame counts at most 0.1 s, so after a hitch the sound stayed ahead of the picture until the next stop. Songs in a trailer drifted off the cut. The items of a composition also had no bus of their own, and a video sprite could not pick where its sound goes. - CompositionSound.follow compares the audio clock with the picture each frame. More than 40 ms apart, it starts the sound again where the picture is. This holds in the tab and in a run. - A time scale other than 1 now restarts the sound again and again. It stays in time but comes in pieces. - The sprite of a video item shows "Driven (by composition)" as a fixed Video clock row. Video time is hidden there, because the composition sets it every frame. - Every composition has a bus in the mix and a node in the master routing. A new one goes to the master unless other compositions are linked elsewhere, apart from where the sounds go. - Audio items pick From asset, To composition, Master or a bus. New items start with To composition. Items saved before keep From asset, so music already sent through a bus does not bypass it. - Video sprites have a new row Video bus: From asset by default, the master or a bus. In a composition the default is the composition's bus, also for video sprites inside a container item. - The chosen bus is part of the key of the video player, so a sprite with another bus gets a player of its own. Found along the way: - Six tests with full lists of sprite defaults expected the old rows and now list Video bus too. Tests: - tsc, eslint, Prettier clean - Unit: 971 green in the 28 files touched - npm run check on melektaus-atx: green, 309 files, 4804 tests - e2e 68 (melektaus-atx): 13 checks green, 68i new. The sound item and the video item go into mix:cp68-cut, which goes to the master. - e2e 69 (melektaus-atx): ALL PASSED, 23 checks, 69q and 69r new. After a hitch of 500 ms the sound restarted twice and then lay 0.5 to 5 ms off the playhead. - Counter-checks in unit tests: without the comparison the hitch test fails, without the bus in the preload the run test fails. Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> |
||
|
adminandClaude Opus 5.5
|
875c76026a |
Silence a free video once its sprite is destroyed (#420)
A sprite whose Video clock is free played its video on after it was destroyed, heard in a game, until the player was let go 2 to 4 s later. A driven one was already held and quiet after 100 ms. - The library holds and quiets a free player nothing asked for in HUSH_MS, as it did a driven one. That covers Destroy, a scene load, the end of a run and a sprite switched off. - Asked for again before it is let go, it plays on from where it was held, heard only in a run. A hidden page leaves it alone, as the sweep does. - A sprite only out of view keeps its free video playing and heard. Whether a video is heard should not hang on the camera. Before, it ran 2 to 4 s and was then let go. Now it plays on, which opens its player even where it was never in view. Tests: - Unit: video-library 1 new. A free player losing its wearer is held and quiet 200 ms later, stays so through a new run, plays on heard when asked again with the same element, and runs on on a hidden page. - e2e 66 on melektaus-atx: ALL PASSED, 36 checks, 66g-ii new. Heard 31 frames before Destroy, held and muted in every frame read after. - Counter-probe without hushing free players: the unit test and only 66g-ii fail, the player plays on heard (paused false, muted false). - Gate on melektaus-atx: 309 files, 4797 tests. Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> |
||
|
adminandClaude Opus 5.5
|
acd12326dc |
Fade sounds and videos in and out on the items of a composition
A trailer needs its music and its clips to come in softly and leave
softly. Until now an item of a composition could only play at one
level, and a video item could not even be turned down on its own.
- Every item with sound gets a grip at its upper left and upper right
corner. Dragging one inwards fades the item in or out. Dragging it
back to the edge removes the fade. Lower down the same edge still
trims as before.
- The fade is drawn as its curve, with the part above it darkened.
The inspector shows Fade in and Fade out in seconds, each with the
curves sound clips already know.
- The model keeps fadeIn and fadeOut in frames plus curveIn and
curveOut on the item. Old projects load unchanged. An item shorter
than its fades plays them cut to its length but keeps the setting.
- Sound, pattern and song items ramp the gain of their own bus. The
scheduler plans the ramps on the audio clock next to the notes.
Starting in the middle of a fade picks it up from there.
- Video items set the new sprite property Video volume each frame.
It multiplies with the fade and is only shown for a driven video.
The player glides to each new level over 15 ms so it does not click
between frames.
Not covered: a container item that carries a video further down gets
no grips. Only a video on the item's own sprite counts.
Tests:
- tsc, eslint, Prettier clean.
- Unit tests for composition, music, song and sound (12 files): 269
passed, 7 of them new.
- e2e 69 on melektaus-atx: ALL PASSED, 21 checks. 69p drags a grip to
a fade in of 10 frames and hears the item bus rise from 0.127 over
0.229 and 0.339 to 1 within one second.
- Counter-checks as unit tests: without the audio ramps, and without
the level on the video sprite in the game, both go red.
- Gate on melektaus-atx: 309 files, 4796 tests passed, 8 more than
at
|
||
|
adminandClaude Opus 5.5
|
f92d69d902 |
Rebuild the Acid node after the acid voice of nodeseq (#421)
The first Acid hardly squelched. Its tanh ate the resonance, and its sweep fell evenly in octaves. The user pointed at the acid tone of nodeseq.com/studio, so the node now follows how that voice is built from Web Audio parts. - The filter is a two-pole 12 dB low-pass with Q in dB up to 17.5, like a BiquadFilterNode. The ladder and its tanh are gone. - One ADSR drives both the volume and the filter. The sweep falls back in Hz, fast from the top and long at the bottom. - Every note glides from the one before. A new note cuts the last one off, and the node plays its release itself. - Knobs: cutoff, reso, env, attack, decay, sustain, release and glide. The defaults are the acid preset of nodeseq. - Accent, slide, drive and tuning are dropped. Old projects were not kept, the user had only placed the node for a try. - A hook __gm.acid.compare renders a line offline through our worklet and through the nodeseq graph, for e2e 34. Found on the way: in Chrome an oscillator that starts inside a render block runs its first samples at 440 Hz. The comparison evens this out. Tests: - tsc, eslint, Prettier clean - Unit: acid.test.ts rewritten with 12 tests. chip-presets and sound-library follow the new node. - e2e 34 on melektaus-atx: ALL PASSED, 148 checks. Against nodeseq the loudness per 10 ms window is at most 0.14 dB apart, and 95 to 97 % of the windows are equally bright. - With a linear Q instead of Q in dB the comparison is red. - Gate on melektaus-atx: green, 306 files, 4752 tests. That is 4754 less the 14 old and plus the 12 new Acid tests. - Not checked: the sound by ear, the master chain of nodeseq, the keyboard and a bake with the new node. Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> |
||
|
adminandClaude Opus 5.5
|
d844f2734a |
Add an Acid instrument node for TB-303 style bass lines (#421)
The instruments could only come near a 303 with a Chip, a Filter and two envelopes. The biquad filter does not saturate, every note strikes anew, and there was no slide and no accent. - Acid is a new instrument node that plays a saw or a square through a four-pole ladder low-pass with tanh saturation, oversampled twice. Knobs: cutoff, resonance, env mod, decay, accent, tuning and slide time. - An accent comes from the velocity, from 0.9 on. It is louder, opens the filter further with a shorter decay, and accents close behind each other build up. - Two notes that touch or overlap slide. Each note stays a voice of its own, so the scheduler is unchanged. The notes of a line share one synth in the worklet, and the new voice takes it over from its first sample on. - The node sets its own volume, so it needs no envelope behind it. - The graph shows it as a device with the filter curve at rest and at the top of the sweep. - A preset Acid Bass puts an Acid in front of a short echo. Tests: - tsc, eslint, Prettier clean - Unit: 14 new tests in acid.test.ts for pitch, low-pass, resonance, sweep, accent, slide and the handover between two voices. - e2e 34 on melektaus-atx: ALL PASSED, 148 checks (3 new). The handover sits on sample 4800 and jumps by 0.0012, of three notes only the second slides. - Without the handover, or with a slide that strikes anew, the unit tests are red. - Gate on melektaus-atx: tsc, eslint, Prettier clean, 4753 of 4754 tests green. The red one was sound-library.test.ts, which did not know the new slid count in the stats. Fixed, and the file alone is green again with 128 tests. No second full gate. - Not checked: the sound by ear, slide at the keyboard, a bake with Acid, the CPU load of many notes. Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> |
||
|
adminandClaude Opus 5.5
|
65d7bf6a1f |
Silence a composition video as soon as its item ends
A video in a composition plays on a driven player that the item tells where to stand every frame. When the item ended, its object was gone and stopped asking, but the player ran on with its sound until it was let go for being unused. That took 2 to 4 seconds, and in a pause it never happened at all. The same held for the composition preview. - A driven player nobody asked for in 100 ms is now paused and muted. When its wearer comes back it carries on where it should be, as before. It is still let go after 2 to 4 seconds. - A player still without its first picture keeps playing, without sound, because it only gets that picture by playing. - Leaving the animation or composition tab now silences their video preview at once instead of after 2 to 4 seconds. - Free videos (Video clock free) keep the old behaviour. A sprite destroyed by a behavior is still heard for 2 to 4 seconds. Tests: - Unit video-library: 10 green (1 new). Without the new timer the new test is red. - e2e 68: ALL PASSED, 11 checks (68g new). An item of 0.5 s with a 2 s video plays audibly while it is there, and the player is paused and muted in every frame from about 200 ms after it ends. - Gate on melektaus-atx: green, 305 files, 4737 tests. Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> |
||
|
adminandClaude Opus 5.5
|
93190e185c |
Route a video's sound through its own Master routing node
An editor recording had no sound while the video tab played a video. The tab played its <video> straight to the speakers, past the Web Audio graph, so the recording tap behind the limiter never heard it. Fixing only that would have left videos as the one sound source the Master routing cannot reach, so they get their own node, like sounds. - A video asset with sound has a routing node labelled "Video". One without sound has none, it would have nothing to send. - Its links take the sound after volume and FX. Several links or another level give the video its own bus, as with a sound. - A new video follows the bus most other videos use. With none linked yet it goes to the Master, not to where the sounds go. Songs and sounds no longer follow videos either. - Players only know their file, so videoBusesOf maps each file to the bus of its first asset. setMix takes that map and moves the gains of running videos at once when the routing changes. - In the game, played in the editor or released, a video's sound follows its links. The tabs (video, composition, animation preview) play straight into the Master, as the sound tabs have since #368. - The video tab's sound now goes through the Master, so its volume, FX and limiter apply there and the editor recording hears it. - The recording badge beside the menu is an HTML element over the canvas now. The second render that drew it on the desynchronized canvas let the screen show a frame without it, so it flickered. The element is never in the copy, and clicks go through it. Tests: - Unit master-routing and sound-library: 3 new, green. Red without video in the routing kinds, without moving the gains, and with the old rule for the links of a new video. - e2e 66e-iii: the tab plays a video linked to a bus, the level is 0.09 on the Master and 0 on the bus. 66g: in the game the bus has 0.09. Both red with the old ways. - e2e 67e reads the badge from a real screenshot, still green. - The README names 2043 e2e checks. - Gate on melektaus-atx: 304 files, 4694 tests green. Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> |
||
|
adminandClaude Opus 5.5
|
c0ba2673ba |
Keep the video tab's picture following while scrubbing (#417)
Scrubbing in the video tab set currentTime on every pointer move. Each new seek aborts the running one. With a large video a seek takes longer than the gap between two moves, so none finished and the picture froze. The composition tab never had this, because its players run through the VideoLibrary, which only keeps the newest wish while a seek runs. - The pending-seek logic moves into a shared helper, src/viewport/videoSeek.ts. The VideoLibrary uses it unchanged. - The video tab seeks through the same helper and uploads the picture again after each finished seek. - Play drops a pending scrub wish. Otherwise the video would jump back right after it starts. - Scrubbing before the first picture no longer jumps back to the time the tab opened with. The video stays at the last chosen time. Tests: gate on melektaus-atx green, 303 files, 4681 tests (2 new in video-seek). e2e 66 ALL PASSED, 30 checks. Without the helper the new unit test is red ([0.1, 0.2, 0.3, 0.4, 0.5] instead of [0.1]). There is no browser check for the freeze itself, the test video seeks too fast to show it. Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> |
||
|
adminandClaude Opus 5.5
|
b2b4cbad28 |
Keep a video's loading out of recordings and first frames (#417)
A Start recording right after Play composition still began with empty frames. The composition's clock waited for its video, but the recording went on and took every frame while the video loaded. A clip that starts later in the video also slipped through, because its player already had one picture while it still sought to the clip's start. - The view now counts every video sprite it leaves out as missing, not only one without any first picture. - GameRecorder takes no frame while the game view misses a video, for at most VIDEO_WAIT_MS (3 s) at a time. The recorded time stands and the sound of that time is dropped, so it stays in sync. - RecordingClock.start forgets a hold from before the first frame. Without that, the first real frames all got the time 0. - A followed player starts at 1x until the first speed reading. Before, it paused and sought every frame for about 100 ms, so the first pictures after a wait stuck and then jumped. A step faster than 4x and a time running backwards do not count as a start. - Test hooks: __gm.gameVideo(id) reads the game view's own player, TakeInfo.lastFrameAt shows when the last frame was taken. Tests: - Unit recording (clock after an early hold), video-follow (2 new, 1 adapted): 449 green in tests/core/recording, tests/viewport and tests/core/composition* - e2e 68e (a clip from 0.8 s shows that picture first and then plays), 68f (a recording that already runs takes no frame while the composition's video loads) - 68e is red without the start at 1x, 68f without the hold - README: 2038 editor checks Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> |
||
|
adminandClaude Opus 5.5
|
36ffd9a61a |
Land a driven video's seek without a frame so it is never empty (#404)
Since
|
||
|
adminandClaude Opus 5.5
|
3a1e420806 |
Read a driven video's speed on the frame clock so 1x stays 1x (#404)
A driven video measures how fast its wearer's time runs and sets its playbackRate from that. The time moves on with the ticker, but the reading took its clock from performance.now() while drawing. A frame that had more to do before the draw shifted that clock against the time, and a 1x animation read as up to 1.09. Outside 0.9 to 1.1 the video goes mute, so the sound could drop out for a moment. In CI this made e2e 66k red now and then. - VideoLibrary reads the speed with the timestamp of the frame (document.timeline.currentTime), the same clock the time runs on. It falls back to performance.now() where there is no document. - debugInfo() reports the measured speed of a driven player. - e2e 66k checks the measured speed and the correction of the rate apart. The rate alone may differ from 1 by up to 10 percent on purpose, so checking it at +-0.1 was too strict. Tests: - Unit video-library: 8 tests green, 1 new. With performance.now() back in place the new test is red and reads 1.089. - e2e 66 on melektaus-atx: all passed, 27 checks, speed 1.000 in all 5 readings. - Gate on melektaus-atx: CHECK EXIT 0, 297 files, 4562 tests. Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> |
||
|
adminandClaude Opus 5.5
|
dd60a795e1 |
Wait for driven videos before a run starts so no sprite flashes (#404)
The game view opens a player for each driven video only when it draws, and it draws only while its tab is visible. Without a detour over the Game tab the players came up with the click on Play. Until a video had loaded, its sprite showed its base colour, white in the user's cut. Sharing the players of the scene view would not have helped. From the Animations tab those are discarded after two to four seconds. - Play holds the run at second 0 until every driven video in the game view has its first picture, at most 3 s. The status line says "Loading the videos… · Esc stops". - The game clock stands while it waits. Behaviors and sounds start only after it, so picture and sound stay together. - Load scene in a running game waits the same way. - A driven video without a picture is not drawn at all instead of white. That holds everywhere, also on a switch to the Game tab without Play and at a cut whose video is not ready. - The exported player waits the same way. - __gm.playInfo() reports waiting for the e2e check. Tests: - e2e 66p puts the sprite in front of the camera and waits 4.5 s so the game view has no player left. Then it reads every frame of the run: 14 frames of waiting on #22252c at time 0, then blue, no white. - Against the old code 66p fails: 14 frames #ffffff, then blue. - Unit video-library: 7 passed, 1 new for loading(). - e2e 66 on melektaus-atx: ALL PASSED, 27 checks. - Gate on melektaus-atx: exit 0, 297 files, 4558 tests. - tsc, eslint, Prettier clean. Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> |
||
|
adminandClaude Opus 5.5
|
43fd22a763 |
Keep a driven video ready while its sprite is off (#404)
A cut between two videos flashed white: the sprite switched on had no picture yet, because its player only opened then or had been dropped meanwhile. A driven video now waits muted at its time while its sprite is off, in the editor and in a run. - A disabled sprite with Video clock Driven asks for its player without drawing it. A Free video still opens when shown. - A run's draw list keeps disabled driven sprites, marked as off. Before, collectWorldItems dropped every disabled object, so the game view never held a player for them. - VideoLibrary.wear() counts as asking. The sweeper dropped a held player after 2 to 4 s and it was loading again at the cut. - The speed of the asked time is read over a window that grows to 500 ms. Over 100 ms one 1/60 s step more or less read as 17 % off, the playback rate jumped and the sound dropped out. - A stream feeds every packet it has loaded to the decoder at once and waits once. One round trip per 20 ms packet let the decoder fall behind on a busy main thread, which made e2e 34 flaky in CI. Tests: - Unit streaming, video-library, video-follow: green, 4 new - e2e 34 + 66 (atx): ALL PASSED, stream skipped 0, 66m new - e2e 66 (atx), two runs: ALL PASSED, 25 checks, 66n new - Gate (atx): CHECK EXIT 0, 297 files, 4557 tests - Counter-checks: without the draw list fix 66n finds no player, without the wear() fix and with the old speed reading the new unit tests turn red Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> |
||
|
adminandClaude Opus 5.5
|
c9e8a3f6ac |
Let an animation drive a sprite's video picture by picture (#404)
A video used to run on its own clock as soon as a sprite wore it. An animation could switch the sprite on and off, but never say which picture shows at which frame. Cutting a video in an animation needs the opposite: the animation sets the time and the video follows. - Sprites wearing a video or a clip get two rows, Video clock and Video time. They show only while the texture holds a video. - With Video clock on Driven the video does not play by itself. It shows the picture at Video time, counted from the clip's start. Past the end it goes round with Loop and holds the last picture without. - Video time is a number like any other, so keys, step, easing and curves give stills, slow motion and ramps. - A driven sprite gets a player of its own, keyed by the wearer's name. The same clip can run twice at different times. - Following has two ways (`videoFollow.ts`). Running forward at 0.25x to 4x the video plays at that rate and is nudged. A still, a scrub or a step backwards seeks, and only the newest seek counts. - Sound is heard only near 1x. The animation tab now plays it too, so a cut can follow the sound. Scrubbing is silent. - Scene, game view, the inspector's PREVIEW and the shader preview show the driven picture. In a running game Play animation sets it. Found on the way: - After a scrub the video in the animation tab kept running. The preview redrew only while the playhead moved, so nobody asked for the video once it stood. `AnimationEditor.tick` now redraws it every frame while it shows a video. - Every sprite has two more defaults (`videoClock: 'free'`, `videoTime: 0`). Eight tests in five files pinned the old list and are updated. Tests: - Unit: video-clock and video-follow new, 4 files with 42 tests green. - e2e 66 (melektaus-atx): ALL PASSED, 22 checks, 3 new. 66i: two sprites on one clip stand at 0.2 s red and 0.7 s green. 66j: a scrub to frames 2, 7, 12 and 3 shows red, green, blue, red, and each colour still stands 0.7 s later. 66k: playing runs 10-30 ms behind at rate 1.00-1.03 and is not muted. - Counterchecks: a seek that keeps the rate turns the seek test red. Not seeing Driven turns 66i, 66j and 66k red. - Gate (melektaus-atx): exit 0, 297 files, 4546 tests. - Not tested in the browser: Play animation in a running game. Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> |
||
|
adminandClaude Opus 5.5
|
c815d2c35f |
Keep a playing video when the window comes back to the front (#402)
Chrome draws no frames for a hidden page, so the scene stopped asking
for its videos. The sweeper of the VideoLibrary kept running and
dropped every player after 2 s. Back in the window, the video started
over, and Pixi warned that a texture source was destroyed while still
bound to a shader.
- The sweeper skips a hidden page. The time hidden does not count as
idle, the 2 s start once the page is shown again.
- A dropped player only unloads its video source instead of destroying
it. A shader that still holds the source no longer warns.
- CI serves videos through a new router for php -S. The built-in
server answers no Range requests, so Chrome could not seek. e2e 66
had 4 red checks in the suite job of
|
||
|
adminandClaude Opus 5.5
|
28909f0adf |
Show a Limiter node as a device that holds what it took away (#397)
A Limiter only said what it does in rows of numbers. How much it took away, and when, could not be seen at all, and a short sound is over before any needle could show it. Now the node is a device of its own size, and its screen catches the reduction from the moment a sound starts and holds it once the sound ends. - LimiterPanel draws a 720x280 plate of brushed brick. The threshold knob is large, ceiling and release are small beside it, auto-gain is a lever. A LIMIT lamp lights while it takes something away. - The screen hangs the reduction down from the top, 0 to 24 dB by the square root like the Compressor's meter. The level coming in runs along the bottom, orange above the limit. Time runs from the start of the sound over 1, 2, 4 or 8 s, and a longer sound rolls. - ReductionCapture in limiterView holds the capture after 0.4 s of silence, without the silence, until the next sound. It writes the most taken away and when, and NOW or LASTED on the right. - The Limiter is tapped now, like the Compressor. The face reads the loudest sample since the last frame on both sides. - SpectrumTaps.levels takes a lateBy. The side in front is read 5 ms earlier, so a peak going in is met by what it became. - limiterReduction leaves the auto-gain out and solves Wet's blend for the limited part. Less than 0.2 dB counts as none. - A capture is also held when the node leaves the picture. Changing a knob or the lever leaves it as it is. - Hook __gm.limiter.panel(id) for the sound FX and instrument graphs. Decided myself: - The capture stays held until the next sound, not for a fixed time. - The screen has no wet knob, as the Compressor's has none. - The Limiter's two taps cost two gains of 1 per voice. The analysers only exist while the node is in the picture. Measured on stein2: the seeded blip at -4.4 dBFS against -12 dB showed 7.56 dB. Three hits at 0, -8 and -2 dBFS showed 11.9 dB at the first. In e2e 34 on melektaus-atx, -10.44 dBFS in against -20 dB showed 9.56 dB, the difference to the hundredth. Tests: - Unit: limiter-view 13 tests (new), spectrum 6 (1 new), soundfx 67 with the Limiter's taps. - Counter-test: without Wet's share in the formula the blend test fails. - e2e 34: ALL PASSED, 138 checks (1 new). - Gate: CHECK EXIT 0, 290 files, 4445 tests. Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> |
||
|
adminandClaude Opus 5.5
|
8c53ce0cbe |
Replace the 5-Band-EQ with the Parametric EQ and remove it (#395)
The Parametric EQ does all the 5-Band-EQ did and more, so the editor keeps only one EQ. The old node was used in one project only, with nothing linked to its band inputs. - "Garden of Sacrifices" was converted once on the project file, not by a load migration (#137). Its 5 nodes are Parametric EQs now with the same filters: low shelf 80 Hz, peaks at 250 Hz, 1 kHz and 4 kHz with Q 1, high shelf 12 kHz. A band at 0 became no band. - Two values below -24 dB were held to -24, as the Parametric EQ goes no further. Both are in the asset "Delay" (high -60, low -36). The user will rework them by ear. - The write went through the API's own Store (lock, revision 20181 to 20182), so a tab with the old revision gets a 409 instead of overwriting it. - Removed with the node: its stage kind "filter" and the type FxFilter, which nothing else made, and the player's branch for it. A Pan is now the last branch of fxNodes, a Flanger that of stagesOf. - Tests that took the 5-Band-EQ as "some effect" use the Pan or the Parametric EQ now. The test for a parameter feeding a band now feeds the cutoff of a Filter, which had no such test yet. - A project that still names the type, such as an old snapshot of "Garden of Sacrifices", loads without those nodes. Unknown types were always left out on load. Tests: - Unit (stein2): soundfx 67, instrument 36, envelope 13, sound-library 127, all green - Counter-check: with the cutoff not taken from the parameter, only the new Filter test goes red - The converted project loads and compiles: Delay, Vocals and Drums play their bands (3+1, 4 and 5) - e2e 34 (atx): ALL PASSED, 136 checks, the palette check now looks for the Parametric EQ - Gate (atx): CHECK EXIT 0, 288 files, 4417 tests Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> |
||
|
adminandClaude Opus 5.5
|
3f7eb03143 |
Check what a streamed sound holds by the library's own count (#378)
The e2e check that a streamed sound costs less than a decoded one compared how much the renderer process grew. Alone, module 34 saw it grow by 1 to 8 MB while streaming. After the 33 modules before it in CI it grew by 25 to 66 MB, and suite went red (CI tasks 611, 614 and 617, the last with 66.7 MB streamed against 95.9 MB decoded). - SoundLibrary.stats tells decodedBytes, the samples of every file decoded whole, and streaming.held, every head of a copy and what is sent ahead to the worklet. - StreamFile.headBytes and StreamFeed.ahead give their share. - The e2e check now asks the library: streamed it holds less than 4 MB more than before and nothing decoded whole, decoded it holds more than 40 MB, the five minutes being 50 MB at 44.1 kHz. - The growth of the renderer stays in the log of that check. The counter-proof that the renderer grows by more than 40 MB when the sound is decoded stays as it was. Tests: - Unit sound-library: the streaming test also checks the bytes held. - e2e 34 (melektaus-atx): 136 checks. Streamed 0.76 MB more held and none decoded whole, decoded 50.5 MB. The renderer grew by 4 MB and 49 MB. - Gate (melektaus-atx): 288 files, 4416 tests. Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> |
||
|
adminandClaude Opus 5.5
|
2d4909d248 |
Fit the Compressor's tab to any size, make auto-gain a switch (#378)
Two things came up on the new tab. Floated and sized down, it spilled its knobs out of its window, and sized up it left the window empty. Auto-gain lifted far too much: it brought 0 dB back to 0 dB, which at -40 dB, 4:1 and knee 6 is +28.1 dB, so a sound at -24 dB came out at -6 dB. And as a knob from 0 to 1 it blended between makeup and auto-gain, so at 1 the makeup knob did nothing. Layout: - The knobs stay on the bottom line, centred, with the help line above them. - The levels fill the height left above. The curve is a square at their right, centred up and down. It grows with the tab from 180 to 360 px and takes no more than 40 % of its width (picturesLayout). - A floated window cannot be sized below what its pane needs. A pane says so in its minWidth and minHeight, and the Compressor's is every knob and the smallest pictures. Other panes keep 320 x 200. - A pane put into an open window that is too small grows the window. Auto-gain, as decided in #378: - A Compressor's auto-gain gives back what it takes from a sound at -18 dB, so that one comes out as loud as it went in. At the numbers above that is +14.6 dB. - Auto-gain is a switch on the Compressor, the Limiter and the Saturation alike, a setting and no longer an input. The makeup or output is added on top of it instead of being blended with it. - A project from before reads a number as on above 0. Nodes never set keep their defaults: off on the Compressor, on on the other two. - The tab shows the switch at the right of the knobs, with the dB it gives below it. With it on, the curve has a line at -18 dB from the curve up to the diagonal. - Every level reading keeps the gain of its time. Before, the whole picture was read by the current makeup, so after a change the tinting of the last seconds was wrong or missing. Findings: - My first e2e run of the layout clicked Dock where it was before the window was sized up, so the window stayed open and the next check went red. The check reads the button again. Tests: - Gate (melektaus-atx): 282 files, 4344 tests (6 new) - e2e 34 (melektaus-atx): ALL PASSED, 118 checks (2 new) - Offline in Chrome: a sine at -18 dB through -24 dB and 4:1 came out at -17.92 dB with auto-gain on and -22.42 dB with it off. - Counter-checks: the curve set at the top instead of the middle, and every reading read at a gain of 0, each fail exactly their test. - Looked at the window in screenshots: at its least every knob and the switch show. At 1280 x 797 the levels fill the height, the curve is centred at the right and the knobs are at the bottom. Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> |
||
|
adminandClaude Opus 5.5
|
1df38bd430 |
Edit a Compressor in a tab of its own, with knobs and levels (#378)
A Compressor had only its number rows in the node. Its numbers are
easier to set by feel on a dial, and what it does is easier to judge
when the level going in and the level going out are seen side by side.
- Knob is a new widget in the toolkit: a slider bent into a circle,
its name above and a number field below. A drag up or down turns
it, Shift a tenth as far, a notch of the wheel a fiftieth of the
turn, a double-click sets the default, the number takes a typed
value. A taper gives the low end more of the turn.
- The Compressor's tab opens on a double-click, one per node, like
the Parametric EQ's. It has a knob for each of the seven numbers,
greyed while its input is linked.
- Its curve shows level in to level out from -60 to 0 dB. The point
where it bends sets the threshold, the end of the curve sets the
ratio that ends there.
- Its levels show the last 4 s on both sides of the node. Where it
takes more than 0.5 dB away, the stretch below the level coming in
is tinted. The makeup is left out of that.
- The Compressor is tapped like the EQ. SpectrumTaps listens to more
than one node at once and reads the loudest sample of the last
25 ms on each side.
- The node tabs share one map in the editor (nodeTabs), so a third
kind needs no new plumbing.
Findings:
- CI task 614 for
|
||
|
adminandClaude Opus 5.5
|
82e96e680f |
Decode a clip from a file of its own, not its whole sound (#349)
A clip was cut from its sound's file, so a game decoded the whole file for it and held it for as long as the page was open. A long recording played through a few short clips cost the recording. Every clip now has a copy of its cut as Opus, with Stream on or off, and a game decodes that instead. - StreamKeeper makes the copy of each clip whether its sound streams or not. Stream only decides whether a sound gets a copy of its own. - clipCopyTable says which cut decodes from which copy. The sound library loads the copy for a clip unless the whole file is decoded already. Then the clip is cut from that as before. - projectFiles decodes the whole file ahead only where something may play the sound itself: no clips, a clip without a fitting copy, or the sound's id anywhere in an asset that can name one. That last test walks the data, not the fields, so no place is missed. - A copy that cannot be had falls back to the whole file. A library that bakes keeps to the whole files, as the bake's fingerprint does. Tests: - Gate: CHECK EXIT 0, 280 files, 4319 tests (7 new: streams +4, sound-library +3). - e2e 34: ALL PASSED, 108 checks (2 new). With Stream off a fresh library decodes the ten-second reversed clip's copy and not the five-minute file. It is the cut made from the original to within 0.0091 a sample and 0.013 dB in any 20 ms. Once a node plays the sound itself, the whole file is decoded ahead again. - e2e 65: all passed with this change. - Counter-checks red as they should be: the library ignoring copies, the whole file always decoded ahead, clip copies only with Stream. Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> |
||
|
adminandClaude Opus 5.5
|
2764919bb8 |
Stream long sounds from an Opus copy instead of decoding them (#349)
A sound was decoded whole as soon as the project opened, in the editor and in a released game: five minutes of stereo held some 115 MB for as long as the page was open. A sound with Stream on now plays from a copy as Opus in Ogg, fetched a piece at a time and decoded a few seconds ahead by WebCodecs, so a game holds a few megabytes for it. - The Stream switch is a row of the sound, off by default. The Sound tab suggests it from a minute on and says how far the copy has got. - StreamKeeper makes the copies in the browser, a moment after the last change, one at a time: the sound's own and one per clip of its cut, fades and Reverse baked in. A copy that is no longer wanted is taken off and deleted once the project is saved without it. - streamTable says which played names stream from which copy. A clip without a fitting copy, a Sample and a Reverb impulse stay decoded. A sound with Stream on is never decoded ahead. - The page fetches by Range and takes the whole file from a server that ignores it, as the CI's PHP server does. It keeps the bytes and the first two seconds decoded, the rest goes four seconds ahead. - A jump decodes 32 packets before the place first. Measured in Chrome, what follows is then the same to the bit as decoding from the start. With 4 packets it was 0.06 off. - The stream-player on the FX worklet reads the samples at the rate of the context along a Catmull-Rom curve. What comes late is silent and skipped once it is there, so a clip keeps its beat. - The opening stretch goes with the player as it is made. Sent by message it came a few milliseconds late, and 557 samples of the attack were lost. - Pitch on a streamed sound is a shifter after the player, as on a bus: the length stays and it is heard 42.7 ms late. - Bakes of patterns and songs (#340) always stream now. - The song timeline draws a streamed sound from its copy decoded at 8 kHz, keeping only the peaks. Tests: - Gate: CHECK EXIT 0, 280 files, 4312 tests (31 new: ogg +3, stream-queue 6, streams 11, streaming 6, sound-library +5). - e2e 34: ALL PASSED, 106 checks (7 new). Five minutes of mono, 4.8 MB as WAV, 3.6 MB as its copy: streamed the renderer grows by 5.8 MB, decoded by 69.6 MB. Offline at 48 kHz, start, loop seam and a reversed clip are the copy decoded whole to the sample (0). - Counter-checks red as they should be: no pre-roll, no catch-up of late samples at the end, no opening stretch, a streamed sound decoded ahead. Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> |
||
|
adminandClaude Opus 5.5
|
84cd36f902 |
Bake a pattern or song to Opus, played in its place by a game (#340)
A pattern or song played by a game runs every note through the scheduler, the instruments and their FX, live. Bake works that out once, keeps it as a file on the asset, and Play pattern and Play song play the file instead, as one voice, for as long as nothing it is made of has changed. The tabs always play live. - Bake is an icon in the header of the Pattern and the Song tab, lit while the bake holds. A click bakes, cancels a bake that runs, or offers Bake again and Remove bake. The toolbar shows the progress. The info of the tab says "baked" or "bake outdated". - The bake holds everything up to the output of the pattern or song. The sound FX of the node, fx params, volume, fade in, bus, Master routing and stopping with a fade stay live. - A print of the worked-out plan decides whether it holds: notes and clips, tempo, length, loop, tracks, the build of each instrument for each note, sound FX, files, cuts and levels. A rename keeps it, an undo back to the baked state makes it hold again. - The file holds the straight run and then one more round of the loop as heard the second time, tails included. Looped, it plays to the loop end and then round that round, to the sample. Once, it fades out over its last 10 ms. Let ring fades it out over 0.3 s. - It is worked out by a second SoundLibrary on an OfflineAudioContext, its scheduler woken by suspends of the offline clock, and what reaches the master is taken. A worklet probe tells whether that was mono, so a mono bake goes on exactly as the notes did. - Opus in Ogg, 160 kbit/s stereo or 96 kbit/s mono, encoded with WebCodecs, the Ogg pages written by hand. Normalized to full scale, the peak kept and played back. - The file goes up into the sounds of the account as "[bake] name", which the sound picker leaves out. An old bake file is deleted once the project is saved without it. Only a bake that holds is loaded. - Ogg files are decoded at 48 kHz: resampled to 44.1 kHz, the loop of a bake lost a sample a round. - Baking and removing a bake are no undo steps, like the EQ's zoom. Findings: - Chrome's AudioEncoder refuses opus.format 'ogg' (NotSupportedError) but hands out the OpusHead with a pre-skip of 312 for 'opus'. - The Song tab's header is full at 1280 px: a captioned Bake pushed Fit off the tab. Hence the icon. Tests: - Unit: tests/core/ogg.test.ts (6), tests/core/bake.test.ts (16), four new in sound-library.test.ts, one in song-play.test.ts. One test cuts, reverses and fades a clip on a song's track: each change outdates the bake, each undo makes it hold again. - e2e 64 (melektaus-atx): ALL PASSED, 36 checks (6 new). Live and baked rendered offline differ by at most 0.06 dB over 114 windows of 20 ms, two loop ends among them. e2e 65 had no red check with the icon in its header. - Gate (melektaus-atx): CHECK EXIT 0, 277 files, 4281 tests. - Counter-checks: print without instrument builds, print taking the sound's file instead of the clip's cut, round taken from the first pass, bake voice without its looping source, Play pattern or Play song ignoring the bake: one unit test red each. Pre-skip set to 0: the e2e comparison 4.8 dB off, only that check red. Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> |
||
|
adminandClaude Opus 5.5
|
687377682c |
Draw the EQ's curve in its node and a spectrum behind it (#375, #374)
Both were asked for in #367 "for later". The node of a Parametric EQ now shows its curve in small, and its tab shows what passes the node while it is seen. #375, the curve in the node: - NodeDef has an optional `picture`: a height, and shapes made from the settings as plain point lists (guide, area, line). It is general, the Parametric EQ is its first user. - NodeView draws it in a box below the rows, again only when the box or the settings change. A drag in the EQ tab changes them, so the node follows it live. - Without a band the box stays, flat on its 0 dB line, so the node does not grow at the first band. - The axes of the curve, `eqCurvePoints` and `fillShapes` move from editor/soundfx/eqView to core/soundfx/parametricEq. Tab and node draw the sum from the same function. #374, the spectrum: - A node marked `tapped` gets a `tap` stage in front of its own stages and one behind them when compiled, in a sound FX and in an instrument alike. Its id is asset and node, since a copied asset keeps its node ids. - A tap is a gain of 1. SpectrumTaps (new, viewport/spectrum.ts) holds the tap of every voice and bus while it plays. - While the EQ tab is seen, in the tab row or in a window, the taps of that node feed one analyser per side (8192 points). Nothing is made before a tap of the node plays, so no AudioContext is opened early. - The tab draws both behind the curve, on a scale of 0 to -96 dBFS: the sound coming in faint and grey, the sound going on in the colour of a sound port. The analyser smooths it, and once the sound has gone the sum still hands it silence, so it falls away. - Once the tab is not seen, Editor.tick lets the analysers go, like the meters of the Song tab. - A tap does nothing to the sound, so `stats().last.stages` leaves it out, and a bypassed EQ keeps its taps. Decided on my own: - Every sound passing the node counts: Play of the sound FX tab, an instrument's keys, a song, a run. The issue proposed that. - The spectrum has no labels of its own. Its scale is in the wiki. Tests: Gate (melektaus-atx) 275 files, 4247 tests (11 new), EXIT 0 e2e 34 (melektaus-atx) ALL PASSED, 98 checks (2 new), twice Counter-checks, each put back by copy and compared with cmp: - The node's curve drawn without its bands: 2 unit tests fail. - The spectrum without the loudest bin between two points: 1 fails. - SpectrumTaps.stop leaving the taps linked: 1 fails. - Taps that never feed the analyser: e2e 34 fails in exactly the spectrum check (frames 0). Run in the container only. The screenshots of the second run were looked at: the blip as one peak behind the curve, and the dip at 4 kHz in the node. Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> |
||
|
adminandClaude Opus 5.5
|
25084f8576 |
Refactoring round 10: split SoundLibrary, fold sound duplicates (#85)
Refactoring round 10 covers everything since round 9 ( |
||
|
adminandClaude Opus 5.5
|
db15422372 |
Keep a bus's level when a tab plays the first sound of a page (#369)
A bus of the mix played at full level, without its sound FX and straight into the master, until something on it changed. It happened when the first sound after loading came from the Song or Pattern tab. - `bus()` looked a bus up before it asked for the audio context. The context made then sets up the whole mix, this bus too, and `bus()` overwrote it with a fresh one at gain 1. - `setMix` does nothing for the same mix again, so the wrong bus stayed until the mix changed. - Since #368 the tabs play into the master, so it was the master's volume and FX that went missing on the first preview. - `bus()` now asks for the context first and looks the bus up after. Tests: - Unit sound-library, buses, master-routing: 139 green, 1 new. - The new test was red before the fix: mix:b at gain 1 into the master instead of 0.25 into mix:a. - Gate (melektaus-atx): CHECK EXIT 0, 274 files, 4231 tests. Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> |
||
|
adminandClaude Opus 5.5
|
0e73fd85b9 |
Route sounds, songs and buses in one Master routing graph (#351)
A project bus could only go into one other bus, and a sound, an
instrument, a pattern or a song into exactly one bus. A shared reverb
needs a sound to go there in part and on dry at the same time. Instead
of a list of sends on every asset, the project gets one routing graph
like the routing of a song (#350), one level up.
- Menu -> Master routing opens a tab with one graph per project. It has
a node per sound, instrument, pattern, song and bus, named after its
asset, and one Master. Embedded assets have none, their song routes
them.
- The nodes follow the assets. Every edit settles the routing in the
same undo step (KeepRoutingCommand), so an undone delete brings the
links of its asset back. A new asset gets a node and a link to the
master. What went only into a deleted bus goes to the master.
- New nodes start in three columns: what plays, the buses, and the
master a row above, so no link into it runs behind a bus.
- Links are sends: -60 to +12 dB, and a Mode on links out of a bus or a
song. Out of a sound, an instrument or a pattern a link always takes
the sound after its volume and FX. Loops are refused.
- A node without a link is silent and says "Goes nowhere".
- The rows Bus and Into are gone. Play nodes with a picked bus still
overrule the routing.
- A click on a node shows its asset in the inspector, the Master shows
the master volume and sound FX. A double click opens the asset's tab.
- The graph lives in project.routing and is held to the assets when a
project is read, but nothing is added there. The editor adds the
nodes when it opens a project. An asset without a node plays on the
master, so old projects sound as before without a migration.
- In the mix an asset with one link at 0 dB goes straight into that bus.
A sound or instrument with more gets a bus of its own with the sends.
A pattern or song sends from the master of its playing, which is
where its Mode taps. Buses of the mix can have sends now too.
Found:
- The check "the scheduler plans a looped bar" in e2e 34 wobbles. It
failed in 2 of 5 runs here and in CI task 580 at
|
||
|
adminandClaude Opus 5.5
|
490fcba88f |
Meter each track and the song, and limit the output at -1 dBFS (#359)
A song could clip at the output without anyone noticing: a track and a sound item at +12 dB each add up to +24 dB. The Song tab now shows how loud each track and the whole song are, and a fixed limiter behind the master keeps every sample under -1 dBFS in the editor and in the game. - Each track head has a stereo meter up its right edge. The head is 190 px wide instead of 176. - Out sits in the corner above the heads, with the loudest peak since Play in dB. In the tab header it made the row too wide for a 1280 px window, and the inspector lost its fields. - The meters read AnalyserNodes beside the buses, one per side after a channel splitter, so a peak panned hard is not halved. They are tapped only while the song plays and its tab is shown. - A clip lamp lights past 0 dBFS and stays through Stop. The next Play or a click on the meter puts it out. - The meter of a track that mute or solo keeps from being heard is grey. - Music always plays through a bus of its own, with or without a sound FX. That bus is what Out measures. - The limiter is the one from #326 and needs the FX worklet. Until that is loaded the master goes straight out. - It is 5 ms late. latency() counts that in, so the playhead and the alignment of a recorded take follow it. - Unit tests build SoundLibrary without the limiter, as their wiring checks follow every node of a voice. - Out shows "-inf" while nothing was loud. The UI font has no infinity sign, which the font test found. Tests: - Unit meter-view 8 new, sound-library 112 (2 new), 3 counter-tests each red - e2e 65 (melektaus-atx): ALL PASSED, 55 checks (3 new). Out wrote +16.6 dB, behind the limiter the loudest sample was 0.8913 - Gate (melektaus-atx): 272 files, 4209 tests, one red in the font test. Fixed after it, then the font and meter tests ran green. Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> |
||
|
adminandClaude Opus 5.5
|
25c1d02b06 |
Keep the audio thread free of ended voices and too many vocoders (#356)
A song that had been played a few times in a long session stuttered at regular intervals until the page was reloaded. A quick run up the keys of a sampled instrument made every sound drop out for a second or two. Both came from work the audio thread should not have had. - Every worklet node of a voice listened on its port. Chrome never collects a port that is listened to, and through its listener not the voice either. Every node of the voice stayed on its bus and was worked on in every block. A way or stage on the worklet now closes its port once it ends or is stopped, and the processor closes its own side when it is told to stop. - A voice without echoes now leaves its bus as soon as its sound and what its stages hold back are through. Before, only a voice with echoes did. - At most 12 ways play through the pitch worklet at once. One more cuts the oldest in 10 ms, a note already let go before one still held. Each runs a phase vocoder, whose first block alone took 2.7 ms of the 2.67 ms a block has on stein2. - Play for the game ends everything the tabs play: the piece holding the transport and every key or preview (`stopPreviews`). - Closing a Sound, Sound FX, Instrument, Pattern or Song tab stops what it plays of that asset (`AssetTabEditor.closed`). - A preset in the Instrument tab plays nothing any more. With Audition on it is heard like any other change. - Test hooks: `__gm.instrument.play`, `__gm.sound.playing`, and `vocoders` in the stats of the sound library. Measured: - A copy of the project, its Song 2 played for 12 s and stopped, six times (Chrome on stein2, CDP WebAudio): before, 746 nodes were left after the first time and 4469 after the sixth, the load at rest grew from 0.01 to 0.06. After, 7 nodes are left every time (the master and one bus) and the load at rest stays at 0.01 to 0.02. - Pitch-player voices live in Chrome on melektaus-atx: 12 take 0.50 of the audio thread, 16 take 0.71, 24 take 0.99. 30 struck 40 ms apart held it at 0.99 from the first second on. Tests: - Unit sound-library: 110 green (3 new), 4 counter-probes each red - e2e 34 (melektaus-atx): ALL PASSED, 86 checks (3 new, 2 changed) - e2e counter-probe with game start and preset undone: their 3 checks red, and the old check of Play note in the game as well, which now counts on the preview being gone - e2e counter-probe with tab close undone: exactly its check red. A first form of it held a key and stayed green, since the keys let go of a held key by themselves once the tab shows no asset - Gate (melektaus-atx): 270 files, 4181 tests Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> |
||
|
adminandClaude Opus 5.5
|
7a17030472 |
Give every sound FX effect a Bypass and a Wet (#354)
A node could only be taken out of a sound FX by unplugging it, and only six of them could be blended with the sound they get. Every effect now has both, in the sound FX graph and in the instrument graph alike. The Mix, the Input and the Output have neither. - Bypass is a checkbox setting. A bypassed node is left out when the graph is compiled, so it costs nothing and holds nothing back. The graph draws it faded, and its body says "Bypass: true". - Wet is a number input like the others. It can be a parameter, be moved by Set sound FX parameters and, where the node allows it for its other numbers, follow an Envelope. - A blend is a stage of its own (`wet`) around what the node adds. The sound as it came in is held back as far as the node is late, so a Compressor, a Limiter or a Vibrato do not comb it out. - The six nodes that had a Mix keep their key `mix` and only call it Wet. Saved values, parameters and edges stay as they were. - The Delay crossfades now: the sound alone at 0, the sound and its echoes in full at 0.5, the echoes alone at 1. Before, the sound was always in full and `mix` was the echoes. - The Pitch takes its semitones by Wet instead of blending, through a share `times` on the amount that an instrument binds as well. Findings: - A Delay saved before this sounds different. It sounds the same at half its old value. The two chip presets with a Delay (Echo Lead, Bell) are halved to keep their sound. - Project cbbf160bb7e8 has two Delays (mix 1 and 0.5). They are left as they are. Tests: - Unit: soundfx 65 (8 new), sound-library 107 (3 new), instrument 35 (1 new), envelope 13. Two delay tests and the filter ports test follow the new numbers. - Counter-checks: 8, each turns its test red. - e2e 34 (melektaus-atx): ALL PASSED, 83 checks (2 new). The ping-pong check at wet 0.25 measures what it did at mix 0.5. - Gate (melektaus-atx): CHECK EXIT 0, 268 files, 4154 tests. - After the gate the derived ports of a blend are asked for once instead of twice: typecheck, lint and the three unit files green again (113 tests). Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> |
||
|
adminandClaude Opus 5.5
|
d349251a01 |
Put a sound in a room, a hall or a cave with a Reverb node (#328)
A sound FX had no space around it. The Reverb node folds the sound with an impulse response: one it makes itself, or a sound asset as the answer of a real space. It works on a voice and on a bus. - Type: Room, Hall, Cave and Plate have fixed numbers. Custom shows Decay (up to 10 s), Damping and Pre-delay. Sound shows the pick of a sound asset and Pre-delay. The rows are derived ports, the sound pick an idle param, so they only appear for their type. - The made impulse response is seeded noise per side, 60 dB down at Decay, through a low-pass closing from 20 kHz toward 500 Hz as far as Damping says. It is made once per rate, decay and damping, the last 16 are kept. - A sound as impulse response: the sound FX compilers now get the project, so a node can turn a sound asset into its file. The build key holds that file, so a cut or swapped sound builds again. The instrument compiler does the same for a Reverb inside an instrument. - The library loads that file with the voice, a sequence or before a bus builds its chain. A missing file leaves the reverb silent. - Mix blends dry and reverb and is the only number that moves while the sound plays, as the issue said. The voice rings for pre-delay plus decay, or as long as its sound. - The open point from #325 about sends on project buses is #351, not part of this. Tests: - Unit reverb (new) 4, soundfx 57 (4 new), sound-library 104 (2 new), green. - Counter-checks, each turns one test red: the impulse file not loaded with the voice, the tail without the length of the sound. - e2e 34 (melektaus-atx): ALL PASSED, 81 checks (1 new). Chrome offline: silent during the pre-delay, 35.9 dB fall over 0.6 s of a 1 s decay (36 expected), the dry half at 0.25 for mix 0.5. A sound with one sample at 0.2 s gives the impulse back 0.25 s later and nowhere else. - Gate (melektaus-atx) over the end of this series #318 to #328: CHECK EXIT 0, 267 files, 4134 tests. Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> |
||
|
adminandClaude Opus 5.5
|
071f194326 |
Swing the volume or the pitch with Tremolo and Vibrato (#320)
Alarms, sirens and wobbly retro sounds need a volume or a pitch that swings. Two new nodes do that, on a voice and on a bus alike. - Tremolo: Rate (0 to 20 Hz), Depth (0 to 100 %), Shape (Sine, Triangle, Square, Saw). The volume swings between full and 1 - depth. - Vibrato: Rate (0.5 to 20 Hz), Depth (0 to 4 semitones), Shape. The shape is the curve of the pitch, a Square jumps between two pitches. - As the issue decided: two nodes, phase 0 on the first sample of the voice, no fade-in time. Both run on the FX worklet, the classes are in lfo.ts and tested in Node. - Deviation from the issue text, as in the plan: the Vibrato is a delay that swings, not playbackRate. A bus has no playbackRate, and the sound keeps its length. - The delay swings around a center taken from the start values. The center counts as the latency of the node, so a voice starts that much earlier and a Mix and a bus make up for it. - Known limit, in the node text and the wiki: a depth turned up or a rate turned down after the start asks for a delay below 0. The lower half of the swing then flattens. Finding: the first e2e run was red at the edge of a window. The phase is summed up, so the square flips one sample later than 2400 steps of 10/48000 suggest. The check keeps 10 samples away from the edges. Tests: - Unit lfo (new) 5, soundfx 53 (2 new), sound-library 102 (1 new), green. - Counter-checks, each turns one test red: the swing turned over (up and down swapped), the start time not passed to the worklet. - e2e 34 (melektaus-atx): ALL PASSED, 80 checks (1 new). Chrome offline: Tremolo square silent before its voice, then 0.5 and 0 for 50 ms each. Vibrato square at 5 Hz, 1 semitone: 1059.5 Hz and 940.5 Hz. - The gate runs once on the last commit of this series. Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> |
||
|
adminandClaude Opus 5.5
|
d3a4cb7d0e |
Warm up or distort a sound with a Saturation node (#323)
A sound FX had no way to bend a sound. The Saturation node pushes it into a curve, from warmth to a hard distortion, on a voice or a bus. - Eight types, each a fixed curve made once: Soft (tanh), Cubic, Hard clip, Tube, Fuzz, Foldback, Sine fold and Rectify. The issue asked for as many as useful. - Drive (0 to 48 dB) is a gain in front of the curve. The curve spans 256 times full scale, so the drive glides like any gain. - Output and Auto-gain blend as on the Compressor. Auto-gain brings a sine at -12 dBFS back to the RMS it came in with. - Tone is a low-pass after the curve, 1 kHz at 0 to 20 kHz at 1, as recommended in the plan. A 10 Hz high-pass takes out the DC the lopsided types make. - Mix blends with the dry sound. The 4x oversampling is 192 samples late in Chrome, so the dry way is held back as far. The node counts as late by that much for voices, Mixes and buses. - A test hook gives e2e the auto-gain at a drive. Tests: - Unit saturation (new) 5, soundfx 51 (2 new), sound-library 101 (1 new), green. - Counter-checks, each turns tests red: no hold-back of the dry way (1), the level without auto-gain (2). - e2e 34 (melektaus-atx): ALL PASSED, 79 checks (1 new). Chrome offline: 192 samples late at 48 and at 44.1 kHz. Half dry at 1125 Hz 0.00 dB. A sine at -12 dBFS driven 24 dB into Soft comes out at 0.00 dB with full auto-gain. - The gate runs once on the last commit of this series. Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> |
||
|
adminandClaude Opus 5.5
|
a645026568 |
Tame the loudness with a Compressor and a Limiter node (#326)
A sound FX could not control dynamics. A Compressor squeezes the loudness together, and a Limiter keeps every peak below a line. Both work on a voice and on a bus, where they tame everything at once. - Compressor: DynamicsCompressorNode with Threshold, Ratio, Knee, Attack and Release, then Makeup and Auto-gain from 0 to 1. After the node the sound gets (1 - w) * makeup + w * A dB. A is what the curve takes off at 0 dBFS. - The node adds 0.6 of A by itself, as the spec says. That gain is taken back out, so 0 really means no makeup. - The knee shape is left to the browser by the spec. dynamics.ts ports Chromium's curve. It gives the gain Chrome was measured to add at four settings to three places. - Limiter: a class on the FX worklet with Threshold, Ceiling, Release and Auto-gain. It looks 5 ms ahead: the smallest gain of the window ahead, averaged over the window, then a release. No sample passes the lower of threshold and ceiling. Auto-gain raises it toward the ceiling. - Deviation from the plan in the issue: the Limiter has a Threshold as well. Without it Auto-gain has nothing to measure against. - Latency is made up on voices now too. A voice starts as much earlier as its stages are late (Compressor 6 ms, Limiter 5 ms). The other way of a Mix and the other layers of a note are held back to the latest, and a bus counts it into its latency. - A voice with a Limiter counts as ringing, so the worklet is stopped only after what it still holds is out. Tests: - Unit dynamics (new) 8, soundfx 49 (3 new), sound-library 100 (4 new), green. - Counter-checks, each turns tests red: no look-ahead in the Limiter (3), no taking back of the node's gain (1), a voice not started earlier (1), no stage latency on a bus (1), no hold-back in a Mix (1). - e2e 34 (melektaus-atx): ALL PASSED, 78 checks (1 new). Chrome offline: Compressor 288 samples late, Limiter 240. Full scale through -12 dB 4:1 hard knee: +0.19 dB with full auto-gain, -8.81 dB without. A sine at 2 through the Limiter at -6 dB peaks at -6.00 dB, with auto-gain 1 at -1.00 dB. - The gate runs once on the last commit of this series. Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> |
||
|
adminandClaude Opus 5.5
|
c99bda6489 |
Move a sound left or right with a Pan node (#319)
A sound FX had no way to place a sound in the stereo field. The new Pan node does that on a voice, a bus and a track alike. - One input, Pan from -1 (left) to 1 (right), 0 by default. Behind it is a StereoPannerNode. A typed-in 0 leaves the node out, a pan fed from a parameter stays at any value. - It moves with Set sound FX parameters, and an Envelope can move it in an instrument. - As the issue decided, no pan from the position in Play sound and no width control for stereo sounds. Finding: the issue and the plan said a stereo sound gets a balance. Web Audio pans stereo differently: the side it goes to stays and the other side moves over into it. The node description and the wiki say so, the e2e check measures it. Tests: - Unit soundfx 46 (1 new), sound-library 97 (1 new), green. - Counter-check: a pan from a parameter at 0 left out, 1 test red. - e2e 34 (melektaus-atx): ALL PASSED, 77 checks (1 new). Chrome offline, a mono sine at 0.5 gives 0.5 / 0 at -1 and 0.354 / 0.354 at 0. A stereo one at 0.5 panned 0.5 gives 0.354 / 0.854. - The gate runs once on the last commit of this series. Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> |
||
|
adminandClaude Opus 5.5
|
e1ca6a5f5a |
Shape a sound with every filter type, a Q and a slope (#318)
The Filter node from #335 only knew low-pass, high-pass and band-pass and had a Resonance from 0 to 1. It now has every type Web Audio offers, a Q as a plain factor and a slope up to 48 dB per octave. - Types: low-pass, high-pass, band-pass, notch, low shelf, high shelf, peaking and all-pass. The cutoff row is now labelled Frequency, its key stays `cutoff`. - Q from 0.1 to 30, 0.707 by default, replaces Resonance. Web Audio takes the Q of a low- or high-pass in dB, so it is converted when the voice is wired. No project used the node. - Gain in dB is an input only for the shelves and the peak. It is a derived port, so the sound FX compiler now resolves derived ports. - Slope 12, 24 or 48 dB/oct runs 1, 2 or 4 filters in a row. They share one cutoff carried by a ConstantSource, only the last has the Q. Shelves, peak and all-pass hide the row. - The Chip Presets get the Q their resonance gave before. Mutate moves Q in octaves and gain by up to a dB. - bindStage in the instrument compiler binds every amount of a stage generically, so new stages need no case of their own there. Finding: FLAT_Q was in dB and the delay damping used it. It is a factor now, the damping takes it through passQ and is unchanged. Tests: - Unit envelope 13, sound-library 96 (2 new), chip-presets 14, soundfx 45, all green. - Counter-checks: the Q on every filter in a row, the gain row for every type. Each turns one test red. - e2e 34 (melektaus-atx): ALL PASSED, 76 checks (1 new). Chrome offline, 2 kHz through a low-pass at 1 kHz: -12.37 dB at 12 dB/oct, -49.5 dB at 48. A +6 dB peak gives 6.00 dB, a notch -124 dB. - The gate runs once on the last commit of this series. Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> |
||
|
adminandClaude Opus 5.5
|
daeffe0f9d |
Route the tracks of a song through a graph (#350)
Every track of a song went straight into its output. Now the Song tab has a second view, Routing: a graph with a node per track and one Output, the links between them sends. A track can go into other tracks, into several at once, and a link has its own volume and the point of the track it taps. - The song asset has a graph like an instrument (SongTrack, SongOutput). heldSongGraph keeps it in step with the tracks on load and in SetSongCommand: a node per track named after it, one output, a new track and every track of an old song linked to the output. Links of gone tracks, doubled links and links closing a loop are dropped. - A link carries an optional send (volume in dB, tap). The inspector shows Volume and Mode for a picked link of a song: Post volume (Post pan), Pre volume (Post FX), Pre volume (Pre FX). SetSendCommand. - NodeDef has two new flags. `fixed` nodes are never added or deleted by hand. Links between `acyclic` nodes may not close a loop, checked in canConnect, dropTargetPort and ConnectCommand. - songBuses gives each track its sends instead of one `into`, and a bus `song:<song>:<track>:#items` for its own items. That bus is what solo closes on a track that only passes a soloed one on. - Mute and solo now act on the sends (trackGates). A muted track passes nothing on, on any tap. A soloed track is heard with what goes into it, through the tracks it goes through, their own items silent. Only sends on a way through a soloed track stay open, so a track going into it and into the output is heard through it only. - SoundLibrary: a bus has either `into` or sends. Each send is tap, delay, level, target. busLatency takes the latest way (arrivalOf), and each send is held back so all ways of a track arrive together (sendDelays). Taps are wired again whenever a chain comes or goes. - The Song tab has Timeline and Routing in its header. The routing uses GraphCanvas with an empty palette. A track linked nowhere shows "Goes nowhere". Delete takes links, never a track node. - Game playings route the same way, the output being the master of the playing. Decided without asking: a send ranges -60 to +12 dB like a track, default 0 dB Post. Mute closes the sends, the track's own level stays. Found on the way: the inspector built the Mode row with the send as it was when the rows were made. Setting Volume and then Mode wrote the old volume back. Both rows now read the current send when they change. Tests: - Unit song-routing (new): 13 green. Sound library: 4 new, 94 green. 11 counter-probes (loop on load, canConnect, solo, solo past the soloed track, mute, preFx latency, graph sync, delete guard, delays, taps, glide), each red. - Existing tests adjusted to the new bus names and send shape: song, bus-fx, song-play, graph registry, edge description. - e2e 65 on melektaus-atx: ALL PASSED, 43 checks (5 new). The first run caught the inspector bug. Counter-probe with the old closure: 2 FAILED. - Gate on melektaus-atx: typecheck, lint, format clean, 2 tests red (registry rule, edge shape), fixed and rerun locally: 56 green. - Not rerun after the per-send solo fix: e2e 65 and the gate. Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> |
||
|
adminandClaude Opus 5.5
|
3a52f2290f |
Mix sounds through buses and a master (#325)
Until now every sound went straight to the speakers. There was no point where all of them came together, so nothing could turn the music down against the effects, and a compressor or a shared echo over everything had nowhere to sit. The bus technique of #346 was there already, only the end of the chain was missing. - Bus asset (Audio): Volume, Sound FX and Into. Into is empty for the master and never offers the bus itself nor a bus that already goes into it. The list is worked out when the menu opens, so a change made meanwhile counts. A loop that is in a project anyway sends the buses on it into the master. - The master is no asset. Its volume and sound FX are two new rows under Master in Project settings, one undo step each. A project written before has 1 and none, which is how it sounded. - Sound, instrument, pattern and song have a row Bus, empty for the master. Play sound, Play note, Play pattern and Play song have an input bus: From the asset, Master or a bus. Inside a song or a pattern only the bus of the song or pattern counts. - Set bus volume (bus, volume, time, easing) and Bus volume. An empty bus is the master. The volume set holds for the whole run, across scenes, over that of the asset. GameRun resets it at start and end. Set sound FX parameters without a voice now reaches the sound FX of the bus picked in its new bus input. - SoundLibrary: the master is the bus "mix", each bus "mix:<id>". Every bus, the playing masters of #346 included, ends there, and only the master is heard. setMix sets them up once a context exists, so an editor nobody listened to opens no audio device. The same mix again changes nothing, which lets the editor hand it over on every change of the project. - The tabs play as the game does: Sound, Sound FX, Instrument, Pattern and Song tab through the bus of their asset and the master. - Pause game does nothing to the buses (the user's answer 4b). A game that wants quiet in its pause menu sets a bus volume itself. - Streaming long music files is #349, split off as asked. Finding on the way: the Into menu first worked from a list made when the inspector row was built. After another bus was sent into the open one, e2e 34 saw it still offered. It is now asked on open. The SoundLibrary tests expected voices to end at the destination. They now end in the master, which adds its input, level and pan to every wiring and two gains to every list. Those expectations are updated, nothing else in them changed. Tests: - Unit buses (new): 15 green. Ten counter-checks, each red on its own: loop check, bus picked, reset at run start, bus of Set sound FX parameters, master volume in the settings, and in SoundLibrary default into the master, voices into the master, run volume over the mix, no context before a play, a playing on its bus. - Unit sound-library: 90 green (5 new). Node catalog: 416 green (9 new cases). - e2e 34 (melektaus-atx): ALL PASSED, 75 checks (3 new). The voice of the Sound tab was heard on mix:<bus>, that bus into the other, that one at 0.5 into the master. Master volume 0.6 via the dialog, undo back to 1. - Gate (melektaus-atx): CHECK EXIT 0, 262 files, 4072 tests. Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> |
||
|
adminandClaude Opus 5.5
|
4c7861b5b8 |
Keep the frame rate up while painting a big tilemap (#347)
Painting on the 60x60 map of a project with fifty objects dropped the editor to 20 to 39 fps. A profile of a brush stroke showed four causes, none of them the brush itself. - Each frame of a stroke previews the model. The asset and hierarchy panels then built every row anew, so every label became a new text and a new upload to the GPU. One run spent 46 % of the main thread in those uploads. ListView.setItems now keeps a row whose item draws the same (sameListItem) and builds only the rows that changed. - The brush drew the whole scene on every pointer event, on top of the preview. Now the preview draws what the stroke changed, once a frame. The rectangle tool asks for one drawing a frame for its box. - An animated tile made the view draw in the tick and the preview drew it again in the same frame. animate now asks just before the frame is drawn and stays out when the view was drawn since the tick began. - layoutSymbols ran on every drawing and costs up to the cube of the symbols. SymbolLayoutMemo keeps the spots while no anchor moves. - A painted cell made the map read every "x,y" key again, and once more for each of the eight neighbours of every cell. layerCells reads a layer once per content into an index by place. layerTiles and the blocking cells take their neighbours from there (neighboursIn). parseCellKey reads a key without split, with the same results. The test hook sceneRedraws counts how often the scene view was drawn. Not done: a painted cell still works out the tiles and blocking cells of the whole map again, so that part grows with the map. Tests: - Brush stroke on a copy of the project (stein2, Chrome): 20 to 39 fps before, 47.5 after, 55 to 57 without painting. Labels drawn again during the stroke 2012 before, none after. Scene drawings per frame 1.32 before, 1 after. - One painted cell, headless: 28 to 16 ms on 60x60, 109 to 49 ms on the same map doubled to 120x120. - frame-preview: 2 new, red with the old pointer redraw. - tilemap: 3 new (key reading, index, refresh), list-ping 1 new, symbol-layout 1 new. 5 single reversals turned each red. - e2e 39,40 (melektaus-atx): ALL PASSED, 107 checks (1 new, a fast stroke: 6 drawings in 6 frames, no label drawn again). With the row reuse and the pointer redraw reverted it fails: 24 drawings in 3 frames, and the panels draw their labels again. - Gate (melektaus-atx): CHECK EXIT 0, 260 files, 4038 tests. Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> |
||
|
adminandClaude Opus 5.5
|
101b12504e |
Play a sound backwards with a Reverse switch on the asset (#321)
A sound asset can now play its stretch backwards. The switch sits on the asset, so every way the sound is heard plays it reversed: Play sound, a song item, an instrument's Sample and a Pitch in a sound FX. There is no Reverse node in the sound FX graph. The user dropped it, because playing backwards needs the whole sound in advance, which a bus or a Chip does not have. - The cut gets a `reverse` flag, stored as the asset property `reverse` (default off). The cut name ends in `~reverse` when it is on, so a reversed sound over the whole file is a cut of its own. - The handles keep marking the same part of the file. The reversed copy is made once, like any cut, and the fades follow what is heard: Fade in ramps at the end handle, Fade out at the start handle. - The Sound tab has a toggle with a left-pointing play triangle. Its playhead runs from right to left, and the wave draws the ramps at the edges they now belong to. The inspector has a Reverse row. - The icon is a tab header icon (`HEADER_ICON_SVG`, next to the snap magnet), not a top bar icon. The first gate run had it in the top bar set, and the test that fixes that set went red. - A song item draws the waveform of a reversed sound backwards. Lengths stay as they are. - The header label reads "Fade in" instead of "Fade in (ms)" and the fade fields are 8 px narrower. With the new button the readout was cut to "0.03 s of 0..." at 1280 px, now it shows in full. The inspector keeps the unit. Tests: - Unit sounds 22, sound-library 85 (1 new each). Counter-checks: without turning the samples round, without moving the fade in to the end, and without mirroring the peaks, all red. - e2e 34: ALL PASSED, 72 checks (2 new). The reversed stretch starts with the last samples of the forward one, and the playhead ran 0.75, 0.60, 0.45, 0.30, 0.15 over the whole file. - Gate: first run red, 1 of 4031 (the top bar icon list). After moving the icon, CHECK EXIT 0, 260 files, 4031 tests. Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> |
||
|
adminandClaude Opus 5.5
|
b519cd192f |
Send a track, a pattern item or a whole song through a sound FX (#346)
A sound FX could only be put on a single sound. Now a track, a pattern item, a Play pattern and a Play song send everything they play through one chain of it, as an insert in a DAW. A Play note gets one of its own. - Track: an FX box in the head next to M and S opens a menu of the project's sound FX, and the track's inspector has the row too. Order: items, track FX, volume, pan. - Pattern item: Sound FX in its inspector. Its notes play on a bus of their own into the track's bus. - Play pattern and Play song take fx and fx params. The chain sits on the master of the playing, after the tracks and before the level and the fades. Set sound FX parameters reaches it by the playback. - Play note takes fx and fx params next to the instrument's params. The FX parameters go by "fx:" so the two sets stay apart. Set sound FX parameters on a note changes a name both have in both. - A Pitch on a bus is a new PitchShifter: the phase vocoder of the PitchPlayer, fed while it plays. It cannot look ahead and is exactly one frame late at every pitch, 2048 samples. - That latency is made up. The other way of a Mix is held back by a delay of the same length. Every note and clip starts as much earlier as the buses it passes are late. The scheduler plans that much further ahead, and the first note waits that much after Play. - The Song tab waits for the chains before it plays and lets its buses go a moment after Stop. A playing in a game lets them go after its echoes and what the shifters still hold. - songBuses moved to its own file. Kept in song.ts it pulled the FX compiler into the node registry through an import cycle. Decisions of the user: one chain for the whole (1a), FX everywhere asked for (2a), Set sound FX parameters on playbacks (3a), and a pitch shifter of its own with exact latency compensation for a Pitch on a bus. Tests: - Unit pitch-shifter (new): 11 green. At 0 semitones the output is the input 2048 samples later, off by at most 1.2e-7. - Unit sound-library: 84 green, 8 new. Counter-checks (no early start, no Mix delay, chain made every time, tune misses the master) each turned their test red. - Unit bus-fx (new): 6 green, 4 counter-checks red. Scheduler ahead: 1 new, its counter-check red. - e2e 65 (melektaus-atx): ALL PASSED, 35 checks, 4 new, first run. Chrome at 44.1 kHz: the bus was 0.046440 s late, the note started exactly that much early. Offline the shifter moved 1 kHz to 2000 Hz and passed a click 2048 samples later. - Gate (melektaus-atx): CHECK EXIT 0, 259 files, 4021 tests. Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> |
||
|
adminandClaude Opus 5.5
|
01fd6e6464 |
Swirl and comb a sound with a Phaser and a Flanger node (#341)
sfxr's "phaser" is a comb filter, the sound plus a copy delayed by up to 2.9 ms. That is a flanger, not the phaser a guitarist knows. Both effects come in as nodes of their own, so each name fits its sound and sfxr is covered in full. Both run on the FX worklet like the Bitcrusher, because a feedback loop in Web Audio costs a render quantum per round. - Phaser: first-order allpasses (Stages 2, 4, 6, 8, 12) around Frequency, moved by a sine LFO Depth octaves wide at Rate Hz, with Feedback and Mix. An Envelope can move Frequency and Mix. - Flanger: a delay line of Offset ms. Sweep moves it on in ms/s from the start of the voice, an LFO adds up to Depth ms. As in sfxr the delay is mirrored at 0, and it never goes past 20 ms. Feedback comes back exactly one delay later. An Envelope can move Offset and Mix. - Mix 0 leaves the sound as it is, 1 is half sound and half copy. The notches are deepest there and the peaks stay at the sound's level. sfxr adds both at full, so its sound comes out 6 dB louder. - The Flanger's processor gets the start of its voice and begins the sweep on that sample. stageNodes takes it as a new argument `at`. - Explosion gets a Flanger in one draw out of two, with sfxr's offset and sweep and no LFO. Offset is offset^2 * 2.89 ms, Sweep is ramp^2 * 125 ms/s, signed so the direction holds. - Randomize draws a Flanger's offset and sweep like sfxr. Its LFO and feedback and all of a Phaser are drawn within bounds of their own. Mix and Stages stay, as a Bitcrusher's Mix does. Mutate moves them too, and a 0 stays 0. - New instrument preset Phased Pad: saw, Envelope, low-pass, Phaser of six stages. The other 14 are unchanged. - The Bitcrusher's worklet setup is now shared with both nodes (workletNodes), its behaviour is unchanged. Tests: - Unit phaser (new): 8 green. Counter-check with clamping at 0 instead of mirroring and a flipped allpass coefficient: 3 red. - Unit soundfx, sound-library, chip-presets: 45 / 76 / 14 green. Counter-checks: start time not passed on, phaser frequency eased linearly, sweep sign dropped, Phaser left out of Mutate, each red. - Unit core, viewport, graph: 179 files, 2979 tests green. - e2e 34 (melektaus-atx): ALL PASSED, 70 checks (1 new), first run. Chrome offline: 1 kHz notch RMS 0.0000 with two stages, 0.5657 with four. Flanger echo after 48 samples, swept echo at 533/534. About 47 Phasers (12 stages) or 63 Flangers fill the audio thread. - Gate (melektaus-atx): CHECK EXIT 0, 257 files, 3991 tests. Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> |
||
|
adminandClaude Opus 5.5
|
29b604dc07 |
Fade a sound's start and end apart, each along its own curve (#345)
A cut sound had one edge fade for both ends, always a straight ramp. Now its start and its end each have a fade of their own, and each fade has a curve of its own. - Fade in (ms) and Fade out (ms) replace Edge fade (ms), 5 ms each by default. Like before they apply only to an edge inside the file. - Fade in curve and Fade out curve each offer Linear (the default), Equal power, S-curve, Exponential and Logarithmic. A fade out runs its curve backwards. - The Sound tab's header has a field and a curve dropdown per edge. Each dropdown shows its curve as a small picture, rising or falling, and names it in its tooltip. With two named dropdowns the header was too wide at 1280 px and cut off the readout on the right. - The inspector shows the same four rows, the curves by name. - The wave draws each ramp in its curve rather than as a line. - A cut plays by <file>#<start>~<end>~<fadeIn>~<fadeOut>~<curveIn>~<curveOut>. - No migration, as asked in the issue: the old fade key is no longer read, so saved sounds start with 5 ms each and Linear on both. Tests: - Unit sounds, sound-library: 96 tests - Counter-check (fade out along the fade in's curve): 1 red - e2e 34 (melektaus-atx): ALL PASSED - 69 checks - Gate (melektaus-atx): CHECK EXIT 0, 256 files, 3978 tests Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> |
||
|
adminandClaude Opus 5.5
|
f46b2316f2 |
Make 8-bit sounds without a file with a Chip node in instruments (#329)
An instrument could only play sound files so far. The Chip makes the sound of a note itself, the way old game consoles and sfxr did: a raw wave and what its frequency does over the note. A laser, a jump or a pickup is now an instrument and ends by itself. - Chip node with wave (square, triangle, saw, sine, noise and the periodic noise of the NES), follow note, frequency, duty, duty sweep, slide, delta slide, min frequency, vibrato, arpeggio and repeat. It counts in Hz, semitones and seconds, not sfxr's 0 to 1. - It runs as a third processor in the FX worklet. The math is a plain class, ChipPlayer, tested in Node. Every sample is worked out 8 times and averaged, as sfxr does. - Frequency and duty are AudioParams, so an Envelope can move them and a parameter can tune them while the note plays. A Pitch behind a Chip moves its frequency directly, without the phase vocoder. - Below its min frequency a Chip ends and tells the page. Without the worklet it is silent and its note ends at once. - An Envelope with sustain 0 now ends its note once the decay is over, for every source under it, Samples too. Before, a note with duration 0 ran on silently until a Stop sound. - A note made of Chips alone needs no file. playNote and the wait for the bytes no longer drop it for having none. - Inputs that do nothing as things stand are grey in the inspector. idleParams is told which inputs are connected, so a connected one always counts. The credit names sfxr (Tomas Pettersson, MIT) and jsfxr, which turned out to be public domain, not MIT as the plan in #329 said. Tests: - Unit chip (new) 12, sound-library +4. All of tests/core, tests/viewport, tests/editor/graph and tests/editor/inspector: 178 files, 2953 green. - Counter-checks: semitones read as /24 turn 4 chip tests red. Without the sustain rule and the file check 4 library tests fail. - e2e 34 (melektaus-atx): ALL PASSED, 60 checks (2 new). Offline in Chrome a square at 220 Hz plus 12 semitones and duty 0.25 gave 329 periods in 0.75 s, up 0.249. 64 noise voices for 2 s rendered in 2.0 s, about 63 at once. Live a 0.2 s note with sustain 0 was gone after 0.26 s. - Gate (melektaus-atx): CHECK EXIT 0, 255 files, 3962 tests. Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> |
||
|
adminandClaude Opus 5.5
|
165f022fc0 |
Crush a sound to fewer bits and a lower rate with a Bitcrusher (#322)
A new effect for sound FX and instruments makes a sound rough like an
old console. It rounds the sound to fewer steps and holds it at a lower
sample rate, and all three of its numbers move while the sound plays.
- Bitcrusher node with bits (1 to 16, not only whole), rate (100 Hz to
48 kHz, sample-and-hold) and mix. A mix typed in at 0 leaves it out.
- It runs on the audio thread as a second processor next to the pitch
player. The module is now fxWorklet.ts and the test hook is called
fxWorkletUrl.
- A play that needs the worklet waits for it, for a Pitch or a
Bitcrusher alike. Without the worklet the sound goes through as is.
- Bits and mix move in what they hold, the rate in octaves. An
Envelope can move all three in an instrument.
- A stage that runs on the worklet is stopped with its voice, like the
drivers of an Envelope or a Mix.
- The math is a plain class, Crusher, so it is tested in Node.
The cleanup check of e2e 64 from
|
||
|
adminandClaude Opus 5.5
|
f1f4a57589 |
Cut a sound to a stretch of its file in its own Sound tab (#343)
A sound asset now opens in a tab that shows its file as a waveform. Two handles set where the sound starts and ends in the file, and that stretch is the sample: Play sound, a song item and an instrument's Sample all play it and nothing else. The file itself is never changed. - The asset has three new rows: Start (s), End (s) and Edge fade (ms). End 0 is the end of the file, the fade is 10 ms by default. Older assets have no values and play the whole file as before. - Every way of playing asks playedSoundOf() for a name instead of the file: the file, or <file>#<start>~<end>~<fade> for a cut. - SoundLibrary makes the cut from the decoded file the first time that name plays and ramps each edge inside the file over the fade. Length and peaks of a cut are read from the file without a copy. - Cut buffers can be made again at any time, so the library lets the oldest go past 64 Mi samples. A voice holds its buffers itself. - The tab draws min/max per pixel from 256-sample block peaks, and the samples as a line when zoomed in far. Wheel zooms, the middle button pans, as in the music tabs. Wave, cut and ruler sit under a mask, so a handle panned out of view does not draw over the panels beside. - Dragging a handle moves that edge, dragging elsewhere spans a new stretch. One drag is one undo step for both edges. Whole file puts the handles back, Play or Space plays the stretch with a playhead. - The inspector preview and the Sound FX preview play the cut too, and the song lanes draw and repeat it. Tests: - Unit: sounds 20, wave-view 8 (new), sound-library 68, plus 258 in the touched areas (instrument, song, pattern, inspector, tabs) - e2e 34 on melektaus-atx: ALL PASSED, 57 checks (7 new) - Gate on melektaus-atx: CHECK EXIT 0, 253 files, 3936 tests Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> |